示例#1
0
void
ClonedBlockObject::put(JSContext *cx)
{
    StackFrame *fp = cx->fp();
    JS_ASSERT(maybeStackFrame() == js_FloatingFrameIfGenerator(cx, fp));

    uint32_t count = slotCount();
    uint32_t depth = stackDepth();

    /* The block and its locals must be on the current stack for GC safety. */
    JS_ASSERT(depth <= uint32_t(cx->regs().sp - fp->base()));
    JS_ASSERT(count <= uint32_t(cx->regs().sp - fp->base() - depth));

    /* See comments in CheckDestructuring in frontend/Parser.cpp. */
    JS_ASSERT(count >= 1);

    copySlotRange(RESERVED_SLOTS, fp->base() + depth, count);

    /* We must clear the private slot even with errors. */
    setPrivate(NULL);
    fp->setScopeChainNoCallObj(enclosingScope());
}
示例#2
0
static uint32
ConvertFrames(JSContext *cx, IonActivation *activation, IonBailoutIterator &it)
{
    AssertCanGC();
    IonSpew(IonSpew_Bailouts, "Bailing out %s:%u, IonScript %p",
            it.script()->filename, it.script()->lineno, (void *) it.ionScript());
    IonSpew(IonSpew_Bailouts, " reading from snapshot offset %u size %u",
            it.snapshotOffset(), it.ionScript()->snapshotsSize());
#ifdef DEBUG
    // Use count is reset after invalidation. Log use count on bailouts to
    // determine if we have a critical sequence of bailout.
    if (it.script()->ion == it.ionScript()) {
        IonSpew(IonSpew_Bailouts, " Current script use count is %u",
                it.script()->getUseCount());
    }
#endif

    SnapshotIterator iter(it);

    // Set a flag to avoid bailing out on every iteration or function call. Ion can
    // compile and run the script again after an invalidation.
    it.ionScript()->setBailoutExpected();

    // We use OffTheBooks instead of cx because at this time we cannot iterate
    // on the stack safely and the reported error attempts to walk the IonMonkey
    // frames. We cannot iterate on the stack because we have no exit frame to
    // start Ion frames iteratons.
    BailoutClosure *br = js_new<BailoutClosure>();
    if (!br)
        return BAILOUT_RETURN_FATAL_ERROR;
    activation->setBailout(br);

    StackFrame *fp;
    if (it.isEntryJSFrame() && cx->fp()->runningInIon() && activation->entryfp()) {
        // Avoid creating duplicate interpreter frames. This is necessary to
        // avoid blowing out the interpreter stack, and must be used in
        // conjunction with inline-OSR from within bailouts (since each Ion
        // activation must be tied to a unique JSStackFrame for StackIter to
        // work).
        //
        // Note: If the entry frame is a placeholder (a stub frame pushed for
        // JM -> Ion calls), then we cannot re-use it as it does not have
        // enough slots.
        JS_ASSERT(cx->fp() == activation->entryfp());
        fp = cx->fp();
        cx->regs().sp = fp->base();
    } else {
        br->constructFrame();
        if (!cx->stack.pushBailoutArgs(cx, it, br->argsGuard()))
            return BAILOUT_RETURN_FATAL_ERROR;

        fp = cx->stack.pushBailoutFrame(cx, it, *br->argsGuard(), br->frameGuard());
    }

    if (!fp)
        return BAILOUT_RETURN_OVERRECURSED;

    br->setEntryFrame(fp);

