/**
* Loads the font into memory.
*
* @retval true font was already loaded or is loaded now.
* @retval false font could not be loaded.
*/
bool RS_Font::loadFont() {
RS_DEBUG->print("RS_Font::loadFont");
if (loaded) {
return true;
}
QString path;
// Search for the appropriate font if we have only the name of the font:
if (!fileName.toLower().contains(".cxf") &&
!fileName.toLower().contains(".lff")) {
QStringList fonts = RS_SYSTEM->getNewFontList();
#if QT_VERSION < 0x040500
emu_qt45_QList_append(fonts, RS_SYSTEM->getFontList());
#else
fonts.append(RS_SYSTEM->getFontList());
#endif
QFileInfo file;
for (QStringList::Iterator it = fonts.begin();
it!=fonts.end();
it++) {
if (QFileInfo(*it).baseName().toLower()==fileName.toLower()) {
path = *it;
break;
}
}
}
// We have the full path of the font:
else {
path = fileName;
}
// No font paths found:
if (path.isEmpty()) {
RS_DEBUG->print(RS_Debug::D_WARNING,
"RS_Font::loadFont: No fonts available.");
return false;
}
// Open cxf file:
QFile f(path);
if (!f.open(QIODevice::ReadOnly)) {
RS_DEBUG->print(RS_Debug::D_WARNING,
"RS_Font::loadFont: Cannot open font file: %s",
path.toLatin1().data());
return false;
} else {
RS_DEBUG->print("RS_Font::loadFont: "
"Successfully opened font file: %s",
path.toLatin1().data());
}
f.close();
if (path.contains(".cxf"))
readCXF(path);
if (path.contains(".lff"))
readLFF(path);
RS_Block* bk = letterList.find(QChar(0xfffd));
if (!bk) {
// create new letter:
RS_FontChar* letter = new RS_FontChar(nullptr, QChar(0xfffd), RS_Vector(0.0, 0.0));
RS_Polyline* pline = new RS_Polyline(letter, RS_PolylineData());
pline->setPen(RS_Pen(RS2::FlagInvalid));
pline->setLayer(nullptr);
pline->addVertex(RS_Vector(1, 0), 0);
pline->addVertex(RS_Vector(0, 2), 0);
pline->addVertex(RS_Vector(1, 4), 0);
pline->addVertex(RS_Vector(2, 2), 0);
pline->addVertex(RS_Vector(1, 0), 0);
letter->addEntity(pline);
letter->calculateBorders();
letterList.add(letter);
}
loaded = true;
RS_DEBUG->print("RS_Font::loadFont OK");
return true;
}
void RS_Font::readCXF(QString path) {
QString line;
QFile f(path);
f.open(QIODevice::ReadOnly);
QTextStream ts(&f);
// Read line by line until we find a new letter:
while (!ts.atEnd()) {
line = ts.readLine();
if (line.isEmpty())
continue;
// Read font settings:
if (line.at(0)=='#') {
QStringList lst =
( line.right(line.length()-1) ).split(':', QString::SkipEmptyParts);
QStringList::Iterator it3 = lst.begin();
// RVT_PORT sometimes it happens that the size is < 2
if (lst.size()<2)
continue;
QString identifier = (*it3).trimmed();
it3++;
QString value = (*it3).trimmed();
if (identifier.toLower()=="letterspacing") {
letterSpacing = value.toDouble();
} else if (identifier.toLower()=="wordspacing") {
wordSpacing = value.toDouble();
} else if (identifier.toLower()=="linespacingfactor") {
lineSpacingFactor = value.toDouble();
} else if (identifier.toLower()=="author") {
authors.append(value);
} else if (identifier.toLower()=="name") {
names.append(value);
} else if (identifier.toLower()=="encoding") {
ts.setCodec(QTextCodec::codecForName(value.toLatin1()));
encoding = value;
}
}
// Add another letter to this font:
else if (line.at(0)=='[') {
// uniode character:
QChar ch;
// read unicode:
QRegExp regexp("[0-9A-Fa-f]{4,4}");
regexp.indexIn(line);
QString cap = regexp.cap();
if (!cap.isNull()) {
int uCode = cap.toInt(nullptr, 16);
ch = QChar(uCode);
}
// read UTF8 (LibreCAD 1 compatibility)
else if (line.indexOf(']')>=3) {
int i = line.indexOf(']');
QString mid = line.mid(1, i-1);
ch = QString::fromUtf8(mid.toLatin1()).at(0);
}
// read normal ascii character:
else {
ch = line.at(1);
}
// create new letter:
RS_FontChar* letter =
new RS_FontChar(nullptr, ch, RS_Vector(0.0, 0.0));
// Read entities of this letter:
QString coordsStr;
QStringList coords;
QStringList::Iterator it2;
do {
line = ts.readLine();
if (line.isEmpty()) {
continue;
}
coordsStr = line.right(line.length()-2);
// coords = QStringList::split(',', coordsStr);
coords = coordsStr.split(',', QString::SkipEmptyParts);
it2 = coords.begin();
// Line:
if (line.at(0)=='L') {
double x1 = (*it2++).toDouble();
double y1 = (*it2++).toDouble();
double x2 = (*it2++).toDouble();
double y2 = (*it2).toDouble();
RS_Line* line = new RS_Line{letter, {{x1, y1}, {x2, y2}}};
line->setPen(RS_Pen(RS2::FlagInvalid));
line->setLayer(nullptr);
letter->addEntity(line);
}
// Arc:
else if (line.at(0)=='A') {
double cx = (*it2++).toDouble();
double cy = (*it2++).toDouble();
double r = (*it2++).toDouble();
double a1 = RS_Math::deg2rad((*it2++).toDouble());
double a2 = RS_Math::deg2rad((*it2).toDouble());
bool reversed = (line.at(1)=='R');
RS_ArcData ad(RS_Vector(cx,cy),
r, a1, a2, reversed);
RS_Arc* arc = new RS_Arc(letter, ad);
arc->setPen(RS_Pen(RS2::FlagInvalid));
arc->setLayer(nullptr);
letter->addEntity(arc);
}
} while (!line.isEmpty());
if (letter->isEmpty()) {
delete letter;
} else {
letter->calculateBorders();
letterList.add(letter);
}
}
}
f.close();
}
RS_Block* RS_Font::generateLffFont(const QString& ch){
if(rawLffFontList.contains(ch) == false ){
RS_DEBUG->print("RS_Font::generateLffFont(QChar %s ) : can not find the letter in given lff font file",qPrintable(ch));
return nullptr;
}
// create new letter:
RS_FontChar* letter =
new RS_FontChar(nullptr, ch, RS_Vector(0.0, 0.0));
// Read entities of this letter:
QStringList vertex;
QStringList coords;
QStringList fontData=rawLffFontList[ch];
QString line;
while(fontData.isEmpty() == false) {
line = fontData.takeFirst();
if (line.isEmpty()) {
continue;
}
// Defined char:
if (line.at(0)=='C') {
line.remove(0,1);
int uCode = line.toInt(nullptr, 16);
QChar ch = QChar(uCode);
RS_Block* bk = letterList.find(ch);
if (!bk && rawLffFontList.contains(ch)) {
generateLffFont(ch);
bk = letterList.find(ch);
}
if (bk) {
RS_Entity* bk2 = bk->clone();
bk2->setPen(RS_Pen(RS2::FlagInvalid));
bk2->setLayer(nullptr);
letter->addEntity(bk2);
}
}
//sequence:
else {
vertex = line.split(';', QString::SkipEmptyParts);
//at least is required two vertex
if (vertex.size()<2)
continue;
RS_Polyline* pline = new RS_Polyline(letter, RS_PolylineData());
pline->setPen(RS_Pen(RS2::FlagInvalid));
pline->setLayer(nullptr);
for (int i = 0; i < vertex.size(); ++i) {
double x1, y1;
double bulge = 0;
coords = vertex.at(i).split(',', QString::SkipEmptyParts);
//at least X,Y is required
if (coords.size()<2)
continue;
x1 = coords.at(0).toDouble();
y1 = coords.at(1).toDouble();
//check presence of bulge
