/*
* Open the first part file.
* - Close the fd
* - Reopen the device
*/
static bool dvd_open_first_part(DCR *dcr, int mode)
{
DEVICE *dev = dcr->dev;
Dmsg5(29, "Enter: ==== open_first_part dev=%s Vol=%s mode=%d num_dvd_parts=%d append=%d\n", dev->print_name(),
dev->getVolCatName(), dev->openmode, dev->num_dvd_parts, dev->can_append());
dev->close_part(dcr);
Dmsg2(400, "Call dev->open(vol=%s, mode=%d)\n", dcr->getVolCatName(),
mode);
Dmsg0(100, "Set part=1\n");
dev->part = 1;
dev->part_start = 0;
if (dev->open(dcr, mode) < 0) {
Dmsg0(400, "open dev() failed\n");
return false;
}
Dmsg2(400, "Leave open_first_part state=%s append=%d\n", dev->is_open()?"open":"not open", dev->can_append());
return true;
}
/*********************************************************************
* Acquire device for reading.
* The drive should have previously been reserved by calling
* reserve_device_for_read(). We read the Volume label from the block and
* leave the block pointers just after the label.
*
* Returns: NULL if failed for any reason
* dcr if successful
*/
bool acquire_device_for_read(DCR *dcr)
{
DEVICE *dev;
JCR *jcr = dcr->jcr;
bool ok = false;
bool tape_previously_mounted;
VOL_LIST *vol;
bool try_autochanger = true;
int i;
int vol_label_status;
int retry = 0;
Enter(rdbglvl);
dev = dcr->dev;
dev->Lock_read_acquire();
Dmsg2(rdbglvl, "dcr=%p dev=%p\n", dcr, dcr->dev);
Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
dev->dblock(BST_DOING_ACQUIRE);
if (dev->num_writers > 0) {
Jmsg2(jcr, M_FATAL, 0, _("Acquire read: num_writers=%d not zero. Job %d canceled.\n"),
dev->num_writers, jcr->JobId);
goto get_out;
}
/* Find next Volume, if any */
vol = jcr->VolList;
if (!vol) {
char ed1[50];
Jmsg(jcr, M_FATAL, 0, _("No volumes specified for reading. Job %s canceled.\n"),
edit_int64(jcr->JobId, ed1));
goto get_out;
}
jcr->CurReadVolume++;
for (i=1; i<jcr->CurReadVolume; i++) {
vol = vol->next;
}
if (!vol) {
Jmsg(jcr, M_FATAL, 0, _("Logic error: no next volume to read. Numvol=%d Curvol=%d\n"),
jcr->NumReadVolumes, jcr->CurReadVolume);
goto get_out; /* should not happen */
}
set_dcr_from_vol(dcr, vol);
Dmsg2(rdbglvl, "Want Vol=%s Slot=%d\n", vol->VolumeName, vol->Slot);
/*
* If the MediaType requested for this volume is not the
* same as the current drive, we attempt to find the same
* device that was used to write the orginal volume. If
* found, we switch to using that device.
*
* N.B. A lot of routines rely on the dcr pointer not changing
* read_records.c even has multiple dcrs cached, so we take care
* here to release all important parts of the dcr and re-acquire
* them such as the block pointer (size may change), but we do
* not release the dcr.
*/
Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
if (dcr->media_type[0] && !bstrcmp(dcr->media_type, dev->device->media_type)) {
RCTX rctx;
DIRSTORE *store;
int status;
Jmsg3(jcr, M_INFO, 0, _("Changing read device. Want Media Type=\"%s\" have=\"%s\"\n"
" device=%s\n"),
dcr->media_type, dev->device->media_type, dev->print_name());
Dmsg3(rdbglvl, "Changing read device. Want Media Type=\"%s\" have=\"%s\"\n"
" device=%s\n",
dcr->media_type, dev->device->media_type, dev->print_name());
dev->dunblock(DEV_UNLOCKED);
lock_reservations();
memset(&rctx, 0, sizeof(RCTX));
rctx.jcr = jcr;
jcr->read_dcr = dcr;
jcr->reserve_msgs = New(alist(10, not_owned_by_alist));
rctx.any_drive = true;
rctx.device_name = vol->device;
store = new DIRSTORE;
memset(store, 0, sizeof(DIRSTORE));
store->name[0] = 0; /* No dir name */
bstrncpy(store->media_type, vol->MediaType, sizeof(store->media_type));
bstrncpy(store->pool_name, dcr->pool_name, sizeof(store->pool_name));
bstrncpy(store->pool_type, dcr->pool_type, sizeof(store->pool_type));
store->append = false;
rctx.store = store;
clean_device(dcr); /* clean up the dcr */
/*
* Search for a new device
*/
status = search_res_for_device(rctx);
release_reserve_messages(jcr); /* release queued messages */
unlock_reservations();
if (status == 1) { /* found new device to use */
/*
* Switching devices, so acquire lock on new device,
* then release the old one.
