/*
* This is the real print function: print the active screen
*/
void BOARD_PRINTOUT_CONTROLER::DrawPage()
{
int tmpzoom;
wxPoint tmp_startvisu;
wxPoint old_org;
wxPoint DrawOffset; // Offset de trace
double userscale;
double DrawZoom = 1;
wxDC* dc = GetDC();
PCB_SCREEN* screen = (PCB_SCREEN*) m_Parent->GetScreen();
bool printMirror = m_PrintParams.m_PrintMirror;
wxBusyCursor dummy;
// Save old draw scale and draw offset
tmp_startvisu = screen->m_StartVisu;
tmpzoom = screen->GetZoom();
old_org = screen->m_DrawOrg;
// Change draw scale and offset to draw the whole page
screen->SetScalingFactor( DrawZoom );
screen->m_DrawOrg.x = screen->m_DrawOrg.y = 0;
screen->m_StartVisu.x = screen->m_StartVisu.y = 0;
PCB_BASE_FRAME* pcbframe = (PCB_BASE_FRAME*) m_Parent;
wxSize pageSizeIU = pcbframe->GetPageSizeIU(); // internal units
EDA_RECT bbbox = pcbframe->GetBoard()->ComputeBoundingBox();
// In module editor, the module is located at 0,0 but for printing
// it is moved to pageSizeIU.x/2, pageSizeIU.y/2.
// So the equivalent board must be moved:
if( m_Parent->IsType( MODULE_EDITOR_FRAME ) )
{
bbbox.Move( wxPoint( pageSizeIU.x/2, pageSizeIU.y/2 ) );
}
// Compute the PCB size in internal units
userscale = m_PrintParams.m_PrintScale;
if( userscale == 0 ) // fit in page
{
// Margin = 0.4 inch
#if defined(KICAD_NANOMETRE)
int extra_margin = int( 0.4 * 25400 ); // nanometers
#else
int extra_margin = int( 0.4 * 1000 ); // deci-mils
#endif
pageSizeIU.x = bbbox.GetWidth() + extra_margin * 2;
pageSizeIU.y = bbbox.GetHeight() + extra_margin * 2;
userscale = 0.99;
}
if( (m_PrintParams.m_PrintScale > 1.0) // scale > 1 -> Recadrage
|| (m_PrintParams.m_PrintScale == 0) ) // fit in page
{
DrawOffset += bbbox.Centre();
}
if( m_PrintParams.m_PageSetupData )
{
wxSize pagesize;
pagesize.x = int( pageSizeIU.x / userscale );
pagesize.y = int( pageSizeIU.y / userscale );
FitThisSizeToPageMargins( pagesize, *m_PrintParams.m_PageSetupData );
}
// Compute Accurate scale 1
if( userscale == 1.0 )
{
// We want a 1:1 scale and margins for printing
MapScreenSizeToPaper();
int w, h;
GetPPIPrinter( &w, &h );
double accurate_Xscale = ( (double) ( DrawZoom * w ) ) / (double) PCB_INTERNAL_UNIT;
double accurate_Yscale = ( (double) ( DrawZoom * h ) ) / (double) PCB_INTERNAL_UNIT;
if( IsPreview() ) // Scale must take in account the DC size in Preview
{
// Get the size of the DC in pixels
wxSize PlotAreaSize;
dc->GetSize( &PlotAreaSize.x, &PlotAreaSize.y );
GetPageSizePixels( &w, &h );
accurate_Xscale *= PlotAreaSize.x;
accurate_Xscale /= (double) w;
accurate_Yscale *= PlotAreaSize.y;
accurate_Yscale /= (double) h;
}
accurate_Xscale *= m_PrintParams.m_XScaleAdjust;
accurate_Yscale *= m_PrintParams.m_YScaleAdjust;
// Fine scale adjust
dc->SetUserScale( accurate_Xscale, accurate_Yscale );
}
// Get the final size of the DC in pixels
wxSize PlotAreaSizeInPixels;
dc->GetSize( &PlotAreaSizeInPixels.x, &PlotAreaSizeInPixels.y );
double scalex, scaley;
dc->GetUserScale(&scalex, &scaley);
wxSize PlotAreaSizeInUserUnits;
PlotAreaSizeInUserUnits.x = (int) (PlotAreaSizeInPixels.x/scalex);
PlotAreaSizeInUserUnits.y = (int) (PlotAreaSizeInPixels.y/scaley);
