/**
* \brief Start-Funktion der Testumgebung
*
* Diese Funktion wird einmal beim Starten der Testumgebung
* aufgerufen. Hier sollte alles reingeschrieben werden,
* was für die initialisierung der einzelnen Tests nötig ist.
*/
TEFUNC void initialize(int /*argc*/, char** /*argv*/) {
// ------- Ein Paar Ausgaben, um die Funktionsweise vom Logging zu zeigen. -----//
SimonState::exemplar()->errors <<"Simon: Dies ist eine Fehler-Meldung!!!!" << SimonState::endm;
SimonState::exemplar()->errors <<"Simon: Dies ist eine weitere Fehler-Meldung!!!!" << SimonState::endm;
SimonState::exemplar()->errors <<"Simon: Dies ist eine weitere Fehler-Meldung2!!!!" << SimonState::endm;
SimonState::exemplar()->errors <<"Simon: Dies ist eine weitere Fehler-Meldung3!!!!" << SimonState::endm;
SimonState::exemplar()->errors <<"Simon: Dies ist eine weitere Fehler-Meldung4!!!!" << SimonState::endm;
SimonState::exemplar()->messages <<"Simon: Dies ist eine normale Message!!!!" << SimonState::endm;
SimonState::exemplar()->messages <<"Simon: Dies ist eine witer ueberfluessige Meldung!!!!" << SimonState::endm;
SimonState::exemplar()->messages <<"Collision: Hier spricht das Kollisionssystem!!!" << SimonState::endm;
// ---------------- Ende der Log-Tests -----------------//
// use low gravity for testing
//Vector3<float> gravity(0.0, -0.00089, 0.0);
//SimonState::exemplar()->setGravityVector(gravity);
Id planeId(Id::typePlane, 0);
// erzeuge einen Festkörper für die Ebene
SmartPointer<RigidBody> body = bodySystem.create(planeId);
// die Ebene sollte nicht vom Integrator behandelt werden.
body->setIsDynamicFlag(false);
// etwas drehen, damit die Ebene richtig ausgerichtet ist
body->setOrientation(Quaternion(0, Vector3<float>(1,0,0)));
body->setPosition(Vector3<float>(0.0,-200.0,0.0));
// erzeuge eine Ebene, mit dem oben defineriten Festkörper
SmartPointer<Geometry> plane = geometrySystem.createPlane(body);
Id sphereId1(Id::typeSphere, 0);
Id sphereId2(Id::typeSphere, 1);
Id sphereId3(Id::typeSphere, 2);
Id sphereId4(Id::typeSphere, 3);
Id sphereId5(Id::typeSphere, 4);
Id sphereId6(Id::typeSphere, 5);
Id sphereId7(Id::typeSphere, 6);
Id sphereId8(Id::typeSphere, 7);
Id sphereId9(Id::typeSphere, 8);
RigidBodyPtr sphb1 = bodySystem.create(sphereId1);
RigidBodyPtr sphb2 = bodySystem.create(sphereId2);
RigidBodyPtr sphb3 = bodySystem.create(sphereId3);
RigidBodyPtr sphb4 = bodySystem.create(sphereId4);
RigidBodyPtr sphb5 = bodySystem.create(sphereId5);
//Kontrollkugeln
RigidBodyPtr sphb6 = bodySystem.create(sphereId6);
RigidBodyPtr sphb7 = bodySystem.create(sphereId7);
//Fallende Kugeln
RigidBodyPtr sphb8 = bodySystem.create(sphereId8);
RigidBodyPtr sphb9 = bodySystem.create(sphereId9);
sphb1->setMass(10000.0);
