void FloodPlot::timeseriesData(TimeSeries tsData)
{
if (tsData.values().empty()){
return;
}
m_startDateTime = tsData.firstReportDateTime();
m_endDateTime = tsData.firstReportDateTime() + Time(tsData.daysFromFirstReport(tsData.daysFromFirstReport().size()-1));
m_duration = (m_endDateTime-m_startDateTime).totalDays();
m_xAxisMin = 0.0;
m_xAxisMax = m_duration;
if (m_plot2DTimeAxis == NULL)
{
m_plot2DTimeAxis = new Plot2DTimeAxis(m_startDateTime, m_duration);
m_qwtPlot->setAxisTitle(QwtPlot::xBottom, " Simulation Time");
m_qwtPlot->setAxisScale(QwtPlot::xBottom, 0, m_duration);
m_qwtPlot->setAxisScaleDraw(QwtPlot::xBottom, m_plot2DTimeAxis);
m_qwtPlot->setAxisLabelRotation(QwtPlot::xBottom, -90.0);
m_qwtPlot->setAxisLabelAlignment(QwtPlot::xBottom, Qt::AlignLeft | Qt::AlignBottom);
}
else
{
m_plot2DTimeAxis->startDateTime(m_startDateTime);
m_plot2DTimeAxis->duration(m_duration);
}
TimeSeriesFloodPlotData::Ptr data = TimeSeriesFloodPlotData::create(tsData);
floodPlotData(data);
}
TimeSeriesFloodPlotData::TimeSeriesFloodPlotData(TimeSeries timeSeries, QwtDoubleInterval colorMapRange)
: m_timeSeries(timeSeries),
m_minValue(minimum(timeSeries.values())),
m_maxValue(maximum(timeSeries.values())),
m_minX(timeSeries.firstReportDateTime().date().dayOfYear()),
m_maxX(ceil(timeSeries.daysFromFirstReport()[timeSeries.daysFromFirstReport().size()-1]+timeSeries.firstReportDateTime().date().dayOfYear()+timeSeries.firstReportDateTime().time().totalDays())), // end day
m_minY(0), // start hour
m_maxY(24), // end hour
m_startFractionalDay(timeSeries.firstReportDateTime().date().dayOfYear()+timeSeries.firstReportDateTime().time().totalDays()),
m_colorMapRange(colorMapRange)
{
// data range
setBoundingRect(QwtDoubleRect(m_minX, m_minY, m_maxX-m_minX, m_maxY-m_minY));
}
TimeSeriesLinePlotData::TimeSeriesLinePlotData(TimeSeries timeSeries, double fracDaysOffset)
: m_timeSeries(timeSeries),
m_minX(timeSeries.firstReportDateTime().date().dayOfYear()+timeSeries.firstReportDateTime().time().totalDays()),
m_maxX(timeSeries.daysFromFirstReport()[timeSeries.daysFromFirstReport().size()-1]+timeSeries.firstReportDateTime().date().dayOfYear()+timeSeries.firstReportDateTime().time().totalDays()), // end day
m_minY(minimum(timeSeries.values())),
m_maxY(maximum(timeSeries.values())),
m_size(timeSeries.values().size())
{
m_boundingRect = QwtDoubleRect(m_minX, m_minY, (m_maxX - m_minX), (m_maxY - m_minY));
m_minValue = m_minY;
m_maxValue = m_maxY;
m_units = timeSeries.units();
m_fracDaysOffset = fracDaysOffset; // note updating in xValue does not affect scaled axis
m_x = m_timeSeries.daysFromFirstReport();
m_y = m_timeSeries.values();
}
void LinePlot::timeseriesData(TimeSeries tsData, const std::string& name, QColor color)
{
if (tsData.values().empty()){
return;
}
double offset=0.0;
if (m_plot2DTimeAxis == NULL)
{
m_startDateTime = tsData.firstReportDateTime();
m_endDateTime = tsData.firstReportDateTime() + Time(tsData.daysFromFirstReport(tsData.daysFromFirstReport().size()-1));
m_duration = (m_endDateTime-m_startDateTime).totalDays();
m_plot2DTimeAxis = new Plot2DTimeAxis(m_startDateTime, m_duration);