/* In some cases the plot origin is the centre of the page
* when:
* - Asked
* - scale > 1
* - fit in page
*/
if( m_PrintParams.m_ForceCentered
|| (m_PrintParams.m_PrintScale > 1.0) // scale > 1
|| (m_PrintParams.m_PrintScale == 0) ) // fit in page
{
DrawOffset.x -= PlotAreaSizeInUserUnits.x / 2;
DrawOffset.y -= PlotAreaSizeInUserUnits.y / 2;
}
screen->m_DrawOrg = DrawOffset;
GRResetPenAndBrush( dc );
if( m_PrintParams.m_Print_Black_and_White )
GRForceBlackPen( true );
EDA_DRAW_PANEL* panel = m_Parent->GetCanvas();
EDA_RECT tmp = *panel->GetClipBox();
// Set clip box to the max size
#define MAX_VALUE (INT_MAX/2) // MAX_VALUE is the max we can use in an integer
// and that allows calculations without overflow
panel->SetClipBox( EDA_RECT( wxPoint( 0, 0 ), wxSize( MAX_VALUE, MAX_VALUE ) ) );
m_Parent->GetScreen()->m_IsPrinting = true;
int bg_color = g_DrawBgColor;
if( m_PrintParams.m_Print_Sheet_Ref )
m_Parent->TraceWorkSheet( dc, screen, m_PrintParams.m_PenDefaultSize );
if( printMirror )
{
// To plot mirror, we reverse the y axis, and modify the plot y origin
dc->SetAxisOrientation( true, true );
if( userscale < 1.0 )
scaley /= userscale;
/* Plot offset y is moved by the y plot area size in order to have
* the old draw area in the new draw area, because the draw origin has not moved
* (this is the upper left corner) but the Y axis is reversed, therefore the plotting area
* is the y coordinate values from - PlotAreaSize.y to 0 */
int y_dc_offset = PlotAreaSizeInPixels.y;
y_dc_offset = (int) ( ( double ) y_dc_offset * userscale );
dc->SetDeviceOrigin( 0, y_dc_offset );
int ysize = (int) ( PlotAreaSizeInPixels.y / scaley );
DrawOffset.y += ysize;
/* in order to keep the board position in the sheet
* (when user scale <= 1) the y offset in moved by the distance between
* the middle of the page and the middle of the board
* This is equivalent to put the mirror axis to the board centre
* for scales > 1, the DrawOffset was already computed to have the board centre
* to the middle of the page.
*/
wxPoint pcb_centre = bbbox.Centre();
if( userscale <= 1.0 )
DrawOffset.y += pcb_centre.y - (ysize / 2);
dc->SetLogicalOrigin( screen->m_DrawOrg.x, screen->m_DrawOrg.y );
panel->SetClipBox( EDA_RECT( wxPoint( -MAX_VALUE/2, -MAX_VALUE/2 ),
panel->GetClipBox()->GetSize() ) );
}
g_DrawBgColor = WHITE;
/* when printing in color mode, we use the graphic OR mode that gives the same look as the screen
* But because the background is white when printing, we must use a trick:
* In order to plot on a white background in OR mode we must:
* 1 - Plot all items in black, this creates a local black backgroud
* 2 - Plot in OR mode on black "local" background
*/
if( !m_PrintParams.m_Print_Black_and_White )
{ // Creates a "local" black background
GRForceBlackPen( true );
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams );
GRForceBlackPen( false );
}
m_Parent->PrintPage( dc, m_PrintParams.m_PrintMaskLayer, printMirror, &m_PrintParams );
g_DrawBgColor = bg_color;
m_Parent->GetScreen()->m_IsPrinting = false;
panel->SetClipBox( tmp );
GRForceBlackPen( false );
screen->m_StartVisu = tmp_startvisu;
screen->m_DrawOrg = old_org;
screen->SetZoom( tmpzoom );
}
