void
RadialLineOfSightTether::operator()(osg::Node* node, osg::NodeVisitor* nv)
{
if (nv->getVisitorType() == osg::NodeVisitor::UPDATE_VISITOR)
{
RadialLineOfSightNode* los = static_cast<RadialLineOfSightNode*>(node);
osg::Vec3d worldCenter = getNodeCenter( _node );
//Convert center to mappoint since that is what LOS expects
GeoPoint mapCenter;
los->getMapNode()->getMap()->worldPointToMapPoint( worldCenter, mapCenter );
los->setCenter( mapCenter.vec3d() );
}
traverse(node, nv);
}
int
main(int argc, char** argv)
{
osg::ArgumentParser arguments(&argc,argv);
osgViewer::Viewer viewer(arguments);
// load the .earth file from the command line.
osg::Node* earthNode = osgDB::readNodeFiles( arguments );
if (!earthNode)
{
OE_NOTICE << "Unable to load earth model" << std::endl;
return 1;
}
osg::Group* root = new osg::Group();
osgEarth::MapNode * mapNode = osgEarth::MapNode::findMapNode( earthNode );
if (!mapNode)
{
OE_NOTICE << "Could not find MapNode " << std::endl;
return 1;
}
osgEarth::Util::EarthManipulator* manip = new EarthManipulator();
viewer.setCameraManipulator( manip );
root->addChild( earthNode );
viewer.getCamera()->addCullCallback( new AutoClipPlaneCullCallback(mapNode));
//Create a point to point LineOfSightNode.
LinearLineOfSightNode* los = new LinearLineOfSightNode( mapNode, osg::Vec3d(-121.665, 46.0878, 1258.00), osg::Vec3d(-121.488, 46.2054, 3620.11));
root->addChild( los );
los->getOrCreateStateSet()->setMode(GL_DEPTH_TEST, osg::StateAttribute::OFF);
//Create an editor for the point to point line of sight that allows you to drag the beginning and end points around.
//This is just one way that you could manipulator the LineOfSightNode.
LinearLineOfSightEditor* p2peditor = new LinearLineOfSightEditor( los );
root->addChild( p2peditor );
//Create a relative point to point LineOfSightNode.
LinearLineOfSightNode* relativeLOS = new LinearLineOfSightNode( mapNode, osg::Vec3d(-121.2, 46.1, 10), osg::Vec3d(-121.488, 46.2054, 10));
relativeLOS->setStartAltitudeMode( ALTMODE_RELATIVE );
relativeLOS->setEndAltitudeMode( ALTMODE_RELATIVE );
root->addChild( relativeLOS );
relativeLOS->getOrCreateStateSet()->setMode(GL_DEPTH_TEST, osg::StateAttribute::OFF);
LinearLineOfSightEditor* relEditor = new LinearLineOfSightEditor( relativeLOS );
root->addChild( relEditor );
//Create a RadialLineOfSightNode that allows you to do a 360 degree line of sight analysis.
RadialLineOfSightNode* radial = new RadialLineOfSightNode( mapNode );
radial->setCenter( osg::Vec3d(-121.515, 46.054, 847.604) );
radial->setRadius( 2000 );
radial->setNumSpokes(100);
radial->getOrCreateStateSet()->setMode(GL_DEPTH_TEST, osg::StateAttribute::OFF);
root->addChild( radial );
RadialLineOfSightEditor* radialEditor = new RadialLineOfSightEditor( radial );
root->addChild( radialEditor );
//Create a relative RadialLineOfSightNode that allows you to do a 360 degree line of sight analysis.
RadialLineOfSightNode* radialRelative = new RadialLineOfSightNode( mapNode );
radialRelative->setCenter( osg::Vec3d(-121.2, 46.054, 10) );
radialRelative->setAltitudeMode( ALTMODE_RELATIVE );
radialRelative->setRadius( 3000 );
radialRelative->setNumSpokes(60);
radialRelative->getOrCreateStateSet()->setMode(GL_DEPTH_TEST, osg::StateAttribute::OFF);
root->addChild( radialRelative );
RadialLineOfSightEditor* radialRelEditor = new RadialLineOfSightEditor( radialRelative );
root->addChild( radialRelEditor );
//Create an editor for the radial line of sight that allows you to drag it around.
