示例#1
0
文件: Moose.C 项目: adamLange/moose
void
addActionTypes(Syntax & syntax)
{
  /**
   * The second param here indicates whether the task must be satisfied or not for a successful run.
   * If set to true, then the ActionWarehouse will attempt to create "Action"s automatically if they have
   * not been explicitly created by the parser or some other mechanism.
   *
   * Note: Many of the actions in the "Minimal Problem" section are marked as false.  However, we can generally
   * force creation of these "Action"s as needed by registering them to syntax that we expect to see even
   * if those "Action"s  don't normally pick up parameters from the input file.
   */

  /**************************/
  /**** Register Actions ****/
  /**************************/
  registerMooseObjectTask("create_problem",               Problem,                 true);
  registerMooseObjectTask("setup_executioner",            Executioner,             true);

  // This task does not construct an object, but it needs all of the parameters that
  // would normally be used to construct an object.
  registerMooseObjectTask("determine_system_type",        Executioner,             true);

  registerMooseObjectTask("setup_mesh",                   MooseMesh,              false);
  registerMooseObjectTask("add_mesh_modifier",            MeshModifier,           false);

  registerMooseObjectTask("add_kernel",                   Kernel,                 false);
  appendMooseObjectTask  ("add_kernel",                   EigenKernel);

  registerMooseObjectTask("add_material",                 Material,               false);
  registerMooseObjectTask("add_bc",                       BoundaryCondition,      false);
  registerMooseObjectTask("add_function",                 Function,               false);

  registerMooseObjectTask("add_aux_kernel",               AuxKernel,              false);
  registerMooseObjectTask("add_elemental_field_variable", AuxKernel,              false);

  registerMooseObjectTask("add_scalar_kernel",            ScalarKernel,           false);
  registerMooseObjectTask("add_aux_scalar_kernel",        AuxScalarKernel,        false);
  registerMooseObjectTask("add_dirac_kernel",             DiracKernel,            false);
  registerMooseObjectTask("add_dg_kernel",                DGKernel,               false);
  registerMooseObjectTask("add_constraint",               Constraint,             false);

  registerMooseObjectTask("add_ic",                       InitialCondition,       false);
  appendMooseObjectTask  ("add_ic",                       ScalarInitialCondition);

  registerMooseObjectTask("add_damper",                   Damper,                 false);
  registerMooseObjectTask("setup_predictor",              Predictor,              false);
  registerMooseObjectTask("setup_time_stepper",           TimeStepper,            false);
  registerMooseObjectTask("setup_time_integrator",        TimeIntegrator,         false);

  registerMooseObjectTask("add_preconditioning",          MoosePreconditioner,    false);
  registerMooseObjectTask("add_split",                    Split,                  false);

  registerMooseObjectTask("add_user_object",              UserObject,             false);
  appendMooseObjectTask  ("add_user_object",              Postprocessor);

  registerMooseObjectTask("add_postprocessor",            Postprocessor,          false);
  registerMooseObjectTask("add_vector_postprocessor",     VectorPostprocessor,    false);

  registerMooseObjectTask("add_indicator",                Indicator,              false);
  registerMooseObjectTask("add_marker",                   Marker,                 false);

  registerMooseObjectTask("add_multi_app",                MultiApp,               false);
  registerMooseObjectTask("add_transfer",                 Transfer,               false);

  registerMooseObjectTask("add_output",                   Output,                 false);

  registerMooseObjectTask("add_control",                  Control,                false);

  registerTask("dynamic_object_registration", false);
  registerTask("common_output", true);
  registerTask("setup_recover_file_base", true);

  registerTask("add_bounds_vectors", false);
  registerTask("add_periodic_bc", false);
  registerTask("add_aux_variable", false);
  registerTask("add_variable", false);

  registerTask("execute_mesh_modifiers", false);
  registerTask("uniform_refine_mesh", false);
  registerTask("prepare_mesh", false);
  registerTask("setup_mesh_complete", false);  // calls prepare

  registerTask("init_displaced_problem", false);

  registerTask("init_problem", true);
  registerTask("check_copy_nodal_vars", true);
  registerTask("copy_nodal_vars", true);
  registerTask("copy_nodal_aux_vars", true);
  registerTask("setup_postprocessor_data", false);

  registerTask("setup_dampers", true);
  registerTask("check_integrity", true);
  registerTask("setup_quadrature", true);

