// Open and display a previewer frame for printing
void DIALOG_PRINT_USING_PRINTER::OnPrintPreview( wxCommandEvent& event )
{
if( !PreparePrintPrms() )
return;
// Pass two printout objects: for preview, and possible printing.
wxString title = _( "Print Preview" );
wxPrintPreview* preview =
new wxPrintPreview( new BOARD_PRINTOUT_CONTROLLER( s_Parameters, m_Parent, title ),
new BOARD_PRINTOUT_CONTROLLER( s_Parameters, m_Parent, title ),
s_printData );
if( preview == NULL )
{
DisplayError( this, wxT( "OnPrintPreview() problem" ) );
return;
}
// Uses the parent position and size.
// @todo uses last position and size ans store them when exit in m_Config
wxPoint WPos = m_Parent->GetPosition();
wxSize WSize = m_Parent->GetSize();
wxPreviewFrame* frame = new wxPreviewFrame( preview, this, title, WPos, WSize );
frame->SetMinSize( wxSize( 550, 350 ) );
frame->Initialize();
frame->Raise(); // Needed on Ubuntu/Unity to display the frame
frame->Show( true );
}
/* MacOSX: Needed for file association
* http://wiki.wxwidgets.org/WxMac-specific_topics
*/
void EDA_APP::MacOpenFile( const wxString& aFileName )
{
wxFileName filename = aFileName;
GERBVIEW_FRAME * frame = ((GERBVIEW_FRAME*)GetTopWindow());
if( !filename.FileExists() )
return;
frame->LoadGerberFiles( aFileName );
}
bool GBR_TO_PCB_EXPORTER::ExportPcb( LAYER_NUM* LayerLookUpTable, int aCopperLayers )
{
m_fp = wxFopen( m_pcb_file_name, wxT( "wt" ) );
if( m_fp == NULL )
{
wxString msg;
msg.Printf( _( "Cannot create file <%s>" ), GetChars( m_pcb_file_name ) );
DisplayError( m_gerbview_frame, msg );
return false;
}
m_pcbCopperLayersCount = aCopperLayers;
writePcbHeader();
// create an image of gerber data
// First: non copper layers:
GERBER_DRAW_ITEM* gerb_item = m_gerbview_frame->GetItemsList();
for( ; gerb_item; gerb_item = gerb_item->Next() )
{
LAYER_NUM layer = gerb_item->GetLayer();
LAYER_NUM pcb_layer_number = LayerLookUpTable[layer];
if( !IsPcbLayer( pcb_layer_number ) )
continue;
if( pcb_layer_number > LAST_COPPER_LAYER )
export_non_copper_item( gerb_item, pcb_layer_number );
}
// Copper layers
fprintf( m_fp, "$TRACK\n" );
gerb_item = m_gerbview_frame->GetItemsList();
for( ; gerb_item; gerb_item = gerb_item->Next() )
{
LAYER_NUM layer = gerb_item->GetLayer();
LAYER_NUM pcb_layer_number = LayerLookUpTable[layer];
if( pcb_layer_number < 0 || pcb_layer_number > LAST_COPPER_LAYER )
continue;
else
export_copper_item( gerb_item, pcb_layer_number );
}
fprintf( m_fp, "$EndTRACK\n" );
fprintf( m_fp, "$EndBOARD\n" );
fclose( m_fp );
m_fp = NULL;
return true;
}
void GERBVIEW_DRAW_PANEL_GAL::OnShow()
{
GERBVIEW_FRAME* frame = dynamic_cast<GERBVIEW_FRAME*>( GetParent() );
if( frame )
{
SetTopLayer( frame->GetActiveLayer() );
GBR_DISPLAY_OPTIONS* displ_opts = (GBR_DISPLAY_OPTIONS*) frame->GetDisplayOptions();
static_cast<KIGFX::GERBVIEW_RENDER_SETTINGS*>(
m_view->GetPainter()->GetSettings() )->LoadDisplayOptions( displ_opts );
}
m_view->RecacheAllItems();
}
void DIALOG_PRINT_USING_PRINTER::OnPrintPreview( wxCommandEvent& event )
/************************************************************/
/* Open and display a previewer frame for printing
*/
{
SetPrintParameters( );
// Pass two printout objects: for preview, and possible printing.
