//// Эта функция пайп не закрывает!
//void CGuiServer::GuiServerThreadCommand(HANDLE hPipe)
BOOL CGuiServer::GuiServerCommand(LPVOID pInst, CESERVER_REQ* pIn, CESERVER_REQ* &ppReply, DWORD &pcbReplySize, DWORD &pcbMaxReplySize, LPARAM lParam)
{
BOOL lbRc = FALSE;
CGuiServer* pGSrv = (CGuiServer*)lParam;
if (!pGSrv)
{
_ASSERTE(((CGuiServer*)lParam)!=NULL);
pGSrv = &gpConEmu->m_GuiServer;
}
if (pIn->hdr.bAsync)
pGSrv->mp_GuiServer->BreakConnection(pInst);
gpSetCls->debugLogCommand(pIn, TRUE, timeGetTime(), 0, pGSrv ? pGSrv->ms_ServerPipe : NULL);
#ifdef _DEBUG
UINT nDataSize = pIn->hdr.cbSize - sizeof(CESERVER_REQ_HDR);
#endif
// Все данные из пайпа получены, обрабатываем команду и возвращаем (если нужно) результат
#ifdef ALLOW_WINE_MSG
if (gbIsWine)
{
wchar_t szMsg[128];
msprintf(szMsg, countof(szMsg), L"CGuiServer::GuiServerCommand.\nGUI TID=%u\nSrcPID=%u, SrcTID=%u, Cmd=%u",
GetCurrentThreadId(), pIn->hdr.nSrcPID, pIn->hdr.nSrcThreadId, pIn->hdr.nCmd);
MessageBox(szMsg, MB_ICONINFORMATION);
}
#endif
switch (pIn->hdr.nCmd)
{
case CECMD_NEWCMD:
{
// Приходит из другой копии ConEmu.exe, когда она запущена с ключом /single, /showhide, /showhideTSA
DEBUGSTRCMD(L"GUI recieved CECMD_NEWCMD\n");
LPCWSTR pszCommand = pIn->NewCmd.GetCommand();
_ASSERTE(pszCommand!=NULL && "Must be at least empty string but NOT NULL");
if (pIn->NewCmd.isAdvLogging && !gpSetCls->isAdvLogging)
{
gpSetCls->isAdvLogging = pIn->NewCmd.isAdvLogging;
gpConEmu->CreateLog();
}
if (gpSetCls->isAdvLogging && (pIn->NewCmd.isAdvLogging > gpSetCls->isAdvLogging))
{
wchar_t szLogLevel[80];
_wsprintf(szLogLevel, SKIPLEN(countof(szLogLevel)) L"Changing log level! Old=%u, New=%u", (UINT)gpSetCls->isAdvLogging, (UINT)pIn->NewCmd.isAdvLogging);
gpConEmu->LogString(szLogLevel);
gpSetCls->isAdvLogging = pIn->NewCmd.isAdvLogging;
}
if (gpSetCls->isAdvLogging)
{
size_t cchAll = 120 + _tcslen(pIn->NewCmd.szConEmu) + _tcslen(pIn->NewCmd.szCurDir) + _tcslen(pszCommand);
wchar_t* pszInfo = (wchar_t*)malloc(cchAll*sizeof(*pszInfo));
if (pszInfo)
{
_wsprintf(pszInfo, SKIPLEN(cchAll) L"CECMD_NEWCMD: Wnd=x%08X, Act=%u, ConEmu=%s, Dir=%s, Cmd=%s",
(DWORD)(DWORD_PTR)pIn->NewCmd.hFromConWnd, pIn->NewCmd.ShowHide,
pIn->NewCmd.szConEmu, pIn->NewCmd.szCurDir, pszCommand);
gpConEmu->LogString(pszInfo);
free(pszInfo);
}
}
BOOL bAccepted = FALSE;
if (pIn->NewCmd.szConEmu[0])
{
bAccepted = (lstrcmpi(gpConEmu->ms_ConEmuExeDir, pIn->NewCmd.szConEmu) == 0);
}
else
{
bAccepted = TRUE;
}
if (bAccepted)
{
bool bCreateTab = (pIn->NewCmd.ShowHide == sih_None || pIn->NewCmd.ShowHide == sih_StartDetached)
// Issue 1275: When minimized into TSA (on all VCon are closed) we need to restore and run new tab
|| (pszCommand[0] && !CVConGroup::isVConExists(0));
RConStartArgs rTest;
if (pszCommand[0])
{
rTest.pszSpecialCmd = lstrdup(pszCommand);
rTest.ProcessNewConArg();
}
bool bSkipActivation = false;
// Может быть пусто
if (bCreateTab && pszCommand[0])
{
RConStartArgs *pArgs = new RConStartArgs;
// New tab must be started with same credentials that calling tab if others was not specified
{
if (!rTest.HasInheritedArgs())
{
CVConGuard VCon;
if ((pIn->NewCmd.hFromConWnd || pIn->NewCmd.hFromDcWnd)
&& CVConGroup::GetVConByHWND(pIn->NewCmd.hFromConWnd, pIn->NewCmd.hFromDcWnd, &VCon))
{
const RConStartArgs& r = VCon->RCon()->GetArgs();
if (r.HasInheritedArgs())
{
pArgs->AssignInheritedArgs(&r);
}
}
}
}
pArgs->Detached = (pIn->NewCmd.ShowHide == sih_StartDetached) ? crb_On : crb_Off;
pArgs->pszSpecialCmd = lstrdup(pszCommand);
if (pIn->NewCmd.szCurDir[0] == 0)
{
_ASSERTE(pIn->NewCmd.szCurDir[0] != 0);
}
else
{
pArgs->pszStartupDir = lstrdup(pIn->NewCmd.szCurDir);
}
LPCWSTR pszStrings = pIn->NewCmd.GetEnvStrings();
if (pszStrings && pIn->NewCmd.cchEnvStrings)
{
size_t cbBytes = pIn->NewCmd.cchEnvStrings*sizeof(*pArgs->pszEnvStrings);
pArgs->pszEnvStrings = (wchar_t*)malloc(cbBytes);
if (pArgs->pszEnvStrings)
{
memmove(pArgs->pszEnvStrings, pszStrings, cbBytes);
pArgs->cchEnvStrings = pIn->NewCmd.cchEnvStrings;
}
}
if (gpSetCls->IsMulti() || CVConGroup::isDetached())
{
gpConEmu->PostCreateCon(pArgs);
}
else
{
// Если хотят в одном окне - только одну консоль
gpConEmu->CreateWnd(pArgs);
SafeDelete(pArgs);
// New window created? Don't activate this one.
