//////////////////////////////////////////////////////////////////////////////
// Does this base table have a supporting index on the MAV GroupBy columns?
// (Supporting index means that the MAV GroupBy columns must be a prefix
// of the index columns).
//////////////////////////////////////////////////////////////////////////////
NABoolean Refresh::doesBaseTableHaveSupportingIndex(BindWA *bindWA,
MVInfoForDML *mvInfo) const
{
CollIndex i;
LIST (MVUsedObjectInfo*)& UsedObjList = mvInfo->getUsedObjectsList();
MVUsedObjectInfo* pUsedTable = UsedObjList[0];
// Extract GroupBy columns
const MVColumns& pMvInfoColumnList =
mvInfo->getMVColumns();
LIST (MVColumnInfo *) mvGroupByColumns(bindWA->wHeap());
for ( i = 0 ; i < pMvInfoColumnList.entries() ; i++)
{
#pragma nowarn(1506) // warning elimination
MVColumnInfo *currentMvColInfo = pMvInfoColumnList[i];
#pragma warn(1506) // warning elimination
if (COM_MVCOL_GROUPBY == currentMvColInfo->getColType())
{
mvGroupByColumns.insert(currentMvColInfo);
}
}
// If the MAV does not have any group by columns - than there is
// no supporting index.
if (mvGroupByColumns.entries() == 0)
return FALSE;
// Get the NATable
QualifiedName underlyingTableName = pUsedTable->getObjectName();
CorrName corrTableName(underlyingTableName);
NATable * pNaTable = bindWA->getNATable(corrTableName, FALSE);
// Construct table GroupBy
NAColumnArray tableGroupByArray;
const NAColumnArray & columnArray = pNaTable->getNAColumnArray();
for ( i = 0 ; i < mvGroupByColumns.entries() ; i++)
{
Int32 tableColNum = (mvGroupByColumns)[i]->getOrigColNumber();
NAColumn * pColumn = columnArray.getColumn(tableColNum);
tableGroupByArray.insert(pColumn);
}
// Check the clustering Index.
const NAFileSet *pClusteringIndexFileSet = pNaTable->getClusteringIndex();
const NAColumnArray& ciColumns =
pClusteringIndexFileSet->getIndexKeyColumns();
if (TRUE == areGroupByColsAnIndexPrefix(tableGroupByArray, ciColumns))
{
return TRUE;
}
// Check any secondary indices.
const NAFileSetList & indexFileSetList = pNaTable->getIndexList();
for ( i = 0 ; i < indexFileSetList.entries() ; i++)
{
const NAFileSet *pSecondaryIndexFileSet = indexFileSetList[i];
const NAColumnArray& siColumns =
pSecondaryIndexFileSet->getIndexKeyColumns();
if (TRUE == areGroupByColsAnIndexPrefix(tableGroupByArray, siColumns))
{
return TRUE;
}
}
return FALSE;
}
Lng32 AddKeyGroups()
{
HSGlobalsClass *hs_globals = GetHSContext();
if (HSGlobalsClass::isHiveCat(hs_globals->objDef->getCatName()))
{
// HSHiveTableDef::getKeyList()/getIndexArray() not yet implemented.
*CmpCommon::diags() << DgSqlCode(-UERR_NO_ONEVERYKEY) << DgString0("hive");
return -1;
}
Lng32 retcode = 0;
Lng32 numColsInGroup = 0;
HSColumnStruct col;
NAString tempColList = "";
NAString tempCol;
NAString autoGroup;
ULng32 numKeys;
ULng32 i, j;
NATable* naTbl = hs_globals->objDef->getNATable();
HSLogMan *LM = HSLogMan::Instance();
// ----------------------------------------------------------
// Generate histograms for KEY
// ----------------------------------------------------------
// The clustering index is included in the list of indices returned by
// NATable::getIndexList(), so we store its pointer so we can skip it
// when the other indexes are processed below.
NAFileSet* clusteringIndex = naTbl->getClusteringIndex();
const NAColumnArray& keyCols = clusteringIndex->getIndexKeyColumns();
Lng32 colPos;
numKeys = keyCols.entries();
if (numKeys == 1) // SINGLE-COLUMN KEY
{
colPos = keyCols[0]->getPosition();
if (LM->LogNeeded())
{
sprintf(LM->msg, "\t\tKEY:\t\t(%s)", hs_globals->objDef->getColName(colPos));
LM->Log(LM->msg);
}
if (ColumnExists(colPos)) // avoid duplicates
{
LM->Log("\t\t** duplicate column group has been ignored.");
}
else // add to single-column group list
{
retcode = AddSingleColumn(colPos);
}
}
else if (numKeys > 1) // MULTI-COLUMN KEY
{
// Create multiple MC group(s) if numkeys > 1. Subset MC groups will
// also be created if numkeys > 2, E.g. If numkeys = 5, then
// MC groups with 5, 4, 3, and 2 columns will be created using
// the key columns. Note that if numkeys is larger than CQD
// USTAT_NUM_MC_GROUPS_FOR_KEYS (default = 5), then the number
// of groups created will be limited by this value. So, e.g. if
// numkeys = 10, then MC groups with 5, 4, 3, and 2 columns will
// be created (that is, 5 groups will be created - incl the single).
