示例#1
0
// general cortex render function, takes a gu_detail and uses the NodePassData attribute
// to call the required render method
void GR_Cortex::render( GU_Detail *gdp, const IECoreGL::State *displayState )
{
	// gl scene from a parameterised procedural
	const GA_ROAttributeRef attrRef = gdp->findAttribute( GA_ATTRIB_DETAIL, GA_SCOPE_PRIVATE, "IECoreHoudiniNodePassData" );
	if ( attrRef.isInvalid() )
	{
		return;
	}
	
	const GA_Attribute *attr = attrRef.getAttribute();
	const GA_AIFBlindData *blindData = attr->getAIFBlindData();
	const NodePassData passData = blindData->getValue<NodePassData>( attr, 0 );
	
	switch( passData.type() )
	{
		case IECoreHoudini::NodePassData::CORTEX_OPHOLDER :
		{
			SOP_OpHolder *sop = dynamic_cast<SOP_OpHolder*>( const_cast<OP_Node*>( passData.nodePtr() ) );
			if ( !sop )
			{
				return;
			}

			IECore::OpPtr op = IECore::runTimeCast<IECore::Op>( sop->getParameterised() );
			if ( !op )
			{
				return;
			}

			const IECore::Parameter *result_parameter = op->resultParameter();
			const IECore::Object *result_object = result_parameter->getValue();
			renderObject( result_object, displayState );
			break;
		}
		case IECoreHoudini::NodePassData::CORTEX_PROCEDURALHOLDER :
		{
			SOP_ProceduralHolder *sop = dynamic_cast<SOP_ProceduralHolder*>( const_cast<OP_Node*>( passData.nodePtr() ) );
			if ( !sop )
			{
				return;
			}

			IECoreGL::ConstScenePtr scene = sop->scene();
			if ( !scene )
			{
				return;
			}

			scene->render( const_cast<IECoreGL::State *>( displayState ) );
			break;
		}
		default :
		{
			break;
		}
	}
}
示例#2
0
void DrawableHolderUI::draw( const MDrawRequest &request, M3dView &view ) const
{
	MDrawData drawData = request.drawData();
	DrawableHolder *drawableHolder = (DrawableHolder *)drawData.geometry();
	assert( drawableHolder );

	IECoreGL::ConstScenePtr s = drawableHolder->scene();
	if( !s )
	{
		return;
	}

	view.beginGL();

		// maya can sometimes leave an error from it's own code,
		// and we don't want that to confuse us in our drawing code.
		while( glGetError()!=GL_NO_ERROR )
		{
		}

		// if we're being drawn as part of a selection operation we need
		// to make sure there's a name on the name stack, as the IECoreGL::NameStateComponent
		// expects to be able to load a name into it (it fails with an invalid operation if
		// there's no name slot to load into).
		if( view.selectMode() )
		{
			view.pushName( 0 );
		}

		try
		{
			// do the main render
			s->render( m_displayStyle.baseState( request.displayStyle() ) );

			// do a wireframe render over the top if we're selected and we just did a solid
			// draw.
			bool selected = request.displayStatus()==M3dView::kActive || request.displayStatus()==M3dView::kLead;
			bool solid = request.displayStyle()==M3dView::kFlatShaded || request.displayStyle()==M3dView::kGouraudShaded;
			if( selected && solid )
			{
				s->render( m_displayStyle.baseState( M3dView::kWireFrame ) );
			}
		}
		catch( std::exception &e )
		{
			IECore::msg( IECore::Msg::Error, "DrawableHolderUI::draw", e.what() );
		}

	view.endGL();
}
示例#3
0
bool DrawableHolderUI::select( MSelectInfo &selectInfo, MSelectionList &selectionList, MPointArray &worldSpaceSelectPts ) const
{
	MStatus s;

