void callback(dynamic_reconfigure::Server<dynamic_reconfigure::TestConfig>& srv, dynamic_reconfigure::TestConfig &config, uint32_t level)
{
ROS_INFO("Reconfigure request : %i %f %s %i %i Group1:%i Group2: %f %s", config.int_, config.double_, config.str_.c_str(), (int) config.bool_, config.level, config.group1_int, config.group2_double, config.group2_string.c_str());
config.int_ |= 1;
config.double_ = -config.double_;
config.str_ += "A";
config.bool_ = !config.bool_;
config.level = level;
dynamic_reconfigure::TestConfig max;
srv.getConfigMax(max);
max.int_ = max.int_ + 1;
srv.setConfigMax(max);
ROS_INFO("TEST");
ROS_INFO("Group 2 requested to be set to %d", config.groups.group_one.group2.state);
ROS_INFO("group2_doube requested to be set to %f", config.groups.group_one.group2.group2_double);
ROS_INFO("Reconfigured to : %i %f %s %i %i", config.int_, config.double_, config.str_.c_str(), (int) config.bool_, config.level);
}
int RosAriaNode::Setup()
{
// Note, various objects are allocated here which are never deleted (freed), since Setup() is only supposed to be
// called once per instance, and these objects need to persist until the process terminates.
robot = new ArRobot();
ArArgumentBuilder *args = new ArArgumentBuilder(); // never freed
ArArgumentParser *argparser = new ArArgumentParser(args); // Warning never freed
argparser->loadDefaultArguments(); // adds any arguments given in /etc/Aria.args. Useful on robots with unusual serial port or baud rate (e.g. pioneer lx)
// Now add any parameters given via ros params (see RosAriaNode constructor):
// if serial port parameter contains a ':' character, then interpret it as hostname:tcpport
// for wireless serial connection. Otherwise, interpret it as a serial port name.
size_t colon_pos = serial_port.find(":");
if (colon_pos != std::string::npos)
{
args->add("-remoteHost"); // pass robot's hostname/IP address to Aria
args->add(serial_port.substr(0, colon_pos).c_str());
//ROS_INFO( "RosAria: using IP: [%s]", serial_port.substr(0, colon_pos).c_str() );
args->add("-remoteRobotTcpPort"); // pass robot's TCP port to Aria
args->add(serial_port.substr(colon_pos+1).c_str());
//ROS_INFO( "RosAria: using port: [%s]", serial_port.substr(colon_pos+1).c_str() );
}
else
{
args->add("-robotPort"); // pass robot's serial port to Aria
args->add(serial_port.c_str());
}
// if a baud rate was specified in baud parameter
if(serial_baud != 0)
{
args->add("-robotBaud");
char tmp[100];
snprintf(tmp, 100, "%d", serial_baud);
args->add(tmp);
}
if( debug_aria )
{
// turn on all ARIA debugging
args->add("-robotLogPacketsReceived"); // log received packets
args->add("-robotLogPacketsSent"); // log sent packets
args->add("-robotLogVelocitiesReceived"); // log received velocities
args->add("-robotLogMovementSent");
args->add("-robotLogMovementReceived");
ArLog::init(ArLog::File, ArLog::Verbose, aria_log_filename.c_str(), true);
}
// Connect to the robot
conn = new ArRobotConnector(argparser, robot); // warning never freed
if (!conn->connectRobot()) {
ROS_ERROR("RosAria: ARIA could not connect to robot! (Check ~port parameter is correct, and permissions on port device.)");
return 1;
}
// causes ARIA to load various robot-specific hardware parameters from the robot parameter file in /usr/local/Aria/params
if(!Aria::parseArgs())
{
ROS_ERROR("RosAria: ARIA error parsing ARIA startup parameters!");
return 1;
}
readParameters();
// Start dynamic_reconfigure server
dynamic_reconfigure_server = new dynamic_reconfigure::Server<rosaria::RosAriaConfig>;
/*
* 横向速度和纵向速度单位为米
*/
/*
* 初始化参数的最小值 其中TickMM=10 DriftFactor=-200 Revount=-32760
*/
// Setup Parameter Minimums
rosaria::RosAriaConfig dynConf_min;
dynConf_min.trans_accel = robot->getAbsoluteMaxTransAccel() / 1000;
dynConf_min.trans_decel = robot->getAbsoluteMaxTransDecel() / 1000;
// TODO: Fix rqt dynamic_reconfigure gui to handle empty intervals
// Until then, set unit length interval.
