示例#1
0
void
APZCCallbackHelper::UpdateRootFrame(nsIDOMWindowUtils* aUtils,
                                    FrameMetrics& aMetrics)
{
    // Precondition checks
    MOZ_ASSERT(aUtils);
    if (aMetrics.mScrollId == FrameMetrics::NULL_SCROLL_ID) {
        return;
    }

    // Set the scroll port size, which determines the scroll range. For example if
    // a 500-pixel document is shown in a 100-pixel frame, the scroll port length would
    // be 100, and gecko would limit the maximum scroll offset to 400 (so as to prevent
    // overscroll). Note that if the content here was zoomed to 2x, the document would
    // be 1000 pixels long but the frame would still be 100 pixels, and so the maximum
    // scroll range would be 900. Therefore this calculation depends on the zoom applied
    // to the content relative to the container.
    CSSSize scrollPort = aMetrics.CalculateCompositedRectInCssPixels().Size();
    aUtils->SetScrollPositionClampingScrollPortSize(scrollPort.width, scrollPort.height);

    // Scroll the window to the desired spot
    nsIScrollableFrame* sf = nsLayoutUtils::FindScrollableFrameFor(aMetrics.mScrollId);
    CSSPoint actualScrollOffset = ScrollFrameTo(sf, aMetrics.mScrollOffset);

    // Correct the display port due to the difference between mScrollOffset and the
    // actual scroll offset, possibly align it to tile boundaries (if tiled layers are
    // enabled), and clamp it to the scrollable rect.
    MaybeAlignAndClampDisplayPort(aMetrics, actualScrollOffset);
    aMetrics.mScrollOffset = actualScrollOffset;

    // The mZoom variable on the frame metrics stores the CSS-to-screen scale for this
    // frame. This scale includes all of the (cumulative) resolutions set on the presShells
    // from the root down to this frame. However, when setting the resolution, we only
    // want the piece of the resolution that corresponds to this presShell, rather than
    // all of the cumulative stuff, so we need to divide out the parent resolutions.
    // Finally, we multiply by a ScreenToLayerScale of 1.0f because the goal here is to
    // take the async zoom calculated by the APZC and tell gecko about it (turning it into
    // a "sync" zoom) which will update the resolution at which the layer is painted.
    mozilla::layers::ParentLayerToLayerScale presShellResolution =
        aMetrics.mZoom
        / aMetrics.mDevPixelsPerCSSPixel
        / aMetrics.GetParentResolution()
        * ScreenToLayerScale(1.0f);
    aUtils->SetResolution(presShellResolution.scale, presShellResolution.scale);

    // Finally, we set the displayport.
    nsCOMPtr<nsIContent> content = nsLayoutUtils::FindContentFor(aMetrics.mScrollId);
    if (!content) {
        return;
    }
    nsCOMPtr<nsIDOMElement> element = do_QueryInterface(content);
    if (!element) {
        return;
    }
    aUtils->SetDisplayPortForElement(aMetrics.mDisplayPort.x,
                                     aMetrics.mDisplayPort.y,
                                     aMetrics.mDisplayPort.width,
                                     aMetrics.mDisplayPort.height,
                                     element);
}
示例#2
0
static void
SetDisplayPortMargins(nsIDOMWindowUtils* aUtils,
                      nsIContent* aContent,
                      FrameMetrics& aMetrics)
{
  if (!aContent) {
    return;
  }
  nsCOMPtr<nsIDOMElement> element = do_QueryInterface(aContent);
  if (!element) {
    return;
  }

  ScreenMargin margins = aMetrics.GetDisplayPortMargins();
  aUtils->SetDisplayPortMarginsForElement(margins.left,
                                          margins.top,
                                          margins.right,
                                          margins.bottom,
                                          element, 0);
  CSSRect baseCSS = aMetrics.CalculateCompositedRectInCssPixels();
  nsRect base(0, 0,
              baseCSS.width * nsPresContext::AppUnitsPerCSSPixel(),
              baseCSS.height * nsPresContext::AppUnitsPerCSSPixel());
  nsLayoutUtils::SetDisplayPortBaseIfNotSet(aContent, base);
}
示例#3
0
void
APZCCallbackHelper::UpdateSubFrame(nsIContent* aContent,
                                   FrameMetrics& aMetrics)
{
    // Precondition checks
    MOZ_ASSERT(aContent);
    MOZ_ASSERT(aMetrics.GetUseDisplayPortMargins());
    if (aMetrics.GetScrollId() == FrameMetrics::NULL_SCROLL_ID) {
        return;
    }

    nsCOMPtr<nsIDOMWindowUtils> utils = GetDOMWindowUtils(aContent);
    if (!utils) {
        return;
    }

