void commonConfig(ConfigVersion_t configVersion = kConfigV0)
{
cout << "Running commonConfig.C ... " << endl;
// Set Random Number seed
gRandom->SetSeed(123456); // Set 0 to use the currecnt time
IlcLog::Message(IlcLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);
//=======================================================================
// Load Pythia libraries
//=======================================================================
LoadPythia();
//=======================================================================
// ILC steering object (IlcRunLoader)
//=======================================================================
IlcRunLoader* rl
= IlcRunLoader::Open("gilc.root",
IlcConfig::GetDefaultEventFolderName(),
"recreate");
if ( ! rl ) {
gIlc->Fatal("Config.C","Can not instatiate the Run Loader");
return;
}
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(3);
gIlc->SetRunLoader(rl);
//======================================================================
// Trigger configuration
//=======================================================================
IlcSimulation::Instance()->SetTriggerConfig(pprTrigConfName[strig]);
cout << "Trigger configuration is set to " << pprTrigConfName[strig] << endl;
// =============================
// Magnetic field
// =============================
// Field (L3 0.5 T)
IlcMagF* field = new IlcMagF("Maps","Maps", -1., -1., IlcMagF::k5kG);
TGeoGlobalMagField::Instance()->SetField(field);
printf("\n \n Comment: %s \n \n", comment.Data());
// =============================
// Modules
// =============================
rl->CdGAFile();
Int_t iABSO = 1;
Int_t iDIPO = 1;
Int_t iFMD = 1;
Int_t iFRAME = 1;
Int_t iHALL = 1;
Int_t iITS = 1;
Int_t iMAG = 1;
Int_t iMUON = 1;
Int_t iPHOS = 1;
Int_t iPIPE = 1;
Int_t iPMD = 1;
Int_t iHMPID = 1;
Int_t iSHIL = 1;
Int_t iT0 = 1;
Int_t iTOF = 1;
Int_t iTPC = 1;
Int_t iTRD = 1;
Int_t iZDC = 1;
Int_t iEMCAL = 1;
Int_t iACORDE = 1;
Int_t iVZERO = 1;
rl->CdGAFile();
//=================== Ilc BODY parameters =============================
IlcBODY *BODY = new IlcBODY("BODY", "Ilc envelop");
if (iMAG)
{
//=================== MAG parameters ============================
// --- Start with Magnet since detector layouts may be depending ---
// --- on the selected Magnet dimensions ---
IlcMAG *MAG = new IlcMAG("MAG", "Magnet");
}
if (iABSO)
{
//=================== ABSO parameters ============================
IlcABSO *ABSO = new IlcABSOv3("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
IlcDIPO *DIPO = new IlcDIPOv3("DIPO", "Dipole version 3");
}
if (iHALL)
{
//=================== HALL parameters ============================
IlcHALL *HALL = new IlcHALLv3("HALL", "Ilc Hall");
}
if (iFRAME)
{
//=================== FRAME parameters ============================
IlcFRAMEv2 *FRAME = new IlcFRAMEv2("FRAME", "Space Frame");
FRAME->SetHoles(1);
}
if (iSHIL)
{
//=================== SHIL parameters ============================
IlcSHIL *SHIL = new IlcSHILv3("SHIL", "Shielding Version 3");
}
if (iPIPE)
{
//=================== PIPE parameters ============================
IlcPIPE *PIPE = new IlcPIPEv3("PIPE", "Beam Pipe");
}
if (iITS)
{
//=================== ITS parameters ============================
IlcITS *ITS = new IlcITSv11("ITS","ITS v11");
}
if (iTPC)
{
//============================ TPC parameters ===================
IlcTPC *TPC = new IlcTPCv2("TPC", "Default");
}
if (iTOF) {
//=================== TOF parameters ============================
IlcTOF *TOF = new IlcTOFv6T0("TOF", "normal TOF");
}
if (iHMPID)
{
//=================== HMPID parameters ===========================
IlcHMPID *HMPID = new IlcHMPIDv3("HMPID", "normal HMPID");
}
if (iZDC)
{
//=================== ZDC parameters ============================
IlcZDC *ZDC = new IlcZDCv3("ZDC", "normal ZDC");
}
if (iTRD)
{
//=================== TRD parameters ============================
IlcTRD *TRD = new IlcTRDv1("TRD", "TRD slow simulator");
if ( configVersion == kConfigV1 ) {
IlcTRDgeometry *geoTRD = TRD->GetGeometry();
// Partial geometry: modules at 0,1,7,8,9,16,17
// starting at 3h in positive direction
geoTRD->SetSMstatus(2,0);
geoTRD->SetSMstatus(3,0);
geoTRD->SetSMstatus(4,0);
geoTRD->SetSMstatus(5,0);
geoTRD->SetSMstatus(6,0);
geoTRD->SetSMstatus(11,0);
geoTRD->SetSMstatus(12,0);
geoTRD->SetSMstatus(13,0);
geoTRD->SetSMstatus(14,0);
geoTRD->SetSMstatus(15,0);
geoTRD->SetSMstatus(16,0);
}
}
if (iFMD)
{
//=================== FMD parameters ============================
IlcFMD *FMD = new IlcFMDv1("FMD", "normal FMD");
}
if (iMUON)
{
//=================== MUON parameters ===========================
// New MUONv1 version (geometry defined via builders)
IlcMUON *MUON = new IlcMUONv1("MUON", "default");
}
//=================== PHOS parameters ===========================
if (iPHOS)
{
if ( configVersion == kConfigV0 )
IlcPHOS *PHOS = new IlcPHOSv1("PHOS", "IHEP");
else if ( configVersion == kConfigV1 )
IlcPHOS *PHOS = new IlcPHOSv1("PHOS", "noCPV_Modules123");
}
if (iPMD)
{
//=================== PMD parameters ============================
IlcPMD *PMD = new IlcPMDv1("PMD", "normal PMD");
}
if (iT0)
{
//=================== T0 parameters ============================
IlcT0 *T0 = new IlcT0v1("T0", "T0 Detector");
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
if ( configVersion == kConfigV0 )
IlcEMCAL *EMCAL = new IlcEMCALv2("EMCAL", "EMCAL_COMPLETEV1");
else if ( configVersion == kConfigV1 )
IlcEMCAL *EMCAL = new IlcEMCALv2("EMCAL", "EMCAL_FIRSTYEARV1");
}
if (iACORDE)
{
//=================== ACORDE parameters ============================
IlcACORDE *ACORDE = new IlcACORDEv1("ACORDE", "normal ACORDE");
}
if (iVZERO)
{
//=================== VZERO parameters ============================
IlcVZERO *VZERO = new IlcVZEROv7("VZERO", "normal VZERO");
}
IlcLog::Message(IlcLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
cout << "Running commonConfig.C finished ... " << endl;
}