dynConf_min.lat_accel = ((robot->getAbsoluteMaxLatAccel() > 0.0) ? robot->getAbsoluteMaxLatAccel() : 0.1) / 1000;
dynConf_min.lat_decel = ((robot->getAbsoluteMaxLatDecel() > 0.0) ? robot->getAbsoluteMaxLatDecel() : 0.1) / 1000;
dynConf_min.rot_accel = robot->getAbsoluteMaxRotAccel() * M_PI/180;
dynConf_min.rot_decel = robot->getAbsoluteMaxRotDecel() * M_PI/180;
// I'm setting these upper bounds relitivly arbitrarily, feel free to increase them.
dynConf_min.TicksMM = 10;
dynConf_min.DriftFactor = -200;
dynConf_min.RevCount = -32760;
dynamic_reconfigure_server->setConfigMin(dynConf_min);
// 初始化参数的最大值 其中TickMM=200 DriftFactor=200 Revount=32760
rosaria::RosAriaConfig dynConf_max;
dynConf_max.trans_accel = robot->getAbsoluteMaxTransAccel() / 1000;
dynConf_max.trans_decel = robot->getAbsoluteMaxTransDecel() / 1000;
// TODO: Fix rqt dynamic_reconfigure gui to handle empty intervals
// Until then, set unit length interval.
dynConf_max.lat_accel = ((robot->getAbsoluteMaxLatAccel() > 0.0) ? robot->getAbsoluteMaxLatAccel() : 0.1) / 1000;
dynConf_max.lat_decel = ((robot->getAbsoluteMaxLatDecel() > 0.0) ? robot->getAbsoluteMaxLatDecel() : 0.1) / 1000;
dynConf_max.rot_accel = robot->getAbsoluteMaxRotAccel() * M_PI/180;
dynConf_max.rot_decel = robot->getAbsoluteMaxRotDecel() * M_PI/180;
// I'm setting these upper bounds relitivly arbitrarily, feel free to increase them.
dynConf_max.TicksMM = 200;
dynConf_max.DriftFactor = 200;
dynConf_max.RevCount = 32760;
dynamic_reconfigure_server->setConfigMax(dynConf_max);
// 初始化参数的默认值
rosaria::RosAriaConfig dynConf_default;
dynConf_default.trans_accel = robot->getTransAccel() / 1000;
dynConf_default.trans_decel = robot->getTransDecel() / 1000;
dynConf_default.lat_accel = robot->getLatAccel() / 1000;
dynConf_default.lat_decel = robot->getLatDecel() / 1000;
dynConf_default.rot_accel = robot->getRotAccel() * M_PI/180;
dynConf_default.rot_decel = robot->getRotDecel() * M_PI/180;
dynConf_default.TicksMM = TicksMM;
dynConf_default.DriftFactor = DriftFactor;
dynConf_default.RevCount = RevCount;
dynamic_reconfigure_server->setConfigDefault(dynConf_max);
dynamic_reconfigure_server->setCallback(boost::bind(&RosAriaNode::dynamic_reconfigureCB, this, _1, _2));
// Enable the motors
robot->enableMotors();
// disable sonars on startup
robot->disableSonar();
// callback will be called by ArRobot background processing thread for every SIP data packet received from robot
robot->addSensorInterpTask("ROSPublishingTask", 100, &myPublishCB);
// Initialize bumpers with robot number of bumpers
bumpers.front_bumpers.resize(robot->getNumFrontBumpers());
bumpers.rear_bumpers.resize(robot->getNumRearBumpers());
// Run ArRobot background processing thread
robot->runAsync(true);
return 0;
}
int RosAriaNode::Setup()
{
// Note, various objects are allocated here which are never deleted (freed), since Setup() is only supposed to be
// called once per instance, and these objects need to persist until the process terminates.
robot = new ArRobot();
ArArgumentBuilder *args = new ArArgumentBuilder(); // never freed
ArArgumentParser *argparser = new ArArgumentParser(args); // Warning never freed
argparser->loadDefaultArguments(); // adds any arguments given in /etc/Aria.args. Useful on robots with unusual serial port or baud rate (e.g. pioneer lx)
// Now add any parameters given via ros params (see RosAriaNode constructor):
// if serial port parameter contains a ':' character, then interpret it as hostname:tcpport
// for wireless serial connection. Otherwise, interpret it as a serial port name.