    // We currently do not support zooming arbitrary subframes. They can only
    // be scrolled, so here we only have to set the scroll position and displayport.

    nsIScrollableFrame* sf = nsLayoutUtils::FindScrollableFrameFor(aMetrics.GetScrollId());
    bool scrollUpdated = false;
    CSSPoint actualScrollOffset = ScrollFrameTo(sf, aMetrics.GetScrollOffset(), scrollUpdated);

    nsCOMPtr<nsIDOMElement> element = do_QueryInterface(aContent);
    if (element) {
        if (scrollUpdated) {
            AdjustDisplayPortForScrollDelta(aMetrics, actualScrollOffset);
        } else {
            RecenterDisplayPort(aMetrics);
        }
        gfx::IntSize alignment = gfxPrefs::LayersTilesEnabled()
            ? gfx::IntSize(gfxPrefs::LayersTileWidth(), gfxPrefs::LayersTileHeight()) :
              gfx::IntSize(0, 0);
        LayerMargin margins = aMetrics.GetDisplayPortMargins();
        utils->SetDisplayPortMarginsForElement(margins.left,
                                               margins.top,
                                               margins.right,
                                               margins.bottom,
                                               alignment.width,
                                               alignment.height,
                                               element, 0);
        CSSRect baseCSS = aMetrics.CalculateCompositedRectInCssPixels();
        nsRect base(baseCSS.x * nsPresContext::AppUnitsPerCSSPixel(),
                    baseCSS.y * nsPresContext::AppUnitsPerCSSPixel(),
                    baseCSS.width * nsPresContext::AppUnitsPerCSSPixel(),
                    baseCSS.height * nsPresContext::AppUnitsPerCSSPixel());
        nsLayoutUtils::SetDisplayPortBaseIfNotSet(aContent, base);
    }

    aMetrics.SetScrollOffset(actualScrollOffset);
}
static void
SetDisplayPortMargins(nsIPresShell* aPresShell,
                      nsIContent* aContent,
                      const FrameMetrics& aMetrics)
{
  if (!aContent) {
    return;
  }

  ScreenMargin margins = aMetrics.GetDisplayPortMargins();
  nsLayoutUtils::SetDisplayPortMargins(aContent, aPresShell, margins, 0);
  CSSRect baseCSS = aMetrics.CalculateCompositedRectInCssPixels();
  nsRect base(0, 0,
              baseCSS.width * nsPresContext::AppUnitsPerCSSPixel(),
              baseCSS.height * nsPresContext::AppUnitsPerCSSPixel());
  nsLayoutUtils::SetDisplayPortBaseIfNotSet(aContent, base);
}
static void
SetDisplayPortMargins(nsIPresShell* aPresShell,
                      nsIContent* aContent,
                      const FrameMetrics& aMetrics)
{
  if (!aContent) {
    return;
  }

  bool hadDisplayPort = nsLayoutUtils::HasDisplayPort(aContent);
  ScreenMargin margins = aMetrics.GetDisplayPortMargins();
  nsLayoutUtils::SetDisplayPortMargins(aContent, aPresShell, margins, 0);
  if (!hadDisplayPort) {
    nsLayoutUtils::SetZeroMarginDisplayPortOnAsyncScrollableAncestors(
        aContent->GetPrimaryFrame(), nsLayoutUtils::RepaintMode::Repaint);
  }

