bool mitk::MeshMitkLoader::canLoad()
{
Surface::Pointer surface = GetData<Surface>(m_filename.getValue());
if (surface.IsNull())
return false;
vtkPolyData* polyData = surface->GetVtkPolyData();
if (polyData == nullptr || polyData->GetNumberOfCells() == 0)
return false;
return true;
}
void mitk::SurfaceGLMapper2D::SetDataNode( mitk::DataNode* node )
{
Superclass::SetDataNode( node );
bool useCellData;
if (dynamic_cast<BoolProperty *>(node->GetProperty("deprecated useCellDataForColouring")) == NULL)
useCellData = false;
else
useCellData = dynamic_cast<BoolProperty *>(node->GetProperty("deprecated useCellDataForColouring"))->GetValue();
if (!useCellData)
{
// search min/max point scalars over all time steps
double dataRange[2] = {0,0};
double range[2];
Surface::Pointer input = const_cast< Surface* >(dynamic_cast<const Surface*>( this->GetDataNode()->GetData() ));
if(input.IsNull()) return;
const TimeGeometry::Pointer inputTimeGeometry = input->GetTimeGeometry();
if(( inputTimeGeometry.IsNull() ) || ( inputTimeGeometry->CountTimeSteps() == 0 ) ) return;
for (unsigned int timestep=0; timestep<inputTimeGeometry->CountTimeSteps(); timestep++)
{
vtkPolyData * vtkpolydata = input->GetVtkPolyData( timestep );
if((vtkpolydata==NULL) || (vtkpolydata->GetNumberOfPoints() < 1 )) continue;
vtkDataArray *vpointscalars = vtkpolydata->GetPointData()->GetScalars();
if (vpointscalars) {
vpointscalars->GetRange( range, 0 );
if (dataRange[0]==0 && dataRange[1]==0) {
dataRange[0] = range[0];
dataRange[1] = range[1];
}
else {
if (range[0] < dataRange[0]) dataRange[0] = range[0];
if (range[1] > dataRange[1]) dataRange[1] = range[1];
}
}
}
if (dataRange[1] - dataRange[0] > 0) {
m_LUT->SetTableRange( dataRange );
m_LUT->Build();
}
}
}
void mitk::SurfaceGLMapper2D::Paint(mitk::BaseRenderer * renderer)
{
bool visible = true;
GetDataNode()->GetVisibility(visible, renderer, "visible");
if(!visible) return;
Surface::Pointer input = const_cast<Surface*>(this->GetInput());
if(input.IsNull())
return;
//
// get the TimeGeometry of the input object
//
const TimeGeometry* inputTimeGeometry = input->GetTimeGeometry();
if(( inputTimeGeometry == NULL ) || ( inputTimeGeometry->CountTimeSteps() == 0 ) )
return;
m_LineWidth = 1;
GetDataNode()->GetIntProperty("line width", m_LineWidth, renderer);
//
// get the world time
//
ScalarType time =renderer->GetTime();
int timestep=0;
if( time > itk::NumericTraits<mitk::ScalarType>::NonpositiveMin() )
timestep = inputTimeGeometry->TimePointToTimeStep( time );
// int timestep = this->GetTimestep();
if( inputTimeGeometry->IsValidTimeStep( timestep ) == false )
return;
vtkPolyData * vtkpolydata = input->GetVtkPolyData( timestep );
if((vtkpolydata==NULL) || (vtkpolydata->GetNumberOfPoints() < 1 ))
return;
//apply color and opacity read from the PropertyList
this->ApplyAllProperties(renderer);
if (m_DrawNormals)
{
m_PointLocator->SetDataSet( vtkpolydata );
m_PointLocator->BuildLocatorFromPoints( vtkpolydata->GetPoints() );
}
if(vtkpolydata!=NULL)
{
Point3D point;
Vector3D normal;
//Check if Lookup-Table is already given, else use standard one.
