Status ModifierInc::log(mutablebson::Element logRoot) const {
// We'd like to create an entry such as {$set: {<fieldname>: <value>}} under 'logRoot'.
// We start by creating the {$set: ...} Element.
mutablebson::Document& doc = logRoot.getDocument();
mutablebson::Element setElement = doc.makeElementObject("$set");
if (!setElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot append log entry for $set mod");
}
// Then we create the {<fieldname>: <value>} Element.
mutablebson::Element logElement = doc.makeElementSafeNum(
_fieldRef.dottedField(),
_preparedState->newValue);
if (!logElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot append details for $set mod");
}
// Now, we attach the {<fieldname>: <value>} Element under the {$set: ...} one.
Status status = setElement.pushBack(logElement);
if (!status.isOK()) {
return status;
}
// And attach the result under the 'logRoot' Element provided.
return logRoot.pushBack(setElement);
}
Status ModifierSet::log(mutablebson::Element logRoot) const {
// We'd like to create an entry such as {$set: {<fieldname>: <value>}} under 'logRoot'.
// We start by creating the {$set: ...} Element.
mutablebson::Document& doc = logRoot.getDocument();
mutablebson::Element setElement = doc.makeElementObject("$set");
if (!setElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot create log entry for $set mod");
}
// Then we create the {<fieldname>: <value>} Element. Note that we log the mod with a
// dotted field, if it was applied over a dotted field. The rationale is that the
// secondary may be in a different state than the primary and thus make different
// decisions about creating the intermediate path in _fieldRef or not.
mutablebson::Element logElement = doc.makeElementWithNewFieldName(_fieldRef.dottedField(),
_val);
if (!logElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot create details for $set mod");
}
// Now, we attach the {<fieldname>: <value>} Element under the {$set: ...} one.
Status status = setElement.pushBack(logElement);
if (!status.isOK()) {
return status;
}
// And attach the result under the 'logRoot' Element provided.
return logRoot.pushBack(setElement);
}
Status ModifierUnset::log(mutablebson::Element logRoot) const {
// We'd like to create an entry such as {$unset: {<fieldname>: 1}} under 'logRoot'.
// We start by creating the {$unset: ...} Element.
mutablebson::Document& doc = logRoot.getDocument();
mutablebson::Element unsetElement = doc.makeElementObject("$unset");
if (!unsetElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot create log entry for $unset mod");
}
// Then we create the {<fieldname>: <value>} Element. Note that <fieldname> must be a
// dotted field, and not only the last part of that field. The rationale here is that
// somoene picking up this log entry -- e.g., a secondary -- must be capable of doing
// the same path find/creation that was done in the previous calls here.
mutablebson::Element logElement = doc.makeElementInt(_fieldRef.dottedField(), 1);
if (!logElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot create log details for $unset mod");
}
// Now, we attach the {<fieldname>: `} Element under the {$unset: ...} one.
Status status = unsetElement.pushBack(logElement);
if (!status.isOK()) {
return status;
}
// And attach the result under the 'logRoot' Element provided.
return logRoot.pushBack(unsetElement);
}
Status ModifierAddToSet::log(mb::Element logRoot) const {
// TODO: This is copied more or less identically from $push. As a result, it copies the
// behavior in $push that relies on 'apply' having been called unless this is a no-op.
// TODO We can log just a positional set in several cases. For now, let's just log the
// full resulting array.
// We'd like to create an entry such as {$set: {<fieldname>: [<resulting aray>]}} under
// 'logRoot'. We start by creating the {$set: ...} Element.
mb::Document& doc = logRoot.getDocument();
mb::Element setElement = doc.makeElementObject("$set");
if (!setElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot create log entry for $addToSet mod");
}
// Then we create the {<fieldname>:[]} Element, that is, an empty array.
mb::Element logElement = doc.makeElementArray(_fieldRef.dottedField());
if (!logElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot create details for $addToSet mod");
}
// Fill up the empty array.
mb::Element curr = _preparedState->elemFound.leftChild();
while (curr.ok()) {
dassert(curr.hasValue());
// We need to copy each array entry from the resulting document to the log
// document.
mb::Element currCopy = doc.makeElementWithNewFieldName(
StringData(),
curr.getValue());
if (!currCopy.ok()) {
return Status(ErrorCodes::InternalError, "could create copy element");
}
Status status = logElement.pushBack(currCopy);
if (!status.isOK()) {
return Status(ErrorCodes::BadValue, "could not append entry for $addToSet log");
}
curr = curr.rightSibling();
}
// Now, we attach the {<fieldname>: [<filled array>]} Element under the {$set: ...}
// one.
Status status = setElement.pushBack(logElement);
if (!status.isOK()) {
return status;
}
// And attach the result under the 'logRoot' Element provided.