*/
dcr->dev->Lock_read_acquire(); /* lock new one */
dev->Unlock_read_acquire(); /* release old one */
dev = dcr->dev; /* get new device pointer */
dev->dblock(BST_DOING_ACQUIRE);
dcr->VolumeName[0] = 0;
Jmsg(jcr, M_INFO, 0, _("Media Type change. New read device %s chosen.\n"),
dev->print_name());
Dmsg1(50, "Media Type change. New read device %s chosen.\n", dev->print_name());
bstrncpy(dcr->VolumeName, vol->VolumeName, sizeof(dcr->VolumeName));
dcr->setVolCatName(vol->VolumeName);
bstrncpy(dcr->media_type, vol->MediaType, sizeof(dcr->media_type));
dcr->VolCatInfo.Slot = vol->Slot;
dcr->VolCatInfo.InChanger = vol->Slot > 0;
bstrncpy(dcr->pool_name, store->pool_name, sizeof(dcr->pool_name));
bstrncpy(dcr->pool_type, store->pool_type, sizeof(dcr->pool_type));
} else {
/* error */
Jmsg1(jcr, M_FATAL, 0, _("No suitable device found to read Volume \"%s\"\n"),
vol->VolumeName);
Dmsg1(rdbglvl, "No suitable device found to read Volume \"%s\"\n", vol->VolumeName);
goto get_out;
}
}
Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
dev->clear_unload();
if (dev->vol && dev->vol->is_swapping()) {
dev->vol->set_slot(vol->Slot);
Dmsg3(rdbglvl, "swapping: slot=%d Vol=%s dev=%s\n", dev->vol->get_slot(),
dev->vol->vol_name, dev->print_name());
}
init_device_wait_timers(dcr);
tape_previously_mounted = dev->can_read() || dev->can_append() ||
dev->is_labeled();
// tape_initially_mounted = tape_previously_mounted;
/* Volume info is always needed because of VolParts */
Dmsg1(rdbglvl, "dir_get_volume_info vol=%s\n", dcr->VolumeName);
if (!dcr->dir_get_volume_info(GET_VOL_INFO_FOR_READ)) {
Dmsg2(rdbglvl, "dir_get_vol_info failed for vol=%s: %s\n",
dcr->VolumeName, jcr->errmsg);
Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
}
dev->set_load(); /* set to load volume */
for ( ;; ) {
/* If not polling limit retries */
if (!dev->poll && retry++ > 10) {
break;
}
dev->clear_labeled(); /* force reread of label */
if (job_canceled(jcr)) {
char ed1[50];
Mmsg1(dev->errmsg, _("Job %s canceled.\n"), edit_int64(jcr->JobId, ed1));
Jmsg(jcr, M_INFO, 0, dev->errmsg);
goto get_out; /* error return */
}
dcr->do_unload();
dcr->do_swapping(false/*!is_writing*/);
dcr->do_load(false /*!is_writing*/);
set_dcr_from_vol(dcr, vol); /* refresh dcr with desired volume info */
/*
* This code ensures that the device is ready for
* reading. If it is a file, it opens it.
* If it is a tape, it checks the volume name
*/
Dmsg1(rdbglvl, "stored: open vol=%s\n", dcr->VolumeName);
if (!dev->open(dcr, OPEN_READ_ONLY)) {
if (!dev->poll) {
Jmsg3(jcr, M_WARNING, 0, _("Read open device %s Volume \"%s\" failed: ERR=%s\n"),
dev->print_name(), dcr->VolumeName, dev->bstrerror());
}
goto default_path;
}
Dmsg1(rdbglvl, "opened dev %s OK\n", dev->print_name());
/* Read Volume Label */
Dmsg0(rdbglvl, "calling read-vol-label\n");
vol_label_status = read_dev_volume_label(dcr);
switch (vol_label_status) {
case VOL_OK:
Dmsg0(rdbglvl, "Got correct volume.\n");
ok = true;
dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
break; /* got it */
case VOL_IO_ERROR:
Dmsg0(rdbglvl, "IO Error\n");
/*
* Send error message generated by read_dev_volume_label()
* only we really had a tape mounted. This supresses superfluous
* error messages when nothing is mounted.
*/
if (tape_previously_mounted) {
Jmsg(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
}
goto default_path;
case VOL_NAME_ERROR:
Dmsg3(rdbglvl, "Vol name=%s want=%s drv=%s.\n", dev->VolHdr.VolumeName,
dcr->VolumeName, dev->print_name());
if (dev->is_volume_to_unload()) {
goto default_path;
}
dev->set_unload(); /* force unload of unwanted tape */
if (!unload_autochanger(dcr, -1)) {
/* at least free the device so we can re-open with correct volume */
dev->close(dcr);
free_volume(dev);
}
dev->set_load();
/* Fall through */
default:
Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
default_path:
Dmsg0(rdbglvl, "default path\n");
tape_previously_mounted = true;
/*
* If the device requires mount, close it, so the device can be ejected.
