示例#1
0
AddDeviceDialog::AddDeviceDialog(QWidget *parent, const QString &caption)
	: KDialog(parent)
{
    setObjectName("AddDeviceDialog");

    setModal(true);
    setButtons(KDialog::Ok|KDialog::Cancel);
    setCaption(caption);
    showButtonSeparator(true);

    QWidget *w = new QWidget(this);
    QVBoxLayout *vl = new QVBoxLayout(w);
    setMainWidget(w);

    QLabel *lab = new QLabel(i18n("<qt>"
"<p>"
"If your scanner has not been automatically detected, you can specify it here. "
"The <b>Scanner device name</b> should be a backend name (with optional parameters) "
"that is understood by SANE, see <a href=\"man:/sane\">sane(7)</a> or "
"<a href=\"man:/sane-dll\">sane-dll(5)</a> for more information on available backends. "
"The <b>Type</b> and <b>Description</b> can be used to identify the scanner later."
"<p>"
"For the information that needs to be entered here, try to locate the device using the "
"<a href=\"man:/sane-find-scanner\">sane-find-scanner(1)</a> command. For a "
"USB or networked HP scanner using <a href=\"http://hplip.sourceforge.net/\">HPLIP</a>, "
"try using the <u>hp-probe</u> command to locate it, for example "
"'hp-probe&nbsp;-b&nbsp;usb' or 'hp-probe&nbsp;-b&nbsp;net'. "
"If the scanner is found, then enter the device name displayed by these commands; note "
"that if using HPLIP then \"hp:\" needs to be replaced by \"hpaio:\"."
"<p>"
"If these commands fail to locate your scanner, then it may not be supported "
"by SANE. Check the SANE documentation for a "
"<a href=\"http://www.sane-project.org/sane-supported-devices.html\">list of supported devices</a>."
"<br>"),w);
    lab->setWordWrap(true);
    lab->setOpenExternalLinks(true);
    vl->addWidget(lab);

    vl->addSpacing(KDialog::spacingHint());
    vl->addStretch(1);

    lab = new QLabel(i18n("Scanner device name:"), w);
    vl->addWidget(lab);

    mDevEdit = new KLineEdit(w);
    connect(mDevEdit, SIGNAL(textChanged(const QString &)), SLOT(slotTextChanged()));
    vl->addWidget(mDevEdit);
    lab->setBuddy(mDevEdit);

    lab = new QLabel(i18n("Device type:"), w);
    vl->addWidget(lab);

    mTypeCombo = new QComboBox(w);
    vl->addWidget(mTypeCombo);
    lab->setBuddy(mTypeCombo);

    lab = new QLabel(i18n("Description:"), w);
    vl->addWidget(lab);

    mDescEdit = new KLineEdit(w);
    connect(mDescEdit, SIGNAL(textChanged(const QString &)), SLOT(slotTextChanged()));
    vl->addWidget(mDescEdit);
    lab->setBuddy(mDescEdit);

    w->setMinimumSize(QSize(450, 420));

    // This list from http://www.sane-project.org/html/doc011.html#s4.2.8
    QStringList types;
    types << "scanner" << "film scanner" << "flatbed scanner"
          << "frame grabber" << "handheld scanner" << "multi-function peripheral"
          << "sheetfed scanner" << "still camera" << "video camera"
          << "virtual device";
    mTypeCombo->addItems(types);

    slotTextChanged();
}
示例#2
0
void PathDeformControls::layoutForSmallScreen()
{
    QGroupBox* mainGroup = new QGroupBox(this);
    mainGroup->setTitle(tr("Controls"));

    QLabel *radiusLabel = new QLabel(mainGroup);
    radiusLabel->setText(tr("Lens Radius:"));
    QSlider *radiusSlider = new QSlider(Qt::Horizontal, mainGroup);
    radiusSlider->setRange(15, 150);
    radiusSlider->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);

    QLabel *deformLabel = new QLabel(mainGroup);
    deformLabel->setText(tr("Deformation:"));
    QSlider *deformSlider = new QSlider(Qt::Horizontal, mainGroup);
    deformSlider->setRange(-100, 100);
    deformSlider->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);

    QLabel *fontSizeLabel = new QLabel(mainGroup);
    fontSizeLabel->setText(tr("Font Size:"));
    QSlider *fontSizeSlider = new QSlider(Qt::Horizontal, mainGroup);
    fontSizeSlider->setRange(16, 200);
    fontSizeSlider->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);

    QPushButton *animateButton = new QPushButton(tr("Animated"), mainGroup);
    animateButton->setCheckable(true);

#ifdef QT_OPENGL_SUPPORT
    QPushButton *enableOpenGLButton = new QPushButton(mainGroup);
    enableOpenGLButton->setText(tr("Use OpenGL"));
    enableOpenGLButton->setCheckable(mainGroup);
    enableOpenGLButton->setChecked(m_renderer->usesOpenGL());
    if (!QGLFormat::hasOpenGL())
        enableOpenGLButton->hide();
#endif

    QPushButton *quitButton = new QPushButton(tr("Quit"), mainGroup);
    QPushButton *okButton = new QPushButton(tr("OK"), mainGroup);


    QGridLayout *mainGroupLayout = new QGridLayout(mainGroup);
    mainGroupLayout->setMargin(0);
    mainGroupLayout->addWidget(radiusLabel, 0, 0, Qt::AlignRight);
    mainGroupLayout->addWidget(radiusSlider, 0, 1);
    mainGroupLayout->addWidget(deformLabel, 1, 0, Qt::AlignRight);
    mainGroupLayout->addWidget(deformSlider, 1, 1);
    mainGroupLayout->addWidget(fontSizeLabel, 2, 0, Qt::AlignRight);
    mainGroupLayout->addWidget(fontSizeSlider, 2, 1);
    mainGroupLayout->addWidget(animateButton, 3,0, 1,2);
#ifdef QT_OPENGL_SUPPORT
    mainGroupLayout->addWidget(enableOpenGLButton, 4,0, 1,2);
#endif

    QVBoxLayout *mainLayout = new QVBoxLayout(this);
    mainLayout->addWidget(mainGroup);
    mainLayout->addStretch(1);
    mainLayout->addWidget(okButton);
    mainLayout->addWidget(quitButton);

    connect(quitButton, SIGNAL(clicked()), this, SLOT(emitQuitSignal()));
    connect(okButton, SIGNAL(clicked()), this, SLOT(emitOkSignal()));
    connect(radiusSlider, SIGNAL(valueChanged(int)), m_renderer, SLOT(setRadius(int)));
    connect(deformSlider, SIGNAL(valueChanged(int)), m_renderer, SLOT(setIntensity(int)));
    connect(fontSizeSlider, SIGNAL(valueChanged(int)), m_renderer, SLOT(setFontSize(int)));
    connect(animateButton, SIGNAL(clicked(bool)), m_renderer, SLOT(setAnimated(bool)));
#ifdef QT_OPENGL_SUPPORT
    connect(enableOpenGLButton, SIGNAL(clicked(bool)), m_renderer, SLOT(enableOpenGL(bool)));
#endif


    animateButton->animateClick();
    deformSlider->setValue(80);
    fontSizeSlider->setValue(120);

    QRect screen_size = QApplication::desktop()->screenGeometry();
    radiusSlider->setValue(qMin(screen_size.width(), screen_size.height())/5);

    m_renderer->setText(tr("Qt"));
}
示例#3
0
AboutDlg::AboutDlg(QWidget *parent) : QDialog(parent) {
    this->setWindowTitle(tr("About QtRptDesigner"));
    QSize MaxSize(420, 450);
    QSize MinSize(420, 450);
    setMaximumSize(MaxSize);
    setMinimumSize(MinSize);

    QRect gry = geometry();
    gry.moveCenter(qApp->desktop()->availableGeometry().center());
    setGeometry(gry);

    QPushButton *btnOK = new QPushButton(this);
    btnOK->setText("OK");
    QObject::connect(btnOK, SIGNAL(clicked()), this, SLOT(close()));

    QLabel *labImg = new QLabel(this);
    labImg->setPixmap(QPixmap(":/new/prefix1/images/Logo128.png"));
    QString lbl1 = "<h2><b><p style='color:#0033FF'>"+QApplication::applicationName()+"</p></b></h2>"+
                  tr("Version: ")+QApplication::applicationVersion()+"<br>"+
                  tr("Programmer: Aleksey Osipov")+"<br>"+
                  "WebSite: <a href='http://www.aliks-os.tk'>http://www.aliks-os.tk</a>"+"<br>"+
                  "E-mail: [email protected]"+"<br>"+
                  "<a href='http://www.qtrpt.tk'>http://www.qtrpt.tk</a>"+"<br>"+
                  tr("2012-2015 years")+"<br><br>";
    QString lbl2 = "<b>"+tr("Thanks for donation:")+"</b>"+
                  "<ul>"+
                  "<li>"+tr("Sailendram")+"</li>"+
                  "</ul>"+
                  "<b>"+tr("Thanks for project developing:")+"</b>"+
                  "<ul>"+
                  "<li>"+tr("Lukas Lalinsky for DBmodel")+"</li>"+
                  "<li>"+tr("Norbert Schlia for help in developing")+"</li>"+
                  "<li>"+tr("Muhamad Bashir Al-Noimi for Arabic translation")+"</li>"+
                  "<li>"+tr("Luis Brochado for Portuguese translation")+"</li>"+
                  "<li>"+tr("Li Wei for Chinese translation")+"</li>"+
                  "<li>"+tr("Laurent Guilbert for French translation")+"</li>"+
                  "<li>"+tr("David Heremans for Dutch translation")+"</li>"+
                  "<li>"+tr("Mirko Marx for German translation")+"</li>"+
                  "<li>"+tr("Manuel Soriano for Spanish translation")+"</li>"+
                  "</ul>";
    QLabel *lab1 = new QLabel(lbl1, this);
    QObject::connect(lab1, SIGNAL(linkActivated(const QString)), this, SLOT(openLink(const QString)));
    QLabel *lab2 = new QLabel(lbl2, this);

    QHBoxLayout *hLayout2 = new QHBoxLayout;
    hLayout2->addWidget(labImg);
    hLayout2->addWidget(lab1);
    hLayout2->addStretch();

    QHBoxLayout *hLayout1 = new QHBoxLayout;
    //hLayout->addSpacerItem(spacer1);
    hLayout1->addStretch();
    hLayout1->addWidget(btnOK);
    //hLayout->addSpacerItem(spacer2);
    hLayout1->addStretch();

    QVBoxLayout *vLayout = new QVBoxLayout;
    //vLayout->addSpacerItem(spacer3);
    vLayout->addLayout(hLayout2);
    vLayout->addWidget(lab2);
    vLayout->addStretch();
    vLayout->addLayout(hLayout1);
    this->setLayout(vLayout);
}
QVBoxLayout* ColormapEditWidget::createButtonPanel()
{
    QVBoxLayout* vLayout = new QVBoxLayout();

    QHBoxLayout* hLayout = new QHBoxLayout();
    m_cLabel = new QLabel( this );
    m_sliders.clear();

    QImage* image;
    image = createImage( this->width() - 20 );
    QPixmap pix( this->width() - 20, 20 );
    pix.convertFromImage( *image );
    m_cLabel->setPixmap( pix );
    hLayout->addStretch();
    hLayout->addWidget( m_cLabel );
    hLayout->addStretch();
    vLayout->addLayout( hLayout );
    vLayout->addSpacing( 5 );

    int i = 0;
    {
        QHBoxLayout* hLayout2 = new QHBoxLayout();
        PushButtonWithId* insertButton = new PushButtonWithId( "+", i );
        insertButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        connect( insertButton, SIGNAL( signalClicked( int ) ), this, SLOT( newEntry( int ) ) );
        insertButton->setDisabled( true );

        PushButtonWithId* deleteButton = new PushButtonWithId( "-", i );
        deleteButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        connect( deleteButton, SIGNAL( signalClicked( int ) ), this, SLOT( removeEntry( int ) ) );
        deleteButton->setDisabled( true );

        PushButtonWithId* upButton = new PushButtonWithId( "^", i );
        upButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        upButton->setDisabled( true );
        //connect( upButton, SIGNAL( signalClicked( int ) ), this, SLOT( moveUp( int ) ) );

        PushButtonWithId* downButton = new PushButtonWithId( "v", i );
        downButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        connect( downButton, SIGNAL( signalClicked( int ) ), this, SLOT( moveDown( int ) ) );

        SliderWithEdit* slider = new SliderWithEdit( tr(""), Fn::Position::EAST, i );
        m_sliders.push_back( slider );
        slider->setMin( 0.0f );
        slider->setMax( m_colormap.get( i + 1 ).value );
        slider->setValue( m_colormap.get( i ).value );
        connect( slider, SIGNAL( valueChanged( float, int ) ), this, SLOT( sliderChanged( float, int ) ) );


        ColorWidgetWithLabel* colorWidget = new ColorWidgetWithLabel( QString::number( i ), i );
        colorWidget->setValue( m_colormap.get( i ).color );
        connect( colorWidget, SIGNAL( colorChanged( QColor, int ) ), this, SLOT( colorChanged( QColor, int ) ) );

        hLayout2->addWidget( insertButton );
        hLayout2->addWidget( deleteButton );
        hLayout2->addWidget( upButton );
        hLayout2->addWidget( downButton );
        hLayout2->addWidget( slider );
        hLayout2->addWidget( colorWidget );
        vLayout->addLayout( hLayout2 );
    }


    for ( int i = 1; i < m_colormap.size() - 1; ++i )
    {
        QHBoxLayout* hLayout4 = new QHBoxLayout();
        PushButtonWithId* insertButton = new PushButtonWithId( "+", i );
        hLayout4->addWidget( insertButton );
        insertButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        connect( insertButton, SIGNAL( signalClicked( int ) ), this, SLOT( newEntry( int ) ) );

        PushButtonWithId* deleteButton = new PushButtonWithId( "-", i );
        hLayout4->addWidget( deleteButton );
        deleteButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        connect( deleteButton, SIGNAL( signalClicked( int ) ), this, SLOT( removeEntry( int ) ) );

        PushButtonWithId* upButton = new PushButtonWithId( "^", i );
        hLayout4->addWidget( upButton );
        upButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        connect( upButton, SIGNAL( signalClicked( int ) ), this, SLOT( moveUp( int ) ) );

        PushButtonWithId* downButton = new PushButtonWithId( "v", i );
        hLayout4->addWidget( downButton );
        downButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        connect( downButton, SIGNAL( signalClicked( int ) ), this, SLOT( moveDown( int ) ) );

        SliderWithEdit* slider = new SliderWithEdit( tr(""), Fn::Position::EAST, i );
        m_sliders.push_back( slider );
        slider->setMin( m_colormap.get( i - 1 ).value );
        slider->setMax( m_colormap.get( i + 1 ).value );
        slider->setValue( m_colormap.get( i ).value );
        connect( slider, SIGNAL( valueChanged( float, int ) ), this, SLOT( sliderChanged( float, int ) ) );
        hLayout4->addWidget( slider );

        ColorWidgetWithLabel* colorWidget = new ColorWidgetWithLabel( QString::number( i ), i );
        colorWidget->setValue( m_colormap.get( i ).color );
        connect( colorWidget, SIGNAL( colorChanged( QColor, int ) ), this, SLOT( colorChanged( QColor, int ) ) );
        hLayout4->addWidget( colorWidget );

        vLayout->addLayout( hLayout4 );
    }

    {
        i = m_colormap.size() - 1;
        QHBoxLayout* hLayout2 = new QHBoxLayout();
        PushButtonWithId* insertButton = new PushButtonWithId( "+", i );
        insertButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        connect( insertButton, SIGNAL( signalClicked( int ) ), this, SLOT( newEntry( int ) ) );

        PushButtonWithId* deleteButton = new PushButtonWithId( "-", i );
        deleteButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        connect( deleteButton, SIGNAL( signalClicked( int ) ), this, SLOT( removeEntry( int ) ) );
        deleteButton->setDisabled( true );

        PushButtonWithId* upButton = new PushButtonWithId( "^", i );
        upButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        connect( upButton, SIGNAL( signalClicked( int ) ), this, SLOT( moveUp( int ) ) );

        PushButtonWithId* downButton = new PushButtonWithId( "v", i );
        downButton->setStyleSheet( "QPushButton { font:  bold 12px; max-width: 14px; max-height: 14px; } ");
        downButton->setDisabled( true );
        //connect( downButton, SIGNAL( signalClicked( int ) ), this, SLOT( moveDown( int ) ) );

        SliderWithEdit* slider = new SliderWithEdit( tr(""), Fn::Position::EAST, i );
        m_sliders.push_back( slider );
        slider->setMin( m_colormap.get( i - 1 ).value );
        slider->setMax( 1.0f );
        slider->setValue( m_colormap.get( i ).value );
        connect( slider, SIGNAL( valueChanged( float, int ) ), this, SLOT( sliderChanged( float, int ) ) );


        ColorWidgetWithLabel* colorWidget = new ColorWidgetWithLabel( QString::number( i ), i );
        colorWidget->setValue( m_colormap.get( i ).color );
        connect( colorWidget, SIGNAL( colorChanged( QColor, int ) ), this, SLOT( colorChanged( QColor, int ) ) );

        hLayout2->addWidget( insertButton );
        hLayout2->addWidget( deleteButton );
        hLayout2->addWidget( upButton );
        hLayout2->addWidget( downButton );
        hLayout2->addWidget( slider );
        hLayout2->addWidget( colorWidget );
        vLayout->addLayout( hLayout2 );
    }

    vLayout->addStretch();
    return vLayout;
}
示例#5
0
AudioInSettings::AudioInSettings(TaudioParams* params, Ttune* tune, QWidget* parent) :
  TtouchArea(parent),
  m_audioIn(0),
  m_glParams(params),
  m_listGenerated(false),
  m_tune(tune)
{
	QString styleTxt = "background-color: palette(button); border: 1px solid palette(Text); border-radius: 5px;";
	
  m_tmpParams = new TaudioParams();
  *m_tmpParams = *m_glParams;
#if defined (Q_OS_ANDROID)
  m_topList = new TlistMenu(QListWidget::LeftToRight, this);
  QStackedLayout *m_stackedLay = new QStackedLayout;
  m_stackedLay->setContentsMargins(0, 0, 0, 0);
  TtouchArea *m_1_device, *m_2_middleA, *m_3_advanced; // m_4_test is declared in header
#else
	m_toolBox = new QToolBox(this);
	QWidget *m_1_device, *m_2_middleA, *m_3_advanced; // m_4_test is declared in header
#endif
  
//################### 1. 	Input device & pitch detection #################################
#if defined (Q_OS_ANDROID)
  m_1_device = new TtouchArea(this);
  m_topList->addItem("1. " + tr("Input device and pitch detection"));
  m_stackedLay->addWidget(m_1_device);
#else
	m_1_device = new QWidget();
	m_toolBox->addItem(m_1_device, "1. " + tr("Input device and pitch detection"));
#endif
  QLabel *devLab = new QLabel(tr("input device"), m_1_device);
  m_inDeviceCombo = new QComboBox(m_1_device);
		m_inDeviceCombo->setStatusTip(tr("Be sure your input device (microphone, webcam, instrument, etc.) is plugged in, properly configured, and working."));
    m_inDeviceCombo->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Preferred);
	
#if !defined (Q_OS_ANDROID) && (defined (Q_OS_LINUX) || defined (Q_OS_WIN))
    m_JACK_ASIO_ChB = new QCheckBox(this);
  #if defined (Q_OS_WIN)
    m_JACK_ASIO_ChB->setText("ASIO");
  #elif defined (Q_OS_LINUX)
    m_JACK_ASIO_ChB->setText("JACK");
  #endif
    m_JACK_ASIO_ChB->setChecked(m_glParams->JACKorASIO);
#endif
	
	durHeadLab = new QLabel(tr("minimum note duration"), m_1_device);
	durationSpin = new QSpinBox(m_1_device);
		durationSpin->setMinimum(10);
		durationSpin->setMaximum(1000);
		durationSpin->setSuffix("   "  + tr("[milliseconds]"));
		durationSpin->setSingleStep(50);
		durationSpin->setValue(qRound(m_glParams->minDuration * 1000)); // minimum duration is stored in seconds but displayed in milliseconds
		durationSpin->setStatusTip(tr("Only sounds longer than the selected time will be pitch-detected.<br>Selecting a longer minimum note duration helps avoid capturing fret noise or other unexpected sounds but decreases responsiveness."));
  QLabel *volLabel = new QLabel(tr("minimum volume"), m_1_device);
  volumeSlider = new TvolumeSlider(m_1_device);
    volumeSlider->setValue(m_glParams->minimalVol);
    volumeSlider->setStatusTip(tr("Minimum volume of a sound to be pitch-detected"));

  TintonationCombo *intoCombo = new TintonationCombo(m_1_device);
    m_intonationCombo = intoCombo->accuracyCombo;
    m_intonationCombo->setCurrentIndex(m_glParams->intonation);

	// 1. Layout
	QVBoxLayout *deviceLay = new QVBoxLayout;
		QHBoxLayout *rtDevLay = new QHBoxLayout;
      rtDevLay->addWidget(devLab);
      rtDevLay->addWidget(m_inDeviceCombo);
#if !defined (Q_OS_ANDROID) && (defined (Q_OS_LINUX) || defined (Q_OS_WIN))
      rtDevLay->addWidget(m_JACK_ASIO_ChB);
#endif
		deviceLay->addLayout(rtDevLay);
#if defined (Q_OS_ANDROID)
    deviceLay->addWidget(getLabelFromStatus(m_inDeviceCombo, false, true));
    deviceLay->addStretch(2);
#endif

