示例#1
0
void ObjMeshRender::renderNormals(double normalLength)
{
  double diameter = mesh->getDiameter();

  glBegin(GL_LINES);

  for(unsigned int i=0; i < mesh->getNumGroups(); i++)
  {
    const ObjMesh::Group * groupHandle = mesh->getGroupHandle(i);
    for(unsigned int iFace = 0; iFace < groupHandle->getNumFaces(); ++iFace)
    {
      ObjMesh::Face face = groupHandle->getFace(iFace);

      for(unsigned int iVertex = 0; iVertex < face.getNumVertices(); ++iVertex)
      {
        const ObjMesh::Vertex * vertexHandle = face.getVertexHandle(iVertex);
        Vec3d v = mesh->getPosition(*vertexHandle);

        glVertex3d(v[0], v[1], v[2]);

        // compute endpoint
        Vec3d vnormalOffset;
        if(vertexHandle->hasNormalIndex())
          vnormalOffset = v + normalLength * diameter * mesh->getNormal(*vertexHandle);
        else
          vnormalOffset = v;

        glVertex3d(vnormalOffset[0], vnormalOffset[1], vnormalOffset[2]);
      }
    }
  }

  glEnd();
}
示例#2
0
void ObjMeshRender::renderGroupEdges(const char * groupName)
{
  //get the group
  string name(groupName);
  ObjMesh::Group group = mesh->getGroup(name);

  glPolygonMode(GL_FRONT_AND_BACK, GL_LINE);
  glEnable(GL_POLYGON_OFFSET_LINE);
  glPolygonOffset(1.0, 1.0);

  for( unsigned int iFace = 0; iFace < group.getNumFaces(); ++iFace )
  {
    ObjMesh::Face face = group.getFace(iFace);

    glBegin(GL_POLYGON);
    for( unsigned int iVertex = 0; iVertex < face.getNumVertices(); ++iVertex )
    {
      const ObjMesh::Vertex * vertexHandle = face.getVertexHandle(iVertex);
      Vec3d v = mesh->getPosition(*vertexHandle);
      glVertex3d(v[0], v[1], v[2]);
    }
    glEnd();
  }

  glDisable(GL_POLYGON_OFFSET_LINE);
}
示例#3
0
void ObjMeshRender::outputOpenGLRenderCode()
{
  for(unsigned int i=0; i < mesh->getNumGroups(); i++)
  {
    const ObjMesh::Group * groupHandle = mesh->getGroupHandle(i);

    // set material
    ObjMesh::Material material = mesh->getMaterial(groupHandle->getMaterialIndex());

    Vec3d Ka = material.getKa();
    Vec3d Kd = material.getKd();
    Vec3d Ks = material.getKs();
    float shininess = material.getShininess();

    printf("float ambient[4] = { %f, %f, %f, 1.0 };\n", Ka[0], Ka[1], Ka[2]);
    printf("float diffuse[4] = { %f, %f, %f, 1.0 };\n", Kd[0], Kd[1], Kd[2]);
    printf("float specular[4] = { %f, %f, %f, 1.0 };\n", Ks[0], Ks[1], Ks[2]);

    printf("glMaterialfv(GL_FRONT_AND_BACK, GL_AMBIENT, ambient);\n");
    printf("glMaterialfv(GL_FRONT_AND_BACK, GL_DIFFUSE, diffuse);\n");
    printf("glMaterialfv(GL_FRONT_AND_BACK, GL_SPECULAR, specular);\n");
    printf("glMaterialf(GL_FRONT_AND_BACK, GL_SHININESS, %f);\n", shininess);

    for( unsigned int iFace = 0; iFace < groupHandle->getNumFaces(); ++iFace )
    {
      ObjMesh::Face face = groupHandle->getFace(iFace);

      printf("glBegin(GL_POLYGON);\n");

      for( unsigned int iVertex = 0; iVertex < face.getNumVertices(); ++iVertex )
      {
        const ObjMesh::Vertex * vertexHandle = face.getVertexHandle(iVertex);
        Vec3d v = mesh->getPosition(*vertexHandle);

        // set normal
        if( vertexHandle->hasNormalIndex() )
        {
          Vec3d normal = mesh->getNormal(*vertexHandle);
          printf("glNormal3d(%f,%f,%f);\n", normal[0], normal[1], normal[2]);
        }