wxString title = _( "Print Preview" );
wxPrintPreview* preview =
new wxPrintPreview( new BOARD_PRINTOUT_CONTROLLER( s_Parameters, m_Parent, title ),
new BOARD_PRINTOUT_CONTROLLER( s_Parameters, m_Parent, title ),
g_PrintData );
if( preview == NULL )
{
DisplayError( this, wxT( "OnPrintPreview() problem" ) );
return;
}
SetLayerMaskFromListSelection();
// If no layer selected, we have no plot. prompt user if it happens
// because he could think there is a bug in Pcbnew:
if( s_Parameters.m_PrintMaskLayer == 0 )
{
DisplayError( this, _( "No layer selected" ) );
return;
}
// Uses the parent position and size.
// @todo uses last position and size ans store them when exit in m_Config
wxPoint WPos = m_Parent->GetPosition();
wxSize WSize = m_Parent->GetSize();
wxPreviewFrame* frame = new wxPreviewFrame( preview, this, title, WPos, WSize );
frame->Initialize();
frame->Show( true );
}
bool DIALOG_PRINT_USING_PRINTER::PreparePrintPrms()
{
SetPrintParameters();
// If no layer selected, we have no plot. prompt user if it happens
// because he could think there is a bug in Pcbnew:
if( m_Parent->GetGerberLayout()->GetPrintableLayers().size() == 0 )
{
DisplayError( this, _( "No layer selected" ) );
return false;
}
return true;
}
int DIALOG_PRINT_USING_PRINTER::SetLayerSetFromListSelection()
{
std::vector<int> layerList;
for( int ii = 0; ii < GERBER_DRAWLAYERS_COUNT; ++ii )
{
if( m_BoxSelectLayer[ii]->IsChecked() && m_BoxSelectLayer[ii]->IsEnabled() )
layerList.push_back( ii );
}
m_Parent->GetGerberLayout()->SetPrintableLayers( layerList );
s_Parameters.m_PageCount = layerList.size();
return s_Parameters.m_PageCount;
}
void DIALOG_DISPLAY_OPTIONS::OnOKBUttonClick( wxCommandEvent& event )
{
m_Parent->m_DisplayOptions.m_DisplayPolarCood =
(m_PolarDisplay->GetSelection() == 0) ? false : true;
g_UserUnit = (m_BoxUnits->GetSelection() == 0) ? INCHES : MILLIMETRES;
m_Parent->SetCursorShape( m_CursorShape->GetSelection() );
if( m_OptDisplayLines->GetSelection() == 1 )
m_Parent->m_DisplayOptions.m_DisplayLinesFill = true;
else
m_Parent->m_DisplayOptions.m_DisplayLinesFill = false;
if( m_OptDisplayFlashedItems->GetSelection() == 1 )
{
m_Parent->m_DisplayOptions.m_DisplayFlashedItemsFill = true;
}
else
{
m_Parent->m_DisplayOptions.m_DisplayFlashedItemsFill = false;
}
if( m_OptDisplayPolygons->GetSelection() == 0 )
m_Parent->m_DisplayOptions.m_DisplayPolygonsFill = false;
else
m_Parent->m_DisplayOptions.m_DisplayPolygonsFill = true;
m_Parent->SetElementVisibility( DCODES_VISIBLE, m_OptDisplayDCodes->GetValue() );
int idx = m_ShowPageLimits->GetSelection();
m_Parent->SetShowBorderAndTitleBlock( idx > 0 ? true : false );
PAGE_INFO pageInfo( g_GerberPageSizeList[idx] );
m_Parent->SetPageSettings( pageInfo );
m_Parent->GetCanvas()->SetEnableZoomNoCenter( m_OptZoomNoCenter->GetValue() );
m_Parent->GetCanvas()->SetEnableMiddleButtonPan( m_OptMiddleButtonPan->GetValue() );
m_Parent->GetCanvas()->SetMiddleButtonPanLimited( m_OptMiddleButtonPanLimited->GetValue() );
m_Parent->GetCanvas()->Refresh();
EndModal( 1 );
}
void DIALOG_DISPLAY_OPTIONS::initOptDialog( )
{
m_PolarDisplay->SetSelection( m_Parent->m_DisplayOptions.m_DisplayPolarCood ? 1 : 0 );