	// early out if we're not selectable. we always allow components to be selected if we're highlighted,
	// but we don't allow ourselves to be selected as a whole unless meshes are in the selection mask.
	// it's not ideal that we act like a mesh, but it's at least consistent with the drawing mask we use.
	if( selectInfo.displayStatus() != M3dView::kHilite )
	{
		MSelectionMask meshMask( MSelectionMask::kSelectMeshes );
		if( !selectInfo.selectable( meshMask ) )
		{
			return false;
		}
	}

	// early out if we have no scene to draw
	DrawableHolder *drawableHolder = static_cast<DrawableHolder *>( surfaceShape() );
	IECoreGL::ConstScenePtr scene = drawableHolder->scene();
	if( !scene )
	{
		return false;
	}

	// we want to perform the selection using an IECoreGL::Selector, so we
	// can avoid the performance penalty associated with using GL_SELECT mode.
	// that means we don't really want to call view.beginSelect(), but we have to
	// call it just to get the projection matrix for our own selection, because as far
	// as i can tell, there is no other way of getting it reliably.

	M3dView view = selectInfo.view();
	view.beginSelect();
	Imath::M44d projectionMatrix;
	glGetDoublev( GL_PROJECTION_MATRIX, projectionMatrix.getValue() );
	view.endSelect();

	view.beginGL();

		glMatrixMode( GL_PROJECTION );
		glLoadMatrixd( projectionMatrix.getValue() );

		IECoreGL::Selector::Mode selectionMode = IECoreGL::Selector::IDRender;
		if( selectInfo.displayStatus() == M3dView::kHilite && !selectInfo.singleSelection() )
		{
			selectionMode = IECoreGL::Selector::OcclusionQuery;
		}

		std::vector<IECoreGL::HitRecord> hits;
		{
			IECoreGL::Selector selector( Imath::Box2f( Imath::V2f( 0 ), Imath::V2f( 1 ) ), selectionMode, hits );

			IECoreGL::State::bindBaseState();
			selector.baseState()->bind();
			scene->render( selector.baseState() );
		}

	view.endGL();

	if( !hits.size() )
	{
		return false;
	}

	// find the depth of the closest hit:
	MIntArray componentIndices;
	float depthMin = std::numeric_limits<float>::max();
	for( int i=0, e = hits.size(); i < e; i++ )
	{
		if( hits[i].depthMin < depthMin )
		{
			depthMin = hits[i].depthMin;
		}
	}


	// figure out the world space location of the closest hit

	MDagPath camera;
	view.getCamera( camera );
	MFnCamera fnCamera( camera.node() );
	float near = fnCamera.nearClippingPlane();
	float far = fnCamera.farClippingPlane();

	float z = -1;
	if( fnCamera.isOrtho() )
	{
		z = Imath::lerp( near, far, depthMin );
	}
	else
	{
		// perspective camera - depth isn't linear so linearise to get z
		float a = far / ( far - near );
		float b = far * near / ( near - far );
		z = b / ( depthMin - a );
	}

	MPoint localRayOrigin;
	MVector localRayDirection;
	selectInfo.getLocalRay( localRayOrigin, localRayDirection );
	MMatrix localToCamera = selectInfo.selectPath().inclusiveMatrix() * camera.inclusiveMatrix().inverse();
	MPoint cameraRayOrigin = localRayOrigin * localToCamera;
	MVector cameraRayDirection = localRayDirection * localToCamera;

	MPoint cameraIntersectionPoint = cameraRayOrigin + cameraRayDirection * ( -( z - near ) / cameraRayDirection.z );
	MPoint worldIntersectionPoint = cameraIntersectionPoint * camera.inclusiveMatrix();

	MSelectionList item;
	item.add( selectInfo.selectPath() );

	selectInfo.addSelection(
		item, worldIntersectionPoint,
		selectionList, worldSpaceSelectPts,
		MSelectionMask::kSelectMeshes,
		false
	);

	return true;
}
示例#4
0
bool ProceduralHolderUI::select( MSelectInfo &selectInfo, MSelectionList &selectionList, MPointArray &worldSpaceSelectPts ) const
{
	MStatus s;