  /// Additional Actions
  registerTask("no_action", false);  // Used for Empty Action placeholders
  registerTask("set_global_params", false);
  registerTask("setup_time_periods", true);
  registerTask("setup_adaptivity", false);
  registerTask("meta_action", false);
  registerTask("setup_debug", false);
  registerTask("setup_residual_debug", false);
  registerTask("setup_oversampling", false);
  registerTask("deprecated_block", false);
  registerTask("set_adaptivity_options", false);
  registerTask("add_mortar_interface", false);

  // Dummy Actions (useful for sync points in the dependencies)
  registerTask("setup_function_complete", false);
  registerTask("setup_variable_complete", false);
  registerTask("ready_to_init", true);

  // Output related actions
  registerTask("setup_material_output", true);
  registerTask("check_output", true);

  /**************************/
  /****** Dependencies ******/
  /**************************/
  /**
   * The following is the default set of action dependencies for a basic MOOSE problem.  The formatting
   * of this string is important.  Each line represents a set of dependencies that depend on the previous
   * line.  Items on the same line have equal weight and can be executed in any order.
   *
   * Additional dependencies can be inserted later inside of user applications with calls to
   * ActionWarehouse::addDependency("task", "pre_req")
   */
  syntax.addDependencySets(
"(meta_action)"
"(dynamic_object_registration)"
"(common_output)"
"(set_global_params)"
"(setup_recover_file_base)"
"(check_copy_nodal_vars)"
"(setup_mesh)"
"(prepare_mesh)"
"(add_mesh_modifier)"
"(add_mortar_interface)"
"(execute_mesh_modifiers)"
"(uniform_refine_mesh)"
"(setup_mesh_complete)"
"(determine_system_type)"
"(create_problem)"
"(setup_time_integrator)"
"(setup_executioner)"
"(setup_time_stepper)"
"(setup_predictor)"
"(setup_postprocessor_data)"
"(setup_time_periods)"
"(init_displaced_problem)"
"(add_aux_variable, add_variable, add_elemental_field_variable)"
"(setup_variable_complete)"
"(setup_quadrature)"
"(add_function)"
"(add_periodic_bc)"
"(add_user_object)"
"(setup_function_complete)"
"(setup_adaptivity)"
"(set_adaptivity_options)"
"(add_ic)"
"(add_preconditioning, add_constraint, add_split)"
"(ready_to_init)"
"(setup_dampers)"
"(setup_residual_debug)"
"(add_bounds_vectors)"
"(add_multi_app)"
"(add_transfer)"
"(copy_nodal_vars, copy_nodal_aux_vars)"
"(add_material)"
"(setup_material_output)"
"(init_problem)"
"(setup_debug)"
"(add_output)"
"(add_postprocessor)"
"(add_vector_postprocessor)"
"(add_aux_kernel, add_bc, add_damper, add_dirac_kernel, add_kernel, add_dg_kernel, add_scalar_kernel, add_aux_scalar_kernel, add_indicator, add_marker)"
"(add_control)"
"(check_output)"
"(check_integrity)"
);

}
示例#2
0
文件: Moose.C 项目: FHilty/moose
void
addActionTypes(Syntax & syntax)
{
  /**
   * The (optional) last param here indicates whether the task should trigger an Action auto-build.
   * If a task is marked as "true". Then MOOSE will attempt to build the associated Action if one is
   * not supplied by some other means (usually through the input file or custom Action). Only
   * Actions that do not have required parameters and have defaults for all optional parameters can
   * be built automatically (See ActionWarehouse.C).
   *
   * Note: Many of the actions in the "Minimal Problem" section are marked as false.  However, we
   * can generally force creation of these "Action"s as needed by registering them to syntax that we
   * expect to see even if those "Action"s  don't normally pick up parameters from the input file.
   */