m_qwtPlot->setAxisTitle(QwtPlot::xBottom, " Simulation Time");
m_qwtPlot->setAxisScaleDraw(QwtPlot::xBottom, m_plot2DTimeAxis);
m_xAxisMin = 0.0;
m_xAxisMax = m_duration;
m_qwtPlot->setAxisScale(QwtPlot::xBottom, 0, m_duration);
m_qwtPlot->setAxisLabelRotation(QwtPlot::xBottom, -90.0);
m_qwtPlot->setAxisLabelAlignment(QwtPlot::xBottom, Qt::AlignLeft | Qt::AlignBottom);
}
else
{
if (tsData.firstReportDateTime() < m_startDateTime) {
m_xAxisMin = (tsData.firstReportDateTime() - m_startDateTime).totalDays();
offset = m_xAxisMin;
} else {
offset = (tsData.firstReportDateTime() - m_startDateTime).totalDays();
}
if ((tsData.firstReportDateTime() + Time(tsData.daysFromFirstReport(tsData.daysFromFirstReport().size()-1))) > m_endDateTime) {
m_xAxisMax += ((tsData.firstReportDateTime() + Time(tsData.daysFromFirstReport(tsData.daysFromFirstReport().size()-1))) - m_endDateTime).totalDays();
}
}
TimeSeriesLinePlotData::Ptr data = TimeSeriesLinePlotData::create(tsData, offset);
linePlotData(data, name, color, offset);
}
TEST_F(DataFixture,TimeSeries_AddSubtractSameTimePeriod)
{
std::string units = "W";
Date startDate(Date(MonthOfYear(MonthOfYear::Feb),21));
DateTime startDateTime(startDate, Time(0,1,0,0));
// interval
Time interval = Time(0,1,0,0);
Vector intervalValues(3);
intervalValues(0) = 0;
intervalValues(1) = 1;
intervalValues(2) = 2;
TimeSeries intervalTimeSeries(startDateTime, interval, intervalValues, units);
ASSERT_TRUE(!intervalTimeSeries.values().empty());
// detailed
DateTimeVector dateTimes;
dateTimes.push_back(startDateTime + Time(0,0,0,0));
dateTimes.push_back(startDateTime + Time(0,0,30,0));
dateTimes.push_back(startDateTime + Time(0,1,0,0));
dateTimes.push_back(startDateTime + Time(0,1,30,0));
dateTimes.push_back(startDateTime + Time(0,2,0,0));
Vector detailedValues(5);
detailedValues(0) = 0.0; // 1:00
detailedValues(1) = 0.5; // 1:30
detailedValues(2) = 1.0; // 2:00
detailedValues(3) = 1.5; // 2:30
detailedValues(4) = 2.0; // 3:00
TimeSeries detailedTimeSeries(dateTimes, detailedValues, units);
ASSERT_TRUE(!detailedTimeSeries.values().empty());
// sum and difference
TimeSeries sum = intervalTimeSeries + detailedTimeSeries;
TimeSeries diff1 = intervalTimeSeries - detailedTimeSeries;
TimeSeries diff2 = detailedTimeSeries - intervalTimeSeries;
ASSERT_TRUE(!sum.values().empty());
ASSERT_TRUE(!diff1.values().empty());
ASSERT_TRUE(!diff2.values().empty());
// EXPECT_EQ((unsigned)5, sum.dateTimes().size());
// EXPECT_EQ((unsigned)5, diff1.dateTimes().size());
// EXPECT_EQ((unsigned)5, diff2.dateTimes().size());
EXPECT_EQ((unsigned)5, sum.daysFromFirstReport().size());
EXPECT_EQ((unsigned)5, diff1.daysFromFirstReport().size());
EXPECT_EQ((unsigned)5, diff2.daysFromFirstReport().size());
// EXPECT_EQ(startDateTime, sum.dateTimes().front());
// EXPECT_EQ(startDateTime, diff1.dateTimes().front());
// EXPECT_EQ(startDateTime, diff2.dateTimes().front());
EXPECT_EQ(startDateTime, sum.firstReportDateTime());
EXPECT_EQ(startDateTime, diff1.firstReportDateTime());
EXPECT_EQ(startDateTime, diff2.firstReportDateTime());
DateTime endDateTime = startDateTime + Time(0,2,0,0);
// EXPECT_EQ(endDateTime, sum.dateTimes().back());