	QHBoxLayout *durLay = new QHBoxLayout;
// 		durLay->addStretch();
		durLay->addWidget(durHeadLab);
		durLay->addWidget(durationSpin, 0, Qt::AlignLeft);
// 		durLay->addStretch();
	deviceLay->addLayout(durLay);
#if defined (Q_OS_ANDROID)
//     durationSpin->setMinimumWidth(fontMetrics().width(durationSpin->suffix()) * 3);
    deviceLay->addWidget(getLabelFromStatus(durationSpin, true, true));
    deviceLay->addStretch(1);
#endif
  QHBoxLayout *volLay = new QHBoxLayout;
    volLay->addWidget(volLabel);
    volLay->addWidget(volumeSlider);
  deviceLay->addLayout(volLay);
#if defined (Q_OS_ANDROID)
    deviceLay->addWidget(getLabelFromStatus(volumeSlider));
    deviceLay->addStretch(1);
#endif
  deviceLay->addWidget(intoCombo);
  deviceLay->addStretch(1);
  m_1_device->setLayout(deviceLay);
		
//################### 2. Middle a & transposition #################################
#if defined (Q_OS_ANDROID)
  m_2_middleA = new TtouchArea(this);
  m_topList->addItem("2. " + tr("'Middle a' and transposition"));
  m_stackedLay->addWidget(m_2_middleA);
#else
	m_2_middleA = new QWidget();
	m_toolBox->addItem(m_2_middleA, "2. " + tr("'Middle a' and transposition"));
#endif
  QLabel *headLab = new QLabel("<table><tr><td valign=\"middle\">" + tr("middle A") + QString("&nbsp;&nbsp;&nbsp;%1</td></tr></table>").arg(wrapPixToHtml(Tnote(6, 1, 0), Tclef::e_treble_G, TkeySignature(0), 4.0)), m_2_middleA);
  QLabel *frLab = new QLabel(tr("frequency:"), m_2_middleA);
  
  freqSpin = new QSpinBox(m_2_middleA);
		freqSpin->setStatusTip(tr("The base frequency of <i>middle a</i>.<br>Detection of the proper pitch of notes is relative to this value. This also affects the pitch of played sounds.").replace(". ", ".<br>"));
		freqSpin->setMinimum(200);
		freqSpin->setMaximum(900);
		freqSpin->setSuffix(" Hz");
  frLab->setStatusTip(freqSpin->statusTip());
  
  QLabel *intervalLab = new QLabel(tr("interval:"), m_2_middleA);
  m_intervalSpin = new QSpinBox(m_2_middleA);
		m_intervalSpin->setRange(0, 12);
		m_intervalSpin->setSpecialValueText(tr("none"));
		m_intervalSpin->setMinimumWidth(fontMetrics().boundingRect("w").width() * 15); // width of ten letters 'w' 
		m_intervalSpin->setStatusTip(tr("Shifts the frequency of <i>middle a</i>. It can be used as a transposition.").replace(". ", ".<br>"));
	m_upSemiToneRadio = new QRadioButton(tr("up"), m_2_middleA);
		m_upSemiToneRadio->setIcon(QIcon(style()->standardIcon(QStyle::SP_ArrowUp)));
	m_downsSemitoneRadio = new QRadioButton(tr("down"), m_2_middleA);
		m_downsSemitoneRadio->setIcon(QIcon(style()->standardIcon(QStyle::SP_ArrowDown)));
  intervalLab->setStatusTip(m_intervalSpin->statusTip());
	QButtonGroup *upDownGroup = new QButtonGroup(m_2_middleA);
		upDownGroup->addButton(m_upSemiToneRadio);
		upDownGroup->addButton(m_downsSemitoneRadio);
	m_upSemiToneRadio->setChecked(true);
  
	tuneFreqlab = new TroundedLabel(m_2_middleA);
		tuneFreqlab->setAlignment(Qt::AlignCenter);
		QFont ff = tuneFreqlab->font();
		ff.setPixelSize(fontMetrics().boundingRect("A").height() * 1.2);
		tuneFreqlab->setFont(ff);
		tuneFreqlab->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
  
  // 2. Layout
	QGridLayout *midGrLay = new QGridLayout;
		midGrLay->addWidget(frLab, 0, 0);
		midGrLay->addWidget(freqSpin, 0, 1);
		midGrLay->addWidget(intervalLab, 1, 0);
		QVBoxLayout *upDownLay = new QVBoxLayout;
			upDownLay->addWidget(m_upSemiToneRadio);
			upDownLay->addWidget(m_downsSemitoneRadio);
		QHBoxLayout *intervalLay = new QHBoxLayout;
			intervalLay->addWidget(m_intervalSpin);
			intervalLay->addLayout(upDownLay);
		midGrLay->addLayout(intervalLay, 1, 1);
#if defined (Q_OS_ANDROID)
  QVBoxLayout *aLay = new QVBoxLayout;
#else
	QHBoxLayout *aLay = new QHBoxLayout;
#endif
		aLay->addWidget(headLab, 0, Qt::AlignCenter);
#if defined (Q_OS_ANDROID)
    aLay->addWidget(getLabelFromStatus(freqSpin, true, true));
#endif
		aLay->addLayout(midGrLay);
#if defined (Q_OS_ANDROID)
    aLay->addWidget(getLabelFromStatus(m_intervalSpin, true, true));
#endif
	QVBoxLayout *middleAlay = new QVBoxLayout();
		middleAlay->addLayout(aLay);
		middleAlay->addWidget(tuneFreqlab, 0, Qt::AlignCenter);
	m_2_middleA->setLayout(middleAlay);
	
//################### 3. Advanced #################################
#if defined (Q_OS_ANDROID)
  m_3_advanced = new TtouchArea(this);
  m_topList->addItem("3. " + tr("Advanced"));
  m_stackedLay->addWidget(m_3_advanced);
#else
  m_3_advanced = new QWidget();
  m_toolBox->addItem(m_3_advanced, "3. " + tr("Advanced"));
#endif
  QLabel *methodLab = new QLabel(tr("pitch detection mode"), m_3_advanced);
  m_methodCombo = new QComboBox(m_3_advanced);
    m_methodCombo->addItem("MPM");
    m_methodCombo->addItem("autocorrelation");
    m_methodCombo->addItem("MPM + modified cepstrum");
  if (m_glParams->detectMethod == e_MPM)
    m_methodCombo->setCurrentIndex(0);
  else if (m_glParams->detectMethod == e_AUTOCORRELATION)
    m_methodCombo->setCurrentIndex(1);
  else
    m_methodCombo->setCurrentIndex(2);

  m_splitVolChB = new QCheckBox(tr("split when volume rise"), this);
  m_splitVolChB->setStatusTip(tr("Helps to properly detect the same notes repeated quickly on the guitar."));
  m_splitVolSpin = new QSpinBox(this);
    m_splitVolSpin->setRange(5, 50);
    m_splitVolSpin->setSingleStep(5);
    m_splitVolSpin->setSuffix(" %");
    m_splitVolSpin->setStatusTip(m_splitVolChB->statusTip());
  if (m_glParams->minSplitVol > 0.0) {
    m_splitVolChB->setChecked(true);
    m_splitVolSpin->setValue(m_glParams->minSplitVol);
  } else {
    m_splitVolChB->setChecked(false);
    m_splitVolSpin->setDisabled(true);
  }

  m_skipStillerChB = new QCheckBox(tr("skip stiller than"), this);
    m_skipStillerChB->setStatusTip(tr("Skips stiller sounds, below given percent of average volume. It prevents detecting of harmonics on classical or acoustic guitar but requires playing with similar strength.").replace(". ", ".<br>"));
  m_skipStillerSpin = new QSpinBox(this);
    m_skipStillerSpin->setRange(10, 95);
    m_skipStillerSpin->setSingleStep(5);
    m_skipStillerSpin->setSuffix(" %");
    m_skipStillerSpin->setStatusTip(m_skipStillerChB->statusTip());
    m_skipStillerSpin->setValue(m_glParams->skipStillerVal);
    m_skipStillerChB->setChecked(m_glParams->skipStillerVal > 0.0);
    m_skipStillerSpin->setDisabled(m_glParams->skipStillerVal == 0.0);

  m_noiseFilterChB = new QCheckBox(tr("noise filter"), m_3_advanced);
    m_noiseFilterChB->setChecked(m_glParams->equalLoudness);
    m_noiseFilterChB->setStatusTip(tr("It is rather necessary for mic input but may be switched off for instrument line-in plugged with less noise."));

  QLabel *adjustLab = new QLabel(tr("adjust to instrument"),  m_3_advanced);
  m_adjustToInstrButt = new TselectInstrument(m_3_advanced, TselectInstrument::e_buttonsOnlyHorizontal);
#if defined (Q_OS_ANDROID)
    m_adjustToInstrButt->setGlyphSize(Tmtr::fingerPixels() * 0.8);
#else
    m_adjustToInstrButt->setGlyphSize(fontMetrics().height() * 2);
#endif

  //3. Layout
  QVBoxLayout *advLay = new QVBoxLayout;
    QHBoxLayout *methodLay = new QHBoxLayout;
      methodLay->addStretch();
      methodLay->addWidget(methodLab);
      methodLay->addWidget(m_methodCombo);
      methodLay->addStretch();
  advLay->addLayout(methodLay);
  advLay->addStretch();
  QHBoxLayout *splitLay = new QHBoxLayout;
    splitLay->addStretch();
    splitLay->addWidget(m_splitVolChB);
    splitLay->addWidget(m_splitVolSpin);
    splitLay->addStretch();
  advLay->addLayout(splitLay);
#if defined (Q_OS_ANDROID)
  advLay->addWidget(getLabelFromStatus(m_splitVolChB, false, true));
#endif
  advLay->addStretch();
  QHBoxLayout *skipLay = new QHBoxLayout;
    skipLay->addStretch();
    skipLay->addWidget(m_skipStillerChB);
    skipLay->addWidget(m_skipStillerSpin);
    skipLay->addStretch();
  advLay->addLayout(skipLay);
#if defined (Q_OS_ANDROID)
  advLay->addWidget(getLabelFromStatus(m_skipStillerChB, false, true));
#endif
  advLay->addStretch();
  advLay->addWidget(m_noiseFilterChB, 0, Qt::AlignCenter);
#if defined (Q_OS_ANDROID)
  advLay->addWidget(getLabelFromStatus(m_noiseFilterChB, true, true));
#endif
  advLay->addStretch(1);
  QHBoxLayout *adjustLay = new QHBoxLayout;
    adjustLay->addStretch();
    adjustLay->addWidget(adjustLab);
    adjustLay->addWidget(m_adjustToInstrButt);
    adjustLay->addStretch();
  advLay->addLayout(adjustLay);
  advLay->addStretch(1);
  m_3_advanced->setLayout(advLay);


//################### 4. Test the settings #################################
#if defined (Q_OS_ANDROID)
  m_4_test = new TtouchArea(this);
  m_topList->addItem("4. " + tr("Test the settings"));
  m_stackedLay->addWidget(m_4_test);
#else
	m_4_test = new QWidget();
	m_toolBox->addItem(m_4_test, "4. " + tr("Test the settings"));
#endif
  m_4_test->setStatusTip(tr("Check, are your audio input settings appropriate?<br>And how well does pitch detection work for your selected settings?"));
  
  testTxt = tr("Test");
  stopTxt = tr("Stop");
  
  testButt = new QPushButton(testTxt, m_4_test);
		testButt->setIconSize(QSize(48, 48));
  pitchView = new TpitchView(m_audioIn, m_4_test, false);
		pitchView->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
		pitchView->setFixedHeight(fontMetrics().boundingRect("A").height() * 5);
		pitchView->setPitchColor(Qt::darkGreen);
		pitchView->setMinimalVolume(m_glParams->minimalVol);
//     pitchView->enableAccuracyChange(false);
	
	QFont labFont = font();
	labFont.setPixelSize(fontMetrics().boundingRect("A").height() * 2);
  pitchLab = new TroundedLabel("--", this);
		pitchLab->setFont(labFont);
		pitchLab->setFixedWidth(fontMetrics().boundingRect("w").width() * 10);
		pitchLab->setStatusTip(tr("Detected pitch"));
		pitchLab->setAlignment(Qt::AlignCenter);
  
  freqLab = new TroundedLabel("--", this);
		freqLab->setFixedWidth(pitchLab->width() * 2);
		freqLab->setFont(labFont);
		freqLab->setAlignment(Qt::AlignCenter);
  getFreqStatusTip();
  
	// 4. Layout
	QHBoxLayout *labelsLay = new QHBoxLayout;
		labelsLay->addStretch();
		labelsLay->addWidget(testButt);
		labelsLay->addStretch();
		labelsLay->addWidget(pitchLab);
		labelsLay->addStretch();
		labelsLay->addWidget(freqLab);
		labelsLay->addStretch();
	QVBoxLayout *testLay = new QVBoxLayout;
#if defined (Q_OS_ANDROID)
    testLay->addWidget(getLabelFromStatus(m_4_test, false, true));
#endif
		testLay->addStretch();
		testLay->addLayout(labelsLay);
		testLay->addStretch();
		testLay->addWidget(pitchView);
		testLay->addStretch();
	m_4_test->setLayout(testLay);
  
  // Whole layout
	QVBoxLayout *inLay = new QVBoxLayout();
#if defined (Q_OS_ANDROID)
  inLay->addWidget(m_topList);
  inLay->addLayout(m_stackedLay);
  inLay->setContentsMargins(0, 0, 0, 0);
  m_stackedLay->setCurrentIndex(0);
  m_topList->setCurrentRow(0);
  connect(m_topList, &TlistMenu::currentRowChanged, m_stackedLay, &QStackedLayout::setCurrentIndex);
  m_topList->adjustItemsLayout(100);
#else
  inLay->addWidget(m_toolBox);
#endif
	enableInBox = new QGroupBox(tr("enable pitch detection"), this);
  enableInBox->setLayout(inLay);
	QVBoxLayout *lay = new QVBoxLayout();
  lay->setContentsMargins(0, 0, 0, 0);
  lay->addWidget(enableInBox);
  setLayout(lay);
  
  m_testDisabled = false;
  setTestDisabled(true);
	enableInBox->setCheckable(true);
  enableInBox->setChecked(m_glParams->INenabled);
	freqSpin->setValue(getFreq(440.0));
	intervalFromFreq(freqSpin->value());
  
  connect(testButt, SIGNAL(clicked()), this, SLOT(testSlot()));
  connect(m_intervalSpin, SIGNAL(valueChanged(int)), this, SLOT(intervalChanged()));
	connect(m_upSemiToneRadio, SIGNAL(clicked(bool)), this, SLOT(upDownIntervalSlot()));
	connect(m_downsSemitoneRadio, SIGNAL(clicked(bool)), this, SLOT(upDownIntervalSlot()));
  connect(freqSpin, SIGNAL(valueChanged(int)), this, SLOT(baseFreqChanged(int)));
  connect(volumeSlider, SIGNAL(valueChanged(float)), this, SLOT(minimalVolChanged(float)));
#if defined (Q_OS_ANDROID)
  connect(m_topList,  &TlistMenu::currentRowChanged, this, &AudioInSettings::testSlot);
#else
  connect(m_toolBox, SIGNAL(currentChanged(int)), this, SLOT(testSlot()));
  #if defined (Q_OS_LINUX) || defined (Q_OS_WIN)
    connect(m_JACK_ASIO_ChB, &QCheckBox::clicked, this, &AudioInSettings::JACKASIOSlot);
  #endif
#endif
  connect(enableInBox, &QGroupBox::clicked, this, &AudioInSettings::testSlot);
  connect(m_splitVolChB, &QCheckBox::toggled, this, &AudioInSettings::splitByVolChanged);
  connect(m_skipStillerChB, &QCheckBox::toggled, this, &AudioInSettings::skipStillerChanged);
  connect(m_adjustToInstrButt, &TselectInstrument::instrumentChanged, this, &AudioInSettings::adjustInstrSlot);
#if defined(Q_OS_WIN)
  connect(m_inDeviceCombo, SIGNAL(currentIndexChanged(int)), this, SIGNAL(asioDriverChanged(int)));
#endif
}
示例#6
0
//-----------------------------------------------------------------------------
// Function: CodeEditorSettingsPage::setupLayout()
//-----------------------------------------------------------------------------
void CodeEditorSettingsPage::setupLayout()
{
    // Create the indentation group and all of its widgets.
    QGroupBox* indentGroup = new QGroupBox(tr("Indentation"), this);

    QLabel* indentWidthLabel = new QLabel(tr("Indent width:"), indentGroup);
    indentWidthEdit_ = new QLineEdit(indentGroup);
    indentWidthEdit_->setFixedWidth(40);
    indentWidthEdit_->setValidator(new QRegExpValidator(QRegExp("^\\d+$"), this));

    QHBoxLayout* widthLayout = new QHBoxLayout();
    widthLayout->addWidget(indentWidthLabel);
    widthLayout->addWidget(indentWidthEdit_);
    widthLayout->addStretch(1);

    indentStyleRadioButtons_[INDENT_STYLE_TAB] = new QRadioButton(tr("Use tabs"), indentGroup);
    indentStyleRadioButtons_[INDENT_STYLE_SPACES] = new QRadioButton(tr("Use spaces"), indentGroup);

    QVBoxLayout* indentLayout = new QVBoxLayout(indentGroup);
    indentLayout->addLayout(widthLayout);
    indentLayout->addWidget(indentStyleRadioButtons_[INDENT_STYLE_TAB]);
    indentLayout->addWidget(indentStyleRadioButtons_[INDENT_STYLE_SPACES]);

    // Create the font & colors group and all of its widgets.
    QGroupBox* fontColorGroup = new QGroupBox(tr("Font and Colors"), this);

    QLabel* fontLabel = new QLabel(tr("Font:"), fontColorGroup);
    fontCombo_ = new QFontComboBox(fontColorGroup);
    fontCombo_->setWritingSystem(QFontDatabase::Latin);
    fontCombo_->setFixedWidth(320);

    QLabel* fontSizeLabel = new QLabel(tr("Size:"), fontColorGroup);
    fontSizeCombo_ = new QComboBox(fontColorGroup);
    fontSizeCombo_->setFixedWidth(80);
    fontSizeCombo_->setMaxVisibleItems(MAX_FONT_SIZE - MIN_FONT_SIZE + 1);

    for (int size = MIN_FONT_SIZE; size <= MAX_FONT_SIZE; ++size)
    {
        fontSizeCombo_->addItem(QString::number(size));
    }

    QGridLayout* fontLayout = new QGridLayout();
    fontLayout->addWidget(fontLabel, 0, 0, 1, 1, Qt::AlignLeft);
    fontLayout->addWidget(fontCombo_, 1, 0, 1, 1, Qt::AlignLeft);
    fontLayout->addWidget(fontSizeLabel, 0, 1, 1, 1, Qt::AlignLeft);
    fontLayout->addWidget(fontSizeCombo_, 1, 1, 1, 1, Qt::AlignLeft);
    fontLayout->setColumnStretch(1, 1);

    QLabel* highlightLabel = new QLabel(tr("Syntax highlight for:"), fontColorGroup);
    highlightTypeList_ = new QListWidget(fontColorGroup);
    highlightTypeList_->setFixedWidth(208);


    for (int i = 0; i < CSourceHighlighter::STYLE_COUNT; ++i)
    {
        highlightTypeList_->addItem(STYLE_NAMES[i]);
    }

    QLabel* colorLabel = new QLabel(tr("Color:"), fontColorGroup);
    colorBox_ = new ColorBox(QSize(56, 56), fontColorGroup);

    boldCheckBox_ = new QCheckBox(tr("Bold"), fontColorGroup);

    italicCheckBox_ = new QCheckBox(tr("Italic"), fontColorGroup);  

    QVBoxLayout* checkLayout = new QVBoxLayout();
    checkLayout->addWidget(boldCheckBox_);
    checkLayout->addWidget(italicCheckBox_);

    QLabel* sampleLabel = new QLabel(tr("Sample:"), fontColorGroup);
    sampleBox_ = new ColorBox(QSize(208, 44), fontColorGroup);
    sampleBox_->setColor(Qt::white);
    sampleBox_->setText("AaBbCcXxYyZz");

    QVBoxLayout* sampleLayout = new QVBoxLayout();
    sampleLayout->addWidget(sampleLabel);
    sampleLayout->addWidget(sampleBox_);

    QGridLayout* colorLayout = new QGridLayout();
    colorLayout->addWidget(highlightLabel, 0, 0, 1, 1, Qt::AlignLeft);
    colorLayout->addWidget(highlightTypeList_, 1, 0, 2, 1, Qt::AlignLeft);
    colorLayout->addWidget(colorLabel, 0, 1, 1, 1, Qt::AlignLeft);
    colorLayout->addWidget(colorBox_, 1, 1, 1, 1, Qt::AlignLeft | Qt::AlignTop);
    colorLayout->addLayout(checkLayout, 1, 2, 1, 1, Qt::AlignLeft | Qt::AlignTop);
    colorLayout->addLayout(sampleLayout, 2, 1, 1, 2, Qt::AlignLeft | Qt::AlignTop);
    colorLayout->setColumnStretch(2, 1);

    QVBoxLayout* fontColorLayout = new QVBoxLayout(fontColorGroup);
    fontColorLayout->addLayout(fontLayout);
    fontColorLayout->addSpacing(12);
    fontColorLayout->addLayout(colorLayout);

    // Setup the layout.
    QVBoxLayout* layout = new QVBoxLayout(this);
    layout->addWidget(indentGroup);
    layout->addWidget(fontColorGroup);
    layout->addStretch(1);
}
示例#7
0
void mtsRobotIO1394QtWidget::setupUi(void)
{
    QFont font;
    font.setBold(true);

