bool Connection::Inside(const QPoint &p)
{
int x=(n1->x+n2->x)/2;
int y=(n1->y+n2->y)/2;
return pow(p.x()-x,2)+pow(p.y()-y,2)<pow(15,2);
}
/**
* Converts screen to tile coordinates. Sub-tile return values are not
* supported by this renderer.
*/
QPointF HexagonalRenderer::screenToTileCoords(qreal x, qreal y) const
{
const RenderParams p(map());
if (p.staggerX)
x -= p.staggerEven ? p.tileWidth : p.sideOffsetX;
else
y -= p.staggerEven ? p.tileHeight : p.sideOffsetY;
// Start with the coordinates of a grid-aligned tile
QPoint referencePoint = QPoint(qFloor(x / (p.columnWidth * 2)),
qFloor(y / (p.rowHeight * 2)));
// Relative x and y position on the base square of the grid-aligned tile
const QVector2D rel(x - referencePoint.x() * (p.columnWidth * 2),
y - referencePoint.y() * (p.rowHeight * 2));
// Adjust the reference point to the correct tile coordinates
int &staggerAxisIndex = p.staggerX ? referencePoint.rx() : referencePoint.ry();
staggerAxisIndex *= 2;
if (p.staggerEven)
++staggerAxisIndex;
// Determine the nearest hexagon tile by the distance to the center
QVector2D centers[4];
if (p.staggerX) {
const int left = p.sideLengthX / 2;
const int centerX = left + p.columnWidth;
const int centerY = p.tileHeight / 2;
centers[0] = QVector2D(left, centerY);
centers[1] = QVector2D(centerX, centerY - p.rowHeight);
centers[2] = QVector2D(centerX, centerY + p.rowHeight);
centers[3] = QVector2D(centerX + p.columnWidth, centerY);
} else {
const int top = p.sideLengthY / 2;
const int centerX = p.tileWidth / 2;
const int centerY = top + p.rowHeight;
centers[0] = QVector2D(centerX, top);
centers[1] = QVector2D(centerX - p.columnWidth, centerY);
centers[2] = QVector2D(centerX + p.columnWidth, centerY);
centers[3] = QVector2D(centerX, centerY + p.rowHeight);
}
int nearest = 0;
qreal minDist = std::numeric_limits<qreal>::max();
for (int i = 0; i < 4; ++i) {
const QVector2D ¢er = centers[i];
const qreal dc = (center - rel).lengthSquared();
if (dc < minDist) {
minDist = dc;
nearest = i;
}
}
static const QPoint offsetsStaggerX[4] = {
QPoint( 0, 0),
QPoint(+1, -1),
QPoint(+1, 0),
QPoint(+2, 0),
};
static const QPoint offsetsStaggerY[4] = {
QPoint( 0, 0),
QPoint(-1, +1),
QPoint( 0, +1),
QPoint( 0, +2),
};
const QPoint *offsets = p.staggerX ? offsetsStaggerX : offsetsStaggerY;
return referencePoint + offsets[nearest];
}
// Apply a simple variant type to a DOM property
static bool applySimpleProperty(const QVariant &v, bool translateString, DomProperty *dom_prop)
{
switch (v.type()) {
case QVariant::String: {
DomString *str = new DomString();
str->setText(v.toString());
if (!translateString)
str->setAttributeNotr(QLatin1String("true"));
dom_prop->setElementString(str);
}
return true;
case QVariant::ByteArray:
dom_prop->setElementCstring(QString::fromUtf8(v.toByteArray()));
return true;
case QVariant::Int:
dom_prop->setElementNumber(v.toInt());
return true;
case QVariant::UInt:
dom_prop->setElementUInt(v.toUInt());
return true;
case QVariant::LongLong:
dom_prop->setElementLongLong(v.toLongLong());
return true;
case QVariant::ULongLong:
dom_prop->setElementULongLong(v.toULongLong());
return true;
case QVariant::Double:
dom_prop->setElementDouble(v.toDouble());
return true;
case QVariant::Bool:
dom_prop->setElementBool(v.toBool() ? QFormBuilderStrings::instance().trueValue : QFormBuilderStrings::instance().falseValue);
return true;
case QVariant::Char: {
DomChar *ch = new DomChar();
const QChar character = v.toChar();
ch->setElementUnicode(character.unicode());
dom_prop->setElementChar(ch);
}
return true;
case QVariant::Point: {
DomPoint *pt = new DomPoint();
const QPoint point = v.toPoint();
pt->setElementX(point.x());
pt->setElementY(point.y());
dom_prop->setElementPoint(pt);
}
return true;
case QVariant::PointF: {
DomPointF *ptf = new DomPointF();
const QPointF pointf = v.toPointF();
ptf->setElementX(pointf.x());
ptf->setElementY(pointf.y());
dom_prop->setElementPointF(ptf);
}
return true;
case QVariant::Color: {
DomColor *clr = new DomColor();
const QColor color = qvariant_cast<QColor>(v);
clr->setElementRed(color.red());
clr->setElementGreen(color.green());
clr->setElementBlue(color.blue());
const int alphaChannel = color.alpha();
if (alphaChannel != 255)
clr->setAttributeAlpha(alphaChannel);
dom_prop->setElementColor(clr);
}
return true;
case QVariant::Size: {
DomSize *sz = new DomSize();
const QSize size = v.toSize();
sz->setElementWidth(size.width());
sz->setElementHeight(size.height());
dom_prop->setElementSize(sz);
}
return true;
case QVariant::SizeF: {
DomSizeF *szf = new DomSizeF();
const QSizeF sizef = v.toSizeF();
szf->setElementWidth(sizef.width());
szf->setElementHeight(sizef.height());
dom_prop->setElementSizeF(szf);
}
return true;
case QVariant::Rect: {
DomRect *rc = new DomRect();
const QRect rect = v.toRect();
rc->setElementX(rect.x());
rc->setElementY(rect.y());
rc->setElementWidth(rect.width());
rc->setElementHeight(rect.height());
dom_prop->setElementRect(rc);
}
return true;
case QVariant::RectF: {
DomRectF *rcf = new DomRectF();
const QRectF rectf = v.toRectF();
rcf->setElementX(rectf.x());
rcf->setElementY(rectf.y());
rcf->setElementWidth(rectf.width());
rcf->setElementHeight(rectf.height());
dom_prop->setElementRectF(rcf);
}
return true;
case QVariant::Font: {
DomFont *fnt = new DomFont();
const QFont font = qvariant_cast<QFont>(v);
const uint mask = font.resolve();
if (mask & QFont::WeightResolved) {
fnt->setElementBold(font.bold());
fnt->setElementWeight(font.weight());
}
if (mask & QFont::FamilyResolved)
fnt->setElementFamily(font.family());
if (mask & QFont::StyleResolved)
fnt->setElementItalic(font.italic());
if (mask & QFont::SizeResolved)
fnt->setElementPointSize(font.pointSize());
if (mask & QFont::StrikeOutResolved)
fnt->setElementStrikeOut(font.strikeOut());
if (mask & QFont::UnderlineResolved)
fnt->setElementUnderline(font.underline());
if (mask & QFont::KerningResolved)
fnt->setElementKerning(font.kerning());
if (mask & QFont::StyleStrategyResolved) {
const QMetaEnum styleStrategy_enum = metaEnum<QAbstractFormBuilderGadget>("styleStrategy");
fnt->setElementStyleStrategy(QLatin1String(styleStrategy_enum.valueToKey(font.styleStrategy())));
}
dom_prop->setElementFont(fnt);
}
return true;
#ifndef QT_NO_CURSOR
case QVariant::Cursor: {
const QMetaEnum cursorShape_enum = metaEnum<QAbstractFormBuilderGadget>("cursorShape");
dom_prop->setElementCursorShape(QLatin1String(cursorShape_enum.valueToKey(qvariant_cast<QCursor>(v).shape())));
}
return true;
#endif
case QVariant::KeySequence: {
DomString *s = new DomString();
s->setText(qvariant_cast<QKeySequence>(v).toString(QKeySequence::PortableText));
dom_prop->setElementString(s);
}
return true;
case QVariant::Locale: {
DomLocale *dom = new DomLocale();
const QLocale locale = qvariant_cast<QLocale>(v);
const QMetaEnum language_enum = metaEnum<QAbstractFormBuilderGadget>("language");
const QMetaEnum country_enum = metaEnum<QAbstractFormBuilderGadget>("country");
dom->setAttributeLanguage(QLatin1String(language_enum.valueToKey(locale.language())));
dom->setAttributeCountry(QLatin1String(country_enum.valueToKey(locale.country())));
dom_prop->setElementLocale(dom);
}
return true;
case QVariant::SizePolicy: {
DomSizePolicy *dom = new DomSizePolicy();
const QSizePolicy sizePolicy = qvariant_cast<QSizePolicy>(v);
dom->setElementHorStretch(sizePolicy.horizontalStretch());
dom->setElementVerStretch(sizePolicy.verticalStretch());
const QMetaEnum sizeType_enum = metaEnum<QAbstractFormBuilderGadget>("sizeType");
dom->setAttributeHSizeType(QLatin1String(sizeType_enum.valueToKey(sizePolicy.horizontalPolicy())));
dom->setAttributeVSizeType(QLatin1String(sizeType_enum.valueToKey(sizePolicy.verticalPolicy())));
dom_prop->setElementSizePolicy(dom);
}
return true;
case QVariant::Date: {
DomDate *dom = new DomDate();
const QDate date = qvariant_cast<QDate>(v);
dom->setElementYear(date.year());
dom->setElementMonth(date.month());
dom->setElementDay(date.day());
dom_prop->setElementDate(dom);
}
return true;
case QVariant::Time: {
DomTime *dom = new DomTime();
const QTime time = qvariant_cast<QTime>(v);
dom->setElementHour(time.hour());
dom->setElementMinute(time.minute());
dom->setElementSecond(time.second());
dom_prop->setElementTime(dom);
}
return true;
case QVariant::DateTime: {
DomDateTime *dom = new DomDateTime();
const QDateTime dateTime = qvariant_cast<QDateTime>(v);
dom->setElementHour(dateTime.time().hour());
dom->setElementMinute(dateTime.time().minute());
dom->setElementSecond(dateTime.time().second());
dom->setElementYear(dateTime.date().year());
dom->setElementMonth(dateTime.date().month());
dom->setElementDay(dateTime.date().day());
dom_prop->setElementDateTime(dom);
}
return true;
case QVariant::Url: {
DomUrl *dom = new DomUrl();
const QUrl url = v.toUrl();
DomString *str = new DomString();
str->setText(url.toString());
dom->setElementString(str);
dom_prop->setElementUrl(dom);
}
return true;
case QVariant::StringList: {
DomStringList *sl = new DomStringList;
sl->setElementString(qvariant_cast<QStringList>(v));
dom_prop->setElementStringList(sl);
}
return true;
default:
break;
}
return false;
}
void IconWidget::drawSelection(QPainter& painter, QPoint selection)
{
QRect selectionRect = QRect(ICON_SIZE * selection.x(), ICON_SIZE * selection.y(), ICON_SIZE, ICON_SIZE);
painter.drawRect(selectionRect);
}
void HexagonalRenderer::drawGrid(QPainter *painter, const QRectF &exposed,
QColor gridColor) const
{
QRect rect = exposed.toAlignedRect();
if (rect.isNull())
return;
const RenderParams p(map());
// Determine the tile and pixel coordinates to start at
QPoint startTile = screenToTileCoords(rect.topLeft()).toPoint();
QPoint startPos = tileToScreenCoords(startTile).toPoint();
/* Determine in which half of the tile the top-left corner of the area we
* need to draw is. If we're in the upper half, we need to start one row
* up due to those tiles being visible as well. How we go up one row
* depends on whether we're in the left or right half of the tile.