return logRoot.pushBack(setElement);
}
Status AuthorizationManager::getBSONForRole(RoleGraph* graph,
const RoleName& roleName,
mutablebson::Element result) {
if (!graph->roleExists(roleName)) {
return Status(ErrorCodes::RoleNotFound,
mongoutils::str::stream() << roleName.getFullName() <<
"does not name an existing role");
}
std::string id = mongoutils::str::stream() << roleName.getDB() << "." << roleName.getRole();
result.appendString("_id", id);
result.appendString(ROLE_NAME_FIELD_NAME, roleName.getRole());
result.appendString(ROLE_SOURCE_FIELD_NAME, roleName.getDB());
// Build privileges array
mutablebson::Element privilegesArrayElement =
result.getDocument().makeElementArray("privileges");
result.pushBack(privilegesArrayElement);
const PrivilegeVector& privileges = graph->getDirectPrivileges(roleName);
Status status = getBSONForPrivileges(privileges, privilegesArrayElement);
if (!status.isOK()) {
return status;
}
// Build roles array
mutablebson::Element rolesArrayElement = result.getDocument().makeElementArray("roles");
result.pushBack(rolesArrayElement);
for (RoleNameIterator roles = graph->getDirectSubordinates(roleName);
roles.more();
roles.next()) {
const RoleName& subRole = roles.get();
mutablebson::Element roleObj = result.getDocument().makeElementObject("");
roleObj.appendString(ROLE_NAME_FIELD_NAME, subRole.getRole());
roleObj.appendString(ROLE_SOURCE_FIELD_NAME, subRole.getDB());
rolesArrayElement.pushBack(roleObj);
}
return Status::OK();
}
Status createPathAt(const FieldRef& prefix,
size_t idxFound,
mutablebson::Element elemFound,
mutablebson::Element newElem) {
Status status = Status::OK();
// Sanity check that 'idxField' is an actual part.
const size_t size = prefix.numParts();
if (idxFound >= size) {
return Status(ErrorCodes::BadValue, "index larger than path size");
}
mutablebson::Document& doc = elemFound.getDocument();
// If we are creating children under an array and a numeric index is next, then perhaps
// we need padding.
size_t i = idxFound;
bool inArray = false;
if (elemFound.getType() == mongol::Array) {
size_t newIdx = 0;
if (!isNumeric(prefix.getPart(idxFound), &newIdx)) {
return Status(ErrorCodes::InvalidPath, "Array require numeric fields");
}
status = maybePadTo(&elemFound, newIdx);
if (!status.isOK()) {
return status;
}
// If there is a next field, that would be an array element. We'd like to mark that
// field because we create array elements differently than we do regular objects.
if (++i < size) {
inArray = true;
}
}
// Create all the remaining parts but the last one.
for (; i < size - 1; i++) {
mutablebson::Element elem = doc.makeElementObject(prefix.getPart(i));
if (!elem.ok()) {
return Status(ErrorCodes::InternalError, "cannot create path");
}
// If this field is an array element, we wrap it in an object (because array
// elements are wraped in { "N": <element> } objects.
if (inArray) {
// TODO pass empty StringData to makeElementObject, when that's supported.
mutablebson::Element arrayObj = doc.makeElementObject("" /* it's an array */);
if (!arrayObj.ok()) {
return Status(ErrorCodes::InternalError, "cannot create item on array");
}
status = arrayObj.pushBack(elem);
if (!status.isOK()) {
return status;
}
status = elemFound.pushBack(arrayObj);
if (!status.isOK()) {
return status;
}
inArray = false;
} else {
status = elemFound.pushBack(elem);
if (!status.isOK()) {
return status;
}
}
elemFound = elem;
}
// Attach the last element. Here again, if we're in a field that is an array element,
// we wrap it in an object first.
if (inArray) {
// TODO pass empty StringData to makeElementObject, when that's supported.
mutablebson::Element arrayObj = doc.makeElementObject("" /* it's an array */);
if (!arrayObj.ok()) {
return Status(ErrorCodes::InternalError, "cannot create item on array");
}
status = arrayObj.pushBack(newElem);
if (!status.isOK()) {
return status;
}
status = elemFound.pushBack(arrayObj);
if (!status.isOK()) {
return status;
}
} else {
status = elemFound.pushBack(newElem);
if (!status.isOK()) {
return status;
}
}
return Status::OK();
}
Status ModifierPull::log(mb::Element logRoot) const {
mb::Document& doc = logRoot.getDocument();
mb::Element opElement = doc.end();
mb::Element logElement = doc.end();
if (!_preparedState->elemFound.ok() ||
_preparedState->idxFound < static_cast<int32_t>(_fieldRef.numParts() - 1)) {
// If we didn't find the element that we wanted to pull from, we log an unset for
// that element.
opElement = doc.makeElementObject("$unset");
if (!opElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot create log entry for $pull mod");
}
logElement = doc.makeElementInt(_fieldRef.dottedField(), 1);
} else {
// TODO: This is copied more or less identically from $push. As a result, it copies the
// behavior in $push that relies on 'apply' having been called unless this is a no-op.
// TODO We can log just a positional unset in several cases. For now, let's just log
// the full resulting array.
// We'd like to create an entry such as {$set: {<fieldname>: [<resulting aray>]}} under
// 'logRoot'. We start by creating the {$set: ...} Element.
opElement = doc.makeElementObject("$set");
if (!opElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot create log entry for $pull mod");
}
// Then we create the {<fieldname>:[]} Element, that is, an empty array.
logElement = doc.makeElementArray(_fieldRef.dottedField());
if (!logElement.ok()) {
return Status(ErrorCodes::InternalError, "cannot create details for $pull mod");
}
mb::Element curr = _preparedState->elemFound.leftChild();
while (curr.ok()) {
dassert(curr.hasValue());
// We need to copy each array entry from the resulting document to the log
// document.
mb::Element currCopy = doc.makeElementWithNewFieldName(
StringData(),
curr.getValue());
if (!currCopy.ok()) {
return Status(ErrorCodes::InternalError, "could create copy element");
}
Status status = logElement.pushBack(currCopy);
if (!status.isOK()) {
return Status(ErrorCodes::BadValue, "could not append entry for $pull log");
}
curr = curr.rightSibling();
}
}
// Now, we attach log element under the op element.
Status status = opElement.pushBack(logElement);
if (!status.isOK()) {
return status;
}
// And attach the result under the 'logRoot' Element provided by the caller.
return logRoot.pushBack(opElement);
}