    // Power commands
    QVBoxLayout * powerLayout = new QVBoxLayout;
    QFrame * powerFrame = new QFrame;
    QLabel * powerTitle = new QLabel("Power");
    powerTitle->setFont(font);
    powerTitle->setAlignment(Qt::AlignCenter);
    powerLayout->addWidget(powerTitle);
    QCBEnableAll = new QCheckBox("Enable all");
    powerLayout->addWidget(QCBEnableAll);
    QCBEnableAmps = new QCheckBox("Enable boards");
    powerLayout->addWidget(QCBEnableAmps);
    powerLayout->addSpacing(5);
    QLAmpStatus = new QLabel("Actuators ON");
    QLAmpStatus->setAlignment(Qt::AlignCenter);
    powerLayout->addWidget(QLAmpStatus);
    QLPowerStatus = new QLabel("Boards ON");
    QLPowerStatus->setAlignment(Qt::AlignCenter);
    powerLayout->addWidget(QLPowerStatus);
    powerLayout->addStretch();
    powerFrame->setLayout(powerLayout);
    powerFrame->setFrameStyle(QFrame::StyledPanel | QFrame::Sunken);

    // watchdog commands
    QVBoxLayout * watchdogLayout = new QVBoxLayout;
    QFrame * watchdogFrame = new QFrame;
    QLabel * watchdogTitle = new QLabel("Watchdog");
    watchdogTitle->setFont(font);
    watchdogTitle->setAlignment(Qt::AlignCenter);
    watchdogLayout->addWidget(watchdogTitle);
    QHBoxLayout * watchdogSetLayout = new QHBoxLayout;
    {
        QLabel * wdogLabel = new QLabel("Wdog period (ms)");
        QSBWatchdogPeriod = new QDoubleSpinBox;
        QSBWatchdogPeriod->setMaximum(340.0); // max wdog_period = 340 ms
        QSBWatchdogPeriod->setMinimum(0.0);
        QSBWatchdogPeriod->setSingleStep(0.05);
        QSBWatchdogPeriod->setValue(cmnInternalTo_ms(WatchdogPeriodInSeconds));
        watchdogSetLayout->addWidget(wdogLabel);
        watchdogSetLayout->addWidget(QSBWatchdogPeriod);
    }
    watchdogLayout->addLayout(watchdogSetLayout);
    watchdogLayout->addSpacing(5);
    QLSafetyRelay = new QLabel("Safety relay ON");
    QLSafetyRelay->setAlignment(Qt::AlignCenter);
    watchdogLayout->addWidget(QLSafetyRelay);
    QLWatchdog = new QLabel("Watchdog Timeout FALSE");
    QLWatchdog->setAlignment(Qt::AlignCenter);
    QLWatchdog->setStyleSheet("QLabel { background-color: green }");
    watchdogLayout->addWidget(QLWatchdog);
    QLWatchdogLastTimeout = new QLabel("Last timeout: n/a");
    QLWatchdogLastTimeout->setAlignment(Qt::AlignCenter);
    watchdogLayout->addWidget(QLWatchdogLastTimeout);
    watchdogLayout->addStretch();
    watchdogFrame->setLayout(watchdogLayout);
    watchdogFrame->setFrameStyle(QFrame::StyledPanel | QFrame::Sunken);

    // Encoder commands
    QVBoxLayout * encoderLayout = new QVBoxLayout;
    QFrame * encoderFrame = new QFrame;
    QLabel * encoderTitle = new QLabel("Encoders");
    encoderTitle->setFont(font);
    encoderTitle->setAlignment(Qt::AlignCenter);
    encoderLayout->addWidget(encoderTitle);
    QPBResetEncAll = new QPushButton("Reset all");
    encoderLayout->addWidget(QPBResetEncAll);
    QPBBiasEncAll = new QPushButton("Bias from potentiometers");
    encoderLayout->addWidget(QPBBiasEncAll);
    encoderLayout->addStretch();
    encoderFrame->setLayout(encoderLayout);
    encoderFrame->setFrameStyle(QFrame::StyledPanel | QFrame::Sunken);

    // Current comands
    QVBoxLayout * currentLayout = new QVBoxLayout;
    QFrame * currentFrame = new QFrame;
    QLabel * currentTitle = new QLabel("Current");
    currentTitle->setFont(font);
    currentTitle->setAlignment(Qt::AlignCenter);
    currentLayout->addWidget(currentTitle);
    QCBEnableDirectControl = new QCheckBox("Direct control");
    currentLayout->addWidget(QCBEnableDirectControl);
    currentLayout->addStretch();
    QLabel * serialTitle = new QLabel("Serial Number");
    serialTitle->setFont(font);
    serialTitle->setAlignment(Qt::AlignCenter);
    currentLayout->addWidget(serialTitle);
    QLSerialNumber = new QLabel("-----");
    QLSerialNumber->setAlignment(Qt::AlignCenter);
    currentLayout->addWidget(QLSerialNumber);
    currentLayout->addStretch();
    currentFrame->setLayout(currentLayout);
    currentFrame->setFrameStyle(QFrame::StyledPanel | QFrame::Sunken);

    // Timing
    QVBoxLayout * timingLayout = new QVBoxLayout;
    QFrame * timingFrame = new QFrame;
    QLabel * timingTitle = new QLabel("Timing");
    timingTitle->setFont(font);
    timingTitle->setAlignment(Qt::AlignCenter);
    timingLayout->addWidget(timingTitle);
    QMIntervalStatistics = new mtsQtWidgetIntervalStatistics();
    timingLayout->addWidget(QMIntervalStatistics);
    timingLayout->addStretch();
    timingFrame->setLayout(timingLayout);
    timingFrame->setFrameStyle(QFrame::StyledPanel | QFrame::Sunken);

    // Commands layout
    QHBoxLayout * commandLayout = new QHBoxLayout;
    commandLayout->addWidget(powerFrame);
    commandLayout->addWidget(watchdogFrame);
    commandLayout->addWidget(encoderFrame);
    commandLayout->addWidget(currentFrame);
    commandLayout->addWidget(timingFrame);

    // Feedbacks Label
    QGridLayout * gridLayout = new QGridLayout;
    gridLayout->setSpacing(1);
    int row = 0;

    if (NumberOfActuators != 0) {

        vctBoolVec defaultEnable(NumberOfActuators, false);
        vctDoubleVec defaultCurrent(NumberOfActuators, 0.0);

        gridLayout->addWidget(new QLabel("Actuator power"), row, 0);
        QVWActuatorCurrentEnableEachWidget = new vctQtWidgetDynamicVectorBoolWrite();
        QVWActuatorCurrentEnableEachWidget->SetValue(defaultEnable);
        gridLayout->addWidget(QVWActuatorCurrentEnableEachWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Desired current (mA)"), row, 0);
        QVWActuatorCurrentSpinBoxWidget = new vctQtWidgetDynamicVectorDoubleWrite(vctQtWidgetDynamicVectorDoubleWrite::SPINBOX_WIDGET);
        QVWActuatorCurrentSpinBoxWidget->SetValue(defaultCurrent);
        gridLayout->addWidget(QVWActuatorCurrentSpinBoxWidget, row, 1);
        row++;

        QPBResetCurrentAll = new QPushButton("Reset current");
        gridLayout->addWidget(QPBResetCurrentAll, row, 0);
        QVWActuatorCurrentSliderWidget = new vctQtWidgetDynamicVectorDoubleWrite(vctQtWidgetDynamicVectorDoubleWrite::SLIDER_WIDGET);
        QVWActuatorCurrentSliderWidget->SetValue(defaultCurrent);
        gridLayout->addWidget(QVWActuatorCurrentSliderWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Current feedback (mA)"), row, 0);
        QVRActuatorCurrentFeedbackWidget = new vctQtWidgetDynamicVectorDoubleRead();
        gridLayout->addWidget(QVRActuatorCurrentFeedbackWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Joint positions (deg)"), row, 0);
        QVRJointPositionWidget = new vctQtWidgetDynamicVectorDoubleRead();
        gridLayout->addWidget(QVRJointPositionWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Actuator positions (deg)"), row, 0);
        QVRActuatorPositionWidget = new vctQtWidgetDynamicVectorDoubleRead();
        gridLayout->addWidget(QVRActuatorPositionWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Velocities (deg/s)"), row, 0);
        QVRActuatorVelocityWidget = new vctQtWidgetDynamicVectorDoubleRead();
        gridLayout->addWidget(QVRActuatorVelocityWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Analog inputs (V)"), row, 0);
        QVRPotVoltsWidget = new vctQtWidgetDynamicVectorDoubleRead();
        gridLayout->addWidget(QVRPotVoltsWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Potentiometers (deg)"), row, 0);
        QVRPotPositionWidget = new vctQtWidgetDynamicVectorDoubleRead();
        gridLayout->addWidget(QVRPotPositionWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Amp temperature (C)"), row, 0);
        QVRActuatorAmpTemperature = new vctQtWidgetDynamicVectorDoubleRead();
        gridLayout->addWidget(QVRActuatorAmpTemperature, row, 1);
        row++;
    }

    if (NumberOfBrakes != 0) {

        vctBoolVec defaultEnable(NumberOfBrakes, false);

        gridLayout->addWidget(new QLabel("Brakes"), row, 0);
        QHBoxLayout * brakeButtonsLayout = new QHBoxLayout();
        QPBBrakeRelease =  new QPushButton("Release");
        brakeButtonsLayout->addWidget(QPBBrakeRelease);
        QPBBrakeEngage =  new QPushButton("Engage");
        brakeButtonsLayout->addWidget(QPBBrakeEngage);
        gridLayout->addLayout(brakeButtonsLayout, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Brake power"), row, 0);
        QVWBrakeCurrentEnableEachWidget = new vctQtWidgetDynamicVectorBoolWrite();
        QVWBrakeCurrentEnableEachWidget->SetValue(defaultEnable);
        gridLayout->addWidget(QVWBrakeCurrentEnableEachWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Current desired (mA)"), row, 0);
        QVRBrakeCurrentCommandWidget = new vctQtWidgetDynamicVectorDoubleRead();
        gridLayout->addWidget(QVRBrakeCurrentCommandWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Current feedback (mA)"), row, 0);
        QVRBrakeCurrentFeedbackWidget = new vctQtWidgetDynamicVectorDoubleRead();
        gridLayout->addWidget(QVRBrakeCurrentFeedbackWidget, row, 1);
        row++;

        gridLayout->addWidget(new QLabel("Amp temperature (C)"), row, 0);
        QVRBrakeAmpTemperature = new vctQtWidgetDynamicVectorDoubleRead();
        gridLayout->addWidget(QVRBrakeAmpTemperature, row, 1);
        row++;
    }

    // main layout
    QVBoxLayout * mainLayout = new QVBoxLayout;
    mainLayout->addLayout(commandLayout);
    mainLayout->addLayout(gridLayout);
    mainLayout->addStretch();

    setLayout(mainLayout);

    setWindowTitle(QString(this->GetName().c_str()));
    resize(sizeHint());

    // connect signals & slots
    connect(QCBEnableAmps, SIGNAL(toggled(bool)), this, SLOT(SlotEnableAmps(bool)));
    connect(QCBEnableAll, SIGNAL(toggled(bool)), this, SLOT(SlotEnableAll(bool)));
    connect(QCBEnableDirectControl, SIGNAL(toggled(bool)), this, SLOT(SlotEnableDirectControl(bool)));
    connect(QPBResetCurrentAll, SIGNAL(clicked()), this, SLOT(SlotResetCurrentAll()));
    connect(QPBResetEncAll, SIGNAL(clicked()), this, SLOT(SlotResetEncodersAll()));
    connect(QPBBiasEncAll, SIGNAL(clicked()), this, SLOT(SlotBiasEncodersAll()));
    connect(QSBWatchdogPeriod, SIGNAL(valueChanged(double)),
            this, SLOT(SlotWatchdogPeriod(double)));
    connect(QVWActuatorCurrentEnableEachWidget, SIGNAL(valueChanged()), this, SLOT(SlotActuatorAmpEnable()));
    connect(QVWActuatorCurrentSpinBoxWidget, SIGNAL(valueChanged()), this, SLOT(SlotActuatorCurrentValueChanged()));
    connect(QVWActuatorCurrentSliderWidget, SIGNAL(valueChanged()), this, SLOT(SlotSliderActuatorCurrentValueChanged()));

    if (NumberOfBrakes != 0) {
        connect(QPBBrakeRelease, SIGNAL(clicked()), this, SLOT(SlotBrakeRelease()));
        connect(QPBBrakeEngage, SIGNAL(clicked()), this, SLOT(SlotBrakeEngage()));
        connect(QVWBrakeCurrentEnableEachWidget, SIGNAL(valueChanged()), this, SLOT(SlotBrakeAmpEnable()));
    }

    // connect cisstMultiTask events
    connect(this, SIGNAL(SignalPowerStatus(bool)), this, SLOT(SlotPowerStatus(bool)));
    connect(this, SIGNAL(SignalWatchdogStatus(bool)), this, SLOT(SlotWatchdogStatus(bool)));

    // set initial value
    QCBEnableAmps->setChecked(false);
    QCBEnableAll->setChecked(false);
    QCBEnableDirectControl->setChecked(DirectControl);
    SlotEnableDirectControl(DirectControl);
}
示例#8
0
PolynomFitDialog::PolynomFitDialog( QWidget* parent, Qt::WFlags fl )
  : QDialog( parent, fl ), graph(NULL)
{
    setName( "PolynomFitDialog" );
    setWindowTitle(tr("MantidPlot - Polynomial Fit Options"));
    setSizeGripEnabled( true );

    QGroupBox *gb1 = new QGroupBox();
    QGridLayout *gl1 = new QGridLayout(gb1);
    gl1->addWidget(new QLabel(tr("Polynomial Fit of")), 0, 0);

    boxName = new QComboBox();
    gl1->addWidget(boxName, 0, 1);

    gl1->addWidget(new QLabel( tr("Order (1 - 9, 1 = linear)")), 1, 0);
    boxOrder = new QSpinBox();
    boxOrder->setRange(1, 9);
    boxOrder->setValue(2);
    gl1->addWidget(boxOrder, 1, 1);

    gl1->addWidget(new QLabel( tr("Fit curve # pts")), 2, 0);
    boxPoints = new QSpinBox();
    boxPoints->setRange(1, 1000);
    boxPoints->setSingleStep(50);
    boxPoints->setSpecialValueText(tr("Not enough points"));
    gl1->addWidget(boxPoints, 2, 1);

    gl1->addWidget(new QLabel( tr("Fit curve Xmin")), 3, 0);
    boxStart = new QLineEdit(tr("0"));
    gl1->addWidget(boxStart, 3, 1);

    gl1->addWidget(new QLabel( tr("Fit curve Xmax")), 4, 0);
    boxEnd = new QLineEdit();
    gl1->addWidget(boxEnd, 4, 1);

    gl1->addWidget(new QLabel( tr("Color")), 5, 0);
    boxColor = new ColorBox();
    boxColor->setColor(QColor(Qt::red));
    gl1->addWidget(boxColor, 5, 1);

    boxShowFormula = new QCheckBox(tr( "Show Formula on Graph?" ));
    boxShowFormula->setChecked( false );
    gl1->addWidget(boxShowFormula, 6, 1);
    gl1->setRowStretch(7, 1);

    buttonFit = new QPushButton(tr( "&Fit" ));
    buttonFit->setDefault( true );

    buttonCancel = new QPushButton(tr( "&Close" ));

    QVBoxLayout* vl = new QVBoxLayout();
    vl->addWidget(buttonFit);
    vl->addWidget(buttonCancel);
    vl->addStretch();

    QHBoxLayout* hlayout = new QHBoxLayout(this);
    hlayout->addWidget(gb1);
    hlayout->addLayout(vl);

    connect( buttonFit, SIGNAL( clicked() ), this, SLOT( fit() ) );
    connect( buttonCancel, SIGNAL( clicked() ), this, SLOT( reject() ) );
    connect( boxName, SIGNAL( activated(const QString&) ), this, SLOT(activateCurve(const QString&)));
}
示例#9
0
QWidget *ConfigDialog::createMainWidget()
{
    logMessage("ConfigDialog::createMainWidget()");

    QWidget *mainWidget = new QWidget(this);

    // general
    cmbGUIStyle = new QComboBox(mainWidget);
    cmbGUIStyle->addItems(QStyleFactory::keys());
    cmbGUIStyle->addItem("Manhattan");

    cmbLanguage = new QComboBox(mainWidget);
    cmbLanguage->addItems(availableLanguages());

    cmbDefaultPhysicField = new QComboBox();
    fillComboBoxPhysicField(cmbDefaultPhysicField);

    QGridLayout *layoutGeneral = new QGridLayout();
    layoutGeneral->addWidget(new QLabel(tr("UI:")), 0, 0);
    layoutGeneral->addWidget(cmbGUIStyle, 0, 1);
    layoutGeneral->addWidget(new QLabel(tr("Language:")), 1, 0);
    layoutGeneral->addWidget(cmbLanguage, 1, 1);
    layoutGeneral->addWidget(new QLabel(tr("Default physic field:")), 2, 0);
    layoutGeneral->addWidget(cmbDefaultPhysicField, 2, 1);

    QGroupBox *grpGeneral = new QGroupBox(tr("General"));
    grpGeneral->setLayout(layoutGeneral);

    // collaboration
    txtCollaborationServerURL = new SLineEditDouble();

    QVBoxLayout *layoutCollaboration = new QVBoxLayout();
    layoutCollaboration->addWidget(new QLabel(tr("Collaboration server URL:")));
    layoutCollaboration->addWidget(txtCollaborationServerURL);

    QGroupBox *grpCollaboration = new QGroupBox(tr("Collaboration"));
    grpCollaboration->setLayout(layoutCollaboration);

    // logs
    chkEnabledApplicationLog = new QCheckBox(tr("Enabled application log"));
    chkEnabledProgressLog = new QCheckBox(tr("Enabled progress log"));

    cmdClearApplicationLog = new QPushButton(mainWidget);
    cmdClearApplicationLog->setText(tr("Clear application log"));
    connect(cmdClearApplicationLog, SIGNAL(clicked()), this, SLOT(doClearApplicationLog()));

    cmdClearCommandHistory = new QPushButton(mainWidget);
    cmdClearCommandHistory->setText(tr("Clear command history"));
    connect(cmdClearCommandHistory, SIGNAL(clicked()), this, SLOT(doClearCommandHistory()));

    QGridLayout *layoutClearButtons = new QGridLayout();
    layoutClearButtons->addWidget(cmdClearApplicationLog, 0, 0);
    layoutClearButtons->addWidget(cmdClearCommandHistory, 0, 1);

    QVBoxLayout *layoutLogs = new QVBoxLayout();
    layoutLogs->addWidget(chkEnabledProgressLog);
    layoutLogs->addWidget(chkEnabledApplicationLog);
    layoutLogs->addLayout(layoutClearButtons);

    QGroupBox *grpLogs = new QGroupBox(tr("Logs"));
    grpLogs->setLayout(layoutLogs);

    // other
    chkLineEditValueShowResult = new QCheckBox(tr("Show value result in line edit input"));
    chkCheckVersion = new QCheckBox(tr("Check new version during startup."));
    chkExperimentalFeatures = new QCheckBox(tr("Enable experimental features"));
    chkExperimentalFeatures->setToolTip(tr("Warning: Agros2D should be unstable!"));

    QVBoxLayout *layoutOther = new QVBoxLayout();
    layoutOther->addWidget(chkLineEditValueShowResult);
    layoutOther->addWidget(chkCheckVersion);
    layoutOther->addWidget(chkExperimentalFeatures);

    QGroupBox *grpOther = new QGroupBox(tr("Other"));
    grpOther->setLayout(layoutOther);

    // layout
    QVBoxLayout *layout = new QVBoxLayout();
    layout->addWidget(grpGeneral);
    layout->addWidget(grpCollaboration);
    layout->addWidget(grpLogs);
    layout->addWidget(grpOther);
    layout->addStretch();

    mainWidget->setLayout(layout);

    return mainWidget;
}
示例#10
0
KActionSelector::KActionSelector( QWidget *parent, const char *name )
  : QWidget( parent, name )
{
  d = new KActionSelectorPrivate();
  d->moveOnDoubleClick = true;
  d->keyboardEnabled = true;
  d->iconSize = SmallIcon;
  d->addIcon = QApplication::reverseLayout()? "back" : "forward";
  d->removeIcon = QApplication::reverseLayout()? "forward" : "back";
  d->upIcon = "up";
  d->downIcon = "down";
  d->availableInsertionPolicy = Sorted;
  d->selectedInsertionPolicy = BelowCurrent;
  d->showUpDownButtons = true;

  //int isz = IconSize( KIcon::Small );

  QHBoxLayout *lo = new QHBoxLayout( this );
  lo->setSpacing( KDialog::spacingHint() );

  QVBoxLayout *loAv = new QVBoxLayout( lo );
  d->lAvailable = new QLabel( i18n("&Available:"), this );
  loAv->addWidget( d->lAvailable );
  d->availableListBox = new QListBox( this );
  loAv->addWidget( d->availableListBox );
  d->lAvailable->setBuddy( d->availableListBox );

  QVBoxLayout *loHBtns = new QVBoxLayout( lo );
  loHBtns->addStretch( 1 );
  d->btnAdd = new QToolButton( this );
  loHBtns->addWidget( d->btnAdd );
  d->btnRemove = new QToolButton( this );
  loHBtns->addWidget( d->btnRemove );
  loHBtns->addStretch( 1 );

  QVBoxLayout *loS = new QVBoxLayout( lo );
  d->lSelected = new QLabel( i18n("&Selected:"), this );
  loS->addWidget( d->lSelected );
  d->selectedListBox = new QListBox( this );
  loS->addWidget( d->selectedListBox );
  d->lSelected->setBuddy( d->selectedListBox );