*/
const bool inUpperHalf = rect.y() - startPos.y() < p.sideOffsetY;
const bool inLeftHalf = rect.x() - startPos.x() < p.sideOffsetX;
if (inUpperHalf)
startTile.ry()--;
if (inLeftHalf)
startTile.rx()--;
startTile.setX(qMax(0, startTile.x()));
startTile.setY(qMax(0, startTile.y()));
startPos = tileToScreenCoords(startTile).toPoint();
const QPoint oct[8] = {
QPoint(0, p.tileHeight - p.sideOffsetY),
QPoint(0, p.sideOffsetY),
QPoint(p.sideOffsetX, 0),
QPoint(p.tileWidth - p.sideOffsetX, 0),
QPoint(p.tileWidth, p.sideOffsetY),
QPoint(p.tileWidth, p.tileHeight - p.sideOffsetY),
QPoint(p.tileWidth - p.sideOffsetX, p.tileHeight),
QPoint(p.sideOffsetX, p.tileHeight)
};
QVector<QLine> lines;
lines.reserve(8);
gridColor.setAlpha(128);
QPen gridPen(gridColor);
gridPen.setCosmetic(true);
gridPen.setDashPattern(QVector<qreal>() << 2 << 2);
painter->setPen(gridPen);
if (p.staggerX) {
// Odd row shifting is applied in the rendering loop, so un-apply it here
if (p.doStaggerX(startTile.x()))
startPos.ry() -= p.rowHeight;
for (; startPos.x() <= rect.right() && startTile.x() < map()->width(); startTile.rx()++) {
QPoint rowTile = startTile;
QPoint rowPos = startPos;
if (p.doStaggerX(startTile.x()))
rowPos.ry() += p.rowHeight;
for (; rowPos.y() <= rect.bottom() && rowTile.y() < map()->height(); rowTile.ry()++) {
lines.append(QLine(rowPos + oct[1], rowPos + oct[2]));
lines.append(QLine(rowPos + oct[2], rowPos + oct[3]));
lines.append(QLine(rowPos + oct[3], rowPos + oct[4]));
const bool isStaggered = p.doStaggerX(startTile.x());
const bool lastRow = rowTile.y() == map()->height() - 1;
const bool lastColumn = rowTile.x() == map()->width() - 1;
const bool bottomLeft = rowTile.x() == 0 || (lastRow && isStaggered);
const bool bottomRight = lastColumn || (lastRow && isStaggered);
if (bottomRight)
lines.append(QLine(rowPos + oct[5], rowPos + oct[6]));
if (lastRow)
lines.append(QLine(rowPos + oct[6], rowPos + oct[7]));
if (bottomLeft)
lines.append(QLine(rowPos + oct[7], rowPos + oct[0]));
painter->drawLines(lines);
lines.resize(0);
rowPos.ry() += p.tileHeight + p.sideLengthY;
}
startPos.rx() += p.columnWidth;
}
} else {
// Odd row shifting is applied in the rendering loop, so un-apply it here
if (p.doStaggerY(startTile.y()))
startPos.rx() -= p.columnWidth;
for (; startPos.y() <= rect.bottom() && startTile.y() < map()->height(); startTile.ry()++) {
QPoint rowTile = startTile;
QPoint rowPos = startPos;
if (p.doStaggerY(startTile.y()))
rowPos.rx() += p.columnWidth;
for (; rowPos.x() <= rect.right() && rowTile.x() < map()->width(); rowTile.rx()++) {
lines.append(QLine(rowPos + oct[0], rowPos + oct[1]));
lines.append(QLine(rowPos + oct[1], rowPos + oct[2]));
lines.append(QLine(rowPos + oct[3], rowPos + oct[4]));
const bool isStaggered = p.doStaggerY(startTile.y());
const bool lastRow = rowTile.y() == map()->height() - 1;
const bool lastColumn = rowTile.x() == map()->width() - 1;
const bool bottomLeft = lastRow || (rowTile.x() == 0 && !isStaggered);
const bool bottomRight = lastRow || (lastColumn && isStaggered);
if (lastColumn)
lines.append(QLine(rowPos + oct[4], rowPos + oct[5]));
if (bottomRight)
lines.append(QLine(rowPos + oct[5], rowPos + oct[6]));
if (bottomLeft)
lines.append(QLine(rowPos + oct[7], rowPos + oct[0]));
painter->drawLines(lines);
lines.resize(0);
rowPos.rx() += p.tileWidth + p.sideLengthX;
}
startPos.ry() += p.rowHeight;
}
}
}
bool GroundPlaneGenerator::generateGroundPlaneUnit(const QString & boardSvg, QSizeF boardImageSize, const QString & svg, QSizeF copperImageSize,
QStringList & exceptions, QGraphicsItem * board, double res, const QString & color, const QString & layerName,
QPointF whereToStart, double blurBy)
{
double bWidth, bHeight;
QImage * image = generateGroundPlaneAux(boardSvg, boardImageSize, svg, copperImageSize, exceptions, board, res, bWidth, bHeight, blurBy);
if (image == NULL) return false;
QPoint s(qRound(res * (whereToStart.x() - board->pos().x()) / FSvgRenderer::printerScale()),
qRound(res * (whereToStart.y() - board->pos().y()) / FSvgRenderer::printerScale()));
QBitArray redMarker(image->height() * image->width(), false);
QRgb pixel = image->pixel(s);
int gray = QGRAY(pixel);
if (gray <= THRESHOLD) {
// starting off in bad territory
delete image;
return false;
}
// step 1 flood fill white to "red" (keep max locations)
int minY = image->height();
int maxY = 0;
int minX = image->width();
int maxX = 0;
QList<QPoint> stack;
stack << s;
while (stack.count() > 0) {
QPoint p = stack.takeFirst();
if (p.x() < 0) continue;
if (p.y() < 0) continue;
if (p.x() >= image->width()) continue;
if (p.y() >= image->height()) continue;
if (redMarker.testBit(OFFSET(p.x(), p.y(), image))) continue; // already been here
QRgb pixel = image->pixel(p);
int gray = QGRAY(pixel);
if (gray <= THRESHOLD) continue; // black; bail
redMarker.setBit(OFFSET(p.x(), p.y(), image), true);
if (p.x() > maxX) maxX = p.x();
if (p.x() < minX) minX = p.x();
if (p.y() > maxY) maxY = p.y();
if (p.y() < minY) minY = p.y();
stack.append(QPoint(p.x() - 1, p.y()));
stack.append(QPoint(p.x() + 1, p.y()));
stack.append(QPoint(p.x(), p.y() - 1));
stack.append(QPoint(p.x(), p.y() + 1));
}
//image->save("testPoly1.png");
// step 2 replace white with black
image->fill(0);
// step 3 replace "red" with white
for (int y = 0; y < image->height(); y++) {
for (int x = 0; x < image->width(); x++) {
if (redMarker.testBit(OFFSET(x, y, image))) {
image->setPixel(x, y, 1);
}
}
}
#ifndef QT_NO_DEBUG
image->save("testGroundPlaneUnit3.png");
#endif
scanImage(*image, bWidth, bHeight, GraphicsUtils::StandardFritzingDPI / res, res, color, layerName, true, res / 50, true, QSizeF(.05, .05), 1 / FSvgRenderer::printerScale(), QPointF(0,0));
delete image;
return true;
}
void QXcbCursor::setPos(const QPoint &pos)
{
QXcbVirtualDesktop *virtualDesktop = Q_NULLPTR;
queryPointer(connection(), &virtualDesktop, 0);
xcb_warp_pointer(xcb_connection(), XCB_NONE, virtualDesktop->root(), 0, 0, 0, 0, pos.x(), pos.y());
xcb_flush(xcb_connection());
}
void Window::updateMousePos(QPoint pos)
{
QString temp;
temp.sprintf("Current/Last Mouse Pos: (%d, %d)", pos.x(), pos.y());
statusBar->showMessage(temp);
}
int QgsMapCanvasSnapper::snapToBackgroundLayers( const QPoint& p, QList<QgsSnappingResult>& results, const QList<QgsPoint>& excludePoints )
{
const QgsPoint mapCoordPoint = mMapCanvas->mapSettings().mapToPixel().toMapCoordinates( p.x(), p.y() );
return snapToBackgroundLayers( mapCoordPoint, results, excludePoints );
}
void SingleCellViewGraphPanelPlotOverlayWidget::drawCoordinates(QPainter *pPainter,
const QPoint &pPoint,
const QColor &pBackgroundColor,
const QColor &pForegroundColor,
const Location &pLocation,
const bool &pCanMoveLocation)
{
// Retrieve the size of coordinates as they will appear on the screen,
// which means using the same font as the one used for the axes
// Note: normally, pPoint would be a QPointF, but we want the coordinates to
// be drawn relative to something (see paintEvent()) and the only way
// to guarantee that everything will be painted as expected is to use
// QPoint. Indeed, if we were to use QPointF, then QPainter would have
// to do some rouding and though everything should be fine (since we
// always add/subtract a rounded number), it happens that it's not
// always the case. Indeed, we should always have a gap of one pixel
// between the coordinates and pPoint, but it could happen that we
// have either no gap or one of two pixels...