	// early out if we're not selectable. we always allow components to be selected if we're highlighted,
	// but we don't allow ourselves to be selected as a whole unless meshes are in the selection mask.
	// it's not ideal that we act like a mesh, but it's at least consistent with the drawing mask we use.
	if( selectInfo.displayStatus() != M3dView::kHilite )
	{
		MSelectionMask meshMask( MSelectionMask::kSelectMeshes );
		if( !selectInfo.selectable( meshMask ) )
		{
			return false;
		}
	}

	// early out if we have no scene to draw
	ProceduralHolder *proceduralHolder = static_cast<ProceduralHolder *>( surfaceShape() );
	IECoreGL::ConstScenePtr scene = proceduralHolder->scene();
	if( !scene )
	{
		return false;
	}
	
	// we want to perform the selection using an IECoreGL::Selector, so we
	// can avoid the performance penalty associated with using GL_SELECT mode.
	// that means we don't really want to call view.beginSelect(), but we have to
	// call it just to get the projection matrix for our own selection, because as far
	// as i can tell, there is no other way of getting it reliably.
	
	M3dView view = selectInfo.view();
	view.beginSelect();
	Imath::M44d projectionMatrix;
	glGetDoublev( GL_PROJECTION_MATRIX, projectionMatrix.getValue() );
	view.endSelect();
	
	view.beginGL();
	
		glMatrixMode( GL_PROJECTION );
		glLoadMatrixd( projectionMatrix.getValue() );
		
		IECoreGL::Selector::Mode selectionMode = IECoreGL::Selector::IDRender;
		if( selectInfo.displayStatus() == M3dView::kHilite && !selectInfo.singleSelection() )
		{
			selectionMode = IECoreGL::Selector::OcclusionQuery;
		}
		
		std::vector<IECoreGL::HitRecord> hits;
		{
			IECoreGL::Selector selector( Imath::Box2f( Imath::V2f( 0 ), Imath::V2f( 1 ) ), selectionMode, hits );
				
			IECoreGL::State::bindBaseState();
			selector.baseState()->bind();
			scene->render( selector.baseState() );
		
			if( selectInfo.displayStatus() != M3dView::kHilite )
			{
				// we're not in component selection mode. we'd like to be able to select the procedural
				// object using the bounding box so we draw it too.
				MPlug pDrawBound( proceduralHolder->thisMObject(), ProceduralHolder::aDrawBound );
				bool drawBound = true;
				pDrawBound.getValue( drawBound );
				if( drawBound )
				{
					IECoreGL::BoxPrimitive::renderWireframe( IECore::convert<Imath::Box3f>( proceduralHolder->boundingBox() ) );
				}
			}
		}
						
	view.endGL();
	
	if( !hits.size() )
	{
		return false;
	}

	// iterate over the hits, converting them into components and also finding
	// the closest one.
	MIntArray componentIndices;
	float depthMin = std::numeric_limits<float>::max();
	int depthMinIndex = -1;
	for( int i=0, e = hits.size(); i < e; i++ )
	{		
		if( hits[i].depthMin < depthMin )
		{
			depthMin = hits[i].depthMin;
			depthMinIndex = componentIndices.length();
		}
		
		ProceduralHolder::ComponentsMap::const_iterator compIt = proceduralHolder->m_componentsMap.find( hits[i].name.value() );
		assert( compIt != proceduralHolder->m_componentsMap.end() );
		componentIndices.append( compIt->second.first );		
	}
	
	assert( depthMinIndex >= 0 );