sphb2->setMass(100.0);
sphb3->setMass(100.0);
sphb4->setMass(100.0);
sphb5->setMass(100.0);
sphb6->setMass(100.0);
sphb7->setMass(100.0);
sphb8->setMass(100.0);
sphb9->setMass(100.0);
SmartPointer<Geometry> sph1 = geometrySystem.createSphere(sphb1, 50);
SmartPointer<Geometry> sph2 = geometrySystem.createSphere(sphb2, 30);
SmartPointer<Geometry> sph3 = geometrySystem.createSphere(sphb3, 30);
SmartPointer<Geometry> sph4 = geometrySystem.createSphere(sphb4, 30);
SmartPointer<Geometry> sph5 = geometrySystem.createSphere(sphb5, 30);
SmartPointer<Geometry> sph6 = geometrySystem.createSphere(sphb6, 10);
SmartPointer<Geometry> sph7 = geometrySystem.createSphere(sphb7, 10);
SmartPointer<Geometry> sph8 = geometrySystem.createSphere(sphb8, 10);
SmartPointer<Geometry> sph9 = geometrySystem.createSphere(sphb9, 10);
sph1->setBounciness(0.0);
sph2->setBounciness(0.0);
sph3->setBounciness(0.0);
sph4->setBounciness(0.0);
sph5->setBounciness(0.0);
sph6->setBounciness(0.0);
sph7->setBounciness(0.0);
sph8->setBounciness(0.0);
sph9->setBounciness(0.0);
Id capsuleId1(Id::typeCapsule, 0);
Id capsuleId2(Id::typeCapsule, 1);
Id capsuleId3(Id::typeCapsule, 2);
Id capsuleId4(Id::typeCapsule, 3);
Id capsuleId5(Id::typeCapsule, 4);
Id capsuleId6(Id::typeCapsule, 5);
Id capsuleId7(Id::typeCapsule, 6);
Id capsuleId8(Id::typeCapsule, 7);
Id capsuleId9(Id::typeCapsule, 8);
// hohle neuen RigidBody
RigidBodyPtr capsb1 = bodySystem.create(capsuleId1);
RigidBodyPtr capsb2 = bodySystem.create(capsuleId2);
RigidBodyPtr capsb3 = bodySystem.create(capsuleId3);
RigidBodyPtr capsb4 = bodySystem.create(capsuleId4);
RigidBodyPtr capsb5 = bodySystem.create(capsuleId5);
RigidBodyPtr capsb6 = bodySystem.create(capsuleId6);
RigidBodyPtr capsb7 = bodySystem.create(capsuleId7);
RigidBodyPtr capsb8 = bodySystem.create(capsuleId8);
RigidBodyPtr capsb9 = bodySystem.create(capsuleId9);
// setzen einiger attribute
sphb1->setPosition(Vector3<float>(0.0,700.0,0.0));//Kopf
capsb1->setPosition(Vector3<float>(0.0,520.0,0.0));//Körper
capsb2->setPosition(Vector3<float>(120.0,600.0,0.0));//linker Oberarm
capsb3->setPosition(Vector3<float>(120.0,460.0,0.0));//linker Unterarm
sphb2->setPosition(Vector3<float>(120.0,380.0,0.0));//linke Hand
sphb6->setPosition(Vector3<float>(120.0,340.0,0.0));//linke Hand Steuerung
capsb4->setPosition(Vector3<float>(-120.0,600.0,0.0));//rechter Oberarm
capsb5->setPosition(Vector3<float>(-120.0,460.0,0.0));//rechter Unterarm
sphb3->setPosition(Vector3<float>(-120.0,380.0,0.0));//rechte Hand
sphb7->setPosition(Vector3<float>(-120.0,340.0,0.0));//rechte Hand Steuerung
capsb6->setPosition(Vector3<float>(40.0,300.0,0.0));//linker Oberschenkel
capsb7->setPosition(Vector3<float>(40.0,160.0,0.0));//linker Unterschenkel
