/****************************************************************************
Desc: Returns disk space usage for the database
****************************************************************************/
RCODE XFLAPI F_Db::getDiskSpaceUsage(
FLMUINT64 * pui64DataSize,
FLMUINT64 * pui64RollbackSize,
FLMUINT64 * pui64RflSize)
{
RCODE rc = NE_XFLM_OK;
FLMBOOL bStartedTrans = FALSE;
FLMUINT uiEndAddress;
FLMUINT uiLastFileNumber;
FLMUINT64 ui64LastFileSize;
char szTmpName [F_PATH_MAX_SIZE];
char szRflDir [F_PATH_MAX_SIZE];
IF_FileHdl * pFileHdl = NULL;
IF_DirHdl * pDirHdl = NULL;
if (m_eTransType == XFLM_READ_TRANS)
{
rc = RC_SET( NE_XFLM_ILLEGAL_TRANS_OP);
goto Exit;
}
else if (m_eTransType != XFLM_NO_TRANS)
{
if (!okToCommitTrans())
{
rc = RC_SET( NE_XFLM_ABORT_TRANS);
goto Exit;
}
}
else
{
if (RC_BAD( rc = beginTrans( XFLM_UPDATE_TRANS)))
{
goto Exit;
}
bStartedTrans = TRUE;
}
// See if they want the database files sizes.
if (pui64DataSize)
{
uiEndAddress = m_uiLogicalEOF;
uiLastFileNumber = FSGetFileNumber( uiEndAddress);
// Last file number better be in the proper range.
flmAssert( uiLastFileNumber >= 1 &&
uiLastFileNumber <= MAX_DATA_BLOCK_FILE_NUMBER);
// Get the actual size of the last file.
if (RC_BAD( rc = m_pSFileHdl->getFileSize( uiLastFileNumber,
&ui64LastFileSize)))
{
if (rc == NE_FLM_IO_PATH_NOT_FOUND ||
rc == NE_FLM_IO_INVALID_FILENAME)
{
if (uiLastFileNumber > 1)
{
rc = NE_XFLM_OK;
ui64LastFileSize = 0;
}
else
{
// Should always be a data file #1
RC_UNEXPECTED_ASSERT( rc);
goto Exit;
}
}
else
{
goto Exit;
}
}
// One of two situations exists with respect to the last
// file: 1) it has not been fully written out yet (blocks
// are still cached, or 2) it has been written out and
// extended beyond what the logical EOF shows. We want
// the larger of these two possibilities.
if (FSGetFileOffset( uiEndAddress) > ui64LastFileSize)
{
ui64LastFileSize = FSGetFileOffset( uiEndAddress);
}
if (uiLastFileNumber == 1)
{
// Only one file - use last file's size.
*pui64DataSize = ui64LastFileSize;
}
else
{
// Size is the sum of full size for all files except the last one,
// plus the calculated (or actual) size of the last one.
(*pui64DataSize) = (FLMUINT64)(uiLastFileNumber - 1) *
(FLMUINT64)m_pDatabase->m_uiMaxFileSize +
ui64LastFileSize;
}
}
// See if they want the rollback files sizes.
if (pui64RollbackSize)
{
uiEndAddress = (FLMUINT)m_pDatabase->m_uncommittedDbHdr.ui32RblEOF;
uiLastFileNumber = FSGetFileNumber( uiEndAddress);
// Last file number better be in the proper range.
flmAssert( !uiLastFileNumber ||
(uiLastFileNumber >=
FIRST_LOG_BLOCK_FILE_NUMBER &&
uiLastFileNumber <=
MAX_LOG_BLOCK_FILE_NUMBER));
// Get the size of the last file number.
if (RC_BAD( rc = m_pSFileHdl->getFileSize( uiLastFileNumber,
&ui64LastFileSize)))
{
if (rc == NE_FLM_IO_PATH_NOT_FOUND ||
rc == NE_FLM_IO_INVALID_FILENAME)
{
if (uiLastFileNumber)
{
rc = NE_XFLM_OK;
ui64LastFileSize = 0;
}
else
{
// Should always have rollback file #0
RC_UNEXPECTED_ASSERT( rc);
goto Exit;
}
}
else
{
goto Exit;
}
}
// If the EOF offset for the last file is greater than the
// actual file size, use it instead of the actual file size.
if (FSGetFileOffset( uiEndAddress) > ui64LastFileSize)
{
ui64LastFileSize = FSGetFileOffset( uiEndAddress);
}
// Special case handling here because rollback file numbers start with
// zero and then skip to a file number that is one beyond the
// highest data file number - so the calculation for file size needs
// to account for this.
if (!uiLastFileNumber)
{
*pui64RollbackSize = ui64LastFileSize;
}
else
{
FLMUINT uiFirstLogFileNum = FIRST_LOG_BLOCK_FILE_NUMBER;
// Add full size of file zero plus a full size for every file
// except the last one.
