bool PCB_POLYGON::Parse( XNODE* aNode,
const wxString& aDefaultMeasurementUnit,
const wxString& aActualConversion )
{
XNODE* lNode;
wxString propValue;
lNode = FindNode( aNode, wxT( "netNameRef" ) );
if( lNode )
{
lNode->GetAttribute( wxT( "Name" ), &propValue );
propValue.Trim( false );
propValue.Trim( true );
m_net = propValue;
m_netCode = GetNetCode( m_net );
}
// retrieve polygon outline
FormPolygon( aNode, &m_outline, aDefaultMeasurementUnit, aActualConversion );
m_positionX = m_outline[0]->x;
m_positionY = m_outline[0]->y;
// fill the polygon with the same contour as its outline is
m_islands.Add( new VERTICES_ARRAY );
FormPolygon( aNode, m_islands[0], aDefaultMeasurementUnit, aActualConversion );
return true;
}
bool PCB_COPPER_POUR::Parse( XNODE* aNode,
wxString aDefaultMeasurementUnit,
wxString aActualConversion,
wxStatusBar* aStatusBar )
{
XNODE* lNode;
wxString pourType, str, propValue;
int pourSpacing, thermalWidth;
// aStatusBar->SetStatusText( aStatusBar->GetStatusText() + wxT( " CooperPour..." ) );
//str = FindNode( aNode, wxT( "pourType" ) )->GetNodeContent();
//str.Trim( false );
//pourType = str.MakeUpper();
lNode = FindNode( aNode, wxT( "netNameRef" ) );
if( lNode )
{
lNode->GetAttribute( wxT( "Name" ), &propValue );
propValue.Trim( false );
propValue.Trim( true );
m_net = propValue;
m_netCode = GetNetCode( m_net );
}
if( FindNode( aNode, wxT( "width" ) ) )
SetWidth( FindNode( aNode, wxT( "width" ) )->GetNodeContent(),
aDefaultMeasurementUnit, &m_width, aActualConversion );
if( FindNode( aNode, wxT( "pourSpacing" ) ) )
SetWidth( FindNode( aNode, wxT( "pourSpacing" ) )->GetNodeContent(),
aDefaultMeasurementUnit, &pourSpacing, aActualConversion );
if( FindNode( aNode, wxT( "thermalWidth" ) ) )
SetWidth( FindNode( aNode, wxT( "thermalWidth" ) )->GetNodeContent(),
aDefaultMeasurementUnit, &thermalWidth, aActualConversion );
lNode = FindNode( aNode, wxT( "pcbPoly" ) );
if( lNode )
{
// retrieve copper pour outline
FormPolygon( lNode, &m_outline, aDefaultMeasurementUnit, aActualConversion );
m_positionX = m_outline[0]->x;
m_positionY = m_outline[0]->y;
}
else
{
return false;
}
return true;
}
bool PCB_PLANE::Parse( XNODE* aNode,
wxString aDefaultMeasurementUnit,
wxString aActualConversion,
wxStatusBar* aStatusBar )
{
XNODE* lNode;
wxString pourType, str, propValue;
// aStatusBar->SetStatusText( aStatusBar->GetStatusText() + wxT( " Plane..." ) );
lNode = FindNode( aNode, wxT( "netNameRef" ) );
if( lNode )
{
lNode->GetAttribute( wxT( "Name" ), &propValue );
propValue.Trim( false );
propValue.Trim( true );
m_net = propValue;
m_netCode = GetNetCode( m_net );
}
if( FindNode( aNode, wxT( "width" ) ) )
SetWidth( FindNode( aNode, wxT( "width" ) )->GetNodeContent(),
aDefaultMeasurementUnit, &m_width, aActualConversion );
lNode = FindNode( aNode, wxT( "pcbPoly" ) );
if( lNode )
{
// retrieve plane outline
FormPolygon( lNode, &m_outline, aDefaultMeasurementUnit, aActualConversion );
m_positionX = m_outline[0]->x;
m_positionY = m_outline[0]->y;
}
else
{
return false;
}
return true;
}
void PCB_EDIT_FRAME::ReadMacros()
{
wxString str;
wxFileName fn;