bSkipActivation = true;
}
}
else
{
_ASSERTE(pIn->NewCmd.ShowHide==sih_ShowMinimize || pIn->NewCmd.ShowHide==sih_ShowHideTSA || pIn->NewCmd.ShowHide==sih_Show);
}
// gh#151: Do animation after starting tab creation
if (!bSkipActivation && (rTest.BackgroundTab != crb_On))
{
gpConEmu->DoMinimizeRestore(bCreateTab ? sih_SetForeground : pIn->NewCmd.ShowHide);
}
}
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(BYTE);
lbRc = ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize);
if (lbRc)
{
ppReply->Data[0] = bAccepted;
}
break;
} //CECMD_NEWCMD
case CECMD_TABSCMD:
{
// 0: спрятать/показать табы, 1: перейти на следующую, 2: перейти на предыдущую, 3: commit switch
DEBUGSTRCMD(L"GUI recieved CECMD_TABSCMD\n");
_ASSERTE(nDataSize>=1);
DWORD nTabCmd = pIn->Data[0];
gpConEmu->TabCommand((ConEmuTabCommand)nTabCmd);
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(BYTE);
if (ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
{
lbRc = TRUE;
ppReply->Data[0] = TRUE;
}
break;
} // CECMD_TABSCMD
case CECMD_ATTACH2GUI:
{
// Получен запрос на Attach из сервера
MCHKHEAP;
CESERVER_REQ_SRVSTARTSTOPRET Ret = {};
lbRc = CVConGroup::AttachRequested(pIn->StartStop.hWnd, &(pIn->StartStop), Ret);
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_SRVSTARTSTOPRET)+(Ret.cchEnvCommands*sizeof(wchar_t));
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
{
SafeFree(Ret.pszCommands);
goto wrap;
}
if (lbRc)
{
_ASSERTE(sizeof(ppReply->SrvStartStopRet) == sizeof(Ret));
memmove(&ppReply->SrvStartStopRet, &Ret, sizeof(Ret));
// Environment strings (inherited from parent console)
if (Ret.cchEnvCommands && Ret.pszCommands)
{
memmove(ppReply->SrvStartStopRet.szCommands, Ret.pszCommands, Ret.cchEnvCommands*sizeof(wchar_t));
ppReply->SrvStartStopRet.cchEnvCommands = Ret.cchEnvCommands;
}
else
{
ppReply->SrvStartStopRet.cchEnvCommands = 0;
}
SafeFree(Ret.pszCommands);
_ASSERTE((ppReply->StartStopRet.nBufferHeight == 0) || ((int)ppReply->StartStopRet.nBufferHeight > (pIn->StartStop.sbi.srWindow.Bottom-pIn->StartStop.sbi.srWindow.Top)));
}
MCHKHEAP;
break;
} // CECMD_ATTACH2GUI
case CECMD_SRVSTARTSTOP:
{
MCHKHEAP;
// SRVSTART не приходит если запускается cmd под админом или из Win+G
bool lbAllocated = false;
if (pIn->SrvStartStop.Started == srv_Started)
{
// Запущен процесс сервера
HWND hConWnd = (HWND)pIn->dwData[1];
_ASSERTE(hConWnd && IsWindow(hConWnd));
DWORD nStartTick = timeGetTime();
struct MsgSrvStartedArg
{
HWND hConWnd;
DWORD nSrcPID;
DWORD dwKeybLayout;
DWORD timeStart;
DWORD timeRecv;
DWORD timeFin;
CESERVER_REQ_SRVSTARTSTOPRET Ret;
//111002 - вернуть должен HWND окна отрисовки (дочернее окно ConEmu)
static LRESULT OnSrvStarted(LPARAM lParam)
{
MsgSrvStartedArg *pArg = (MsgSrvStartedArg*)lParam;
HWND hWndDC = NULL;
DWORD nServerPID = pArg->nSrcPID;
HWND hWndCon = pArg->hConWnd;
DWORD dwKeybLayout = pArg->dwKeybLayout;
pArg->timeRecv = timeGetTime();
DWORD t1, t2; int iFound = -1;
hWndDC = CVConGroup::DoSrvCreated(nServerPID, hWndCon, dwKeybLayout, t1, t2, iFound, pArg->Ret);
UNREFERENCED_PARAMETER(dwKeybLayout);
UNREFERENCED_PARAMETER(hWndCon);
pArg->timeFin = timeGetTime();
if (hWndDC == NULL)
{
_ASSERTE(hWndDC!=NULL);
}
else
{
#ifdef _DEBUG
DWORD nRecvDur = pArg->timeRecv - pArg->timeStart;
DWORD nProcDur = pArg->timeFin - pArg->timeRecv;
#define MSGSTARTED_TIMEOUT 10000
if ((nRecvDur > MSGSTARTED_TIMEOUT) || (nProcDur > MSGSTARTED_TIMEOUT))
{
_ASSERTE((nRecvDur <= MSGSTARTED_TIMEOUT) && (nProcDur <= MSGSTARTED_TIMEOUT));
}
#endif
}
return (LRESULT)hWndDC;
};
} arg = {hConWnd, pIn->hdr.nSrcPID, pIn->SrvStartStop.dwKeybLayout, nStartTick};
gpConEmu->CallMainThread(true, arg.OnSrvStarted, (LPARAM)&arg);
HWND hWndDC = arg.Ret.Info.hWndDc;
HWND hWndBack = arg.Ret.Info.hWndBack;
_ASSERTE(hWndDC!=NULL);
#ifdef _DEBUG
DWORD dwErr = GetLastError(), nEndTick = timeGetTime(), nDelta = nEndTick - nStartTick;
if (hWndDC && nDelta >= EXECUTE_CMD_WARN_TIMEOUT)
{
if (!IsDebuggerPresent())
{
//_ASSERTE(nDelta <= EXECUTE_CMD_WARN_TIMEOUT || (pIn->hdr.nCmd == CECMD_CMDSTARTSTOP && nDelta <= EXECUTE_CMD_WARN_TIMEOUT2));
_ASSERTEX(nDelta <= EXECUTE_CMD_WARN_TIMEOUT);
}
}
#endif
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_SRVSTARTSTOPRET)+(arg.Ret.cchEnvCommands*sizeof(wchar_t));
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
{
SafeFree(arg.Ret.pszCommands);
goto wrap;
}
lbAllocated = true;
_ASSERTE(sizeof(ppReply->SrvStartStopRet) == sizeof(arg.Ret));
memmove(&ppReply->SrvStartStopRet, &arg.Ret, sizeof(arg.Ret));
// Environment strings (inherited from parent console)
if (arg.Ret.cchEnvCommands && arg.Ret.pszCommands)
{
memmove(ppReply->SrvStartStopRet.szCommands, arg.Ret.pszCommands, arg.Ret.cchEnvCommands*sizeof(wchar_t));
ppReply->SrvStartStopRet.cchEnvCommands = arg.Ret.cchEnvCommands;
}
else
{
ppReply->SrvStartStopRet.cchEnvCommands = 0;
}
SafeFree(arg.Ret.pszCommands);
}
else if (pIn->SrvStartStop.Started == srv_Stopped)
{
// Процесс сервера завершается
