void Chamfer::Restore(Base::XMLReader &reader)
{
reader.readElement("Properties");
int Cnt = reader.getAttributeAsInteger("Count");
for (int i=0 ;i<Cnt ;i++) {
reader.readElement("Property");
const char* PropName = reader.getAttribute("name");
const char* TypeName = reader.getAttribute("type");
App::Property* prop = getPropertyByName(PropName);
try {
if (prop && strcmp(prop->getTypeId().getName(), TypeName) == 0) {
prop->Restore(reader);
}
else if (prop && strcmp(TypeName,"App::PropertyFloatConstraint") == 0 &&
strcmp(prop->getTypeId().getName(), "App::PropertyQuantityConstraint") == 0) {
App::PropertyFloatConstraint p;
p.Restore(reader);
static_cast<App::PropertyQuantityConstraint*>(prop)->setValue(p.getValue());
}
}
catch (const Base::XMLParseException&) {
throw; // re-throw
}
catch (const Base::Exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const std::exception &e) {
Base::Console().Error("%s\n", e.what());
}
reader.readEndElement("Property");
}
reader.readEndElement("Properties");
}
void Part2DObject::Restore(Base::XMLReader &reader)
{
//override generic restoration to convert Support property from PropertyLinkSub to PropertyLinkSubList
reader.readElement("Properties");
int Cnt = reader.getAttributeAsInteger("Count");
for (int i=0 ;i<Cnt ;i++) {
reader.readElement("Property");
const char* PropName = reader.getAttribute("name");
const char* TypeName = reader.getAttribute("type");
App::Property* prop = getPropertyByName(PropName);
// NOTE: We must also check the type of the current property because a
// subclass of PropertyContainer might change the type of a property but
// not its name. In this case we would force to read-in a wrong property
// type and the behaviour would be undefined.
try {
if(prop){
if (strcmp(prop->getTypeId().getName(), TypeName) == 0){
prop->Restore(reader);
} else if (prop->isDerivedFrom(App::PropertyLinkSubList::getClassTypeId())){
//reading legacy Support - when the Support could only be a single flat face.
App::PropertyLinkSub tmp;
if (0 == strcmp(tmp.getTypeId().getName(),TypeName)) {
tmp.setContainer(this);
tmp.Restore(reader);
static_cast<App::PropertyLinkSubList*>(prop)->setValue(tmp.getValue(), tmp.getSubValues());
}
this->MapMode.setValue(Attacher::mmFlatFace);
}
}
}
catch (const Base::XMLParseException&) {
throw; // re-throw
}
catch (const Base::Exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const std::exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const char* e) {
Base::Console().Error("%s\n", e);
}
#ifndef FC_DEBUG
catch (...) {
Base::Console().Error("PropertyContainer::Restore: Unknown C++ exception thrown");
}
#endif
reader.readEndElement("Property");
}
reader.readEndElement("Properties");
}
void ProfileBased::Restore(Base::XMLReader& reader) {
reader.readElement("Properties");
int Cnt = reader.getAttributeAsInteger("Count");
for (int i=0 ;i<Cnt ;i++) {
reader.readElement("Property");
const char* PropName = reader.getAttribute("name");
const char* TypeName = reader.getAttribute("type");
App::Property* prop = getPropertyByName(PropName);
// NOTE: We must also check the type of the current property because a
// subclass of PropertyContainer might change the type of a property but
// not its name. In this case we would force to read-in a wrong property
// type and the behaviour would be undefined.
try {
//check if we load the old sketch property
if(!prop && (strcmp("Sketch", PropName) == 0) && (strcmp("App::PropertyLink", TypeName) == 0)) {
std::vector<std::string> vec;
// read my element
reader.readElement("Link");
// get the value of my attribute
std::string name = reader.getAttribute("value");
if (name != "") {
App::Document* document = getDocument();
DocumentObject* object = document ? document->getObject(name.c_str()) : 0;
Profile.setValue(object, vec);
}
else {
Profile.setValue(0, vec);
}
}
else if (prop && strcmp(prop->getTypeId().getName(), TypeName) == 0)
prop->Restore(reader);
}
catch (const Base::XMLParseException&) {
throw; // re-throw
}
catch (const Base::Exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const std::exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const char* e) {
Base::Console().Error("%s\n", e);
}
reader.readEndElement("Property");
}
reader.readEndElement("Properties");
}
void Primitive::Restore(Base::XMLReader &reader)
{
reader.readElement("Properties");
int Cnt = reader.getAttributeAsInteger("Count");
for (int i=0 ;i<Cnt ;i++) {
reader.readElement("Property");
const char* PropName = reader.getAttribute("name");
const char* TypeName = reader.getAttribute("type");
App::Property* prop = getPropertyByName(PropName);
// For #0001652 the property types of many primitive features have changed
// from PropertyFloat or PropertyFloatConstraint to a more meaningful type.