	// figure out the world space location of the closest hit
	
	MDagPath camera;
	view.getCamera( camera );
	MFnCamera fnCamera( camera.node() );
	float near = fnCamera.nearClippingPlane();
	float far = fnCamera.farClippingPlane();
	
	float z = -1;
	if( fnCamera.isOrtho() )
	{
		z = Imath::lerp( near, far, depthMin );
	}
	else
	{
		// perspective camera - depth isn't linear so linearise to get z
		float a = far / ( far - near );
		float b = far * near / ( near - far );
		z = b / ( depthMin - a );
	}	
	
	MPoint localRayOrigin;
	MVector localRayDirection;
	selectInfo.getLocalRay( localRayOrigin, localRayDirection );
	MMatrix localToCamera = selectInfo.selectPath().inclusiveMatrix() * camera.inclusiveMatrix().inverse();	
	MPoint cameraRayOrigin = localRayOrigin * localToCamera;
	MVector cameraRayDirection = localRayDirection * localToCamera;
	
	MPoint cameraIntersectionPoint = cameraRayOrigin + cameraRayDirection * ( -( z - near ) / cameraRayDirection.z );
	MPoint worldIntersectionPoint = cameraIntersectionPoint * camera.inclusiveMatrix();
	
	// turn the processed hits into appropriate changes to the current selection
				
	if( selectInfo.displayStatus() == M3dView::kHilite )
	{
		// selecting components
		MFnSingleIndexedComponent fnComponent;
		MObject component = fnComponent.create( MFn::kMeshPolygonComponent, &s ); assert( s );
	
		if( selectInfo.singleSelection() )
		{
			fnComponent.addElement( componentIndices[depthMinIndex] );
		}
		else
		{
			fnComponent.addElements( componentIndices );
		}
		
		MSelectionList items;
		items.add( selectInfo.multiPath(), component );
		
		selectInfo.addSelection(
			items, worldIntersectionPoint,
			selectionList, worldSpaceSelectPts,
			MSelectionMask::kSelectMeshFaces,
			true
		);		
	}
	else
	{
		// selecting objects
		MSelectionList item;
		item.add( selectInfo.selectPath() );

		selectInfo.addSelection(
			item, worldIntersectionPoint,
			selectionList, worldSpaceSelectPts,
			MSelectionMask::kSelectMeshes,
			false
		);
	}
	
	return true;
}
示例#5
0
void ProceduralHolderUI::draw( const MDrawRequest &request, M3dView &view ) const
{
	MStatus s;
	MDrawData drawData = request.drawData();
	ProceduralHolder *proceduralHolder = (ProceduralHolder *)drawData.geometry();
	assert( proceduralHolder );
	
	view.beginGL();
	
	LightingState lightingState;
	bool restoreLightState = cleanupLights( request, view, &lightingState );	

	// maya can sometimes leave an error from it's own code,
	// and we don't want that to confuse us in our drawing code.
	while( glGetError()!=GL_NO_ERROR )
	{
	}

	try
	{
		// draw the bound if asked
		if( request.token()==BoundDrawMode )
		{
			IECoreGL::BoxPrimitive::renderWireframe( IECore::convert<Imath::Box3f>( proceduralHolder->boundingBox() ) );
		}

		// draw the scene if asked
		if( request.token()==SceneDrawMode )
		{
			resetHilites();

			IECoreGL::ConstScenePtr scene = proceduralHolder->scene();
			if( scene )
			{
				IECoreGL::State *displayState = m_displayStyle.baseState( (M3dView::DisplayStyle)request.displayStyle() );

				if ( request.component() != MObject::kNullObj )
				{
					MDoubleArray col;
					s = MGlobal::executeCommand( "colorIndex -q 21", col );
					assert( s );
					IECoreGL::WireframeColorStateComponentPtr hilite = new IECoreGL::WireframeColorStateComponent( Imath::Color4f( col[0], col[1], col[2], 1.0f ) );