sphb4->setPosition(Vector3<float>(40.0,80.0,0.0));//linker Fuss
sphb8->setPosition(Vector3<float>(40.0,40.0,0.0));//linker Fuss Steuerung
capsb8->setPosition(Vector3<float>(-40.0,300.0,0.0));//rechter Oberschenkel
capsb9->setPosition(Vector3<float>(-40.0,160.0,0.0));//rechter Unterschenkel
sphb5->setPosition(Vector3<float>(-40.0,80.0,0.0));//rechter Fuss
sphb9->setPosition(Vector3<float>(-40.0,40.0,0.0));//rechter Fuss Steuerung
capsb1->setOrientation(Quaternion(0,Vec3(0.0,0.0,1.0)));
//capsb2->setOrientation(Quaternion(M_PI/2,Vec3(0.0,0.0,1.0)));
//capsb3->setOrientation(Quaternion(M_PI/2,Vec3(0.0,0.0,1.0)));
//capsb4->setOrientation(Quaternion(M_PI/2,Vec3(0.0,0.0,1.0)));
//capsb5->setOrientation(Quaternion(M_PI/2,Vec3(0.0,0.0,1.0)));
//capsb6->setOrientation(Quaternion(M_PI/2,Vec3(0.0,0.0,1.0)));
//capsb7->setOrientation(Quaternion(M_PI/2,Vec3(0.0,0.0,1.0)));
//capsb8->setOrientation(Quaternion(M_PI/2,Vec3(0.0,0.0,1.0)));
//capsb9->setOrientation(Quaternion(M_PI/2,Vec3(0.0,0.0,1.0)));
capsb1->setMass(100.0);
capsb2->setMass(100.0);
capsb3->setMass(100.0);
capsb4->setMass(100.0);
capsb5->setMass(100.0);
capsb6->setMass(100.0);
capsb7->setMass(100.0);
capsb8->setMass(100.0);
capsb9->setMass(100.0);
// setzen der geometrie
GeometryPtr caps1 = geometrySystem.createCapsule(capsb1, 40, 160);
GeometryPtr caps2 = geometrySystem.createCapsule(capsb2, 30, 60);
GeometryPtr caps3 = geometrySystem.createCapsule(capsb3, 30, 60);
GeometryPtr caps4 = geometrySystem.createCapsule(capsb4, 30, 60);
GeometryPtr caps5 = geometrySystem.createCapsule(capsb5, 30, 60);
GeometryPtr caps6 = geometrySystem.createCapsule(capsb6, 30, 60);
GeometryPtr caps7 = geometrySystem.createCapsule(capsb7, 30, 60);
GeometryPtr caps8 = geometrySystem.createCapsule(capsb8, 30, 60);
GeometryPtr caps9 = geometrySystem.createCapsule(capsb9, 30, 60);
sph1->setBounciness(0.3);
// ---------------- Ende: Große Kapsel in der Mitte ----------------//
// ---------------- Constraint zwischen Kugel und Kapsel ---- //
Id jointId1(Id::typeBallJoint, 0);
Id jointId2(Id::typeBallJoint, 1);
Id jointId3(Id::typeBallJoint, 2);
Id jointId4(Id::typeBallJoint, 3);
Id jointId5(Id::typeBallJoint, 4);
Id jointId6(Id::typeBallJoint, 5);
Id jointId7(Id::typeBallJoint, 6);
Id jointId8(Id::typeBallJoint, 7);
Id jointId9(Id::typeBallJoint, 8);
Id jointId10(Id::typeBallJoint, 9);
Id jointId11(Id::typeBallJoint, 10);
Id jointId12(Id::typeBallJoint, 11);
Id jointId13(Id::typeBallJoint, 12);
Id jointId14(Id::typeBallJoint, 13);
Id jointId15(Id::typeBallJoint, 14);
Id jointId16(Id::typeBallJoint, 15);
Id jointId17(Id::typeBallJoint, 16);
constraintSystem.createBallAndSocketConstraint(jointId1, sphb1, capsb1, Vec3(0,-70,0), Vec3(0,110,0));
