bool SystemZDAGToDAGISel::SelectAddrRI12(SDNode *Op, SDValue& Addr,
SDValue &Base, SDValue &Disp,
bool is12BitOnly) {
SystemZRRIAddressMode AM20(/*isRI*/true), AM12(/*isRI*/true);
bool Done = false;
if (!Addr.hasOneUse()) {
unsigned Opcode = Addr.getOpcode();
if (Opcode != ISD::Constant && Opcode != ISD::FrameIndex) {
// If we are able to fold N into addressing mode, then we'll allow it even
// if N has multiple uses. In general, addressing computation is used as
// addresses by all of its uses. But watch out for CopyToReg uses, that
// means the address computation is liveout. It will be computed by a LA
// so we want to avoid computing the address twice.
for (SDNode::use_iterator UI = Addr.getNode()->use_begin(),
UE = Addr.getNode()->use_end(); UI != UE; ++UI) {
if (UI->getOpcode() == ISD::CopyToReg) {
MatchAddressBase(Addr, AM12);
Done = true;
break;
}
}
}
}
if (!Done && MatchAddress(Addr, AM12, /* is12Bit */ true))
return false;
// Check, whether we can match stuff using 20-bit displacements
if (!Done && !is12BitOnly &&
!MatchAddress(Addr, AM20, /* is12Bit */ false))
if (AM12.Disp == 0 && AM20.Disp != 0)
return false;
DEBUG(errs() << "MatchAddress (final): "; AM12.dump());
EVT VT = Addr.getValueType();
if (AM12.BaseType == SystemZRRIAddressMode::RegBase) {
if (!AM12.Base.Reg.getNode())
AM12.Base.Reg = CurDAG->getRegister(0, VT);
}
assert(AM12.IndexReg.getNode() == 0 && "Invalid reg-imm address mode!");
getAddressOperandsRI(AM12, Base, Disp);
return true;
}
/// Returns true if the address can be represented by a base register plus
/// index register plus a signed 20-bit displacement [base + idx + imm].
bool SystemZDAGToDAGISel::SelectAddrRRI20(SDNode *Op, SDValue Addr,
SDValue &Base, SDValue &Disp, SDValue &Index) {
SystemZRRIAddressMode AM;
bool Done = false;
if (!Addr.hasOneUse()) {
unsigned Opcode = Addr.getOpcode();
if (Opcode != ISD::Constant && Opcode != ISD::FrameIndex) {
// If we are able to fold N into addressing mode, then we'll allow it even
// if N has multiple uses. In general, addressing computation is used as
// addresses by all of its uses. But watch out for CopyToReg uses, that
// means the address computation is liveout. It will be computed by a LA
// so we want to avoid computing the address twice.
for (SDNode::use_iterator UI = Addr.getNode()->use_begin(),
UE = Addr.getNode()->use_end(); UI != UE; ++UI) {
if (UI->getOpcode() == ISD::CopyToReg) {
MatchAddressBase(Addr, AM);
Done = true;
break;
}
}
}
}
if (!Done && MatchAddress(Addr, AM, /* is12Bit */ false))
return false;
DEBUG(errs() << "MatchAddress (final): "; AM.dump());
EVT VT = Addr.getValueType();
if (AM.BaseType == SystemZRRIAddressMode::RegBase) {
if (!AM.Base.Reg.getNode())
AM.Base.Reg = CurDAG->getRegister(0, VT);
}
if (!AM.IndexReg.getNode())
AM.IndexReg = CurDAG->getRegister(0, VT);
getAddressOperands(AM, Base, Disp, Index);
return true;
}
// Note: branch conditions, by definition, only have a chain user.
// This is why it should not be saved in a map for recall.