void Config()
{
cout << "==> Config.C..." << endl;
// Set Random Number seed
UInt_t at = (UInt_t) gSystem->Now() ;
UInt_t seed = ((gSystem->GetPid()*111)%at)*137 ;
// gRandom->SetSeed(seed);
gRandom->SetSeed(12345);
printf("MySeed: %d\n",seed) ;
cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl;
// libraries required by fluka21
Bool_t isFluka = kFALSE;
if (isFluka) {
gSystem->Load("libGeom");
cout << "\t* Loading TFluka..." << endl;
gSystem->Load("libTFluka");
cout << "\t* Instantiating TFluka..." << endl;
new TFluka("C++ Interface to Fluka", 0/*verbositylevel*/);
}
else {
cout << "\t* Loading Geant3..." << endl;
gSystem->Load("libgeant321");
cout << "\t* Instantiating Geant3TGeo..." << endl;
new TGeant3TGeo("C++ Interface to Geant3");
}
IlcRunLoader* rl=0x0;
cout<<"Config.C: Creating Run Loader ..."<<endl;
rl = IlcRunLoader::Open("gilc.root",
IlcConfig::GetDefaultEventFolderName(),
"recreate");
if (rl == 0x0)
{
gIlc->Fatal("Config.C","Can not instatiate the Run Loader");
return;
}
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(1000);
gIlc->SetRunLoader(rl);
//
// Set External decayer
IlcDecayer *decayer = new IlcDecayerPythia();
decayer->SetForceDecay(kAll);
decayer->Init();
gMC->SetExternalDecayer(decayer);
//
//
//
// Physics process control
gMC->SetProcess("DCAY",1);
gMC->SetProcess("PAIR",1);
gMC->SetProcess("COMP",1);
gMC->SetProcess("PHOT",1);
gMC->SetProcess("PFIS",0);
gMC->SetProcess("DRAY",0); //AZ 1);
gMC->SetProcess("ANNI",1);
gMC->SetProcess("BREM",1);
gMC->SetProcess("MUNU",1);
gMC->SetProcess("CKOV",1);
gMC->SetProcess("HADR",1);
gMC->SetProcess("LOSS",2);
gMC->SetProcess("MULS",1);
gMC->SetProcess("RAYL",1);
Float_t cut = 1.e-3; // 1MeV cut by default
Float_t tofmax = 1.e10;
gMC->SetCut("CUTGAM", cut);
gMC->SetCut("CUTELE", cut);
gMC->SetCut("CUTNEU", cut);
gMC->SetCut("CUTHAD", cut);
gMC->SetCut("CUTMUO", cut);
gMC->SetCut("BCUTE", cut);
gMC->SetCut("BCUTM", cut);
gMC->SetCut("DCUTE", cut);
gMC->SetCut("DCUTM", cut);
gMC->SetCut("PPCUTM", cut);
gMC->SetCut("TOFMAX", tofmax);
((IlcMC*)gMC)->SetTransPar("./gilc.cuts") ;
//
//=======================================================================
// ************* STEERING parameters FOR ILC SIMULATION **************
// --- Specify event type to be tracked through the ILC setup
// --- All positions are in cm, angles in degrees, and P and E in GeV
IlcGenBox *gener = new IlcGenBox(5);
gener->SetMomentumRange(0.5, 5.);
gener->SetPhiRange(260., 280.);
gener->SetThetaRange(82.,98.);
gener->SetPart(kGamma);
gener->SetOrigin(0, 0, 0); //vertex position
gener->SetSigma(0, 0, 0); //Sigma in (X,Y,Z) (cm) on IP position
gener->Init() ;
//
// Activate this line if you want the vertex smearing to happen
// track by track
//
// gener->SetVertexSmear(kPerEvent) ;
if (smag == IlcMagF::k2kG) {
comment = comment.Append(" | L3 field 0.2 T");
} else if (smag == IlcMagF::k5kG) {
comment = comment.Append(" | L3 field 0.5 T");
}
if (srad == kGluonRadiation)
{
comment = comment.Append(" | Gluon Radiation On");
} else {
comment = comment.Append(" | Gluon Radiation Off");
}
if (sgeo == kHoles)
{
comment = comment.Append(" | Holes for PVBAR/RICH");
} else {
comment = comment.Append(" | No holes for PVBAR/RICH");
}
printf("\n \n Comment: %s \n \n", comment.Data());
// Field (L3 0.4 T)
//Zero magnetic field
IlcMagF* field = new IlcMagF("Maps","Maps", 0., 0., IlcMagF::k5kGUniform);
// IlcMagF* field = new IlcMagF("Maps","Maps", 2, -1., -1., 10., smag);
TGeoGlobalMagField::Instance()->SetField(field);
rl->CdGAFile();
Int_t iABSO = 0;
Int_t iCRT = 0;
Int_t iDIPO = 0;
Int_t iFMD = 0;
Int_t iFRAME = 0;
Int_t iHALL = 0;
Int_t iITS = 0;
Int_t iMAG = 0;
Int_t iMUON = 0;
Int_t iPVBAR = 1;
Int_t iPIPE = 0;
Int_t iPMD = 0;
Int_t iRICH = 0;
Int_t iSHIL = 0;
Int_t iSTART = 0;
Int_t iTOF = 0;
Int_t iTPC = 0;
Int_t iTRD = 0;
Int_t iZDC = 0;
Int_t iEMCAL = 0;
Int_t iVZERO = 0;
cout << "\t* Creating the detectors ..." << endl;
//=================== Ilc BODY parameters =============================
//=================== Ilc BODY parameters =============================
IlcBODY *BODY = new IlcBODY("BODY", "Ilc envelop");
if (iMAG)
{
//=================== MAG parameters ============================
// --- Start with Magnet since detector layouts may be depending ---
// --- on the selected Magnet dimensions ---
IlcMAG *MAG = new IlcMAG("MAG", "Magnet");
}
if (iABSO)
{
//=================== ABSO parameters ============================
IlcABSO *ABSO = new IlcABSOv0("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
IlcDIPO *DIPO = new IlcDIPOv2("DIPO", "Dipole version 2");
}
if (iHALL)
{
//=================== HALL parameters ============================
IlcHALL *HALL = new IlcHALL("HALL", "Ilc Hall");
}
if (iFRAME)
{
//=================== FRAME parameters ============================
IlcFRAMEv2 *FRAME = new IlcFRAMEv2("FRAME", "Space Frame");
if (sgeo == kHoles) {
FRAME->SetHoles(1);
} else {
FRAME->SetHoles(0);
}
}
if (iSHIL)
{
//=================== SHIL parameters ============================
IlcSHIL *SHIL = new IlcSHILv2("SHIL", "Shielding Version 2");
}
if (iPIPE)
{
//=================== PIPE parameters ============================
IlcPIPE *PIPE = new IlcPIPEv0("PIPE", "Beam Pipe");
}
if(iITS) {
//=================== ITS parameters ============================
//
// As the innermost detector in ILC, the Inner Tracking System "impacts" on
// almost all other detectors. This involves the fact that the ITS geometry
// still has several options to be followed in parallel in order to determine
// the best set-up which minimizes the induced background. All the geometries
// available to date are described in the following. Read carefully the comments
// and use the default version (the only one uncommented) unless you are making
// comparisons and you know what you are doing. In this case just uncomment the
// ITS geometry you want to use and run Ilcroot.