m_BoxUnits->SetSelection( g_UserUnit ? 1 : 0 );
m_CursorShape->SetSelection( m_Parent->GetCursorShape() ? 1 : 0 );
// Show Option Draw Lines. We use DisplayPcbTrackFill as Lines draw option
m_OptDisplayLines->SetSelection( m_Parent->m_DisplayOptions.m_DisplayLinesFill ? 1 : 0 );
m_OptDisplayFlashedItems->SetSelection( m_Parent->m_DisplayOptions.m_DisplayFlashedItemsFill ? 1 : 0);
// Show Option Draw polygons
m_OptDisplayPolygons->SetSelection( m_Parent->m_DisplayOptions.m_DisplayPolygonsFill ? 1 : 0 );
m_ShowPageLimits->SetSelection(0);
if( m_Parent->GetShowBorderAndTitleBlock() )
{
wxString curPaperType = m_Parent->GetPageSettings().GetType();
for( unsigned i = 1; i < DIM( g_GerberPageSizeList ); ++i )
{
if( g_GerberPageSizeList[i] == curPaperType )
{
m_ShowPageLimits->SetSelection( i );
break;
}
}
}
m_OptDisplayDCodes->SetValue( m_Parent->IsElementVisible( DCODES_VISIBLE ) );
m_OptZoomNoCenter->SetValue( m_Parent->GetCanvas()->GetEnableZoomNoCenter() );
m_OptMiddleButtonPan->SetValue( m_Parent->GetCanvas()->GetEnableMiddleButtonPan() );
m_OptMiddleButtonPanLimited->SetValue( m_Parent->GetCanvas()->GetMiddleButtonPanLimited() );
m_OptMiddleButtonPanLimited->Enable( m_OptMiddleButtonPan->GetValue() );
}
void DIALOG_PRINT_USING_PRINTER::InitValues( )
{
SetFocus();
wxString msg;
if( s_pageSetupData == NULL )
{
s_pageSetupData = new wxPageSetupDialogData;
// Set initial page margins.
// Margins are already set in Gerbview, so we can use 0
s_pageSetupData->SetMarginTopLeft( wxPoint( 0, 0 ) );
s_pageSetupData->SetMarginBottomRight( wxPoint( 0, 0 ) );
}
s_Parameters.m_PageSetupData = s_pageSetupData;
GERBER_FILE_IMAGE_LIST* images = m_Parent->GetGerberLayout()->GetImagesList();
// Create layer list
for( unsigned ii = 0; ii < images->ImagesMaxCount(); ++ii )
{
msg = _( "Layer" );
msg << wxT( " " ) << ii + 1;
wxStaticBoxSizer* boxSizer = ( ii < 16 ) ? m_leftLayersBoxSizer
: m_rightLayersBoxSizer;
m_BoxSelectLayer[ii] = new wxCheckBox( boxSizer->GetStaticBox(),
wxID_ANY, msg );
boxSizer->Add( m_BoxSelectLayer[ii], wxGROW | wxLEFT | wxRIGHT | wxTOP );
if( images->GetGbrImage( ii ) == NULL ) // Nothing loaded on this draw layer
m_BoxSelectLayer[ii]->Enable( false );
}
// Read the scale adjust option
int scale_idx = 4; // default selected scale = ScaleList[4] = 1.000
if( m_Config )
{
m_Config->Read( OPTKEY_PRINT_X_FINESCALE_ADJ, &s_Parameters.m_XScaleAdjust );
m_Config->Read( OPTKEY_PRINT_Y_FINESCALE_ADJ, &s_Parameters.m_YScaleAdjust );
m_Config->Read( OPTKEY_PRINT_SCALE, &scale_idx );
m_Config->Read( OPTKEY_PRINT_PAGE_FRAME, &s_Parameters.m_Print_Sheet_Ref, 1 );
m_Config->Read( OPTKEY_PRINT_MONOCHROME_MODE, &s_Parameters.m_Print_Black_and_White, 1 );
// Test for a reasonnable scale value. Set to 1 if problem
if( s_Parameters.m_XScaleAdjust < MIN_SCALE ||
s_Parameters.m_YScaleAdjust < MIN_SCALE ||
s_Parameters.m_XScaleAdjust > MAX_SCALE ||
s_Parameters.m_YScaleAdjust > MAX_SCALE )
s_Parameters.m_XScaleAdjust = s_Parameters.m_YScaleAdjust = 1.0;
for( int layer = 0; layer < GERBER_DRAWLAYERS_COUNT; ++layer )
{
wxString layerKey;
bool option;
layerKey.Printf( OPTKEY_LAYERBASE, layer );
m_Config->Read( layerKey, &option, false );
