void SCH_EDIT_FRAME::OnDragItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::DraggableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LINE_T:
case SCH_JUNCTION_T:
if( item->GetLayer() == LAYER_BUS )
break;
// Fall thru if item is not on bus layer.
case SCH_COMPONENT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_SHEET_T:
m_canvas->MoveCursorToCrossHair();
// The easiest way to handle a drag component or sheet command
// is to simulate a block drag command
if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
{
if( !HandleBlockBegin( &dc, BLOCK_DRAG, GetCrossHairPosition() ) )
break;
// Give a non null size to the search block:
screen->m_BlockLocate.Inflate( 1 );
HandleBlockEnd( &dc );
}
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot drag schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
}
void SCH_EDIT_FRAME::OnOrient( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
// Allows block rotate operation on hot key.
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
if( aEvent.GetId() == ID_SCH_MIRROR_X )
{
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetMessageBlock( this );
screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_X );
HandleBlockEnd( &dc );
}
else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
{
m_canvas->MoveCursorToCrossHair();
screen->m_BlockLocate.SetMessageBlock( this );
screen->m_BlockLocate.SetCommand( BLOCK_MIRROR_Y );
HandleBlockEnd( &dc );
}
else
{
wxFAIL_MSG( wxT( "Unknown block oriention command ID." ) );
}
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::OrientableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
if( aEvent.GetId() == ID_SCH_MIRROR_X )
OrientComponent( CMP_MIRROR_X );
else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
OrientComponent( CMP_MIRROR_Y );
else if( aEvent.GetId() == ID_SCH_ORIENT_NORMAL )
OrientComponent( CMP_NORMAL );
else
wxFAIL_MSG( wxT( "Invalid orient schematic component command ID." ) );
break;
case SCH_BITMAP_T:
if( aEvent.GetId() == ID_SCH_MIRROR_X )
MirrorImage( (SCH_BITMAP*) item, true );
else if( aEvent.GetId() == ID_SCH_MIRROR_Y )
MirrorImage( (SCH_BITMAP*) item, false );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Schematic object type %s cannot be oriented." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
void SCH_EDIT_FRAME::OnRotate( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
// Allows block rotate operation on hot key.
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
screen->m_BlockLocate.SetCommand( BLOCK_ROTATE );
HandleBlockEnd( &dc );
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::RotatableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
if( aEvent.GetId() == ID_SCH_ROTATE_CLOCKWISE )
OrientComponent( CMP_ROTATE_CLOCKWISE );
else if( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE )
OrientComponent( CMP_ROTATE_COUNTERCLOCKWISE );
else
wxFAIL_MSG( wxT( "Unknown rotate item command ID." ) );
break;
case SCH_TEXT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
m_canvas->MoveCursorToCrossHair();
ChangeTextOrient( (SCH_TEXT*) item, &dc );
break;
case SCH_FIELD_T:
m_canvas->MoveCursorToCrossHair();
RotateField( (SCH_FIELD*) item, &dc );
break;
case SCH_BITMAP_T:
RotateImage( (SCH_BITMAP*) item );
break;
case SCH_SHEET_T: /// @todo allow sheet rotate on hotkey
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot rotate schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
void SCH_EDIT_FRAME::OnEditItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
// Set the locat filter, according to the edit command
const KICAD_T* filterList = SCH_COLLECTOR::EditableItems;
const KICAD_T* filterListAux = NULL;
switch( aEvent.GetId() )
{
case ID_SCH_EDIT_COMPONENT_REFERENCE:
filterList = SCH_COLLECTOR::CmpFieldReferenceOnly;
filterListAux = SCH_COLLECTOR::ComponentsOnly;
break;
case ID_SCH_EDIT_COMPONENT_VALUE:
filterList = SCH_COLLECTOR::CmpFieldValueOnly;
filterListAux = SCH_COLLECTOR::ComponentsOnly;
break;
case ID_SCH_EDIT_COMPONENT_FOOTPRINT:
filterList = SCH_COLLECTOR::CmpFieldFootprintOnly;
filterListAux = SCH_COLLECTOR::ComponentsOnly;
break;
default:
break;
}
item = LocateAndShowItem( data->GetPosition(), filterList, aEvent.GetInt() );
// If no item found, and if an auxiliary filter exists, try to use it
if( !item && filterListAux )
item = LocateAndShowItem( data->GetPosition(), filterListAux, aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
{
switch( aEvent.GetId() )
{
case ID_SCH_EDIT_COMPONENT_REFERENCE:
EditComponentFieldText( ( (SCH_COMPONENT*) item )->GetField( REFERENCE ) );
break;
case ID_SCH_EDIT_COMPONENT_VALUE:
EditComponentFieldText( ( (SCH_COMPONENT*) item )->GetField( VALUE ) );
break;
case ID_SCH_EDIT_COMPONENT_FOOTPRINT:
EditComponentFieldText( ( (SCH_COMPONENT*) item )->GetField( FOOTPRINT ) );
break;
case ID_SCH_EDIT_ITEM:
EditComponent( (SCH_COMPONENT*) item );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Invalid schematic component edit command ID %d" ),
aEvent.GetId() ) );
}
break;
}
case SCH_SHEET_T:
EditSheet( (SCH_SHEET*) item, &dc );
break;
case SCH_SHEET_PIN_T:
EditSheetPin( (SCH_SHEET_PIN*) item, &dc );
break;
case SCH_TEXT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
EditSchematicText( (SCH_TEXT*) item );
break;
case SCH_FIELD_T:
EditComponentFieldText( (SCH_FIELD*) item );
break;
case SCH_BITMAP_T:
EditImage( (SCH_BITMAP*) item );
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot edit schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
void SCH_EDIT_FRAME::OnSelectTool( wxCommandEvent& aEvent )
{
int id = aEvent.GetId();
// Stop the current command and deselect the current tool.
