void SpikeDetectorEditor::drawElectrodeButtons(int ID)
{
SpikeDetector* processor = (SpikeDetector*) getProcessor();
electrodeButtons.clear();
int width = 20;
int height = 15;
int numChannels = processor->getNumChannels(ID);
int row = 0;
int column = 0;
Array<int> activeChannels;
Array<double> thresholds;
for (int i = 0; i < numChannels; i++)
{
ElectrodeButton* button = new ElectrodeButton(processor->getChannel(ID,i)+1);
electrodeButtons.add(button);
thresholds.add(processor->getChannelThreshold(ID,i));
if (electrodeEditorButtons[0]->getToggleState())
{
button->setToggleState(false, dontSendNotification);
button->setRadioGroupId(299);
}
else
{
activeChannels.add(processor->getChannel(ID,i));
button->setToggleState(processor->isChannelActive(ID,i), dontSendNotification);
}
if (numChannels < 3)
button->setBounds(145+(column++)*width, 78+row*height, width, 15);
else
button->setBounds(145+(column++)*width, 70+row*height, width, 15);
addAndMakeVisible(button);
button->addListener(this);
if (column%2 == 0)
{
column = 0;
row++;
}
}
channelSelector->setActiveChannels(activeChannels);
thresholdSlider->setValues(thresholds);
}
RHD2000Editor::RHD2000Editor(GenericProcessor* parentNode,
RHD2000Thread* board_,
bool useDefaultParameterEditors
)
: GenericEditor(parentNode, useDefaultParameterEditors), board(board_)
{
desiredWidth = 260;
// add headstage-specific controls (currently just an enable/disable button)
for (int i = 0; i < 4; i++)
{
HeadstageOptionsInterface* hsOptions = new HeadstageOptionsInterface(board, this, i);
headstageOptionsInterfaces.add(hsOptions);
addAndMakeVisible(hsOptions);
hsOptions->setBounds(3, 28+i*20, 70, 18);
}
// add sample rate selection
sampleRateInterface = new SampleRateInterface(board, this);
addAndMakeVisible(sampleRateInterface);
sampleRateInterface->setBounds(80, 25, 100, 50);
// add Bandwidth selection
bandwidthInterface = new BandwidthInterface(board, this);
addAndMakeVisible(bandwidthInterface);
bandwidthInterface->setBounds(80, 65, 80, 50);
// add rescan button
rescanButton = new UtilityButton("RESCAN", Font("Small Text", 13, Font::plain));
rescanButton->setRadius(3.0f);
rescanButton->setBounds(6, 108,65,18);
rescanButton->addListener(this);
rescanButton->setTooltip("Check for connected headstages");
addAndMakeVisible(rescanButton);
for (int i = 0; i < 2; i++)
{
ElectrodeButton* button = new ElectrodeButton(-1);
electrodeButtons.add(button);
button->setBounds(190+i*25, 40, 25, 15);
button->setChannelNum(-1);
button->setToggleState(false,false);
button->setRadioGroupId(999);
addAndMakeVisible(button);
button->addListener(this);
if (i == 0)
{
button->setTooltip("Audio monitor left channel");
} else {
button->setTooltip("Audio monitor right channel");
}
}
audioLabel = new Label("audio label", "Audio out");
audioLabel->setBounds(180,25,75,15);
audioLabel->setFont(Font("Small Text", 10, Font::plain));
audioLabel->setColour(Label::textColourId, Colours::darkgrey);
addAndMakeVisible(audioLabel);
// add HW audio parameter selection
audioInterface = new AudioInterface(board, this);
addAndMakeVisible(audioInterface);
audioInterface->setBounds(165, 65, 65, 50);
adcButton = new UtilityButton("ADC 1-8", Font("Small Text", 13, Font::plain));
adcButton->setRadius(3.0f);
adcButton->setBounds(165,100,65,18);
adcButton->addListener(this);
adcButton->setClickingTogglesState(true);
adcButton->setTooltip("Enable/disable ADC channels");
addAndMakeVisible(adcButton);
}
RHD2000Editor::RHD2000Editor(GenericProcessor* parentNode,
RHD2000Thread* board_,
bool useDefaultParameterEditors
)
: VisualizerEditor(parentNode, useDefaultParameterEditors), board(board_)
{
canvas = nullptr;
desiredWidth = 340;
tabText = "FPGA";
measureWhenRecording = false;
saveImpedances = false;
impedanceData = new ImpedanceData();
impedanceData->valid = false;
// add headstage-specific controls (currently just an enable/disable button)
for (int i = 0; i < 4; i++)
{
HeadstageOptionsInterface* hsOptions = new HeadstageOptionsInterface(board, this, i);
headstageOptionsInterfaces.add(hsOptions);
addAndMakeVisible(hsOptions);
hsOptions->setBounds(3, 28+i*20, 70, 18);
}
// add sample rate selection
sampleRateInterface = new SampleRateInterface(board, this);
addAndMakeVisible(sampleRateInterface);
sampleRateInterface->setBounds(80, 25, 110, 50);
// add Bandwidth selection
bandwidthInterface = new BandwidthInterface(board, this);
addAndMakeVisible(bandwidthInterface);
bandwidthInterface->setBounds(80, 58, 80, 50);