fn = GetBoard()->GetFileName();
fn.SetExt( MacrosFileExtension );
wxFileDialog dlg( this, _( "Read Macros File" ), fn.GetPath(),
fn.GetFullName(), MacrosFileWildcard,
wxFD_OPEN | wxFD_FILE_MUST_EXIST | wxFD_CHANGE_DIR );
if( dlg.ShowModal() == wxID_CANCEL )
return;
if( !wxFileExists( dlg.GetPath() ) )
{
wxString msg;
msg.Printf( _( "File %s not found" ), GetChars( dlg.GetPath() ) );
DisplayError( this, msg );
return;
}
wxXmlDocument xml;
xml.SetFileEncoding( wxT( "UTF-8" ) );
if( !xml.Load( dlg.GetFilename() ) )
return;
XNODE *macrosNode = (XNODE*) xml.GetRoot()->GetChildren();
while( macrosNode )
{
int number = -1;
if( macrosNode->GetName() == wxT( "macros" ) )
{
number = wxAtoi( macrosNode->GetAttribute( wxT( "number" ), wxT( "-1" ) ) );
if( number >= 0 && number < 10 )
{
m_Macros[number].m_Record.clear();
XNODE *hotkeyNode = (XNODE*) macrosNode->GetChildren();
while( hotkeyNode )
{
if( hotkeyNode->GetName() == wxT( "hotkey" ) )
{
int x = wxAtoi( hotkeyNode->GetAttribute( wxT( "x" ), wxT( "0" ) ) );
int y = wxAtoi( hotkeyNode->GetAttribute( wxT( "y" ), wxT( "0" ) ) );
int hk = wxAtoi( hotkeyNode->GetAttribute( wxT( "hkcode" ), wxT( "0" ) ) );
MACROS_RECORD macros_record;
macros_record.m_HotkeyCode = hk;
macros_record.m_Position.x = x;
macros_record.m_Position.y = y;
m_Macros[number].m_Record.push_back( macros_record );
}
hotkeyNode = (XNODE*) hotkeyNode->GetNext();
}
}
}
macrosNode = (XNODE*) macrosNode->GetNext();
}
}
void LoadInputFile( wxString aFileName, wxXmlDocument* aXmlDoc )
{
char line[sizeof( ACCEL_ASCII_KEYWORD )];
int tok;
XNODE* iNode = NULL, *cNode = NULL;
wxString str, propValue, content;
wxCSConv conv( wxT( "windows-1251" ) );
FILE* fp = wxFopen( aFileName, wxT( "rt" ) );
if( !fp )
THROW_IO_ERROR( wxT( "Unable to open file: " ) + aFileName );
// check file format
if( !fgets( line, sizeof( line ), fp )
|| strcmp( line, ACCEL_ASCII_KEYWORD ) )
THROW_IO_ERROR( "Unknown file type" );
// rewind the file
fseek( fp, 0, SEEK_SET );
// lexer now owns fp, will close on exception or return
DSNLEXER lexer( empty_keywords, 0, fp, aFileName );
iNode = new XNODE( wxXML_ELEMENT_NODE, wxT( "www.lura.sk" ) );
while( ( tok = lexer.NextTok() ) != DSN_EOF )
{
if( tok == DSN_RIGHT )
{
iNode = iNode->GetParent();
}
else if( tok == DSN_LEFT )
{
tok = lexer.NextTok();
str = wxEmptyString;
cNode = new XNODE( wxXML_ELEMENT_NODE, wxString( lexer.CurText(), conv ) );
iNode->AddChild( cNode );
iNode = cNode;
}
else if( cNode )
{
str = wxString( lexer.CurText(), conv );
if( tok == DSN_STRING )
{
// update attribute
if( iNode->GetAttribute( wxT( "Name" ), &propValue ) )
{
iNode->DeleteAttribute( wxT( "Name" ) );
iNode->AddAttribute( wxT( "Name" ), propValue + wxT( ' ' ) + str );
}
else
iNode->AddAttribute( wxT( "Name" ), str );
}
else if( str != wxEmptyString )
{
// update node content
content = cNode->GetNodeContent() + wxT( ' ' ) + str;
if( cNode->GetChildren() )
cNode->GetChildren()->SetContent( content );
else
cNode->AddChild( new wxXmlNode( wxXML_TEXT_NODE,
wxEmptyString,
content ) );
}
}
}
if( iNode )
{
aXmlDoc->SetRoot( iNode );
//aXmlDoc->Save( wxT( "test.xml" ) );
}
}