// In order to load older project files there must be checked in case the
// types don't match if both inherit from PropertyFloat because all derived
// classes do not re-implement the Save/Restore methods.
try {
if (prop && strcmp(prop->getTypeId().getName(), TypeName) == 0) {
prop->Restore(reader);
}
else if (prop) {
Base::Type inputType = Base::Type::fromName(TypeName);
if (prop->getTypeId().isDerivedFrom(App::PropertyFloat::getClassTypeId()) &&
inputType.isDerivedFrom(App::PropertyFloat::getClassTypeId())) {
// Do not directly call the property's Restore method in case the implmentation
// has changed. So, create a temporary PropertyFloat object and assign the value.
App::PropertyFloat floatProp;
floatProp.Restore(reader);
static_cast<App::PropertyFloat*>(prop)->setValue(floatProp.getValue());
}
}
}
catch (const Base::XMLParseException&) {
throw; // re-throw
}
catch (const Base::Exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const std::exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const char* e) {
Base::Console().Error("%s\n", e);
}
#ifndef FC_DEBUG
catch (...) {
Base::Console().Error("Primitive::Restore: Unknown C++ exception thrown");
}
#endif
reader.readEndElement("Property");
}
reader.readEndElement("Properties");
}
void Transformed::Restore(Base::XMLReader &reader)
{
reader.readElement("Properties");
int Cnt = reader.getAttributeAsInteger("Count");
for (int i=0 ;i<Cnt ;i++) {
reader.readElement("Property");
const char* PropName = reader.getAttribute("name");
const char* TypeName = reader.getAttribute("type");
App::Property* prop = getPropertyByName(PropName);
// The property 'Angle' of PolarPattern has changed from PropertyFloat
// to PropertyAngle and the property 'Length' has changed to PropertyLength.
try {
if (prop && strcmp(prop->getTypeId().getName(), TypeName) == 0) {
prop->Restore(reader);
}
else if (prop) {
Base::Type inputType = Base::Type::fromName(TypeName);
if (prop->getTypeId().isDerivedFrom(App::PropertyFloat::getClassTypeId()) &&
inputType.isDerivedFrom(App::PropertyFloat::getClassTypeId())) {
// Do not directly call the property's Restore method in case the implmentation
// has changed. So, create a temporary PropertyFloat object and assign the value.
App::PropertyFloat floatProp;
floatProp.Restore(reader);
static_cast<App::PropertyFloat*>(prop)->setValue(floatProp.getValue());
}
}
}
catch (const Base::XMLParseException&) {
throw; // re-throw
}
catch (const Base::Exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const std::exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const char* e) {
Base::Console().Error("%s\n", e);
}
#ifndef FC_DEBUG
catch (...) {
Base::Console().Error("Primitive::Restore: Unknown C++ exception thrown");
}
#endif
reader.readEndElement("Property");
}
reader.readEndElement("Properties");
}
//DVA is still Source PropertyLink so needs different logic vs DV::Restore
void DrawViewArch::Restore(Base::XMLReader &reader)
{
// this is temporary code for backwards compat (within v0.17). can probably be deleted once there are no development
// fcstd files with old property types in use.
reader.readElement("Properties");
int Cnt = reader.getAttributeAsInteger("Count");
for (int i=0 ;i<Cnt ;i++) {
reader.readElement("Property");
const char* PropName = reader.getAttribute("name");
const char* TypeName = reader.getAttribute("type");
App::Property* schemaProp = getPropertyByName(PropName);
try {
if(schemaProp){
if (strcmp(schemaProp->getTypeId().getName(), TypeName) == 0){ //if the property type in obj == type in schema
schemaProp->Restore(reader); //nothing special to do
} else if (strcmp(PropName, "Source") == 0) {
App::PropertyLinkGlobal glink;
App::PropertyLink link;
if (strcmp(glink.getTypeId().getName(),TypeName) == 0) { //property in file is plg
glink.setContainer(this);
glink.Restore(reader);
if (glink.getValue() != nullptr) {
static_cast<App::PropertyLink*>(schemaProp)->setScope(App::LinkScope::Global);
static_cast<App::PropertyLink*>(schemaProp)->setValue(glink.getValue());
}
} else if (strcmp(link.getTypeId().getName(),TypeName) == 0) { //property in file is pl
link.setContainer(this);
link.Restore(reader);
if (link.getValue() != nullptr) {
static_cast<App::PropertyLink*>(schemaProp)->setScope(App::LinkScope::Global);
static_cast<App::PropertyLink*>(schemaProp)->setValue(link.getValue());
}
} else {
// has Source prop isn't PropertyLink or PropertyLinkGlobal!