ULng32 minMCGroupSz = 2;
ULng32 maxMCGroups = (ULng32)
CmpCommon::getDefaultNumeric(USTAT_NUM_MC_GROUPS_FOR_KEYS);
// Generate no MCs with more cols than specified by the cqd.
if (numKeys > maxMCGroups)
numKeys = maxMCGroups;
// For salted table, generate only the longest MC for the key (subject
// to max cols determined above) unless a cqd is set to gen all MCs of
// allowable sizes.
if (CmpCommon::getDefault(USTAT_ADD_SALTED_KEY_PREFIXES_FOR_MC) == DF_OFF &&
hs_globals->objDef->getColNum("_SALT_", FALSE) >= 0)
minMCGroupSz = numKeys;
while (numKeys >= minMCGroupSz) // Create only MC groups not single cols
{
HSColSet colSet;
autoGroup = "(";
for (j = 0; j < numKeys; j++)
{
colPos = keyCols[j]->getPosition();
col = hs_globals->objDef->getColInfo(colPos);
col.colnum = colPos;
colSet.insert(col);
autoGroup += col.colname->data();
autoGroup += ",";
}
if (LM->LogNeeded())
{
autoGroup.replace(autoGroup.length()-1,1,")"); // replace comma with close parenthesis
sprintf(LM->msg, "\t\tKEY:\t\t%s", autoGroup.data());
LM->Log(LM->msg);
}
if (retcode = AddColumnSet(colSet))
{
HSHandleError(retcode);
}
numKeys--;
}
}
// ----------------------------------------------------------
// Generate histograms for all INDEXES
// ----------------------------------------------------------
const NAFileSetList& indexes = naTbl->getIndexList();
NAFileSet* index;
for (i = 0; i < indexes.entries(); i++ )
{
index = indexes[i];
if (index == clusteringIndex)
continue; // clustering index processed above already
const NAColumnArray& keyCols = index->getIndexKeyColumns();
numKeys = keyCols.entries();
if (numKeys == 1) // SINGLE-COLUMN INDEX
{
colPos = keyCols[0]->getPosition();
if (LM->LogNeeded())
{
sprintf(LM->msg, "\t\tINDEX[%d]\t(%s)", i,
hs_globals->objDef->getColName(colPos));
LM->Log(LM->msg);
}
if (ColumnExists(colPos)) // avoid duplicates
{
LM->Log("\t\t*** duplicate column group has been ignored.");
}
else // add to single-column group list
{
retcode = AddSingleColumn(colPos);
}
}
else // MULTI-COLUMN INDEX
{
// Create multiple MC group(s) if numkeys > 1. Subset MC groups will
// also be created if numkeys > 2, E.g. If numkeys = 5, then
// MC groups with 5, 4, 3, and 2 columns will be created using
// the key columns. Note that if numkeys is larger than CQD
// USTAT_NUM_MC_GROUPS_FOR_KEYS (default = 5), then the number
// of groups created will be limited by this value. So, e.g. if
// numkeys = 10, then MC groups with 10, 9, 8, 7, 6 columns will
// be created (that is, 5 groups will be created).
ULng32 minMCGroupSz = 2;
ULng32 maxMCGroups = (ULng32)
CmpCommon::getDefaultNumeric(USTAT_NUM_MC_GROUPS_FOR_KEYS);
if (numKeys > maxMCGroups)
minMCGroupSz = numKeys - maxMCGroups + 1;
while (numKeys >= minMCGroupSz) // MinMCGroupSz is greater than 1.
{
HSColSet colSet;
tempColList = "";
autoGroup = "(";
for (j = 0; j < numKeys; j++)
{
colPos = keyCols[j]->getPosition();
tempCol = ".";
tempCol += LongToNAString(colPos);
tempCol += ".";
// Eliminate duplicate columns in the index;
// They may have been introduced by appending the key to the specified index.
if (!tempColList.contains(tempCol))
{
col = hs_globals->objDef->getColInfo(colPos);
col.colnum = colPos;
colSet.insert((const struct HSColumnStruct) col);
tempColList += tempCol.data();
numColsInGroup++;
autoGroup += col.colname->data();
autoGroup += ",";
}
}
if (colSet.entries())
{
if (numColsInGroup > 1)
{
if (LM->LogNeeded())
{
autoGroup.replace(autoGroup.length()-1,1,")"); // replace comma with close parenthesis
sprintf(LM->msg, "\t\tINDEX[%d]\t%s", i, autoGroup.data());
LM->Log(LM->msg);
}
if (retcode = AddColumnSet(colSet))
{
HSHandleError(retcode);
}
}
numColsInGroup = 0;
}
numKeys--;
}
}
}
return retcode;
}