//
// Detailed geometries:
//
//
//IlcITS *ITS = new IlcITSv5symm("ITS","Updated ITS TDR detailed version with symmetric services");
//
//IlcITS *ITS = new IlcITSv5asymm("ITS","Updates ITS TDR detailed version with asymmetric services");
//
IlcITSvPPRasymmFMD *ITS = new IlcITSvPPRasymmFMD("ITS","New ITS PPR detailed version with asymmetric services");
ITS->SetMinorVersion(2); // don't touch this parameter if you're not an ITS developer
ITS->SetReadDet(kTRUE); // don't touch this parameter if you're not an ITS developer
// ITS->SetWriteDet("$ILC_ROOT/ITS/ITSgeometry_vPPRasymm2.det"); // don't touch this parameter if you're not an ITS developer
ITS->SetThicknessDet1(200.); // detector thickness on layer 1 must be in the range [100,300]
ITS->SetThicknessDet2(200.); // detector thickness on layer 2 must be in the range [100,300]
ITS->SetThicknessChip1(200.); // chip thickness on layer 1 must be in the range [150,300]
ITS->SetThicknessChip2(200.); // chip thickness on layer 2 must be in the range [150,300]
ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
ITS->SetCoolingFluid(1); // 1 --> water ; 0 --> freon
// Coarse geometries (warning: no hits are produced with these coarse geometries and they unuseful
// for reconstruction !):
//
//
//IlcITSvPPRcoarseasymm *ITS = new IlcITSvPPRcoarseasymm("ITS","New ITS PPR coarse version with asymmetric services");
//ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
//ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
//
//IlcITS *ITS = new IlcITSvPPRcoarsesymm("ITS","New ITS PPR coarse version with symmetric services");
//ITS->SetRails(0); // 1 --> rails in ; 0 --> rails out
//ITS->SetSupportMaterial(0); // 0 --> Copper ; 1 --> Aluminum ; 2 --> Carbon
//
//
//
// Geant3 <-> EUCLID conversion
// ============================
//
// SetEUCLID is a flag to output (=1) or not to output (=0) both geometry and
// media to two ASCII files (called by default ITSgeometry.euc and
// ITSgeometry.tme) in a format understandable to the CAD system EUCLID.
// The default (=0) means that you dont want to use this facility.
//
ITS->SetEUCLID(0);
}
if (iTPC)
{
//============================ TPC parameters ================================
// IlcTPC *TPC = new IlcTPCv0("TPC", "Default");
IlcTPC *TPC = new IlcTPCv2("TPC", "Default");
}
if (iTOF) {
//=================== TOF parameters ============================
IlcTOF *TOF = new IlcTOFv4T0("TOF", "normal TOF");
}
if (iRICH)
{
//=================== RICH parameters ===========================
IlcRICH *RICH = new IlcRICHv1("RICH", "normal RICH");
}
if (iZDC)
{
//=================== ZDC parameters ============================
IlcZDC *ZDC = new IlcZDCv2("ZDC", "normal ZDC");
}
if (iTRD)
{
//=================== TRD parameters ============================
IlcTRD *TRD = new IlcTRDv1("TRD", "TRD slow simulator");
// Select the gas mixture (0: 97% Xe + 3% isobutane, 1: 90% Xe + 10% CO2)
TRD->SetGasMix(1);
if (sgeo == kHoles) {
// With hole in front of PVBAR
TRD->SetPVBARhole();
// With hole in front of RICH
TRD->SetRICHhole();
}
// Switch on TR
IlcTRDsim *TRDsim = TRD->CreateTR();
}
if (iFMD)
{
//=================== FMD parameters ============================
IlcFMD *FMD = new IlcFMDv1("FMD", "normal FMD");
}
if (iMUON)
{
//=================== MUON parameters ===========================
IlcMUON *MUON = new IlcMUONv1("MUON", "default");
}
//=================== PVBAR parameters ===========================
if (iPVBAR)
{
IlcPVBAR *PVBAR = new IlcPVBARv1("PVBAR", "ORKA");
// IlcPVBAR *PVBAR = new IlcPVBARv1("PVBAR", "noCPV");
}
if (iPMD)
{
//=================== PMD parameters ============================
IlcPMD *PMD = new IlcPMDv1("PMD", "normal PMD");
}
if (iSTART)
{
//=================== START parameters ============================
IlcSTART *START = new IlcSTARTv1("START", "START Detector");