					MFnSingleIndexedComponent fnComp( request.component(), &s );
					assert( s );

					int len = fnComp.elementCount( &s );
					assert( s );
					for ( int j = 0; j < len; j++ )
					{
						int compId = fnComp.element(j);

						assert( proceduralHolder->m_componentToGroupMap.find( compId ) != proceduralHolder->m_componentToGroupMap.end() );

						hiliteGroups(
							proceduralHolder->m_componentToGroupMap[compId],
							hilite,
							const_cast<IECoreGL::WireframeColorStateComponent *>( displayState->get< IECoreGL::WireframeColorStateComponent >() )
						);
					}
				}
				scene->render( displayState );
			}
		}
	}
	catch( const IECoreGL::Exception &e )
	{
		// much better to catch and report this than to let the application die
		IECore::msg( IECore::Msg::Error, "ProceduralHolderUI::draw", boost::format( "IECoreGL Exception : %s" ) % e.what() );
	}

	if( restoreLightState )
	{
		restoreLights( &lightingState );	
	}
	
	view.endGL();
}
示例#6
0
bool SceneShapeUI::select( MSelectInfo &selectInfo, MSelectionList &selectionList, MPointArray &worldSpaceSelectPts ) const
{
	MStatus s;

	// early out if we're not selectable. we always allow components to be selected if we're highlighted,
	// but we don't allow ourselves to be selected as a whole unless meshes are in the selection mask.
	// it's not ideal that we act like a mesh, but it's at least consistent with the drawing mask we use.
	if( selectInfo.displayStatus() != M3dView::kHilite )
	{
		MSelectionMask meshMask( MSelectionMask::kSelectMeshes );
		// Apparently selectInfo.selectable() still returns true when meshes are not
		// displayed by the M3dView, so we are also testing the objectDisplay status.
		// This was last confirmed in Maya 2014, and is presumably a Maya bug.
		if( !selectInfo.selectable( meshMask ) || !selectInfo.objectDisplayStatus( M3dView::kDisplayMeshes ) )
		{
			return false;
		}
	}

	// early out if we have no scene to draw
	SceneShape *sceneShape = static_cast<SceneShape *>( surfaceShape() );
	if( !sceneShape->getSceneInterface() )
	{
		return false;
	}

	IECoreGL::ConstScenePtr scene = sceneShape->glScene();
	if( !scene )
	{
		return false;
	}

	// we want to perform the selection using an IECoreGL::Selector, so we
	// can avoid the performance penalty associated with using GL_SELECT mode.
	// that means we don't really want to call view.beginSelect(), but we have to
	// call it just to get the projection matrix for our own selection, because as far
	// as I can tell, there is no other way of getting it reliably.

	M3dView view = selectInfo.view();
	view.beginSelect();
		Imath::M44d projectionMatrix;
		glGetDoublev( GL_PROJECTION_MATRIX, projectionMatrix.getValue() );
	view.endSelect();
		
	view.beginGL();
	
		glMatrixMode( GL_PROJECTION );
		glLoadMatrixd( projectionMatrix.getValue() );
		
		IECoreGL::Selector::Mode selectionMode = IECoreGL::Selector::IDRender;
		if( selectInfo.displayStatus() == M3dView::kHilite && !selectInfo.singleSelection() )
		{
			selectionMode = IECoreGL::Selector::OcclusionQuery;
		}

		std::vector<IECoreGL::HitRecord> hits;
		{
			IECoreGL::Selector selector( Imath::Box2f( Imath::V2f( 0 ), Imath::V2f( 1 ) ), selectionMode, hits );
				
