void SCH_EDIT_FRAME::updateFindReplaceView( wxFindDialogEvent& aEvent )
{
wxString msg;
SCH_SHEET_LIST schematic( g_RootSheet );
SCH_FIND_COLLECTOR_DATA data;
SCH_FIND_REPLACE_DATA searchCriteria;
bool warpCursor = !( aEvent.GetFlags() & FR_NO_WARP_CURSOR );
searchCriteria.SetFlags( aEvent.GetFlags() );
searchCriteria.SetFindString( aEvent.GetFindString() );
searchCriteria.SetReplaceString( aEvent.GetReplaceString() );
if( m_foundItems.GetItem( data ) != NULL )
{
wxLogTrace( traceFindReplace, wxT( "Found " ) + m_foundItems.GetText() );
SCH_SHEET_PATH* sheet = schematic.GetSheetByPath( data.GetSheetPath() );
wxCHECK_RET( sheet != NULL, wxT( "Could not find sheet path " ) +
data.GetSheetPath() );
SCH_ITEM* item = (SCH_ITEM*)m_foundItems.GetItem( data );
// Make the item temporarily visible just in case it's hide flag is set. This
// has no effect on objects that don't support hiding. If this is a close find
// dialog event, clear the temporary visibility flag.
if( item )
{
if( aEvent.GetEventType() == wxEVT_COMMAND_FIND_CLOSE )
item->SetForceVisible( false );
else if( item->Type() == SCH_FIELD_T && !( (SCH_FIELD*) item )->IsVisible() )
item->SetForceVisible( true );
}
if( sheet->PathHumanReadable() != m_CurrentSheet->PathHumanReadable() )
{
sheet->LastScreen()->SetZoom( GetScreen()->GetZoom() );
*m_CurrentSheet = *sheet;
m_CurrentSheet->UpdateAllScreenReferences();
SetScreen( sheet->LastScreen() );
}
// careful here
SetCrossHairPosition( data.GetPosition() );
RedrawScreen( data.GetPosition(), warpCursor );
msg = m_foundItems.GetText();
if( aEvent.GetFlags() & FR_SEARCH_REPLACE )
aEvent.SetFlags( aEvent.GetFlags() | FR_REPLACE_ITEM_FOUND );
}
else
{
if( aEvent.GetFlags() & FR_SEARCH_REPLACE )
aEvent.SetFlags( aEvent.GetFlags() & ~FR_REPLACE_ITEM_FOUND );
msg.Printf( _( "No item found matching %s." ), GetChars( aEvent.GetFindString() ) );
}
SetStatusText( msg );
}
void SCH_EDIT_FRAME::OnFindSchematicItem( wxFindDialogEvent& aEvent )
{
static wxPoint itemPosition; // the actual position of the matched item.
SCH_SHEET_LIST schematic;
wxString msg;
SCH_FIND_REPLACE_DATA searchCriteria;
bool warpCursor = !( aEvent.GetFlags() & FR_NO_WARP_CURSOR );
SCH_FIND_COLLECTOR_DATA data;
searchCriteria.SetFlags( aEvent.GetFlags() );
searchCriteria.SetFindString( aEvent.GetFindString() );
searchCriteria.SetReplaceString( aEvent.GetReplaceString() );
if( aEvent.GetEventType() == wxEVT_COMMAND_FIND_CLOSE )
{
if( m_foundItems.GetCount() == 0 )
return;
}
else if( m_foundItems.IsSearchRequired( searchCriteria ) )
{
if( aEvent.GetFlags() & FR_CURRENT_SHEET_ONLY && g_RootSheet->CountSheets() > 1 )
{
m_foundItems.Collect( searchCriteria, m_CurrentSheet );
}
else
{
m_foundItems.Collect( searchCriteria );
}
}
else
{
EDA_ITEM* currentItem = m_foundItems.GetItem( data );
if( currentItem != NULL )
currentItem->SetForceVisible( false );
m_foundItems.UpdateIndex();
}
if( m_foundItems.GetItem( data ) != NULL )
{
wxLogTrace( traceFindReplace, wxT( "Found " ) + m_foundItems.GetText() );
SCH_SHEET_PATH* sheet = schematic.GetSheet( data.GetSheetPath() );
wxCHECK_RET( sheet != NULL, wxT( "Could not find sheet path " ) +
data.GetSheetPath() );
// Make the item temporarily visible just in case it's hide flag is set. This
// has no effect on objects that don't support hiding. If this is a close find
// dialog event, clear the temporary visibility flag.