  QVBoxLayout *loVBtns = new QVBoxLayout( lo );
  loVBtns->addStretch( 1 );
  d->btnUp = new QToolButton( this );
  d->btnUp->setAutoRepeat( true );
  loVBtns->addWidget( d->btnUp );
  d->btnDown = new QToolButton( this );
  d->btnDown->setAutoRepeat( true );
  loVBtns->addWidget( d->btnDown );
  loVBtns->addStretch( 1 );

  loadIcons();

  connect( d->btnAdd, SIGNAL(clicked()), this, SLOT(buttonAddClicked()) );
  connect( d->btnRemove, SIGNAL(clicked()), this, SLOT(buttonRemoveClicked()) );
  connect( d->btnUp, SIGNAL(clicked()), this, SLOT(buttonUpClicked()) );
  connect( d->btnDown, SIGNAL(clicked()), this, SLOT(buttonDownClicked()) );
  connect( d->availableListBox, SIGNAL(doubleClicked(QListBoxItem*)),
           this, SLOT(itemDoubleClicked(QListBoxItem*)) );
  connect( d->selectedListBox, SIGNAL(doubleClicked(QListBoxItem*)),
           this, SLOT(itemDoubleClicked(QListBoxItem*)) );
  connect( d->availableListBox, SIGNAL(currentChanged(QListBoxItem*)),
           this, SLOT(slotCurrentChanged(QListBoxItem *)) );
  connect( d->selectedListBox, SIGNAL(currentChanged(QListBoxItem*)),
           this, SLOT(slotCurrentChanged(QListBoxItem *)) );

  d->availableListBox->installEventFilter( this );
  d->selectedListBox->installEventFilter( this );
}
void SceneTransformDialog::createControls()
{
    logMessage("SceneTransformDialog::createControls()");

    // translate
    txtTranslateX = new ValueLineEdit();
    txtTranslateY = new ValueLineEdit();

    lstTranslateX = new QLabel();
    lstTranslateY = new QLabel();

    QGridLayout *layoutTranslate = new QGridLayout();
    layoutTranslate->addWidget(lstTranslateX, 0, 0);
    layoutTranslate->addWidget(txtTranslateX, 0, 1);
    layoutTranslate->addWidget(lstTranslateY, 1, 0);
    layoutTranslate->addWidget(txtTranslateY, 1, 1);
    layoutTranslate->addWidget(new QLabel(""), 2, 0);

    widTranslate = new QWidget();
    widTranslate->setLayout(layoutTranslate);

    // rotate
    txtRotateBasePointX = new ValueLineEdit();
    txtRotateBasePointY = new ValueLineEdit();
    txtRotateAngle = new ValueLineEdit();

    lstRotateBasePointX = new QLabel();
    lstRotateBasePointY = new QLabel();

    QGridLayout *layoutRotate = new QGridLayout();
    layoutRotate->addWidget(lstRotateBasePointX, 0, 0);
    layoutRotate->addWidget(txtRotateBasePointX, 0, 1);
    layoutRotate->addWidget(lstRotateBasePointY, 1, 0);
    layoutRotate->addWidget(txtRotateBasePointY, 1, 1);
    layoutRotate->addWidget(new QLabel(tr("Angle:")), 2, 0);
    layoutRotate->addWidget(txtRotateAngle, 2, 1);

    widRotate = new QWidget();
    widRotate->setLayout(layoutRotate);

    // scale
    txtScaleBasePointX = new ValueLineEdit();
    txtScaleBasePointY = new ValueLineEdit();
    txtScaleFactor = new ValueLineEdit();

    lstScaleBasePointX = new QLabel();
    lstScaleBasePointY = new QLabel();

    QGridLayout *layoutScale = new QGridLayout();
    layoutScale->addWidget(lstScaleBasePointX, 0, 0);
    layoutScale->addWidget(txtScaleBasePointX, 0, 1);
    layoutScale->addWidget(lstScaleBasePointY, 1, 0);
    layoutScale->addWidget(txtScaleBasePointY, 1, 1);
    layoutScale->addWidget(new QLabel(tr("Scaling factor:")), 2, 0);
    layoutScale->addWidget(txtScaleFactor, 2, 1);

    widScale = new QWidget();
    widScale->setLayout(layoutScale);

    // copy
    chkCopy = new QCheckBox(tr("Copy objects"));

    // dialog buttons    
    QPushButton *btnApply = new QPushButton(tr("Apply"));
    btnApply->setDefault(true);
    connect(btnApply, SIGNAL(clicked()), this, SLOT(doTransform()));
    QPushButton *btnClose = new QPushButton(tr("Close"));
    connect(btnClose, SIGNAL(clicked()), this, SLOT(doClose()));

    QHBoxLayout *layoutButtonBox = new QHBoxLayout();
    layoutButtonBox->addStretch();
    layoutButtonBox->addWidget(btnApply);
    layoutButtonBox->addWidget(btnClose);

    // tab widget
    tabWidget = new QTabWidget();
    tabWidget->addTab(widTranslate, icon(""), tr("Translate"));
    tabWidget->addTab(widRotate, icon(""), tr("Rotate"));
    tabWidget->addTab(widScale, icon(""), tr("Scale"));

    QVBoxLayout *layout = new QVBoxLayout();
    layout->addWidget(tabWidget);
    layout->addWidget(chkCopy);
    layout->addStretch();
    layout->addLayout(layoutButtonBox);

    setLayout(layout);
}
GuitarChordSelectorDialog::GuitarChordSelectorDialog(QWidget *parent)
    : QDialog(parent)
{
    QString localStyle = "QListView {background-color: #FFFFFF; alternate-background-color: #EEEEFF; color: #000000; selection-background-color: #80AFFF; selection-color: #FFFFFF;}";
    // we'll use "localStyle" as a future search point, but switch over to a
    // more meaningful variable name for the actual style assignment
    //
    // Note that I'm just slapping another local stylesheet on these damn
    // QListView objects, because they're stubbornly refusing to be touched from
    // the external stylesheet, and I'm beyond losing patience with dicking
    // around to solve problems like this.  Our stylesheet and style code are a
    // complete mess, and I will probably have to rewrite all of this one day,
    // but not before Thorn/Abraham Darby releases.
    QString listStyle = localStyle;

    setModal(true);
    setWindowTitle(tr("Guitar Chord Selector"));
    setWindowIcon(IconLoader().loadPixmap("window-guitar"));

    QGridLayout *metagrid = new QGridLayout;
    setLayout(metagrid);
    QGroupBox *page = new QGroupBox(this);
    QGridLayout *topLayout = new QGridLayout(page);
    metagrid->addWidget(page, 0, 0);
    
    topLayout->addWidget(new QLabel(tr("Root"), page), 0, 0);
    m_rootNotesList = new QListWidget(page);
    m_rootNotesList->setStyleSheet(listStyle);
    topLayout->addWidget(m_rootNotesList, 1, 0);
    
    topLayout->addWidget(new QLabel(tr("Extension"), page), 0, 1);
    m_chordExtList = new QListWidget(page);
    m_chordExtList->setStyleSheet(listStyle);
    topLayout->addWidget(m_chordExtList, 1, 1);
    
    m_newFingeringButton = new QPushButton(tr("New"), page);
    m_deleteFingeringButton = new QPushButton(tr("Delete"), page);
    m_editFingeringButton = new QPushButton(tr("Edit"), page);
    
    m_chordComplexityCombo = new QComboBox(page);
    m_chordComplexityCombo->addItem(tr("beginner"));
    m_chordComplexityCombo->addItem(tr("common"));
    m_chordComplexityCombo->addItem(tr("all"));
    //m_chordComplexityCombo->setMinimumContentsLength(20);
    
    connect(m_chordComplexityCombo, SIGNAL(activated(int)),
            this, SLOT(slotComplexityChanged(int)));

    page->setContentsMargins(5, 5, 5, 5);
    QVBoxLayout* vboxLayout = new QVBoxLayout();
    //topLayout->addLayout(vboxLayout, 1, 2, 3, 1);
    topLayout->addLayout(vboxLayout, 2, 1);
    vboxLayout->addWidget(m_chordComplexityCombo);
    vboxLayout->addStretch(10);
    vboxLayout->addWidget(m_newFingeringButton); 
    vboxLayout->addWidget(m_deleteFingeringButton); 
    vboxLayout->addWidget(m_editFingeringButton); 
    
    connect(m_newFingeringButton, SIGNAL(clicked()),
            this, SLOT(slotNewFingering()));
    connect(m_deleteFingeringButton, SIGNAL(clicked()),
            this, SLOT(slotDeleteFingering()));
    connect(m_editFingeringButton, SIGNAL(clicked()),
            this, SLOT(slotEditFingering()));
    
    topLayout->addWidget(new QLabel(tr("Fingerings"), page), 0, 3);
    m_fingeringsList = new QListWidget(page);
    m_fingeringsList->setStyleSheet(listStyle);

    // try setting size to something 200 can be divided into evenly, in the hope
    // of avoiding fuzzy half pixel scaling problems (50 was no good, but 100
    // works well for grid lines here; dots still look awful, but who cares)
    m_fingeringsList->setIconSize(QSize(100, 100));

    topLayout->addWidget(m_fingeringsList, 1, 3, 2, 1);
    
    m_fingeringBox = new FingeringBox(false, page, true);
    topLayout->addWidget(m_fingeringBox, 2, 0, 1, 2);
    
    connect(m_rootNotesList, SIGNAL(currentRowChanged(int)),
            this, SLOT(slotRootHighlighted(int)));
    connect(m_chordExtList, SIGNAL(currentRowChanged(int)),
            this, SLOT(slotChordExtHighlighted(int)));

    // connect itemClicked() so it will fire if a user clicks directly on the
    // fingering list doodad thingummy (and comments like "fingering list doodad
    // thingummy" are what you get when you abandon half-finished code the core
    // developers don't really understand, and expect them to keep it alive for
    // you in perpetuity)
    //
    connect(m_fingeringsList, SIGNAL(itemClicked(QListWidgetItem*)),
            this, SLOT(slotFingeringHighlighted(QListWidgetItem*)));

    // connect currentRowChanged() so this can be fired when other widgets are
    // manipulated, which will cause this one to pop back up to the top.  This
    // slot triggers other updates in a leg bone connected to the thigh bone
    // fashion, so we have to wire it to some input to get those updates to
    // happen, and overloading this to fire two different ways was quick and
    // cheap
    //
    connect(m_fingeringsList, SIGNAL(currentRowChanged(int)),
            this, SLOT(slotFingeringHighlighted(int)));

    QDialogButtonBox *buttonBox = new QDialogButtonBox(QDialogButtonBox::Ok |
                                                       QDialogButtonBox::Cancel);
    metagrid->addWidget(buttonBox, 1, 0);
    metagrid->setRowStretch(0, 10);
    connect(buttonBox, SIGNAL(accepted()), this, SLOT(accept()));
    connect(buttonBox, SIGNAL(rejected()), this, SLOT(reject()));
}
AdjustLevelsPopup::AdjustLevelsPopup()
	: DVGui::Dialog(TApp::instance()->getMainWindow(), true, false, "AdjustLevels"), m_thresholdD(0.005) //0.5% of the image size
{
	int i, j;

	setWindowTitle(tr("Adjust Levels"));
	setLabelWidth(0);
	setModal(false);

	setTopMargin(0);
	setTopSpacing(0);

	beginVLayout();

	QSplitter *splitter = new QSplitter(Qt::Vertical);
	splitter->setSizePolicy(QSizePolicy(QSizePolicy::MinimumExpanding, QSizePolicy::MinimumExpanding));
	addWidget(splitter);

	endVLayout();

	//------------------------- Top Layout --------------------------

	QScrollArea *scrollArea = new QScrollArea(splitter);
	scrollArea->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
	scrollArea->setWidgetResizable(true);
	scrollArea->setMinimumWidth(450);
	splitter->addWidget(scrollArea);
	splitter->setStretchFactor(0, 1);

	QFrame *topWidget = new QFrame(scrollArea);
	scrollArea->setWidget(topWidget);

	QVBoxLayout *topVLayout = new QVBoxLayout(topWidget); //Needed to justify at top
	topWidget->setLayout(topVLayout);

	QHBoxLayout *topLayout = new QHBoxLayout(topWidget);
	topVLayout->addLayout(topLayout);
	topVLayout->addStretch(1);

	//------------------------- Histogram ---------------------------

	m_histogram = new Histogram(topWidget);
	topLayout->addWidget(m_histogram);

	//------------------------- Mark Bars ---------------------------

	MarksBar *histogramMarksBar, *colorBarMarksBar;
	QVBoxLayout *histogramViewLayout;

	for (i = 0; i < 5; ++i) {
		HistogramView *view = m_histogram->getHistograms()->getHistogramView(i);
		histogramViewLayout = static_cast<QVBoxLayout *>(view->layout());

		//Don't draw channel numbers
		view->channelBar()->setDrawNumbers(false);

		for (j = 0; j < 2; ++j) {
			EditableMarksBar *editableMarksBar = m_marksBar[j + (i << 1)] = new EditableMarksBar;
			MarksBar *marksBar = editableMarksBar->marksBar();

			//Set margins up to cover the histogram
			editableMarksBar->layout()->setContentsMargins(6, 0, 5, 0);
			connect(editableMarksBar, SIGNAL(paramsChanged()), this, SLOT(onParamsChanged()));

			histogramViewLayout->insertWidget(1 + (j << 1), editableMarksBar);
		}
	}

	//------------------------- View Widget -------------------------

	//NOTE: It's IMPORTANT that parent widget is supplied. It's somewhat
	//used by QSplitter to decide the initial widget sizes...

	m_viewer = new Swatch(splitter);
	m_viewer->setMinimumHeight(150);
	m_viewer->setFocusPolicy(Qt::WheelFocus);
	splitter->addWidget(m_viewer);

	//--------------------------- Buttons ---------------------------

	QVBoxLayout *buttonsLayout = new QVBoxLayout(topWidget);
	topLayout->addLayout(buttonsLayout);

	buttonsLayout->addSpacing(50);

	QPushButton *clampRange = new QPushButton(tr("Clamp"), topWidget);
	clampRange->setMinimumSize(65, 25);
	buttonsLayout->addWidget(clampRange);
	connect(clampRange, SIGNAL(clicked(bool)), this, SLOT(clampRange()));

	QPushButton *autoAdjust = new QPushButton(tr("Auto"), topWidget);
	autoAdjust->setMinimumSize(65, 25);
	buttonsLayout->addWidget(autoAdjust);
	connect(autoAdjust, SIGNAL(clicked(bool)), this, SLOT(autoAdjust()));

	QPushButton *resetBtn = new QPushButton(tr("Reset"), topWidget);
	resetBtn->setMinimumSize(65, 25);
	buttonsLayout->addWidget(resetBtn);
	connect(resetBtn, SIGNAL(clicked(bool)), this, SLOT(reset()));

	buttonsLayout->addStretch(1);

	m_okBtn = new QPushButton(tr("Apply"));
	addButtonBarWidget(m_okBtn);

	connect(m_okBtn, SIGNAL(clicked()), this, SLOT(apply()));

	//Finally, acquire current selection
	acquireRaster();

	m_viewer->resize(0, 350);
	resize(600, 700);
}
示例#14
0
文件: toplevel.cpp 项目: maxxant/qt
KAstTopLevel::KAstTopLevel( QWidget *parent)
    : QMainWindow(parent)
{
    QWidget *border = new QWidget( this );

    QPalette palette;
    palette.setColor(border->backgroundRole(), Qt::black);
    border->setPalette(palette);

    setCentralWidget( border );

    QVBoxLayout *borderLayout = new QVBoxLayout( border );
    borderLayout->addStretch( 1 );

    QWidget *mainWin = new QWidget( border );
#if defined(Q_WS_MAEMO_5)
    mainWin->setFixedSize(800, 430);
#elif defined(Q_OS_SYMBIAN)
    mainWin->setFixedSize(640, 340);
#else
    mainWin->setFixedSize(640, 480);
#endif
    borderLayout->addWidget( mainWin, 0, Qt::AlignHCenter );

    borderLayout->addStretch( 1 );

    view = new KAsteroidsView( mainWin );
    view->setFocusPolicy( Qt::StrongFocus );
    connect( view, SIGNAL(shipKilled()), SLOT(slotShipKilled()) );
    connect( view, SIGNAL(rockHit(int)), SLOT(slotRockHit(int)) );
    connect( view, SIGNAL(rocksRemoved()), SLOT(slotRocksRemoved()) );
    connect( view, SIGNAL(updateVitals()), SLOT(slotUpdateVitals()) );

    QVBoxLayout *vb = new QVBoxLayout( mainWin );
    QHBoxLayout *hb = new QHBoxLayout;
    QHBoxLayout *hbd = new QHBoxLayout;
    vb->addLayout( hb );

#if defined(Q_OS_SYMBIAN)
    QFont labelFont( "helvetica", 8 );
#else
    QFont labelFont( "helvetica", 24 );
#endif

    QPalette pal(Qt::darkGreen, Qt::black, QColor( 128, 128, 128 ), QColor( 64, 64, 64 ), Qt::black, Qt::darkGreen, Qt::black);

    mainWin->setPalette( pal );

    hb->addSpacing( 10 );

    QLabel *label;
    label = new QLabel( tr("Score"), mainWin );
    label->setFont( labelFont );
    label->setPalette( pal );
    label->setFixedWidth( label->sizeHint().width() );
    hb->addWidget( label );

    scoreLCD = new QLCDNumber( 6, mainWin );
    scoreLCD->setFrameStyle( QFrame::NoFrame );
    scoreLCD->setSegmentStyle( QLCDNumber::Flat );
    scoreLCD->setFixedWidth( 150 );
    scoreLCD->setPalette( pal );
    hb->addWidget( scoreLCD );
    hb->addStretch( 10 );

    label = new QLabel( tr("Level"), mainWin );
    label->setFont( labelFont );
    label->setPalette( pal );
    label->setFixedWidth( label->sizeHint().width() );
    hb->addWidget( label );

    levelLCD = new QLCDNumber( 2, mainWin );
    levelLCD->setFrameStyle( QFrame::NoFrame );
    levelLCD->setSegmentStyle( QLCDNumber::Flat );
    levelLCD->setFixedWidth( 70 );
    levelLCD->setPalette( pal );
    hb->addWidget( levelLCD );
    hb->addStretch( 10 );

    label = new QLabel( tr("Ships"), mainWin );
    label->setFont( labelFont );
    label->setFixedWidth( label->sizeHint().width() );
    label->setPalette( pal );
    hb->addWidget( label );

    shipsLCD = new QLCDNumber( 1, mainWin );
    shipsLCD->setFrameStyle( QFrame::NoFrame );
    shipsLCD->setSegmentStyle( QLCDNumber::Flat );
    shipsLCD->setFixedWidth( 40 );
    shipsLCD->setPalette( pal );
    hb->addWidget( shipsLCD );

    hb->addStrut( 30 );

    vb->addWidget( view, 10 );

// -- bottom layout:
    vb->addLayout( hbd );

#if defined(Q_OS_SYMBIAN)
    QFont smallFont( "helvetica", 6 );
#else
    QFont smallFont( "helvetica", 14 );
#endif
    hbd->addSpacing( 10 );

    QString sprites_prefix = ":/trolltech/examples/graphicsview/portedasteroids/sprites/";
/*
    label = new QLabel( tr( "T" ), mainWin );
    label->setFont( smallFont );
    label->setFixedWidth( label->sizeHint().width() );
    label->setPalette( pal );
    hbd->addWidget( label );

    teleportsLCD = new QLCDNumber( 1, mainWin );
    teleportsLCD->setFrameStyle( QFrame::NoFrame );
    teleportsLCD->setSegmentStyle( QLCDNumber::Flat );
    teleportsLCD->setPalette( pal );
    teleportsLCD->setFixedHeight( 20 );
    hbd->addWidget( teleportsLCD );

    hbd->addSpacing( 10 );
*/
    QPixmap pm( sprites_prefix + "powerups/brake.png" );
    label = new QLabel( mainWin );
    label->setPixmap( pm );
    label->setFixedWidth( label->sizeHint().width() );
    label->setPalette( pal );
    hbd->addWidget( label );

    brakesLCD = new QLCDNumber( 1, mainWin );
    brakesLCD->setFrameStyle( QFrame::NoFrame );
    brakesLCD->setSegmentStyle( QLCDNumber::Flat );
    brakesLCD->setPalette( pal );
    brakesLCD->setFixedHeight( 20 );
    hbd->addWidget( brakesLCD );

    hbd->addSpacing( 10 );

    pm.load( sprites_prefix + "powerups/shield.png" );
    label = new QLabel( mainWin );
    label->setPixmap( pm );
    label->setFixedWidth( label->sizeHint().width() );
    label->setPalette( pal );
    hbd->addWidget( label );

    shieldLCD = new QLCDNumber( 1, mainWin );
    shieldLCD->setFrameStyle( QFrame::NoFrame );
    shieldLCD->setSegmentStyle( QLCDNumber::Flat );
    shieldLCD->setPalette( pal );
    shieldLCD->setFixedHeight( 20 );
    hbd->addWidget( shieldLCD );

    hbd->addSpacing( 10 );

    pm.load( sprites_prefix + "powerups/shoot.png" );
    label = new QLabel( mainWin );
    label->setPixmap( pm );
    label->setFixedWidth( label->sizeHint().width() );
    label->setPalette( pal );
    hbd->addWidget( label );

    shootLCD = new QLCDNumber( 1, mainWin );
    shootLCD->setFrameStyle( QFrame::NoFrame );
    shootLCD->setSegmentStyle( QLCDNumber::Flat );
    shootLCD->setPalette( pal );
    shootLCD->setFixedHeight( 20 );
    hbd->addWidget( shootLCD );

    hbd->addStretch( 1 );

    label = new QLabel( tr( "Fuel" ), mainWin );
    label->setFont( smallFont );
    label->setFixedWidth( label->sizeHint().width() + 10 );
    label->setPalette( pal );
    hbd->addWidget( label );

    powerMeter = new KALedMeter( mainWin );
    powerMeter->setFrameStyle( QFrame::Box | QFrame::Plain );
    powerMeter->setRange( MAX_POWER_LEVEL );
    powerMeter->addColorRange( 10, Qt::darkRed );
    powerMeter->addColorRange( 20, QColor(160, 96, 0) );
    powerMeter->addColorRange( 70, Qt::darkGreen );
    powerMeter->setCount( 40 );
    powerMeter->setPalette( pal );
    powerMeter->setFixedSize( 200, 12 );
    hbd->addWidget( powerMeter );

    shipsRemain = 3;
    showHiscores = FALSE;

    actions.insert( Qt::Key_Up, Thrust );
    actions.insert( Qt::Key_Left, RotateLeft );
    actions.insert( Qt::Key_Right, RotateRight );
    actions.insert( Qt::Key_Space, Shoot );
    actions.insert( Qt::Key_Z, Teleport );
    actions.insert( Qt::Key_X, Brake );
    actions.insert( Qt::Key_S, Shield );
    actions.insert( Qt::Key_P, Pause );
    actions.insert( Qt::Key_L, Launch );
    actions.insert( Qt::Key_N, NewGame );