        // set texture coordinate
        if(vertexHandle->hasTextureCoordinateIndex())
        {
          Vec3d textureCoordinate = mesh->getTextureCoordinate(*vertexHandle);
          printf("glTexCoord2d(%f,%f);\n", textureCoordinate[0], textureCoordinate[1]);
        }

        printf("glVertex3d(%f,%f,%f);\n", v[0],v[1],v[2]);
      }
      printf("glEnd();\n");
    }
  }
}
// returns the number of edges flipped
int ObjMeshOrientable::GenerateHalfEdgeDataStructure()
{
  std::cout << "Building the half edge data structure..." << std::endl;

  // Step 1: iterate over all faces
  // for each face, add all the edges onto the list of half-edges

  std::cout << "Step 1: Generating the list of half edges..." << std::endl;

  typedef std::vector<ObjMesh::Group> SGroup;

  int coutCounter = 0;

  for(unsigned int i = 0; i < objMesh->getNumGroups(); i++ )
  {
    const ObjMesh::Group * currentGroup = objMesh->getGroupHandle(i);

    std::cout << "  Processing obj group '" << currentGroup->getName() << std::endl;
    std::cout << "  Iterating through group faces..." << std::endl;

    for( unsigned int iFace = 0; iFace < currentGroup->getNumFaces(); ++iFace )
    {
      ObjMesh::Face face = currentGroup->getFace(iFace); // get face whose number is iFace

      if (coutCounter < 100)
      {
        std::cout << face.getNumVertices() ;
        coutCounter++;
      }
      if (coutCounter == 100)
      {
        cout << "...[and more]";
        coutCounter++;
      }

      unsigned int edgesSoFar = halfEdges_.size();

      for ( unsigned int iVertex = 0; iVertex < face.getNumVertices(); ++iVertex )
      {
        // create a half edge for each edge, store -1 for half-edge adjacent edge for now
        // index vertices starting from 0
        int nextEdge = edgesSoFar + ((iVertex + 1) % face.getNumVertices());
        HalfEdge halfEdge(edgesSoFar + iVertex, face.getVertex(iVertex).getPositionIndex(), face.getVertex((iVertex + 1) % face.getNumVertices()).getPositionIndex(),
		 	  iVertex, (iVertex + 1) % face.getNumVertices(), i, iFace, -1, nextEdge); 

        halfEdges_.push_back(halfEdge);
      }
    }
    std::cout << std::endl;
  }

/*  
  for (unsigned int i=0; i<halfEdges_.size(); i++)
  {
    cout << "Half edge "<< i << " :" << endl;
    cout << "  Opposite edge: " << halfEdges_[i].opposite() << endl; 
    cout << "  Next edge: " << halfEdges_[i].next() << endl; 
    cout << "  Group: " << halfEdges_[i].groupID() << endl; 
    cout << "  Face: " << halfEdges_[i].face() << endl; 
    cout << "  Start vertex: " << halfEdges_[i].startVertex() << endl; 
    cout << "  End vertex: " << halfEdges_[i].endVertex() << endl; 
    cout << "  Start vertex (local): " << halfEdges_[i].startV() << endl; 
    cout << "  End vertex (local): " << halfEdges_[i].endV() << endl; 
    cout << "  Is boundary: " << halfEdges_[i].isBoundary() << endl; 
  }
*/

  // Step 2: build correspondence among half-dges
  // for each half-edge, search for the opposite half-edge, if it exists

  std::cout << "Step 2: Building correspondence among half-edges..." << std::endl;
  std::cout << "Boundary edges: ";

  // insert all edges into a binary tree

  typedef std::multimap<std::pair< unsigned int, unsigned int > , unsigned int> BinaryTree;
  BinaryTree edges;

  for (unsigned int i=0; i < halfEdges_.size(); i++)
  {
    int vertex1 = halfEdges_[i].startVertex();
    int vertex2 = halfEdges_[i].endVertex();
   
    if (vertex1 == vertex2)
    {
      std::cout << "Error: encountered a degenerated edge with equal starting and ending vertex." << std::endl;
      std::cout << "  Group:" << halfEdges_[i].groupID() << "  Face #: " << halfEdges_[i].face() << "Vertex ID: " << vertex1 << std::endl;
      exit(1);
    }

    if (vertex1 > vertex2) // swap
    {
      int buffer = vertex1;
      vertex1 = vertex2;
      vertex2 = buffer;
    }

    std::pair<unsigned int, unsigned int> vertices(vertex1,vertex2);
    edges.insert(std::make_pair(vertices,i)); 
  }  
 