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
IlcEMCAL *EMCAL = new IlcEMCALv2("EMCAL", "EMCAL_COMPLETEV1");
}
if (iCRT)
{
//=================== CRT parameters ============================
IlcCRT *CRT = new IlcCRTv0("CRT", "normal ACORDE");
}
if (iVZERO)
{
//=================== CRT parameters ============================
IlcVZERO *VZERO = new IlcVZEROv3("VZERO", "normal VZERO");
}
}
void Config()
{
// Get settings from environment variables
ProcessEnvironmentVars();
gRandom->SetSeed(seed);
cerr<<"Seed for random number generation= "<<seed<<endl;
// Libraries required by geant321
#if defined(__CINT__)
gSystem->Load("liblhapdf"); // Parton density functions
gSystem->Load("libEGPythia6"); // TGenerator interface
gSystem->Load("libpythia6"); // Pythia
gSystem->Load("libIlcPythia6"); // ILC specific implementations
gSystem->Load("libgeant321");
#endif
new TGeant3TGeo("C++ Interface to Geant3");
//=======================================================================
// Create the output file
IlcRunLoader* rl=0x0;
cout<<"Config.C: Creating Run Loader ..."<<endl;
rl = IlcRunLoader::Open("gilc.root",
IlcConfig::GetDefaultEventFolderName(),
"recreate");
if (rl == 0x0)
{
gIlc->Fatal("Config.C","Can not instatiate the Run Loader");
return;
}
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(1000);
gIlc->SetRunLoader(rl);
// gIlc->SetGeometryFromFile("geometry.root");
// gIlc->SetGeometryFromCDB();
// Set the trigger configuration: proton-proton
IlcSimulation::Instance()->SetTriggerConfig("p-p");
//
//=======================================================================
// ************* STEERING parameters FOR ILC SIMULATION **************
// --- Specify event type to be tracked through the ILC setup
// --- All positions are in cm, angles in degrees, and P and E in GeV
gMC->SetProcess("DCAY",1);
gMC->SetProcess("PAIR",1);
gMC->SetProcess("COMP",1);
gMC->SetProcess("PHOT",1);
gMC->SetProcess("PFIS",0);
gMC->SetProcess("DRAY",0);
gMC->SetProcess("ANNI",1);
gMC->SetProcess("BREM",1);
gMC->SetProcess("MUNU",1);
gMC->SetProcess("CKOV",1);
gMC->SetProcess("HADR",1);
gMC->SetProcess("LOSS",2);
gMC->SetProcess("MULS",1);
gMC->SetProcess("RAYL",1);
Float_t cut = 1.e-3; // 1MeV cut by default
Float_t tofmax = 1.e10;
gMC->SetCut("CUTGAM", cut);
gMC->SetCut("CUTELE", cut);
gMC->SetCut("CUTNEU", cut);
gMC->SetCut("CUTHAD", cut);
gMC->SetCut("CUTMUO", cut);
gMC->SetCut("BCUTE", cut);
gMC->SetCut("BCUTM", cut);
gMC->SetCut("DCUTE", cut);
gMC->SetCut("DCUTM", cut);
gMC->SetCut("PPCUTM", cut);
gMC->SetCut("TOFMAX", tofmax);
//======================//
// Set External decayer //
//======================//
TVirtualMCDecayer* decayer = new IlcDecayerPythia();
decayer->SetForceDecay(kAll);
decayer->Init();
gMC->SetExternalDecayer(decayer);
//=========================//
// Generator Configuration //
//=========================//
// Create pileup generator
IlcGenPileup *pileup = new IlcGenPileup();
IlcGenerator* gener = 0x0;
if (proc == kPythia6) {
gener = MbPythia();
} else if (proc == kPhojet) {
gener = MbPhojet();
}
// Set the pileup interaction generator
// The second argument is the pileup rate
// in terms of event rate per bunch crossing
pileup->SetGenerator(gener,0.01);
// Set the beam time structure
// Details on the syntax in STEER/IlcTriggerBCMask
pileup->SetBCMask("72(1H1L)3420L");
// Examples of the pileup rate and beam structure settings
// Most of the information is taken from the LHC commissionning page
// rate from 0.01 (at 900GeV) to 0.76 (at 14TeV)
// 1 bunch/orbit - bc-mask = "1H3563L"
// 43 bunches/orbit - bc-mask = "43(1H80L)81L"
// 72 bunches/orbit - bc-mask = "72(1H1L)3420L" (50ns mode)
// Please note that most of these setting should be cross-checked because
// for example the 43 bunches mode is taken at CMS IP and not the ILC one.