size_t colon_pos = serial_port.find(":");
if (colon_pos != std::string::npos)
{
args->add("-remoteHost"); // pass robot's hostname/IP address to Aria
args->add(serial_port.substr(0, colon_pos).c_str());
args->add("-remoteRobotTcpPort"); // pass robot's TCP port to Aria
args->add(serial_port.substr(colon_pos+1).c_str());
}
else
{
args->add("-robotPort"); // pass robot's serial port to Aria
args->add(serial_port.c_str());
}
// if a baud rate was specified in baud parameter
if(serial_baud != 0)
{
args->add("-robotBaud");
char tmp[100];
snprintf(tmp, 100, "%d", serial_baud);
args->add(tmp);
}
if( debug_aria )
{
// turn on all ARIA debugging
args->add("-robotLogPacketsReceived"); // log received packets
args->add("-robotLogPacketsSent"); // log sent packets
args->add("-robotLogVelocitiesReceived"); // log received velocities
args->add("-robotLogMovementSent");
args->add("-robotLogMovementReceived");
ArLog::init(ArLog::File, ArLog::Verbose, aria_log_filename.c_str(), true);
}
// Connect to the robot
conn = new ArRobotConnector(argparser, robot); // warning never freed
if (!conn->connectRobot()) {
ROS_ERROR("RosAria: ARIA could not connect to robot! (Check ~port parameter is correct, and permissions on port device.)");
return 1;
}
// causes ARIA to load various robot-specific hardware parameters from the robot parameter file in /usr/local/Aria/params
if(!Aria::parseArgs())
{
ROS_ERROR("RosAria: ARIA error parsing ARIA startup parameters!");
return 1;
}
// Start dynamic_reconfigure server
dynamic_reconfigure_server = new dynamic_reconfigure::Server<rosaria::RosAriaConfig>;
robot->lock();
// Setup Parameter Minimums
rosaria::RosAriaConfig dynConf_min;
//arbitrary non-zero values so dynamic reconfigure isn't STUPID
dynConf_min.trans_vel_max = 0.1;
dynConf_min.rot_vel_max = 0.1;
dynConf_min.trans_accel = 0.1;
dynConf_min.trans_decel = 0.1;
dynConf_min.rot_accel = 0.1;
dynConf_min.rot_decel = 0.1;
// I'm setting these upper bounds relitivly arbitrarily, feel free to increase them.
dynConf_min.TicksMM = 10;
dynConf_min.DriftFactor = -200;
dynConf_min.RevCount = -32760;
dynamic_reconfigure_server->setConfigMin(dynConf_min);
rosaria::RosAriaConfig dynConf_max;
dynConf_max.trans_vel_max = robot->getAbsoluteMaxTransVel() / 1000.0;
dynConf_max.rot_vel_max = robot->getAbsoluteMaxRotVel() *M_PI/180.0;
dynConf_max.trans_accel = robot->getAbsoluteMaxTransAccel() / 1000.0;
dynConf_max.trans_decel = robot->getAbsoluteMaxTransDecel() / 1000.0;
dynConf_max.rot_accel = robot->getAbsoluteMaxRotAccel() * M_PI/180.0;
dynConf_max.rot_decel = robot->getAbsoluteMaxRotDecel() * M_PI/180.0;
// I'm setting these upper bounds relitivly arbitrarily, feel free to increase them.
dynConf_max.TicksMM = 200;
dynConf_max.DriftFactor = 200;
dynConf_max.RevCount = 32760;
dynamic_reconfigure_server->setConfigMax(dynConf_max);
dynConf_default.trans_vel_max = robot->getTransVelMax() / 1000.0;
dynConf_default.rot_vel_max = robot->getRotVelMax() *M_PI/180.0;
dynConf_default.trans_accel = robot->getTransAccel() / 1000.0;
dynConf_default.trans_decel = robot->getTransDecel() / 1000.0;
dynConf_default.rot_accel = robot->getRotAccel() * M_PI/180.0;
dynConf_default.rot_decel = robot->getRotDecel() * M_PI/180.0;
/* ROS_ERROR("ON ROBOT NOW\n\
Trans vel max: %f\n\
Rot vel max: %f\n\
\n\
trans accel: %f\n\
trans decel: %f\n\
rot accel: %f\n\
rot decel: %f", robot->getTransVelMax(), robot->getRotVelMax(), robot->getTransAccel(), robot->getTransDecel(), robot->getRotAccel(), robot->getRotDecel());
ROS_ERROR("IN DEFAULT CONFIG\n\
Trans vel max: %f\n\
Rot vel max: %f\n\
\n\
trans accel: %f\n\
trans decel: %f\n\
rot accel: %f\n\