(*pui64RollbackSize) = (FLMUINT64)(uiLastFileNumber -
uiFirstLogFileNum + 1) *
(FLMUINT64)m_pDatabase->m_uiMaxFileSize +
ui64LastFileSize;
}
}
// See if they want the roll-forward log file sizes.
if (pui64RflSize)
{
char * pszDbFileName = m_pDatabase->m_pszDbPath;
*pui64RflSize = 0;
// Scan the RFL directory for
// RFL files. The call below to rflGetDirAndPrefix is done
// to get the prefix. It will not return the correct
// RFL directory name, because we are passing in a NULL
// RFL directory path (which may or may not be correct).
// That's OK, because we get the RFL directory directly
// from the F_Rfl object anyway.
if (RC_BAD( rc = rflGetDirAndPrefix( pszDbFileName,
NULL, szRflDir)))
{
goto Exit;
}
// We need to get the RFL directory from the F_Rfl object.
m_pDatabase->lockMutex();
f_strcpy( szRflDir, m_pDatabase->m_pRfl->getRflDirPtr());
m_pDatabase->unlockMutex();
// See if the directory exists. If not, we are done.
if (gv_XFlmSysData.pFileSystem->isDir( szRflDir))
{
// Open the directory and scan for RFL files.
if (RC_BAD( rc = gv_XFlmSysData.pFileSystem->openDir( szRflDir,
"*", &pDirHdl)))
{
goto Exit;
}
for (;;)
{
if (RC_BAD( rc = pDirHdl->next()))
{
if (rc == NE_FLM_IO_NO_MORE_FILES)
{
rc = NE_XFLM_OK;
break;
}
else
{
goto Exit;
}
}
pDirHdl->currentItemPath( szTmpName);
// If the item looks like an RFL file name, get
// its size.
if (!pDirHdl->currentItemIsDir() &&
rflGetFileNum( szTmpName, &uiLastFileNumber))
{
// Open the file and get its size.
if (RC_BAD( rc = gv_XFlmSysData.pFileSystem->openFile(
szTmpName, gv_XFlmSysData.uiFileOpenFlags, &pFileHdl)))
{
if (rc == NE_FLM_IO_PATH_NOT_FOUND ||
rc == NE_FLM_IO_INVALID_FILENAME)
{
rc = NE_XFLM_OK;
ui64LastFileSize = 0;
}
else
{
goto Exit;
}
}
else
{
if (RC_BAD( rc = pFileHdl->size( &ui64LastFileSize)))
{
goto Exit;
}
}
if (pFileHdl)
{
pFileHdl->Release();
pFileHdl = NULL;
}
(*pui64RflSize) += ui64LastFileSize;
}
}
}
}
Exit:
if (pFileHdl)
{
pFileHdl->Release();
}
if (pDirHdl)
{
pDirHdl->Release();
}
if (bStartedTrans)
{
abortTrans();
}
return( rc);
}
/****************************************************************************
Desc:
****************************************************************************/
RCODE createUnitTest(
const char * configPath,
const char * buildNum,
const char * environment,
const char * user,
unitTestData * uTD)
{
RCODE rc = FERR_OK;
IF_FileHdl * pConfigFileHdl = NULL;
IF_FileHdl * pCSVFileHdl = NULL;
FLMBYTE buffer[ MAX_BUFFER_SIZE] = "";
FLMUINT uiSize = MAX_BUFFER_SIZE;
FLMUINT64 ui64Tmp;
char * strPos1 = NULL;
char * strPos2 = NULL;
IF_FileSystem * pFileSystem = NULL;
if( !configPath || !buildNum || !environment || !uTD || !user)
{
flmAssert(0);
}
if( f_strlen(user) > MAX_SMALL_BUFFER_SIZE)
{
rc = RC_SET( FERR_CONV_DEST_OVERFLOW);
goto Exit;
}
else
{
f_strcpy( uTD->userName, user);
}
if( f_strlen(environment) > MAX_SMALL_BUFFER_SIZE)
{
rc = RC_SET( FERR_CONV_DEST_OVERFLOW);
goto Exit;
}
else
{
f_strcpy( uTD->environment, environment);
}
if( f_strlen( buildNum) > MAX_SMALL_BUFFER_SIZE)
{
rc = RC_SET( FERR_CONV_DEST_OVERFLOW);
goto Exit;
}
else
{
f_strcpy( uTD->buildNumber, buildNum);
}
if( RC_BAD( rc = FlmGetFileSystem( &pFileSystem)))