// EXPECT_EQ(endDateTime, diff1.dateTimes().back());
// EXPECT_EQ(endDateTime, diff2.dateTimes().back());
EXPECT_EQ(endDateTime, sum.firstReportDateTime() + Time(sum.daysFromFirstReport(sum.daysFromFirstReport().size()-1)));
EXPECT_EQ(endDateTime, diff1.firstReportDateTime() + Time(diff1.daysFromFirstReport(diff1.daysFromFirstReport().size()-1)));
EXPECT_EQ(endDateTime, diff2.firstReportDateTime() + Time(diff2.daysFromFirstReport(diff2.daysFromFirstReport().size()-1)));
// 1:00
EXPECT_EQ(0, sum.value(Time(0,0,0,0)));
EXPECT_EQ(0, diff1.value(Time(0,0,0,0)));
EXPECT_EQ(0, diff2.value(Time(0,0,0,0)));
// 1:30
EXPECT_EQ(1.5, sum.value(Time(0,0,30,0)));
EXPECT_EQ(0.5, diff1.value(Time(0,0,30,0)));
EXPECT_EQ(-0.5, diff2.value(Time(0,0,30,0)));
// 2:00
EXPECT_EQ(2, sum.value(Time(0,1,0,0)));
EXPECT_EQ(0.0, diff1.value(Time(0,1,0,0)));
EXPECT_EQ(0.0, diff2.value(Time(0,1,0,0)));
// 2:30
EXPECT_EQ(3.5, sum.value(Time(0,1,30,0)));
EXPECT_EQ(0.5, diff1.value(Time(0,1,30,0)));
EXPECT_EQ(-0.5, diff2.value(Time(0,1,30,0)));
// Test helper function for summing a vector.
TimeSeriesVector sumAndDiffs;
sumAndDiffs.push_back(sum);
sumAndDiffs.push_back(diff1);
sumAndDiffs.push_back(diff2);
TimeSeries ans = openstudio::sum(sumAndDiffs);
EXPECT_FALSE(ans.values().empty());
// 1:00
EXPECT_DOUBLE_EQ(0, ans.value(Time(0,0,0,0)));
// 1:30
EXPECT_DOUBLE_EQ(1.5, ans.value(Time(0,0,30,0)));
// 2:00
EXPECT_DOUBLE_EQ(2.0, ans.value(Time(0,1,0,0)));
// 2:30
EXPECT_DOUBLE_EQ(3.5, ans.value(Time(0,1,30,0)));
// Test multiplication and division with a scalar
sumAndDiffs.push_back(sum/2.0);
sumAndDiffs.push_back(3.0*diff1);
ans = openstudio::sum(sumAndDiffs);
EXPECT_FALSE(ans.values().empty());
// 1:00
EXPECT_DOUBLE_EQ(0, ans.value(Time(0,0,0,0)));
// 1:30
EXPECT_DOUBLE_EQ(3.75, ans.value(Time(0,0,30,0)));
// 2:00
EXPECT_DOUBLE_EQ(3.0, ans.value(Time(0,1,0,0)));
// 2:30
EXPECT_DOUBLE_EQ(6.75, ans.value(Time(0,1,30,0)));
}
boost::optional<IdfObject> ForwardTranslator::translateScheduleVariableInterval( ScheduleVariableInterval & modelObject )
{
IdfObject idfObject( openstudio::IddObjectType::Schedule_Compact );
m_idfObjects.push_back(idfObject);
idfObject.setName(modelObject.name().get());
boost::optional<ScheduleTypeLimits> scheduleTypeLimits = modelObject.scheduleTypeLimits();
if (scheduleTypeLimits){
boost::optional<IdfObject> idfScheduleTypeLimits = translateAndMapModelObject(*scheduleTypeLimits);
if (idfScheduleTypeLimits){
idfObject.setString(Schedule_CompactFields::ScheduleTypeLimitsName, idfScheduleTypeLimits->name().get());
}
}
TimeSeries timeseries = modelObject.timeSeries();
// Check that the time series has at least one point
if(timeseries.values().size() == 0)
{
LOG(Error,"Time series in schedule '" << modelObject.name().get() << "' has no values, schedule will not be translated");
return boost::optional<IdfObject>();
}
DateTime firstReportDateTime = timeseries.firstReportDateTime();
Vector daysFromFirst = timeseries.daysFromFirstReport();
std::vector<long> secondsFromFirst = timeseries.secondsFromFirstReport();
Vector values = timeseries.values();
// We aren't using this - should we?