CRealConsole* pRCon = NULL;
CVConGuard VCon;
for (size_t i = 0;; i++)
{
if (!CVConGroup::GetVCon(i, &VCon))
break;
pRCon = VCon->RCon();
if (pRCon && (pRCon->GetServerPID(true) == pIn->hdr.nSrcPID || pRCon->GetServerPID(false) == pIn->hdr.nSrcPID))
{
break;
}
pRCon = NULL;
}
gpConEmu->mn_ShellExitCode = pIn->SrvStartStop.nShellExitCode;
if (pRCon)
pRCon->OnServerClosing(pIn->hdr.nSrcPID, &pIn->SrvStartStop.nShellExitCode);
//pIn->dwData[0] = 1;
}
else
{
_ASSERTE((pIn->dwData[0] == 1) || (pIn->dwData[0] == 101));
}
MCHKHEAP;
if (!lbAllocated)
{
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_SRVSTARTSTOPRET);
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
goto wrap;
}
lbRc = TRUE;
//// Отправляем
//fSuccess = WriteFile(
// hPipe, // handle to pipe
// pOut, // buffer to write from
// pOut->hdr.cbSize, // number of bytes to write
// &cbWritten, // number of bytes written
// NULL); // not overlapped I/O
//ExecuteFreeResult(pOut);
break;
} // CECMD_SRVSTARTSTOP
case CECMD_ASSERT:
{
DWORD nBtn = MessageBox(NULL, pIn->AssertInfo.szDebugInfo, pIn->AssertInfo.szTitle, pIn->AssertInfo.nBtns);
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(DWORD);
if (ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
{
lbRc = TRUE;
ppReply->dwData[0] = nBtn;
}
//ExecutePrepareCmd(&pIn->hdr, CECMD_ASSERT, sizeof(CESERVER_REQ_HDR) + sizeof(DWORD));
//pIn->dwData[0] = nBtn;
//// Отправляем
//fSuccess = WriteFile(
// hPipe, // handle to pipe
// pIn, // buffer to write from
// pIn->hdr.cbSize, // number of bytes to write
// &cbWritten, // number of bytes written
// NULL); // not overlapped I/O
break;
} // CECMD_ASSERT
case CECMD_ATTACHGUIAPP:
{
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_ATTACHGUIAPP);
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
goto wrap;
ppReply->AttachGuiApp = pIn->AttachGuiApp;
//CESERVER_REQ Out;
//ExecutePrepareCmd(&Out.hdr, CECMD_ATTACHGUIAPP, sizeof(CESERVER_REQ_HDR)+sizeof(Out.AttachGuiApp));
//Out.AttachGuiApp = pIn->AttachGuiApp;
#ifdef SHOW_GUIATTACH_START
if (pIn->AttachGuiApp.hWindow == NULL)
{
wchar_t szDbg[1024];
_wsprintf(szDbg, SKIPLEN(countof(szDbg)) L"AttachGuiApp requested from:\n%s\nPID=%u", pIn->AttachGuiApp.sAppFilePathName, pIn->AttachGuiApp.nPID);
//MBoxA(szDbg);
MessageBox(NULL, szDbg, L"ConEmu", MB_SYSTEMMODAL);
}
#endif
// Уведомить ожидающую вкладку
CRealConsole* pRCon = CVConGroup::AttachRequestedGui(pIn->AttachGuiApp.nServerPID, pIn->AttachGuiApp.sAppFilePathName, pIn->AttachGuiApp.nPID);
if (pRCon)
{
CVConGuard VCon(pRCon->VCon());
RECT rcPrev = ppReply->AttachGuiApp.rcWindow;
HWND hBack = pRCon->VCon()->GetBack();
//// Размер должен быть независим от возможности наличия прокрутки в VCon
//GetWindowRect(hBack, &ppReply->AttachGuiApp.rcWindow);
//ppReply->AttachGuiApp.rcWindow.right -= ppReply->AttachGuiApp.rcWindow.left;
//ppReply->AttachGuiApp.rcWindow.bottom -= ppReply->AttachGuiApp.rcWindow.top;
//ppReply->AttachGuiApp.rcWindow.left = ppReply->AttachGuiApp.rcWindow.top = 0;
////MapWindowPoints(NULL, hBack, (LPPOINT)&ppReply->AttachGuiApp.rcWindow, 2);
//pRCon->CorrectGuiChildRect(ppReply->AttachGuiApp.nStyle, ppReply->AttachGuiApp.nStyleEx, ppReply->AttachGuiApp.rcWindow);
// Уведомить RCon и ConEmuC, что гуй подцепился
// Вызывается два раза. Первый (при запуске exe) ahGuiWnd==NULL, второй - после фактического создания окна
pRCon->SetGuiMode(pIn->AttachGuiApp.nFlags, pIn->AttachGuiApp.hAppWindow, pIn->AttachGuiApp.Styles.nStyle, pIn->AttachGuiApp.Styles.nStyleEx, pIn->AttachGuiApp.sAppFilePathName, pIn->AttachGuiApp.nPID, pIn->hdr.nBits, rcPrev);
ppReply->AttachGuiApp.nFlags = agaf_Success | (pRCon->isActive(false) ? 0 : agaf_Inactive);
ppReply->AttachGuiApp.nServerPID = pRCon->GetServerPID();
ppReply->AttachGuiApp.nPID = ppReply->AttachGuiApp.nServerPID;
ppReply->AttachGuiApp.hConEmuDc = pRCon->GetView();
ppReply->AttachGuiApp.hConEmuBack = hBack;
ppReply->AttachGuiApp.hConEmuWnd = ghWnd;
ppReply->AttachGuiApp.hAppWindow = pIn->AttachGuiApp.hAppWindow;
ppReply->AttachGuiApp.hSrvConWnd = pRCon->ConWnd();
ppReply->AttachGuiApp.hkl = (DWORD)(LONG)(LONG_PTR)GetKeyboardLayout(gpConEmu->mn_MainThreadId);
ZeroStruct(ppReply->AttachGuiApp.Styles.Shifts);
CRealConsole::CorrectGuiChildRect(pIn->AttachGuiApp.Styles.nStyle, pIn->AttachGuiApp.Styles.nStyleEx, ppReply->AttachGuiApp.Styles.Shifts, pIn->AttachGuiApp.sAppFilePathName);
}
else
{
ppReply->AttachGuiApp.nFlags = agaf_Fail;
_ASSERTE(FALSE && "No one tab is waiting for ChildGui process");
}
lbRc = TRUE;
//// Отправляем
//fSuccess = WriteFile(
// hPipe, // handle to pipe
// &Out, // buffer to write from
// Out.hdr.cbSize, // number of bytes to write
// &cbWritten, // number of bytes written
// NULL); // not overlapped I/O
break;
} // CECMD_ATTACHGUIAPP
case CECMD_GUICLIENTSHIFT:
{
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(GuiStylesAndShifts);
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
goto wrap;
ppReply->GuiAppShifts = pIn->GuiAppShifts;