//Load a plane model.
osg::ref_ptr< osg::Node > plane = osgDB::readNodeFile("../data/cessna.osg.5,5,5.scale");
//Create 2 moving planes
osg::Node* plane1 = createPlane(plane, mapNode, osg::Vec3d(-121.656, 46.0935, 4133.06), 5000, 20);
osg::Node* plane2 = createPlane(plane, mapNode, osg::Vec3d(-121.321, 46.2589, 1390.09), 3000, 5);
root->addChild( plane1 );
root->addChild( plane2 );
//Create a LineOfSightNode that will use a LineOfSightTether callback to monitor
//the two plane's positions and recompute the LOS when they move
LinearLineOfSightNode* tetheredLOS = new LinearLineOfSightNode( mapNode);
tetheredLOS->getOrCreateStateSet()->setMode(GL_DEPTH_TEST, osg::StateAttribute::OFF);
root->addChild( tetheredLOS );
tetheredLOS->setUpdateCallback( new LineOfSightTether( plane1, plane2 ) );
//Create another plane and attach a RadialLineOfSightNode to it using the RadialLineOfSightTether
osg::Node* plane3 = createPlane(plane, mapNode, osg::Vec3d( -121.463, 46.3548, 1348.71), 10000, 5);
root->addChild( plane3 );
RadialLineOfSightNode* tetheredRadial = new RadialLineOfSightNode( mapNode );
tetheredRadial->getOrCreateStateSet()->setMode(GL_DEPTH_TEST, osg::StateAttribute::OFF);
tetheredRadial->setRadius( 5000 );
//This RadialLineOfSightNode is going to be filled, so set some alpha values for the colors so it's partially transparent
tetheredRadial->setFill( true );
tetheredRadial->setGoodColor( osg::Vec4(0,1,0,0.3) );
tetheredRadial->setBadColor( osg::Vec4(1,0,0,0.3) );
tetheredRadial->setNumSpokes( 100 );
root->addChild( tetheredRadial );
tetheredRadial->setUpdateCallback( new RadialLineOfSightTether( plane3 ) );
manip->setHomeViewpoint(Viewpoint( "Mt Rainier", osg::Vec3d( -121.488, 46.2054, 0 ), 0.0, -50, 100000 ));
viewer.setSceneData( root );
// add some stock OSG handlers:
viewer.addEventHandler(new osgViewer::StatsHandler());
viewer.addEventHandler(new osgViewer::WindowSizeHandler());
viewer.addEventHandler(new osgViewer::ThreadingHandler());
viewer.addEventHandler(new osgViewer::LODScaleHandler());
viewer.addEventHandler(new osgGA::StateSetManipulator(viewer.getCamera()->getOrCreateStateSet()));
return viewer.run();
}
int
main(int argc, char** argv)
{
osg::ArgumentParser arguments(&argc,argv);
osgViewer::Viewer viewer(arguments);
// load the .earth file from the command line.
osg::Node* earthNode = osgDB::readNodeFiles( arguments );
if (!earthNode)
{
OE_NOTICE << "Unable to load earth model" << std::endl;
return 1;
}
osg::Group* root = new osg::Group();
osgEarth::MapNode * mapNode = osgEarth::MapNode::findMapNode( earthNode );
if (!mapNode)
{
OE_NOTICE << "Could not find MapNode " << std::endl;
return 1;
}
osgEarth::Util::EarthManipulator* manip = new EarthManipulator();
viewer.setCameraManipulator( manip );
root->addChild( earthNode );
//viewer.getCamera()->addCullCallback( new AutoClipPlaneCullCallback(mapNode));
osg::Group* losGroup = new osg::Group();
losGroup->getOrCreateStateSet()->setRenderingHint(osg::StateSet::TRANSPARENT_BIN);
losGroup->getOrCreateStateSet()->setAttributeAndModes(new osg::Depth(osg::Depth::ALWAYS, 0, 1, false));
root->addChild(losGroup);
// so we can speak lat/long:
const SpatialReference* mapSRS = mapNode->getMapSRS();
const SpatialReference* geoSRS = mapSRS->getGeographicSRS();
//Create a point to point LineOfSightNode.
LinearLineOfSightNode* los = new LinearLineOfSightNode(
mapNode,
GeoPoint(geoSRS, -121.665, 46.0878, 1258.00, ALTMODE_ABSOLUTE),
GeoPoint(geoSRS, -121.488, 46.2054, 3620.11, ALTMODE_ABSOLUTE) );
losGroup->addChild( los );
//Create an editor for the point to point line of sight that allows you to drag the beginning and end points around.
//This is just one way that you could manipulator the LineOfSightNode.
LinearLineOfSightEditor* p2peditor = new LinearLineOfSightEditor( los );
root->addChild( p2peditor );
//Create a relative point to point LineOfSightNode.