// Generate the trigger interaction
pileup->GenerateTrigInteraction(kTRUE);
// PRIMARY VERTEX
//
pileup->SetOrigin(0., 0., 0.); // vertex position
//
//
// Size of the interaction diamond
// Longitudinal
Float_t sigmaz = 5.4 / TMath::Sqrt(2.); // [cm]
if (energy == 900)
sigmaz = 10.5 / TMath::Sqrt(2.); // [cm]
//
// Transverse
Float_t betast = 10; // beta* [m]
Float_t eps = 3.75e-6; // emittance [m]
Float_t gamma = energy / 2.0 / 0.938272; // relativistic gamma [1]
Float_t sigmaxy = TMath::Sqrt(eps * betast / gamma) / TMath::Sqrt(2.) * 100.; // [cm]
printf("\n \n Diamond size x-y: %10.3e z: %10.3e\n \n", sigmaxy, sigmaz);
pileup->SetSigma(sigmaxy, sigmaxy, sigmaz); // Sigma in (X,Y,Z) (cm) on IP position
pileup->SetCutVertexZ(3.); // Truncate at 3 sigma
pileup->SetVertexSmear(kPerEvent);
pileup->Init();
// FIELD
//
IlcMagF* field = 0x0;
if (mag == kNoField) {
comment = comment.Append(" | L3 field 0.0 T");
field = new IlcMagF("Maps","Maps", 0., 0., IlcMagF::k5kGUniform);
} else if (mag == k5kG) {
comment = comment.Append(" | L3 field 0.5 T");
field = new IlcMagF("Maps","Maps", -1., -1., IlcMagF::k5kG);
}
printf("\n \n Comment: %s \n \n", comment.Data());
TGeoGlobalMagField::Instance()->SetField(field);
rl->CdGAFile();
Int_t iABSO = 1;
Int_t iACORDE= 0;
Int_t iDIPO = 1;
Int_t iEMCAL = 0;
Int_t iFMD = 1;
Int_t iFRAME = 1;
Int_t iHALL = 1;
Int_t iITS = 1;
Int_t iMAG = 1;
Int_t iMUON = 1;
Int_t iPHOS = 1;
Int_t iPIPE = 1;
Int_t iPMD = 0;
Int_t iHMPID = 1;
Int_t iSHIL = 1;
Int_t iT0 = 1;
Int_t iTOF = 1;
Int_t iTPC = 1;
Int_t iTRD = 1;
Int_t iVZERO = 1;
Int_t iZDC = 1;
//=================== Ilc BODY parameters =============================
IlcBODY *BODY = new IlcBODY("BODY", "Ilc envelop");
if (iMAG)
{
//=================== MAG parameters ============================
// --- Start with Magnet since detector layouts may be depending ---
// --- on the selected Magnet dimensions ---
IlcMAG *MAG = new IlcMAG("MAG", "Magnet");
}
if (iABSO)
{
//=================== ABSO parameters ============================
IlcABSO *ABSO = new IlcABSOv3("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
IlcDIPO *DIPO = new IlcDIPOv3("DIPO", "Dipole version 3");
}
if (iHALL)
{
//=================== HALL parameters ============================
IlcHALL *HALL = new IlcHALLv3("HALL", "Ilc Hall");
}
if (iFRAME)
{
//=================== FRAME parameters ============================
IlcFRAMEv2 *FRAME = new IlcFRAMEv2("FRAME", "Space Frame");
FRAME->SetHoles(1);
}
if (iSHIL)
{
//=================== SHIL parameters ============================
IlcSHIL *SHIL = new IlcSHILv3("SHIL", "Shielding Version 3");
}
if (iPIPE)
{
//=================== PIPE parameters ============================
IlcPIPE *PIPE = new IlcPIPEv3("PIPE", "Beam Pipe");
}
if (iITS)
{
//=================== ITS parameters ============================
IlcITS *ITS = new IlcITSv11("ITS","ITS v11");
}
if (iTPC)
{
//============================ TPC parameters =====================
IlcTPC *TPC = new IlcTPCv2("TPC", "Default");
}
if (iTOF) {
//=================== TOF parameters ============================
IlcTOF *TOF = new IlcTOFv6T0("TOF", "normal TOF");
}
if (iHMPID)
{
//=================== HMPID parameters ===========================
IlcHMPID *HMPID = new IlcHMPIDv3("HMPID", "normal HMPID");
}
if (iZDC)
{
//=================== ZDC parameters ============================
IlcZDC *ZDC = new IlcZDCv4("ZDC", "normal ZDC");
}
if (iTRD)
{
//=================== TRD parameters ============================
IlcTRD *TRD = new IlcTRDv1("TRD", "TRD slow simulator");
IlcTRDgeometry *geoTRD = TRD->GetGeometry();
// Partial geometry: modules at 0,1,7,8,9,10,17
// starting at 3h in positive direction
geoTRD->SetSMstatus(2,0);
geoTRD->SetSMstatus(3,0);
geoTRD->SetSMstatus(4,0);
geoTRD->SetSMstatus(5,0);
geoTRD->SetSMstatus(6,0);
geoTRD->SetSMstatus(11,0);
geoTRD->SetSMstatus(12,0);
geoTRD->SetSMstatus(13,0);
geoTRD->SetSMstatus(14,0);
geoTRD->SetSMstatus(15,0);
geoTRD->SetSMstatus(16,0);
}
if (iFMD)
{
//=================== FMD parameters ============================
IlcFMD *FMD = new IlcFMDv1("FMD", "normal FMD");
}
if (iMUON)
{
//=================== MUON parameters ===========================
// New MUONv1 version (geometry defined via builders)
IlcMUON *MUON = new IlcMUONv1("MUON", "default");
}
if (iPHOS)
{
//=================== PHOS parameters ===========================
IlcPHOS *PHOS = new IlcPHOSv1("PHOS", "noCPV_Modules123");
}
if (iPMD)
{
//=================== PMD parameters ============================
IlcPMD *PMD = new IlcPMDv1("PMD", "normal PMD");
}
if (iT0)
{
//=================== T0 parameters ============================
IlcT0 *T0 = new IlcT0v1("T0", "T0 Detector");
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
IlcEMCAL *EMCAL = new IlcEMCALv2("EMCAL", "EMCAL_FIRSTYEAR");
}
if (iACORDE)
{
//=================== ACORDE parameters ============================
IlcACORDE *ACORDE = new IlcACORDEv1("ACORDE", "normal ACORDE");
}
if (iVZERO)
{
//=================== ACORDE parameters ============================
IlcVZERO *VZERO = new IlcVZEROv7("VZERO", "normal VZERO");
}
}
void Config()
{
// Get settings from environment variables