ZeroStruct(ppReply->GuiAppShifts.Shifts);
CRealConsole::CorrectGuiChildRect(pIn->GuiAppShifts.nStyle, pIn->GuiAppShifts.nStyleEx, ppReply->GuiAppShifts.Shifts, pIn->GuiAppShifts.szExeName);
lbRc = TRUE;
break;
} // CECMD_GUICLIENTSHIFT
case CECMD_GUIMACRO:
{
// Допустимо, если GuiMacro пытаются выполнить извне
CVConGuard VCon;
CVConGroup::GetActiveVCon(&VCon);
DWORD nFarPluginPID = VCon->RCon()->GetFarPID(true);
LPWSTR pszResult = ConEmuMacro::ExecuteMacro(pIn->GuiMacro.sMacro, VCon->RCon(), (nFarPluginPID==pIn->hdr.nSrcPID), &pIn->GuiMacro);
int nLen = pszResult ? _tcslen(pszResult) : 0;
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_GUIMACRO)+nLen*sizeof(wchar_t);
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
{
SafeFree(pszResult);
goto wrap;
}
if (pszResult)
{
lstrcpy(ppReply->GuiMacro.sMacro, pszResult);
ppReply->GuiMacro.nSucceeded = 1;
free(pszResult);
}
else
{
ppReply->GuiMacro.sMacro[0] = 0;
ppReply->GuiMacro.nSucceeded = 0;
}
lbRc = TRUE;
break;
} // CECMD_GUIMACRO
case CECMD_CMDSTARTSTOP:
{
CRealServer* pRSrv = NULL;
CVConGuard VCon;
DWORD nSrvPID = pIn->hdr.nSrcPID;
DWORD nMonitorTID = (pIn->DataSize() >= sizeof(pIn->StartStop)) ? pIn->StartStop.dwAID : 0;
if (CVConGroup::GetVConBySrvPID(nSrvPID, nMonitorTID, &VCon))
pRSrv = &VCon->RCon()->m_RConServer;
if (pRSrv)
{
CESERVER_REQ* pOut = pRSrv->cmdStartStop(pInst, pIn, pIn->DataSize());
if (pOut)
{
DWORD nDataSize = pOut->DataSize();
pcbReplySize = pOut->hdr.cbSize;
if (ExecuteNewCmd(ppReply, pcbMaxReplySize, pOut->hdr.nCmd, pcbReplySize))
{
if (nDataSize > 0)
{
memmove(ppReply->Data, pOut->Data, nDataSize);
}
lbRc = TRUE;
}
ExecuteFreeResult(pOut);
}
}
break;
} // CECMD_CMDSTARTSTOP
//case CECMD_DEFTERMSTARTED:
//{
// if (gpConEmu->mp_DefTrm)
// gpConEmu->mp_DefTrm->OnDefTermStarted(pIn);
// pcbReplySize = sizeof(CESERVER_REQ_HDR);
// if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
// goto wrap;
// lbRc = TRUE;
// break;
//} // CECMD_DEFTERMSTARTED
default:
_ASSERTE(FALSE && "Command was not handled in CGuiServer::GuiServerCommand");
}
//// Освободить память
//if (pIn && (LPVOID)pIn != (LPVOID)&in)
//{
// free(pIn); pIn = NULL;
//}
wrap:
return lbRc;
}
//Arguments:
// hConWnd - Хэндл КОНСОЛЬНОГО окна (по нему формируется имя пайпа для GUI)
// pIn - выполняемая команда
// nTimeout- таймаут подключения
//Returns:
// CESERVER_REQ. Его необходимо освободить через free(...);
//WARNING!!!
// Эта процедура не может получить с сервера более 600 байт данных!
// В заголовке hOwner в дебаге может быть отображена ошибка
CESERVER_REQ* ExecuteCmd(const wchar_t* szPipeName, CESERVER_REQ* pIn, DWORD nWaitPipe, HWND hOwner, BOOL bAsyncNoResult, DWORD nServerPID, BOOL bIgnoreAbsence /*= FALSE*/)
{
CESERVER_REQ* pOut = NULL;
HANDLE hPipe = NULL;
BYTE cbReadBuf[600]; // чтобы CESERVER_REQ_OUTPUTFILE поместился
wchar_t szErr[MAX_PATH*2]; szErr[0] = 0;
BOOL fSuccess = FALSE;
DWORD cbRead = 0, /*dwMode = 0,*/ dwErr = 0;
int nAllSize;
LPBYTE ptrData;
#ifdef _DEBUG
bool bIsAltSrvCmd;
wchar_t szDbgPrefix[64], szDbgResult[64], *pszDbgMsg = NULL;
#endif
if (!pIn || !szPipeName)
{
_ASSERTE(pIn && szPipeName);
pOut = NULL;
goto wrap;
}
#ifdef _DEBUG
_wsprintf(szDbgPrefix, SKIPLEN(countof(szDbgPrefix)) L">> ExecCmd: PID=%5u TID=%5u Cmd=%3u ", GetCurrentProcessId(), GetCurrentThreadId(), pIn->hdr.nCmd);
pszDbgMsg = lstrmerge(szDbgPrefix, szPipeName, L"\n");
if (pszDbgMsg) { DEBUGSTRCMD(pszDbgMsg); free(pszDbgMsg); }
#endif
pIn->hdr.bAsync = bAsyncNoResult;
_ASSERTE(pIn->hdr.nSrcPID && pIn->hdr.nSrcThreadId);
_ASSERTE(pIn->hdr.cbSize >= sizeof(pIn->hdr));
hPipe = ExecuteOpenPipe(szPipeName, szErr, NULL/*Сюда хорошо бы имя модуля подкрутить*/, nServerPID, nWaitPipe, FALSE, NULL, bIgnoreAbsence);
if (hPipe == NULL || hPipe == INVALID_HANDLE_VALUE)
{
#ifdef _DEBUG
dwErr = GetLastError();
// в заголовке "чисто" запущенного фара появляются отладочные(?) сообщения
// по идее - не должны, т.к. все должно быть через мэппинг
// *** _ASSERTEX(hPipe != NULL && hPipe != INVALID_HANDLE_VALUE); - no need in assert, it was already shown
#ifdef CONEMU_MINIMAL
SetConsoleTitle(szErr);
#else
if (hOwner)
{
if (hOwner == myGetConsoleWindow())
SetConsoleTitle(szErr);
else
SetWindowText(hOwner, szErr);
}
#endif
#endif
pOut = NULL;
goto wrap;
}
#ifdef _DEBUG
bIsAltSrvCmd = (pIn->hdr.nCmd==CECMD_ALTBUFFER || pIn->hdr.nCmd==CECMD_ALTBUFFERSTATE || pIn->hdr.nCmd==CECMD_SETCONSCRBUF || pIn->hdr.nCmd == CECMD_LOCKSTATION || pIn->hdr.nCmd == CECMD_UNLOCKSTATION);
_ASSERTE(pIn->hdr.nSrcThreadId==GetCurrentThreadId() || (bIsAltSrvCmd && pIn->hdr.nSrcPID!=GetCurrentProcessId()));
#endif
if (bAsyncNoResult)
{
// Если нас не интересует возврат и нужно сразу вернуться
fSuccess = WriteFile(hPipe, pIn, pIn->hdr.cbSize, &cbRead, NULL);
#ifdef _DEBUG
dwErr = GetLastError();
_ASSERTE(fSuccess && (cbRead == pIn->hdr.cbSize));
#endif
// -- Do not close hPipe, otherwise the reader may fail with that packet
// -- with error ‘pipe was closed before end’.