{
goto Exit;
}
if( configPath[ 0])
{
if( RC_BAD( rc = pFileSystem->openFile(
configPath, FLM_IO_RDONLY | FLM_IO_SH_DENYNONE, &pConfigFileHdl)))
{
goto Exit;
}
if( RC_BAD( rc = pConfigFileHdl->size( &ui64Tmp)))
{
goto Exit;
}
uiSize = (FLMUINT)ui64Tmp;
if( RC_BAD( rc = pConfigFileHdl->read( 0, uiSize, buffer, &uiSize)))
{
goto Exit;
}
#ifdef FLM_WIN
{
char szTemp[ MAX_BUFFER_SIZE];
char * pszTemp = szTemp;
FLMUINT uiNewSize = uiSize;
for( unsigned int i = 0; i < uiSize; i++)
{
if( ((i + 1) < uiSize)
&& (buffer[i] == 0x0D && buffer[ i + 1] == 0x0A))
{
*pszTemp++ = 0x0A;
i++;
uiNewSize--;
}
else
{
*pszTemp++ = buffer[ i];
}
}
f_memcpy( buffer, szTemp, uiNewSize);
uiSize = uiNewSize;
}
#endif
// Get the FOLDER
strPos1 = f_strchr( (const char *)buffer, ':');
strPos2 = f_strchr( (const char *)strPos1, '\n');
if( !strPos1 || !strPos2)
{
rc = RC_SET( FERR_FAILURE);
goto Exit;
}
for( strPos1++; *strPos1 == ' ' || *strPos1 == '\t'; strPos1++);
if( strPos2-strPos1 > MAX_SMALL_BUFFER_SIZE)
{
rc = RC_SET( FERR_CONV_DEST_OVERFLOW);
goto Exit;
}
f_strncpy( uTD->folder, strPos1, strPos2-strPos1);
uTD->folder[ strPos2 - strPos1] = '\0';
// Get the ATTRIBUTES
strPos1 = f_strchr( (const char *)strPos1, ':');
strPos2 = f_strchr( (const char *)strPos1, '\n');
if( !strPos1 || !strPos2)
{
rc = RC_SET( FERR_FAILURE);
goto Exit;
}
for( strPos1++;*strPos1 == ' ' || *strPos1 == '\t';strPos1++);
if( strPos2-strPos1 > MAX_SMALL_BUFFER_SIZE)
{
rc = RC_SET( FERR_FAILURE);
goto Exit;
}
f_strncpy( uTD->attrs, strPos1, strPos2-strPos1);
uTD->attrs[strPos2-strPos1] = '\0';
// Get the CSVFILE
strPos1 = f_strchr( (const char *)strPos1, ':');
strPos2 = f_strchr( (const char *)strPos1, '\n');
// Allow for possible \r
if( *( --strPos2) != '\r')
{
strPos2++;
}
if( !strPos1 || !strPos2)
{
rc = RC_SET( FERR_FAILURE);
goto Exit;
}
for( strPos1++;*strPos1 == ' ' || *strPos1 == '\t';strPos1++);
if( strPos2-strPos1 > MAX_SMALL_BUFFER_SIZE)
{
rc = RC_SET( FERR_FAILURE);
goto Exit;
}
f_strncpy( uTD->csvFilename, strPos1, strPos2-strPos1);
uTD->csvFilename[ strPos2 - strPos1] = '\0';
if( RC_BAD( rc = pFileSystem->openFile( uTD->csvFilename,
FLM_IO_RDWR | FLM_IO_SH_DENYNONE, &pCSVFileHdl)))
{
if ( rc == FERR_IO_PATH_NOT_FOUND)
{
// Create the file and write the header
if( RC_BAD( rc = f_filecat( uTD->csvFilename, DATA_ORDER)))
{
goto Exit;
}
}
}
else
{
goto Exit;
}
}
Exit:
if( pConfigFileHdl)
{
pConfigFileHdl->Release();
}
if( pCSVFileHdl)
{
pCSVFileHdl->Release();
}
if( pFileSystem)
{
pFileSystem->Release();
}
return( rc);
}
/****************************************************************************
Desc:
*****************************************************************************/
RCODE F_DynamicList::dumpToFile()
{
RCODE rc = NE_FLM_OK;
DLIST_NODE * pTmp;
FLMUINT uiLoop;
IF_FileHdl * pFileHdl = NULL;
#define DLST_RESP_SIZE 256
char szResponse[ DLST_RESP_SIZE];
FLMUINT uiTermChar;
FTX_SCREEN * pScreen;
IF_FileSystem * pFileSystem = NULL;
if( RC_BAD( rc = FlmGetFileSystem( &pFileSystem)))
{
goto Exit;
}
f_strcpy( szResponse, (const char *)DLIST_DUMPFILE_PATH);
FTXWinGetScreen( m_pListWin, &pScreen);
FTXGetInput(
pScreen,