double* scalarLimits = m_LUT->GetTableRange();
double scalarsMin = scalarLimits[0], scalarsMax = scalarLimits[1];
vtkLookupTable *lut;
LookupTableProperty::Pointer lookupTableProp;
this->GetDataNode()->GetProperty(lookupTableProp, "LookupTable", renderer);
if (lookupTableProp.IsNotNull() )
{
lut = lookupTableProp->GetLookupTable()->GetVtkLookupTable();
GetDataNode()->GetDoubleProperty("ScalarsRangeMinimum", scalarsMin, renderer);
GetDataNode()->GetDoubleProperty("ScalarsRangeMaximum", scalarsMax, renderer);
// check if the scalar range has been changed, e.g. manually, for the data tree node, and rebuild the LUT if necessary.
double* oldRange = lut->GetTableRange();
if( oldRange[0] != scalarsMin || oldRange[1] != scalarsMax )
{
lut->SetTableRange(scalarsMin, scalarsMax);
lut->Build();
}
}
else
{
lut = m_LUT;
}
vtkLinearTransform * vtktransform = GetDataNode()->GetVtkTransform(timestep);
PlaneGeometry::ConstPointer worldGeometry = renderer->GetCurrentWorldPlaneGeometry();
assert( worldGeometry.IsNotNull() );
if (worldGeometry.IsNotNull())
{
// set up vtkPlane according to worldGeometry
point=worldGeometry->GetOrigin();
normal=worldGeometry->GetNormal(); normal.Normalize();
m_Plane->SetTransform((vtkAbstractTransform*)NULL);
}
else
{
AbstractTransformGeometry::ConstPointer worldAbstractGeometry = dynamic_cast<const AbstractTransformGeometry*>(renderer->GetCurrentWorldPlaneGeometry());
if(worldAbstractGeometry.IsNotNull())
{
AbstractTransformGeometry::ConstPointer surfaceAbstractGeometry = dynamic_cast<const AbstractTransformGeometry*>(input->GetTimeGeometry()->GetGeometryForTimeStep(0).GetPointer());
if(surfaceAbstractGeometry.IsNotNull()) //@todo substitude by operator== after implementation, see bug id 28
{
PaintCells(renderer, vtkpolydata, worldGeometry, renderer->GetDisplayGeometry(), vtktransform, lut);
return;
}
else
{
//@FIXME: does not work correctly. Does m_Plane->SetTransform really transforms a "flat plane" into a "curved plane"?
return;
// set up vtkPlane according to worldGeometry
point=const_cast<BoundingBox*>(worldAbstractGeometry->GetParametricBoundingBox())->GetMinimum();
FillVector3D(normal, 0, 0, 1);
m_Plane->SetTransform(worldAbstractGeometry->GetVtkAbstractTransform()->GetInverse());
}
}
else
return;
}
double vp[3], vnormal[3];
vnl2vtk(point.GetVnlVector(), vp);
vnl2vtk(normal.GetVnlVector(), vnormal);
//normally, we would need to transform the surface and cut the transformed surface with the cutter.
//This might be quite slow. Thus, the idea is, to perform an inverse transform of the plane instead.
//@todo It probably does not work for scaling operations yet:scaling operations have to be
//dealed with after the cut is performed by scaling the contour.
vtkLinearTransform * inversetransform = vtktransform->GetLinearInverse();
inversetransform->TransformPoint(vp, vp);
inversetransform->TransformNormalAtPoint(vp, vnormal, vnormal);
m_Plane->SetOrigin(vp);
m_Plane->SetNormal(vnormal);
//set data into cutter
m_Cutter->SetInputData(vtkpolydata);
m_Cutter->Update();
// m_Cutter->GenerateCutScalarsOff();
// m_Cutter->SetSortByToSortByCell();
if (m_DrawNormals)
{
m_Stripper->SetInputData( m_Cutter->GetOutput() );
// calculate the cut
m_Stripper->Update();
PaintCells(renderer, m_Stripper->GetOutput(), worldGeometry, renderer->GetDisplayGeometry(), vtktransform, lut, vtkpolydata);
}
else
{
PaintCells(renderer, m_Cutter->GetOutput(), worldGeometry, renderer->GetDisplayGeometry(), vtktransform, lut, vtkpolydata);
}
}
}
