void TPZAnalysisError::ExpandConnected(TPZStack<TPZCompElSide> &singel){
int64_t nelem = singel.NElements();
TPZStack<TPZGeoElSide> gelstack;
TPZStack<TPZCompElSide> celstack;
int64_t iel;
for(iel=0; iel<nelem; iel++) {
TPZCompElSide celside = singel[iel];
TPZGeoElSide gelside;
gelside = celside.Reference();
if(!gelside.Exists()) continue;
gelstack.Resize(0);
cout << "This part needs to be fixed\n";
// gelside.Element()->LowerDimensionSides(gelside.Side(),gelstack);
while(gelstack.NElements()) {
TPZGeoElSide gelsideloc;
gelsideloc = gelstack.Pop();
gelsideloc.EqualLevelCompElementList(celstack,1,0);
while(celstack.NElements()) {
TPZCompElSide celsideloc = celstack.Pop();
if(! celsideloc.Exists()) continue;
int64_t nelsing = singel.NElements();
int64_t smel;
for(smel=0; smel<nelsing; smel++) if(singel[smel].Element() == celsideloc.Element()) break;
if(smel != nelsing) singel.Push(celsideloc);
}
}
}
}
// IT IS BAD !!!! IMPROVE IT !!!
void TPZGeoCloneMesh::AddBoundaryConditionElements(TPZGeoEl *eltoadd) {
int nsides = eltoadd->NSides();
int is;
for(is=0; is<nsides; is++) {
TPZGeoElSide elside(eltoadd,is);
TPZGeoElSide neighbour = elside.Neighbour();
#ifdef PZDEBUG
if (!neighbour.Element()) DebugStop();
#endif
while(neighbour != elside) {
if(neighbour.Element()->Dimension() < eltoadd->Dimension() &&
neighbour.Side() == neighbour.Element()->NSides() - 1
// && neighbour.Element()->Reference()
) {
TPZGeoEl *gel = neighbour.Element();
if (HasElement(gel)) {
neighbour = neighbour.Neighbour();
continue;
}
TPZGeoEl *father = gel->Father();
while(father) {
gel = father;
father = gel->Father();
}
CloneElement(gel);
// verificar se neighbour.Element ja esta no map
// TPZGeoEl *localpatch = fMapElements[neighbour.Element()];
TPZGeoEl *localpatch = fMapElements[gel]; // Jorge 2013/03/28
fPatchElements.insert(localpatch);
}
neighbour = neighbour.Neighbour();
#ifdef PZDEBUG
if (!neighbour.Exists()) {
DebugStop();
}
#endif
}
}
}
//SingularElements(..)
void TPZAnalysisError::ZoomInSingularity(REAL csi, TPZCompElSide elside, REAL singularity_strength) {
REAL hn = 1./pow(csi,1./singularity_strength);
REAL Q=2.;
REAL NcReal = log( 1.+(1./hn - 1.)*(Q - 1.) )/log(Q);
int Nc = 0;
while(REAL(Nc) < (NcReal+0.5)) Nc++;
int minporder = 2;
TPZStack<TPZCompElSide> ElToRefine;
TPZStack<int> POrder;
TPZStack<TPZGeoElSide> subelements;
TPZStack<int64_t> csubindex;
ElToRefine.Push(elside);
POrder.Push(Nc);
while(ElToRefine.NElements()) {
/** Take the next element and its interpolation order from the stack*/
TPZCompElSide curelside = ElToRefine.Pop();
int curporder = POrder.Pop();
if(!curelside.Exists()) continue;
int64_t cindex = curelside.Element()->Index();
if(cindex < 0) continue;
/** Cast the element to an interpolated element if possible*/
TPZCompEl *cel = curelside.Element();
TPZInterpolatedElement *cintel = 0;
cintel = dynamic_cast<TPZInterpolatedElement *> (cel);
/** If the element is not interpolated, nothing to do */
if(!cintel) continue;
/** Set the interpolation order of the current element to curporder*/
if(curporder == minporder) {
cintel->PRefine(Nc);
fSingular.Push(curelside);
} else {
cintel->PRefine(curporder);
cintel->Divide(cindex,csubindex,1);
/** Identify the subelements along the side and push them on the stack*/
}
TPZGeoElSide gelside = curelside.Reference();
if(!gelside.Exists()) continue;
gelside.GetSubElements2(subelements);
int64_t ns = subelements.NElements();
curporder--;
int64_t is;
for(is=0; is<ns; is++) {
TPZGeoElSide sub = subelements[is];
TPZCompElSide csub = sub.Reference();
if(csub.Exists()) {
ElToRefine.Push(csub);
POrder.Push(curporder);
}
}
}
ExpandConnected(fSingular);
/*
REAL H1_error,L2_error,estimate;
TPZBlock *flux=0;
int64_t nel = fElIndexes.NElements();
for(int64_t elloc=0;elloc<nel;elloc++) {
int64_t el = fElIndexes[elloc];
estimate = fElErrors[elloc];
REAL csi = estimate / fAdmissibleError;
REAL h = h_Parameter(intellist[el]);
REAL hn = h/pow(csi,1./.9);
REAL Nc = log( 1.+(h/hn - 1.)*(Q - 1.) )/log(Q);
if(hn > 1.3*h) hn = 2.0*h*hn / (h + hn);
REAL hsub = h;//100.0;//pode ser = h ; Cedric
TPZCompEl *locel = intellist[el];
//obter um subelemento que contem o ponto singular e tem tamanho <= hn
TPZAdmChunkVector<TPZCompEl *> sublist;
while(hsub > hn) {
TPZVec<int64_t> indexsubs;
int64_t index = locel->Index();
locel->Divide(index,indexsubs,1);
int64_t nsub = indexsubs.NElements();
TPZAdmChunkVector<TPZCompEl *> listsub(0);