"enter filename to dump to",
szResponse,
DLST_RESP_SIZE-1,
&uiTermChar);
if ( uiTermChar != FKB_ENTER)
{
goto Exit;
}
if (RC_BAD( rc = pFileSystem->doesFileExist( szResponse)))
{
//create file if it doesn't already exist
if ( rc == NE_FLM_IO_PATH_NOT_FOUND)
{
rc = pFileSystem->createFile( szResponse, FLM_IO_RDWR, &pFileHdl);
}
else
{
goto Exit_local;
}
}
else
{
rc = pFileSystem->openFile( szResponse, FLM_IO_RDWR, &pFileHdl);
}
TEST_RC_LOCAL( rc);
{
FLMUINT64 ui64FileSize = 0;
FLMUINT uiBytesWritten = 0;
//figure out size of file currently, so you can append to it
pFileHdl->size( &ui64FileSize);
pTmp = m_pFirst;
uiLoop = 0;
while( pTmp)
{
FLMBYTE * pszNextLine = (FLMBYTE*)(pTmp->pvData);
TEST_RC_LOCAL( rc = pFileHdl->write(
ui64FileSize, //offset to current file size
f_strlen( (const char *)pszNextLine),
pszNextLine,
&uiBytesWritten));
ui64FileSize += uiBytesWritten;
TEST_RC_LOCAL( rc = pFileHdl->write(
ui64FileSize, //add in newline
1,
(FLMBYTE*)"\n",
&uiBytesWritten));
ui64FileSize += uiBytesWritten;
pTmp = pTmp->pNext;
}
(void)pFileHdl->closeFile();
}
Exit_local:
{//give success/fail message
char szMessage[ 256];
FLMUINT uiChar;
FTXWinGetScreen( m_pListWin, &pScreen);
if ( RC_OK( rc))
{
f_sprintf( szMessage,
"contents of focused list appended to %s", DLIST_DUMPFILE_PATH);
}
else
{
f_sprintf( szMessage, "error rc=%u dumping to file %s",
(unsigned)rc, DLIST_DUMPFILE_PATH);
}
FTXDisplayMessage( pScreen, FLM_RED, FLM_WHITE, szMessage,
"press ESC or ENTER to close dialog", &uiChar);
}
Exit:
if (pFileHdl)
{
pFileHdl->Release();
pFileHdl = NULL;
}
if( pFileSystem)
{
pFileSystem->Release();
}
return rc;
}
/****************************************************************************
Desc: Copy a database's files, including roll-forward log files.
*****************************************************************************/
FSTATIC RCODE flmCopyDb(
FLMUINT uiDbVersion,
const char * pszSrcDbName,
const char * pszSrcDataDir,
const char * pszSrcRflDir,
const char * pszDestDbName,
const char * pszDestDataDir,
const char * pszDestRflDir,
STATUS_HOOK fnStatusCallback,
void * UserData)
{
RCODE rc = FERR_OK;
DB_COPY_INFO DbCopyInfo;
F_SuperFileHdl * pSrcSFileHdl = NULL;
F_SuperFileHdl * pDestSFileHdl = NULL;
F_SuperFileClient * pSrcSFileClient = NULL;
F_SuperFileClient * pDestSFileClient = NULL;
FLMUINT uiFileNumber;
FLMUINT uiHighFileNumber;
FLMUINT uiHighLogFileNumber;
FLMUINT64 ui64FileSize;
FFILE * pFile = NULL;
FLMBOOL bMutexLocked = FALSE;
IF_FileHdl * pLockFileHdl = NULL;
IF_FileHdl * pTmpFileHdl = NULL;
IF_DirHdl * pDirHdl = NULL;
FLMBOOL bFileLocked = FALSE;
FLMBOOL bWriteLocked = FALSE;
IF_LockObject * pWriteLockObj = NULL;
IF_LockObject * pFileLockObj = NULL;
COPIED_NAME * pCopiedList = NULL;
FLMBOOL bUsedFFile = FALSE;
FLMBYTE * pucInMemLogHdr = NULL;
eLockType currLockType;
FLMUINT uiLockThreadId;
char * pszActualSrcRflPath = NULL;
char * pszSrcPrefix = NULL;
char * pszActualDestRflPath = NULL;
char * pszDestPrefix = NULL;
FLMBOOL bCreatedDestRflDir = FALSE;
F_SEM hWaitSem = F_SEM_NULL;
f_memset( &DbCopyInfo, 0, sizeof( DbCopyInfo));
// Should not do anything if the source and destination names
// are the same.