			IECoreGL::State::bindBaseState();
			selector.baseState()->bind();
			scene->render( selector.baseState() );

			if( selectInfo.displayStatus() != M3dView::kHilite )
			{
				// We're not in component selection mode. We'd like to be able to select the scene shape
				// using the bounding box so we draw it too but only if it is visible
				MPlug pDrawBound( sceneShape->thisMObject(), SceneShape::aDrawRootBound );
				bool drawBound;
				pDrawBound.getValue( drawBound );
				if( drawBound )
				{
					IECoreGL::BoxPrimitive::renderWireframe( IECore::convert<Imath::Box3f>( sceneShape->boundingBox() ) );
				}
			}
		}
						
	view.endGL();
	
	if( hits.empty() )
	{
		return false;
	}
	
	// iterate over the hits, converting them into components and also finding
	// the closest one.
	MIntArray componentIndices;
	
	float depthMin = std::numeric_limits<float>::max();
	int depthMinIndex = -1;
	for( unsigned int i=0, e = hits.size(); i < e; i++ )
	{		
		if( hits[i].depthMin < depthMin )
		{
			depthMin = hits[i].depthMin;
			depthMinIndex = componentIndices.length();
		}
		int index = sceneShape->selectionIndex( IECoreGL::NameStateComponent::nameFromGLName( hits[i].name ) );
		componentIndices.append( index );
	}
	
	assert( depthMinIndex >= 0 );

	// figure out the world space location of the closest hit	
	MDagPath camera;
	view.getCamera( camera );
	
	MPoint worldIntersectionPoint;
	selectionRayToWorldSpacePoint( camera, selectInfo, depthMin, worldIntersectionPoint );

	// turn the processed hits into appropriate changes to the current selection
	if( selectInfo.displayStatus() == M3dView::kHilite )
	{
		// selecting components
		MFnSingleIndexedComponent fnComponent;
		MObject component = fnComponent.create( MFn::kMeshPolygonComponent, &s ); assert( s );
	
		if( selectInfo.singleSelection() )
		{
			fnComponent.addElement( componentIndices[depthMinIndex] );
		}
		else
		{
			fnComponent.addElements( componentIndices );
		}
		
		MSelectionList items;
		items.add( selectInfo.multiPath(), component );
		
		MDagPath path = selectInfo.multiPath();

		selectInfo.addSelection(
			items, worldIntersectionPoint,
			selectionList, worldSpaceSelectPts,
			MSelectionMask::kSelectMeshFaces,
			true
		);
		
	}
	else
	{
		// Check if we should be able to select that object
		MPlug pObjectOnly( sceneShape->thisMObject(), SceneShape::aObjectOnly );
		bool objectOnly;
		pObjectOnly.getValue( objectOnly );
		if( objectOnly && !sceneShape->getSceneInterface()->hasObject() )
		{
			return true;
		}
		
		// selecting objects
		MSelectionList item;
		item.add( selectInfo.selectPath() );

		selectInfo.addSelection(
			item, worldIntersectionPoint,
			selectionList, worldSpaceSelectPts,
			MSelectionMask::kSelectMeshes,
			false
		);
	}
	
	return true;
}
示例#7
0
bool SceneShapeUI::snap( MSelectInfo &snapInfo ) const
{
	MStatus s;

	if( snapInfo.displayStatus() != M3dView::kHilite )
	{
		MSelectionMask meshMask( MSelectionMask::kSelectMeshes );
		if( !snapInfo.selectable( meshMask ) )
		{
			return false;
		}
	}

	// early out if we have no scene to draw
	SceneShape *sceneShape = static_cast<SceneShape *>( surfaceShape() );
	const IECore::SceneInterface *sceneInterface = sceneShape->getSceneInterface().get();
	if( !sceneInterface )
	{
		return false;
	}

	IECoreGL::ConstScenePtr scene = sceneShape->glScene();
	if( !scene )
	{
		return false;
	}

	// Get the viewport that the snapping operation is taking place in.
	M3dView view = snapInfo.view();

	// Use an IECoreGL::Selector to find the point in world space that we wish to snap to.
	// We do this by first getting the origin of the selection ray and transforming it into
	// NDC space using the OpenGL projection and transformation matrices. Once we have the
	// point in NDC we can use it to define the viewport that the IECoreGL::Selector will use.