m_BoxSelectLayer[layer]->SetValue( option );
}
}
m_ScaleOption->SetSelection( scale_idx );
scale_idx = m_ScaleOption->GetSelection();
s_Parameters.m_PrintScale = s_ScaleList[scale_idx];
m_Print_Mirror->SetValue( s_Parameters.m_PrintMirror );
if( s_Parameters.m_Print_Black_and_White )
m_ModeColorOption->SetSelection( 1 );
else
m_ModeColorOption->SetSelection( 0 );
s_Parameters.m_PenDefaultSize = 0;
// Create scale adjust option
msg.Printf( wxT( "%f" ), s_Parameters.m_XScaleAdjust );
m_FineAdjustXscaleOpt->SetValue( msg );
msg.Printf( wxT( "%f" ), s_Parameters.m_YScaleAdjust );
m_FineAdjustYscaleOpt->SetValue( msg );
bool enable = (s_Parameters.m_PrintScale == 1.0);
m_FineAdjustXscaleOpt->Enable(enable);
m_FineAdjustYscaleOpt->Enable(enable);
}
// Returns a color index from the layer id
EDA_COLOR_T GBR_LAYER_BOX_SELECTOR::GetLayerColor( int aLayer ) const
{
GERBVIEW_FRAME* frame = (GERBVIEW_FRAME*) GetParent()->GetParent();
return frame->GetLayerColor( aLayer );
}
// Returns a color index from the layer id
COLOR4D GBR_LAYER_BOX_SELECTOR::GetLayerColor( int aLayer ) const
{
GERBVIEW_FRAME* frame = (GERBVIEW_FRAME*) GetParent()->GetParent();
return frame->GetLayerColor( GERBER_DRAW_LAYER( aLayer ) );
}
void GERBER_DRAW_ITEM::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
// used when a D_CODE is not found. default D_CODE to draw a flashed item
static D_CODE dummyD_CODE( 0 );
EDA_COLOR_T color, alt_color;
bool isFilled;
int radius;
int halfPenWidth;
static bool show_err;
D_CODE* d_codeDescr = GetDcodeDescr();
GERBVIEW_FRAME* gerbFrame = (GERBVIEW_FRAME*) aPanel->GetParent();
if( d_codeDescr == NULL )
d_codeDescr = &dummyD_CODE;
if( gerbFrame->IsLayerVisible( GetLayer() ) == false )
return;
color = gerbFrame->GetLayerColor( GetLayer() );
if( aDrawMode & GR_HIGHLIGHT )
ColorChangeHighlightFlag( &color, !(aDrawMode & GR_AND) );
ColorApplyHighlightFlag( &color );
alt_color = gerbFrame->GetNegativeItemsColor();
/* isDark is true if flash is positive and should use a drawing
* color other than the background color, else use the background color
* when drawing so that an erasure happens.
*/
bool isDark = !(m_LayerNegative ^ m_imageParams->m_ImageNegative);
if( !isDark )
{
// draw in background color ("negative" color)
EXCHG( color, alt_color );
}
GRSetDrawMode( aDC, aDrawMode );
isFilled = gerbFrame->DisplayLinesSolidMode();
switch( m_Shape )
{
case GBR_POLYGON:
isFilled = gerbFrame->DisplayPolygonsSolidMode();
if( !isDark )
isFilled = true;
DrawGbrPoly( aPanel->GetClipBox(), aDC, color, aOffset, isFilled );
break;
case GBR_CIRCLE:
radius = KiROUND( GetLineLength( m_Start, m_End ) );
halfPenWidth = m_Size.x >> 1;
if( !isFilled )
{
// draw the border of the pen's path using two circles, each as narrow as possible
GRCircle( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
radius - halfPenWidth, 0, color );
GRCircle( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
radius + halfPenWidth, 0, color );
}
else // Filled mode
{
GRCircle( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
radius, m_Size.x, color );
}
break;
case GBR_ARC:
// Currently, arcs plotted with a rectangular aperture are not supported.