// -- Handle leak, yeah, however this is rarely used op.
// -- Must be refactored, but not so critical...
// -- CloseHandle(hPipe);
pOut = NULL;
goto wrap;
}
else
{
WARNING("При Overlapped часто виснет в этом месте.");
// Send a message to the pipe server and read the response.
fSuccess = TransactNamedPipe(
hPipe, // pipe handle
(LPVOID)pIn, // message to server
pIn->hdr.cbSize, // message length
cbReadBuf, // buffer to receive reply
sizeof(cbReadBuf), // size of read buffer
&cbRead, // bytes read
NULL); // not overlapped
dwErr = GetLastError();
//CloseHandle(hPipe);
if (!fSuccess && (dwErr != ERROR_MORE_DATA))
{
//_ASSERTE(fSuccess || (dwErr == ERROR_MORE_DATA));
CloseHandle(hPipe);
pOut = NULL;
goto wrap;
}
}
if (cbRead < sizeof(CESERVER_REQ_HDR))
{
CloseHandle(hPipe);
pOut = NULL;
goto wrap;
}
pOut = (CESERVER_REQ*)cbReadBuf; // temporary
if (pOut->hdr.cbSize < cbRead)
{
CloseHandle(hPipe);
if (pOut->hdr.cbSize)
{
_ASSERTE(pOut->hdr.cbSize == 0 || pOut->hdr.cbSize >= cbRead);
DEBUGSTR(L"!!! Wrong nSize received from GUI server !!!\n");
}
pOut = NULL;
goto wrap;
}
if (pOut->hdr.nVersion != CESERVER_REQ_VER)
{
CloseHandle(hPipe);
DEBUGSTR(L"!!! Wrong nVersion received from GUI server !!!\n");
pOut = NULL;
goto wrap;
}
nAllSize = pOut->hdr.cbSize;
pOut = (CESERVER_REQ*)malloc(nAllSize);
_ASSERTE(pOut);
if (!pOut)
{
CloseHandle(hPipe);
_ASSERTE(pOut == NULL);
goto wrap;
}
memmove(pOut, cbReadBuf, cbRead);
ptrData = ((LPBYTE)pOut)+cbRead;
nAllSize -= cbRead;
while (nAllSize>0)
{
// Break if TransactNamedPipe or ReadFile is successful
if (fSuccess)
break;
// Read from the pipe if there is more data in the message.
fSuccess = ReadFile(
hPipe, // pipe handle
ptrData, // buffer to receive reply
nAllSize, // size of buffer
&cbRead, // number of bytes read
NULL); // not overlapped
// Exit if an error other than ERROR_MORE_DATA occurs.
if (!fSuccess && ((dwErr = GetLastError()) != ERROR_MORE_DATA))
break;
ptrData += cbRead;
nAllSize -= cbRead;
}
CloseHandle(hPipe);
if (pOut && (pOut->hdr.nCmd != pIn->hdr.nCmd))
{
_ASSERTE(pOut->hdr.nCmd == pIn->hdr.nCmd);
if (pOut->hdr.nCmd == 0)
{
ExecuteFreeResult(pOut);
pOut = NULL;
}
}
wrap:
#ifdef _DEBUG
if (pOut)
_wsprintf(szDbgResult, SKIPLEN(countof(szDbgResult)) L"- Data=%5u Err=%u\n", pOut->DataSize(), dwErr);
else
lstrcpyn(szDbgResult, L"[NULL]\n", countof(szDbgResult));
pszDbgMsg = lstrmerge(szDbgPrefix, szDbgResult);
if (pszDbgMsg) { DEBUGSTRCMD(pszDbgMsg); free(pszDbgMsg); }
#endif
return pOut;
}
//// Эта функция пайп не закрывает!
//void CGuiServer::GuiServerThreadCommand(HANDLE hPipe)
BOOL CGuiServer::GuiServerCommand(LPVOID pInst, CESERVER_REQ* pIn, CESERVER_REQ* &ppReply, DWORD &pcbReplySize, DWORD &pcbMaxReplySize, LPARAM lParam)
{
BOOL lbRc = FALSE;
CGuiServer* pGSrv = (CGuiServer*)lParam;
if (!pGSrv)
{
_ASSERTE(((CGuiServer*)lParam)!=NULL);
pGSrv = &gpConEmu->m_GuiServer;
}
if (pIn->hdr.bAsync)
pGSrv->mp_GuiServer->BreakConnection(pInst);
gpSetCls->debugLogCommand(pIn, TRUE, timeGetTime(), 0, pGSrv ? pGSrv->ms_ServerPipe : NULL);
#ifdef _DEBUG
UINT nDataSize = pIn->hdr.cbSize - sizeof(CESERVER_REQ_HDR);
#endif
// Все данные из пайпа получены, обрабатываем команду и возвращаем (если нужно) результат
#ifdef ALLOW_WINE_MSG
if (gbIsWine)
{
wchar_t szMsg[128];
msprintf(szMsg, countof(szMsg), L"CGuiServer::GuiServerCommand.\nGUI TID=%u\nSrcPID=%u, SrcTID=%u, Cmd=%u",
GetCurrentThreadId(), pIn->hdr.nSrcPID, pIn->hdr.nSrcThreadId, pIn->hdr.nCmd);
MessageBox(szMsg, MB_ICONINFORMATION);
}
#endif
switch (pIn->hdr.nCmd)
{
case CECMD_NEWCMD:
{
// Приходит из другой копии ConEmu.exe, когда она запущена с ключом /single, /showhide, /showhideTSA
DEBUGSTRCMD(L"GUI recieved CECMD_NEWCMD\n");
if (pIn->NewCmd.isAdvLogging && !gpSetCls->isAdvLogging)
{
gpSetCls->isAdvLogging = pIn->NewCmd.isAdvLogging;
gpConEmu->CreateLog();
}
if (gpSetCls->isAdvLogging && (pIn->NewCmd.isAdvLogging > gpSetCls->isAdvLogging))
{
wchar_t szLogLevel[80];
_wsprintf(szLogLevel, SKIPLEN(countof(szLogLevel)) L"Changing log level! Old=%u, New=%u", (UINT)gpSetCls->isAdvLogging, (UINT)pIn->NewCmd.isAdvLogging);
gpConEmu->LogString(szLogLevel);
gpSetCls->isAdvLogging = pIn->NewCmd.isAdvLogging;
}
if (gpSetCls->isAdvLogging)
{
size_t cchAll = 120 + _tcslen(pIn->NewCmd.szConEmu) + _tcslen(pIn->NewCmd.szCurDir) + _tcslen(pIn->NewCmd.szCommand);
wchar_t* pszInfo = (wchar_t*)malloc(cchAll*sizeof(*pszInfo));
if (pszInfo)
{
_wsprintf(pszInfo, SKIPLEN(cchAll) L"CECMD_NEWCMD: Wnd=x%08X, Act=%u, ConEmu=%s, Dir=%s, Cmd=%s",
(DWORD)(DWORD_PTR)pIn->NewCmd.hFromConWnd, pIn->NewCmd.ShowHide,
pIn->NewCmd.szConEmu, pIn->NewCmd.szCurDir, pIn->NewCmd.szCommand);
gpConEmu->LogString(pszInfo);
free(pszInfo);
}
}
BOOL bAccepted = FALSE;
if (pIn->NewCmd.szConEmu[0])
{
bAccepted = (lstrcmpi(gpConEmu->ms_ConEmuExeDir, pIn->NewCmd.szConEmu) == 0);
}
else
{
bAccepted = TRUE;
}
if (bAccepted)
{
bool bCreateTab = (pIn->NewCmd.ShowHide == sih_None || pIn->NewCmd.ShowHide == sih_StartDetached)
// Issue 1275: When minimized into TSA (on all VCon are closed) we need to restore and run new tab