  // clang-format off
  /**************************/
  /**** Register Actions ****/
  /**************************/
  registerMooseObjectTask("create_problem",               Problem,                false);
  registerMooseObjectTask("setup_executioner",            Executioner,            false);

  // This task does not construct an object, but it needs all of the parameters that
  // would normally be used to construct an object.
  registerMooseObjectTask("determine_system_type",        Executioner,            true);

  registerMooseObjectTask("setup_mesh",                   MooseMesh,              false);
  registerMooseObjectTask("init_mesh",                    MooseMesh,              false);
  registerMooseObjectTask("add_mesh_modifier",            MeshModifier,           false);

  registerMooseObjectTask("add_kernel",                   Kernel,                 false);
  appendMooseObjectTask  ("add_kernel",                   EigenKernel);
  appendMooseObjectTask  ("add_kernel",                   VectorKernel);

  registerMooseObjectTask("add_nodal_kernel",             NodalKernel,            false);

  registerMooseObjectTask("add_material",                 Material,               false);
  registerMooseObjectTask("add_bc",                       BoundaryCondition,      false);
  registerMooseObjectTask("add_function",                 Function,               false);
  registerMooseObjectTask("add_distribution",             Distribution,           false);
  registerMooseObjectTask("add_sampler",                  Sampler,                false);

  registerMooseObjectTask("add_aux_kernel",               AuxKernel,              false);
  registerMooseObjectTask("add_elemental_field_variable", AuxKernel,              false);

  registerMooseObjectTask("add_scalar_kernel",            ScalarKernel,           false);
  registerMooseObjectTask("add_aux_scalar_kernel",        AuxScalarKernel,        false);
  registerMooseObjectTask("add_dirac_kernel",             DiracKernel,            false);
  registerMooseObjectTask("add_dg_kernel",                DGKernel,               false);
  registerMooseObjectTask("add_interface_kernel",         InterfaceKernel,        false);
  registerMooseObjectTask("add_constraint",               Constraint,             false);

  registerMooseObjectTask("add_ic",                       InitialCondition,       false);
  appendMooseObjectTask  ("add_ic",                       ScalarInitialCondition);

  registerMooseObjectTask("add_damper",                   Damper,                 false);
  registerMooseObjectTask("setup_predictor",              Predictor,              false);
  registerMooseObjectTask("setup_time_stepper",           TimeStepper,            false);
  registerMooseObjectTask("setup_time_integrator",        TimeIntegrator,         false);

  registerMooseObjectTask("add_preconditioning",          MoosePreconditioner,    false);
  registerMooseObjectTask("add_field_split",              Split,                  false);

  registerMooseObjectTask("add_user_object",              UserObject,             false);
  appendMooseObjectTask  ("add_user_object",              Postprocessor);

  registerMooseObjectTask("add_postprocessor",            Postprocessor,          false);
  registerMooseObjectTask("add_vector_postprocessor",     VectorPostprocessor,    false);

  registerMooseObjectTask("add_indicator",                Indicator,              false);
  registerMooseObjectTask("add_marker",                   Marker,                 false);

  registerMooseObjectTask("add_multi_app",                MultiApp,               false);
  registerMooseObjectTask("add_transfer",                 Transfer,               false);

  registerMooseObjectTask("add_output",                   Output,                 false);

  registerMooseObjectTask("add_control",                  Control,                false);
  registerMooseObjectTask("add_partitioner",              MoosePartitioner,       false);

  // clang-format on

  registerTask("dynamic_object_registration", false);
  registerTask("common_output", true);
  registerTask("setup_recover_file_base", true);

  registerTask("add_bounds_vectors", false);
  registerTask("add_periodic_bc", false);
  registerTask("add_aux_variable", false);
  registerTask("add_external_aux_variables", true);
  registerTask("add_variable", false);

  registerTask("execute_mesh_modifiers", false);
  registerTask("uniform_refine_mesh", false);
  registerTask("prepare_mesh", false);
  registerTask("add_geometric_rm", true);
  registerTask("setup_mesh_complete", false); // calls prepare

  registerTask("init_displaced_problem", false);

  registerTask("add_algebraic_rm", true);
  registerTask("init_problem", true);
  registerTask("check_copy_nodal_vars", true);
  registerTask("copy_nodal_vars", true);
  registerTask("copy_nodal_aux_vars", true);
  registerTask("setup_postprocessor_data", false);

  registerTask("setup_dampers", true);
  registerTask("check_integrity", true);
  registerTask("check_integrity_early", true);
  registerTask("setup_quadrature", true);