  CSSRect baseCSS = aMetrics.CalculateCompositedRectInCssPixels();
  nsRect base(0, 0,
              baseCSS.width * nsPresContext::AppUnitsPerCSSPixel(),
              baseCSS.height * nsPresContext::AppUnitsPerCSSPixel());
  nsLayoutUtils::SetDisplayPortBaseIfNotSet(aContent, base);
}
示例#6
0
void
APZCCallbackHelper::UpdateRootFrame(nsIDOMWindowUtils* aUtils,
                                    FrameMetrics& aMetrics)
{
    // Precondition checks
    MOZ_ASSERT(aUtils);
    MOZ_ASSERT(aMetrics.GetUseDisplayPortMargins());
    if (aMetrics.GetScrollId() == FrameMetrics::NULL_SCROLL_ID) {
        return;
    }

    // Set the scroll port size, which determines the scroll range. For example if
    // a 500-pixel document is shown in a 100-pixel frame, the scroll port length would
    // be 100, and gecko would limit the maximum scroll offset to 400 (so as to prevent
    // overscroll). Note that if the content here was zoomed to 2x, the document would
    // be 1000 pixels long but the frame would still be 100 pixels, and so the maximum
    // scroll range would be 900. Therefore this calculation depends on the zoom applied
    // to the content relative to the container.
    CSSSize scrollPort = aMetrics.CalculateCompositedSizeInCssPixels();
    aUtils->SetScrollPositionClampingScrollPortSize(scrollPort.width, scrollPort.height);

    // Scroll the window to the desired spot
    nsIScrollableFrame* sf = nsLayoutUtils::FindScrollableFrameFor(aMetrics.GetScrollId());
    bool scrollUpdated = false;
    CSSPoint actualScrollOffset = ScrollFrameTo(sf, aMetrics.GetScrollOffset(), scrollUpdated);

    if (scrollUpdated) {
        // Correct the display port due to the difference between mScrollOffset and the
        // actual scroll offset.
        AdjustDisplayPortForScrollDelta(aMetrics, actualScrollOffset);
    } else {
        // For whatever reason we couldn't update the scroll offset on the scroll frame,
        // which means the data APZ used for its displayport calculation is stale. Fall
        // back to a sane default behaviour. Note that we don't tile-align the recentered
        // displayport because tile-alignment depends on the scroll position, and the
        // scroll position here is out of our control. See bug 966507 comment 21 for a
        // more detailed explanation.
        RecenterDisplayPort(aMetrics);
    }

    aMetrics.SetScrollOffset(actualScrollOffset);

    // The mZoom variable on the frame metrics stores the CSS-to-screen scale for this
    // frame. This scale includes all of the (cumulative) resolutions set on the presShells
    // from the root down to this frame. However, when setting the resolution, we only
    // want the piece of the resolution that corresponds to this presShell, rather than
    // all of the cumulative stuff, so we need to divide out the parent resolutions.
    // Finally, we multiply by a ScreenToLayerScale of 1.0f because the goal here is to
    // take the async zoom calculated by the APZC and tell gecko about it (turning it into
    // a "sync" zoom) which will update the resolution at which the layer is painted.
    ParentLayerToLayerScale presShellResolution =
        aMetrics.GetZoom()
        / aMetrics.mDevPixelsPerCSSPixel
        / aMetrics.GetParentResolution()
        * ScreenToLayerScale(1.0f);
    aUtils->SetResolution(presShellResolution.scale, presShellResolution.scale);

    // Finally, we set the displayport.
    nsCOMPtr<nsIContent> content = nsLayoutUtils::FindContentFor(aMetrics.GetScrollId());
    if (!content) {
        return;
    }
    nsCOMPtr<nsIDOMElement> element = do_QueryInterface(content);
    if (!element) {
        return;
    }