|| (pIn->NewCmd.szCommand[0] && !CVConGroup::isVConExists(0));
gpConEmu->DoMinimizeRestore(bCreateTab ? sih_SetForeground : pIn->NewCmd.ShowHide);
// Может быть пусто
if (bCreateTab && pIn->NewCmd.szCommand[0])
{
RConStartArgs *pArgs = new RConStartArgs;
pArgs->Detached = (pIn->NewCmd.ShowHide == sih_StartDetached) ? crb_On : crb_Off;
pArgs->pszSpecialCmd = lstrdup(pIn->NewCmd.szCommand);
if (pIn->NewCmd.szCurDir[0] == 0)
{
_ASSERTE(pIn->NewCmd.szCurDir[0] != 0);
}
else
{
pArgs->pszStartupDir = lstrdup(pIn->NewCmd.szCurDir);
}
if (gpSetCls->IsMulti() || CVConGroup::isDetached())
{
gpConEmu->PostCreateCon(pArgs);
}
else
{
// Если хотят в одном окне - только одну консоль
gpConEmu->CreateWnd(pArgs);
SafeDelete(pArgs);
}
}
else
{
_ASSERTE(pIn->NewCmd.ShowHide==sih_ShowMinimize || pIn->NewCmd.ShowHide==sih_ShowHideTSA || pIn->NewCmd.ShowHide==sih_Show);
}
}
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(BYTE);
lbRc = ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize);
if (lbRc)
{
ppReply->Data[0] = bAccepted;
}
break;
} //CECMD_NEWCMD
case CECMD_TABSCMD:
{
// 0: спрятать/показать табы, 1: перейти на следующую, 2: перейти на предыдущую, 3: commit switch
DEBUGSTRCMD(L"GUI recieved CECMD_TABSCMD\n");
_ASSERTE(nDataSize>=1);
DWORD nTabCmd = pIn->Data[0];
gpConEmu->TabCommand((ConEmuTabCommand)nTabCmd);
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(BYTE);
if (ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
{
lbRc = TRUE;
ppReply->Data[0] = TRUE;
}
break;
} // CECMD_TABSCMD
#if 0
case CECMD_GETALLTABS:
{
int nConCount = gpConEmu->GetConCount();
int nActiveCon = gpConEmu->ActiveConNum();
size_t cchMax = nConCount*16;
size_t cchCount = 0;
CVirtualConsole* pVCon;
CESERVER_REQ_GETALLTABS::TabInfo* pTabs = (CESERVER_REQ_GETALLTABS::TabInfo*)calloc(cchMax, sizeof(*pTabs));
for (int V = 0; (pVCon = gpConEmu->GetVCon(V)) != NULL; V++)
{
if (!pTabs)
{
_ASSERTE(pTabs!=NULL);
break;
}
CRealConsole* pRCon = pVCon->RCon();
if (!pRCon)
continue;
ConEmuTab tab;
wchar_t szModified[4];
for (int T = 0; pRCon->GetTab(T, &tab); T++)
{
if (cchCount >= cchMax)
{
pTabs = (CESERVER_REQ_GETALLTABS::TabInfo*)realloc(pTabs, (cchMax+32)*sizeof(*pTabs));
if (!pTabs)
{
_ASSERTE(pTabs!=NULL);
break;
}
cchMax += 32;
_ASSERTE(cchCount<cchMax);
}
pTabs[cchCount].ActiveConsole == (V == nActiveCon);
pTabs[cchCount].ActiveTab == (tab.Current != 0);
pTabs[cchCount].Disabled = ((tab.Type & fwt_Disabled) == fwt_Disabled);
pTabs[cchCount].ConsoleIdx = V;
pTabs[cchCount].TabIdx = T;
// Text
wcscpy_c(szModified, tab.Modified ? L" * " : L" ");
if (V == nActiveCon)
{
if (T < 9)
_wsprintf(pTabs[cchCount].Title, SKIPLEN(countof(pTabs[cchCount].Title)) L"[%i/&%i]%s", V+1, T+1, szModified);
else if (T == 9)
_wsprintf(pTabs[cchCount].Title, SKIPLEN(countof(pTabs[cchCount].Title)) L"[%i/1&0]%s", V+1, szModified);
else
_wsprintf(pTabs[cchCount].Title, SKIPLEN(countof(pTabs[cchCount].Title)) L"[%i/%i]%s", V+1, T+1, szModified);
}
else
{
_wsprintf(pTabs[cchCount].Title, SKIPLEN(countof(pTabs[cchCount].Title)) L"[%i/%i]%s", V+1, T+1, szModified);
}
cchCount++;
}
}
if (cchCount && pTabs)
{
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_GETALLTABS)+((cchCount-1)*sizeof(CESERVER_REQ_GETALLTABS::TabInfo));
if (ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
{
lbRc = TRUE;
ppReply->GetAllTabs.Count = cchCount;
memmove(ppReply->GetAllTabs.Tabs, pTabs, cchCount*sizeof(*pTabs));
}
}
SafeFree(pTabs);
break;
} // CECMD_GETALLTABS
case CECMD_ACTIVATETAB:
{
BOOL lbTabOk = FALSE;
CVirtualConsole *pVCon = gpConEmu->GetVCon(pIn->dwData[0]);
if (pVCon && pVCon->RCon())
{
lbTabOk = pVCon->RCon()->ActivateFarWindow(pIn->dwData[1]);
}
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(DWORD);
if (ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
{
lbRc = TRUE;
ppReply->dwData[0] = lbTabOk;
}
break;
} // CECMD_ACTIVATETAB
#endif
case CECMD_ATTACH2GUI:
{
MCHKHEAP;
// Получен запрос на Attach из сервера
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_SRVSTARTSTOPRET);
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
goto wrap;
//CESERVER_REQ* pOut = ExecuteNewCmd(CECMD_ATTACH2GUI, sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_STARTSTOPRET));
CVConGroup::AttachRequested(pIn->StartStop.hWnd, &(pIn->StartStop), &(ppReply->SrvStartStopRet));
_ASSERTE((ppReply->StartStopRet.nBufferHeight == 0) || ((int)ppReply->StartStopRet.nBufferHeight > (pIn->StartStop.sbi.srWindow.Bottom-pIn->StartStop.sbi.srWindow.Top)));
MCHKHEAP;
lbRc = TRUE;
//ExecuteFreeResult(pOut);
break;
} // CECMD_ATTACH2GUI
case CECMD_SRVSTARTSTOP:
{
MCHKHEAP;
// SRVSTART не приходит если запускается cmd под админом
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_SRVSTARTSTOPRET);
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
goto wrap;
if (pIn->SrvStartStop.Started == srv_Started)
{
// Запущен процесс сервера
HWND hConWnd = (HWND)pIn->dwData[1];
_ASSERTE(hConWnd && IsWindow(hConWnd));
DWORD nStartTick = timeGetTime();
//LRESULT l = 0;
//DWORD_PTR dwRc = 0;
//2010-05-21 Поскольку это критично - лучше ждать до упора, хотя может быть DeadLock?