std::string interpolateField = "Interpolate:No";
if (modelObject.interpolatetoTimestep()){
interpolateField = "Interpolate:Yes";
}
// New version assumes that the interval is less than one day.
// The original version did not, so it was a bit more complicated.
// The last date data was written
Date lastDate = firstReportDateTime.date();
Time dayDelta = Time(1.0);
// The day number of the date that data was last written relative to the first date
//double lastDay = 0.0;
int lastDay = 0;
// Adjust the floating point day delta to be relative to the beginning of the first day and
// shift the start of the loop if needed
int secondShift = firstReportDateTime.time().totalSeconds();
unsigned int start = 0;
if(secondShift == 0) {
start = 1;
} else {
for(unsigned int i=0;i<secondsFromFirst.size();i++) {
secondsFromFirst[i] += secondShift;
}
}
// Start the input into the schedule object
unsigned fieldIndex = Schedule_CompactFields::ScheduleTypeLimitsName + 1;
//idfObject.setString(fieldIndex, interpolateField);
//++fieldIndex;
fieldIndex = startNewDay(idfObject,fieldIndex,lastDate);
for(unsigned int i=start; i < values.size()-1; i++){
// Loop over the time series values and write out values to the
// schedule. This version is based on the seconds from the start
// of the time series, so should not be vulnerable to round-off.
// It was translated from the day version, so there could be
// issues associated with that.
//
// We still have a potential aliasing problem unless the API has
// enforced that the times in the time series are all distinct when
// rounded to the minute. Is that happening?
int secondsFromStartOfDay = secondsFromFirst[i] % 86400;
int today = (secondsFromFirst[i]-secondsFromStartOfDay)/86400;
// Check to see if we are at the end of a day.
if(secondsFromStartOfDay==0 || secondsFromStartOfDay==86400) {
// This value is an end of day value, so end the day and set up the next
// Note that 00:00:00 counts as the end of the previous day - we only write
// out the 24:00:00 value and not both.
fieldIndex = addUntil(idfObject,fieldIndex,24,0,values[i]);
lastDate += dayDelta;
fieldIndex = startNewDay(idfObject,fieldIndex,lastDate);
} else {
// This still could be on a different day
if(today != lastDay) {
// We're on a new day, need a 24:00:00 value and set up the next day
fieldIndex = addUntil(idfObject,fieldIndex,24,0,values[i]);
lastDate += dayDelta;
fieldIndex = startNewDay(idfObject,fieldIndex,lastDate);
}
if(values[i] == values[i+1]){
// Bail on values that match the next value
continue;
}
// Write out the current entry
Time time(0,0,0,secondsFromStartOfDay);
int hours = time.hours();
int minutes = time.minutes() + floor((time.seconds()/60.0) + 0.5);
// This is a little dangerous, but all of the problematic 24:00
// times that might need to cause a day++ should be caught above.
