示例#1
0
void llvm::PointerMayBeCaptured(const Value *V, CaptureTracker *Tracker) {
  assert(V->getType()->isPointerTy() && "Capture is for pointers only!");
  SmallVector<Use*, Threshold> Worklist;
  SmallSet<Use*, Threshold> Visited;
  int Count = 0;

  for (Value::const_use_iterator UI = V->use_begin(), UE = V->use_end();
       UI != UE; ++UI) {
    // If there are lots of uses, conservatively say that the value
    // is captured to avoid taking too much compile time.
    if (Count++ >= Threshold)
      return Tracker->tooManyUses();

    Use *U = &UI.getUse();
    if (!Tracker->shouldExplore(U)) continue;
    Visited.insert(U);
    Worklist.push_back(U);
  }

  while (!Worklist.empty()) {
    Use *U = Worklist.pop_back_val();
    Instruction *I = cast<Instruction>(U->getUser());
    V = U->get();

    switch (I->getOpcode()) {
    case Instruction::Call:
    case Instruction::Invoke: {
      CallSite CS(I);
      // Not captured if the callee is readonly, doesn't return a copy through
      // its return value and doesn't unwind (a readonly function can leak bits
      // by throwing an exception or not depending on the input value).
      if (CS.onlyReadsMemory() && CS.doesNotThrow() && I->getType()->isVoidTy())
        break;

      // Not captured if only passed via 'nocapture' arguments.  Note that
      // calling a function pointer does not in itself cause the pointer to
      // be captured.  This is a subtle point considering that (for example)
      // the callee might return its own address.  It is analogous to saying
      // that loading a value from a pointer does not cause the pointer to be
      // captured, even though the loaded value might be the pointer itself
      // (think of self-referential objects).
      CallSite::arg_iterator B = CS.arg_begin(), E = CS.arg_end();
      for (CallSite::arg_iterator A = B; A != E; ++A)
        if (A->get() == V && !CS.doesNotCapture(A - B))
          // The parameter is not marked 'nocapture' - captured.
          if (Tracker->captured(U))
            return;
      break;
    }
    case Instruction::Load:
      // Loading from a pointer does not cause it to be captured.
      break;
    case Instruction::VAArg:
      // "va-arg" from a pointer does not cause it to be captured.
      break;
    case Instruction::Store:
      if (V == I->getOperand(0))
        // Stored the pointer - conservatively assume it may be captured.
        if (Tracker->captured(U))
          return;
      // Storing to the pointee does not cause the pointer to be captured.
      break;
    case Instruction::BitCast:
    case Instruction::GetElementPtr:
    case Instruction::PHI:
    case Instruction::Select:
      // The original value is not captured via this if the new value isn't.
      for (Instruction::use_iterator UI = I->use_begin(), UE = I->use_end();
           UI != UE; ++UI) {
        Use *U = &UI.getUse();
        if (Visited.insert(U))
          if (Tracker->shouldExplore(U))
            Worklist.push_back(U);
      }
      break;
    case Instruction::ICmp:
      // Don't count comparisons of a no-alias return value against null as
      // captures. This allows us to ignore comparisons of malloc results
      // with null, for example.
      if (ConstantPointerNull *CPN =
          dyn_cast<ConstantPointerNull>(I->getOperand(1)))
        if (CPN->getType()->getAddressSpace() == 0)
          if (isNoAliasCall(V->stripPointerCastsSafe()))
            break;
      // Otherwise, be conservative. There are crazy ways to capture pointers
      // using comparisons.
      if (Tracker->captured(U))
        return;
      break;
    default:
      // Something else - be conservative and say it is captured.
      if (Tracker->captured(U))
        return;
      break;
    }
  }

  // All uses examined.
}
示例#2
0
bool ObjCARCContract::runOnFunction(Function &F) {
  if (!EnableARCOpts)
    return false;

  // If nothing in the Module uses ARC, don't do anything.
  if (!Run)
    return false;

