ParameterSet* VectoredFeldmanCousins::getParameterSet( ParameterSet* inputSet, ResultParameterSet* inputResult )
{
// Model 1 nuisence parameters are not changed
if( nuisenceModel == 0 )
{
return new ParameterSet( *inputSet );
}
// Model 2 nuisence parameters are varied within 1 sigma of their true value
else if( nuisenceModel == 1 )
{
ParameterSet* tempSet = new ParameterSet( *inputSet );
vector<string> all_params = tempSet->GetAllNames();
for( vector<string>::iterator param_i = all_params.begin(); param_i != all_params.end(); ++param_i )
{
PhysicsParameter* thisParameter = tempSet->GetPhysicsParameter( *param_i );
ResultParameter* thisResult = inputResult->GetResultParameter( *param_i );
if( thisParameter->GetType() != "Fixed" && !thisResult->GetScanStatus() )
{
TRandom3* rand_gen = RapidFitRandom::GetRandomFunction();
double new_value = rand_gen->Gaus( thisResult->GetValue(), thisResult->GetError() );
thisParameter->SetBlindedValue( new_value );
thisParameter->SetStepSize( thisResult->GetError() );
}
}
return tempSet;
}
else
{
cout << endl << "\t\tUNKNOWN NUICENCE MODEL, NOT DOING ANTYTHING!!!!" << endl << endl;
nuisenceModel = 0;
return this->getParameterSet( inputSet, inputResult );
}
}
// Interface for internal calls
void ScanStudies::DoScan( MinimiserConfiguration * MinimiserConfig, FitFunctionConfiguration * FunctionConfig, ParameterSet* BottleParameters,
vector< PDFWithData* > BottleData, vector< ConstraintFunction* > BottleConstraints, ScanParam* Wanted_Param, FitResultVector* output_interface,
int OutputLevel, bool forceContinue )
{
FunctionConfig->SetIntegratorTest( false );
double uplim = Wanted_Param->GetMax();
double lolim = Wanted_Param->GetMin();
double npoints = Wanted_Param->GetPoints();
string scanName = Wanted_Param->GetName();
// cout << "Performing Scan for the parameter " << scanName << endl ;
// Get a pointer to the physics parameter to be scanned and fix it
// CAREFUL: this must be reset as it was at the end.
PhysicsParameter* scanParameter = NULL;
try{
scanParameter = BottleParameters->GetPhysicsParameter(scanName);
}
catch(...)
{
cerr << "Couldn't find Parameter: " << scanName << ". Can NOT perform scan!" << endl << endl;
exit(3763);
}
double originalValue = scanParameter->GetBlindedValue();
string originalType = scanParameter->GetType();
if( originalType == "Fixed" && fabs(uplim-lolim) < 1E-5 )
{
cerr << "Cannot Run a scan Using Parameter: " << scanName << endl;
exit(3764);
}
scanParameter->SetType( "Fixed" ) ;
BottleParameters->FloatedFirst();
scanParameter = BottleParameters->GetPhysicsParameter(scanName);
// Need to set up a loop , fixing the scan parameter at each point
double deltaScan=0.;
for( int si=0; si<int(npoints); ++si)
{
cout << "\n\nSINGLE SCAN NUMBER\t\t" << si+1 << "\t\tOF\t\t" <<int(npoints)<< endl<<endl;
// Set scan parameter value
if( int(npoints)!=1 ) deltaScan = (uplim-lolim) / (npoints-1.) ;
else deltaScan=0;
double scanVal = lolim+deltaScan*si;
// The FitFunction has the ability to change the content of the input ParameterSet by definition as it isn't defined as const
scanParameter = BottleParameters->GetPhysicsParameter(scanName);
scanParameter->SetBlindedValue( scanVal ) ;
cout << "Fitting at:\t" << scanName << "=" << setw(6) << scanVal << setw(6) << " " << "StepSize: " << deltaScan << endl;
output_interface->StartStopwatch();
FitResult* scanStepResult=NULL;
//BottleParameters->Print();
try{
// Use the SafeFit as this always returns something when a PDF has been written to throw not exit
// Do a scan point fit
//BottleParameters->Print();
scanStepResult = FitAssembler::DoSafeFit( MinimiserConfig, FunctionConfig, BottleParameters, BottleData, BottleConstraints, forceContinue, OutputLevel );
}
catch( int e )
{
cerr << "Caught Scan Error: " << e << endl;
exit(-987);
}
catch( ... )
{
cerr << "Caught Unknown Scan Error" << endl;
exit(-986);
}
int retries = 0;
int left_right = 1;
int wiggle_step_num = 0;
double scanVal_orig = scanVal;
double wiggle_step_size = deltaScan/20.;
while( scanStepResult->GetFitStatus() != 3 )
{
if( retries != 1 )
{
cout << "\n\t\t\tRETRYING FIT" << endl;
scanVal = scanVal_orig;
++retries;
}
else
{
if( int(wiggle_step_num/2)*2 == wiggle_step_num ) // Even
{
left_right = 1;
}
else // Odd
{
left_right = -1;
}
// remember 0/2 and 1/2 are both 0 as an integer
scanVal = scanVal_orig + (double)left_right * wiggle_step_size * (double)int((wiggle_step_num)/2 + 1);
cout << "\tStepping to: " << scanVal << " Retrying!" << endl;
++wiggle_step_num;
}
// Perform 10 steps either side of minima with 20th of the step size
// when more than 10 steps either side have strayed into next point on the scan
// This 'wiggle is only done in 1D here
if( wiggle_step_num >= 20 ) break;
scanParameter->SetBlindedValue( scanVal ) ;
output_interface->StartStopwatch();
scanStepResult = FitAssembler::DoSafeFit( MinimiserConfig, FunctionConfig, BottleParameters, BottleData, BottleConstraints, forceContinue, OutputLevel );