    JSFunction *callee = it.maybeCallee();
    if (callee)
        fp->formals()[-2].setObject(*callee);

    if (it.isConstructing())
        fp->setConstructing();

    while (true) {
        IonSpew(IonSpew_Bailouts, " restoring frame");
        fp->initFromBailout(cx, iter);

        if (!iter.moreFrames())
             break;
        iter.nextFrame();

        fp = PushInlinedFrame(cx, fp);
        if (!fp)
            return BAILOUT_RETURN_OVERRECURSED;
    }

    jsbytecode *bailoutPc = fp->script()->code + iter.pcOffset();
    br->setBailoutPc(bailoutPc);

    switch (iter.bailoutKind()) {
      case Bailout_Normal:
        return BAILOUT_RETURN_OK;
      case Bailout_TypeBarrier:
        return BAILOUT_RETURN_TYPE_BARRIER;
      case Bailout_Monitor:
        return BAILOUT_RETURN_MONITOR;
      case Bailout_RecompileCheck:
        return BAILOUT_RETURN_RECOMPILE_CHECK;
      case Bailout_BoundsCheck:
        return BAILOUT_RETURN_BOUNDS_CHECK;
      case Bailout_Invalidate:
        return BAILOUT_RETURN_INVALIDATE;
      case Bailout_CachedShapeGuard:
        return BAILOUT_RETURN_CACHED_SHAPE_GUARD;

      // When bailing out from an argument check, none of the code of the
      // function has run yet. When profiling, this means that the function
      // hasn't flagged its entry just yet. It has been "entered," however, so
      // we flag it here manually that the entry has happened.
      case Bailout_ArgumentCheck:
        fp->unsetPushedSPSFrame();
        Probes::enterScript(cx, fp->script().unsafeGet(), fp->script()->function(), fp);
        return BAILOUT_RETURN_ARGUMENT_CHECK;
    }

    JS_NOT_REACHED("bad bailout kind");
    return BAILOUT_RETURN_FATAL_ERROR;
}
示例#3
0
static jsbytecode *
FindExceptionHandler(JSContext *cx)
{
    StackFrame *fp = cx->fp();
    JSScript *script = fp->script();

    if (!script->hasTrynotes())
        return NULL;

  error:
    if (cx->isExceptionPending()) {
        for (TryNoteIter tni(cx->regs()); !tni.done(); ++tni) {
            JSTryNote *tn = *tni;

            UnwindScope(cx, tn->stackDepth);

            /*
             * Set pc to the first bytecode after the the try note to point
             * to the beginning of catch or finally or to [enditer] closing
             * the for-in loop.
             */
            jsbytecode *pc = script->main() + tn->start + tn->length;
            cx->regs().pc = pc;
            cx->regs().sp = fp->base() + tn->stackDepth;

            switch (tn->kind) {
                case JSTRY_CATCH:
                  JS_ASSERT(JSOp(*pc) == JSOP_ENTERBLOCK);

#if JS_HAS_GENERATORS
                  /* Catch cannot intercept the closing of a generator. */
                  if (JS_UNLIKELY(cx->getPendingException().isMagic(JS_GENERATOR_CLOSING)))
                      break;
#endif

                  /*
                   * Don't clear cx->throwing to save cx->exception from GC
                   * until it is pushed to the stack via [exception] in the
                   * catch block.
                   */
                  return pc;

                case JSTRY_FINALLY:
                  /*
                   * Push (true, exception) pair for finally to indicate that
                   * [retsub] should rethrow the exception.
                   */
                  cx->regs().sp[0].setBoolean(true);
                  cx->regs().sp[1] = cx->getPendingException();
                  cx->regs().sp += 2;
                  cx->clearPendingException();
                  return pc;

                case JSTRY_ITER:
                {
                  /*
                   * This is similar to JSOP_ENDITER in the interpreter loop,
                   * except the code now uses the stack slot normally used by
                   * JSOP_NEXTITER, namely regs.sp[-1] before the regs.sp -= 2
                   * adjustment and regs.sp[1] after, to save and restore the
                   * pending exception.
                   */
                  JS_ASSERT(JSOp(*pc) == JSOP_ENDITER);
                  bool ok = UnwindIteratorForException(cx, &cx->regs().sp[-1].toObject());
                  cx->regs().sp -= 1;
                  if (!ok)
                      goto error;
                }
            }
        }
    } else {
        UnwindForUncatchableException(cx, cx->regs());
    }

    return NULL;
}
示例#4
0
static jsbytecode *
FindExceptionHandler(JSContext *cx)
{
    StackFrame *fp = cx->fp();
    JSScript *script = fp->script();

top:
    if (cx->isExceptionPending() && JSScript::isValidOffset(script->trynotesOffset)) {
        // The PC is updated before every stub call, so we can use it here.
        unsigned offset = cx->regs().pc - script->main();