  Changed = false;
  AA = &getAnalysis<AliasAnalysis>();
  DT = &getAnalysis<DominatorTree>();

  PA.setAA(&getAnalysis<AliasAnalysis>());

  // Track whether it's ok to mark objc_storeStrong calls with the "tail"
  // keyword. Be conservative if the function has variadic arguments.
  // It seems that functions which "return twice" are also unsafe for the
  // "tail" argument, because they are setjmp, which could need to
  // return to an earlier stack state.
  bool TailOkForStoreStrongs = !F.isVarArg() &&
                               !F.callsFunctionThatReturnsTwice();

  // For ObjC library calls which return their argument, replace uses of the
  // argument with uses of the call return value, if it dominates the use. This
  // reduces register pressure.
  SmallPtrSet<Instruction *, 4> DependingInstructions;
  SmallPtrSet<const BasicBlock *, 4> Visited;
  for (inst_iterator I = inst_begin(&F), E = inst_end(&F); I != E; ) {
    Instruction *Inst = &*I++;

    DEBUG(dbgs() << "ObjCARCContract: Visiting: " << *Inst << "\n");

    // Only these library routines return their argument. In particular,
    // objc_retainBlock does not necessarily return its argument.
    InstructionClass Class = GetBasicInstructionClass(Inst);
    switch (Class) {
    case IC_Retain:
    case IC_FusedRetainAutorelease:
    case IC_FusedRetainAutoreleaseRV:
      break;
    case IC_Autorelease:
    case IC_AutoreleaseRV:
      if (ContractAutorelease(F, Inst, Class, DependingInstructions, Visited))
        continue;
      break;
    case IC_RetainRV: {
      // If we're compiling for a target which needs a special inline-asm
      // marker to do the retainAutoreleasedReturnValue optimization,
      // insert it now.
      if (!RetainRVMarker)
        break;
      BasicBlock::iterator BBI = Inst;
      BasicBlock *InstParent = Inst->getParent();

      // Step up to see if the call immediately precedes the RetainRV call.
      // If it's an invoke, we have to cross a block boundary. And we have
      // to carefully dodge no-op instructions.
      do {
        if (&*BBI == InstParent->begin()) {
          BasicBlock *Pred = InstParent->getSinglePredecessor();
          if (!Pred)
            goto decline_rv_optimization;
          BBI = Pred->getTerminator();
          break;
        }
        --BBI;
      } while (IsNoopInstruction(BBI));

      if (&*BBI == GetObjCArg(Inst)) {
        DEBUG(dbgs() << "ObjCARCContract: Adding inline asm marker for "
                        "retainAutoreleasedReturnValue optimization.\n");
        Changed = true;
        InlineAsm *IA =
          InlineAsm::get(FunctionType::get(Type::getVoidTy(Inst->getContext()),
                                           /*isVarArg=*/false),
                         RetainRVMarker->getString(),
                         /*Constraints=*/"", /*hasSideEffects=*/true);
        CallInst::Create(IA, "", Inst);
      }
    decline_rv_optimization:
      break;
    }
    case IC_InitWeak: {
      // objc_initWeak(p, null) => *p = null
      CallInst *CI = cast<CallInst>(Inst);
      if (IsNullOrUndef(CI->getArgOperand(1))) {
        Value *Null =
          ConstantPointerNull::get(cast<PointerType>(CI->getType()));
        Changed = true;
        new StoreInst(Null, CI->getArgOperand(0), CI);

        DEBUG(dbgs() << "OBJCARCContract: Old = " << *CI << "\n"
                     << "                 New = " << *Null << "\n");