ProcessEnvironmentVars();
gRandom->SetSeed(seed);
cerr<<"Seed for random number generation= "<<seed<<endl;
// Libraries required by geant321
#if defined(__CINT__)
gSystem->Load("liblhapdf"); // Parton density functions
gSystem->Load("libEGPythia6"); // TGenerator interface
gSystem->Load("libpythia6"); // Pythia
gSystem->Load("libIlcPythia6"); // ILC specific implementations
gSystem->Load("libgeant321");
gSystem->Load("libTTherminator");
#endif
new TGeant3TGeo("C++ Interface to Geant3");
//=======================================================================
// Create the output file
IlcRunLoader* rl=0x0;
cout<<"Config.C: Creating Run Loader ..."<<endl;
rl = IlcRunLoader::Open("gilc.root",
IlcConfig::GetDefaultEventFolderName(),
"recreate");
if (rl == 0x0)
{
gIlc->Fatal("Config.C","Can not instatiate the Run Loader");
return;
}
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(3);
gIlc->SetRunLoader(rl);
// Set the trigger configuration
if ((embedrun == kBackground) || (embedrun == kMerged)) {
IlcSimulation::Instance()->SetTriggerConfig("Pb-Pb");
cout<<"Trigger configuration is set to Pb-Pb"<<endl;
}
else {
// Set the trigger configuration: proton-proton
IlcSimulation::Instance()->SetTriggerConfig("p-p");
}
//
// Set External decayer
TVirtualMCDecayer *decayer = new IlcDecayerPythia();
decayer->SetForceDecay(kAll);
decayer->Init();
gMC->SetExternalDecayer(decayer);
//=======================================================================
// ************* STEERING parameters FOR ILC SIMULATION **************
// --- Specify event type to be tracked through the ILC setup
// --- All positions are in cm, angles in degrees, and P and E in GeV
gMC->SetProcess("DCAY",1);
gMC->SetProcess("PAIR",1);
gMC->SetProcess("COMP",1);
gMC->SetProcess("PHOT",1);
gMC->SetProcess("PFIS",0);
gMC->SetProcess("DRAY",0);
gMC->SetProcess("ANNI",1);
gMC->SetProcess("BREM",1);
gMC->SetProcess("MUNU",1);
gMC->SetProcess("CKOV",1);
gMC->SetProcess("HADR",1);
gMC->SetProcess("LOSS",2);
gMC->SetProcess("MULS",1);
gMC->SetProcess("RAYL",1);
Float_t cut = 1.e-3; // 1MeV cut by default
Float_t tofmax = 1.e10;
gMC->SetCut("CUTGAM", cut);
gMC->SetCut("CUTELE", cut);
gMC->SetCut("CUTNEU", cut);
gMC->SetCut("CUTHAD", cut);
gMC->SetCut("CUTMUO", cut);
gMC->SetCut("BCUTE", cut);
gMC->SetCut("BCUTM", cut);
gMC->SetCut("DCUTE", cut);
gMC->SetCut("DCUTM", cut);
gMC->SetCut("PPCUTM", cut);
gMC->SetCut("TOFMAX", tofmax);
//======================//
// Set External decayer //
//======================//
TVirtualMCDecayer* decayer = new IlcDecayerPythia();
decayer->SetForceDecay(kAll);
decayer->Init();
gMC->SetExternalDecayer(decayer);
if ((embedrun == kMerged) || (embedrun == kSignal)) {
//=========================//
// Generator Configuration //
//=========================//
IlcGenerator* gener = 0x0;
if (proc == kPythia6) {
gener = MbPythia();
} else if (proc == kPhojet) {
gener = MbPhojet();
}
}
else {
IlcGenCocktail *gener = new IlcGenCocktail();
gener->SetPhiRange(0, 360);
// Set pseudorapidity range from -8 to 8.
Float_t thmin = EtaToTheta(1); // theta min. <---> eta max
Float_t thmax = EtaToTheta(-1); // theta max. <---> eta min
gener->SetThetaRange(thmin,thmax);
gener->SetProjectile("A",208,82);
gener->SetTarget("A",208,82);
IlcGenTherminator *genther = new IlcGenTherminator();
genther->SetFileName("event.out");
genther->SetEventNumberInFile(1);
genther->SetTemperature(0.145);
genther->SetMiuI(-0.0009);
genther->SetMiuS(0.000);
genther->SetMiuB(0.0008);
genther->SetAlfaRange(8.0);
genther->SetRapRange(4.0);
genther->SetRhoMax(7.74);
genther->SetTau(9.74);
genther->SetModel("Lhyquid3D");
genther->SetLhyquidSet("LHC500C2030");
gener->AddGenerator(genther, "THERMINATOR LHYQUID3D", 1);
}
// PRIMARY VERTEX
//
gener->SetOrigin(0., 0., 0.); // vertex position
//
//
// Size of the interaction diamond
// Longitudinal
Float_t sigmaz;
if (embedrun == kBackground) {
sigmaz = 7.55 / TMath::Sqrt(2.); // [cm]
}
else {
Float_t sigmaz = 5.4 / TMath::Sqrt(2.); // [cm]
if (energy == 900)
sigmaz = 10.5 / TMath::Sqrt(2.); // [cm]
}
//
// Transverse
Float_t betast = 10; // beta* [m]
Float_t eps = 3.75e-6; // emittance [m]
Float_t gamma = energy / 2.0 / 0.938272; // relativistic gamma [1]
Float_t sigmaxy = TMath::Sqrt(eps * betast / gamma) / TMath::Sqrt(2.) * 100.; // [cm]
printf("\n \n Diamond size x-y: %10.3e z: %10.3e\n \n", sigmaxy, sigmaz);
gener->SetSigma(sigmaxy, sigmaxy, sigmaz); // Sigma in (X,Y,Z) (cm) on IP position
gener->SetCutVertexZ(3.); // Truncate at 3 sigma
gener->SetVertexSmear(kPerEvent);
gener->Init();
// FIELD
//
// Field
// IlcMagF* field = 0x0;
if (mag == kNoField) {
comment = comment.Append(" | L3 field 0.0 T");
TGeoGlobalMagField::Instance()->SetField(new IlcMagF("Maps","Maps", 0., 0., IlcMagF::k5kGUniform));
} else if (mag == k5kG) {
comment = comment.Append(" | L3 field 0.5 T");
TGeoGlobalMagField::Instance()->SetField(new IlcMagF("Maps","Maps", -1., -1., IlcMagF::k5kG));
}
printf("\n \n Comment: %s \n \n", comment.Data());
// TGeoGlobalMagField::Instance()->SetField(field);
rl->CdGAFile();
Int_t iABSO = 1;
Int_t iACORDE= 0;
Int_t iDIPO = 1;
Int_t iEMCAL = 1;
Int_t iFMD = 1;
Int_t iFRAME = 1;