if (coords.size() == 3 && coords.at(2).at(0) == QChar('A')){
QString bulgeStr = coords.at(2);
bulge = bulgeStr.remove(0,1).toDouble();
}
pline->setNextBulge(bulge);
pline->addVertex(RS_Vector(x1, y1), bulge);
}
letter->addEntity(pline);
}
}
if (letter->isEmpty()) {
delete letter;
return nullptr;
} else {
letter->calculateBorders();
letterList.add(letter);
return letter;
}
}
void RS_Font::readLFF(QString path) {
QString line;
QFile f(path);
encoding = "UTF-8";
f.open(QIODevice::ReadOnly);
QTextStream ts(&f);
// Read line by line until we find a new letter:
while (!ts.atEnd()) {
line = ts.readLine();
if (line.isEmpty())
continue;
// Read font settings:
if (line.at(0)=='#') {
QStringList lst =line.remove(0,1).split(':', QString::SkipEmptyParts);
//if size is < 2 is a comentary not parameter
if (lst.size()<2)
continue;
QString identifier = lst.at(0).trimmed();
QString value = lst.at(1).trimmed();
if (identifier.toLower()=="letterspacing") {
letterSpacing = value.toDouble();
} else if (identifier.toLower()=="wordspacing") {
wordSpacing = value.toDouble();
} else if (identifier.toLower()=="linespacingfactor") {
lineSpacingFactor = value.toDouble();
} else if (identifier.toLower()=="author") {
authors.append(value);
} else if (identifier.toLower()=="name") {
names.append(value);
} else if (identifier.toLower()=="license") {
fileLicense = value;
} else if (identifier.toLower()=="encoding") {
ts.setCodec(QTextCodec::codecForName(value.toLatin1()));
encoding = value;
}
}
// Add another letter to this font:
else if (line.at(0)=='[') {
// uniode character:
QChar ch;
// read unicode:
QRegExp regexp("[0-9A-Fa-f]{4,4}");
regexp.indexIn(line);
QString cap = regexp.cap();
if (!cap.isNull()) {
int uCode = cap.toInt(NULL, 16);
ch = QChar(uCode);
}
// only unicode allowed
else {
continue;
}
// create new letter:
RS_FontChar* letter =
new RS_FontChar(NULL, ch, RS_Vector(0.0, 0.0));
// Read entities of this letter:
QStringList vertex;
QStringList coords;
do {
line = ts.readLine();
if (line.isEmpty()) {
continue;
}
// Defined char:
if (line.at(0)=='C') {
line.remove(0,1);
int uCode = line.toInt(NULL, 16);
QChar ch = QChar(uCode);
RS_Block* bk = letterList.find(ch);
if (bk != NULL) {
RS_Entity* bk2 = bk->clone();
bk2->setPen(RS_Pen(RS2::FlagInvalid));
bk2->setLayer(NULL);
letter->addEntity(bk2);
}
}
//sequence:
else {
vertex = line.split(';', QString::SkipEmptyParts);
//at least is required two vertex
if (vertex.size()<2)
continue;
RS_Polyline* pline = new RS_Polyline(letter, RS_PolylineData());
pline->setPen(RS_Pen(RS2::FlagInvalid));
pline->setLayer(NULL);
for (int i = 0; i < vertex.size(); ++i) {
double x1, y1;
double bulge = 0;
coords = vertex.at(i).split(',', QString::SkipEmptyParts);
//at least X,Y is required
if (coords.size()<2)
continue;
x1 = coords.at(0).toDouble();
y1 = coords.at(1).toDouble();
//check presence of bulge
if (coords.size() == 3 && coords.at(2).at(0) == QChar('A')){
QString bulgeStr = coords.at(2);
bulge = bulgeStr.remove(0,1).toDouble();
pline->setNextBulge(bulge);
}
pline->addVertex(RS_Vector(x1, y1), bulge);
}
letter->addEntity(pline);
}
} while (!line.isEmpty());
letter->calculateBorders();
letterList.add(letter);
}
}
f.close();
}