pPainter->setFont(mOwner->axisFont(QwtPlot::xBottom));
QPointF point = mOwner->canvasPoint(pPoint, false);
QString coordinates = QString("X: %1\nY: %2").arg(QLocale().toString(point.x(), 'g', 15),
QLocale().toString(point.y(), 'g', 15));
QRect coordinatesRect = pPainter->boundingRect(qApp->desktop()->availableGeometry(), 0, coordinates);
// Determine where the coordinates and its background should be drawn
switch (pLocation) {
case TopLeft:
coordinatesRect.moveTo(pPoint.x()-coordinatesRect.width()-1,
pPoint.y()-coordinatesRect.height()-1);
break;
case TopRight:
coordinatesRect.moveTo(pPoint.x()+2,
pPoint.y()-coordinatesRect.height()-1);
break;
case BottomLeft:
coordinatesRect.moveTo(pPoint.x()-coordinatesRect.width()-1,
pPoint.y()+2);
break;
case BottomRight:
coordinatesRect.moveTo(pPoint.x()+2,
pPoint.y()+2);
break;
}
if (pCanMoveLocation) {
QwtScaleMap canvasMapX = mOwner->canvasMap(QwtPlot::xBottom);
QwtScaleMap canvasMapY = mOwner->canvasMap(QwtPlot::yLeft);
QPoint topLeftPoint = QPoint(canvasMapX.transform(mOwner->minX()),
canvasMapY.transform(mOwner->maxY()));
QPoint bottomRightPoint = QPoint(canvasMapX.transform(mOwner->maxX()),
canvasMapY.transform(mOwner->minY()));
if (coordinatesRect.top() < topLeftPoint.y())
coordinatesRect.moveTop(pPoint.y()+2);
else if (coordinatesRect.top()+coordinatesRect.height()-1 > bottomRightPoint.y())
coordinatesRect.moveTop(pPoint.y()-coordinatesRect.height()-1);
if (coordinatesRect.left() < topLeftPoint.x())
coordinatesRect.moveLeft(pPoint.x()+2);
else if (coordinatesRect.left()+coordinatesRect.width()-1 > bottomRightPoint.x())
coordinatesRect.moveLeft(pPoint.x()-coordinatesRect.width()-1);
// Note: the -1 for the else-if tests is because fillRect() below works
// on (0, 0; width-1, height-1)...
}
// Draw a filled rectangle to act as the background for the coordinates
// we are to show
pPainter->fillRect(coordinatesRect, pBackgroundColor);
// Draw the text for the coordinates, using a white pen
QPen pen = pPainter->pen();
pen.setColor(pForegroundColor);
pPainter->setPen(pen);
pPainter->drawText(coordinatesRect, coordinates);
}
void hrAdventureScreen::collect()
{
clearItems();
const QVector<hrTile> &tiles = isUnderground ? tilesUnderground : tilesGround;
QList<hrSceneObject> &objects = isUnderground ? objectsUnderground : objectsGround;
if (tiles.isEmpty())
return;
for (int i = viewport.width() - 1; i >= 0; i--)
for (int j = viewport.height() - 1; j >= 0; j--)
{
QPoint pos = coord::toPix(QPoint(i, j));
QPoint index = viewport.topLeft() + QPoint(i, j);
const hrTile &tile = tiles.at(index.y() * size.width() + index.x());
hrGraphicsItem item = itemsTerrain[tile.terrainId];
item.setCurFrame(tile.terrainFrame);
item.setMirror(tile.isTerrainHorizontal(), tile.isTerrainVertical());
item.setPoint(pos);
addItem(item);
if (tile.hasRiver())
{
hrGraphicsItem item = itemsRiver[tile.riverId];
item.setCurFrame(tile.riverFrame);
item.setMirror(tile.isRiverHorizontal(), tile.isRiverVertical());
item.setPoint(pos);
addItem(item);
}
if (tile.hasRoad())
{
drawRoad(tile, pos);
}
}
if (viewport.y() > 0)
{
for (int i = 0; i < viewport.width(); i++)
{
QPoint pos = coord::toPix(QPoint(i, -1));
QPoint index = viewport.topLeft() + QPoint(i, -1);
const hrTile &tile = tiles.at(index.y() * size.width() + index.x());
if (tile.hasRoad())
{
drawRoad(tile, pos);
}
}
}
QMutableListIterator<hrSceneObject> it(objects);
while (it.hasNext())
{
hrSceneObject &obj = it.next();
if (viewport.intersects(obj.getRect()))
{
QPoint pos = coord::toPix(obj.getPoint() - viewport.topLeft());
hrGraphicsItem item = itemsObject[obj.getId()];
item.setCurFrame(isAnimate ? obj.getNextFrame() : obj.getCurFrame());
item.setPoint(pos);
addItem(item);
}
}
isAnimate = false;
}
// QListView does item layout in a very inflexible way, so let's do our custom layout again.
// FIXME: this is very inefficient, but due to the design flaw of QListView, this is currently the only workaround.
void DesktopWindow::relayoutItems() {
loadItemPositions(); // something may have changed
// qDebug("relayoutItems()");
if(relayoutTimer_) {
// this slot might be called from the timer, so we cannot delete it directly here.
relayoutTimer_->deleteLater();
relayoutTimer_ = NULL;
}
QDesktopWidget* desktop = qApp->desktop();
int screen = 0;
int row = 0;
int rowCount = proxyModel_->rowCount();
for(;;) {
if(desktop->isVirtualDesktop()) {
if(screen >= desktop->numScreens())
break;
}else {
screen = screenNum_;
}
QRect workArea = desktop->availableGeometry(screen);
workArea.adjust(12, 12, -12, -12); // add a 12 pixel margin to the work area
// qDebug() << "workArea" << screen << workArea;
// FIXME: we use an internal class declared in a private header here, which is pretty bad.
QSize grid = listView_->gridSize();
QPoint pos = workArea.topLeft();
for(; row < rowCount; ++row) {
QModelIndex index = proxyModel_->index(row, 0);
int itemWidth = delegate_->sizeHint(listView_->getViewOptions(), index).width();
FmFileInfo* file = proxyModel_->fileInfoFromIndex(index);
QByteArray name = fm_file_info_get_name(file);
QHash<QByteArray, QPoint>::iterator it = customItemPos_.find(name);
if(it != customItemPos_.end()) { // the item has a custom position
QPoint customPos = *it;
// center the contents vertically
listView_->setPositionForIndex(customPos + QPoint((grid.width() - itemWidth) / 2, 0), index);
// qDebug() << "set custom pos:" << name << row << index << customPos;
continue;
}
// check if the current pos is alredy occupied by a custom item
bool used = false;
for(it = customItemPos_.begin(); it != customItemPos_.end(); ++it) {
QPoint customPos = *it;
if(QRect(customPos, grid).contains(pos)) {
used = true;
break;
}
}
if(used) { // go to next pos
--row;
}
else {
// center the contents vertically
listView_->setPositionForIndex(pos + QPoint((grid.width() - itemWidth) / 2, 0), index);
// qDebug() << "set pos" << name << row << index << pos;
}
// move to next cell in the column
pos.setY(pos.y() + grid.height() + listView_->spacing());
if(pos.y() + grid.height() > workArea.bottom() + 1) {
// if the next position may exceed the bottom of work area, go to the top of next column
pos.setX(pos.x() + grid.width() + listView_->spacing());
pos.setY(workArea.top());
// check if the new column exceeds the right margin of work area
if(pos.x() + grid.width() > workArea.right() + 1) {
if(desktop->isVirtualDesktop()) {
// in virtual desktop mode, go to next screen
++screen;
break;
}
}
}
}
if(row >= rowCount)
break;
}
}
void DiagramCanvas::paint_all( QRect& r )
{
int i;
QPainter p( &buffer );
QPen pen;
QBrush brush;
QPointArray a;
QColor color;
QRegion mask, crossing_disk;
set<double>::iterator dbl_it;
for ( i=0; i<crossingList.size(); ++i )
{
Crossing *c = crossingList[i];
c->under->underpasses.insert( c->under->underpasses.end(), c->position_on_understrand );
}
for ( i=0; i<edgeList.size(); ++i )
{
Edge *e = edgeList[i];
pen.setWidth( e->thickness );
pen.setColor( CANVAS );
p.setPen( pen );
QPoint v, v1, v2, p1, p2 ;
p1 = e->vertex[begin]->position;
p2 = e->vertex[end]->position;
p.drawLine( p1, p2 );
/*
if (e->edge_type==singular)
{
v = p1 - p2;
v1.setX( v.x() - v.y() );
v1.setY( v.x() + v.y() );
v2.setX( v.x() + v.y() );
v2.setY( -v.x() + v.y() );
v1 = 5 * v1 / sqrt( double (v1.x() * v1.x() + v1.y() * v1.y()) );
v2 = 5 * v2 / sqrt( double (v2.x() * v2.x() + v2.y() * v2.y()) );
v = v / 2;
pen.setWidth( ARROW );
p.setPen( pen );
p.drawLine( p2+v, p2+v1+v );
p.drawLine( p2+v, p2+v2+v );
}
*/
}
for ( i=0; i<edgeList.size(); ++i )
{
Edge *e = edgeList[i];
color = (e->edge_type == drilled) ? DRILLED : colorList[e->arc_id % 18 ];
pen.setWidth( e->thickness );
pen.setColor( color );
p.setPen( pen );
brush.setColor( color );
brush.setStyle( SolidPattern );
p.setBrush( brush );
if ( e->underpasses.size() > 0 )
{
p.setClipping( TRUE );
mask = QRegion( 0, 0, width(), height(), QRegion::Rectangle );
for ( dbl_it=e->underpasses.begin(); dbl_it!=e->underpasses.end(); ++dbl_it )
{
QPoint center = time_to_point( e, *dbl_it );
crossing_disk = QRegion( center.x()-7, center.y()-7, 14, 14 , QRegion::Ellipse );
mask -= crossing_disk;
}
p.setClipRegion( mask );
QPoint v, v1, v2, p1, p2 ;
p1 = e->vertex[begin]->position;
p2 = e->vertex[end]->position;
p.drawLine( p1, p2 );
/*
if (e->edge_type==singular)
{
v = p1 - p2;
v1.setX( v.x() - v.y() );
v1.setY( v.x() + v.y() );
v2.setX( v.x() + v.y() );
v2.setY( -v.x() + v.y() );
v1 = 5 * v1 / sqrt( double (v1.x() * v1.x() + v1.y() * v1.y()) );
v2 = 5 * v2 / sqrt( double (v2.x() * v2.x() + v2.y() * v2.y()) );
v = v / 2;
pen.setWidth( ARROW );
p.setPen( pen );
p.drawLine( p2+v, p2+v1+v );
p.drawLine( p2+v, p2+v2+v );
}
*/
p.setClipping( FALSE );
}
else
{
QPoint v, v1, v2, p1, p2 ;
p1 = e->vertex[begin]->position;