#if defined(Q_OS_SYMBIAN)
    actions.insert( 122, Teleport );
    actions.insert( 120, Brake );
    actions.insert( 115, Shield );
    actions.insert( 112, Pause );
    actions.insert( 108, Launch );
    actions.insert( 110, NewGame );
#endif

    view->showText( tr( "Press N to start playing" ), Qt::yellow );
}
示例#15
0
void GUI::initialize() 
{
	readFeatureList();
	KeyWordSearch::getInstance().initialize();
	QGroupBox * input = new QGroupBox("Input");
	QHBoxLayout * inputArea = new QHBoxLayout();
	int width = this->width();
	int height = this->height();
	auto inputTextEdit =  createLineEdit("input", { 0.03f*width ,0.05f* height }, { 200,15 });
	inputTextEdit->setParent(this);
	auto recommnedButton = createButton("RecommendButton", "Find", { 0.5f * width, 0.05* height }, { 50,20 });
	recommnedButton->setParent(this);

	inputArea->addWidget(inputTextEdit);
	inputArea->addWidget(recommnedButton);
	inputArea->addStretch(1);
	input->setLayout(inputArea);

	QGroupBox * output = new QGroupBox("Output");
	 outputButtons = new QGroupBox("Output");
	QHBoxLayout * outputArea = new QHBoxLayout();
	//auto outputTextEdit = createLineEdit("output", { 0.03f*width ,0.05f* height }, { 500,500 });
	auto outputTextEdit = createTextDisplay("OutputText", { 0,0 }, { 300,500 }, false);
	auto recommendeOutTextEdit = createTextDisplay("RecommendedOutputText", { 0,0 }, { 300,500 }, false);
	recommendeOutTextEdit->setParent(this);
	outputTextEdit->setParent(this);
	outputArea->addWidget(outputTextEdit);
	outputArea->addWidget(recommendeOutTextEdit);

	
	QVBoxLayout * outputButtonArea = new QVBoxLayout();
	auto itr = featureList.begin();
	auto itrEnd = featureList.end();
	while (itr != itrEnd)
	{
		auto label = new QLabel((itr->first).c_str());
		label->setParent(this);
		outputButtonArea->addWidget(label);
		auto itrVector = itr->second.begin();
		auto itrVectorEnd = itr->second.end();
		while (itrVector != itrVectorEnd)
		{
			auto button1 = createCheckBox(*itrVector, *itrVector, { 0,0 }, false);
			button1->setParent(this);
			outputButtonArea->addWidget(button1);
			++itrVector;
		}

		++itr;
	}
	auto button2 = createButton("FilterSearch", "Search");
	outputButtonArea->addWidget(button2);
	outputButtonArea->addStretch(1);
	outputButtons->setLayout(outputButtonArea);
	outputArea->addWidget(outputButtons);
	outputButtons->setVisible(false);

	output->setLayout(outputArea);
	outputArea->addStretch(1);
	mainLayout->addWidget(input);
	mainLayout->addWidget(output);
	mainLayout->addStretch(1);

	connectToTask();
}
示例#16
0
QWidget *ConfigDialog::createViewWidget()
{
    logMessage("ConfigDialog::createViewWidget()");

    // geometry
    txtGeometryNodeSize = new SLineEditDouble();
    // txtGeometryNodeSize->setMaximumWidth(60);
    txtGeometryEdgeWidth = new SLineEditDouble();
    // txtGeometryEdgeWidth->setMaximumWidth(60);
    txtGeometryLabelSize = new SLineEditDouble();
    // txtGeometryLabelSize->setMaximumWidth(60);

    QGridLayout *layoutGeometry = new QGridLayout();
    layoutGeometry->addWidget(new QLabel(tr("Node size:")), 0, 0);
    layoutGeometry->addWidget(txtGeometryNodeSize, 0, 1);
    layoutGeometry->addWidget(new QLabel(tr("Edge width:")), 1, 0);
    layoutGeometry->addWidget(txtGeometryEdgeWidth, 1, 1);
    layoutGeometry->addWidget(new QLabel(tr("Label size:")), 2, 0);
    layoutGeometry->addWidget(txtGeometryLabelSize, 2, 1);

    QGroupBox *grpGeometry = new QGroupBox(tr("Geometry"));
    grpGeometry->setLayout(layoutGeometry);

    // others;
    chkZoomToMouse = new QCheckBox(tr("Zoom to mouse pointer"));

    QVBoxLayout *layoutOther = new QVBoxLayout();
    layoutOther->addWidget(chkZoomToMouse);

    QGroupBox *grpOther = new QGroupBox(tr("Other"));
    grpOther->setLayout(layoutOther);

    // layout general
    QVBoxLayout *layoutGeneral = new QVBoxLayout();
    layoutGeneral->addWidget(grpGeometry);
    layoutGeneral->addWidget(grpOther);
    layoutGeneral->addStretch();

    QWidget *widgetGeneral = new QWidget(this);
    widgetGeneral->setLayout(layoutGeneral);

    // scalar view log scale
    chkScalarFieldRangeLog = new QCheckBox(tr("Log. scale"));
    txtScalarFieldRangeBase = new QLineEdit("10");
    connect(chkScalarFieldRangeLog, SIGNAL(stateChanged(int)), this, SLOT(doScalarFieldLog(int)));

    txtScalarDecimalPlace = new QSpinBox(this);
    txtScalarDecimalPlace->setMinimum(1);
    txtScalarDecimalPlace->setMaximum(10);

    QGridLayout *layoutScalarField = new QGridLayout();
    layoutScalarField->addWidget(new QLabel(tr("Base:")), 0, 0);
    layoutScalarField->addWidget(txtScalarFieldRangeBase, 0, 1);
    layoutScalarField->addWidget(chkScalarFieldRangeLog, 0, 2);
    layoutScalarField->addWidget(new QLabel(tr("Decimal places:")), 1, 0);
    layoutScalarField->addWidget(txtScalarDecimalPlace, 1, 1);

    QGroupBox *grpScalarField = new QGroupBox(tr("Scalar view"));
    grpScalarField->setLayout(layoutScalarField);

    // layout 3d
    chkView3DLighting = new QCheckBox(tr("Ligthing"), this);
    txtView3DAngle = new QDoubleSpinBox(this);
    txtView3DAngle->setDecimals(1);
    txtView3DAngle->setSingleStep(1);
    txtView3DAngle->setMinimum(30);
    txtView3DAngle->setMaximum(360);
    chkView3DBackground = new QCheckBox(tr("Gradient background"), this);
    txtView3DHeight = new QDoubleSpinBox(this);
    txtView3DHeight->setDecimals(1);
    txtView3DHeight->setSingleStep(0.1);
    txtView3DHeight->setMinimum(0.2);
    txtView3DHeight->setMaximum(10.0);

    QGridLayout *layout3D = new QGridLayout();
    layout3D->addWidget(new QLabel(tr("Angle:")), 0, 1);
    layout3D->addWidget(txtView3DAngle, 0, 2);
    layout3D->addWidget(chkView3DLighting, 0, 3);
    layout3D->addWidget(new QLabel(tr("Height:")), 1, 1);
    layout3D->addWidget(txtView3DHeight, 1, 2);
    layout3D->addWidget(chkView3DBackground, 1, 3);

    QGroupBox *grp3D = new QGroupBox(tr("3D"));
    grp3D->setLayout(layout3D);

    // layout deform shape
    chkDeformScalar = new QCheckBox(tr("Scalar field"), this);
    chkDeformContour = new QCheckBox(tr("Contours"), this);
    chkDeformVector = new QCheckBox(tr("Vector field"), this);

    QGridLayout *layoutDeformShape = new QGridLayout();
    layoutDeformShape->addWidget(chkDeformScalar, 0, 0);
    layoutDeformShape->addWidget(chkDeformContour, 0, 1);
    layoutDeformShape->addWidget(chkDeformVector, 0, 2);

    QGroupBox *grpDeformShape = new QGroupBox(tr("Deform shape"));
    grpDeformShape->setLayout(layoutDeformShape);

    // layout postprocessor
    QVBoxLayout *layoutPostprocessor = new QVBoxLayout();
    layoutPostprocessor->addWidget(grpScalarField);
    layoutPostprocessor->addWidget(grp3D);
    layoutPostprocessor->addWidget(grpDeformShape);
    layoutPostprocessor->addStretch();

    QWidget *widgetPostprocessor = new QWidget(this);
    widgetPostprocessor->setLayout(layoutPostprocessor);

    QTabWidget *tabType = new QTabWidget(this);
    tabType->addTab(widgetGeneral, icon(""), tr("General"));
    tabType->addTab(widgetPostprocessor, icon(""), tr("Postprocessor"));

    return tabType;
}
示例#17
0
void GL3DScales::SetupLayout()
{
	QSizePolicy szPolicyMinimum;
	szPolicyMinimum.setHorizontalPolicy(QSizePolicy::Minimum);
	szPolicyMinimum.setVerticalPolicy(QSizePolicy::Minimum);

	setSizePolicy(szPolicyMinimum);

	QSizePolicy szPolicyExpanding;
	szPolicyExpanding.setHorizontalPolicy(QSizePolicy::Expanding);
	szPolicyExpanding.setVerticalPolicy(QSizePolicy::Expanding);

	QGroupBox *CpScaleBox = new QGroupBox(tr("Cp Scale"));
	{
		QGridLayout *CpScaleLayout = new QGridLayout;
		m_pctrlAutoCpScale = new QCheckBox(tr("Auto Scales"));
		m_pctrlLegendMin = new FloatEdit(61.234);
		m_pctrlLegendMax = new FloatEdit(3.5555);
		m_pctrlLegendMin->SetPrecision(2);
		m_pctrlLegendMax->SetPrecision(2);
		QLabel *lab0 = new QLabel(tr("Min"));
		QLabel *lab1 = new QLabel(tr("Max"));
		lab0->setAlignment(Qt::AlignVCenter |Qt::AlignRight);
		lab1->setAlignment(Qt::AlignVCenter |Qt::AlignRight);
		CpScaleLayout->addWidget(m_pctrlAutoCpScale,1,2);
		CpScaleLayout->addWidget(lab0,2,1);
		CpScaleLayout->addWidget(m_pctrlLegendMin,2,2);
		CpScaleLayout->addWidget(lab1,3,1);
		CpScaleLayout->addWidget(m_pctrlLegendMax,3,2);
		CpScaleBox->setLayout(CpScaleLayout);
	}

//_______________________3D Scales

	QGroupBox *ScaleBox = new QGroupBox(tr("Vector Scales"));
	{
		QVBoxLayout *SliderLayout = new QVBoxLayout;
		m_pctrlLiftScaleSlider  = new QSlider(Qt::Horizontal);
		m_pctrlLiftScaleSlider->setMinimum(0);
		m_pctrlLiftScaleSlider->setMaximum(100);
		m_pctrlLiftScaleSlider->setSliderPosition(50);
		m_pctrlLiftScaleSlider->setTickInterval(5);
		m_pctrlLiftScaleSlider->setTickPosition(QSlider::TicksBelow);
		m_pctrlDragScaleSlider = new QSlider(Qt::Horizontal);
		m_pctrlDragScaleSlider->setMinimum(0);
		m_pctrlDragScaleSlider->setMaximum(100);
		m_pctrlDragScaleSlider->setSliderPosition(50);
		m_pctrlDragScaleSlider->setTickInterval(5);
		m_pctrlDragScaleSlider->setTickPosition(QSlider::TicksBelow);
		m_pctrlVelocityScaleSlider  = new QSlider(Qt::Horizontal);
		m_pctrlVelocityScaleSlider->setMinimum(0);
		m_pctrlVelocityScaleSlider->setMaximum(100);
		m_pctrlVelocityScaleSlider->setSliderPosition(50);
		m_pctrlVelocityScaleSlider->setTickInterval(5);
		m_pctrlVelocityScaleSlider->setTickPosition(QSlider::TicksBelow);
		SliderLayout->addWidget(m_pctrlLiftScaleSlider);
		SliderLayout->addWidget(m_pctrlDragScaleSlider);
		SliderLayout->addWidget(m_pctrlVelocityScaleSlider);

		QVBoxLayout *LabelLayout = new QVBoxLayout;
		QLabel *lab2 = new QLabel(tr("Lift "));
		QLabel *lab3 = new QLabel(tr("Drag "));
		QLabel *lab4 = new QLabel(tr("Velocity "));
		LabelLayout->addWidget(lab2);
		LabelLayout->addWidget(lab3);
		LabelLayout->addWidget(lab4);

		QHBoxLayout *ScaleLayout = new QHBoxLayout;
		ScaleLayout->addLayout(LabelLayout);
		ScaleLayout->addLayout(SliderLayout);
		ScaleBox->setLayout(ScaleLayout);
	}

//__________________________________	Streamlines

	QGroupBox *LengthBox = new QGroupBox(tr("Streamline length"));
	{
		m_pctrlNXPoint = new FloatEdit(33,0);
		m_pctrlNXPoint->SetPrecision(0);
		m_pctrlDeltaL = new FloatEdit(12.34,2);
		m_pctrlXFactor       = new FloatEdit(1.23,2);
		m_pctrlLengthUnit1 = new QLabel("miles");
		QLabel *lab5 = new QLabel(tr("X-axis points"));
		QLabel *lab6 = new QLabel(tr("1st segment"));
		QLabel *lab7 = new QLabel(tr("X factor"));
		lab5->setAlignment(Qt::AlignVCenter |Qt::AlignRight);
		lab6->setAlignment(Qt::AlignVCenter |Qt::AlignRight);
		lab7->setAlignment(Qt::AlignVCenter |Qt::AlignRight);
		QGridLayout *LengthLayout = new QGridLayout;
		LengthLayout->addWidget(lab5, 1, 1);
		LengthLayout->addWidget(m_pctrlNXPoint , 1, 2);
		LengthLayout->addWidget(lab6, 2, 1);
		LengthLayout->addWidget(m_pctrlDeltaL, 2, 2);
		LengthLayout->addWidget(m_pctrlLengthUnit1, 2, 3);
		LengthLayout->addWidget(lab7, 3, 1);
		LengthLayout->addWidget(m_pctrlXFactor, 3, 2);
		LengthBox->setLayout(LengthLayout);
	}

	QGroupBox *StartBox = new QGroupBox(tr("Start Streamline at"));
	{
		QHBoxLayout *LineLayout = new QHBoxLayout;
		{
			m_pctrlLE = new QRadioButton(tr("L.E."));
			m_pctrlTE = new QRadioButton(tr("T.E."));
			m_pctrlYLine = new QRadioButton(tr("Y-Line"));
			m_pctrlZLine = new QRadioButton(tr("Z-Line"));
			LineLayout->addWidget(m_pctrlLE);
			LineLayout->addWidget(m_pctrlTE);
			LineLayout->addWidget(m_pctrlYLine);
			LineLayout->addWidget(m_pctrlZLine);
		}
		QGridLayout *OffsetLayout = new QGridLayout;
		{
			m_pctrlXOffset       = new FloatEdit(3.21,3);
			m_pctrlYOffset       = new FloatEdit(4.56,3);
			m_pctrlZOffset       = new FloatEdit(7.89,3);
			m_pctrlLengthUnit2 = new QLabel("km");
			m_pctrlLengthUnit3 = new QLabel("m");
			m_pctrlLengthUnit4 = new QLabel("light-year");
			m_pctrlLengthUnit5 = new QLabel("nanometer");
			QLabel *lab8  = new QLabel(tr("X-Offset"));
			QLabel *lab9  = new QLabel(tr("Y-Offset"));
			QLabel *lab10 = new QLabel(tr("Z-Offset"));
			lab8->setAlignment(Qt::AlignVCenter |Qt::AlignRight);
			lab9->setAlignment(Qt::AlignVCenter |Qt::AlignRight);
			lab10->setAlignment(Qt::AlignVCenter |Qt::AlignRight);

			m_pctrlNStreamLines = new FloatEdit(29, 0);
			m_pctrlStreamLineSpacing = new FloatEdit(.3, 2);
			QLabel *lab11 = new QLabel(tr("N Streamlines ="));
			QLabel *lab12 = new QLabel(tr("Spacing ="));
			lab11->setAlignment(Qt::AlignVCenter |Qt::AlignRight);
			lab12->setAlignment(Qt::AlignVCenter |Qt::AlignRight);

			OffsetLayout->addWidget(lab8,1,1);
			OffsetLayout->addWidget(m_pctrlXOffset,1,2);
			OffsetLayout->addWidget(m_pctrlLengthUnit2,1,3);
			OffsetLayout->addWidget(lab9,2,1);
			OffsetLayout->addWidget(m_pctrlYOffset,2,2);
			OffsetLayout->addWidget(m_pctrlLengthUnit3,2,3);
			OffsetLayout->addWidget(lab10,3,1);
			OffsetLayout->addWidget(m_pctrlZOffset,3,2);
			OffsetLayout->addWidget(m_pctrlLengthUnit4,3,3);
			OffsetLayout->addWidget(lab11,4,1);
			OffsetLayout->addWidget(m_pctrlNStreamLines,4,2);
			OffsetLayout->addWidget(lab12,5,1);
			OffsetLayout->addWidget(m_pctrlStreamLineSpacing,5,2);
			OffsetLayout->addWidget(m_pctrlLengthUnit5,5,3);
		}
		QVBoxLayout *StartLayout = new QVBoxLayout;
		{
			StartLayout->addLayout(LineLayout);
			StartLayout->addLayout(OffsetLayout);
			StartBox->setLayout(StartLayout);
		}
	}

	QGroupBox *StreamBox = new QGroupBox(tr("Streamlines"));
	{
		ApplyButton = new QPushButton(tr("Apply"));
		QVBoxLayout *StreamLayout = new QVBoxLayout;
		StreamLayout->addWidget(LengthBox);
		StreamLayout->addWidget(StartBox);
		StreamLayout->addStretch(1);
		StreamLayout->addWidget(ApplyButton);
		StreamLayout->addStretch(1);
		StreamBox->setLayout(StreamLayout);
	}


	QVBoxLayout *MainLayout = new QVBoxLayout;
	MainLayout->addStretch(1);
	MainLayout->addWidget(ScaleBox);
	MainLayout->addSpacing(15);
	MainLayout->addStretch(1);
	MainLayout->addWidget(CpScaleBox);
	MainLayout->addSpacing(15);
	MainLayout->addStretch(1);
	MainLayout->addWidget(StreamBox);
	MainLayout->addStretch(1);

	setLayout(MainLayout);
}
示例#18
0
QWidget *ConfigDialog::createSolverWidget()
{
    logMessage("ConfigDialog::createSolverWidget()");

    // general
    chkDeleteTriangleMeshFiles = new QCheckBox(tr("Delete files with initial mesh (Triangle)"));
    chkDeleteHermes2DMeshFile = new QCheckBox(tr("Delete files with solution mesh (Hermes2D)"));
    if (Util::config()->showExperimentalFeatures)
        chkSaveWithSolution = new QCheckBox(tr("Save problem with solution"));
    chkShowConvergenceChart = new QCheckBox(tr("Show convergence chart after solving"));

    QVBoxLayout *layoutSolver = new QVBoxLayout();
    layoutSolver->addWidget(chkDeleteTriangleMeshFiles);
    layoutSolver->addWidget(chkDeleteHermes2DMeshFile);
    if (Util::config()->showExperimentalFeatures)
        layoutSolver->addWidget(chkSaveWithSolution);
    layoutSolver->addWidget(chkShowConvergenceChart);

    QGroupBox *grpSolver = new QGroupBox(tr("Solver"));
    grpSolver->setLayout(layoutSolver);

    txtMeshAngleSegmentsCount = new QSpinBox(this);
    txtMeshAngleSegmentsCount->setMinimum(2);
    txtMeshAngleSegmentsCount->setMaximum(20);
    chkMeshCurvilinearElements = new QCheckBox(tr("Curvilinear elements"));

    QGridLayout *layoutMesh = new QGridLayout();
    layoutMesh->addWidget(new QLabel(tr("Angle segments count:")), 0, 0);
    layoutMesh->addWidget(txtMeshAngleSegmentsCount, 0, 1);
    layoutMesh->addWidget(chkMeshCurvilinearElements, 1, 0, 1, 2);

    QGroupBox *grpMesh = new QGroupBox(tr("Mesh"));
    grpMesh->setLayout(layoutMesh);

    QVBoxLayout *layoutGeneral = new QVBoxLayout();
    layoutGeneral->addWidget(grpSolver);
    layoutGeneral->addWidget(grpMesh);
    layoutGeneral->addStretch();

    QWidget *solverGeneralWidget = new QWidget(this);
    solverGeneralWidget->setLayout(layoutGeneral);