m_canvas->EndMouseCapture( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor() );
switch( id )
{
case ID_NO_TOOL_SELECTED:
SetToolID( id, m_canvas->GetDefaultCursor(), _( "No tool selected" ) );
break;
case ID_HIERARCHY_PUSH_POP_BUTT:
SetToolID( id, wxCURSOR_HAND, _( "Descend or ascend hierarchy" ) );
break;
case ID_NOCONN_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add no connect" ) );
break;
case ID_WIRE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add wire" ) );
break;
case ID_BUS_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add bus" ) );
break;
case ID_LINE_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add lines" ) );
break;
case ID_JUNCTION_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add junction" ) );
break;
case ID_LABEL_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add label" ) );
break;
case ID_GLABEL_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add global label" ) );
break;
case ID_HIERLABEL_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add hierarchical label" ) );
break;
case ID_TEXT_COMMENT_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add text" ) );
break;
case ID_ADD_IMAGE_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add image" ) );
break;
case ID_WIRETOBUS_ENTRY_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add wire to bus entry" ) );
break;
case ID_BUSTOBUS_ENTRY_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add bus to bus entry" ) );
break;
case ID_SHEET_SYMBOL_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add sheet" ) );
break;
case ID_SHEET_PIN_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add sheet pins" ) );
break;
case ID_IMPORT_HLABEL_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Import sheet pins" ) );
break;
case ID_SCH_PLACE_COMPONENT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add component" ) );
break;
case ID_PLACE_POWER_BUTT:
SetToolID( id, wxCURSOR_PENCIL, _( "Add power" ) );
break;
case ID_SCHEMATIC_DELETE_ITEM_BUTT:
SetToolID( id, wxCURSOR_BULLSEYE, _( "Delete item" ) );
break;
default:
SetRepeatItem( NULL );
}
// Simulate left click event if we got here from a hot key.
if( aEvent.GetClientObject() != NULL )
{
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxPoint pos = data->GetPosition();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
OnLeftClick( &dc, pos );
}
}
void SCH_EDIT_FRAME::OnMoveItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
// trying to move an item when there is a block at the same time is not acceptable
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::MovableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
switch( item->Type() )
{
case SCH_LINE_T:
break;
case SCH_JUNCTION_T:
case SCH_NO_CONNECT_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
case SCH_COMPONENT_T:
case SCH_SHEET_PIN_T:
case SCH_FIELD_T:
MoveItem( item, &dc );
break;
case SCH_BITMAP_T:
MoveImage( (SCH_BITMAP*) item, &dc );
break;
case SCH_SHEET_T:
StartMoveSheet( (SCH_SHEET*) item, &dc );
break;
case SCH_MARKER_T:
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot move item type %s" ),
GetChars( item->GetClass() ) ) );
break;
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetRepeatItem( NULL );
}
void SCH_EDIT_FRAME::OnRotate( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
INSTALL_UNBUFFERED_DC( dc, m_canvas );
// Allows block rotate operation on hot key.
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
screen->m_BlockLocate.SetCommand( BLOCK_ROTATE );
HandleBlockEnd( &dc );
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::RotatableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
switch( item->Type() )
{
case SCH_COMPONENT_T:
{
SCH_COMPONENT* component = static_cast<SCH_COMPONENT*>( item );
if( aEvent.GetId() == ID_SCH_ROTATE_CLOCKWISE )
OrientComponent( CMP_ROTATE_CLOCKWISE );
else if( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE )
OrientComponent( CMP_ROTATE_COUNTERCLOCKWISE );
else
wxFAIL_MSG( wxT( "Unknown rotate item command ID." ) );
if( m_autoplaceFields )
component->AutoAutoplaceFields( GetScreen() );
m_canvas->Refresh();
break;
}
case SCH_TEXT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
m_canvas->MoveCursorToCrossHair();
ChangeTextOrient( (SCH_TEXT*) item );
m_canvas->Refresh();
break;
case SCH_FIELD_T:
m_canvas->MoveCursorToCrossHair();
RotateField( (SCH_FIELD*) item );
if( item->GetParent()->Type() == SCH_COMPONENT_T )
{
// Now that we're moving a field, they're no longer autoplaced.