if (f_stricmp( pszSrcDbName, pszDestDbName) == 0)
{
goto Exit;
}
// Allocate a semaphore
if( RC_BAD( rc = f_semCreate( &hWaitSem)))
{
goto Exit;
}
// Allocate memory for paths we don't want to push onto the stack.
if (RC_BAD( rc = f_calloc(
(F_PATH_MAX_SIZE + F_FILENAME_SIZE) * 2, &pszActualSrcRflPath)))
{
goto Exit;
}
pszSrcPrefix = &pszActualSrcRflPath[ F_PATH_MAX_SIZE];
pszActualDestRflPath = &pszSrcPrefix[ F_FILENAME_SIZE];
pszDestPrefix = &pszActualDestRflPath[ F_PATH_MAX_SIZE];
// Set up the super file object for the source database.
// Must at least open the control file.
if( (pSrcSFileClient = f_new F_SuperFileClient) == NULL)
{
rc = RC_SET( FERR_MEM);
goto Exit;
}
if( RC_BAD( rc = pSrcSFileClient->setup(
pszSrcDbName, pszSrcDataDir, uiDbVersion)))
{
goto Exit;
}
if( (pSrcSFileHdl = f_new F_SuperFileHdl) == NULL)
{
rc = RC_SET( FERR_MEM);
goto Exit;
}
if( RC_BAD( rc = pSrcSFileHdl->setup( pSrcSFileClient,
gv_FlmSysData.pFileHdlCache, gv_FlmSysData.uiFileOpenFlags, 0)))
{
goto Exit;
}
// Lock the destination database, if not already locked.
// This is so we can overwrite it without necessarily
// deleting it. May unlock and re-lock the global mutex.
f_mutexLock( gv_FlmSysData.hShareMutex);
bMutexLocked = TRUE;
if (RC_BAD( rc = flmFindFile( pszDestDbName, pszDestDataDir, &pFile)))
{
goto Exit;
}
// If we didn't find an FFILE structure, get an
// exclusive lock on the file.
if (!pFile)
{
f_mutexUnlock( gv_FlmSysData.hShareMutex);
bMutexLocked = FALSE;
// Attempt to get an exclusive lock on the file.
if (RC_BAD( rc = flmCreateLckFile( pszDestDbName, &pLockFileHdl)))
{
goto Exit;
}
}
else
{
// The call to flmVerifyFileUse will wait if the file is in
// the process of being opened by another thread.
if (RC_BAD( rc = flmVerifyFileUse( gv_FlmSysData.hShareMutex, &pFile)))
{
goto Exit;
}
// Increment the use count on the FFILE so it will not
// disappear while we are copying the file.
if (++pFile->uiUseCount == 1)
{
flmUnlinkFileFromNUList( pFile);
}
bUsedFFile = TRUE;
f_mutexUnlock( gv_FlmSysData.hShareMutex);
bMutexLocked = FALSE;
pucInMemLogHdr = &pFile->ucLastCommittedLogHdr [0];
// Lock the destination file object and transaction
// object, if not already locked.
pFile->pFileLockObj->getLockInfo( 0, &currLockType, &uiLockThreadId, NULL);
if (currLockType != FLM_LOCK_EXCLUSIVE || uiLockThreadId != f_threadId())
{
pFileLockObj = pFile->pFileLockObj;
pFileLockObj->AddRef();
if (RC_BAD( rc = pFileLockObj->lock( hWaitSem,
TRUE, FLM_NO_TIMEOUT, 0)))
{
goto Exit;
}
bFileLocked = TRUE;
}
// Lock the write object, if not already locked
pFile->pWriteLockObj->getLockInfo( 0, &currLockType, &uiLockThreadId, NULL);
if( currLockType != FLM_LOCK_EXCLUSIVE ||
uiLockThreadId != f_threadId())
{
pWriteLockObj = pFile->pWriteLockObj;
pWriteLockObj->AddRef();
// Only contention here is with the checkpoint thread - wait
// forever until the checkpoint thread gives it up.
if( RC_BAD( rc = pWriteLockObj->lock( hWaitSem,
TRUE, FLM_NO_TIMEOUT, 0)))
{
goto Exit;
}
bWriteLocked = TRUE;
}
}
// Set up the super file object for the destination database.