// a round pen only is expected.
#if 0 // for arc debug only
GRLine( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
GetABPosition( m_ArcCentre ), 0, color );
GRLine( aPanel->GetClipBox(), aDC, GetABPosition( m_End ),
GetABPosition( m_ArcCentre ), 0, color );
#endif
if( !isFilled )
{
GRArc1( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
GetABPosition( m_End ), GetABPosition( m_ArcCentre ),
0, color );
}
else
{
GRArc1( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
GetABPosition( m_End ), GetABPosition( m_ArcCentre ),
m_Size.x, color );
}
break;
case GBR_SPOT_CIRCLE:
case GBR_SPOT_RECT:
case GBR_SPOT_OVAL:
case GBR_SPOT_POLY:
case GBR_SPOT_MACRO:
isFilled = gerbFrame->DisplayFlashedItemsSolidMode();
d_codeDescr->DrawFlashedShape( this, aPanel->GetClipBox(), aDC, color, alt_color,
m_Start, isFilled );
break;
case GBR_SEGMENT:
/* Plot a line from m_Start to m_End.
* Usually, a round pen is used, but some gerber files use a rectangular pen
* In fact, any aperture can be used to plot a line.
* currently: only a square pen is handled (I believe using a polygon gives a strange plot).
*/
if( d_codeDescr->m_Shape == APT_RECT )
{
if( m_PolyCorners.size() == 0 )
ConvertSegmentToPolygon( );
DrawGbrPoly( aPanel->GetClipBox(), aDC, color, aOffset, isFilled );
}
else
{
if( !isFilled )
{
GRCSegm( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
GetABPosition( m_End ), m_Size.x, color );
}
else
{
GRFilledSegment( aPanel->GetClipBox(), aDC, GetABPosition( m_Start ),
GetABPosition( m_End ), m_Size.x, color );
}
}
break;
default:
if( !show_err )
{
wxMessageBox( wxT( "Trace_Segment() type error" ) );
show_err = true;
}
break;
}
}
bool EDA_APP::OnInit()
{
wxFileName fn;
GERBVIEW_FRAME* frame = NULL;
InitEDA_Appl( wxT( "GerbView" ), APP_GERBVIEW_T );
if( m_Checker && m_Checker->IsAnotherRunning() )
{
if( !IsOK( NULL, _( "GerbView is already running. Continue?" ) ) )
return false;
}
// read current setup and reopen last directory if no filename to open in
// command line
bool reopenLastUsedDirectory = argc == 1;
GetSettings( reopenLastUsedDirectory );
g_DrawBgColor = BLACK;
/* Must be called before creating the main frame in order to
* display the real hotkeys in menus or tool tips */
ReadHotkeyConfig( wxT("GerberFrame"), s_Gerbview_Hokeys_Descr );
frame = new GERBVIEW_FRAME( NULL, wxT( "GerbView" ), wxPoint( 0, 0 ), wxSize( 600, 400 ) );
/* Gerbview mainframe title */
frame->SetTitle( GetTitle() + wxT( " " ) + GetBuildVersion() );
SetTopWindow( frame ); // Set GerbView mainframe on top
frame->Show( true ); // Show GerbView mainframe
frame->Zoom_Automatique( true ); // Zoom fit in frame
frame->GetScreen()->m_FirstRedraw = false;
if( argc <= 1 )
return true;
fn = argv[1];
if( fn.IsOk() )
{
if( fn.DirExists() )
wxSetWorkingDirectory( fn.GetPath() );
// Load all files specified on the command line.
LAYER_NUM jj = FIRST_LAYER;
for( LAYER_NUM ii = LAYER_N_2; ii < argc && ii <= NB_GERBER_LAYERS; ++ii )
{
fn = wxFileName( argv[ii] );
if( fn.FileExists() )
{
frame->setActiveLayer( jj );
++jj;
frame->LoadGerberFiles( fn.GetFullPath() );
}
}
}
return true;
}