*/
if (dev->requires_mount()) {
dev->close(dcr);
free_volume(dev);
}
/* Call autochanger only once unless ask_sysop called */
if (try_autochanger) {
int status;
Dmsg2(rdbglvl, "calling autoload Vol=%s Slot=%d\n",
dcr->VolumeName, dcr->VolCatInfo.Slot);
status = autoload_device(dcr, 0, NULL);
if (status > 0) {
try_autochanger = false;
continue; /* try reading volume mounted */
}
}
/* Mount a specific volume and no other */
Dmsg0(rdbglvl, "calling dir_ask_sysop\n");
if (!dcr->dir_ask_sysop_to_mount_volume(ST_READREADY)) {
goto get_out; /* error return */
}
/* Volume info is always needed because of VolParts */
Dmsg1(150, "dir_get_volume_info vol=%s\n", dcr->VolumeName);
if (!dcr->dir_get_volume_info(GET_VOL_INFO_FOR_READ)) {
Dmsg2(150, "dir_get_vol_info failed for vol=%s: %s\n",
dcr->VolumeName, jcr->errmsg);
Jmsg1(jcr, M_WARNING, 0, "Read acquire: %s", jcr->errmsg);
}
dev->set_load(); /* set to load volume */
try_autochanger = true; /* permit trying the autochanger again */
continue; /* try reading again */
} /* end switch */
break;
} /* end for loop */
if (!ok) {
Jmsg1(jcr, M_FATAL, 0, _("Too many errors trying to mount device %s for reading.\n"),
dev->print_name());
goto get_out;
}
dev->clear_append();
dev->set_read();
jcr->sendJobStatus(JS_Running);
Jmsg(jcr, M_INFO, 0, _("Ready to read from volume \"%s\" on device %s.\n"),
dcr->VolumeName, dev->print_name());
get_out:
dev->Lock();
dcr->clear_reserved();
/*
* Normally we are blocked, but in at least one error case above
* we are not blocked because we unsuccessfully tried changing
* devices.
*/
if (dev->is_blocked()) {
dev->dunblock(DEV_LOCKED);
} else {
dev->Unlock(); /* dunblock() unlock the device too */
}
Dmsg2(rdbglvl, "dcr=%p dev=%p\n", dcr, dcr->dev);
Dmsg2(rdbglvl, "MediaType dcr=%s dev=%s\n", dcr->media_type, dev->device->media_type);
dev->Unlock_read_acquire();
Leave(rdbglvl);
return ok;
}
/*
* Acquire device for writing. We permit multiple writers.
* If this is the first one, we read the label.
*
* Returns: NULL if failed for any reason
* dcr if successful.
* Note, normally reserve_device_for_append() is called
* before this routine.
*/
DCR *acquire_device_for_append(DCR *dcr)
{
DEVICE *dev = dcr->dev;
JCR *jcr = dcr->jcr;
bool ok = false;
bool have_vol = false;
Enter(200);
init_device_wait_timers(dcr);
dev->Lock_acquire(); /* only one job at a time */
dev->Lock();
Dmsg1(100, "acquire_append device is %s\n", dev->is_tape() ? "tape" : "disk");
/*
* With the reservation system, this should not happen
*/
if (dev->can_read()) {
Jmsg1(jcr, M_FATAL, 0, _("Want to append, but device %s is busy reading.\n"), dev->print_name());
Dmsg1(200, "Want to append but device %s is busy reading.\n", dev->print_name());
goto get_out;
}
dev->clear_unload();
/*
* have_vol defines whether or not mount_next_write_volume should
* ask the Director again about what Volume to use.
*/
if (dev->can_append() && dcr->is_suitable_volume_mounted() &&
!bstrcmp(dcr->VolCatInfo.VolCatStatus, "Recycle")) {
Dmsg0(190, "device already in append.\n");
/*
* At this point, the correct tape is already mounted, so
* we do not need to do mount_next_write_volume(), unless
* we need to recycle the tape.