LinearLineOfSightNode* relativeLOS = new LinearLineOfSightNode(
mapNode,
GeoPoint(geoSRS, -121.2, 46.1, 10, ALTMODE_RELATIVE),
GeoPoint(geoSRS, -121.488, 46.2054, 10, ALTMODE_RELATIVE) );
losGroup->addChild( relativeLOS );
LinearLineOfSightEditor* relEditor = new LinearLineOfSightEditor( relativeLOS );
root->addChild( relEditor );
//Create a RadialLineOfSightNode that allows you to do a 360 degree line of sight analysis.
RadialLineOfSightNode* radial = new RadialLineOfSightNode( mapNode );
radial->setCenter( GeoPoint(geoSRS, -121.515, 46.054, 847.604, ALTMODE_ABSOLUTE) );
radial->setRadius( 2000 );
radial->setNumSpokes( 100 );
losGroup->addChild( radial );
RadialLineOfSightEditor* radialEditor = new RadialLineOfSightEditor( radial );
losGroup->addChild( radialEditor );
//Create a relative RadialLineOfSightNode that allows you to do a 360 degree line of sight analysis.
RadialLineOfSightNode* radialRelative = new RadialLineOfSightNode( mapNode );
radialRelative->setCenter( GeoPoint(geoSRS, -121.2, 46.054, 10, ALTMODE_RELATIVE) );
radialRelative->setRadius( 3000 );
radialRelative->setNumSpokes(60);
losGroup->addChild( radialRelative );
RadialLineOfSightEditor* radialRelEditor = new RadialLineOfSightEditor( radialRelative );
losGroup->addChild( radialRelEditor );
//Load a plane model.
osg::ref_ptr< osg::Node > plane = osgDB::readNodeFile("../data/cessna.osgb.5,5,5.scale");
//Create 2 moving planes
osg::Node* plane1 = createPlane(plane, GeoPoint(geoSRS, -121.656, 46.0935, 4133.06, ALTMODE_ABSOLUTE), mapSRS, 5000, 20);
osg::Node* plane2 = createPlane(plane, GeoPoint(geoSRS, -121.321, 46.2589, 1390.09, ALTMODE_ABSOLUTE), mapSRS, 3000, 5);
root->addChild( plane1 );
root->addChild( plane2 );
//Create a LineOfSightNode that will use a LineOfSightTether callback to monitor
//the two plane's positions and recompute the LOS when they move
LinearLineOfSightNode* tetheredLOS = new LinearLineOfSightNode( mapNode);
losGroup->addChild( tetheredLOS );
tetheredLOS->setUpdateCallback( new LineOfSightTether( plane1, plane2 ) );
//Create another plane and attach a RadialLineOfSightNode to it using the RadialLineOfSightTether
osg::Node* plane3 = createPlane(plane, GeoPoint(geoSRS, -121.463, 46.3548, 1348.71, ALTMODE_ABSOLUTE), mapSRS, 10000, 5);
losGroup->addChild( plane3 );
RadialLineOfSightNode* tetheredRadial = new RadialLineOfSightNode( mapNode );
tetheredRadial->setRadius( 5000 );
//This RadialLineOfSightNode is going to be filled, so set some alpha values for the colors so it's partially transparent
tetheredRadial->setFill( true );
tetheredRadial->setGoodColor( osg::Vec4(0,1,0,0.3) );
tetheredRadial->setBadColor( osg::Vec4(1,0,0,0.3) );
tetheredRadial->setNumSpokes( 100 );
losGroup->addChild( tetheredRadial );
tetheredRadial->setUpdateCallback( new RadialLineOfSightTether( plane3 ) );
osgEarth::Viewpoint vp;
vp.name() = "Mt Ranier";
vp.focalPoint()->set(geoSRS, -121.488, 46.2054, 0, ALTMODE_ABSOLUTE);
vp.pitch() = -50.0;
vp.range() = 100000;
manip->setHomeViewpoint( vp );
viewer.setSceneData( root );
// add some stock OSG handlers:
viewer.addEventHandler(new osgViewer::StatsHandler());
viewer.addEventHandler(new osgViewer::WindowSizeHandler());
viewer.addEventHandler(new osgViewer::ThreadingHandler());
viewer.addEventHandler(new osgViewer::LODScaleHandler());
viewer.addEventHandler(new osgGA::StateSetManipulator(viewer.getCamera()->getOrCreateStateSet()));
return viewer.run();
}