    // adaptivity
    lblMaxDofs = new QLabel(tr("Maximum number of DOFs:"));
    txtMaxDOFs = new QSpinBox(this);
    txtMaxDOFs->setMinimum(1e2);
    txtMaxDOFs->setMaximum(1e9);
    txtMaxDOFs->setSingleStep(1e2);
    /*
    chkIsoOnly = new QCheckBox(tr("Isotropic refinement"));
    lblIsoOnly = new QLabel(tr("<table>"
                               "<tr><td><b>true</b></td><td>isotropic refinement</td></tr>"
                               "<tr><td><b>false</b></td><td>anisotropic refinement</td></tr>"
                               "</table>"));
    */
    txtConvExp = new SLineEditDouble();
    lblConvExp = new QLabel(tr("<b></b>default value is 1.0, this parameter influences<br/>the selection of candidates in hp-adaptivity"));
    txtThreshold = new SLineEditDouble();
    lblThreshold = new QLabel(tr("<b></b>quantitative parameter of the adapt(...) function<br/>with different meanings for various adaptive strategies"));
    cmbStrategy = new QComboBox();
    cmbStrategy->addItem(tr("0"), 0);
    cmbStrategy->addItem(tr("1"), 1);
    cmbStrategy->addItem(tr("2"), 2);
    lblStrategy = new QLabel(tr("<table>"
                                 "<tr><td><b>0</b></td><td>refine elements until sqrt(<b>threshold</b>)<br/>times total error is processed.<br/>If more elements have similar errors,<br/>refine all to keep the mesh symmetric</td></tr>"
                                 "<tr><td><b>1</b></td><td>refine all elements<br/>whose error is larger than <b>threshold</b><br/>times maximum element error</td></tr>"
                                 "<tr><td><b>2</b></td><td>refine all elements<br/>whose error is larger than <b>threshold</b></td></tr>"
                                 "</table>"));
    cmbMeshRegularity = new QComboBox();
    cmbMeshRegularity->addItem(tr("arbitrary level hang. nodes"), -1);
    cmbMeshRegularity->addItem(tr("at most one-level hang. nodes"), 1);
    cmbMeshRegularity->addItem(tr("at most two-level hang. nodes"), 2);
    cmbMeshRegularity->addItem(tr("at most three-level hang. nodes"), 3);
    cmbMeshRegularity->addItem(tr("at most four-level hang. nodes"), 4);
    cmbMeshRegularity->addItem(tr("at most five-level hang. nodes"), 5);

    cmbProjNormType = new QComboBox();
    cmbProjNormType->addItem(errorNormString(HERMES_H1_NORM), HERMES_H1_NORM);
    cmbProjNormType->addItem(errorNormString(HERMES_L2_NORM), HERMES_L2_NORM);
    cmbProjNormType->addItem(errorNormString(HERMES_H1_SEMINORM), HERMES_H1_SEMINORM);

    // default
    QPushButton *btnAdaptivityDefault = new QPushButton(tr("Default"));
    connect(btnAdaptivityDefault, SIGNAL(clicked()), this, SLOT(doAdaptivityDefault()));

    QGridLayout *layoutAdaptivitySettings = new QGridLayout();
    layoutAdaptivitySettings->addWidget(lblMaxDofs, 0, 0);
    layoutAdaptivitySettings->addWidget(txtMaxDOFs, 0, 1, 1, 2);
    layoutAdaptivitySettings->addWidget(new QLabel(tr("Conv. exp.:")), 2, 0);
    layoutAdaptivitySettings->addWidget(txtConvExp, 2, 1);
    layoutAdaptivitySettings->addWidget(lblConvExp, 3, 0, 1, 2);
    layoutAdaptivitySettings->addWidget(new QLabel(tr("Strategy:")), 4, 0);
    layoutAdaptivitySettings->addWidget(cmbStrategy, 4, 1);
    layoutAdaptivitySettings->addWidget(lblStrategy, 5, 0, 1, 2);
    layoutAdaptivitySettings->addWidget(new QLabel(tr("Threshold:")), 6, 0);
    layoutAdaptivitySettings->addWidget(txtThreshold, 6, 1);
    layoutAdaptivitySettings->addWidget(lblThreshold, 7, 0, 1, 2);
    layoutAdaptivitySettings->addWidget(new QLabel(tr("Mesh regularity:")), 8, 0);
    layoutAdaptivitySettings->addWidget(cmbMeshRegularity, 8, 1);
    layoutAdaptivitySettings->addWidget(new QLabel(tr("Norm:")), 9, 0);
    layoutAdaptivitySettings->addWidget(cmbProjNormType, 9, 1);

    QVBoxLayout *layoutAdaptivity = new QVBoxLayout();
    layoutAdaptivity->addLayout(layoutAdaptivitySettings);
    layoutAdaptivity->addStretch();
    layoutAdaptivity->addWidget(btnAdaptivityDefault, 0, Qt::AlignLeft);

    QWidget *solverAdaptivityWidget = new QWidget(this);
    solverAdaptivityWidget->setLayout(layoutAdaptivity);

    // commands
    txtArgumentTriangle = new QLineEdit("");
    txtArgumentFFmpeg = new QLineEdit("");

    // default
    QPushButton *btnCommandsDefault = new QPushButton(tr("Default"));
    connect(btnCommandsDefault, SIGNAL(clicked()), this, SLOT(doCommandsDefault()));

    QVBoxLayout *layoutCommands = new QVBoxLayout();
    layoutCommands->addWidget(new QLabel(tr("Triangle")));
    layoutCommands->addWidget(txtArgumentTriangle);
    layoutCommands->addWidget(new QLabel(tr("FFmpeg")));
    layoutCommands->addWidget(txtArgumentFFmpeg);
    layoutCommands->addStretch();
    layoutCommands->addWidget(btnCommandsDefault, 0, Qt::AlignLeft);

    QWidget *solverCommandsWidget = new QWidget(this);
    solverCommandsWidget->setLayout(layoutCommands);

    QTabWidget *solverWidget = new QTabWidget(this);
    solverWidget->addTab(solverGeneralWidget, icon(""), tr("General"));
    solverWidget->addTab(solverAdaptivityWidget, icon(""), tr("Adaptivity"));
    solverWidget->addTab(solverCommandsWidget, icon(""), tr("Commands"));

    return solverWidget;
}
示例#19
0
Transform3DWidget::Transform3DWidget(QWidget* parent) :
    BaseWidget(parent, "Transform3DWidget", "Transform 3D")
{
	this->setToolTip("Display and manipulate an affine (rotation+translation) matrix");
  recursive = false;
  mBlockChanges = false;
  //layout
  QVBoxLayout* toptopLayout = new QVBoxLayout(this);
  toptopLayout->setMargin(4);
  QHBoxLayout* mLayout = new QHBoxLayout;
  mLayout->setMargin(0);
  toptopLayout->addLayout(mLayout);

  mTextEdit = new MatrixTextEdit;
  mTextEdit->setSizePolicy(QSizePolicy::MinimumExpanding,QSizePolicy::Maximum);
  mTextEdit->setLineWrapMode(QTextEdit::NoWrap);
  mTextEdit->setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
  mTextEdit->setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
  connect(mTextEdit, SIGNAL(textChanged()), this, SLOT(textEditChangedSlot()));

  mLayout->addWidget(mTextEdit, 1);

  QVBoxLayout* buttonLayout = new QVBoxLayout;
  mLayout->addLayout(buttonLayout);
  buttonLayout->setMargin(0);

  mEditAction = this->createAction(this,
      QIcon(":/icons/open_icon_library/system-run-5.png"),
      "Edit",
      "Toggle Edit Matrix",
      SLOT(toggleEditSlot()),
	  buttonLayout);
  mEditAction->setCheckable(true);

  mInvertAction = this->createAction(this,
	  QIcon(":/icons/matrix_inverse.png"),
	  "Invert",
	  "Toggle Invert Matrix",
	  SLOT(toggleInvertSlot()),
	  buttonLayout);
  mInvertAction->setCheckable(true);
  mInvertAction->setChecked(false);
  this->updateInvertAction();

//  mLayout->addStretch();

  aGroupBox = new QFrame(this);
  QVBoxLayout* aLayout = new QVBoxLayout;
  aGroupBox->setLayout(aLayout);
  aGroupBox->setFrameStyle(QFrame::StyledPanel | QFrame::Sunken);
  aGroupBox->setLineWidth(3);
  aLayout->setMargin(4);
  toptopLayout->addWidget(aGroupBox);

  this->addAngleControls("xAngle", "X Angle", 0, aLayout);
  this->addAngleControls("yAngle", "Y Angle", 1, aLayout);
  this->addAngleControls("zAngle", "Z Angle", 2, aLayout);

  tGroupBox = new QFrame(this);
  QVBoxLayout* tLayout = new QVBoxLayout;
  tGroupBox->setLayout(tLayout);
  tGroupBox->setFrameStyle(QFrame::StyledPanel | QFrame::Sunken);
  tGroupBox->setLineWidth(3);
  tLayout->setMargin(4);
  toptopLayout->addWidget(tGroupBox);

  this->addTranslationControls("xTranslation", "X", 0, tLayout);
  this->addTranslationControls("yTranslation", "Y", 1, tLayout);
  this->addTranslationControls("zTranslation", "Z", 2, tLayout);

  this->setMatrixInternal(Transform3D::Identity());

  toptopLayout->addStretch();

  this->setEditable(false);
}
示例#20
0
QWidget *ConfigDialog::createColorsWidget()
{
    logMessage("ConfigDialog::createColorsWidget()");

    QWidget *colorsWidget = new QWidget(this);

    // colors
    colorBackground = new ColorButton(this);
    colorGrid = new ColorButton(this);
    colorCross = new ColorButton(this);

    colorNodes = new ColorButton(this);
    colorEdges = new ColorButton(this);
    colorLabels = new ColorButton(this);
    colorContours = new ColorButton(this);
    colorVectors = new ColorButton(this);
    colorInitialMesh = new ColorButton(this);
    colorSolutionMesh = new ColorButton(this);

    colorHighlighted = new ColorButton(this);
    colorSelected = new ColorButton(this);

    QGridLayout *layoutColors = new QGridLayout();
    layoutColors->addWidget(new QLabel(tr("Background:")), 0, 0);
    layoutColors->addWidget(new QLabel(tr("Grid:")), 1, 0);
    layoutColors->addWidget(new QLabel(tr("Cross:")), 2, 0);
    layoutColors->addWidget(new QLabel(tr("Nodes:")), 3, 0);
    layoutColors->addWidget(new QLabel(tr("Edges:")), 4, 0);
    layoutColors->addWidget(new QLabel(tr("Labels:")), 5, 0);
    layoutColors->addWidget(new QLabel(tr("Contours:")), 6, 0);
    layoutColors->addWidget(new QLabel(tr("Vectors:")), 7, 0);
    layoutColors->addWidget(new QLabel(tr("Initial mesh:")), 8, 0);
    layoutColors->addWidget(new QLabel(tr("Solution mesh:")), 9, 0);
    layoutColors->addWidget(new QLabel(tr("Highlighted elements:")), 10, 0);
    layoutColors->addWidget(new QLabel(tr("Selected elements:")), 11, 0);

    layoutColors->addWidget(colorBackground, 0, 1);
    layoutColors->addWidget(colorGrid, 1, 1);
    layoutColors->addWidget(colorCross, 2, 1);
    layoutColors->addWidget(colorNodes, 3, 1);
    layoutColors->addWidget(colorEdges, 4, 1);
    layoutColors->addWidget(colorLabels, 5, 1);
    layoutColors->addWidget(colorContours, 6, 1);
    layoutColors->addWidget(colorVectors, 7, 1);
    layoutColors->addWidget(colorInitialMesh, 8, 1);
    layoutColors->addWidget(colorSolutionMesh, 9, 1);
    layoutColors->addWidget(colorHighlighted, 10, 1);
    layoutColors->addWidget(colorSelected, 11, 1);

    // default
    QPushButton *btnDefault = new QPushButton(tr("Default"));
    connect(btnDefault, SIGNAL(clicked()), this, SLOT(doColorsDefault()));

    QGroupBox *grpColor = new QGroupBox(tr("Colors"));
    grpColor->setLayout(layoutColors);

    QVBoxLayout *layout = new QVBoxLayout();
    layout->addWidget(grpColor);
    layout->addStretch();
    layout->addWidget(btnDefault, 0, Qt::AlignLeft);

    colorsWidget->setLayout(layout);

    return colorsWidget;
}
示例#21
0
文件: gradients.cpp 项目: Afreeca/qt
GradientWidget::GradientWidget(QWidget *parent)
    : QWidget(parent)
{
    setWindowTitle(tr("Gradients"));

    m_renderer = new GradientRenderer(this);

    QGroupBox *mainGroup = new QGroupBox(this);
    mainGroup->setTitle(tr("Gradients"));

    QGroupBox *editorGroup = new QGroupBox(mainGroup);
    editorGroup->setTitle(tr("Color Editor"));
    m_editor = new GradientEditor(editorGroup);

    QGroupBox *typeGroup = new QGroupBox(mainGroup);
    typeGroup->setTitle(tr("Gradient Type"));
    m_linearButton = new QRadioButton(tr("Linear Gradient"), typeGroup);
    m_radialButton = new QRadioButton(tr("Radial Gradient"), typeGroup);
    m_conicalButton = new QRadioButton(tr("Conical Gradient"), typeGroup);

    QGroupBox *spreadGroup = new QGroupBox(mainGroup);
    spreadGroup->setTitle(tr("Spread Method"));
    m_padSpreadButton = new QRadioButton(tr("Pad Spread"), spreadGroup);
    m_reflectSpreadButton = new QRadioButton(tr("Reflect Spread"), spreadGroup);
    m_repeatSpreadButton = new QRadioButton(tr("Repeat Spread"), spreadGroup);

    QGroupBox *defaultsGroup = new QGroupBox(mainGroup);
    defaultsGroup->setTitle(tr("Defaults"));
    QPushButton *default1Button = new QPushButton(tr("1"), defaultsGroup);
    QPushButton *default2Button = new QPushButton(tr("2"), defaultsGroup);
    QPushButton *default3Button = new QPushButton(tr("3"), defaultsGroup);
    QPushButton *default4Button = new QPushButton(tr("Reset"), editorGroup);

    QPushButton *showSourceButton = new QPushButton(mainGroup);
    showSourceButton->setText(tr("Show Source"));
#ifdef QT_OPENGL_SUPPORT
    QPushButton *enableOpenGLButton = new QPushButton(mainGroup);
    enableOpenGLButton->setText(tr("Use OpenGL"));
    enableOpenGLButton->setCheckable(true);
    enableOpenGLButton->setChecked(m_renderer->usesOpenGL());
    if (!QGLFormat::hasOpenGL())
        enableOpenGLButton->hide();
#endif
    QPushButton *whatsThisButton = new QPushButton(mainGroup);
    whatsThisButton->setText(tr("What's This?"));
    whatsThisButton->setCheckable(true);

    // Layouts
    QHBoxLayout *mainLayout = new QHBoxLayout(this);
    mainLayout->addWidget(m_renderer);
    mainLayout->addWidget(mainGroup);

    mainGroup->setFixedWidth(180);
    QVBoxLayout *mainGroupLayout = new QVBoxLayout(mainGroup);
    mainGroupLayout->addWidget(editorGroup);
    mainGroupLayout->addWidget(typeGroup);
    mainGroupLayout->addWidget(spreadGroup);
    mainGroupLayout->addWidget(defaultsGroup);
    mainGroupLayout->addStretch(1);
    mainGroupLayout->addWidget(showSourceButton);
#ifdef QT_OPENGL_SUPPORT
    mainGroupLayout->addWidget(enableOpenGLButton);
#endif
    mainGroupLayout->addWidget(whatsThisButton);

    QVBoxLayout *editorGroupLayout = new QVBoxLayout(editorGroup);
    editorGroupLayout->addWidget(m_editor);

    QVBoxLayout *typeGroupLayout = new QVBoxLayout(typeGroup);
    typeGroupLayout->addWidget(m_linearButton);
    typeGroupLayout->addWidget(m_radialButton);
    typeGroupLayout->addWidget(m_conicalButton);

    QVBoxLayout *spreadGroupLayout = new QVBoxLayout(spreadGroup);
    spreadGroupLayout->addWidget(m_padSpreadButton);
    spreadGroupLayout->addWidget(m_repeatSpreadButton);
    spreadGroupLayout->addWidget(m_reflectSpreadButton);

    QHBoxLayout *defaultsGroupLayout = new QHBoxLayout(defaultsGroup);
    defaultsGroupLayout->addWidget(default1Button);
    defaultsGroupLayout->addWidget(default2Button);
    defaultsGroupLayout->addWidget(default3Button);
    editorGroupLayout->addWidget(default4Button);

    connect(m_editor, SIGNAL(gradientStopsChanged(QGradientStops)),
            m_renderer, SLOT(setGradientStops(QGradientStops)));

    connect(m_linearButton, SIGNAL(clicked()), m_renderer, SLOT(setLinearGradient()));
    connect(m_radialButton, SIGNAL(clicked()), m_renderer, SLOT(setRadialGradient()));
    connect(m_conicalButton, SIGNAL(clicked()), m_renderer, SLOT(setConicalGradient()));

    connect(m_padSpreadButton, SIGNAL(clicked()), m_renderer, SLOT(setPadSpread()));
    connect(m_reflectSpreadButton, SIGNAL(clicked()), m_renderer, SLOT(setReflectSpread()));
    connect(m_repeatSpreadButton, SIGNAL(clicked()), m_renderer, SLOT(setRepeatSpread()));

    connect(default1Button, SIGNAL(clicked()), this, SLOT(setDefault1()));
    connect(default2Button, SIGNAL(clicked()), this, SLOT(setDefault2()));
    connect(default3Button, SIGNAL(clicked()), this, SLOT(setDefault3()));
    connect(default4Button, SIGNAL(clicked()), this, SLOT(setDefault4()));

    connect(showSourceButton, SIGNAL(clicked()), m_renderer, SLOT(showSource()));
#ifdef QT_OPENGL_SUPPORT
    connect(enableOpenGLButton, SIGNAL(clicked(bool)), m_renderer, SLOT(enableOpenGL(bool)));
#endif    
    connect(whatsThisButton, SIGNAL(clicked(bool)), m_renderer, SLOT(setDescriptionEnabled(bool)));
    connect(whatsThisButton, SIGNAL(clicked(bool)),
            m_renderer->hoverPoints(), SLOT(setDisabled(bool)));
    connect(m_renderer, SIGNAL(descriptionEnabledChanged(bool)),
            whatsThisButton, SLOT(setChecked(bool)));
    connect(m_renderer, SIGNAL(descriptionEnabledChanged(bool)),
            m_renderer->hoverPoints(), SLOT(setDisabled(bool)));

    m_renderer->loadSourceFile(":res/gradients/gradients.cpp");
    m_renderer->loadDescription(":res/gradients/gradients.html");

    QTimer::singleShot(50, this, SLOT(setDefault1()));
}
CriticalPowerWindow::CriticalPowerWindow(const QDir &home, MainWindow *parent, bool rangemode) :
    GcWindow(parent), _dateRange("{00000000-0000-0000-0000-000000000001}"), home(home), mainWindow(parent), currentRide(NULL), rangemode(rangemode), stale(true)
{
    setInstanceName("Critical Power Window");

    // main plot area
    QVBoxLayout *vlayout = new QVBoxLayout;
    cpintPlot = new CpintPlot(mainWindow, home.path(), mainWindow->zones());
    vlayout->addWidget(cpintPlot);
    setLayout(vlayout);

    // controls
    QWidget *c = new QWidget;
    QVBoxLayout *cl = new QVBoxLayout(c);
    setControls(c);

#ifdef GC_HAVE_LUCENE
    // searchbox
    searchBox = new SearchFilterBox(this, parent);
    connect(searchBox, SIGNAL(searchClear()), cpintPlot, SLOT(clearFilter()));
    connect(searchBox, SIGNAL(searchResults(QStringList)), cpintPlot, SLOT(setFilter(QStringList)));
    connect(searchBox, SIGNAL(searchClear()), this, SLOT(filterChanged()));
    connect(searchBox, SIGNAL(searchResults(QStringList)), this, SLOT(filterChanged()));
    cl->addWidget(searchBox);
#endif

    // picker details
    QFormLayout *cpintPickerLayout = new QFormLayout;
    QLabel *cpintTimeLabel = new QLabel(tr("Duration:"), this);
    cpintTimeValue = new QLineEdit("0 s");
    QLabel *cpintTodayLabel = new QLabel(tr("Today:"), this);
    cpintTodayValue = new QLabel(tr("no data"));
    QLabel *cpintAllLabel = new QLabel(tr("Best:"), this);
    cpintAllValue = new QLabel(tr("no data"));
    QLabel *cpintCPLabel = new QLabel(tr("CP Curve:"), this);
    cpintCPValue = new QLabel(tr("no data"));

    //QFontMetrics metrics(QApplication::font());
    //int width = metrics.width("8888 watts (88/88/8888)") + 10;
    //cpintAllValue->setFixedWidth(width);
    //cpintCPValue->setFixedWidth(width); // so lines up nicely

    cpintTimeValue->setReadOnly(false);
    //cpintTodayValue->setReadOnly(true);
    //cpintAllValue->setReadOnly(true);
    //cpintCPValue->setReadOnly(true);

    QFont font = cpintTimeValue->font();
    font.setPointSize(font.pointSize());
    cpintTodayValue->setFont(font);
    cpintAllValue->setFont(font);
    cpintCPValue->setFont(font);

    cpintPickerLayout->addRow(cpintTimeLabel, cpintTimeValue);
    cpintPickerLayout->addRow(cpintTodayLabel, cpintTodayValue);
    cpintPickerLayout->addRow(cpintAllLabel, cpintAllValue);
    cpintPickerLayout->addRow(cpintCPLabel, cpintCPValue);
    cl->addLayout(cpintPickerLayout);