    gfx::IntSize alignment = gfxPrefs::LayersTilesEnabled()
        ? gfx::IntSize(gfxPrefs::LayersTileWidth(), gfxPrefs::LayersTileHeight()) :
          gfx::IntSize(0, 0);
    LayerMargin margins = aMetrics.GetDisplayPortMargins();
    aUtils->SetDisplayPortMarginsForElement(margins.left,
                                            margins.top,
                                            margins.right,
                                            margins.bottom,
                                            alignment.width,
                                            alignment.height,
                                            element, 0);
    CSSRect baseCSS = aMetrics.CalculateCompositedRectInCssPixels();
    nsRect base(baseCSS.x * nsPresContext::AppUnitsPerCSSPixel(),
                baseCSS.y * nsPresContext::AppUnitsPerCSSPixel(),
                baseCSS.width * nsPresContext::AppUnitsPerCSSPixel(),
                baseCSS.height * nsPresContext::AppUnitsPerCSSPixel());
    nsLayoutUtils::SetDisplayPortBaseIfNotSet(content, base);
}
void
APZCCallbackHelper::UpdateRootFrame(nsIDOMWindowUtils* aUtils,
                                    FrameMetrics& aMetrics)
{
    // Precondition checks
    MOZ_ASSERT(aUtils);
    MOZ_ASSERT(aMetrics.GetUseDisplayPortMargins());
    if (aMetrics.GetScrollId() == FrameMetrics::NULL_SCROLL_ID) {
        return;
    }

    // Set the scroll port size, which determines the scroll range. For example if
    // a 500-pixel document is shown in a 100-pixel frame, the scroll port length would
    // be 100, and gecko would limit the maximum scroll offset to 400 (so as to prevent
    // overscroll). Note that if the content here was zoomed to 2x, the document would
    // be 1000 pixels long but the frame would still be 100 pixels, and so the maximum
    // scroll range would be 900. Therefore this calculation depends on the zoom applied
    // to the content relative to the container.
    CSSSize scrollPort = aMetrics.CalculateCompositedSizeInCssPixels();
    aUtils->SetScrollPositionClampingScrollPortSize(scrollPort.width, scrollPort.height);

    // Scroll the window to the desired spot
    nsIScrollableFrame* sf = nsLayoutUtils::FindScrollableFrameFor(aMetrics.GetScrollId());
    bool scrollUpdated = false;
    CSSPoint actualScrollOffset = ScrollFrameTo(sf, aMetrics.GetScrollOffset(), scrollUpdated);

    if (scrollUpdated) {
        // Correct the display port due to the difference between mScrollOffset and the
        // actual scroll offset.
        AdjustDisplayPortForScrollDelta(aMetrics, actualScrollOffset);
    } else {
        // For whatever reason we couldn't update the scroll offset on the scroll frame,
        // which means the data APZ used for its displayport calculation is stale. Fall
        // back to a sane default behaviour. Note that we don't tile-align the recentered
        // displayport because tile-alignment depends on the scroll position, and the
        // scroll position here is out of our control. See bug 966507 comment 21 for a
        // more detailed explanation.
        RecenterDisplayPort(aMetrics);
    }

    aMetrics.SetScrollOffset(actualScrollOffset);

    // The pres shell resolution is updated by the the async zoom since the
    // last paint.
    float presShellResolution = aMetrics.GetPresShellResolution()
                              * aMetrics.GetAsyncZoom().scale;
    aUtils->SetResolutionAndScaleTo(presShellResolution, presShellResolution);

    // Finally, we set the displayport.
    nsCOMPtr<nsIContent> content = nsLayoutUtils::FindContentFor(aMetrics.GetScrollId());
    if (!content) {
        return;
    }
    nsCOMPtr<nsIDOMElement> element = do_QueryInterface(content);
    if (!element) {
        return;
    }

    ScreenMargin margins = aMetrics.GetDisplayPortMargins();
    aUtils->SetDisplayPortMarginsForElement(margins.left,
                                            margins.top,
                                            margins.right,
                                            margins.bottom,
                                            element, 0);
    CSSRect baseCSS = aMetrics.CalculateCompositedRectInCssPixels();
    nsRect base(0, 0,
                baseCSS.width * nsPresContext::AppUnitsPerCSSPixel(),
                baseCSS.height * nsPresContext::AppUnitsPerCSSPixel());
    nsLayoutUtils::SetDisplayPortBaseIfNotSet(content, base);
}
bool
SharedFrameMetricsHelper::AboutToCheckerboard(const FrameMetrics& aContentMetrics,
                                              const FrameMetrics& aCompositorMetrics)
{
  return !aContentMetrics.mDisplayPort.Contains(CSSRect(aCompositorMetrics.CalculateCompositedRectInCssPixels()) - aCompositorMetrics.GetScrollOffset());
}