p2 = e->vertex[end]->position;
p.drawLine( p1, p2 );
/*
if (e->edge_type==singular)
{
v = p1 - p2;
v1.setX( v.x() - v.y() );
v1.setY( v.x() + v.y() );
v2.setX( v.x() + v.y() );
v2.setY( -v.x() + v.y() );
v1 = 5 * v1 / sqrt( double (v1.x() * v1.x() + v1.y() * v1.y()) );
v2 = 5 * v2 / sqrt( double (v2.x() * v2.x() + v2.y() * v2.y()) );
v = v / 2;
pen.setWidth( ARROW );
p.setPen( pen );
p.drawLine( p2+v, p2+v1+v );
p.drawLine( p2+v, p2+v2+v );
}
*/
}
e->underpasses.clear();
}
p.end();
bitBlt( this, r.x(), r.y(), &buffer, r.x(), r.y(), r.width(), r.height() );
}
void SurfaceRenderWidget::mouseMoveEvent( QMouseEvent *event )
{
if( !this->process_input_events )
return;
if( event->buttons() & Qt::LeftButton )
{
int x = event->x();
int y = event->y();
// rotate clipping object
GLdouble angle = sqrt( ( double ) ( last_point.y() - y ) * ( last_point.y() - y ) + ( last_point.x() - x ) * ( last_point.x() - x ) );
GLdouble axis_x = -( last_point.y() - y ) / angle;
GLdouble axis_y = -( last_point.x() - x ) / angle;
if( ( axis_x != 0 || axis_y != 0 ) && angle != 0 )
bbox_transform = GLMatrix<GLfloat>::identity().applyRotate( angle, axis_x, axis_y, 0.0 ) * bbox_transform;
}
else
{
QPoint diff = last_point - event->pos();
surface_transform = bbox_transform.inverse() * GLMatrix<GLfloat>().loadTranslate( -diff.x() / GLfloat( this->width() ), diff.y() / GLfloat( this->height() ), 0.0f ) * bbox_transform * surface_transform;
}
last_point = event->pos();
update();
}
/*! \reimp */
QAccessible::Relation QAccessibleWidget::relationTo(int child,
const QAccessibleInterface *other, int otherChild) const
{
Relation relation = Unrelated;
if (d->asking == this) // recursive call
return relation;
QObject *o = other ? other->object() : 0;
if (!o)
return relation;
QWidget *focus = widget()->focusWidget();
if (object() == focus && isAncestor(o, focus))
relation |= FocusChild;
QACConnectionObject *connectionObject = (QACConnectionObject*)object();
for (int sig = 0; sig < d->primarySignals.count(); ++sig) {
if (connectionObject->isSender(o, d->primarySignals.at(sig).toAscii())) {
relation |= Controller;
break;
}
}
// test for passive relationships.
// d->asking protects from endless recursion.
d->asking = this;
int inverse = other->relationTo(otherChild, this, child);
d->asking = 0;
if (inverse & Controller)
relation |= Controlled;
if (inverse & Label)
relation |= Labelled;
if(o == object()) {
if (child && !otherChild)
return relation | Child;
if (!child && otherChild)
return relation | Ancestor;
if (!child && !otherChild)
return relation | Self;
}
QObject *parent = object()->parent();
if (o == parent)
return relation | Child;
if (o->parent() == parent) {
relation |= Sibling;
QAccessibleInterface *sibIface = QAccessible::queryAccessibleInterface(o);
Q_ASSERT(sibIface);
QRect wg = rect(0);
QRect sg = sibIface->rect(0);
if (wg.intersects(sg)) {
QAccessibleInterface *pIface = 0;
sibIface->navigate(Ancestor, 1, &pIface);
if (pIface && !((sibIface->state(0) | state(0)) & Invisible)) {
int wi = pIface->indexOfChild(this);
int si = pIface->indexOfChild(sibIface);
if (wi > si)
relation |= QAccessible::Covers;
else
relation |= QAccessible::Covered;
}
delete pIface;
} else {
QPoint wc = wg.center();
QPoint sc = sg.center();
if (wc.x() < sc.x())
relation |= QAccessible::Left;
else if(wc.x() > sc.x())
relation |= QAccessible::Right;
if (wc.y() < sc.y())
relation |= QAccessible::Up;
else if (wc.y() > sc.y())
relation |= QAccessible::Down;
}
delete sibIface;
return relation;
}
if (isAncestor(o, object()))
return relation | Descendent;
if (isAncestor(object(), o))
return relation | Ancestor;
return relation;
}
void BleImageProcess::mouseMoveEvent(QMouseEvent *event)
{
if (!m_activePair) return;
QRect topLeftRect(m_activePair->rect.x(), m_activePair->rect.y(), 8, 8);
QRect bottomRightRect(m_activePair->rect.bottomRight().x() - 8, m_activePair->rect.bottomRight().y() - 8, 8, 8);
if (topLeftRect.contains(event->pos())) {
setCursor(Qt::SizeFDiagCursor);
} else if (bottomRightRect.contains(event->pos())) {
setCursor(Qt::SizeFDiagCursor);
} else if (m_activePair->rect.contains(event->pos())) {
setCursor(Qt::SizeAllCursor);
} else {
setCursor(Qt::ArrowCursor);
}
if (m_startResize) {
if (m_resizeFromTopLeft) {
m_activePair->rect.setTopLeft(event->pos());
}
if (m_resizeFromBottomRight){
m_activePair->rect.setBottomRight(event->pos());
}
}
if (m_startMove) {
QPoint diff = QPoint(event->pos().x() - m_lastMovePoint.x(), event->pos().y() - m_lastMovePoint.y());
int w = m_activePair->rect.width();
int h = m_activePair->rect.height();
m_activePair->rect.setTopLeft(QPoint(m_activePair->rect.x() + diff.x(), m_activePair->rect.y() + diff.y()));
m_activePair->rect.setWidth(w);
m_activePair->rect.setHeight(h);
}
if (m_startResize || m_startMove) {
updateSources();
}
update();
m_lastMovePoint = event->pos();
}
/*! \reimp */
int QAccessibleWidget::navigate(RelationFlag relation, int entry,
QAccessibleInterface **target) const
{
if (!target)
return -1;
*target = 0;
QObject *targetObject = 0;
QWidgetList childList = childWidgets(widget());
bool complexWidget = childList.size() < childCount();
switch (relation) {
// Hierarchical
case Self:
targetObject = object();
break;
case Child:
if (complexWidget) {
if (entry > 0 && entry <= childCount())
return entry;
return -1;
}else {
if (entry > 0 && childList.size() >= entry)
targetObject = childList.at(entry - 1);
}
break;
case Ancestor:
{
if (entry <= 0)
return -1;
targetObject = widget()->parentWidget();
int i;
for (i = entry; i > 1 && targetObject; --i)
targetObject = targetObject->parent();
if (!targetObject && i == 1)
targetObject = qApp;
}
break;
case Sibling:
{
QAccessibleInterface *iface = QAccessible::queryAccessibleInterface(parentObject());
if (!iface)
return -1;
iface->navigate(Child, entry, target);
delete iface;
if (*target)
return 0;
}
break;
// Geometrical
case QAccessible::Left:
if (complexWidget && entry) {
if (entry < 2 || widget()->height() > widget()->width() + 20) // looks vertical
return -1;
return entry - 1;
}
// fall through
case QAccessible::Right:
if (complexWidget && entry) {
if (entry >= childCount() || widget()->height() > widget()->width() + 20) // looks vertical
return -1;
return entry + 1;
}
// fall through
case QAccessible::Up:
if (complexWidget && entry) {
if (entry < 2 || widget()->width() > widget()->height() + 20) // looks horizontal
return - 1;
return entry - 1;
}
// fall through
case QAccessible::Down:
if (complexWidget && entry) {
if (entry >= childCount() || widget()->width() > widget()->height() + 20) // looks horizontal
return - 1;
return entry + 1;
} else {
QAccessibleInterface *pIface = QAccessible::queryAccessibleInterface(parentObject());
if (!pIface)
return -1;
QRect startg = rect(0);
QPoint startc = startg.center();
QAccessibleInterface *candidate = 0;
int mindist = 100000;
int sibCount = pIface->childCount();
for (int i = 0; i < sibCount; ++i) {
QAccessibleInterface *sibling = 0;
pIface->navigate(Child, i+1, &sibling);
Q_ASSERT(sibling);
if ((relationTo(0, sibling, 0) & Self) || (sibling->state(0) & QAccessible::Invisible)) {
//ignore ourself and invisible siblings
delete sibling;
continue;
}
QRect sibg = sibling->rect(0);
QPoint sibc = sibg.center();
QPoint sibp;
QPoint startp;
QPoint distp;
switch (relation) {
case QAccessible::Left:
startp = QPoint(startg.left(), startg.top() + startg.height() / 2);
sibp = QPoint(sibg.right(), sibg.top() + sibg.height() / 2);
if (QPoint(sibc - startc).x() >= 0) {
delete sibling;
continue;
}
distp = sibp - startp;
break;
case QAccessible::Right:
startp = QPoint(startg.right(), startg.top() + startg.height() / 2);
sibp = QPoint(sibg.left(), sibg.top() + sibg.height() / 2);
if (QPoint(sibc - startc).x() <= 0) {
delete sibling;
continue;
}
distp = sibp - startp;
break;
case QAccessible::Up:
startp = QPoint(startg.left() + startg.width() / 2, startg.top());
sibp = QPoint(sibg.left() + sibg.width() / 2, sibg.bottom());
if (QPoint(sibc - startc).y() >= 0) {
delete sibling;
continue;
}
distp = sibp - startp;
break;
case QAccessible::Down:
startp = QPoint(startg.left() + startg.width() / 2, startg.bottom());
sibp = QPoint(sibg.left() + sibg.width() / 2, sibg.top());
if (QPoint(sibc - startc).y() <= 0) {
delete sibling;
continue;
}
distp = sibp - startp;
break;
default:
break;
}
int dist = (int)qSqrt((qreal)distp.x() * distp.x() + distp.y() * distp.y());
if (dist < mindist) {
delete candidate;
candidate = sibling;
mindist = dist;
} else {
delete sibling;
}
}
delete pIface;
*target = candidate;
if (*target)
return 0;
}
break;
case Covers:
if (entry > 0) {
QAccessibleInterface *pIface = QAccessible::queryAccessibleInterface(parentObject());
if (!pIface)
return -1;
QRect r = rect(0);