  /// Additional Actions
  registerTask("no_action", false); // Used for Empty Action placeholders
  registerTask("set_global_params", false);
  registerTask("setup_adaptivity", false);
  registerTask("meta_action", false);
  registerTask("setup_debug", false);
  registerTask("setup_residual_debug", false);
  registerTask("setup_oversampling", false);
  registerTask("deprecated_block", false);
  registerTask("set_adaptivity_options", false);
  registerTask("add_mortar_interface", false);

  // Dummy Actions (useful for sync points in the dependencies)
  registerTask("setup_function_complete", false);
  registerTask("setup_variable_complete", false);
  registerTask("ready_to_init", true);

  // Output related actions
  registerTask("setup_material_output", true);
  registerTask("check_output", true);

  /**************************/
  /****** Dependencies ******/
  /**************************/
  /**
   * The following is the default set of action dependencies for a basic MOOSE problem.  The
   * formatting of this string is important.  Each line represents a set of dependencies that depend
   * on the previous line.  Items on the same line have equal weight and can be executed in any
   * order.
   *
   * Additional dependencies can be inserted later inside of user applications with calls to
   * ActionWarehouse::addDependency("task", "pre_req")
   */
  syntax.addDependencySets("(meta_action)"
                           "(dynamic_object_registration)"
                           "(common_output)"
                           "(set_global_params)"
                           "(setup_recover_file_base)"
                           "(check_copy_nodal_vars)"
                           "(setup_mesh)"
                           "(add_partitioner)"
                           "(add_geometric_rm)"
                           "(init_mesh)"
                           "(prepare_mesh)"
                           "(add_mesh_modifier)"
                           "(execute_mesh_modifiers)"
                           "(add_mortar_interface)"
                           "(uniform_refine_mesh)"
                           "(setup_mesh_complete)"
                           "(determine_system_type)"
                           "(create_problem)"
                           "(setup_postprocessor_data)"
                           "(setup_time_integrator)"
                           "(setup_executioner)"
                           "(check_integrity_early)"
                           "(setup_predictor)"
                           "(init_displaced_problem)"
                           "(add_aux_variable, add_variable, add_elemental_field_variable,"
                           " add_external_aux_variables)"
                           "(setup_variable_complete)"
                           "(setup_quadrature)"
                           "(add_function)"
                           "(add_distribution)"
                           "(add_sampler)"
                           "(add_periodic_bc)"
                           "(add_user_object)"
                           "(setup_function_complete)"
                           "(setup_adaptivity)"
                           "(set_adaptivity_options)"
                           "(add_ic)"
                           "(add_constraint, add_field_split)"
                           "(add_preconditioning)"
                           "(setup_time_stepper)"
                           "(ready_to_init)"
                           "(setup_dampers)"
                           "(setup_residual_debug)"
                           "(add_bounds_vectors)"
                           "(add_multi_app)"
                           "(add_transfer)"
                           "(copy_nodal_vars, copy_nodal_aux_vars)"
                           "(add_material)"
                           "(setup_material_output)"
                           "(add_algebraic_rm)"
                           "(init_problem)"
                           "(setup_debug)"
                           "(add_output)"
                           "(add_postprocessor)"
                           "(add_vector_postprocessor)" // MaterialVectorPostprocessor requires this
                                                        // to be after material objects are created.
                           "(add_aux_kernel, add_bc, add_damper, add_dirac_kernel, add_kernel,"
                           " add_nodal_kernel, add_dg_kernel, add_interface_kernel,"
                           " add_scalar_kernel, add_aux_scalar_kernel, add_indicator, add_marker)"
                           "(add_control)"
                           "(check_output)"
                           "(check_integrity)");
}