	MPoint localRayOrigin;
	MVector localRayDirection;
	snapInfo.getLocalRay( localRayOrigin, localRayDirection );
	
	Imath::V3d org( localRayOrigin[0], localRayOrigin[1], localRayOrigin[2] );
	MDagPath camera;
	view.getCamera( camera );
	MMatrix localToCamera = snapInfo.selectPath().inclusiveMatrix() * camera.inclusiveMatrix().inverse();
	
	view.beginSelect();
		Imath::M44d projectionMatrix;
		glGetDoublev( GL_PROJECTION_MATRIX, projectionMatrix.getValue() );
	view.endSelect();

	double v[4][4];
	localToCamera.get( v ); 
	Imath::M44d cam( v );
	Imath::V3d ndcPt3d = ( (org * cam ) * projectionMatrix + Imath::V3d( 1. ) ) * Imath::V3d( .5 );
	Imath::V2d ndcPt( std::max( std::min( ndcPt3d[0], 1. ), 0. ), 1. - std::max( std::min( ndcPt3d[1], 1. ), 0. ) );

	view.beginGL();
	
		glMatrixMode( GL_PROJECTION );
		glLoadMatrixd( projectionMatrix.getValue() );
		
		float radius = .001; // The radius of the selection area in NDC.
		double aspect = double( view.portWidth() ) / view.portHeight();
		Imath::V2f selectionWH( radius, radius * aspect );
		
		std::vector<IECoreGL::HitRecord> hits;
		{
			IECoreGL::Selector selector( Imath::Box2f( ndcPt - selectionWH, ndcPt + selectionWH ), IECoreGL::Selector::IDRender, hits );
				
			IECoreGL::State::bindBaseState();
			selector.baseState()->bind();
			scene->render( selector.baseState() );			
		}
				
	view.endGL();

	if( hits.empty() )
	{
		return false;
	}

	// Get the closest mesh hit.	
	float depthMin = std::numeric_limits<float>::max();
	int depthMinIndex = -1;
	for( unsigned int i=0, e = hits.size(); i < e; i++ )
	{		
		if( hits[i].depthMin < depthMin )
		{
			depthMin = hits[i].depthMin;
			depthMinIndex = i;
		}
	}

	// Get the absolute path of the hit object.
	IECore::SceneInterface::Path objPath;
	std::string objPathStr;
	sceneInterface->path( objPath );
	IECore::SceneInterface::pathToString( objPath, objPathStr );
	
	objPathStr += IECoreGL::NameStateComponent::nameFromGLName( hits[depthMinIndex].name );
	IECore::SceneInterface::stringToPath( objPathStr, objPath );

	// Validate the hit selection.
	IECore::ConstSceneInterfacePtr childInterface;
	try
	{
		childInterface = sceneInterface->scene( objPath );
	}
	catch(...)
	{
		return false;
	}

	if( !childInterface )
	{
		return false;
	}
	
	if( !childInterface->hasObject() )
	{
		return false;
	}

	// Get the mesh primitive so that we can query it's vertices.
	double time = sceneShape->time();
	IECore::ConstObjectPtr object = childInterface->readObject( time );
	IECore::ConstMeshPrimitivePtr meshPtr = IECore::runTimeCast<const IECore::MeshPrimitive>( object.get() );
	
	if ( !meshPtr )
	{
		return false;
	}
	
	// Calculate the snap point in object space.
	MPoint worldIntersectionPoint;
	selectionRayToWorldSpacePoint( camera, snapInfo, depthMin, worldIntersectionPoint );
	Imath::V3f pt( worldIntersectionPoint[0], worldIntersectionPoint[1], worldIntersectionPoint[2] );
	Imath::M44f objToWorld( worldTransform( childInterface.get(), time ) );
	pt = pt * objToWorld.inverse();

	// Get the list of vertices in the mesh.
	IECore::V3fVectorData::ConstPtr pointData( meshPtr->variableData<IECore::V3fVectorData>( "P", IECore::PrimitiveVariable::Vertex ) ); 
	const std::vector<Imath::V3f> &vertices( pointData->readable() ); 
	