int sibCount = pIface->childCount();
QAccessibleInterface *sibling = 0;
for (int i = pIface->indexOfChild(this) + 1; i <= sibCount && entry; ++i) {
pIface->navigate(Child, i, &sibling);
if (!sibling || (sibling->state(0) & Invisible)) {
delete sibling;
sibling = 0;
continue;
}
if (sibling->rect(0).intersects(r))
--entry;
if (!entry)
break;
delete sibling;
sibling = 0;
}
delete pIface;
*target = sibling;
if (*target)
return 0;
}
break;
case Covered:
if (entry > 0) {
QAccessibleInterface *pIface = QAccessible::queryAccessibleInterface(parentObject());
if (!pIface)
return -1;
QRect r = rect(0);
int index = pIface->indexOfChild(this);
QAccessibleInterface *sibling = 0;
for (int i = 1; i < index && entry; ++i) {
pIface->navigate(Child, i, &sibling);
Q_ASSERT(sibling);
if (!sibling || (sibling->state(0) & Invisible)) {
delete sibling;
sibling = 0;
continue;
}
if (sibling->rect(0).intersects(r))
--entry;
if (!entry)
break;
delete sibling;
sibling = 0;
}
delete pIface;
*target = sibling;
if (*target)
return 0;
}
break;
// Logical
case FocusChild:
{
if (widget()->hasFocus()) {
targetObject = object();
break;
}
QWidget *fw = widget()->focusWidget();
if (!fw)
return -1;
if (isAncestor(widget(), fw) || fw == widget())
targetObject = fw;
/* ###
QWidget *parent = fw;
while (parent && !targetObject) {
parent = parent->parentWidget();
if (parent == widget())
targetObject = fw;
}
*/
}
break;
case Label:
if (entry > 0) {
QAccessibleInterface *pIface = QAccessible::queryAccessibleInterface(parentObject());
if (!pIface)
return -1;
// first check for all siblings that are labels to us
// ideally we would go through all objects and check, but that
// will be too expensive
int sibCount = pIface->childCount();
QAccessibleInterface *candidate = 0;
for (int i = 0; i < sibCount && entry; ++i) {
const int childId = pIface->navigate(Child, i+1, &candidate);
Q_ASSERT(childId >= 0);
if (childId > 0)
candidate = pIface;
if (candidate->relationTo(childId, this, 0) & Label)
--entry;
if (!entry)
break;
if (candidate != pIface)
delete candidate;
candidate = 0;
}
if (!candidate) {
if (pIface->relationTo(0, this, 0) & Label)
--entry;
if (!entry)
candidate = pIface;
}
if (pIface != candidate)
delete pIface;
*target = candidate;
if (*target)
return 0;
}
break;
case Labelled: // only implemented in subclasses
break;
case Controller:
if (entry > 0) {
// check all senders we are connected to,
// and figure out which one are controllers to us
QACConnectionObject *connectionObject = (QACConnectionObject*)object();
QObjectList allSenders = connectionObject->senderList();
QObjectList senders;
for (int s = 0; s < allSenders.size(); ++s) {
QObject *sender = allSenders.at(s);
QAccessibleInterface *candidate = QAccessible::queryAccessibleInterface(sender);
if (!candidate)
continue;
if (candidate->relationTo(0, this, 0)&Controller)
senders << sender;
delete candidate;
}
if (entry <= senders.size())
targetObject = senders.at(entry-1);
}
break;
case Controlled:
if (entry > 0) {
QObjectList allReceivers;
QACConnectionObject *connectionObject = (QACConnectionObject*)object();
for (int sig = 0; sig < d->primarySignals.count(); ++sig) {
QObjectList receivers = connectionObject->receiverList(d->primarySignals.at(sig).toAscii());
allReceivers += receivers;
}
if (entry <= allReceivers.size())
targetObject = allReceivers.at(entry-1);
}
break;
default:
break;
}
*target = QAccessible::queryAccessibleInterface(targetObject);
return *target ? 0 : -1;
}
void RtKeyboard::MouseFuncPress(int iPressY,int iIndex)
{
iPressY = 0;
QPoint keyOffset = QPoint(-10,-60);
QRect rectPressBtn = m_pFuncButton[iIndex]->geometry();
QString strKey;
QRect rectBtnText = QRect(18,16,15,15);
//Delete the Select Key, if it is exist.
if(m_pSelectKey) {
delete m_pSelectKey;
m_pSelectKey = NULL;
}
QWidget *parent = (QWidget*)this->parent();
if(parent == NULL)
parent = this;
strKey = m_pFuncButton[iIndex]->text();
QRect rectKeyboard = this->geometry();
int iSrcWidth = rectKeyboard.x()+rectPressBtn.x()+keyOffset.x();
int iSrcHeight = rectKeyboard.y()+rectPressBtn.y()+keyOffset.y();
m_pSelectKey = new RtKeyButton(parent);
if(iIndex == __FUN_KEY_0__)
{
m_pSelectKey->SetImages(&m_Key4[1],&m_Key4[1]);
m_pSelectKey->setGeometry(iSrcWidth,iSrcHeight,m_Key4[1].width(),m_Key4[1].height());
}
else if(iIndex == __FUN_KEY_1__)//Function Key #1
{
m_pSelectKey->SetImages(&m_Key_Switch[1],&m_Key_Switch[1]);
m_pSelectKey->setGeometry(iSrcWidth,iSrcHeight,m_Key_Switch[1].width(),m_Key_Switch[1].height());
}
else if(iIndex == __FUN_KEY_2__)//Function Key #2
{
QRect rectFun2Text = QRect(18,16,30,15);
m_pSelectKey->setButtonText(strKey,rectFun2Text);
m_pSelectKey->SetImages(&m_Key_Del[1],&m_Key_Del[1]);
m_pSelectKey->setGeometry(iSrcWidth,iSrcHeight,m_Key_Del[1].width(),m_Key_Del[1].height());
}
else if(iIndex == __FUN_KEY_3__)//Function Key #3
{
QRect rectFun3Text = QRect(14,16,35,15);
m_pSelectKey->SetImages(&m_Key7[1],&m_Key7[1]);
m_pSelectKey->setGeometry(iSrcWidth,iSrcHeight,m_Key7[1].width(),m_Key7[1].height());
m_pSelectKey->setButtonText(strKey,rectFun3Text);
}
else if(iIndex == __FUN_KEY_4__)//Function Key #4
{
QRect rectFun4Text = QRect(18,16,30,15);
m_pSelectKey->SetImages(&m_Key_Enter[1],&m_Key_Enter[1]);
m_pSelectKey->setGeometry(iSrcWidth,iSrcHeight,m_Key_Enter[1].width(),m_Key_Enter[1].height());
m_pSelectKey->setButtonText(strKey,rectFun4Text);
}
else if(iIndex == __FUN_KEY_5__)//Function Key #5
{
m_pSelectKey->SetImages(&m_Key3[1],&m_Key3[1]);
m_pSelectKey->setGeometry(iSrcWidth,iSrcHeight,m_Key3[1].width(),m_Key3[1].height());
m_pSelectKey->setButtonText(strKey,rectBtnText);
}
else if(iIndex == __FUN_KEY_6__)//Function Key #6
{
m_pSelectKey->SetImages(&m_Key3[1],&m_Key3[1]);
m_pSelectKey->setGeometry(iSrcWidth,iSrcHeight,m_Key3[1].width(),m_Key3[1].height());
m_pSelectKey->setButtonText(strKey,rectBtnText);
}
m_pSelectKey->setAlignStyle(RtKeyButton::AlignCenter);
m_pSelectKey->setEnabled(false);
m_pSelectKey->show();
}
void MediaSourceDesktop::CreateScreenshot()
{
AVFrame *tRGBFrame;
int tCaptureResX = mSourceResX;
int tCaptureResY = mSourceResY;
mMutexGrabberActive.lock();
// LOG(LOG_VERBOSE, "Source: %d * %d", mSourceResX, mSourceResY);
// LOG(LOG_VERBOSE, "Target: %d * %d", mTargetResX, mTargetResY);
if (!mMediaSourceOpened)
{
mMutexGrabberActive.unlock();
return;
}
if (mWidget == NULL)
{
LOG(LOG_ERROR, "Capture widget is invalid");
mMutexGrabberActive.unlock();
return;
}
QTime tCurrentTime = QTime::currentTime();
int tTimeDiff = mLastTimeGrabbed.msecsTo(tCurrentTime);
//### skip capturing when we are too slow
if (tTimeDiff < 1000 / (mInputFrameRate + 0.5 /* some tolerance! */))
{
#ifdef MSD_DEBUG_PACKETS
LOG(LOG_VERBOSE, "Screen capturing skipped because system is too fast");
#endif
mMutexGrabberActive.unlock();
return;
}
if (mLastTimeGrabbed == QTime(0, 0, 0, 0))
{
mLastTimeGrabbed = tCurrentTime;
mMutexGrabberActive.unlock();
return;
}else
mLastTimeGrabbed = tCurrentTime;
//### skip capturing when we are too slow
if (tTimeDiff > 1000 / MIN_GRABBING_FPS)
{
LOG(LOG_WARN, "Screen capturing skipped because system is too busy");
mMutexGrabberActive.unlock();
return;
}
//####################################################################
//### AUTO DESKTOP
//####################################################################
QDesktopWidget *tDesktop = QApplication::desktop();
if (mAutoDesktop)
{
tCaptureResX = tDesktop->availableGeometry(tDesktop->primaryScreen()).width();
tCaptureResY = tDesktop->availableGeometry(tDesktop->primaryScreen()).height();
}
if (mAutoScreen)
{
#ifdef APPLE
tCaptureResX = CGDisplayPixelsWide(CGMainDisplayID());
tCaptureResY = CGDisplayPixelsHigh(CGMainDisplayID());
#else
tCaptureResX = tDesktop->screenGeometry(tDesktop->primaryScreen()).width();
tCaptureResY = tDesktop->screenGeometry(tDesktop->primaryScreen()).height();
#endif
}
//####################################################################
//### GRABBING
//####################################################################
QPixmap tSourcePixmap;
// screen capturing
#if !defined(APPLE) || defined(HOMER_QT5)
tSourcePixmap = QPixmap::grabWindow(mWidget->winId(), mGrabOffsetX, mGrabOffsetY, tCaptureResX, tCaptureResY);
#else
CGImageRef tOSXWindowImage = CGWindowListCreateImage(CGRectInfinite, kCGWindowListOptionOnScreenOnly, mWidget->winId(), kCGWindowImageDefault);
tSourcePixmap = QPixmap::fromMacCGImageRef(tOSXWindowImage).copy(mGrabOffsetX, mGrabOffsetY, tCaptureResX, tCaptureResY);
CGImageRelease(tOSXWindowImage);
#endif
//####################################################################
//### SCALING to source resolution
//####################################################################
if ((tSourcePixmap.width() != mSourceResX) || (tSourcePixmap.height() != mSourceResY))