  // retrieve one by one and build correspondence
  for (unsigned int i=0; i < halfEdges_.size(); i++)
  {
    int vertex1 = halfEdges_[i].startVertex();
    int vertex2 = halfEdges_[i].endVertex();
   
    if (vertex1 > vertex2) // swap
    {
      int buffer = vertex1;
      vertex1 = vertex2;
      vertex2 = buffer;
    }

    std::pair<unsigned int, unsigned int> vertices(vertex1,vertex2);

    // search for the edge

    int hits = 0;
    int candidates = 0;
    BinaryTree::iterator pos;
    for (pos = edges.lower_bound(vertices); 
         pos != edges.upper_bound(vertices);
         ++pos)
    {
      candidates++;
      // check if we found ourselves
      if (pos->second != i) 
      { // not ourselves
        halfEdges_[i].setOpposite(pos->second);
        hits++;
      }
    }

    if (candidates >= 3) 
    {
      std::cout << "Error: encountered an edge that appears in more than two triangles. Geometry is non-manifold. Exiting." << std::endl;
      int faceNum = halfEdges_[i].face();
      std::cout << "  Group:" << halfEdges_[i].groupID() << std::endl << "  Face #: " << faceNum << std::endl;
      std::cout << "  Edge: " << vertex1 << " " << vertex2 << std::endl;
      std::cout << "  Vertices: " << objMesh->getPosition(vertex1) << " " << objMesh->getPosition(vertex2) << std::endl;
      exit(1);
    }

    if (hits == 0) // boundary edge
    {  
      //std::cout << "B"; 
      std::cout << "B(" << vertex1 << "," << vertex2 << ") "; 
      boundaryEdges_.push_back(i);
    }
  }  

  std::cout << " total: " << boundaryEdges_.size() << std::endl;
/*  
  for (unsigned int i=0; i<halfEdges_.size(); i++)
  {
    cout << "Half edge "<< i << " :" << endl;
    cout << "  Opposite edge: " << halfEdges_[i].opposite() << endl; 
    cout << "  Next edge: " << halfEdges_[i].next() << endl; 
    cout << "  Group: " << halfEdges_[i].groupID() << endl; 
    cout << "  Face: " << halfEdges_[i].face() << endl; 
    cout << "  Start vertex: " << halfEdges_[i].startVertex() << endl; 
    cout << "  End vertex: " << halfEdges_[i].endVertex() << endl; 
    cout << "  Start vertex (local): " << halfEdges_[i].startV() << endl; 
    cout << "  End vertex (local): " << halfEdges_[i].endV() << endl; 
    cout << "  Is boundary: " << halfEdges_[i].isBoundary() << endl; 
  }
*/
  // now, each half-edge knows its mirror edge, but orientations of faces might be inconsistent

  // orient all half-edges consistently
  std::cout << "Step 3: Attempting to orient the faces coherently..." << std::endl;

  // generate marks for all the edges
  std::vector<int> marks(halfEdges_.size(), 0);

  // initialize queue
  std::set<int> queue;

  connectedComponents = 0;
  int numOrientationFlips = 0;

  while(1) // breakable
  {
    // find the first un-marked edge and queue it
    unsigned int unmarkedEdge;
    for (unmarkedEdge = 0; unmarkedEdge < halfEdges_.size(); unmarkedEdge++)
    {
      if (marks[unmarkedEdge] == 0)
        break; // found an unmarked edge
    }

    if (unmarkedEdge == halfEdges_.size()) // no unmarked edge was found
    {
      break; // out of while; we are done
    }
    else
    {
      cout << "Found a new connected component. Seed half-edge is: " << unmarkedEdge << endl;
      connectedComponents++;
      queue.insert(unmarkedEdge);

      while(queue.size() > 0)
      {
        int edge = *(queue.begin());
        queue.erase(queue.begin());

        //std::cout << "Retrieved edge from queue: " << edge << " Queue size: " << queue.size() << std::endl;
        //cout << "The edge is boundary: " << halfEdges_[edge].isBoundary() << endl;

