bool Ficgta01MultiplexerPlugin::detect( QSerialIODevice *device )
{
// The FIC needs a special line discipline set on the device.
QSerialPort *port = qobject_cast<QSerialPort *>( device );
if (port) {
int discipline = N_TIHTC;
::ioctl(port->fd(), TIOCSETD, &discipline);
}
device->discard();
int rc;
struct termios t;
rc = tcgetattr(port->fd(), &t);
t.c_cflag |= CRTSCTS;
rc = tcsetattr(port->fd(), TCSANOW, &t);
// Issue an innocuous command to wake up the device.
// It will respond with either "OK" or "AT-Command Interpreter ready".
// We will do this up to 10 times as the modem is losing the first at
// commands (due waking up)
int attempts = 10;
while (--attempts >= 0 && !QSerialIODeviceMultiplexer::chat( device, "ATZ"));
// Issue the AT+CMUX command to determine if this device
// uses GSM 07.10-style multiplexing.
#ifndef FICGTA01_NO_MUX
return QGsm0710Multiplexer::cmuxChat( device, FICGTA01_FRAME_SIZE, true );
#else
return true;
#endif
}
bool NeoMultiplexerPlugin::detect( QSerialIODevice *device )
{
qLog(Hardware) << __PRETTY_FUNCTION__;
// Power on modem via sysfs
QFile f("/sys/bus/platform/devices/neo1973-pm-gsm.0/power_on");
if(f.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Truncate)) {
f.write("0");
f.close();
}
if(f.open(QIODevice::WriteOnly | QIODevice::Text | QIODevice::Truncate)) {
f.write("1");
f.close();
} else {
qWarning() << "Modem power on failed "<< f.errorString();
}
// The FIC needs a special line discipline set on the device.
QSerialPort *port = qobject_cast<QSerialPort *>( device );
if (port) {
int discipline = N_TIHTC;
::ioctl(port->fd(), TIOCSETD, &discipline);
}
device->discard();
int rc;
struct termios t;
rc = tcgetattr(port->fd(), &t);
t.c_cflag |= CRTSCTS;
rc = tcsetattr(port->fd(), TCSANOW, &t);
QValueSpaceItem deviceString("/Hardware/Neo/Device");
if ( deviceString.value().toString() == "GTA02") {
qLog(Hardware) << __PRETTY_FUNCTION__ << "is gta02";
muxEnabled = true;
} else {
qLog(Hardware) << __PRETTY_FUNCTION__ << "is gta01";
muxEnabled = false;
}
QSettings cfg("Trolltech", "Modem");
QString multiplexing = cfg.value("Multiplexing/Active", "yes").toString();
muxEnabled &= (multiplexing != "no");
qLog(Mux) << "Neo multiplexing " << (muxEnabled ? "enabled" : "disabled")
<< multiplexing;
// Make the modem talk to us. It can be a bit rough to get
// it initialized... So we will empty the current buffer
// and then send ^Z\r\n and wait for an OK or AT from the modem. This is
// mostly based on ideas from ogsmd
device->readAll();
int attempts = 0;
for (; attempts < 2; ++attempts) {
if (QSerialIODeviceMultiplexer::chat(device, QChar(0x1a))) {
qLog(Modem) << "Attempts needed to initialize the modem" << attempts;
break;
}
}
if (attempts == 2) {
qWarning() << "Initializing the modem failed.";
abort();
}
// disable echoing of commands
QSerialIODeviceMultiplexer::chat(device, "ATE0");
device->readAll();
if (muxEnabled) {
// Issue the AT+CMUX command to determine if this device
// uses GSM 07.10-style multiplexing.
return QGsm0710Multiplexer::cmuxChat( device, NEO_FRAME_SIZE, true );
}
return true;
}