if(minutes==60){
hours += 1;
minutes = 0;
}
fieldIndex = addUntil(idfObject,fieldIndex,hours,minutes,values[i]);
}
lastDay = today;
}
// Handle the last point a little differently to make sure that the schedule ends exactly on the end of a day
unsigned int i = values.size()-1;
// We'll skip a sanity check here, but it might be a good idea to add one at some point
fieldIndex = addUntil(idfObject,fieldIndex,24,0,values[i]);
return idfObject;
}
boost::optional<IdfObject> ForwardTranslator::translateScheduleFixedInterval( ScheduleFixedInterval & modelObject )
{
IdfObject idfObject( openstudio::IddObjectType::Schedule_Compact );
m_idfObjects.push_back(idfObject);
idfObject.setName(modelObject.name().get());
boost::optional<ScheduleTypeLimits> scheduleTypeLimits = modelObject.scheduleTypeLimits();
if (scheduleTypeLimits){
boost::optional<IdfObject> idfScheduleTypeLimits = translateAndMapModelObject(*scheduleTypeLimits);
if (idfScheduleTypeLimits){
idfObject.setString(Schedule_CompactFields::ScheduleTypeLimitsName, idfScheduleTypeLimits->name().get());
}
}
TimeSeries timeseries = modelObject.timeSeries();
// Check that the time series has at least one point
if(timeseries.values().size() == 0)
{
LOG(Error,"Time series in schedule '" << modelObject.name().get() << "' has no values, schedule will not be translated");
return boost::optional<IdfObject>();
}
DateTime firstReportDateTime = timeseries.firstReportDateTime();
Vector daysFromFirst = timeseries.daysFromFirstReport();
Vector values = timeseries.values();
// We aren't using this - should we?
std::string interpolateField;
if (modelObject.interpolatetoTimestep()){
interpolateField = "Interpolate:Yes";
}else{
interpolateField = "Interpolate:No";
}
// New version assumes that the interval is less than one day.
// The original version did not, so it was a bit more complicated.
// 5.787x10^-6 days is a little less than half a second
double eps = 5.787e-6;
double intervalDays = modelObject.intervalLength();
// The last date data was written
Date lastDate = firstReportDateTime.date();
Time dayDelta = Time(1.0);
// The day number of the date that data was last written relative to the first date
double lastDay = 0.0;
// Adjust the floating point day delta to be relative to the beginning of the first day and
// shift the start of the loop if needed
double timeShift = firstReportDateTime.time().totalDays();
unsigned int start = 0;
if(timeShift == 0.0)
{
start = 1;
}
else
{
for(unsigned int i=0;i<daysFromFirst.size();i++)
{
daysFromFirst[i] += timeShift;
}
}
// Start the input into the schedule object
unsigned fieldIndex = Schedule_CompactFields::ScheduleTypeLimitsName + 1;
fieldIndex = startNewDay(idfObject,fieldIndex,lastDate);
for(unsigned int i=start; i < values.size()-1; i++)
{
// We could loop over the entire array and use the fact that the
// last entry in the daysFromFirstReport vector should be a round
// number to avoid logic. However, this whole thing is very, very
// sensitive to round off issues. We still have a HUGE aliasing
// problem unless the API has enforced that the times in the
// time series are all distinct when rounded to the minute. Is that
// happening?
double today = floor(daysFromFirst[i]);
double hms = daysFromFirst[i]-today;
// Here, we need to make sure that we aren't nearly the end of a day
if(fabs(1.0-hms) < eps)
{
today += 1;
hms = 0.0;
}
if(hms < eps)
{
// This value is an end of day value, so end the day and set up the next
fieldIndex = addUntil(idfObject,fieldIndex,24,0,values[i]);
lastDate += dayDelta;
fieldIndex = startNewDay(idfObject,fieldIndex,lastDate);
}
else
{
if(today != lastDay)
{
// We're on a new day, need a 24:00:00 value and set up the next day
fieldIndex = addUntil(idfObject,fieldIndex,24,0,values[i]);
lastDate += dayDelta;
fieldIndex = startNewDay(idfObject,fieldIndex,lastDate);
}
if(values[i] == values[i+1])
{
// Bail on values that match the next value
continue;
}
// Write out the current entry
Time time(hms);
int hours = time.hours();
int minutes = time.minutes() + floor((time.seconds()/60.0) + 0.5);
// This is a little dangerous, but all of the problematic 24:00
// times that might need to cause a day++ should be caught above.
if(minutes==60)
{
hours += 1;
minutes = 0;
}
fieldIndex = addUntil(idfObject,fieldIndex,hours,minutes,values[i]);
}
lastDay = today;
}
// Handle the last point a little differently to make sure that the schedule ends exactly on the end of a day
unsigned int i = values.size()-1;
// We'll skip a sanity check here, but it might be a good idea to add one at some point
fieldIndex = addUntil(idfObject,fieldIndex,24,0,values[i]);
return idfObject;
}