//constraintSystem.createBallAndSocketConstraint(jointId2, capsb2, capsb3, Vec3(0,-65,0), Vec3(0,65,0));
constraintSystem.createHingeConstraint(jointId2, capsb2, capsb3, Vec3(0,-65,0), Vec3(0,65,0), Vec3(1,0,0), Vec3(1,0,0));
constraintSystem.createBallAndSocketConstraint(jointId3, capsb1, capsb2, Vec3(100,80,0), Vec3(0,30,0));
constraintSystem.createBallAndSocketConstraint(jointId10, capsb3, sphb2, Vec3(0,-70,0), Vec3(0,40,0));
constraintSystem.createBallAndSocketConstraint(jointId4, capsb1, capsb4, Vec3(-100,80,0), Vec3(0,30,0));
//constraintSystem.createBallAndSocketConstraint(jointId5, capsb4, capsb5, Vec3(0,-65,0), Vec3(0,65,0));
constraintSystem.createHingeConstraint(jointId5, capsb4, capsb5, Vec3(0,-65,0), Vec3(0,65,0), Vec3(1,0,0), Vec3(1,0,0));
constraintSystem.createBallAndSocketConstraint(jointId11, capsb5, sphb3, Vec3(0,-70,0), Vec3(0,40,0));
//constraintSystem.createBallAndSocketConstraint(jointId6, capsb6, capsb7, Vec3(0,-65,0), Vec3(0,65,0));
constraintSystem.createHingeConstraint(jointId6, capsb6, capsb7, Vec3(0,-65,0), Vec3(0,65,0), Vec3(1,0,0), Vec3(1,0,0));
constraintSystem.createBallAndSocketConstraint(jointId7, capsb1, capsb6, Vec3(50,-160,0), Vec3(0,30,0));
constraintSystem.createBallAndSocketConstraint(jointId12, capsb7, sphb4, Vec3(0,-70,0), Vec3(0,40,0));
//constraintSystem.createBallAndSocketConstraint(jointId9, capsb8, capsb9, Vec3(0,-65,0), Vec3(0,65,0));
constraintSystem.createHingeConstraint(jointId9, capsb8, capsb9, Vec3(0,-65,0), Vec3(0,65,0), Vec3(1,0,0), Vec3(1,0,0));
constraintSystem.createBallAndSocketConstraint(jointId8, capsb1, capsb8, Vec3(-50,-160,0), Vec3(0,30,0));
constraintSystem.createBallAndSocketConstraint(jointId13, capsb9, sphb5, Vec3(0,-70,0), Vec3(0,40,0));
//Steuerungen
constraintSystem.createBallAndSocketConstraint(jointId14, sphb2, sphb6, Vec3(0,-50,0), Vec3(0,0,0));
constraintSystem.createBallAndSocketConstraint(jointId15, sphb3, sphb7, Vec3(0,-50,0), Vec3(0,0,0));
constraintSystem.createBallAndSocketConstraint(jointId16, sphb4, sphb8, Vec3(0,-50,0), Vec3(0,0,0));
constraintSystem.createBallAndSocketConstraint(jointId17, sphb5, sphb9, Vec3(0,-50,0), Vec3(0,0,0));
// ---------------- Ende: Constraint zwischen Kugel und Kapsel ---- //
constraintSystem.buildGraphs();
constraintSystem.setTau(60);
SimonState::exemplar()->setViscositySlowdownAngular(0.8);
SimonState::exemplar()->setViscositySlowdownLinear(0.98);
sph1acc = sphb1;
sph6acc = sphb6;
sph7acc = sphb7;
sph8acc = sphb8;
sph9acc = sphb9;
}
/**
* \brief Start-Funktion der Testumgebung
*
* Diese Funktion wird einmal beim Starten der Testumgebung
* aufgerufen. Hier sollte alles reingeschrieben werden,
* was für die initialisierung der einzelnen Tests nötig ist.