if( (pDestSFileClient = f_new F_SuperFileClient) == NULL)
{
rc = RC_SET( FERR_MEM);
goto Exit;
}
if( RC_BAD( rc = pDestSFileClient->setup(
pszDestDbName, pszDestDataDir, uiDbVersion)))
{
goto Exit;
}
if( (pDestSFileHdl = f_new F_SuperFileHdl) == NULL)
{
rc = RC_SET( FERR_MEM);
goto Exit;
}
if( RC_BAD( rc = pDestSFileHdl->setup( pDestSFileClient,
gv_FlmSysData.pFileHdlCache, gv_FlmSysData.uiFileOpenFlags,
gv_FlmSysData.uiFileCreateFlags)))
{
goto Exit;
}
// See how many files we have and calculate the total size.
uiHighFileNumber = 0;
for (;;)
{
if( RC_BAD( rc = pSrcSFileHdl->getFileSize(
uiHighFileNumber, &ui64FileSize)) || !ui64FileSize)
{
if (rc == FERR_IO_PATH_NOT_FOUND ||
rc == FERR_IO_INVALID_PATH ||
!ui64FileSize)
{
// If the control file doesn't exist, we will return
// path not found.
if (!uiHighFileNumber)
{
goto Exit;
}
uiHighFileNumber--;
rc = FERR_OK;
break;
}
goto Exit;
}
DbCopyInfo.ui64BytesToCopy += ui64FileSize;
if (uiHighFileNumber == MAX_DATA_BLOCK_FILE_NUMBER( uiDbVersion))
{
break;
}
uiHighFileNumber++;
}
// See how many rollback log files we have, and calculate
// their total size.
uiHighLogFileNumber = FIRST_LOG_BLOCK_FILE_NUMBER( uiDbVersion);
for (;;)
{
if ((RC_BAD( rc = pSrcSFileHdl->getFileSize(
uiHighLogFileNumber, &ui64FileSize))) || !ui64FileSize)
{
if (rc == FERR_IO_PATH_NOT_FOUND ||
rc == FERR_IO_INVALID_PATH ||
!ui64FileSize)
{
if (uiHighLogFileNumber ==
FIRST_LOG_BLOCK_FILE_NUMBER( uiDbVersion))
{
uiHighLogFileNumber = 0;
}
else
{
uiHighLogFileNumber--;
}
rc = FERR_OK;
break;
}
goto Exit;
}
DbCopyInfo.ui64BytesToCopy += ui64FileSize;
if (uiHighLogFileNumber == MAX_LOG_BLOCK_FILE_NUMBER( uiDbVersion))
{
break;
}
uiHighLogFileNumber++;
}
// Get the sizes of the roll-forward log files
if( uiDbVersion < FLM_FILE_FORMAT_VER_4_3)
{
// For pre-4.3 versions, only need to copy one RFL file.
if (RC_BAD( rc = rflGetFileName( uiDbVersion,
pszSrcDbName, pszSrcRflDir, 1, pszActualSrcRflPath)))
{
goto Exit;
}
if( RC_BAD( rc = gv_FlmSysData.pFileSystem->openFile(
pszActualSrcRflPath, gv_FlmSysData.uiFileOpenFlags,
&pTmpFileHdl)))
{
if (rc == FERR_IO_PATH_NOT_FOUND ||
rc == FERR_IO_INVALID_PATH)
{
rc = FERR_OK;
}
else
{
goto Exit;
}
}
else
{
if (RC_BAD( rc = pTmpFileHdl->size( &ui64FileSize)))
{
goto Exit;
}
DbCopyInfo.ui64BytesToCopy += ui64FileSize;
pTmpFileHdl->Release();
pTmpFileHdl = NULL;
}
}
else
{
if( RC_BAD( rc = rflGetDirAndPrefix( uiDbVersion, pszSrcDbName,
pszSrcRflDir, pszActualSrcRflPath, pszSrcPrefix)))
{
goto Exit;
}
if (RC_BAD( rc = gv_FlmSysData.pFileSystem->openDir(
pszActualSrcRflPath, (char *)"*", &pDirHdl)))
{
goto Exit;
}
for (;;)
{
if( RC_BAD( rc = pDirHdl->next()))
{
if (rc == FERR_IO_NO_MORE_FILES)
{
rc = FERR_OK;
break;
}
else
{
goto Exit;
}
}
// If the current file is an RFL file, increment ui64BytesToCopy
if( rflGetFileNum( uiDbVersion, pszSrcPrefix,
pDirHdl->currentItemName(), &uiFileNumber))
{
DbCopyInfo.ui64BytesToCopy += pDirHdl->currentItemSize();
}
}
pDirHdl->Release();
pDirHdl = NULL;
}
// Close all file handles in the source and destination
pSrcSFileHdl->releaseFiles();
pDestSFileHdl->releaseFiles();
// Copy the database files.