rot decel: %f\n", dynConf_default.trans_vel_max, dynConf_default.rot_vel_max, dynConf_default.trans_accel, dynConf_default.trans_decel, dynConf_default.rot_accel, dynConf_default.rot_decel);*/
TicksMM = robot->getOrigRobotConfig()->getTicksMM();
DriftFactor = robot->getOrigRobotConfig()->getDriftFactor();
RevCount = robot->getOrigRobotConfig()->getRevCount();
dynConf_default.TicksMM = TicksMM;
dynConf_default.DriftFactor = DriftFactor;
dynConf_default.RevCount = RevCount;
dynamic_reconfigure_server->setConfigDefault(dynConf_default);
for(int i = 0; i < 16; i++)
{
sonar_tf_array[i].header.frame_id = frame_id_base_link;
std::stringstream _frame_id;
_frame_id << "sonar" << i;
sonar_tf_array[i].child_frame_id = _frame_id.str();
ArSensorReading* _reading = NULL;
_reading = robot->getSonarReading(i);
sonar_tf_array[i].transform.translation.x = _reading->getSensorX() / 1000.0;
sonar_tf_array[i].transform.translation.y = _reading->getSensorY() / 1000.0;
sonar_tf_array[i].transform.translation.z = 0.19;
sonar_tf_array[i].transform.rotation = tf::createQuaternionMsgFromYaw(_reading->getSensorTh() * M_PI / 180.0);
}
for (int i=0;i<16;i++) {
sensor_msgs::Range r;
ranges.data.push_back(r);
}
int i=0,j=0;
if (sonars__crossed_the_streams) {
i=8;
j=8;
}
for(; i<16; i++) {
//populate the RangeArray msg
std::stringstream _frame_id;
_frame_id << "sonar" << i;
ranges.data[i].header.frame_id = _frame_id.str();
ranges.data[i].radiation_type = 0;
ranges.data[i].field_of_view = 0.2618f;
ranges.data[i].min_range = 0.03f;
ranges.data[i].max_range = 5.0f;
}
// Enable the motors
robot->enableMotors();
robot->disableSonar();
// Initialize bumpers with robot number of bumpers
bumpers.front_bumpers.resize(robot->getNumFrontBumpers());
bumpers.rear_bumpers.resize(robot->getNumRearBumpers());
robot->unlock();
pose_pub = n.advertise<nav_msgs::Odometry>("pose",1000);
bumpers_pub = n.advertise<rosaria::BumperState>("bumper_state",1000);
voltage_pub = n.advertise<std_msgs::Float64>("battery_voltage", 1000);
combined_range_pub = n.advertise<rosaria::RangeArray>("ranges", 1000,
boost::bind(&RosAriaNode::sonarConnectCb,this),
boost::bind(&RosAriaNode::sonarDisconnectCb, this));
for(int i =0; i < 16; i++) {
std::stringstream topic_name;
topic_name << "range" << i;
range_pub[i] = n.advertise<sensor_msgs::Range>(topic_name.str().c_str(), 1000,
boost::bind(&RosAriaNode::sonarConnectCb,this),
boost::bind(&RosAriaNode::sonarDisconnectCb, this));
}
recharge_state_pub = n.advertise<std_msgs::Int8>("battery_recharge_state", 5, true /*latch*/ );
recharge_state.data = -2;
state_of_charge_pub = n.advertise<std_msgs::Float32>("battery_state_of_charge", 100);
motors_state_pub = n.advertise<std_msgs::Bool>("motors_state", 5, true /*latch*/ );
motors_state.data = false;
published_motors_state = false;
// subscribe to services
cmdvel_sub = n.subscribe( "cmd_vel", 1, (boost::function <void(const geometry_msgs::TwistConstPtr&)>)
boost::bind(&RosAriaNode::cmdvel_cb, this, _1 ));
// advertise enable/disable services
enable_srv = n.advertiseService("enable_motors", &RosAriaNode::enable_motors_cb, this);
disable_srv = n.advertiseService("disable_motors", &RosAriaNode::disable_motors_cb, this);
veltime = ros::Time::now();
sonar_tf_timer = n.createTimer(ros::Duration(0.033), &RosAriaNode::sonarCallback, this);
sonar_tf_timer.stop();
dynamic_reconfigure_server->setCallback(boost::bind(&RosAriaNode::dynamic_reconfigureCB, this, _1, _2));
// callback will be called by ArRobot background processing thread for every SIP data packet received from robot
robot->addSensorInterpTask("ROSPublishingTask", 100, &myPublishCB);
// Run ArRobot background processing thread
robot->runAsync(true);
return 0;
}