    // tools /properties
    seriesCombo = new QComboBox(this);
    addSeries();
    cComboSeason = new QComboBox(this);
    seasons = parent->seasons;
    resetSeasons();
    if (rangemode) cComboSeason->hide();

    cpintSetCPButton = new QPushButton(tr("&Save CP value"), this);
    cpintSetCPButton->setEnabled(false);
    cl->addWidget(cpintSetCPButton);
    cl->addWidget(cComboSeason);
    cl->addWidget(seriesCombo);
    cl->addStretch();

    picker = new QwtPlotPicker(QwtPlot::xBottom, QwtPlot::yLeft,
                               QwtPicker::VLineRubberBand,
                               QwtPicker::AlwaysOff, cpintPlot->canvas());
    picker->setStateMachine(new QwtPickerDragPointMachine);
    picker->setRubberBandPen(GColor(CPLOTTRACKER));

    connect(picker, SIGNAL(moved(const QPoint &)), SLOT(pickerMoved(const QPoint &)));
    connect(cpintTimeValue, SIGNAL(editingFinished()), this, SLOT(cpintTimeValueEntered()));
    connect(cpintSetCPButton, SIGNAL(clicked()), this, SLOT(cpintSetCPButtonClicked()));
    if (rangemode)
        connect(this, SIGNAL(dateRangeChanged(DateRange)), SLOT(dateRangeChanged(DateRange)));
    else
        connect(cComboSeason, SIGNAL(currentIndexChanged(int)), this, SLOT(seasonSelected(int)));

    connect(seriesCombo, SIGNAL(currentIndexChanged(int)), this, SLOT(setSeries(int)));
    //connect(mainWindow, SIGNAL(rideSelected()), this, SLOT(rideSelected()));
    connect(this, SIGNAL(rideItemChanged(RideItem*)), this, SLOT(rideSelected()));
    connect(mainWindow, SIGNAL(configChanged()), cpintPlot, SLOT(configChanged()));

    // redraw on config change -- this seems the simplest approach
    connect(mainWindow, SIGNAL(configChanged()), this, SLOT(rideSelected()));
    connect(mainWindow, SIGNAL(rideAdded(RideItem*)), this, SLOT(newRideAdded(RideItem*)));
    connect(mainWindow, SIGNAL(rideDeleted(RideItem*)), this, SLOT(newRideAdded(RideItem*)));
    connect(seasons, SIGNAL(seasonsChanged()), this, SLOT(resetSeasons()));
}
示例#23
0
GliderEditorNumPad::GliderEditorNumPad(QWidget *parent, Glider *glider ) :
  QWidget(parent),
  m_gliderCreated(false)
{
  setWindowFlags(Qt::Tool);
  setWindowModality( Qt::WindowModal );
  setAttribute(Qt::WA_DeleteOnClose);

  // Resize the window to the same size as the main window has. That will
  // completely hide the parent window.
  resize( MainWindow::mainWindow()->size() );

  // save current horizontal/vertical speed unit. This unit must be considered
  // during storage.
  m_currHSpeedUnit = Speed::getHorizontalUnit();
  m_currVSpeedUnit = Speed::getVerticalUnit();

  if (glider == 0)
    {
      setWindowTitle(tr("New Glider"));
      m_isNew = true;
    }
  else
    {
      setWindowTitle(tr("Edit Glider"));
      m_isNew = false;
    }

  m_glider = glider;

  QHBoxLayout* topLayout = new QHBoxLayout(this);
  QGridLayout* itemsLayout = new QGridLayout;
  itemsLayout->setHorizontalSpacing(10);
  itemsLayout->setVerticalSpacing(10);
  int row = 0;

  if( m_isNew )
    {
      itemsLayout->addWidget(new QLabel(tr("Glider Pool:"), this), row, 0);
      m_openGliderList = new QPushButton( tr("Open") );
      itemsLayout->addWidget(m_openGliderList, row, 1, 1, 3);

      connect( m_openGliderList, SIGNAL(clicked()),
	       SLOT(slot_openGliderSelectionList()) );
      row++;
    }

  Qt::InputMethodHints imh = Qt::ImhNoAutoUppercase | Qt::ImhNoPredictiveText;

  itemsLayout->addWidget(new QLabel(tr("Glider Type:"), this), row, 0);
  m_edtGType = new QLineEdit(this);
  imh |= m_edtGType->inputMethodHints();
  m_edtGType->setInputMethodHints(imh);

  connect( m_edtGType, SIGNAL(returnPressed()),
           MainWindow::mainWindow(), SLOT(slotCloseSip()) );

  itemsLayout->addWidget(m_edtGType, row, 1, 1, 3);
  row++;

  itemsLayout->addWidget(new QLabel(tr("Registration:"), this), row, 0);
  m_edtGReg = new QLineEdit(this);
  m_edtGReg->setInputMethodHints(imh);

  connect( m_edtGReg, SIGNAL(returnPressed()),
           MainWindow::mainWindow(), SLOT(slotCloseSip()) );

  itemsLayout->addWidget(m_edtGReg, row, 1);

  itemsLayout->addWidget(new QLabel(tr("Seats:"), this), row, 2);
  m_seats = new QPushButton( this );
  itemsLayout->addWidget(m_seats, row, 3);

  connect( m_seats, SIGNAL(clicked()), SLOT(slot_changeSeats()) );
  row++;

  itemsLayout->addWidget(new QLabel(tr("Call Sign:"), this), row, 0);
  m_edtGCall = new QLineEdit(this);
  m_edtGCall->setInputMethodHints(imh);

  connect( m_edtGCall, SIGNAL(returnPressed()),
           MainWindow::mainWindow(), SLOT(slotCloseSip()) );

  itemsLayout->addWidget(m_edtGCall, row, 1);

  itemsLayout->addWidget(new QLabel(tr("Wing Area:"), this), row, 2);

  m_dneWingArea = new DoubleNumberEditor(this);
  m_dneWingArea->setDecimalVisible( true );
  m_dneWingArea->setPmVisible( false );
  m_dneWingArea->setMaxLength(7);
  m_dneWingArea->setDecimals( 2 );
  QChar tsChar(Qt::Key_twosuperior);
  m_dneWingArea->setSuffix( QString(" m") + tsChar );
  itemsLayout->addWidget(m_dneWingArea, row, 3);
  row++;

  itemsLayout->setRowMinimumHeight(row++, 10);

  QGridLayout* spinboxLayout = new QGridLayout;
  spinboxLayout->setHorizontalSpacing(10);
  spinboxLayout->setVerticalSpacing(10);
  int srow = 0;

  spinboxLayout->addWidget(new QLabel("v1:", this), srow, 0);

  m_dneV1 = new DoubleNumberEditor(this);
  m_dneV1->setDecimalVisible( true );
  m_dneV1->setPmVisible( false );
  m_dneV1->setMaxLength(5);
  m_dneV1->setRange(0.0, 250.0);
  m_dneV1->setDecimals( 1 );
  m_dneV1->setSuffix( " " + Speed::getHorizontalUnitText() );
  spinboxLayout->addWidget(m_dneV1, srow, 1);

  spinboxLayout->addWidget(new QLabel("w1:", this), srow, 2);

  m_dneW1 = new DoubleNumberEditor(this);
  m_dneW1->setDecimalVisible( true );
  m_dneW1->setPmVisible( true );
  m_dneW1->setMaxLength(7);
  m_dneW1->setDecimals( 2 );
  m_dneW1->setSuffix( " " + Speed::getVerticalUnitText() );

  QRegExpValidator *eValidator = new QRegExpValidator( QRegExp( "-[0-9]+\\.?[0-9]*" ), this );
  m_dneW1->setValidator(eValidator);

  spinboxLayout->addWidget(m_dneW1, srow, 3);

  spinboxLayout->addWidget(new QLabel(tr("Ref. weight:"), this), srow, 4);

  m_grossWeight = new NumberEditor( this );
  m_grossWeight->setDecimalVisible( false );
  m_grossWeight->setPmVisible( false );
  m_grossWeight->setMaxLength(4);
  m_grossWeight->setSuffix(" kg");
  m_grossWeight->setRange( 0, 9999 );
  spinboxLayout->addWidget(m_grossWeight, srow, 5);
  srow++;

  spinboxLayout->addWidget(new QLabel("v2", this), srow, 0);

  m_dneV2 = new DoubleNumberEditor(this);
  m_dneV2->setDecimalVisible( true );
  m_dneV2->setPmVisible( false );
  m_dneV2->setMaxLength(5);
  m_dneV2->setRange(0.0, 250.0);
  m_dneV2->setDecimals( 1 );
  m_dneV2->setSuffix( " " + Speed::getHorizontalUnitText() );
  spinboxLayout->addWidget(m_dneV2, srow, 1);

  spinboxLayout->addWidget(new QLabel("w2:", this), srow, 2);

  m_dneW2 = new DoubleNumberEditor(this);
  m_dneW2->setDecimalVisible( true );
  m_dneW2->setPmVisible( true );
  m_dneW2->setMaxLength(7);
  m_dneW2->setDecimals( 2 );
  m_dneW2->setSuffix( " " + Speed::getVerticalUnitText() );

  eValidator = new QRegExpValidator( QRegExp( "-[0-9]+\\.?[0-9]*" ), this );
  m_dneW2->setValidator(eValidator);

  spinboxLayout->addWidget(m_dneW2, srow, 3);

  spinboxLayout->addWidget(new QLabel(tr("Load corr.:"), this), srow, 4);

  m_addedLoad = new NumberEditor( this );
  m_addedLoad->setDecimalVisible( false );
  m_addedLoad->setPmVisible( true );
  m_addedLoad->setMaxLength(4);
  m_addedLoad->setSuffix(" kg");
  m_addedLoad->setRange( -999, 999 );
  spinboxLayout->addWidget(m_addedLoad, srow, 5);
  srow++;

  spinboxLayout->addWidget(new QLabel("v3:", this), srow, 0);

  m_dneV3 = new DoubleNumberEditor(this);
  m_dneV3->setDecimalVisible( true );
  m_dneV3->setPmVisible( false );
  m_dneV3->setMaxLength(5);
  m_dneV3->setRange(0.0, 250.0);
  m_dneV3->setDecimals( 1 );
  m_dneV3->setSuffix( " " + Speed::getHorizontalUnitText() );
  spinboxLayout->addWidget(m_dneV3, srow, 1);

  spinboxLayout->addWidget(new QLabel("w3:", this), srow, 2);

  m_dneW3 = new DoubleNumberEditor(this);
  m_dneW3->setDecimalVisible( true );
  m_dneW3->setPmVisible( true );
  m_dneW3->setMaxLength(7);
  m_dneW3->setDecimals( 2 );
  m_dneW3->setSuffix( " " + Speed::getVerticalUnitText() );

  eValidator = new QRegExpValidator( QRegExp( "-[0-9]+\\.?[0-9]*" ), this );
  m_dneW3->setValidator(eValidator);

  spinboxLayout->addWidget(m_dneW3, srow, 3);

  spinboxLayout->addWidget(new QLabel(tr("Max. water:"), this), srow, 4);

  m_addedWater = new NumberEditor( this );
  m_addedWater->setDecimalVisible( false );
  m_addedWater->setPmVisible( false );
  m_addedWater->setMaxLength(4);
  m_addedWater->setSuffix(" l");
  m_addedWater->setRange( 0, 9999 );
  spinboxLayout->addWidget(m_addedWater, srow++, 5);
  spinboxLayout->setColumnStretch(6, 10);
  spinboxLayout->setRowMinimumHeight(srow++, 20);

  m_buttonShow = new QPushButton(tr("Show Polar"));

  QHBoxLayout* buttonRow = new QHBoxLayout;
  buttonRow->setSpacing(0);
  buttonRow->addStretch( 10 );
  buttonRow->addWidget( m_buttonShow );

  spinboxLayout->addLayout(buttonRow, srow++, 0, 1, 6);
  spinboxLayout->setRowStretch( srow++, 10 );

  itemsLayout->addLayout(spinboxLayout, row++, 0, 1, 4);
  itemsLayout->setColumnStretch( 1, 10 );
  itemsLayout->setColumnStretch( 4, 20 );

  connect(m_buttonShow, SIGNAL(pressed()), this, SLOT(slotButtonShow()));

  QPushButton *cancel = new QPushButton(this);
  cancel->setIcon(QIcon(GeneralConfig::instance()->loadPixmap("cancel.png")));
  cancel->setIconSize(QSize(Layout::getButtonSize(12), Layout::getButtonSize(12)));
  cancel->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::QSizePolicy::Preferred);

  QPushButton *ok = new QPushButton(this);
  ok->setIcon(QIcon(GeneralConfig::instance()->loadPixmap("ok.png")));
  ok->setIconSize(QSize(Layout::getButtonSize(12), Layout::getButtonSize(12)));
  ok->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::QSizePolicy::Preferred);

  connect(ok, SIGNAL(pressed()), this, SLOT(accept()));
  connect(cancel, SIGNAL(pressed()), this, SLOT(reject()));

  QVBoxLayout *buttonBox = new QVBoxLayout;
  buttonBox->setSpacing(0);
  buttonBox->addStretch(2);
  buttonBox->addWidget(cancel, 1);
  buttonBox->addSpacing(30);
  buttonBox->addWidget(ok, 1);
  buttonBox->addStretch(2);

  topLayout->addLayout(itemsLayout);
  topLayout->addLayout(buttonBox);

  if( m_isNew )
    {
      readLK8000PolarData();
    }
  else
    {
      load();
    }

  show();
}
示例#24
0
void UIVMCloseDialog::prepare()
{
    /* Prepare 'main' layout: */
    QVBoxLayout *pMainLayout = new QVBoxLayout(this);
    {
        /* Prepare 'top' layout: */
        QHBoxLayout *pTopLayout = new QHBoxLayout;
        {
            /* Prepare 'top-left' layout: */
            QVBoxLayout *pTopLeftLayout = new QVBoxLayout;
            {
                /* Prepare 'icon': */
                m_pIcon = new QLabel(this);
                {
                    /* Configure icon: */
                    m_pIcon->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
                    m_pIcon->setPixmap(QPixmap(":/os_unknown.png"));
                }
                /* Configure layout: */
                pTopLeftLayout->setSpacing(0);
                pTopLeftLayout->setContentsMargins(0, 0, 0, 0);
                pTopLeftLayout->addWidget(m_pIcon);
                pTopLeftLayout->addStretch();
            }
            /* Prepare 'top-right' layout: */
            QVBoxLayout *pTopRightLayout = new QVBoxLayout;
            {
                /* Prepare 'text' label: */
                m_pLabel = new QLabel(this);
                /* Prepare 'choice' layout: */
                QGridLayout *pChoiceLayout = new QGridLayout;
                {
                    /* Prepare 'detach' icon: */
                    m_pDetachIcon = new QLabel(this);
                    {
                        /* Configure icon: */
                        m_pDetachIcon->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
                        m_pDetachIcon->setPixmap(QPixmap(":/vm_create_shortcut_16px.png"));
                    }
                    /* Prepare 'detach' radio-button: */
                    m_pDetachRadio = new QRadioButton(this);
                    {
                        /* Configure button: */
                        m_pDetachRadio->installEventFilter(this);
                        connect(m_pDetachRadio, SIGNAL(toggled(bool)), this, SLOT(sltUpdateWidgetAvailability()));
                    }
                    /* Prepare 'save' icon: */
                    m_pSaveIcon = new QLabel(this);
                    {
                        /* Configure icon: */
                        m_pSaveIcon->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
                        m_pSaveIcon->setPixmap(QPixmap(":/vm_save_state_16px.png"));
                    }
                    /* Prepare 'save' radio-button: */
                    m_pSaveRadio = new QRadioButton(this);
                    {
                        /* Configure button: */
                        m_pSaveRadio->installEventFilter(this);
                        connect(m_pSaveRadio, SIGNAL(toggled(bool)), this, SLOT(sltUpdateWidgetAvailability()));
                    }
                    /* Prepare 'shutdown' icon: */
                    m_pShutdownIcon = new QLabel(this);
                    {
                        /* Configure icon: */
                        m_pShutdownIcon->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
                        m_pShutdownIcon->setPixmap(QPixmap(":/vm_shutdown_16px.png"));
                    }
                    /* Prepare 'shutdown' radio-button: */
                    m_pShutdownRadio = new QRadioButton(this);
                    {
                        /* Configure button: */
                        m_pShutdownRadio->installEventFilter(this);
                        connect(m_pShutdownRadio, SIGNAL(toggled(bool)), this, SLOT(sltUpdateWidgetAvailability()));
                    }
                    /* Prepare 'power-off' icon: */
                    m_pPowerOffIcon = new QLabel(this);
                    {
                        /* Configure icon: */
                        m_pPowerOffIcon->setSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed);
                        m_pPowerOffIcon->setPixmap(QPixmap(":/vm_poweroff_16px.png"));
                    }
                    /* Prepare 'shutdown' radio-button: */
                    m_pPowerOffRadio = new QRadioButton(this);
                    {
                        /* Configure button: */
                        m_pPowerOffRadio->installEventFilter(this);
                        connect(m_pPowerOffRadio, SIGNAL(toggled(bool)), this, SLOT(sltUpdateWidgetAvailability()));
                    }
                    /* Prepare 'discard' check-box: */
                    m_pDiscardCheckBox = new QCheckBox(this);
                    /* Configure layout: */
#ifdef VBOX_WS_MAC
                    pChoiceLayout->setSpacing(15);
#else /* VBOX_WS_MAC */
                    pChoiceLayout->setSpacing(6);
#endif /* !VBOX_WS_MAC */
                    pChoiceLayout->setContentsMargins(0, 0, 0, 0);
                    pChoiceLayout->addWidget(m_pDetachIcon, 0, 0);
                    pChoiceLayout->addWidget(m_pDetachRadio, 0, 1);
                    pChoiceLayout->addWidget(m_pSaveIcon, 1, 0);
                    pChoiceLayout->addWidget(m_pSaveRadio, 1, 1);
                    pChoiceLayout->addWidget(m_pShutdownIcon, 2, 0);
                    pChoiceLayout->addWidget(m_pShutdownRadio, 2, 1);
                    pChoiceLayout->addWidget(m_pPowerOffIcon, 3, 0);
                    pChoiceLayout->addWidget(m_pPowerOffRadio, 3, 1);
                    pChoiceLayout->addWidget(m_pDiscardCheckBox, 4, 1);
                }
                /* Configure layout: */
#ifdef VBOX_WS_MAC
                pTopRightLayout->setSpacing(15);
#else /* VBOX_WS_MAC */
                pTopRightLayout->setSpacing(6);
#endif /* !VBOX_WS_MAC */
                pTopRightLayout->setContentsMargins(0, 0, 0, 0);
                pTopRightLayout->addWidget(m_pLabel);
                pTopRightLayout->addItem(pChoiceLayout);
            }
            /* Configure layout: */
            pTopLayout->setSpacing(20);
            pTopLayout->setContentsMargins(0, 0, 0, 0);
            pTopLayout->addItem(pTopLeftLayout);
            pTopLayout->addItem(pTopRightLayout);
        }
        /* Prepare button-box: */
        QIDialogButtonBox *pButtonBox = new QIDialogButtonBox(this);
        {
            /* Configure button-box: */
            pButtonBox->setStandardButtons(QDialogButtonBox::Cancel | QDialogButtonBox::Help | QDialogButtonBox::NoButton | QDialogButtonBox::Ok);
            connect(pButtonBox, SIGNAL(accepted()), this, SLOT(accept()));
            connect(pButtonBox, SIGNAL(rejected()), this, SLOT(reject()));
            connect(pButtonBox, SIGNAL(helpRequested()), &msgCenter(), SLOT(sltShowHelpHelpDialog()));
        }
        /* Configure layout: */
        pMainLayout->setSpacing(20);
#ifdef VBOX_WS_MAC
        pMainLayout->setContentsMargins(40, 20, 40, 20);
#endif /* VBOX_WS_MAC */
        pMainLayout->addItem(pTopLayout);
        pMainLayout->addWidget(pButtonBox);
    }
    /* Prepare size-grip token: */
    setSizeGripEnabled(false);
}
WirelessPage::WirelessPage(WirelessDevice *dev, QWidget *parent)
    : ContentWidget(parent),
      m_device(dev),
      m_listGroup(new SettingsGroup),
      m_tipsGroup(new SettingsGroup),
      m_connectHideSSID(new AccessPointWidget(this)),
      m_closeHotspotBtn(new QPushButton),
      m_currentClickApw(nullptr),
      m_sortDelayTimer(new QTimer(this)),
      m_indicatorDelayTimer(new QTimer(this))
{
    m_sortDelayTimer->setInterval(100);
    m_sortDelayTimer->setSingleShot(true);

    m_indicatorDelayTimer->setInterval(300);
    m_indicatorDelayTimer->setSingleShot(true);

    m_connectHideSSID->setAPName(tr("Connect to hidden network"));
    m_connectHideSSID->setStrength(-1);

    m_closeHotspotBtn->setText(tr("Close Hotspot"));

    TipsItem *tips = new TipsItem;
    tips->setText(tr("Please disable hotspot sharing first if you want to connect to a wireless network"));

    m_tipsGroup->appendItem(tips);
    m_listGroup->appendItem(m_connectHideSSID);

    QVBoxLayout *mainLayout = new QVBoxLayout;
    mainLayout->setSpacing(0);
    mainLayout->setContentsMargins(0, 0, 0, 0);
    mainLayout->addSpacing(10);
    mainLayout->addWidget(m_listGroup);
    mainLayout->addWidget(m_tipsGroup);
    mainLayout->addSpacing(10);
    mainLayout->addWidget(m_closeHotspotBtn);
    mainLayout->addSpacing(10);
    mainLayout->addStretch();