for (uiFileNumber = 0; uiFileNumber <= uiHighFileNumber; uiFileNumber++)
{
// Get the source file path and destination file path.
if( RC_BAD( rc = pSrcSFileHdl->getFilePath(
uiFileNumber, DbCopyInfo.szSrcFileName)))
{
goto Exit;
}
if( RC_BAD( rc = pDestSFileHdl->getFilePath(
uiFileNumber, DbCopyInfo.szDestFileName)))
{
goto Exit;
}
// For the control file, don't copy first 2K - it will be set up
// to show maintenance in progress. Then the first 2K will be copied
// later.
if (!uiFileNumber)
{
DbCopyInfo.bNewSrcFile = TRUE;
if (RC_BAD( rc = flmCopyFile( gv_FlmSysData.pFileSystem,
2048, 0xFFFFFFFF,
&DbCopyInfo, &pCopiedList, pucInMemLogHdr, TRUE,
fnStatusCallback, UserData)))
{
goto Exit;
}
}
else
{
DbCopyInfo.bNewSrcFile = TRUE;
if (RC_BAD( rc = flmCopyFile( gv_FlmSysData.pFileSystem,
0, 0xFFFFFFFF,
&DbCopyInfo, &pCopiedList, NULL, TRUE,
fnStatusCallback, UserData)))
{
goto Exit;
}
}
}
// Copy the additional rollback log files, if any.
for (uiFileNumber = FIRST_LOG_BLOCK_FILE_NUMBER( uiDbVersion);
uiFileNumber <= uiHighLogFileNumber; uiFileNumber++)
{
// Get the source file path and destination file path.
if (RC_BAD( rc = pSrcSFileHdl->getFilePath( uiFileNumber,
DbCopyInfo.szSrcFileName)))
{
goto Exit;
}
if (RC_BAD( rc = pDestSFileHdl->getFilePath( uiFileNumber,
DbCopyInfo.szDestFileName)))
{
goto Exit;
}
DbCopyInfo.bNewSrcFile = TRUE;
if (RC_BAD( rc = flmCopyFile( gv_FlmSysData.pFileSystem,
0, 0xFFFFFFFF,
&DbCopyInfo, &pCopiedList, NULL, TRUE,
fnStatusCallback, UserData)))
{
goto Exit;
}
}
// Copy the RFL files
if( uiDbVersion < FLM_FILE_FORMAT_VER_4_3)
{
// Get the source file path and the destination file path.
if (RC_BAD( rc = rflGetFileName( uiDbVersion, pszSrcDbName,
pszSrcRflDir, 1,
DbCopyInfo.szSrcFileName)))
{
goto Exit;
}
if (RC_BAD( rc = rflGetFileName( uiDbVersion, pszDestDbName,
pszDestRflDir, 1,
DbCopyInfo.szDestFileName)))
{
goto Exit;
}
DbCopyInfo.bNewSrcFile = TRUE;
if (RC_BAD( rc = flmCopyFile( gv_FlmSysData.pFileSystem,
0, 0xFFFFFFFF,
&DbCopyInfo, &pCopiedList, NULL, TRUE,
fnStatusCallback, UserData)))
{
goto Exit;
}
}
else
{
// Create the destination RFL directory, if needed. The purpose of this
// code is two-fold: 1) We want to keep track of the fact that we tried
// to create the destination RFL directory so we can try to remove it
// if the copy fails; 2) If the destination RFL directory path specifies
// a directory with existing files, we want to remove them.
if( RC_BAD( rc = rflGetDirAndPrefix( uiDbVersion, pszDestDbName,
pszDestRflDir, pszActualDestRflPath, pszDestPrefix)))
{
goto Exit;
}
if( RC_OK( gv_FlmSysData.pFileSystem->doesFileExist(
pszActualDestRflPath)))
{
if( gv_FlmSysData.pFileSystem->isDir( pszActualDestRflPath))
{
// Remove the existing directory and all files, etc.
(void)gv_FlmSysData.pFileSystem->removeDir(
pszActualDestRflPath, TRUE);
}
else
{
(void)gv_FlmSysData.pFileSystem->deleteFile( pszActualDestRflPath);
}
}
// Try to create the destination RFL directory. This might fail if
// another process was accessing the directory for some reason
// (i.e., from a command prompt), when we tried to remove it above.
// We really don't care if the call to CreateDir is sucessful, because
// when we try to create the destination files (below), the FLAIM file
// file system code will try to create any necessary directories.