}
cout << "Fit Finished!\n" <<endl;
// THIS IS ALWAYS TRUE BY DEFINITION OF THE SCAN
string name = Wanted_Param->GetName();
string type = BottleParameters->GetPhysicsParameter( name )->GetType();
string unit = BottleParameters->GetPhysicsParameter( name )->GetUnit();
scanStepResult->GetResultParameterSet()->SetResultParameter( name, scanVal, scanVal, 0., scanVal, scanVal, type, unit );
vector<string> Fixed_List = BottleParameters->GetAllFixedNames();
vector<string> Fit_List = scanStepResult->GetResultParameterSet()->GetAllNames();
for( unsigned short int i=0; i < Fixed_List.size() ; ++i )
{
bool found=false;
for( unsigned short int j=0; j < Fit_List.size(); ++j )
{
if( Fit_List[j] == Fixed_List[i] )
{
found = true;
}
}
if( !found )
{
string fixed_type = BottleParameters->GetPhysicsParameter( Fixed_List[i] )->GetType();
string fixed_unit = BottleParameters->GetPhysicsParameter( Fixed_List[i] )->GetUnit();
double fixed_value = BottleParameters->GetPhysicsParameter( Fixed_List[i] )->GetValue();
scanStepResult->GetResultParameterSet()->ForceNewResultParameter( Fixed_List[i],
fixed_value, fixed_value, 0., fixed_value, fixed_value, fixed_type, fixed_unit );
}
}
scanStepResult->GetResultParameterSet()->GetResultParameter( scanName )->SetScanStatus( true );
ResultFormatter::ReviewOutput( scanStepResult );
output_interface->AddFitResult( scanStepResult );
}
// Reset the parameter as it was
scanParameter = BottleParameters->GetPhysicsParameter(scanName);
scanParameter->SetType( originalType ) ;
scanParameter->SetBlindedValue( originalValue ) ;
}
// Interface for internal calls
void ScanStudies::DoScan2D( MinimiserConfiguration * MinimiserConfig, FitFunctionConfiguration * FunctionConfig, ParameterSet* BottleParameters,
vector< PDFWithData* > BottleData, vector< ConstraintFunction* > BottleConstraints, pair<ScanParam*, ScanParam*> Param_Set,
vector<FitResultVector*>* output_interface, int OutputLevel, bool forceContinue )
{
FunctionConfig->SetIntegratorTest( false );
// vector<string> namez = BottleParameters->GetAllNames();
vector<string> result_names = BottleParameters->GetAllNames();
double uplim = Param_Set.first->GetMax();
double lolim = Param_Set.first->GetMin();
double npoints = Param_Set.first->GetPoints();
string scanName = Param_Set.first->GetName();
string scanName2 = Param_Set.second->GetName();
// Get a pointer to the physics parameter to be scanned and fix it
// CAREFUL: this must be reset as it was at the end.
PhysicsParameter* scanParameter = NULL;
try{
scanParameter = BottleParameters->GetPhysicsParameter(scanName);
}
catch(...)
{
cerr << "Couldn't find Parameter: " << scanName << ". Can NOT perform scan!" << endl << endl;
exit(3763);
}
double originalValue = scanParameter->GetBlindedValue( );
string originalType = scanParameter->GetType( );
if( originalType == "Fixed" && fabs(uplim-lolim) < 1E-5 )
{
cerr << "Cannot Run a scan Using Parameter: " << scanName << endl << endl;
exit(3764);
}
scanParameter->SetType( "Fixed" );
// Need to set up a loop , fixing the scan parameter at each point
double deltaScan=0.;
if( int(npoints) !=1 ) deltaScan = (uplim-lolim) / (npoints-1.) ;
else deltaScan=0.;
for( int si=0; si < int(npoints); ++si )
{
cout << "\n\n2DSCAN OUTER NUMBER\t\t" << si+1 << "\t\tOF\t\t" << int(npoints) <<endl<<endl;
FitResultVector* Returnable_Result = new FitResultVector( result_names );
// Set scan parameter value
double scanVal = lolim + si*deltaScan;
cout << "Fitting at:\t" << scanName << "=" << setw(6) << scanVal << setw(6) << " " << "StepSize: " << deltaScan << endl;
// The FitFunction has the ability to change the content of the input ParameterSet by definition as it isn't defined as const
scanParameter = BottleParameters->GetPhysicsParameter(scanName);
scanParameter->SetBlindedValue( scanVal );
// Do a scan point fit
ScanStudies::DoScan( MinimiserConfig, FunctionConfig, BottleParameters, BottleData, BottleConstraints, Param_Set.second, Returnable_Result, OutputLevel, forceContinue );
//
//
// Would be nice to add an additional wiggle here for the 2D as this would improve things at the usual cost
//
//
// THIS IS ALWAYS TRUE BY DEFINITION OF THE SCAN
string name = Param_Set.first->GetName();
string type = BottleParameters->GetPhysicsParameter( name )->GetType();
string unit = BottleParameters->GetPhysicsParameter( name )->GetUnit();
for( short int i=0; i < Returnable_Result->NumberResults(); ++i )
{
Returnable_Result->GetFitResult( i )->GetResultParameterSet()->SetResultParameter( name, scanVal, scanVal, 0., scanVal, scanVal, type, unit );
Returnable_Result->GetFitResult( i )->GetResultParameterSet()->GetResultParameter( scanName )->SetScanStatus( true );
}
output_interface->push_back( Returnable_Result );
}
//Reset the parameter as it was
scanParameter = BottleParameters->GetPhysicsParameter(scanName);
scanParameter->SetType( originalType ) ;
scanParameter->SetBlindedValue( originalValue ) ;
}