*/
if (dev->num_writers == 0) {
dev->VolCatInfo = dcr->VolCatInfo; /* structure assignment */
}
have_vol = dcr->is_tape_position_ok();
}
if (!have_vol) {
dev->rLock(true);
block_device(dev, BST_DOING_ACQUIRE);
dev->Unlock();
Dmsg1(190, "jid=%u Do mount_next_write_vol\n", (uint32_t)jcr->JobId);
if (!dcr->mount_next_write_volume()) {
if (!job_canceled(jcr)) {
/* Reduce "noise" -- don't print if job canceled */
Jmsg(jcr, M_FATAL, 0, _("Could not ready device %s for append.\n"),
dev->print_name());
Dmsg1(200, "Could not ready device %s for append.\n",
dev->print_name());
}
dev->Lock();
unblock_device(dev);
goto get_out;
}
Dmsg2(190, "Output pos=%u:%u\n", dcr->dev->file, dcr->dev->block_num);
dev->Lock();
unblock_device(dev);
}
dev->num_writers++; /* we are now a writer */
if (jcr->NumWriteVolumes == 0) {
jcr->NumWriteVolumes = 1;
}
dev->VolCatInfo.VolCatJobs++; /* increment number of jobs on vol */
Dmsg4(100, "=== nwriters=%d nres=%d vcatjob=%d dev=%s\n",
dev->num_writers, dev->num_reserved(), dev->VolCatInfo.VolCatJobs, dev->print_name());
dcr->dir_update_volume_info(false, false); /* send Volume info to Director */
ok = true;
get_out:
/* Don't plugin close here, we might have multiple writers */
dcr->clear_reserved();
dev->Unlock();
dev->Unlock_acquire();
Leave(200);
return ok ? dcr : NULL;
}
/*
* Open the next part file.
* - Close the fd
* - Increment part number
* - Reopen the device
*/
int dvd_open_next_part(DCR *dcr)
{
DEVICE *dev = dcr->dev;
Dmsg6(29, "Enter: == open_next_part part=%d npart=%d dev=%s vol=%s mode=%d file_addr=%d\n",
dev->part, dev->num_dvd_parts, dev->print_name(),
dev->getVolCatName(), dev->openmode, dev->file_addr);
if (!dev->is_dvd()) {
Dmsg1(100, "Device %s is not dvd!!!!\n", dev->print_name());
return -1;
}
/* When appending, do not open a new part if the current is empty */
if (dev->can_append() && (dev->part > dev->num_dvd_parts) &&
(dev->part_size == 0)) {
Dmsg0(29, "open_next_part exited immediately (dev->part_size == 0).\n");
return dev->fd();
}
dev->close_part(dcr); /* close current part */
/*
* If we have a spooled part open, write it to the
* DVD before opening the next part.
*/
if (dev->is_part_spooled()) {
Dmsg2(100, "Before open next write previous. part=%d num_parts=%d\n",
dev->part, dev->num_dvd_parts);
if (!dvd_write_part(dcr)) {
Dmsg0(29, "Error in dvd_write part.\n");
return -1;
}
}
dev->part_start += dev->part_size;
dev->part++;
Dmsg2(29, "Inc part=%d num_dvd_parts=%d\n", dev->part, dev->num_dvd_parts);
/* Are we working on a part past what is written in the DVD? */
if (dev->num_dvd_parts < dev->part) {
POOL_MEM archive_name(PM_FNAME);
struct stat buf;
/*
* First check what is on DVD. If our part is there, we
* are in trouble, so bail out.
* NB: This is however not a problem if we are writing the first part.
* It simply means that we are over writing an existing volume...
*/
if (dev->num_dvd_parts > 0) {
make_mounted_dvd_filename(dev, archive_name); /* makes dvd name */
Dmsg1(100, "Check if part on DVD: %s\n", archive_name.c_str());
if (stat(archive_name.c_str(), &buf) == 0) {
/* bad news bail out */
dev->set_part_spooled(false);
Mmsg1(&dev->errmsg, _("Next Volume part already exists on DVD. Cannot continue: %s\n"),
archive_name.c_str());
return -1;
}
}
#ifdef neeeded
Dmsg2(400, "num_dvd_parts=%d part=%d\n", dev->num_dvd_parts, dev->part);
make_spooled_dvd_filename(dev, archive_name); /* makes spool name */
/* Check if the next part exists in spool directory . */
Dmsg1(100, "Check if part on spool: %s\n", archive_name.c_str());
if ((stat(archive_name.c_str(), &buf) == 0) || (errno != ENOENT)) {
Dmsg1(29, "======= Part %s is in the way, deleting it...\n", archive_name.c_str());
/* Then try to unlink it */
if (unlink(archive_name.c_str()) < 0) {
berrno be;
dev->set_part_spooled(false);
dev->dev_errno = errno;
Mmsg2(dev->errmsg, _("open_next_part can't unlink existing part %s, ERR=%s\n"),
archive_name.c_str(), be.bstrerror());
return -1;
}
}
#endif
}
Dmsg2(400, "Call dev->open(vol=%s, mode=%d)\n", dcr->getVolCatName(),
dev->openmode);
/* Open next part. Note, this sets part_size for part opened. */
if (dev->open(dcr, OPEN_READ_ONLY) < 0) {
return -1;
}
dev->set_labeled(); /* all next parts are "labeled" */
return dev->fd();
}