{// we have to adapt the assumed source resolution
//LOG(LOG_VERBOSE, "Have to rescale from %d*%d to %d*%d", tSourcePixmap.width(), tSourcePixmap.height(), mSourceResX, mSourceResY);
tSourcePixmap = tSourcePixmap.scaled(mSourceResX, mSourceResY);
}
//####################################################################
//### MOUSE VISUALIZATION
//####################################################################
if (mMouseVisualization)
{
QPoint tMousePos = QCursor::pos();
if ((tMousePos.x() < tSourcePixmap.width()) && (tMousePos.y() < tSourcePixmap.height()))
{// mouse is in visible area
int tMousePosInSourcePixmapX = mSourceResX * tMousePos.x() / tCaptureResX;
int tMousePosInSourcePixmapY = mSourceResY * tMousePos.y() / tCaptureResY;
//LOG(LOG_VERBOSE, "Mouse position: %d*%d", tMousePosInSourcePixmapX, tMousePosInSourcePixmapY);
QPainter *tPainter = new QPainter(&tSourcePixmap);
//TODO: add support for click visualization
tPainter->drawPixmap(tMousePosInSourcePixmapX, tMousePosInSourcePixmapY, QPixmap(":/images/MouseBlack.png").scaled(16, 32));
delete tPainter;
}
}
if(!tSourcePixmap.isNull())
{
// record screenshot via ffmpeg
if (mRecording)
{
if ((tRGBFrame = AllocFrame()) == NULL)
{
LOG(LOG_ERROR, "Unable to allocate memory for RGB frame");
}else
{
QImage tSourceImage = QImage((unsigned char*)mOriginalScreenshot, mSourceResX, mSourceResY, QImage::Format_RGB32);
QPainter *tSourcePainter = new QPainter(&tSourceImage);
tSourcePainter->drawPixmap(0, 0, tSourcePixmap);
delete tSourcePainter;
// Assign appropriate parts of buffer to image planes in tRGBFrame
FillFrame(tRGBFrame, mOriginalScreenshot, PIX_FMT_RGB32, mSourceResX, mSourceResY);
// set frame number in corresponding entries within AVFrame structure
tRGBFrame->pts = mRecorderChunkNumber;
tRGBFrame->coded_picture_number = mRecorderChunkNumber;
tRGBFrame->display_picture_number = mRecorderChunkNumber;
mRecorderChunkNumber++;
// emulate set FPS
tRGBFrame->pts = GetPtsFromFpsEmulator();
// re-encode the frame and write it to file
RecordFrame(tRGBFrame);
}
}
// lock screenshot buffer
mMutexScreenshot.lock();
if (mOutputScreenshot == NULL)
{
LOG(LOG_ERROR, "Invalid screenshot buffer: %p %d*%d", mOutputScreenshot, mTargetResX, mTargetResY);
mMutexScreenshot.unlock();
mMutexGrabberActive.unlock();
return;
}
int tTargetResX = mTargetResX;
if (tTargetResX > MAX_WIDTH)
tTargetResX = MAX_WIDTH;
int tTargetResY = mTargetResY;
if (tTargetResY > MAX_HEIGHT)
tTargetResY = MAX_HEIGHT;
QImage tTargetImage = QImage((unsigned char*)mOutputScreenshot, tTargetResX, tTargetResY, QImage::Format_RGB32);
QPainter *tTargetPainter = new QPainter(&tTargetImage);
QPixmap tScaledSourcePixmap = tSourcePixmap.scaled(tTargetResX, tTargetResY);
tTargetPainter->drawPixmap(0, 0, tScaledSourcePixmap);
delete tTargetPainter;
RelayChunkToMediaFilters((char*)mOutputScreenshot, tTargetResX * tTargetResY * MSD_BYTES_PER_PIXEL, 1);
mScreenshotUpdated = true;
// notify consumer about new screenshot
mWaitConditionScreenshotUpdated.wakeAll();
// unlock screenshot buffer again
mMutexScreenshot.unlock();
}else
LOG(LOG_ERROR, "Source pixmap is invalid");
mMutexGrabberActive.unlock();
}
void RtKeyboard::MousePress(int iPressY,int iIndex)
{
iPressY = 0;
QPoint keyOffset = QPoint( -10,-60);
QRect rectBtnText = QRect(18,16,15,15);
QString strKey;
QRect rectPressBtn;
if(m_KeypadFlag == KEYPAD_AZ)
rectPressBtn = m_pKeyButton[iIndex]->geometry();
else if(m_KeypadFlag == KEYPAD_09)
rectPressBtn = m_pNumberButton[iIndex]->geometry();
//Delete the Select Key, if it is exist.
if(m_pSelectKey) {
delete m_pSelectKey;
m_pSelectKey = NULL;
}
QWidget *parent = (QWidget*)this->parent();
if(parent == NULL)
parent = this;
if(m_KeypadFlag == KEYPAD_AZ)
{
strKey = m_pKeyButton[iIndex]->text();
}
else if(m_KeypadFlag == KEYPAD_09)
{
strKey = m_pNumberButton[iIndex]->text();
}
QRect rectKeyboard = this->geometry();
int iSrcWidth = rectKeyboard.x()+rectPressBtn.x()+keyOffset.x();
int iSrcHeight = rectKeyboard.y()+rectPressBtn.y()+keyOffset.y();
m_pSelectKey = new RtKeyButton(parent);
m_pSelectKey->SetImages(&m_Key1[1],&m_Key1[1]);
m_pSelectKey->setGeometry(iSrcWidth,iSrcHeight,m_Key1[1].width(),m_Key1[1].height());
m_pSelectKey->setButtonText(strKey,rectBtnText);
m_pSelectKey->setAlignStyle(RtKeyButton::AlignCenter);
m_pSelectKey->setEnabled(false);
QString strTmp = strKey.toLower();
QString strChar[]={"a","c","e","i","n","o","s","u","y"};
m_strExtKey = "";
bool bExtKey = false;
for(int i=0;i<9;i++)
{
if(strTmp.compare(strChar[i])==0){
m_strExtKey = strKey;
bExtKey = true;
break;
}
}
if(bExtKey){
m_pSelectKey->setExtKey(bExtKey);
m_pExtTimer->start(1000);
}
m_pSelectKey->show();
}
void Deskapp::mouseMoveEvent(QMouseEvent *event)
{
QPoint p = event->globalPos()-mousepos;
move(p.x(), p.y());
}
void LVL_ModeCircle::mousePress(QGraphicsSceneMouseEvent *mouseEvent)
{
if(!scene) return;
LvlScene *s = dynamic_cast<LvlScene *>(scene);
MainWindow* mw = s->m_mw;
if( mouseEvent->buttons() & Qt::RightButton )
{
item_rectangles::clearArray();
QMetaObject::invokeMethod(mw, "on_actionSelect_triggered");
dontCallEvent = true;
s->m_mouseIsMovedAfterKey = true;
return;
}
s->m_lastBlockArrayID=s->m_data->blocks_array_id;
s->m_lastBgoArrayID=s->m_data->bgo_array_id;
s->m_lastNpcArrayID=s->m_data->npc_array_id;
LogDebug(QString("Circle mode %1").arg(s->m_editMode));
if(s->m_cursorItemImg)
{
drawStartPos = QPointF(s->applyGrid( mouseEvent->scenePos().toPoint(),
LvlPlacingItems::gridSz,
LvlPlacingItems::gridOffset));
s->m_cursorItemImg->setPos( drawStartPos );
s->m_cursorItemImg->setVisible(true);
QPoint hw = s->applyGrid( mouseEvent->scenePos().toPoint(),
LvlPlacingItems::gridSz,
LvlPlacingItems::gridOffset);
QSize hs = QSize( (long)fabs(drawStartPos.x() - hw.x()), (long)fabs( drawStartPos.y() - hw.y() ) );
dynamic_cast<QGraphicsEllipseItem *>(s->m_cursorItemImg)->setRect(0,0, hs.width(), hs.height());
}
}
void MainWindow::mouseMoveEvent(QMouseEvent *event)
{
if (windowState() & (Qt::WindowMaximized | Qt::WindowFullScreen))
return;
QPoint globalPoint = event->globalPos();
if (isZoomReady && isLeftPressDown) {
QRect rect = this->rect();
QPoint topLeft = mapToGlobal(rect.topLeft());
QPoint bottomRight = mapToGlobal(rect.bottomRight());
QRect rMove(topLeft, bottomRight);
switch (direction) {
case Left:
if (bottomRight.x() - globalPoint.x() <= minimumWidth())
rMove.setX(topLeft.x());
else
rMove.setX(globalPoint.x());
break;
case Right:
rMove.setWidth(globalPoint.x() - topLeft.x());
break;
case Up:
if (bottomRight.y() - globalPoint.y() <= minimumHeight())
rMove.setY(topLeft.y());
else
rMove.setY(globalPoint.y());
break;
case Down:
rMove.setHeight(globalPoint.y() - topLeft.y());
break;
case LeftTop:
if (bottomRight.x() - globalPoint.x() <= minimumWidth())
rMove.setX(topLeft.x());
else
rMove.setX(globalPoint.x());
if (bottomRight.y() - globalPoint.y() <= minimumHeight())
rMove.setY(topLeft.y());
else
rMove.setY(globalPoint.y());
break;
case RightTop:
rMove.setWidth(globalPoint.x() - topLeft.x());
if (bottomRight.y() - globalPoint.y() <= minimumHeight())
rMove.setY(topLeft.y());
else
rMove.setY(globalPoint.y());
break;
case LeftBottom:
if (bottomRight.x() - globalPoint.x() <= minimumWidth())
rMove.setX(topLeft.x());
else
rMove.setX(globalPoint.x());
rMove.setHeight(globalPoint.y() - topLeft.y());
break;
case RightBottom:
rMove.setWidth(globalPoint.x() - topLeft.x());
rMove.setHeight(globalPoint.y() - topLeft.y());
break;
default:
break;
}
setGeometry(rMove);
} else if (isLeftPressDown && (event->buttons() & Qt::LeftButton)) {
move(event->globalPos() - movePosition);
event->accept();
} else if (!isLeftPressDown) {
region(globalPoint);
}
}
void StaggeredRenderer::drawTileLayer(QPainter *painter,
const TileLayer *layer,
const QRectF &exposed) const
{
const int tileWidth = map()->tileWidth();
const int tileHeight = map()->tileHeight();
QRect rect = exposed.toAlignedRect();
if (rect.isNull())
rect = boundingRect(layer->bounds());
QMargins drawMargins = layer->drawMargins();
drawMargins.setRight(drawMargins.right() - tileWidth);
rect.adjust(-drawMargins.right(),
-drawMargins.bottom(),
drawMargins.left(),
drawMargins.top());
// Determine the tile and pixel coordinates to start at
QPoint startTile = pixelToTileCoords(rect.x(), rect.y()).toPoint();
// Compensate for the layer position
startTile -= layer->position();
QPoint startPos = tileToPixelCoords(startTile + layer->position()).toPoint();
/* Determine in which half of the tile the top-left corner of the area we
* need to draw is. If we're in the upper half, we need to start one row
* up due to those tiles being visible as well. How we go up one row
* depends on whether we're in the left or right half of the tile.