        //std::cout << "Marking all the edges on this face: ";
        // first, mark all the edges on this face as visited
        int loop = edge;
        do 
        {
          marks[loop] = 1;
          //std::cout << loop << " ";
          loop = halfEdges_[loop].next();
        }
        while (loop != edge);
        //std::cout << std::endl; 

        // check if edge is consistent with the opposite edge orientation
        // careful: edge might be on the boundary
        // find a non-boundary edge on the same face (if it exists)
        //std::cout << "Seeking for a non-boundary edge on this face...";
        loop = edge;
        int exitFlag = 0;

        while ((halfEdges_[loop].isBoundary()) && (exitFlag == 0))
        {
          //cout << loop << " ";
          loop = halfEdges_[loop].next();
          if (loop == edge) // all edges are boundary
            exitFlag = 1;
        }

        if (exitFlag == 1) // all edges are boundary; this is an isolated face
        {
          cout << "Encountered an isolated face." << endl;
          //cout << "none found." << endl;
          continue; // no need to queue anything or flip anything, this was an isolated face
          // also, this case can only happen during the first iteration of the while loop, which will also be the last one
        }

        edge = loop; // now, edge is a non-boundary halfedge

        //std::cout << "found non-boundary edge: " << edge << std::endl;
        //std::cout << "opposite edge is: " << halfEdges_[edge].opposite() << std::endl;

        bool orientationFlipNecessary = (marks[halfEdges_[edge].opposite()] == 1) && (halfEdges_[edge].startVertex() == (edgeOpposite(halfEdges_[edge])).startVertex());

        //std::cout << "Orientation flip necessary for this face: " << orientationFlipNecessary << std::endl;

        if (orientationFlipNecessary) 
        { 
          // flip all edges along this face
          //cout << "Orientation flip" << endl;
          numOrientationFlips++;
          loop = edge;
          int cache = 0;
          do
          {
            int nextO = halfEdges_[loop].next();
            halfEdges_[loop].setNext(cache);
            cache = loop;
            halfEdges_[loop].flipOrientation(); // flip orientation
            loop = nextO;
          }
          while (loop != edge);
          halfEdges_[loop].setNext(cache);

          int groupID = halfEdges_[loop].groupID();
          int faceID = halfEdges_[loop].face();

          ObjMesh::Group * currentGroup = (ObjMesh::Group*) objMesh->getGroupHandle(groupID);
          currentGroup->getFace(faceID).printVertices();
          currentGroup->reverseFace(faceID);
          currentGroup->getFace(faceID).printVertices();
        }

        // check if new orientation is consistent eveywhere along the face
        // if not, surface is not orientable
        // at the same time, queue the opposite edges if they are not marked already
        loop = edge;
        do
        {
          if (!halfEdges_[loop].isBoundary()) // skip boundary edges
          {
            // if opposite unmarked, queue the opposite edge 
            if (marks[halfEdges_[loop].opposite()] == 0)
            {
              queue.insert(halfEdges_[loop].opposite());
              //marks[halfEdges_[loop].opposite()] = 1; // JNB, 2008
              //std::cout << "visiting edge: " << loop << " pushing opposite: " << halfEdges_[loop].opposite() << std::endl;
            }
            else
            { 
              // opposite edge is marked as already visited
              // if orientation consistent, do nothing 
              // if orientation not consistent, surface is not orientable
        
              bool orientationConsistent = (halfEdges_[loop].startVertex() == (edgeOpposite(halfEdges_[loop])).endVertex()); 

              //std::cout << "visiting edge: " << loop << " opposite marked " << std::endl;

              if (!orientationConsistent)
              {
                std::cout << "Error: surface is non-orientable. Offending edge: [" << halfEdges_[loop].startVertex() << "," << halfEdges_[loop].endVertex() << "]" << std::endl;
                exit(1);
              }
            }
          }
          loop = halfEdges_[loop].next();
        }
        while (loop != edge);

      }
    }
  } // end of while  

  printf("Consistent orientation generated. Performed %d orientation flips.\n", numOrientationFlips);

  //PrintHalfEdges();