Base::Console().Log("DrawViewArch::Restore - old Document Source is weird: %s\n", TypeName);
// no idea
}
} else {
Base::Console().Log("DrawViewArch::Restore - old Document has unknown Property\n");
}
}
}
catch (const Base::XMLParseException&) {
throw; // re-throw
}
catch (const Base::Exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const std::exception &e) {
Base::Console().Error("%s\n", e.what());
}
catch (const char* e) {
Base::Console().Error("%s\n", e);
}
#ifndef FC_DEBUG
catch (...) {
Base::Console().Error("PropertyContainer::Restore: Unknown C++ exception thrown\n");
}
#endif
reader.readEndElement("Property");
}
reader.readEndElement("Properties");
}
/**
* This method was added for backward-compatibility. In former versions
* of Box we had the properties x,y,z and l,h,w which have changed to
* Location -- as replacement for x,y and z and Length, Height and Width.
*/
void Box::Restore(Base::XMLReader &reader)
{
reader.readElement("Properties");
int Cnt = reader.getAttributeAsInteger("Count");
bool location_xyz = false;
bool location_axis = false;
bool distance_lhw = false;
Base::Placement plm;
App::PropertyDistance x,y,z;
App::PropertyDistance l,w,h;
App::PropertyVector Axis, Location;
Axis.setValue(0.0f,0.0f,1.0f);
for (int i=0 ;i<Cnt;i++) {
reader.readElement("Property");
const char* PropName = reader.getAttribute("name");
const char* TypeName = reader.getAttribute("type");
App::Property* prop = getPropertyByName(PropName);
if (!prop) {
// in case this comes from an old document we must use the new properties
if (strcmp(PropName, "l") == 0) {
distance_lhw = true;
prop = &l;
}
else if (strcmp(PropName, "w") == 0) {
distance_lhw = true;
prop = &h; // by mistake w was considered as height
}
else if (strcmp(PropName, "h") == 0) {
distance_lhw = true;
prop = &w; // by mistake h was considered as width
}
else if (strcmp(PropName, "x") == 0) {
location_xyz = true;
prop = &x;
}
else if (strcmp(PropName, "y") == 0) {
location_xyz = true;
prop = &y;
}
else if (strcmp(PropName, "z") == 0) {
location_xyz = true;
prop = &z;
}
else if (strcmp(PropName, "Axis") == 0) {
location_axis = true;
prop = &Axis;
}
else if (strcmp(PropName, "Location") == 0) {
location_axis = true;
prop = &Location;
}
}
else if (strcmp(PropName, "Length") == 0 && strcmp(TypeName,"PropertyDistance") == 0) {
distance_lhw = true;
prop = &l;
}
else if (strcmp(PropName, "Height") == 0 && strcmp(TypeName,"PropertyDistance") == 0) {
distance_lhw = true;
prop = &h;
}
else if (strcmp(PropName, "Width") == 0 && strcmp(TypeName,"PropertyDistance") == 0) {
distance_lhw = true;
prop = &w;
}
// NOTE: We must also check the type of the current property because a subclass
// of PropertyContainer might change the type of a property but not its name.
// In this case we would force to read-in a wrong property type and the behaviour
// would be undefined.
std::string tn = TypeName;
if (strcmp(TypeName,"PropertyDistance") == 0) // missing prefix App::
tn = std::string("App::") + tn;
if (prop && strcmp(prop->getTypeId().getName(), tn.c_str()) == 0)
prop->Restore(reader);
reader.readEndElement("Property");
}
if (distance_lhw) {
this->Length.setValue(l.getValue());
this->Height.setValue(h.getValue());
this->Width.setValue(w.getValue());
}
// for 0.7 releases or earlier
if (location_xyz) {
plm.setPosition(Base::Vector3d(x.getValue(),y.getValue(),z.getValue()));
this->Placement.setValue(this->Placement.getValue() * plm);
this->Shape.setStatus(App::Property::User1, true); // override the shape's location later on
}
// for 0.8 releases
else if (location_axis) {
Base::Vector3d d = Axis.getValue();
Base::Vector3d p = Location.getValue();
Base::Rotation rot(Base::Vector3d(0.0,0.0,1.0),
Base::Vector3d(d.x,d.y,d.z));
plm.setRotation(rot);
plm.setPosition(Base::Vector3d(p.x,p.y,p.z));
this->Placement.setValue(this->Placement.getValue() * plm);
this->Shape.setStatus(App::Property::User1, true); // override the shape's location later on
}
reader.readEndElement("Properties");
}