*/
const bool inUpperHalf = startPos.y() - rect.y() > tileHeight / 2;
const bool inLeftHalf = rect.x() - startPos.x() < tileWidth / 2;
if (inUpperHalf)
startTile.ry()--;
if (inLeftHalf)
startTile.rx()--;
startTile.setX(qMax(0, startTile.x()));
startTile.setY(qMax(0, startTile.y()));
startPos = tileToPixelCoords(startTile + layer->position()).toPoint();
startPos.ry() += tileHeight;
// Odd row shifting is applied in the rendering loop, so un-apply it here
if ((startTile.y() + layer->y()) % 2)
startPos.rx() -= tileWidth / 2;
qDebug() << rect << startTile << startPos << layer->position();
QTransform baseTransform = painter->transform();
for (; startPos.y() < rect.bottom() && startTile.y() < layer->height(); startTile.ry()++) {
QPoint rowTile = startTile;
QPoint rowPos = startPos;
if ((startTile.y() + layer->y()) % 2)
rowPos.rx() += tileWidth / 2;
for (; rowPos.x() < rect.right() && rowTile.x() < layer->width(); rowTile.rx()++) {
const Cell &cell = layer->cellAt(rowTile);
if (cell.isEmpty()) {
rowPos.rx() += tileWidth;
continue;
}
#ifdef ZOMBOID
const QImage &img = cell.tile->image();
#else
const QPixmap &img = cell.tile->image();
#endif
const QPoint offset = cell.tile->tileset()->tileOffset();
qreal m11 = 1; // Horizontal scaling factor
qreal m12 = 0; // Vertical shearing factor
qreal m21 = 0; // Horizontal shearing factor
qreal m22 = 1; // Vertical scaling factor
qreal dx = offset.x() + rowPos.x();
qreal dy = offset.y() + rowPos.y() - img.height();
if (cell.flippedAntiDiagonally) {
// Use shearing to swap the X/Y axis
m11 = 0;
m12 = 1;
m21 = 1;
m22 = 0;
// Compensate for the swap of image dimensions
dy += img.height() - img.width();
}
if (cell.flippedHorizontally) {
m11 = -m11;
m21 = -m21;
dx += cell.flippedAntiDiagonally ? img.height()
: img.width();
}
if (cell.flippedVertically) {
m12 = -m12;
m22 = -m22;
dy += cell.flippedAntiDiagonally ? img.width()
: img.height();
}
const QTransform transform(m11, m12, m21, m22, dx, dy);
painter->setTransform(transform * baseTransform);
#ifdef ZOMBOID
painter->drawImage(0, 0, img);
#else
painter->drawPixmap(0, 0, img);
#endif
rowPos.rx() += tileWidth;
}
startPos.ry() += tileHeight / 2;
}
painter->setTransform(baseTransform);
}
void HexagonalRenderer::drawTileLayer(QPainter *painter,
const TileLayer *layer,
const QRectF &exposed) const
{
const RenderParams p(map());
QRect rect = exposed.toAlignedRect();
if (rect.isNull())
rect = boundingRect(layer->bounds());
QMargins drawMargins = layer->drawMargins();
drawMargins.setBottom(drawMargins.bottom() + p.tileHeight);
drawMargins.setRight(drawMargins.right() - p.tileWidth);
rect.adjust(-drawMargins.right(),
-drawMargins.bottom(),
drawMargins.left(),
drawMargins.top());
// Determine the tile and pixel coordinates to start at
QPoint startTile = screenToTileCoords(rect.topLeft()).toPoint();
// Compensate for the layer position
startTile -= layer->position();
QPoint startPos = tileToScreenCoords(startTile + layer->position()).toPoint();
/* Determine in which half of the tile the top-left corner of the area we
* need to draw is. If we're in the upper half, we need to start one row
* up due to those tiles being visible as well. How we go up one row
* depends on whether we're in the left or right half of the tile.
*/
const bool inUpperHalf = rect.y() - startPos.y() < p.sideOffsetY;
const bool inLeftHalf = rect.x() - startPos.x() < p.sideOffsetX;
if (inUpperHalf)
startTile.ry()--;
if (inLeftHalf)
startTile.rx()--;
CellRenderer renderer(painter);
if (p.staggerX) {
startTile.setX(qMax(-1, startTile.x()));
startTile.setY(qMax(-1, startTile.y()));
startPos = tileToScreenCoords(startTile + layer->position()).toPoint();
startPos.ry() += p.tileHeight;
bool staggeredRow = p.doStaggerX(startTile.x() + layer->x());
for (; startPos.y() < rect.bottom() && startTile.y() < layer->height();) {
QPoint rowTile = startTile;
QPoint rowPos = startPos;
for (; rowPos.x() < rect.right() && rowTile.x() < layer->width(); rowTile.rx() += 2) {
if (layer->contains(rowTile)) {
const Cell &cell = layer->cellAt(rowTile);
if (!cell.isEmpty())
renderer.render(cell, rowPos, QSizeF(0, 0), CellRenderer::BottomLeft);
}
rowPos.rx() += p.tileWidth + p.sideLengthX;
}
if (staggeredRow) {
startTile.rx() -= 1;
startTile.ry() += 1;
startPos.rx() -= p.columnWidth;
staggeredRow = false;
} else {
startTile.rx() += 1;
startPos.rx() += p.columnWidth;
staggeredRow = true;
}
startPos.ry() += p.rowHeight;
}
} else {
startTile.setX(qMax(0, startTile.x()));
startTile.setY(qMax(0, startTile.y()));
startPos = tileToScreenCoords(startTile + layer->position()).toPoint();
startPos.ry() += p.tileHeight;
// Odd row shifting is applied in the rendering loop, so un-apply it here
if (p.doStaggerY(startTile.y() + layer->y()))
startPos.rx() -= p.columnWidth;
for (; startPos.y() < rect.bottom() && startTile.y() < layer->height(); startTile.ry()++) {
QPoint rowTile = startTile;
QPoint rowPos = startPos;
if (p.doStaggerY(startTile.y() + layer->y()))
rowPos.rx() += p.columnWidth;
for (; rowPos.x() < rect.right() && rowTile.x() < layer->width(); rowTile.rx()++) {
const Cell &cell = layer->cellAt(rowTile);
if (!cell.isEmpty())
renderer.render(cell, rowPos, QSizeF(0, 0), CellRenderer::BottomLeft);
rowPos.rx() += p.tileWidth + p.sideLengthX;
}
startPos.ry() += p.rowHeight;
}
}
}
void FormWindowBase::setGrid(const QPoint &grid)
{
m_d->m_grid.setDeltaX(grid.x());
m_d->m_grid.setDeltaY(grid.y());
}
void QgsComposerView::mouseReleaseEvent( QMouseEvent* e )
{
if ( !composition() )
{
return;
}
if ( e->button() != Qt::LeftButton &&
( composition()->selectionHandles()->isDragging() || composition()->selectionHandles()->isResizing() ) )
{
//ignore clicks while dragging/resizing items
return;
}
QPoint mousePressStopPoint = e->pos();
int diffX = mousePressStopPoint.x() - mMousePressStartPos.x();
int diffY = mousePressStopPoint.y() - mMousePressStartPos.y();
//was this just a click? or a click and drag?