//l = SendMessageTimeout(ghWnd, gpConEmu->mn_MsgSrvStarted, (WPARAM)hConWnd, pIn->hdr.nSrcPID,
// SMTO_BLOCK, 5000, &dwRc);
//111002 - вернуть должен HWND окна отрисовки (дочернее окно ConEmu)
MsgSrvStartedArg arg = {hConWnd, pIn->hdr.nSrcPID, pIn->SrvStartStop.dwKeybLayout, nStartTick};
SendMessage(ghWnd, gpConEmu->mn_MsgSrvStarted, 0, (LPARAM)&arg);
HWND hWndDC = arg.hWndDc;
HWND hWndBack = arg.hWndBack;
_ASSERTE(hWndDC!=NULL);
#ifdef _DEBUG
DWORD dwErr = GetLastError(), nEndTick = timeGetTime(), nDelta = nEndTick - nStartTick;
if (hWndDC && nDelta >= EXECUTE_CMD_WARN_TIMEOUT)
{
if (!IsDebuggerPresent())
{
//_ASSERTE(nDelta <= EXECUTE_CMD_WARN_TIMEOUT || (pIn->hdr.nCmd == CECMD_CMDSTARTSTOP && nDelta <= EXECUTE_CMD_WARN_TIMEOUT2));
_ASSERTEX(nDelta <= EXECUTE_CMD_WARN_TIMEOUT);
}
}
#endif
//pIn->dwData[0] = (DWORD)ghWnd; //-V205
//pIn->dwData[1] = (DWORD)dwRc; //-V205
//pIn->dwData[0] = (l == 0) ? 0 : 1;
ppReply->SrvStartStopRet.Info.hWnd = ghWnd;
ppReply->SrvStartStopRet.Info.hWndDc = hWndDC;
ppReply->SrvStartStopRet.Info.hWndBack = hWndBack;
ppReply->SrvStartStopRet.Info.dwPID = GetCurrentProcessId();
// Limited logging of console contents (same output as processed by CECF_ProcessAnsi)
gpConEmu->GetAnsiLogInfo(ppReply->SrvStartStopRet.AnsiLog);
// Return GUI info, let it be in one place
gpConEmu->GetGuiInfo(ppReply->SrvStartStopRet.GuiMapping);
}
else if (pIn->SrvStartStop.Started == srv_Stopped)
{
// Процесс сервера завершается
CRealConsole* pRCon = NULL;
CVConGuard VCon;
for (size_t i = 0;; i++)
{
if (!CVConGroup::GetVCon(i, &VCon))
break;
pRCon = VCon->RCon();
if (pRCon && (pRCon->GetServerPID(true) == pIn->hdr.nSrcPID || pRCon->GetServerPID(false) == pIn->hdr.nSrcPID))
{
break;
}
pRCon = NULL;
}
if (pRCon)
pRCon->OnServerClosing(pIn->hdr.nSrcPID);
//pIn->dwData[0] = 1;
}
else
{
_ASSERTE((pIn->dwData[0] == 1) || (pIn->dwData[0] == 101));
}
MCHKHEAP;
lbRc = TRUE;
//// Отправляем
//fSuccess = WriteFile(
// hPipe, // handle to pipe
// pOut, // buffer to write from
// pOut->hdr.cbSize, // number of bytes to write
// &cbWritten, // number of bytes written
// NULL); // not overlapped I/O
//ExecuteFreeResult(pOut);
break;
} // CECMD_SRVSTARTSTOP
case CECMD_ASSERT:
{
DWORD nBtn = MessageBox(NULL, pIn->AssertInfo.szDebugInfo, pIn->AssertInfo.szTitle, pIn->AssertInfo.nBtns);
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(DWORD);
if (ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
{
lbRc = TRUE;
ppReply->dwData[0] = nBtn;
}
//ExecutePrepareCmd(&pIn->hdr, CECMD_ASSERT, sizeof(CESERVER_REQ_HDR) + sizeof(DWORD));
//pIn->dwData[0] = nBtn;
//// Отправляем
//fSuccess = WriteFile(
// hPipe, // handle to pipe
// pIn, // buffer to write from
// pIn->hdr.cbSize, // number of bytes to write
// &cbWritten, // number of bytes written
// NULL); // not overlapped I/O
break;
} // CECMD_ASSERT
case CECMD_ATTACHGUIAPP:
{
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_ATTACHGUIAPP);
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
goto wrap;
ppReply->AttachGuiApp = pIn->AttachGuiApp;
//CESERVER_REQ Out;
//ExecutePrepareCmd(&Out.hdr, CECMD_ATTACHGUIAPP, sizeof(CESERVER_REQ_HDR)+sizeof(Out.AttachGuiApp));
//Out.AttachGuiApp = pIn->AttachGuiApp;
#ifdef SHOW_GUIATTACH_START
if (pIn->AttachGuiApp.hWindow == NULL)
{
wchar_t szDbg[1024];
_wsprintf(szDbg, SKIPLEN(countof(szDbg)) L"AttachGuiApp requested from:\n%s\nPID=%u", pIn->AttachGuiApp.sAppFilePathName, pIn->AttachGuiApp.nPID);
//MBoxA(szDbg);
MessageBox(NULL, szDbg, L"ConEmu", MB_SYSTEMMODAL);
}
#endif
// Уведомить ожидающую вкладку
CRealConsole* pRCon = gpConEmu->AttachRequestedGui(pIn->AttachGuiApp.nServerPID, pIn->AttachGuiApp.sAppFilePathName, pIn->AttachGuiApp.nPID);
if (pRCon)
{
CVConGuard VCon(pRCon->VCon());
RECT rcPrev = ppReply->AttachGuiApp.rcWindow;
HWND hBack = pRCon->VCon()->GetBack();
//// Размер должен быть независим от возможности наличия прокрутки в VCon
//GetWindowRect(hBack, &ppReply->AttachGuiApp.rcWindow);
//ppReply->AttachGuiApp.rcWindow.right -= ppReply->AttachGuiApp.rcWindow.left;
//ppReply->AttachGuiApp.rcWindow.bottom -= ppReply->AttachGuiApp.rcWindow.top;