(void)gv_FlmSysData.pFileSystem->createDir( pszActualDestRflPath);
bCreatedDestRflDir = TRUE;
// Copy the RFL files. NOTE: We need to copy all of the RFL files
// in the source RFL directory so that they will be available
// when performing a database restore operation.
if (RC_BAD( rc = gv_FlmSysData.pFileSystem->openDir(
pszActualSrcRflPath, (char *)"*", &pDirHdl)))
{
goto Exit;
}
for (;;)
{
if( RC_BAD( rc = pDirHdl->next()))
{
if (rc == FERR_IO_NO_MORE_FILES)
{
rc = FERR_OK;
break;
}
else
{
goto Exit;
}
}
// If the current file is an RFL file, copy it to the destination
if( rflGetFileNum( uiDbVersion, pszSrcPrefix,
pDirHdl->currentItemName(), &uiFileNumber))
{
// Get the source file path and the destination file path.
if (RC_BAD( rc = rflGetFileName( uiDbVersion, pszSrcDbName,
pszSrcRflDir, uiFileNumber,
DbCopyInfo.szSrcFileName)))
{
goto Exit;
}
if (RC_BAD( rc = rflGetFileName( uiDbVersion, pszDestDbName,
pszDestRflDir, uiFileNumber,
DbCopyInfo.szDestFileName)))
{
goto Exit;
}
DbCopyInfo.bNewSrcFile = TRUE;
if (RC_BAD( rc = flmCopyFile( gv_FlmSysData.pFileSystem,
0, 0xFFFFFFFF,
&DbCopyInfo, &pCopiedList, NULL, TRUE,
fnStatusCallback, UserData)))
{
goto Exit;
}
}
}
pDirHdl->Release();
pDirHdl = NULL;
}
// Do one final copy on the control file to copy just the first 2K
if (RC_BAD( rc = pSrcSFileHdl->getFilePath( 0, DbCopyInfo.szSrcFileName)))
{
goto Exit;
}
if (RC_BAD( rc = pDestSFileHdl->getFilePath( 0, DbCopyInfo.szDestFileName)))
{
goto Exit;
}
DbCopyInfo.bNewSrcFile = FALSE;
if (RC_BAD( rc = flmCopyFile( gv_FlmSysData.pFileSystem,
0, 2048,
&DbCopyInfo, NULL, pucInMemLogHdr, FALSE,
fnStatusCallback, UserData)))
{
goto Exit;
}
Exit:
if (bUsedFFile)
{
if (!bMutexLocked)
{
f_mutexLock( gv_FlmSysData.hShareMutex);
bMutexLocked = TRUE;
}
if (!(--pFile->uiUseCount))
{
flmLinkFileToNUList( pFile);
}
}
if (bMutexLocked)
{
f_mutexUnlock( gv_FlmSysData.hShareMutex);
bMutexLocked = FALSE;
}
if (bWriteLocked)
{
if( RC_BAD( rc = pWriteLockObj->unlock()))
{
goto Exit;
}
bWriteLocked = FALSE;
}
if (bFileLocked)
{
RCODE rc3;
if (RC_BAD( rc3 = pFileLockObj->unlock()))
{
if (RC_OK( rc))
rc = rc3;
}
bFileLocked = FALSE;
}
if (pWriteLockObj)
{
pWriteLockObj->Release();
pWriteLockObj = NULL;
}
if (pFileLockObj)
{
pFileLockObj->Release();
pFileLockObj = NULL;
}
if (pLockFileHdl)
{
pLockFileHdl->Release();
pLockFileHdl = NULL;
}
if( pTmpFileHdl)
{
pTmpFileHdl->Release();
}
if( pDirHdl)
{
pDirHdl->Release();
}
// Free all the names of files that were copied.
// If the copy didn't finish, try to delete any files
// that were copied.
while (pCopiedList)
{
COPIED_NAME * pNext = pCopiedList->pNext;
// If the overall copy failed, delete the copied file.
if (RC_BAD( rc))
{
(void)gv_FlmSysData.pFileSystem->deleteFile( pCopiedList->szPath);
}
f_free( &pCopiedList);
pCopiedList = pNext;
}
if( RC_BAD( rc) && bCreatedDestRflDir)
{
(void)gv_FlmSysData.pFileSystem->removeDir( pszActualDestRflPath);
}
if( pszActualSrcRflPath)
{
f_free( &pszActualSrcRflPath);
}
if( hWaitSem != F_SEM_NULL)
{
f_semDestroy( &hWaitSem);
}
if( pSrcSFileHdl)
{
pSrcSFileHdl->Release();
}
if( pSrcSFileClient)
{
pSrcSFileClient->Release();
}
if( pDestSFileHdl)
{
pDestSFileHdl->Release();
}
if( pDestSFileClient)
{
pDestSFileClient->Release();
}
return( rc);
}