        JSTryNoteArray *tnarray = script->trynotes();
        for (unsigned i = 0; i < tnarray->length; ++i) {
            JSTryNote *tn = &tnarray->vector[i];

            // The following if condition actually tests two separate conditions:
            //   (1) offset - tn->start >= tn->length
            //       means the PC is not in the range of this try note, so we
            //       should continue searching, after considering:
            //   (2) offset - tn->start == tn->length
            //       means the PC is at the first op of the exception handler
            //       for this try note. This happens when an exception is thrown
            //       during recording: the interpreter sets the PC to the handler
            //       and then exits. In this case, we are in fact at the right
            //       exception handler. 
            //      
            //       Hypothetically, the op we are at might have thrown an
            //       exception, in which case this would not be the right handler.
            //       But the first ops of exception handlers generated by our
            //       bytecode compiler cannot throw, so this is not possible.
            if (offset - tn->start > tn->length)
                continue;
            if (tn->stackDepth > cx->regs().sp - fp->base())
                continue;

            UnwindScope(cx, tn->stackDepth);

            jsbytecode *pc = script->main() + tn->start + tn->length;
            cx->regs().pc = pc;
            cx->regs().sp = fp->base() + tn->stackDepth;

            switch (tn->kind) {
                case JSTRY_CATCH:
                  JS_ASSERT(JSOp(*pc) == JSOP_ENTERBLOCK);

#if JS_HAS_GENERATORS
                  /* Catch cannot intercept the closing of a generator. */
                  if (JS_UNLIKELY(cx->getPendingException().isMagic(JS_GENERATOR_CLOSING)))
                      break;
#endif

                  /*
                   * Don't clear cx->throwing to save cx->exception from GC
                   * until it is pushed to the stack via [exception] in the
                   * catch block.
                   */
                  return pc;

                case JSTRY_FINALLY:
                  /*
                   * Push (true, exception) pair for finally to indicate that
                   * [retsub] should rethrow the exception.
                   */
                  cx->regs().sp[0].setBoolean(true);
                  cx->regs().sp[1] = cx->getPendingException();
                  cx->regs().sp += 2;
                  cx->clearPendingException();
                  return pc;

                case JSTRY_ITER:
                {
                  /*
                   * This is similar to JSOP_ENDITER in the interpreter loop,
                   * except the code now uses the stack slot normally used by
                   * JSOP_NEXTITER, namely regs.sp[-1] before the regs.sp -= 2
                   * adjustment and regs.sp[1] after, to save and restore the
                   * pending exception.
                   */
                  Value v = cx->getPendingException();
                  JS_ASSERT(JSOp(*pc) == JSOP_ENDITER);
                  cx->clearPendingException();
                  bool ok = !!js_CloseIterator(cx, &cx->regs().sp[-1].toObject());
                  cx->regs().sp -= 1;
                  if (!ok)
                      goto top;
                  cx->setPendingException(v);
                }
            }
        }
    }

    return NULL;
}
示例#5
0
extern "C" void *
js_InternalThrow(VMFrame &f)
{
    JSContext *cx = f.cx;

    ExpandInlineFrames(cx->compartment);

    // The current frame may have an associated orphaned native, if the native
    // or SplatApplyArgs threw an exception.
    RemoveOrphanedNative(cx, f.fp());

    JS_ASSERT(!f.fp()->finishedInInterpreter());