Int_t iHALL = 1;
Int_t iITS = 1;
Int_t iMAG = 1;
Int_t iMUON = 1;
Int_t iPHOS = 1;
Int_t iPIPE = 1;
Int_t iPMD = 1;
Int_t iHMPID = 1;
Int_t iSHIL = 1;
Int_t iT0 = 1;
Int_t iTOF = 1;
Int_t iTPC = 1;
Int_t iTRD = 1;
Int_t iVZERO = 1;
Int_t iZDC = 1;
//=================== Ilc BODY parameters =============================
IlcBODY *BODY = new IlcBODY("BODY", "Ilc envelop");
if (iMAG)
{
//=================== MAG parameters ============================
// --- Start with Magnet since detector layouts may be depending ---
// --- on the selected Magnet dimensions ---
IlcMAG *MAG = new IlcMAG("MAG", "Magnet");
}
if (iABSO)
{
//=================== ABSO parameters ============================
IlcABSO *ABSO = new IlcABSOv3("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
IlcDIPO *DIPO = new IlcDIPOv3("DIPO", "Dipole version 3");
}
if (iHALL)
{
//=================== HALL parameters ============================
IlcHALL *HALL = new IlcHALLv3("HALL", "Ilc Hall");
}
if (iFRAME)
{
//=================== FRAME parameters ============================
IlcFRAMEv2 *FRAME = new IlcFRAMEv2("FRAME", "Space Frame");
FRAME->SetHoles(1);
}
if (iSHIL)
{
//=================== SHIL parameters ============================
IlcSHIL *SHIL = new IlcSHILv3("SHIL", "Shielding Version 3");
}
if (iPIPE)
{
//=================== PIPE parameters ============================
IlcPIPE *PIPE = new IlcPIPEv3("PIPE", "Beam Pipe");
}
if (iITS)
{
//=================== ITS parameters ============================
IlcITS *ITS = new IlcITSv11("ITS","ITS v11");
}
if (iTPC)
{
//============================ TPC parameters =====================
IlcTPC *TPC = new IlcTPCv2("TPC", "Default");
}
if (iTOF) {
//=================== TOF parameters ============================
IlcTOF *TOF = new IlcTOFv6T0("TOF", "normal TOF");
}
if (iHMPID)
{
//=================== HMPID parameters ===========================
IlcHMPID *HMPID = new IlcHMPIDv3("HMPID", "normal HMPID");
}
if (iZDC)
{
//=================== ZDC parameters ============================
IlcZDC *ZDC = new IlcZDCv4("ZDC", "normal ZDC");
}
if (iTRD)
{
//=================== TRD parameters ============================
IlcTRD *TRD = new IlcTRDv1("TRD", "TRD slow simulator");
}
if (iFMD)
{
//=================== FMD parameters ============================
IlcFMD *FMD = new IlcFMDv1("FMD", "normal FMD");
}
if (iMUON)
{
//=================== MUON parameters ===========================
// New MUONv1 version (geometry defined via builders)
IlcMUON *MUON = new IlcMUONv1("MUON", "default");
}
if (iPHOS)
{
//=================== PHOS parameters ===========================
IlcPHOS *PHOS = new IlcPHOSv1("PHOS", "IHEP");
}
if (iPMD)
{
//=================== PMD parameters ============================
IlcPMD *PMD = new IlcPMDv1("PMD", "normal PMD");
}
if (iT0)
{
//=================== T0 parameters ============================
IlcT0 *T0 = new IlcT0v1("T0", "T0 Detector");
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
IlcEMCAL *EMCAL = new IlcEMCALv2("EMCAL", "EMCAL_COMPLETEV1");
}
if (iACORDE)
{
//=================== ACORDE parameters ============================
IlcACORDE *ACORDE = new IlcACORDEv1("ACORDE", "normal ACORDE");
}
if (iVZERO)
{
//=================== ACORDE parameters ============================
IlcVZERO *VZERO = new IlcVZEROv7("VZERO", "normal VZERO");
}
}
void Config()
{
// ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
// Theta range given through pseudorapidity limits 22/6/2001
// Set Random Number seed
gRandom->SetSeed(sseed);
cout<<"Seed for random number generation= "<<gRandom->GetSeed()<<endl;
// libraries required by geant321 and Pythia6
#if defined(__CINT__)
gSystem->Load("liblhapdf.so"); // Parton density functions
gSystem->Load("libEGPythia6.so"); // TGenerator interface
gSystem->Load("libpythia6.so"); // Pythia
gSystem->Load("libIlcPythia6.so"); // ILC specific implementations
gSystem->Load("libgeant321");
#endif
new TGeant3TGeo("C++ Interface to Geant3");
IlcRunLoader* rl=0x0;
cout<<"Config.C: Creating Run Loader ..."<<endl;
rl = IlcRunLoader::Open("gilc.root",
IlcConfig::GetDefaultEventFolderName(),
"recreate");
if (rl == 0x0)
{
gIlc->Fatal("Config.C","Can not instatiate the Run Loader");
return;
}
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(100);
gIlc->SetRunLoader(rl);
// Set the trigger configuration
IlcSimulation::Instance()->SetTriggerConfig(pprTrigConfName[strig]);
cout<<"Trigger configuration is set to "<<pprTrigConfName[strig]<<endl;
//
// Set External decayer
IlcDecayer *decayer = new IlcDecayerPythia();
decayer->SetForceDecay(kAll);
decayer->Init();
//forbid some decays
IlcPythia * py= IlcPythia::Instance();
py->SetMDME(737,1,0); //forbid D*+->D+ + pi0
py->SetMDME(738,1,0);//forbid D*+->D+ + gamma
for(Int_t d=747; d<=762; d++){
py->SetMDME(d,1,0);
}
for(Int_t d=764; d<=807; d++){
py->SetMDME(d,1,0);
}
gMC->SetExternalDecayer(decayer);
//
//
//=======================================================================
//
//=======================================================================
// ************* STEERING parameters FOR ILC SIMULATION **************
// --- Specify event type to be tracked through the ILC setup