//ppReply->AttachGuiApp.rcWindow.left = ppReply->AttachGuiApp.rcWindow.top = 0;
////MapWindowPoints(NULL, hBack, (LPPOINT)&ppReply->AttachGuiApp.rcWindow, 2);
//pRCon->CorrectGuiChildRect(ppReply->AttachGuiApp.nStyle, ppReply->AttachGuiApp.nStyleEx, ppReply->AttachGuiApp.rcWindow);
// Уведомить RCon и ConEmuC, что гуй подцепился
// Вызывается два раза. Первый (при запуске exe) ahGuiWnd==NULL, второй - после фактического создания окна
pRCon->SetGuiMode(pIn->AttachGuiApp.nFlags, pIn->AttachGuiApp.hAppWindow, pIn->AttachGuiApp.Styles.nStyle, pIn->AttachGuiApp.Styles.nStyleEx, pIn->AttachGuiApp.sAppFilePathName, pIn->AttachGuiApp.nPID, pIn->hdr.nBits, rcPrev);
ppReply->AttachGuiApp.nFlags = agaf_Success | (pRCon->isActive(false) ? 0 : agaf_Inactive);
ppReply->AttachGuiApp.nServerPID = pRCon->GetServerPID();
ppReply->AttachGuiApp.nPID = ppReply->AttachGuiApp.nServerPID;
ppReply->AttachGuiApp.hConEmuDc = pRCon->GetView();
ppReply->AttachGuiApp.hConEmuBack = hBack;
ppReply->AttachGuiApp.hConEmuWnd = ghWnd;
ppReply->AttachGuiApp.hAppWindow = pIn->AttachGuiApp.hAppWindow;
ppReply->AttachGuiApp.hSrvConWnd = pRCon->ConWnd();
ppReply->AttachGuiApp.hkl = (DWORD)(LONG)(LONG_PTR)GetKeyboardLayout(gpConEmu->mn_MainThreadId);
ZeroStruct(ppReply->AttachGuiApp.Styles.Shifts);
CRealConsole::CorrectGuiChildRect(pIn->AttachGuiApp.Styles.nStyle, pIn->AttachGuiApp.Styles.nStyleEx, ppReply->AttachGuiApp.Styles.Shifts, pIn->AttachGuiApp.sAppFilePathName);
}
else
{
ppReply->AttachGuiApp.nFlags = agaf_Fail;
_ASSERTE(FALSE && "No one tab is waiting for ChildGui process");
}
lbRc = TRUE;
//// Отправляем
//fSuccess = WriteFile(
// hPipe, // handle to pipe
// &Out, // buffer to write from
// Out.hdr.cbSize, // number of bytes to write
// &cbWritten, // number of bytes written
// NULL); // not overlapped I/O
break;
} // CECMD_ATTACHGUIAPP
case CECMD_GUICLIENTSHIFT:
{
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(GuiStylesAndShifts);
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
goto wrap;
ppReply->GuiAppShifts = pIn->GuiAppShifts;
ZeroStruct(ppReply->GuiAppShifts.Shifts);
CRealConsole::CorrectGuiChildRect(pIn->GuiAppShifts.nStyle, pIn->GuiAppShifts.nStyleEx, ppReply->GuiAppShifts.Shifts, pIn->GuiAppShifts.szExeName);
lbRc = TRUE;
break;
} // CECMD_GUICLIENTSHIFT
case CECMD_GUIMACRO:
{
// Допустимо, если GuiMacro пытаются выполнить извне
CVConGuard VCon; CVConGroup::GetActiveVCon(&VCon);
DWORD nFarPluginPID = VCon->RCon()->GetFarPID(true);
LPWSTR pszResult = ConEmuMacro::ExecuteMacro(pIn->GuiMacro.sMacro, VCon->RCon(), (nFarPluginPID==pIn->hdr.nSrcPID));
int nLen = pszResult ? _tcslen(pszResult) : 0;
pcbReplySize = sizeof(CESERVER_REQ_HDR)+sizeof(CESERVER_REQ_GUIMACRO)+nLen*sizeof(wchar_t);
if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
goto wrap;
if (pszResult)
{
lstrcpy(ppReply->GuiMacro.sMacro, pszResult);
ppReply->GuiMacro.nSucceeded = 1;
free(pszResult);
}
else
{
ppReply->GuiMacro.sMacro[0] = 0;
ppReply->GuiMacro.nSucceeded = 0;
}
lbRc = TRUE;
break;
} // CECMD_GUIMACRO
case CECMD_CMDSTARTSTOP:
{
CRealServer* pRSrv = NULL;
CVConGuard VCon;
if (CVConGroup::GetVConBySrvPID(pIn->hdr.nSrcPID, &VCon))
pRSrv = &VCon->RCon()->m_RConServer;
if (pRSrv)
{
CESERVER_REQ* pOut = pRSrv->cmdStartStop(pInst, pIn, pIn->DataSize());
if (pOut)
{
DWORD nDataSize = pOut->DataSize();
pcbReplySize = pOut->hdr.cbSize;
if (ExecuteNewCmd(ppReply, pcbMaxReplySize, pOut->hdr.nCmd, pcbReplySize))
{
if (nDataSize > 0)
{
memmove(ppReply->Data, pOut->Data, nDataSize);
}
lbRc = TRUE;
}
ExecuteFreeResult(pOut);
}
}
break;
} // CECMD_CMDSTARTSTOP
//case CECMD_DEFTERMSTARTED:
//{
// if (gpConEmu->mp_DefTrm)
// gpConEmu->mp_DefTrm->OnDefTermStarted(pIn);
// pcbReplySize = sizeof(CESERVER_REQ_HDR);
// if (!ExecuteNewCmd(ppReply, pcbMaxReplySize, pIn->hdr.nCmd, pcbReplySize))
// goto wrap;
// lbRc = TRUE;
// break;
//} // CECMD_DEFTERMSTARTED
default:
_ASSERTE(FALSE && "Command was not handled in CGuiServer::GuiServerCommand");
}
//// Освободить память
//if (pIn && (LPVOID)pIn != (LPVOID)&in)
//{
// free(pIn); pIn = NULL;
//}
wrap:
return lbRc;
}