if( aEvent.GetEventType() == wxEVT_COMMAND_FIND_CLOSE )
m_foundItems.GetItem( data )->SetForceVisible( false );
else
m_foundItems.GetItem( data )->SetForceVisible( true );
if( sheet->PathHumanReadable() != m_CurrentSheet->PathHumanReadable() )
{
sheet->LastScreen()->SetZoom( GetScreen()->GetZoom() );
*m_CurrentSheet = *sheet;
m_CurrentSheet->UpdateAllScreenReferences();
SetScreen( sheet->LastScreen() );
}
sheet->LastScreen()->SetCrossHairPosition( data.GetPosition() );
RedrawScreen( data.GetPosition(), warpCursor );
msg = m_foundItems.GetText();
if( aEvent.GetFlags() & FR_SEARCH_REPLACE )
aEvent.SetFlags( aEvent.GetFlags() | FR_REPLACE_ITEM_FOUND );
}
else
{
if( aEvent.GetFlags() & FR_SEARCH_REPLACE )
aEvent.SetFlags( aEvent.GetFlags() & ~FR_REPLACE_ITEM_FOUND );
msg.Printf( _( "No item found matching %s." ), GetChars( aEvent.GetFindString() ) );
}
SetStatusText( msg );
}
void SCH_EDIT_FRAME::OnFindReplace( wxFindDialogEvent& aEvent )
{
static int nextFoundIndex = 0;
SCH_ITEM* item;
SCH_SHEET_PATH* sheet;
SCH_SHEET_LIST schematic( g_RootSheet );
SCH_FIND_COLLECTOR_DATA data;
SCH_FIND_REPLACE_DATA searchCriteria;
searchCriteria.SetFlags( aEvent.GetFlags() );
searchCriteria.SetFindString( aEvent.GetFindString() );
searchCriteria.SetReplaceString( aEvent.GetReplaceString() );
m_foundItems.SetReplaceString( aEvent.GetReplaceString() );
if( IsSearchCacheObsolete( searchCriteria ) )
{
if( aEvent.GetFlags() & FR_CURRENT_SHEET_ONLY && g_RootSheet->CountSheets() > 1 )
{
m_foundItems.Collect( searchCriteria, m_CurrentSheet );
}
else
{
m_foundItems.Collect( searchCriteria );
}
// Restore the next found index on cache refresh. Prevents single replace events
// from starting back at the beginning of the cache.
m_foundItems.SetFoundIndex( nextFoundIndex );
}
if( aEvent.GetEventType() == wxEVT_COMMAND_FIND_REPLACE_ALL )
{
while( ( item = (SCH_ITEM*) m_foundItems.GetItem( data ) ) != NULL )
{
SCH_ITEM* undoItem = data.GetParent();
// Don't save child items in undo list.
if( undoItem == NULL )
undoItem = item;
SetUndoItem( undoItem );
sheet = schematic.GetSheetByPath( data.GetSheetPath() );
wxCHECK_RET( sheet != NULL, wxT( "Could not find sheet path " ) + data.GetSheetPath() );
if( m_foundItems.ReplaceItem( sheet ) )
{
OnModify();
SaveUndoItemInUndoList( undoItem );
updateFindReplaceView( aEvent );
}
m_foundItems.IncrementIndex();
if( m_foundItems.PassedEnd() )
break;
}
}
else
{
item = (SCH_ITEM*) m_foundItems.GetItem( data );
wxCHECK_RET( item != NULL, wxT( "Invalid replace item in find collector list." ) );
SCH_ITEM* undoItem = data.GetParent();
if( undoItem == NULL )
undoItem = item;
SetUndoItem( undoItem );
sheet = schematic.GetSheetByPath( data.GetSheetPath() );
wxCHECK_RET( sheet != NULL, wxT( "Could not find sheet path " ) + data.GetSheetPath() );
if( m_foundItems.ReplaceItem( sheet ) )
{
OnModify();
SaveUndoItemInUndoList( undoItem );
updateFindReplaceView( aEvent );
}
m_foundItems.IncrementIndex();
nextFoundIndex = m_foundItems.GetFoundIndex();
}
// End the replace if we are at the end if the list. This prevents an infinite loop if
// wrap search is selected and all of the items have been replaced with a value that
// still satisfies the search criteria.
if( m_foundItems.PassedEnd() )
aEvent.SetFlags( aEvent.GetFlags() & ~FR_REPLACE_ITEM_FOUND );
}