  // step 4: for every vertex, find a half-edge emanating out of it
  std::cout << "Step 4: For every vertex, caching a half-edge emanating out of it..." << std::endl;
  std::cout << "        For every face, caching a half-edge on it..." << std::endl;

  for (unsigned int i=0; i< objMesh->getNumVertices(); i++)
    edgesAtVertices_.push_back(-1); // value of -1 corresponds to no edge (i.e. isolated vertex)

  for (unsigned int i=0; i < halfEdges_.size(); i++)
  {
    //cout << i << " " << halfEdges_[i].startVertex() << " " << halfEdges_[i].endVertex() << endl;
    edgesAtVertices_[halfEdges_[i].endVertex()] = i;
  }

  // if vertex is on the boundary, rotate the edge until it is an incoming boundary edge
  // rotate edge until it is either on the boundary, or we come around to the same edge
  int numIsolatedVertices = 0;
  for (unsigned int i=0; i < objMesh->getNumVertices(); i++)
  {
    if (isIsolatedVertex(i))
    {
      numIsolatedVertices++;
      continue;
    }
    HalfEdge * loop = &edgeAtVertex(i);
    HalfEdge * start = loop; 
    do
    {
      if (loop->isBoundary())
      {
        // set the edge to the current edge
        edgesAtVertices_[i] = loop->position();
        break;
      }
      loop = &edgePrevious(edgeOpposite(*loop));
    }
    while (*loop != *start);
    // if we came around, no need to change edgeAtVertices[i]
  } 

  if (numIsolatedVertices > 0)
    printf("Warning: mesh has %d isolated vertices.\n", numIsolatedVertices);

  // build the cache for faces, first reset to -1
  for (unsigned int i=0; i < objMesh->getNumGroups(); i++)
  {
    const ObjMesh::Group * currentGroup = objMesh->getGroupHandle(i);
    std::vector<int> dataForThisGroup;
    dataForThisGroup.clear();
    for (unsigned int j=0; j < currentGroup->getNumFaces(); j++)
    { 
      dataForThisGroup.push_back(-1);
    }
    edgesAtFaces_.push_back(dataForThisGroup);
  }   
  for (unsigned int i=0; i < halfEdges_.size(); i++)
    edgesAtFaces_[halfEdges_[i].groupID()][halfEdges_[i].face()] = i;

  // sanity check: none of the face entries should be -1
  for (unsigned int i=0; i < objMesh->getNumGroups(); i++)
  {
    const ObjMesh::Group * currentGroup = objMesh->getGroupHandle(i);
    for (unsigned int j=0; j < currentGroup->getNumFaces(); j++)
      if (edgesAtFaces_[i][j] == -1)
        cout << "Warning: face on group " << i << "(" << currentGroup->getName() << "), position " << j << " has no edges." << endl;
  }

  determineIfSurfaceHasBoundary();

  // testing: previous edge capability
  /*
  cout << "Testing previous edge capability..." << endl;
  for (unsigned int i=0; i < halfEdges_.size(); i++)
  {
    cout << i << ": " << edgePrevious(halfEdges_[i]).position() << endl;
  }

  // testing: print out associated edges for every vertex
  for (unsigned int i=0; i < vertexPositions_.size(); i++)
  {
    cout << "Halfedge into vertex " << i << ": " << edgeAtVertex(i).position() << endl;
  }
 
  // testing: print out associated edges for every face
  for (unsigned int i=0; i < groups_.size(); i++)
    for (unsigned int j=0; j < groups_[i].getNumFaces(); j++)
    {
      cout << "Halfedge on face " << i << " " << j << ": " << edgeAtFace(i,j).position() << endl;
    }

  // testing: loop around every vertex
  for (unsigned int i=0; i < vertexPositions_.size(); i++)
  {
    cout << "Looping around vertex " << i << ":"; 
    int flag = 0;
    HalfEdge * start = &edgeAtVertex(i);
    HalfEdge * loop = start;
    do 
    {
      cout << loop->position() << " ";

      if (flag != 0) // boundary edge, exit the loop
      {
        cout << " B";
        break;
      }
      loop = &loopVertex(*loop,flag);
    }
    while (loop->position() != start->position());

    cout << endl;
  }
  */

  std::cout << "Half-edge datastructure constructed successfully." << std::endl;

  std::cout << "Statistics: " << std::endl;
  std::cout << "  Half-edges: " << halfEdges_.size() << std::endl;
  std::cout << "  Boundary half-edges: " << boundaryEdges_.size() << std::endl;
  std::cout << "  Connected components: " << connectedComponents << std::endl;
  
  return numOrientationFlips;
}