    QWidget *mainWidget = new TranslucentFrame;
    mainWidget->setLayout(mainLayout);

    setContent(mainWidget);
#ifdef QT_DEBUG
    setTitle(m_device->path());
#else
    setTitle(tr("WLAN"));
#endif

    connect(m_sortDelayTimer, &QTimer::timeout, this, &WirelessPage::sortAPList);
    connect(m_indicatorDelayTimer, &QTimer::timeout, this, &WirelessPage::refreshLoadingIndicator);
    connect(m_connectHideSSID, &AccessPointWidget::requestEdit, this, &WirelessPage::showConnectHidePage);
    connect(m_closeHotspotBtn, &QPushButton::clicked, this, &WirelessPage::onCloseHotspotClicked);
    connect(m_device, &WirelessDevice::apAdded, this, &WirelessPage::onAPAdded);
    connect(m_device, &WirelessDevice::apInfoChanged, this, &WirelessPage::onAPChanged);
    connect(m_device, &WirelessDevice::apRemoved, this, &WirelessPage::onAPRemoved);
    connect(m_device, &WirelessDevice::activeWirelessConnectionInfoChanged, this, &WirelessPage::updateActiveAp);
    connect(m_device, &WirelessDevice::hotspotEnabledChanged, this, &WirelessPage::onHotspotEnableChanged);
    connect(m_device, &WirelessDevice::removed, this, &WirelessPage::onDeviceRemoved);
    connect(m_device, &WirelessDevice::activateAccessPointFailed, this, &WirelessPage::onActivateApFailed);
    connect(m_device, &WirelessDevice::activeConnectionsChanged, m_indicatorDelayTimer, static_cast<void (QTimer::*) ()>(&QTimer::start));

    // init data
    const QJsonArray mApList = m_device->apList();
    if (!mApList.isEmpty()) {
        for (auto ap : mApList) {
            onAPAdded(ap.toObject());
        }
    }
    QTimer::singleShot(100, this, [=] {
        Q_EMIT requestDeviceAPList(m_device->path());
        Q_EMIT requestWirelessScan();
    });
}
示例#26
0
PlayerBox::PlayerBox(bool playerOne, QWidget* parent, const char* name)
  : QGroupBox(parent, name)
{
  QHBoxLayout* l = new QHBoxLayout(this, PLAYERBOX_BORDERS, 
				   PLAYERBOX_HDISTANCEOFWIDGETS);

  // The card and "held" label arrays.
  m_cardWidgets = new CardWidget *[PokerHandSize];
  m_heldLabels  = new QLabel *[PokerHandSize];

  QFont myFixedFont;
  myFixedFont.setPointSize(12);

  // Generate the 5 cards
  for (int i = 0; i < PokerHandSize; i++) {
    QVBoxLayout* vl = new QVBoxLayout(0);
    l->addLayout(vl, 0);

    QHBox* cardBox = new QHBox(this);
    vl->addWidget(cardBox, 0);
    cardBox->setFrameStyle(Box | Sunken);
    m_cardWidgets[i] = new CardWidget(cardBox);
    cardBox->setFixedSize(cardBox->sizeHint());

    // Only add the "held" labels if this is the first player (the human one).
    if (playerOne) {
      QHBox* b = new QHBox(this);
      m_heldLabels[i] = new QLabel(b);
      m_heldLabels[i]->setText(i18n("Held"));
      b->setFrameStyle(Box | Sunken);
      b->setFixedSize(b->sizeHint());
      m_cardWidgets[i]->heldLabel = m_heldLabels[i];

      QHBoxLayout* heldLayout = new QHBoxLayout(0);
      heldLayout->addWidget(b, 0, AlignCenter);
      vl->insertLayout(0, heldLayout, 0);
      vl->insertStretch(0, 1);
      vl->addStretch(1);
    }
  }

  // Add the cash and bet labels.
  {
    QVBoxLayout* vl = new QVBoxLayout;
    l->addLayout(vl);
    vl->addStretch();

    m_cashLabel = new QLabel(this);
    m_cashLabel->setFrameStyle(QFrame::WinPanel | QFrame::Sunken);
    m_cashLabel->setFont(myFixedFont);
    vl->addWidget(m_cashLabel, 0, AlignHCenter);
    vl->addStretch();

    m_betLabel = new QLabel(this);
    m_betLabel->setFrameStyle(QFrame::WinPanel | QFrame::Sunken);
    m_betLabel->setFont(myFixedFont);
    vl->addWidget(m_betLabel, 0, AlignHCenter);
    vl->addStretch();
  }

  QToolTip::add(m_cashLabel,
		i18n("Money of %1").arg("Player"));//change via showName()

  // Assume that we have a multiplayer game.
  m_singlePlayer = false;
}
示例#27
0
void PathDeformControls::layoutForDesktop()
{
    QGroupBox* mainGroup = new QGroupBox(this);
    mainGroup->setTitle(tr("Controls"));

    QGroupBox *radiusGroup = new QGroupBox(mainGroup);
    radiusGroup->setTitle(tr("Lens Radius"));
    QSlider *radiusSlider = new QSlider(Qt::Horizontal, radiusGroup);
    radiusSlider->setRange(15, 150);
    radiusSlider->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Fixed);

    QGroupBox *deformGroup = new QGroupBox(mainGroup);
    deformGroup->setTitle(tr("Deformation"));
    QSlider *deformSlider = new QSlider(Qt::Horizontal, deformGroup);
    deformSlider->setRange(-100, 100);
    deformSlider->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Fixed);

    QGroupBox *fontSizeGroup = new QGroupBox(mainGroup);
    fontSizeGroup->setTitle(tr("Font Size"));
    QSlider *fontSizeSlider = new QSlider(Qt::Horizontal, fontSizeGroup);
    fontSizeSlider->setRange(16, 200);
    fontSizeSlider->setSizePolicy(QSizePolicy::Preferred, QSizePolicy::Fixed);

    QGroupBox *textGroup = new QGroupBox(mainGroup);
    textGroup->setTitle(tr("Text"));
    QLineEdit *textInput = new QLineEdit(textGroup);

    QPushButton *animateButton = new QPushButton(mainGroup);
    animateButton->setText(tr("Animated"));
    animateButton->setCheckable(true);

    QPushButton *showSourceButton = new QPushButton(mainGroup);
    showSourceButton->setText(tr("Show Source"));

#ifdef QT_OPENGL_SUPPORT
    QPushButton *enableOpenGLButton = new QPushButton(mainGroup);
    enableOpenGLButton->setText(tr("Use OpenGL"));
    enableOpenGLButton->setCheckable(true);
    enableOpenGLButton->setChecked(m_renderer->usesOpenGL());
    if (!QGLFormat::hasOpenGL())
        enableOpenGLButton->hide();
#endif

    QPushButton *whatsThisButton = new QPushButton(mainGroup);
    whatsThisButton->setText(tr("What's This?"));
    whatsThisButton->setCheckable(true);


    mainGroup->setFixedWidth(180);

    QVBoxLayout *mainGroupLayout = new QVBoxLayout(mainGroup);
    mainGroupLayout->addWidget(radiusGroup);
    mainGroupLayout->addWidget(deformGroup);
    mainGroupLayout->addWidget(fontSizeGroup);
    mainGroupLayout->addWidget(textGroup);
    mainGroupLayout->addWidget(animateButton);
    mainGroupLayout->addStretch(1);
#ifdef QT_OPENGL_SUPPORT
    mainGroupLayout->addWidget(enableOpenGLButton);
#endif
    mainGroupLayout->addWidget(showSourceButton);
    mainGroupLayout->addWidget(whatsThisButton);

    QVBoxLayout *radiusGroupLayout = new QVBoxLayout(radiusGroup);
    radiusGroupLayout->addWidget(radiusSlider);

    QVBoxLayout *deformGroupLayout = new QVBoxLayout(deformGroup);
    deformGroupLayout->addWidget(deformSlider);

    QVBoxLayout *fontSizeGroupLayout = new QVBoxLayout(fontSizeGroup);
    fontSizeGroupLayout->addWidget(fontSizeSlider);

    QVBoxLayout *textGroupLayout = new QVBoxLayout(textGroup);
    textGroupLayout->addWidget(textInput);

    QVBoxLayout * mainLayout = new QVBoxLayout(this);
    mainLayout->addWidget(mainGroup);
    mainLayout->setMargin(0);

    connect(radiusSlider, SIGNAL(valueChanged(int)), m_renderer, SLOT(setRadius(int)));
    connect(deformSlider, SIGNAL(valueChanged(int)), m_renderer, SLOT(setIntensity(int)));
    connect(fontSizeSlider, SIGNAL(valueChanged(int)), m_renderer, SLOT(setFontSize(int)));
    connect(animateButton, SIGNAL(clicked(bool)), m_renderer, SLOT(setAnimated(bool)));
#ifdef QT_OPENGL_SUPPORT
    connect(enableOpenGLButton, SIGNAL(clicked(bool)), m_renderer, SLOT(enableOpenGL(bool)));
#endif

    connect(textInput, SIGNAL(textChanged(QString)), m_renderer, SLOT(setText(QString)));
    connect(m_renderer, SIGNAL(descriptionEnabledChanged(bool)),
            whatsThisButton, SLOT(setChecked(bool)));
    connect(whatsThisButton, SIGNAL(clicked(bool)), m_renderer, SLOT(setDescriptionEnabled(bool)));
    connect(showSourceButton, SIGNAL(clicked()), m_renderer, SLOT(showSource()));

    animateButton->animateClick();
    deformSlider->setValue(80);
    fontSizeSlider->setValue(120);
    radiusSlider->setValue(100);
    textInput->setText(tr("Qt"));
}
示例#28
0
文件: cube2d.cpp 项目: yslib/cube
Cube2d::Cube2d(const QVector<Video *> videos,QWidget * parent /* = 0 */) :QWidget(parent)
{
	this->videos = videos;
	timer = new QTimer(this);

	connect(timer, SIGNAL(timeout()), this, SLOT(refreshCude()));
	
	//cubeLabel->setGeometry(0, 0, 500, 500);
	faceColors.resize(54);
	
	margin = (FlatLenth - 3*SquareLenth) / 3;

	FBLRUD = new std::vector<QPoint>;

	FBLRUD->push_back(QPoint(2*FlatMargin + FlatLenth,2*FlatMargin+FlatLenth));					//f
	FBLRUD->push_back(QPoint(4 * FlatMargin + 3*FlatLenth, 2 * FlatMargin + FlatLenth));			//b
	FBLRUD->push_back(QPoint(1 * FlatMargin + 0*FlatLenth, 2 * FlatMargin + FlatLenth));			//l	
	FBLRUD->push_back(QPoint(3 * FlatMargin + 2*FlatLenth, 2 * FlatMargin + FlatLenth));			//r
	FBLRUD->push_back(QPoint(2 * FlatMargin + FlatLenth, 1 * FlatMargin + 0 * FlatLenth));			//u
	FBLRUD->push_back(QPoint(2 * FlatMargin + FlatLenth, 3 * FlatMargin + 2*FlatLenth));			//d

	//初始化square 的矩形
	for (int k = 0; k < 6; k++)
	{
		for (int i = 0; i < 3; i++)
		{
			for (int j = 0; j < 3; j++)
			{
				int leftTopX = FBLRUD->operator[](k).x();
				int leftTopY = FBLRUD->operator[](k).y();
				squareRects.push_back(QRectF(
					leftTopX + (j + 1)*margin + j*SquareLenth,
					leftTopY + (i + 1)*margin + i*SquareLenth,
					SquareLenth,
					SquareLenth));
			}
		}
	}

	cubeImage = new QImage(QSize(400,400),QImage::Format_ARGB32);
	cubeLabel = new QLabel(this);
	cubeLabel->setGeometry(0, 0, 400, 400);

	painter = new QPainter(this);

//	file = new QFile("color.txt");
//	if (file->open(QIODevice::ReadWrite | QIODevice::Text) == false)
//	{
//		QMessageBox::warning(this, tr("can not open file"), tr("can not open file"));
//	}

	//cubeLabel->setGeometry(100, 100, 1500, 300);
	videoComboBox = new QComboBox(this);
	videoComboBox->addItem("Camera 1");
	videoComboBox->addItem("Camera 2");
	videoComboBox->addItem("Camera 3");
	videoComboBox->addItem("Camera 4");

	videosDetectAreaArray.resize(4);
	for (int i = 0; i < 6;i++)
		areaTable.push_back(QRect((*FBLRUD)[i],(*FBLRUD)[i]+QPoint(FlatLenth,FlatLenth)));
    
    model = cv::ml::SVM::StatModel::load<cv::ml::SVM>("svm.xml");

	/*布局*/
	QHBoxLayout * hLayout = new QHBoxLayout(this);
	hLayout->addWidget(cubeLabel);
	hLayout->addStretch();
	QVBoxLayout * vLayout = new QVBoxLayout(this);
	videoLabel = new QLabel(tr("Camera:"),this);
	vLayout->addWidget(videoLabel);
	vLayout->addWidget(videoComboBox);
	vLayout->addStretch();

	hLayout->addLayout(vLayout);
	setLayout(hLayout);
	resize(QSize(400, 400));

	//cube2dThread = new Cube2dThread(cubeImage,
	//	cubeLabel, (((MainWindow *)parentWidget())->getCubePosition()).rgbs,
	//	faceColors,
	//	FBLRUD, margin, this, painter);
	//cube2dThread->start();
    timer->start(200);
}
示例#29
0
ClientWidget::ClientWidget()
{
	item = NULL;
	photo = new PhotoWidget;
	photo->setFixedSize(200, 250);
	photo->setName("");

	QGridLayout* grid = new QGridLayout;

	int row = 0;

	QLabel* label = new QLabel("Фамилия: ");
	surnameWidget = new QLineEdit;
	grid->addWidget(label, row, 0);
	grid->addWidget(surnameWidget, row++, 1);

	label = new QLabel("Имя: ");
	nameWidget = new QLineEdit;
	nameWidget->setMinimumWidth(300);
	grid->addWidget(label, row, 0);
	grid->addWidget(nameWidget, row++, 1);

	label = new QLabel("Отчество: ");
	patronymicWidget = new QLineEdit;
	grid->addWidget(label, row, 0);
	grid->addWidget(patronymicWidget, row++, 1);

	label = new QLabel("День рождения: ");
	birthdayWidget = new QDateEdit;
	birthdayWidgetEmpty = new QLineEdit;
	birthdayWidget->setCalendarPopup(true);
	birthdayWidget->setDate(MIN_DATE);
	birthdayWidget->setDisplayFormat("dd.MM.yyyy");
	grid->addWidget(label, row, 0);
	grid->addWidget(birthdayWidgetEmpty, row, 1);
	grid->addWidget(birthdayWidget, row++, 1);

	label = new QLabel("Телефон: ");
	phoneWidget = new QLineEdit;
	grid->addWidget(label, row, 0);
	grid->addWidget(phoneWidget, row++, 1);


	cardType = new QComboBox;
	cardType->setModel(ModelFactory::getInstance()->getModel(CARD));

	cardNumberWidget = new QSpinBox;
	cardNumberWidget->setMaximum(1000000);
	cardNumberWidget->setMaximumWidth(120);

	QHBoxLayout* cardBox = new QHBoxLayout;
	cardBox->addWidget(cardNumberWidget);
	cardBox->addWidget(cardType);

	label = new QLabel("Карта: ");
	grid->addWidget(label, row, 0);
	grid->addLayout(cardBox, row++, 1);

	label = new QLabel("email: ");
	emailWidget = new QLineEdit;
	grid->addWidget(label, row, 0);
	grid->addWidget(emailWidget, row++, 1);

	notifyWidget = new QCheckBox("Оповещать по email");
	grid->addWidget(notifyWidget, row++, 1);

	QVBoxLayout* vbox = new QVBoxLayout;
	vbox->addLayout(grid);
	vbox->addStretch(1);

	QHBoxLayout* hbox = new QHBoxLayout;
	hbox->addWidget(photo);
	hbox->addLayout(vbox);
	hbox->addStretch(1);

	setLayout(hbox);

	birthdayWidgetEmpty->setVisible(false);
}
示例#30
0
QWidget *ServerDialog::createAdvancedTab(){
    QVBoxLayout *layout = new QVBoxLayout;

    contest_mode_checkbox = new QCheckBox(tr("Contest mode"));
    contest_mode_checkbox->setChecked(Config.ContestMode);
    contest_mode_checkbox->setToolTip(tr("Requires password to login, hide screen name and disable kicking"));

    free_choose_checkbox = new QCheckBox(tr("Choose generals and cards freely"));
    free_choose_checkbox->setToolTip(tr("This option enables the cheat menu"));
    free_choose_checkbox->setChecked(Config.FreeChoose);

    free_assign_checkbox = new QCheckBox(tr("Assign role and seat freely"));
    free_assign_checkbox->setChecked(Config.value("FreeAssign").toBool());

    free_assign_self_checkbox = new QCheckBox(tr("Assign only your own role"));
    free_assign_self_checkbox->setChecked(Config.FreeAssignSelf);
    free_assign_self_checkbox->setEnabled(free_assign_checkbox->isChecked());
    connect(free_assign_checkbox,SIGNAL(toggled(bool)), free_assign_self_checkbox, SLOT(setEnabled(bool)));

    maxchoice_spinbox = new QSpinBox;
    maxchoice_spinbox->setRange(3, 10);
    maxchoice_spinbox->setValue(Config.value("MaxChoice", 5).toInt());

    forbid_same_ip_checkbox = new QCheckBox(tr("Forbid same IP with multiple connection"));
    forbid_same_ip_checkbox->setChecked(Config.ForbidSIMC);

    disable_chat_checkbox = new QCheckBox(tr("Disable chat"));
    disable_chat_checkbox->setChecked(Config.DisableChat);

    second_general_checkbox = new QCheckBox(tr("Enable second general"));

    nolordskill_checkbox = new QCheckBox(tr("No lord skill"));
    nolordskill_checkbox->setChecked(Config.NoLordSkill);

    scene_checkbox  = new QCheckBox(tr("Enable Scene"));

    scene_checkbox->setChecked(Config.EnableScene);	//changjing

    same_checkbox  = new QCheckBox(tr("Enable Same"));
    same_checkbox->setChecked(Config.EnableSame);

    max_hp_label = new QLabel(tr("Max HP scheme"));
    max_hp_scheme_combobox = new QComboBox;
    max_hp_scheme_combobox->addItem(tr("Sum - 3"));
    max_hp_scheme_combobox->addItem(tr("Minimum"));
    max_hp_scheme_combobox->addItem(tr("Average"));
    max_hp_scheme_combobox->setCurrentIndex(Config.MaxHpScheme);
    second_general_checkbox->setChecked(Config.Enable2ndGeneral);

    basara_checkbox = new QCheckBox(tr("Enable Basara"));
    basara_checkbox->setChecked(Config.EnableBasara);
    updateButtonEnablility(mode_group->checkedButton());
    connect(mode_group,SIGNAL(buttonClicked(QAbstractButton*)),this,SLOT(updateButtonEnablility(QAbstractButton*)));

    hegemony_checkbox = new QCheckBox(tr("Enable Hegemony"));
    hegemony_checkbox->setChecked(Config.EnableHegemony);
    hegemony_checkbox->setEnabled(basara_checkbox->isChecked());
    connect(basara_checkbox,SIGNAL(toggled(bool)),hegemony_checkbox, SLOT(setEnabled(bool)));
    connect(hegemony_checkbox,SIGNAL(toggled(bool)),second_general_checkbox, SLOT(setChecked(bool)));
    connect(hegemony_checkbox,SIGNAL(toggled(bool)),nolordskill_checkbox, SLOT(setChecked(bool)));
    connect(second_general_checkbox,SIGNAL(toggled(bool)), this, SLOT(updateCheckBoxState(bool)));

    announce_ip_checkbox = new QCheckBox(tr("Annouce my IP in WAN"));
    announce_ip_checkbox->setChecked(Config.AnnounceIP);
    announce_ip_checkbox->setEnabled(false); // not support now

    address_edit = new QLineEdit;
    address_edit->setText(Config.Address);

    #if QT_VERSION >= 0x040700
    address_edit->setPlaceholderText(tr("Public IP or domain"));
    #endif

    QPushButton *detect_button = new QPushButton(tr("Detect my WAN IP"));
    connect(detect_button, SIGNAL(clicked()), this, SLOT(onDetectButtonClicked()));

    //address_edit->setEnabled(announce_ip_checkbox->isChecked());
    // connect(announce_ip_checkbox, SIGNAL(toggled(bool)), address_edit, SLOT(setEnabled(bool)));

    port_edit = new QLineEdit;
    port_edit->setText(QString::number(Config.ServerPort));
    port_edit->setValidator(new QIntValidator(1, 9999, port_edit));

    layout->addWidget(contest_mode_checkbox);
    layout->addWidget(forbid_same_ip_checkbox);
    layout->addWidget(disable_chat_checkbox);
    layout->addLayout(HLay(free_choose_checkbox, free_assign_checkbox));
    layout->addWidget(free_assign_self_checkbox);
    layout->addLayout(HLay(new QLabel(tr("Upperlimit for general")), maxchoice_spinbox));
    layout->addLayout(HLay(second_general_checkbox, nolordskill_checkbox));
    layout->addLayout(HLay(max_hp_label, max_hp_scheme_combobox));
    layout->addLayout(HLay(basara_checkbox, hegemony_checkbox));
    layout->addLayout(HLay(scene_checkbox, same_checkbox));
    layout->addWidget(announce_ip_checkbox);
    layout->addLayout(HLay(new QLabel(tr("Address")), address_edit));
    layout->addWidget(detect_button);
    layout->addLayout(HLay(new QLabel(tr("Port")), port_edit));
    layout->addStretch();

    QWidget *widget = new QWidget;
    widget->setLayout(layout);

    max_hp_label->setVisible(Config.Enable2ndGeneral);
    connect(second_general_checkbox, SIGNAL(toggled(bool)), max_hp_label, SLOT(setVisible(bool)));
    max_hp_scheme_combobox->setVisible(Config.Enable2ndGeneral);
    connect(second_general_checkbox, SIGNAL(toggled(bool)), max_hp_scheme_combobox, SLOT(setVisible(bool)));

    return widget;
}