	// Find the vertex that is closest to the snap point.
	Imath::V3d closestVertex;
	float closestDistance = std::numeric_limits<float>::max(); 
	
	for( std::vector<Imath::V3f>::const_iterator it( vertices.begin() ); it != vertices.end(); ++it )
	{
		Imath::V3d vert( *it );
		float d( ( pt - vert ).length() ); // Calculate the distance between the vertex and the snap point.
		if( d < closestDistance )
		{
			closestDistance = d;
			closestVertex = vert;
		}
	}

	// Snap to the vertex.
	closestVertex *= objToWorld;
	snapInfo.setSnapPoint( MPoint( closestVertex[0], closestVertex[1], closestVertex[2] ) );
	return true;
}
示例#8
0
void SceneShapeUI::draw( const MDrawRequest &request, M3dView &view ) const
{
	MStatus s;
	MDrawData drawData = request.drawData();
	SceneShape *sceneShape = (SceneShape *)drawData.geometry();
	assert( sceneShape );

	view.beginGL();
	
	M3dView::LightingMode lightingMode;
	view.getLightingMode( lightingMode );
	
	LightingState lightingState;
	bool restoreLightState = cleanupLights( request, view, &lightingState );
	
	// maya can sometimes leave an error from it's own code,
	// and we don't want that to confuse us in our drawing code.
	while( glGetError()!=GL_NO_ERROR )
	{
	}

	try
	{
		// draw the bound if asked
		if( request.token()==BoundDrawMode )
		{
			IECoreGL::BoxPrimitive::renderWireframe( IECore::convert<Imath::Box3f>( sceneShape->boundingBox() ) );
		}
		
		// draw the scene if asked
		if( request.token()==SceneDrawMode )
		{
			resetHilites();
			
			IECoreGL::ConstScenePtr scene = sceneShape->glScene();
			if( scene )
			{
				IECoreGL::State *displayState = m_displayStyle.baseState( (M3dView::DisplayStyle)request.displayStyle(), lightingMode );
				
				if ( request.component() != MObject::kNullObj )
				{
					MDoubleArray col;
					s = MGlobal::executeCommand( "colorIndex -q 21", col );
					assert( s );
					IECoreGL::WireframeColorStateComponentPtr hilite = new IECoreGL::WireframeColorStateComponent( Imath::Color4f( col[0], col[1], col[2], 1.0f ) );

					MFnSingleIndexedComponent fnComp( request.component(), &s );
					assert( s );
					
					int len = fnComp.elementCount( &s );
					assert( s );
					std::vector<IECore::InternedString> groupNames;
					for ( int j = 0; j < len; j++ )
					{
						int index = fnComp.element(j);
						groupNames.push_back( sceneShape->selectionName( index ) );
					}
					// Sort by name to make sure we don't unhilite selected items that are further down the hierarchy
					std::sort( groupNames.begin(), groupNames.end() );
					
					for ( std::vector<IECore::InternedString>::iterator it = groupNames.begin(); it!= groupNames.end(); ++it)
					{
						IECoreGL::GroupPtr group = sceneShape->glGroup( *it );

						hiliteGroups(
								group,
								hilite,
								const_cast<IECoreGL::WireframeColorStateComponent *>( displayState->get< IECoreGL::WireframeColorStateComponent >() )
							);
					}
				}
				
				scene->render( displayState );
			}
		}
	}
	catch( const IECoreGL::Exception &e )
	{
		// much better to catch and report this than to let the application die
		IECore::msg( IECore::Msg::Error, "SceneShapeUI::draw", boost::format( "IECoreGL Exception : %s" ) % e.what() );
	}
	
	if( restoreLightState )
	{
		restoreLights( &lightingState );	
	}
	
	view.endGL();
}