bool clickOnly = false;
if ( qAbs( diffX ) < 2 && qAbs( diffY ) < 2 )
{
clickOnly = true;
}
QPointF scenePoint = mapToScene( e->pos() );
if ( mMousePanning || mToolPanning )
{
mMousePanning = false;
mToolPanning = false;
if ( clickOnly && e->button() == Qt::MidButton )
{
//middle mouse button click = recenter on point
//get current visible part of scene
QRect viewportRect( 0, 0, viewport()->width(), viewport()->height() );
QgsRectangle visibleRect = QgsRectangle( mapToScene( viewportRect ).boundingRect() );
visibleRect.scale( 1, scenePoint.x(), scenePoint.y() );
QRectF boundsRect = visibleRect.toRectF();
//zoom view to fit desired bounds
fitInView( boundsRect, Qt::KeepAspectRatio );
}
//set new cursor
if ( mCurrentTool != Pan )
{
if ( composition() )
{
//allow composer items to change cursor
composition()->setPreventCursorChange( false );
}
}
viewport()->setCursor( defaultCursorForTool( mCurrentTool ) );
}
//for every other tool, ignore clicks of non-left button
if ( e->button() != Qt::LeftButton )
{
return;
}
if ( mMarqueeSelect )
{
endMarqueeSelect( e );
return;
}
switch ( mCurrentTool )
{
case Select:
{
QGraphicsView::mouseReleaseEvent( e );
break;
}
case Zoom:
{
if ( mMarqueeZoom )
{
endMarqueeZoom( e );
}
break;
}
case MoveItemContent:
{
if ( mMoveContentItem )
{
//update map preview if composer map
QgsComposerMap* composerMap = dynamic_cast<QgsComposerMap *>( mMoveContentItem );
if ( composerMap )
{
composerMap->setOffset( 0, 0 );
}
double moveX = scenePoint.x() - mMoveContentStartPos.x();
double moveY = scenePoint.y() - mMoveContentStartPos.y();
composition()->beginCommand( mMoveContentItem, tr( "Move item content" ) );
mMoveContentItem->moveContent( -moveX, -moveY );
composition()->endCommand();
mMoveContentItem = 0;
mMovingItemContent = false;
}
break;
}
case AddArrow:
if ( composition() )
{
QPointF scenePoint = mapToScene( e->pos() );
QPointF snappedScenePoint = composition()->snapPointToGrid( scenePoint );
QgsComposerArrow* composerArrow = new QgsComposerArrow( mRubberBandStartPos, QPointF( snappedScenePoint.x(), snappedScenePoint.y() ), composition() );
composition()->addComposerArrow( composerArrow );
composition()->clearSelection();
composerArrow->setSelected( true );
emit selectedItemChanged( composerArrow );
scene()->removeItem( mRubberBandLineItem );
delete mRubberBandLineItem;
mRubberBandLineItem = 0;
emit actionFinished();
composition()->pushAddRemoveCommand( composerArrow, tr( "Arrow added" ) );
}
break;
case AddRectangle:
case AddTriangle:
case AddEllipse:
addShape( mCurrentTool );
break;
case AddMap:
if ( !mRubberBandItem || ( mRubberBandItem->rect().width() < 0.1 && mRubberBandItem->rect().height() < 0.1 ) )
{
removeRubberBand();
return;
}
if ( composition() )
{
QgsComposerMap* composerMap = new QgsComposerMap( composition(), mRubberBandItem->transform().dx(), mRubberBandItem->transform().dy(), mRubberBandItem->rect().width(), mRubberBandItem->rect().height() );
composition()->addComposerMap( composerMap );
composition()->clearSelection();
composerMap->setSelected( true );
emit selectedItemChanged( composerMap );
removeRubberBand();
emit actionFinished();
composition()->pushAddRemoveCommand( composerMap, tr( "Map added" ) );
}
break;
case AddHtml:
if ( composition() )
{
QgsComposerHtml* composerHtml = new QgsComposerHtml( composition(), true );
QgsAddRemoveMultiFrameCommand* command = new QgsAddRemoveMultiFrameCommand( QgsAddRemoveMultiFrameCommand::Added,
composerHtml, composition(), tr( "Html item added" ) );
composition()->undoStack()->push( command );
QgsComposerFrame* frame = new QgsComposerFrame( composition(), composerHtml, mRubberBandItem->transform().dx(),
mRubberBandItem->transform().dy(), mRubberBandItem->rect().width(),
mRubberBandItem->rect().height() );
composition()->beginMultiFrameCommand( composerHtml, tr( "Html frame added" ) );
composerHtml->addFrame( frame );
composition()->endMultiFrameCommand();
composition()->clearSelection();
frame->setSelected( true );
emit selectedItemChanged( frame );
removeRubberBand();
emit actionFinished();
}
default:
break;
}
}
void ProfileScene::addVertex(QPoint mousePos)
{
//if clicked on an edge, add point on this edge
QGraphicsLineItem* currentEdge = 0;
bool foundEdge(false);
Profile* profile = currentProfile;
Vertex* currentVertex = profile->getProfileVertex();
while(currentVertex->getNeighbor2() != 0) {
currentEdge = currentVertex->getEdge2();
if (currentEdge->isUnderMouse()) {
foundEdge = true;
break;
}
currentVertex = currentVertex->getNeighbor2();
}
float w = mousePos.x();
float z = mousePos.y();
if (foundEdge) {
QGraphicsEllipseItem* ellipse = new QGraphicsEllipseItem(w - vertexRadius, z - vertexRadius, vertexRadius * 2.0f, vertexRadius * 2.0f);
QRectF thisSize = this->sceneRect();
Utils::adjustCoordinatesSceneTo3D(w, z, thisSize.width(), thisSize.height());
//build the new vertex and add the edges between the new neighbour
Vertex* newVertex = new Vertex(w, z);
newVertex->setEllipse(ellipse);
Vertex* nextVertex = currentVertex->getNeighbor2();
Vertex* previousVertex = currentVertex;
QGraphicsLineItem* edge1 = previousVertex->replaceNeighbour(nextVertex, newVertex);
QGraphicsLineItem* edge2 = nextVertex->replaceNeighbour(previousVertex, newVertex);
//set all neighbour/edges of the new vertex
newVertex->setNeighbor1(previousVertex);//addNeighbor
newVertex->setEdge1(edge1);
newVertex->setNeighbor2(nextVertex);//addNeighbor
newVertex->setEdge2(edge2);
//finally show the ellipse and delete the old edge
this->addItem(ellipse);
this->addItem(edge1);
this->addItem(edge2);
this->removeItem(currentEdge);
delete currentEdge;
// tell the mesh to generate new point/triangle
mesh->setUpdateOnMesh();
} else {
// we don't have clicked on an edge, we will put the point at the current position
Vertex * newVertex = new Vertex(0,0);
newVertex->setEllipse(new QGraphicsEllipseItem(w - vertexRadius, z - vertexRadius, vertexRadius * 2.0f, vertexRadius*2.0f));
QRectF thisSize = this->sceneRect();
Utils::adjustCoordinatesSceneTo3D(w, z, thisSize.width(), thisSize.height());
newVertex->setX(w);
newVertex->setY(z);
this->currentProfile->addVertexEnd(newVertex);
this->addItem(newVertex->getEllipse());
this->addItem(newVertex->getEdge1());
// tell the mesh to generate new point/triangle
mesh->setUpdateOnMesh();
}
}
void QXcbWindow::setParent(const QPlatformWindow *parent)
{
QPoint topLeft = geometry().topLeft();
Q_XCB_CALL(xcb_reparent_window(xcb_connection(), window(), static_cast<const QXcbWindow *>(parent)->window(), topLeft.x(), topLeft.y()));
}
void ApplicationOverlay::renderControllerPointers() {
Application* application = Application::getInstance();
GLCanvas* glWidget = application->getGLWidget();
MyAvatar* myAvatar = application->getAvatar();
//Static variables used for storing controller state
static quint64 pressedTime[NUMBER_OF_RETICLES] = { 0ULL, 0ULL, 0ULL };
static bool isPressed[NUMBER_OF_RETICLES] = { false, false, false };
static bool stateWhenPressed[NUMBER_OF_RETICLES] = { false, false, false };
const HandData* handData = Application::getInstance()->getAvatar()->getHandData();
for (unsigned int palmIndex = 2; palmIndex < 4; palmIndex++) {
const int index = palmIndex - 1;
const PalmData* palmData = NULL;
if (palmIndex >= handData->getPalms().size()) {
return;
}
if (handData->getPalms()[palmIndex].isActive()) {
palmData = &handData->getPalms()[palmIndex];
} else {
continue;
}
int controllerButtons = palmData->getControllerButtons();
//Check for if we should toggle or drag the magnification window
if (controllerButtons & BUTTON_3) {
if (isPressed[index] == false) {
//We are now dragging the window
isPressed[index] = true;
//set the pressed time in us
pressedTime[index] = usecTimestampNow();
stateWhenPressed[index] = _magActive[index];
}
} else if (isPressed[index]) {
isPressed[index] = false;
//If the button was only pressed for < 250 ms
//then disable it.
const int MAX_BUTTON_PRESS_TIME = 250 * MSECS_TO_USECS;
if (usecTimestampNow() < pressedTime[index] + MAX_BUTTON_PRESS_TIME) {
_magActive[index] = !stateWhenPressed[index];
}
}
//if we have the oculus, we should make the cursor smaller since it will be
//magnified
if (OculusManager::isConnected()) {
QPoint point = getPalmClickLocation(palmData);
_reticlePosition[index] = point;
//When button 2 is pressed we drag the mag window
if (isPressed[index]) {
_magActive[index] = true;
}
// If oculus is enabled, we draw the crosshairs later
continue;
}
int mouseX, mouseY;
if (Menu::getInstance()->isOptionChecked(MenuOption::SixenseLasers)) {
QPoint res = getPalmClickLocation(palmData);
mouseX = res.x();
mouseY = res.y();
} else {
// Get directon relative to avatar orientation
glm::vec3 direction = glm::inverse(myAvatar->getOrientation()) * palmData->getFingerDirection();
// Get the angles, scaled between (-0.5,0.5)
float xAngle = (atan2(direction.z, direction.x) + M_PI_2);
float yAngle = 0.5f - ((atan2(direction.z, direction.y) + M_PI_2));
// Get the pixel range over which the xAngle and yAngle are scaled
float cursorRange = glWidget->width() * SixenseManager::getInstance().getCursorPixelRangeMult();
mouseX = (glWidget->width() / 2.0f + cursorRange * xAngle);
mouseY = (glWidget->height() / 2.0f + cursorRange * yAngle);
}
//If the cursor is out of the screen then don't render it
if (mouseX < 0 || mouseX >= glWidget->width() || mouseY < 0 || mouseY >= glWidget->height()) {
_reticleActive[index] = false;
continue;
}
_reticleActive[index] = true;
const float reticleSize = 40.0f;
mouseX -= reticleSize / 2.0f;
mouseY += reticleSize / 2.0f;
glBegin(GL_QUADS);
glColor3f(RETICLE_COLOR[0], RETICLE_COLOR[1], RETICLE_COLOR[2]);
glTexCoord2d(0.0f, 0.0f); glVertex2i(mouseX, mouseY);
glTexCoord2d(1.0f, 0.0f); glVertex2i(mouseX + reticleSize, mouseY);
glTexCoord2d(1.0f, 1.0f); glVertex2i(mouseX + reticleSize, mouseY - reticleSize);
glTexCoord2d(0.0f, 1.0f); glVertex2i(mouseX, mouseY - reticleSize);
glEnd();
}
}