        CI->replaceAllUsesWith(Null);
        CI->eraseFromParent();
      }
      continue;
    }
    case IC_Release:
      ContractRelease(Inst, I);
      continue;
    case IC_User:
      // Be conservative if the function has any alloca instructions.
      // Technically we only care about escaping alloca instructions,
      // but this is sufficient to handle some interesting cases.
      if (isa<AllocaInst>(Inst))
        TailOkForStoreStrongs = false;
      continue;
    case IC_IntrinsicUser:
      // Remove calls to @clang.arc.use(...).
      Inst->eraseFromParent();
      continue;
    default:
      continue;
    }

    DEBUG(dbgs() << "ObjCARCContract: Finished List.\n\n");

    // Don't use GetObjCArg because we don't want to look through bitcasts
    // and such; to do the replacement, the argument must have type i8*.
    const Value *Arg = cast<CallInst>(Inst)->getArgOperand(0);
    for (;;) {
      // If we're compiling bugpointed code, don't get in trouble.
      if (!isa<Instruction>(Arg) && !isa<Argument>(Arg))
        break;
      // Look through the uses of the pointer.
      for (Value::const_use_iterator UI = Arg->use_begin(), UE = Arg->use_end();
           UI != UE; ) {
        Use &U = UI.getUse();
        unsigned OperandNo = UI.getOperandNo();
        ++UI; // Increment UI now, because we may unlink its element.

        // If the call's return value dominates a use of the call's argument
        // value, rewrite the use to use the return value. We check for
        // reachability here because an unreachable call is considered to
        // trivially dominate itself, which would lead us to rewriting its
        // argument in terms of its return value, which would lead to
        // infinite loops in GetObjCArg.
        if (DT->isReachableFromEntry(U) && DT->dominates(Inst, U)) {
          Changed = true;
          Instruction *Replacement = Inst;
          Type *UseTy = U.get()->getType();
          if (PHINode *PHI = dyn_cast<PHINode>(U.getUser())) {
            // For PHI nodes, insert the bitcast in the predecessor block.
            unsigned ValNo = PHINode::getIncomingValueNumForOperand(OperandNo);
            BasicBlock *BB = PHI->getIncomingBlock(ValNo);
            if (Replacement->getType() != UseTy)
              Replacement = new BitCastInst(Replacement, UseTy, "",
                                            &BB->back());
            // While we're here, rewrite all edges for this PHI, rather
            // than just one use at a time, to minimize the number of
            // bitcasts we emit.
            for (unsigned i = 0, e = PHI->getNumIncomingValues(); i != e; ++i)
              if (PHI->getIncomingBlock(i) == BB) {
                // Keep the UI iterator valid.
                if (&PHI->getOperandUse(
                      PHINode::getOperandNumForIncomingValue(i)) ==
                    &UI.getUse())
                  ++UI;
                PHI->setIncomingValue(i, Replacement);
              }
          } else {
            if (Replacement->getType() != UseTy)
              Replacement = new BitCastInst(Replacement, UseTy, "",
                                            cast<Instruction>(U.getUser()));
            U.set(Replacement);
          }
        }
      }

      // If Arg is a no-op casted pointer, strip one level of casts and iterate.
      if (const BitCastInst *BI = dyn_cast<BitCastInst>(Arg))
        Arg = BI->getOperand(0);
      else if (isa<GEPOperator>(Arg) &&
               cast<GEPOperator>(Arg)->hasAllZeroIndices())
        Arg = cast<GEPOperator>(Arg)->getPointerOperand();
      else if (isa<GlobalAlias>(Arg) &&
               !cast<GlobalAlias>(Arg)->mayBeOverridden())
        Arg = cast<GlobalAlias>(Arg)->getAliasee();
      else
        break;
    }
  }

  // If this function has no escaping allocas or suspicious vararg usage,
  // objc_storeStrong calls can be marked with the "tail" keyword.
  if (TailOkForStoreStrongs)
    for (SmallPtrSet<CallInst *, 8>::iterator I = StoreStrongCalls.begin(),
         E = StoreStrongCalls.end(); I != E; ++I)
      (*I)->setTailCall();
  StoreStrongCalls.clear();

  return Changed;
}