Value* ARMIREmitter::visitBRCOND(const SDNode *N) {
// Get the address
const ConstantSDNode *DestNode = dyn_cast<ConstantSDNode>(N->getOperand(0));
if (!DestNode) {
printError("visitBRCOND: Not a constant integer for branch!");
return NULL;
}
uint64_t DestInt = DestNode->getSExtValue();
uint64_t PC = Dec->getDisassembler()->getDebugOffset(N->getDebugLoc());
// Note: pipeline is 8 bytes
uint64_t Tgt = PC + 8 + DestInt;
Function *F = IRB->GetInsertBlock()->getParent();
BasicBlock *CurBB = IRB->GetInsertBlock();
BasicBlock *BBTgt = Dec->getOrCreateBasicBlock(Tgt, F);
// Parse the branch condition code
const ConstantSDNode *CCNode = dyn_cast<ConstantSDNode>(N->getOperand(1));
if (!CCNode) {
printError("visitBRCOND: Condition code is not a constant integer!");
return NULL;
}
ARMCC::CondCodes ARMcc = ARMCC::CondCodes(CCNode->getZExtValue());
// Unconditional branch
if (ARMcc == ARMCC::AL) {
Instruction *Br = IRB->CreateBr(BBTgt);
Br->setDebugLoc(N->getDebugLoc());
return Br;
}
// If not a conditional branch, find the successor block and look at CC
BasicBlock *NextBB = NULL;
Function::iterator BI = F->begin(), BE= F->end();
while (BI != BE && BI->getName() != CurBB->getName()) ++BI;
++BI;
if (BI == BE) { // NOTE: This should never happen...
NextBB = Dec->getOrCreateBasicBlock("end", F);
} else {
NextBB = &(*BI);
}
SDNode *CPSR = N->getOperand(2)->getOperand(1).getNode();
SDNode *CMPNode = NULL;
for (SDNode::use_iterator I = CPSR->use_begin(), E = CPSR->use_end(); I != E;
++I) {
if (I->getOpcode() == ISD::CopyToReg) {
CMPNode = I->getOperand(2).getNode();
}
}
if (CMPNode == NULL) {
errs() << "ARMIREmitter ERROR: Could not find CMP SDNode for ARMBRCond!\n";
return NULL;
}
Value *Cmp = NULL;
Value *LHS = visit(CMPNode->getOperand(0).getNode());
Value *RHS = visit(CMPNode->getOperand(1).getNode());
// See ARMCC::CondCodes IntCCToARMCC(ISD::CondCode CC); in ARMISelLowering.cpp
// TODO: Add support for conditions that handle floating point
switch(ARMcc) {
default:
printError("Unknown condition code");
return NULL;
case ARMCC::EQ:
Cmp = IRB->CreateICmpEQ(LHS, RHS);
break;
case ARMCC::NE:
Cmp = IRB->CreateICmpNE(LHS, RHS);
break;
case ARMCC::HS:
// HS - unsigned higher or same (or carry set)
Cmp = IRB->CreateICmpUGE(LHS, RHS);
break;
case ARMCC::LO:
// LO - unsigned lower (or carry clear)
Cmp = IRB->CreateICmpULT(LHS, RHS);
break;
case ARMCC::MI:
// MI - minus (negative)
printError("Condition code MI is not handled at this time!");
return NULL;
// break;
case ARMCC::PL:
// PL - plus (positive or zero)
printError("Condition code PL is not handled at this time!");
return NULL;
// break;
case ARMCC::VS:
// VS - V Set (signed overflow)
printError("Condition code VS is not handled at this time!");
return NULL;
// break;
case ARMCC::VC:
// VC - V clear (no signed overflow)
printError("Condition code VC is not handled at this time!");
return NULL;
// break;
case ARMCC::HI:
// HI - unsigned higher
Cmp = IRB->CreateICmpUGT(LHS, RHS);
break;
case ARMCC::LS:
// LS - unsigned lower or same
Cmp = IRB->CreateICmpULE(LHS, RHS);
break;
case ARMCC::GE:
// GE - signed greater or equal
Cmp = IRB->CreateICmpSGE(LHS, RHS);
break;
case ARMCC::LT:
// LT - signed less than
Cmp = IRB->CreateICmpSLT(LHS, RHS);
break;
case ARMCC::GT:
// GT - signed greater than
Cmp = IRB->CreateICmpSGT(LHS, RHS);
break;
case ARMCC::LE:
// LE - signed less than or equal
Cmp = IRB->CreateICmpSLE(LHS, RHS);
break;
}
(dyn_cast<Instruction>(Cmp))->setDebugLoc(N->getOperand(2)->getDebugLoc());
// Conditional branch
Instruction *Br = IRB->CreateCondBr(Cmp, BBTgt, NextBB);
Br->setDebugLoc(N->getDebugLoc());
return Br;
}