for(int64_t k=0;k<nsub;k++) {
index = listsub.AllocateNewElement();
listsub[index] = Mesh()->ElementVec()[indexsubs[k]];
}
//existe um unico filho que contem o ponto singular
SingularElement(point,listsub,sublist);
hsub = h_Parameter(sublist[0]);
}
TPZInterpolatedElement *intel = (TPZInterpolatedElement *) locel;
intel->PRefine(Nc+1);
indexlist.Push(intel->Index());
//os elemento viz devem ter ordens menores a cel quanto mais longe de point
TPZInterpolatedElement *neighkeep,*neigh;
//feito s�para o caso 1d , extender para o caso geral
int dim = intel->Dimension();
if(dim != 1) {
cout << "TPZAnalysisError::Step3 not dimension implemented , dimension = " << intellist[el]->Dimension() << endl;
return ;//exit(1);
}
for(int side=0;side<2;side++) {
int ly = 1;
TPZGeoElSide neighside = intel->Reference()->Neighbour(side);
TPZGeoElSide neighsidekeep = neighside;
TPZCompElSide neighsidecomp(0,0);
TPZStack<TPZCompElSide> elvec(0);
TPZCompElSide thisside(intel,side);
if(!neighsidekeep.Exists()) thisside.HigherLevelElementList(elvec,1,1);
if(!neighsidekeep.Exists() && elvec.NElements() == 0) {
neighsidekeep = thisside.LowerLevelElementList(1).Reference();
} else if(elvec.NElements() != 0) {
neighsidekeep = elvec[0].Reference();
}
while(ly < (Nc+1) && neighsidekeep.Exists() && neighsidekeep.Element()->Reference()->Material()->Id() > -1) {
neigh = (TPZInterpolatedElement *) neighsidekeep.Element()->Reference();
if(neigh) {
neigh->PRefine(ly);
int otherside = (neighsidekeep.Side()+1)%2;
neighsidekeep.SetSide(otherside);
indexlist.Push(neighsidekeep.Reference().Element()->Index());
}
neighside = neighsidekeep.Neighbour();
while(!neighside.Exists()) {
neighsidecomp = neighsidekeep.Reference();
neighsidecomp.HigherLevelElementList(elvec,1,1);
if(elvec.NElements()) {
neighside = elvec[0].Reference();
break;
}
neighside = neighsidecomp.LowerLevelElementList(1).Reference();
if(!neighside.Exists()) break;
}
neighsidekeep = neighside;
ly++;
}
}
}//for
Mesh()->InitializeBlock();
*/
}
int TPZCheckGeom::CheckSubFatherTransform(TPZGeoEl *subel, int sidesub) {
int check = 0;
TPZGeoElSide father = subel->Father2(sidesub);
if(!father.Exists()) return check;
TPZIntPoints *integ = subel->CreateSideIntegrationRule(sidesub,2);
int subsidedim = subel->SideDimension(sidesub);
int subdim = subel->Dimension();
TPZTransform trans(subsidedim);
trans = subel->BuildTransform2(sidesub,father.Element(),trans);
int fathsidedim = father.Dimension();
int fathdim = father.Element()->Dimension();
int nsubsides = subel->NSides();
int nfathsides = father.Element()->NSides();
TPZTransform trans1 = subel->SideToSideTransform(sidesub,nsubsides-1);
TPZTransform trans2 = father.Element()->SideToSideTransform(father.Side(),nfathsides-1);
TPZVec<REAL> intpoint(subsidedim);
TPZVec<REAL> sidetopoint(fathsidedim);
TPZVec<REAL> elpoint1(subdim),elpoint2(fathdim);
TPZVec<REAL> x1(3),x2(3);
int nintpoints = integ->NPoints();
int ip;
REAL w;
for(ip=0; ip<nintpoints; ip++) {
integ->Point(ip,intpoint,w);
trans.Apply(intpoint,sidetopoint);
trans1.Apply(intpoint,elpoint1);
trans2.Apply(sidetopoint,elpoint2);
subel->X(elpoint1,x1);
father.Element()->X(elpoint2,x2);
int otherfatherside = father.Element()->WhichSide(elpoint2);
if(otherfatherside != father.Side()) {
int son = subel->WhichSubel();
PZError << "TPZCheckGeom::CheckSubFatherTransform son " << son << " sidesub = "<< sidesub
<< " fathside = " << father.Side() << " otherfatherside = " << otherfatherside << endl;
check=1;
}
REAL dif = 0;
int nx = x1.NElements();
int ix;
for(ix=0; ix<nx; ix++) dif += (x1[ix]-x2[ix])*(x1[ix]-x2[ix]);
if(dif > 1.e-6) {
int son = subel->WhichSubel();
PZError << "TPZCheckGeom::CheckSubFatherTransform son " << son << " sidesub = "<< sidesub
<< " fathside = " << father.Side() << " dif = " << dif << endl;
// subel->Print();
check = 1;
TPZTransform t = subel->ComputeParamTrans(father.Element(),father.Side(),sidesub);
t.PrintInputForm(cout);
cout << endl;
trans.PrintInputForm(cout);
cout << endl;
check = 1;
}
}
if(check == 0) {
TPZTransform t = subel->ComputeParamTrans(father.Element(),father.Side(),sidesub);
check = t.Compare(trans);
if(check == 1){
int son = subel->WhichSubel();
PZError << "TPZCheckGeom::CheckSubFatherTransform son " << son << " sidesub = "<< sidesub
<< " fathside = " << father.Side() << endl;
t.PrintInputForm(cout);
cout << endl;
trans.PrintInputForm(cout);
cout << endl;
}
// compare t with trans
}
delete integ;
return check;
}