SCH_COMPONENT *parent = static_cast<SCH_COMPONENT*>( item->GetParent() );
parent->ClearFieldsAutoplaced();
}
m_canvas->Refresh();
break;
case SCH_BITMAP_T:
RotateImage( (SCH_BITMAP*) item );
break;
case SCH_SHEET_T:
if( !item->IsNew() ) // rotate a sheet during its creation has no sense
{
bool retCCW = ( aEvent.GetId() == ID_SCH_ROTATE_COUNTERCLOCKWISE );
RotateHierarchicalSheet( static_cast<SCH_SHEET*>( item ), retCCW );
}
break;
case SCH_JUNCTION_T:
case SCH_NO_CONNECT_T:
// these items are not rotated, because rotation does not change them.
break;
default:
// Other items (wires...) cannot be rotated, at least during creation
if( item->IsNew() )
break;
wxFAIL_MSG( wxString::Format( wxT( "Cannot rotate schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
if( item->GetFlags() == 0 )
screen->SetCurItem( NULL );
}
void SCH_EDIT_FRAME::OnMoveItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
if( screen->m_BlockLocate.GetState() != STATE_NO_BLOCK )
{
// trying to move an item when there is a block at the same time is not acceptable
return;
}
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::MovableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
}
INSTALL_UNBUFFERED_DC( dc, m_canvas );
switch( item->Type() )
{
case SCH_LINE_T:
break;
case SCH_JUNCTION_T:
case SCH_NO_CONNECT_T:
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_TEXT_T:
case SCH_COMPONENT_T:
case SCH_SHEET_PIN_T:
case SCH_FIELD_T:
case SCH_SHEET_T:
PrepareMoveItem( item, &dc );
break;
case SCH_BITMAP_T:
// move an image is a special case:
// we cannot undraw/redraw a bitmap just using our xor mode
// the MoveImage function handle this undraw/redraw difficulty
// By redrawing the full bounding box
MoveImage( (SCH_BITMAP*) item, &dc );
break;
case SCH_MARKER_T:
// Moving a marker has no sense
break;
default:
// Unknown items cannot be moved
wxFAIL_MSG( wxString::Format(
wxT( "Cannot move item type %d" ), item->Type() ) );
break;
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetRepeatItem( NULL );
}
void SCH_EDIT_FRAME::OnDragItem( wxCommandEvent& aEvent )
{
SCH_SCREEN* screen = GetScreen();
SCH_ITEM* item = screen->GetCurItem();
// The easiest way to handle a menu or a hot key drag command
// is to simulate a block drag command
//
// When a drag item is requested, some items use a BLOCK_DRAG_ITEM drag type
// an some items use a BLOCK_DRAG drag type (mainly a junction)
// a BLOCK_DRAG collects all items in a block (here a 2x2 rect centered on the cursor)
// and BLOCK_DRAG_ITEM drag only the selected item
BLOCK_COMMAND_T dragType = BLOCK_DRAG_ITEM;
if( item == NULL )
{
// If we didn't get here by a hot key, then something has gone wrong.
if( aEvent.GetInt() == 0 )
return;
EDA_HOTKEY_CLIENT_DATA* data = (EDA_HOTKEY_CLIENT_DATA*) aEvent.GetClientObject();
wxCHECK_RET( data != NULL, wxT( "Invalid hot key client object." ) );
item = LocateAndShowItem( data->GetPosition(), SCH_COLLECTOR::DraggableItems,
aEvent.GetInt() );
// Exit if no item found at the current location or the item is already being edited.
if( (item == NULL) || (item->GetFlags() != 0) )
return;
// When a junction or a node is found, a BLOCK_DRAG is better
if( m_collectedItems.IsCorner() || m_collectedItems.IsNode( false )
|| m_collectedItems.IsDraggableJunction() )
dragType = BLOCK_DRAG;
}
switch( item->Type() )
{
case SCH_BUS_BUS_ENTRY_T:
case SCH_BUS_WIRE_ENTRY_T:
case SCH_LINE_T:
case SCH_JUNCTION_T:
case SCH_COMPONENT_T:
case SCH_LABEL_T:
case SCH_GLOBAL_LABEL_T:
case SCH_HIERARCHICAL_LABEL_T:
case SCH_SHEET_T:
m_canvas->MoveCursorToCrossHair();
if( screen->m_BlockLocate.GetState() == STATE_NO_BLOCK )
{
INSTALL_UNBUFFERED_DC( dc, m_canvas );
if( !HandleBlockBegin( &dc, dragType, GetCrossHairPosition() ) )
break;
// Give a non null size to the search block:
screen->m_BlockLocate.Inflate( 1 );
HandleBlockEnd( &dc );
}
break;
default:
wxFAIL_MSG( wxString::Format( wxT( "Cannot drag schematic item type %s." ),
GetChars( item->GetClass() ) ) );
}
}