// --- All positions are in cm, angles in degrees, and P and E in GeV
gMC->SetProcess("DCAY",1);
gMC->SetProcess("PAIR",1);
gMC->SetProcess("COMP",1);
gMC->SetProcess("PHOT",1);
gMC->SetProcess("PFIS",0);
gMC->SetProcess("DRAY",0);
gMC->SetProcess("ANNI",1);
gMC->SetProcess("BREM",1);
gMC->SetProcess("MUNU",1);
gMC->SetProcess("CKOV",1);
gMC->SetProcess("HADR",1);
gMC->SetProcess("LOSS",2);
gMC->SetProcess("MULS",1);
gMC->SetProcess("RAYL",1);
Float_t cut = 1.e-3; // 1MeV cut by default
Float_t tofmax = 1.e10;
gMC->SetCut("CUTGAM", cut);
gMC->SetCut("CUTELE", cut);
gMC->SetCut("CUTNEU", cut);
gMC->SetCut("CUTHAD", cut);
gMC->SetCut("CUTMUO", cut);
gMC->SetCut("BCUTE", cut);
gMC->SetCut("BCUTM", cut);
gMC->SetCut("DCUTE", cut);
gMC->SetCut("DCUTM", cut);
gMC->SetCut("PPCUTM", cut);
gMC->SetCut("TOFMAX", tofmax);
// Debug and log level
// IlcLog::SetGlobalDebugLevel(0);
// IlcLog::SetGlobalLogLevel(IlcLog::kError);
// Generator Configuration
IlcGenerator* gener = GeneratorFactory();
gener->SetOrigin(0, 0, 0); // vertex position
gener->SetSigma(0, 0, 5.3); // Sigma in (X,Y,Z) (cm) on IP position
gener->SetCutVertexZ(1.); // Truncate at 1 sigma
gener->SetVertexSmear(kPerEvent);
gener->SetTrackingFlag(1);
gener->Init();
if (smag == IlcMagF::k2kG) {
comment = comment.Append(" | L3 field 0.2 T");
} else if (smag == IlcMagF::k5kG) {
comment = comment.Append(" | L3 field 0.5 T");
}
if (srad == kGluonRadiation)
{
comment = comment.Append(" | Gluon Radiation On");
} else {
comment = comment.Append(" | Gluon Radiation Off");
}
printf("\n \n Comment: %s \n \n", comment.Data());
// Field (L3 0.4 T)
IlcMagF* field = new IlcMagF("Maps","Maps",-1., -1., smag);
TGeoGlobalMagField::Instance()->SetField(field);
rl->CdGAFile();
//
Int_t iABSO = 1;
Int_t iDIPO = 1;
Int_t iFMD = 1;
Int_t iFRAME = 1;
Int_t iHALL = 1;
Int_t iITS = 1;
Int_t iMAG = 1;
Int_t iMUON = 1;
Int_t iPHOS = 1;
Int_t iPIPE = 1;
Int_t iPMD = 1;
Int_t iHMPID = 1;
Int_t iSHIL = 1;
Int_t iT0 = 1;
Int_t iTOF = 1;
Int_t iTPC = 1;
Int_t iTRD = 1;
Int_t iZDC = 1;
Int_t iEMCAL = 1;
Int_t iVZERO = 1;
Int_t iACORDE = 0;
//=================== Ilc BODY parameters =============================
IlcBODY *BODY = new IlcBODY("BODY", "Ilc envelop");
if (iMAG)
{
//=================== MAG parameters ============================
// --- Start with Magnet since detector layouts may be depending ---
// --- on the selected Magnet dimensions ---
IlcMAG *MAG = new IlcMAG("MAG", "Magnet");
}
if (iABSO)
{
//=================== ABSO parameters ============================
IlcABSO *ABSO = new IlcABSOv3("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
IlcDIPO *DIPO = new IlcDIPOv3("DIPO", "Dipole version 3");
}
if (iHALL)
{
//=================== HALL parameters ============================
IlcHALL *HALL = new IlcHALLv3("HALL", "Ilc Hall");
}
if (iFRAME)
{
//=================== FRAME parameters ============================
IlcFRAMEv2 *FRAME = new IlcFRAMEv2("FRAME", "Space Frame");
FRAME->SetHoles(1);
}
if (iSHIL)
{
//=================== SHIL parameters ============================
IlcSHIL *SHIL = new IlcSHILv3("SHIL", "Shielding Version 3");
}
if (iPIPE)
{
//=================== PIPE parameters ============================
IlcPIPE *PIPE = new IlcPIPEv3("PIPE", "Beam Pipe");
}
if (iITS)
{
//=================== ITS parameters ============================
IlcITS *ITS = new IlcITSv11("ITS","ITS v11");
}
if (iTPC)
{
//============================ TPC parameters =====================
IlcTPC *TPC = new IlcTPCv2("TPC", "Default");
}
if (iTOF) {
//=================== TOF parameters ============================
IlcTOF *TOF = new IlcTOFv6T0("TOF", "normal TOF");
}
if (iHMPID)
{
//=================== HMPID parameters ===========================
IlcHMPID *HMPID = new IlcHMPIDv3("HMPID", "normal HMPID");
}
if (iZDC)
{
//=================== ZDC parameters ============================
IlcZDC *ZDC = new IlcZDCv4("ZDC", "normal ZDC");
}
if (iTRD)
{
//=================== TRD parameters ============================
IlcTRD *TRD = new IlcTRDv1("TRD", "TRD slow simulator");
}
if (iFMD)
{
//=================== FMD parameters ============================
IlcFMD *FMD = new IlcFMDv1("FMD", "normal FMD");
}
if (iMUON)
{
//=================== MUON parameters ===========================
// New MUONv1 version (geometry defined via builders)
IlcMUON *MUON = new IlcMUONv1("MUON", "default");
}
//=================== PHOS parameters ===========================
if (iPHOS)
{
IlcPHOS *PHOS = new IlcPHOSv1("PHOS", "IHEP");
}
if (iPMD)
{
//=================== PMD parameters ============================
IlcPMD *PMD = new IlcPMDv1("PMD", "normal PMD");
}
if (iT0)
{
//=================== T0 parameters ============================
IlcT0 *T0 = new IlcT0v1("T0", "T0 Detector");
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
IlcEMCAL *EMCAL = new IlcEMCALv2("EMCAL", "EMCAL_COMPLETEV1");
}
if (iACORDE)
{
//=================== ACORDE parameters ============================
IlcACORDE *ACORDE = new IlcACORDEv1("ACORDE", "normal ACORDE");
}
if (iVZERO)
{
//=================== VZERO parameters ============================
IlcVZERO *VZERO = new IlcVZEROv7("VZERO", "normal VZERO");
}
}