*/
TEFUNC void initialize(int /*argc*/, char** /*argv*/) {
Id id1;
id1.setType(Id::typeBox);
id1.setNumber(1);
SmartPointer<RigidBody> rb = rbs.create(id1);
rb->setMass(200000);
rb->setPosition(Vector3<float>(30.0, 0.0, 0.0));
rb->setPrevPosition(Vector3<float>(30.0, 0.0, 0.0));
rb->setVelocity(Vector3<float>(0.00, 0.00, 0.00));
//rb->setForce(Vector3<float>(0.000, 0.00, 0.00));
rb->setForce(Vector3<float>(0.0, 0.00,0.00));
Quaternion q = Quaternion();
//q.normalize();
rb->setOrientation(q);
rb->setAngularVelocity(Vector3<float>(0.0, 0.0, 0.0));
rb->setInertiaTensor((rb->getMass()/12) * 7200, (rb->getMass()/12) * 7200, (rb->getMass()/12) * 7200);
//rb->setTorque(Vector3<float> (0.0, 0.00, -0.001));
rb->setTorque(Vector3<float> (0.0, 0.0, 0.0));
Id id2;
id2.setType(Id::typeBox);
id2.setNumber(2);
SmartPointer<RigidBody> rb2 = rbs.create(id2);
rb2->setMass(200);
rb2->setPosition(Vector3<float>(-30.0, 0.0, 0.0));
rb2->setPrevPosition(Vector3<float>(-30.0, 0.0, 0.0));
rb2->setVelocity(Vector3<float>(0.0, 0.00, 0.00));
//rb2->setForce(Vector3<float>(0.0,0.0, 0.0));
rb2->setForce(Vector3<float>(0.0,0.0,0.0));
Quaternion q2 = Quaternion();
//q2.normalize();
rb2->setOrientation(q2);
rb2->setAngularVelocity(Vector3<float>(0.0, 0.0, 0.0));
rb2->setInertiaTensor((rb2->getMass()/12) * 7200, (rb2->getMass()/12) * 7200, (rb2->getMass()/12) * 7200);
//rb2->setTorque(Vector3<float> (0.0, 0.0, 0.001));
rb2->setTorque(Vector3<float> (0.0, 0.0,0.0));
Id id3;
id3.setType(Id::typeBox);
id3.setNumber(3);
SmartPointer<RigidBody> rb3 = rbs.create(id3);
rb3->setMass(200);
rb3->setPosition(Vector3<float>(-90.0, 0.0, 0.0));
rb3->setPrevPosition(Vector3<float>(-90.0, 0.0, 0.0));
rb3->setVelocity(Vector3<float>(0.0, 0.00, 0.00));
//rb3->setForce(Vector3<float>(0.0,0.0, 0.0));
rb3->setForce(Vector3<float>(0.0,0.0,0.0));
Quaternion q3 = Quaternion();
//q2.normalize();
rb3->setOrientation(q3);
rb3->setAngularVelocity(Vector3<float>(0.0, 0.0, 0.0));
rb3->setInertiaTensor((rb3->getMass()/12) * 7200, (rb3->getMass()/12) * 7200, (rb3->getMass()/12) * 7200);
//rb3->setTorque(Vector3<float> (0.0, 0.0, 0.001));
rb3->setTorque(Vector3<float> (0.0, 0.0,0.0));
Id cid1;
cid1.setType(Id::typeHingeJoint);
cid1.setNumber(1);
Id cid2;
cid2.setType(Id::typeBallJoint);
cid2.setNumber(2);
Vector3 <float> eq(-30, 0, 0);
Vector3 <float> eq2(30, 0, 0);
//Vector3 <float> eu(-30, 90, 0);
Vector3 <float> eu(0, 0, 30);
//Vector3 <float> eu(10, 0, 0.0000000000000000000285);
//Vector3 <float> eu(10, 0, 0);
//Vector3 <float> eu2(30, 90, 0);
Vector3 <float> eu2(0, 0, 30);
//cs.createBallAndSocketConstraint(cid1, rb, rb2, eq, eq2);
cs.createHingeConstraint(cid1, rb, rb2, eq, eq2, eu, eu2);
//cs.createBallAndSocketConstraint(cid2, rb2, rb3, eq, eq2);
cs.createHingeConstraint(cid2, rb2, rb3, eq, eq2, eu, eu2);
//mc1 = cs.getHingeConstraint(cid1);
//cs.createBallAndSocketConstraint(cid1, rb, rb2, eq, eq2);
cs.buildGraphs();
mrb = rb;
mrb2 = rb2;
//mc1 = cs.getBallAndSocketConstraint(cid1);
//mc2 = cs.getBallAndSocketConstraint(cid2);
cs.printGraphs();
cs.setComputationAlgorithm(1);
cs.setTau(60);
SimonState::exemplar()->setViscositySlowdownAngular(0.7);
SimonState::exemplar()->setViscositySlowdownLinear(0.97);
/*mc1->computeConstraint();
cout << "Constraint:" << endl;
mc1->getConstraint().show();
cout << endl;
cout << "ConstraintDot:" << endl;
mc1->getConstraintDot().show();*/
//SimonState::exemplar()->setGravityVector(Vec3(0,-0.00181,0));
}
