QRectF KisDuplicateOpSettings::paintOutlineRect(const QPointF& pos, KisImageSP image) const
{
KisBrushSP brush = m_optionsWidget->m_brushOption->brush();
QPointF hotSpot = brush->hotSpot(1.0, 1.0);
QRectF rect = image->pixelToDocument(QRect(0,0, brush->width(), brush->height()) );
rect.translate( pos - hotSpot + QPoint(1,1) );
rect |= duplicateOutlineRect(pos, image);
return rect;
}
void KisAutoBrushTest::testDabSize()
{
KisCircleMaskGenerator* circle = new KisCircleMaskGenerator(10, 0.5, 1.0, 1.0, 2, false);
KisBrushSP a = new KisAutoBrush(circle, 0.0, 0.0);
QCOMPARE(a->width(), 10);
QCOMPARE(a->height(), 5);
dabSizeHelper(a, "Identity", KisDabShape(), 10, 5);
dabSizeHelper(a, "Double", KisDabShape(2.0, 1.0, 0.0), 20, 10);
dabSizeHelper(a, "Halve", KisDabShape(0.5, 1.0, 0.0), 5, 3);
dabSizeHelper(a, "180 deg", KisDabShape(1.0, 1.0, M_PI), 10, 5);
dabSizeHelper(a, "90 deg", KisDabShape(1.0, 1.0, M_PI_2), 6, 10); // ceil rule
dabSizeHelper(a, "-90 deg", KisDabShape(1.0, 1.0, -M_PI_2), 6, 11); // ceil rule
dabSizeHelper(a, "45 deg", KisDabShape(1.0, 1.0, 0.25 * M_PI), 11, 11);
dabSizeHelper(a, "2x, 45d", KisDabShape(2.0, 1.0, 0.25 * M_PI), 22, 22);
dabSizeHelper(a, "0.5x, 45d", KisDabShape(0.5, 1.0, 0.25 * M_PI), 6, 6);
dabSizeHelper(a, "0.5x, 45d", KisDabShape(0.5, 1.0, 0.25 * M_PI), 6, 6);
dabSizeHelper(a, "0.5y", KisDabShape(1.0, 0.5, 0.0), 10, 5);
}
void KisDuplicateOpSettings::paintOutline(const QPointF& pos, KisImageSP image, QPainter &painter, const KoViewConverter &converter) const
{
KisBrushSP brush = m_optionsWidget->m_brushOption->brush();
QPointF hotSpot = brush->hotSpot(1.0, 1.0);
painter.setPen(Qt::black);
painter.setBackground(Qt::black);
painter.drawEllipse( converter.documentToView( image->pixelToDocument(QRect(0,0, brush->width(), brush->height()) ).translated( pos - hotSpot + QPoint(1,1) ) ) );
QRectF rect2 = converter.documentToView( duplicateOutlineRect( pos, image ) );
painter.drawLine(rect2.topLeft(), rect2.bottomRight() );
painter.drawLine(rect2.topRight(), rect2.bottomLeft() );
}
qreal KisFilterOp::paintAt(const KisPaintInformation& info)
{
if (!painter()) {
return 1.0;
}
if (!m_filter) {
return 1.0;
}
if (!source()) {
return 1.0;
}
KisBrushSP brush = m_brush;;
if (!brush) return 1.0;
if (! brush->canPaintFor(info))
return 1.0;
qreal scale = KisPaintOp::scaleForPressure(m_sizeOption.apply(info));
if ((scale * brush->width()) <= 0.01 || (scale * brush->height()) <= 0.01) return spacing(scale);
setCurrentScale(scale);
QPointF hotSpot = brush->hotSpot(scale, scale);
QPointF pt = info.pos() - hotSpot;
// Split the coordinates into integer plus fractional parts. The integer
// is where the dab will be positioned and the fractional part determines
// the sub-pixel positioning.
qint32 x;
qreal xFraction;
qint32 y;
qreal yFraction;
splitCoordinate(pt.x(), &x, &xFraction);
splitCoordinate(pt.y(), &y, &yFraction);
qint32 maskWidth = brush->maskWidth(scale, 0.0);
qint32 maskHeight = brush->maskHeight(scale, 0.0);
// Filter the paint device
m_filter->process(KisConstProcessingInformation(source(), QPoint(x, y)),
KisProcessingInformation(m_tmpDevice, QPoint(0, 0)),
QSize(maskWidth, maskHeight),
m_filterConfiguration, 0);
// Apply the mask on the paint device (filter before mask because edge pixels may be important)
KisFixedPaintDeviceSP fixedDab = new KisFixedPaintDevice(m_tmpDevice->colorSpace());
fixedDab->setRect(m_tmpDevice->extent());
fixedDab->initialize();
m_tmpDevice->readBytes(fixedDab->data(), fixedDab->bounds());
brush->mask(fixedDab, scale, scale, 0.0, info, xFraction, yFraction);
m_tmpDevice->writeBytes(fixedDab->data(), fixedDab->bounds());
if (!m_ignoreAlpha) {
KisHLineIteratorPixel itTmpDev = m_tmpDevice->createHLineIterator(0, 0, maskWidth);
KisHLineIteratorPixel itSrc = source()->createHLineIterator(x, y, maskWidth);
const KoColorSpace* cs = m_tmpDevice->colorSpace();
for (int y = 0; y < maskHeight; ++y) {
while (!itTmpDev.isDone()) {
quint8 alphaTmpDev = cs->opacityU8(itTmpDev.rawData());
quint8 alphaSrc = cs->opacityU8(itSrc.rawData());
cs->setOpacity(itTmpDev.rawData(), qMin(alphaTmpDev, alphaSrc), 1);
++itTmpDev;
++itSrc;
}
itTmpDev.nextRow();
itSrc.nextRow();
}
}
// Blit the paint device onto the layer
QRect dabRect = QRect(0, 0, maskWidth, maskHeight);
QRect dstRect = QRect(x, y, dabRect.width(), dabRect.height());
if (dstRect.isNull() || dstRect.isEmpty() || !dstRect.isValid()) return 1.0;
qint32 sx = dstRect.x() - x;
qint32 sy = dstRect.y() - y;
qint32 sw = dstRect.width();
qint32 sh = dstRect.height();
painter()->bitBlt(dstRect.x(), dstRect.y(), m_tmpDevice, sx, sy, sw, sh);
return spacing(scale);
}