    // Make sure sp is up to date.
    JS_ASSERT(&cx->regs() == &f.regs);

    jsbytecode *pc = NULL;
    for (;;) {
        if (cx->isExceptionPending()) {
            // Call the throw hook if necessary
            JSThrowHook handler = cx->debugHooks->throwHook;
            if (handler || !cx->compartment->getDebuggees().empty()) {
                Value rval;
                JSTrapStatus st = Debugger::onExceptionUnwind(cx, &rval);
                if (st == JSTRAP_CONTINUE && handler) {
                    st = handler(cx, cx->fp()->script(), cx->regs().pc, &rval,
                                 cx->debugHooks->throwHookData);
                }

                switch (st) {
                case JSTRAP_ERROR:
                    cx->clearPendingException();
                    return NULL;

                case JSTRAP_CONTINUE:
                  break;

                case JSTRAP_RETURN:
                    cx->clearPendingException();
                    cx->fp()->setReturnValue(rval);
                    return cx->jaegerCompartment()->forceReturnFromExternC();

                case JSTRAP_THROW:
                    cx->setPendingException(rval);
                    break;

                default:
                    JS_NOT_REACHED("bad onExceptionUnwind status");
                }
            }
        }

        pc = FindExceptionHandler(cx);
        if (pc)
            break;

        // The JIT guarantees that ScriptEpilogue() has always been run
        // upon exiting to its caller. This is important for consistency,
        // where execution modes make similar guarantees about prologues
        // and epilogues. RunTracer(), Interpret(), and Invoke() all
        // rely on this property.
        JS_ASSERT(!f.fp()->finishedInInterpreter());
        UnwindScope(cx, 0);
        f.regs.sp = f.fp()->base();

        if (cx->compartment->debugMode())
            js::ScriptDebugEpilogue(cx, f.fp(), false);

        ScriptEpilogue(f.cx, f.fp(), false);

        // Don't remove the last frame, this is the responsibility of
        // JaegerShot()'s caller. We only guarantee that ScriptEpilogue()
        // has been run.
        if (f.entryfp == f.fp())
            break;

        JS_ASSERT(f.regs.sp == cx->regs().sp);
        InlineReturn(f);
    }

    JS_ASSERT(f.regs.sp == cx->regs().sp);

    if (!pc)
        return NULL;

    StackFrame *fp = cx->fp();
    JSScript *script = fp->script();

    /*
     * Fall back to EnterMethodJIT and finish the frame in the interpreter.
     * With type inference enabled, we may wipe out all JIT code on the
     * stack without patching ncode values to jump to the interpreter, and
     * thus can only enter JIT code via EnterMethodJIT (which overwrites
     * its entry frame's ncode). See ClearAllFrames.
     */
    cx->compartment->jaegerCompartment()->setLastUnfinished(Jaeger_Unfinished);

    if (!script->ensureRanAnalysis(cx, NULL)) {
        js_ReportOutOfMemory(cx);
        return NULL;
    }

    analyze::AutoEnterAnalysis enter(cx);

    cx->regs().pc = pc;
    cx->regs().sp = fp->base() + script->analysis()->getCode(pc).stackDepth;

    /*
     * Interpret the ENTERBLOCK and EXCEPTION opcodes, so that we don't go
     * back into the interpreter with a pending exception. This will cause
     * it to immediately rethrow.
     */
    if (cx->isExceptionPending()) {
        JS_ASSERT(JSOp(*pc) == JSOP_ENTERBLOCK);
        StaticBlockObject &blockObj = script->getObject(GET_SLOTNO(pc))->asStaticBlock();
        Value *vp = cx->regs().sp + blockObj.slotCount();
        SetValueRangeToUndefined(cx->regs().sp, vp);
        cx->regs().sp = vp;
        JS_ASSERT(JSOp(pc[JSOP_ENTERBLOCK_LENGTH]) == JSOP_EXCEPTION);
        cx->regs().sp[0] = cx->getPendingException();
        cx->clearPendingException();
        cx->regs().sp++;
        cx->regs().pc = pc + JSOP_ENTERBLOCK_LENGTH + JSOP_EXCEPTION_LENGTH;
        cx->regs().fp()->setBlockChain(&blockObj);
    }

    *f.oldregs = f.regs;

    return NULL;
}