// add DSP selection
// dspInterface = new DSPInterface(board, this);
// addAndMakeVisible(dspInterface);
// dspInterface->setBounds(80, 58, 80, 50);
// add rescan button
rescanButton = new UtilityButton("RESCAN", Font("Small Text", 13, Font::plain));
rescanButton->setRadius(3.0f);
rescanButton->setBounds(6, 108,65,18);
rescanButton->addListener(this);
rescanButton->setTooltip("Check for connected headstages");
addAndMakeVisible(rescanButton);
for (int i = 0; i < 2; i++)
{
ElectrodeButton* button = new ElectrodeButton(-1);
electrodeButtons.add(button);
button->setBounds(200+i*25, 40, 25, 15);
button->setChannelNum(-1);
button->setToggleState(false, dontSendNotification);
button->setRadioGroupId(999);
addAndMakeVisible(button);
button->addListener(this);
if (i == 0)
{
button->setTooltip("Audio monitor left channel");
}
else
{
button->setTooltip("Audio monitor right channel");
}
}
audioLabel = new Label("audio label", "Audio out");
audioLabel->setBounds(190,25,75,15);
audioLabel->setFont(Font("Small Text", 10, Font::plain));
audioLabel->setColour(Label::textColourId, Colours::darkgrey);
addAndMakeVisible(audioLabel);
// add HW audio parameter selection
audioInterface = new AudioInterface(board, this);
addAndMakeVisible(audioInterface);
audioInterface->setBounds(179, 58, 70, 50);
clockInterface = new ClockDivideInterface(board, this);
addAndMakeVisible(clockInterface);
clockInterface->setBounds(179, 82, 70, 50);
adcButton = new UtilityButton("ADC 1-8", Font("Small Text", 13, Font::plain));
adcButton->setRadius(3.0f);
adcButton->setBounds(179,108,70,18);
adcButton->addListener(this);
adcButton->setClickingTogglesState(true);
adcButton->setTooltip("Enable/disable ADC channels");
addAndMakeVisible(adcButton);
ledButton = new UtilityButton("LED", Font("Very Small Text", 13, Font::plain));
ledButton->setRadius(3.0f);
ledButton->setBounds(140, 108, 30, 18);
ledButton->addListener(this);
ledButton->setClickingTogglesState(true);
ledButton->setTooltip("Enable/disable board LEDs");
addAndMakeVisible(ledButton);
ledButton->setToggleState(true, dontSendNotification);
// add DSP Offset Button
dspoffsetButton = new UtilityButton("DSP", Font("Very Small Text", 13, Font::plain));
dspoffsetButton->setRadius(3.0f); // sets the radius of the button's corners
dspoffsetButton->setBounds(80, 108,30,18); // sets the x position, y position, width, and height of the button
dspoffsetButton->addListener(this);
dspoffsetButton->setClickingTogglesState(true); // makes the button toggle its state when clicked
dspoffsetButton->setTooltip("Enable/disable DSP offset removal");
addAndMakeVisible(dspoffsetButton); // makes the button a child component of the editor and makes it visible
dspoffsetButton->setToggleState(true, dontSendNotification);
// add DSP Frequency Selection field
dspInterface = new DSPInterface(board, this);
addAndMakeVisible(dspInterface);
dspInterface->setBounds(110, 108, 30, 50);
ttlSettleLabel = new Label("TTL Settle","TTL Settle");
ttlSettleLabel->setFont(Font("Small Text", 11, Font::plain));
ttlSettleLabel->setBounds(255,80,100,20);
ttlSettleLabel->setColour(Label::textColourId, Colours::darkgrey);
addAndMakeVisible(ttlSettleLabel);
ttlSettleCombo = new ComboBox("FastSettleComboBox");
ttlSettleCombo->setBounds(260,100,60,18);
ttlSettleCombo->addListener(this);
ttlSettleCombo->addItem("-",1);
for (int k=0; k<8; k++)
{
ttlSettleCombo->addItem("TTL"+String(1+k),2+k);
}
ttlSettleCombo->setSelectedId(1, sendNotification);
addAndMakeVisible(ttlSettleCombo);
dacTTLButton = new UtilityButton("DAC TTL", Font("Small Text", 13, Font::plain));
dacTTLButton->setRadius(3.0f);
dacTTLButton->setBounds(260,25,65,18);
dacTTLButton->addListener(this);
dacTTLButton->setClickingTogglesState(true);
dacTTLButton->setTooltip("Enable/disable DAC Threshold TTL Output");
addAndMakeVisible(dacTTLButton);
dacHPFlabel = new Label("DAC HPF","DAC HPF");
dacHPFlabel->setFont(Font("Small Text", 11, Font::plain));
dacHPFlabel->setBounds(260,42,100,20);
dacHPFlabel->setColour(Label::textColourId, Colours::darkgrey);
addAndMakeVisible(dacHPFlabel);
dacHPFcombo = new ComboBox("dacHPFCombo");
dacHPFcombo->setBounds(260,60,60,18);
dacHPFcombo->addListener(this);
dacHPFcombo->addItem("OFF",1);
int HPFvalues[10] = {50,100,200,300,400,500,600,700,800,900};
for (int k=0; k<10; k++)
{
dacHPFcombo->addItem(String(HPFvalues[k])+" Hz",2+k);
}
dacHPFcombo->setSelectedId(1, sendNotification);
addAndMakeVisible(dacHPFcombo);
}
