//-----------------------------------------------------------------------------
// Purpose:
// Input : pMaterial -
// source -
// color -
//-----------------------------------------------------------------------------
void DrawHaloOriented( const Vector& source, float scale, float const *color, float roll )
{
Vector point, screen;
CMatRenderContextPtr pRenderContext( materials );
IMesh* pMesh = pRenderContext->GetDynamicMesh();
CMeshBuilder meshBuilder;
meshBuilder.Begin( pMesh, MATERIAL_QUADS, 1 );
// Transform source into screen space
ScreenTransform( source, screen );
Vector right, up;
float sr, cr;
SinCos( roll, &sr, &cr );
for ( int i = 0; i < 3; i++ )
{
right[i] = CurrentViewRight()[i] * cr + CurrentViewUp()[i] * sr;
up[i] = CurrentViewRight()[i] * -sr + CurrentViewUp()[i] * cr;
}
meshBuilder.Color3fv (color);
meshBuilder.TexCoord2f (0, 0, 1);
VectorMA (source, -scale, up, point);
VectorMA (point, -scale, right, point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.Color3fv (color);
meshBuilder.TexCoord2f (0, 0, 0);
VectorMA (source, scale, up, point);
VectorMA (point, -scale, right, point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.Color3fv (color);
meshBuilder.TexCoord2f (0, 1, 0);
VectorMA (source, scale, up, point);
VectorMA (point, scale, right, point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.Color3fv (color);
meshBuilder.TexCoord2f (0, 1, 1);
VectorMA (source, -scale, up, point);
VectorMA (point, scale, right, point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.End();
pMesh->Draw();
}
//-----------------------------------------------------------------------------
// Purpose:
// Input : pMaterial -
// source -
// color -
//-----------------------------------------------------------------------------
void DrawHalo(IMaterial* pMaterial, const Vector& source, float scale, float const* color, float flHDRColorScale )
{
static unsigned int nHDRColorScaleCache = 0;
Vector point, screen;
if( pMaterial )
{
IMaterialVar *pHDRColorScaleVar = pMaterial->FindVarFast( "$hdrcolorscale", &nHDRColorScaleCache );
if( pHDRColorScaleVar )
{
pHDRColorScaleVar->SetFloatValue( flHDRColorScale );
}
}
CMatRenderContextPtr pRenderContext( materials );
IMesh* pMesh = pRenderContext->GetDynamicMesh( );
CMeshBuilder meshBuilder;
meshBuilder.Begin( pMesh, MATERIAL_QUADS, 1 );
// Transform source into screen space
ScreenTransform( source, screen );
meshBuilder.Color3fv (color);
meshBuilder.TexCoord2f (0, 0, 1);
VectorMA (source, -scale, CurrentViewUp(), point);
VectorMA (point, -scale, CurrentViewRight(), point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.Color3fv (color);
meshBuilder.TexCoord2f (0, 0, 0);
VectorMA (source, scale, CurrentViewUp(), point);
VectorMA (point, -scale, CurrentViewRight(), point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.Color3fv (color);
meshBuilder.TexCoord2f (0, 1, 0);
VectorMA (source, scale, CurrentViewUp(), point);
VectorMA (point, scale, CurrentViewRight(), point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.Color3fv (color);
meshBuilder.TexCoord2f (0, 1, 1);
VectorMA (source, -scale, CurrentViewUp(), point);
VectorMA (point, scale, CurrentViewRight(), point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.End();
pMesh->Draw();
}
float PixelVisibility_DrawProxy( IMatRenderContext *pRenderContext, OcclusionQueryObjectHandle_t queryHandle, Vector origin, float scale, float proxyAspect, IMaterial *pMaterial, bool screenspace )
{
Vector point;
// don't expand this with distance to fit pixels or the sprite will poke through
// only expand the parts perpendicular to the view
float forwardScale = scale;
// draw a pyramid of points touching a sphere of radius "scale" at origin
float pixelsPerUnit = pRenderContext->ComputePixelDiameterOfSphere( origin, 1.0f );
pixelsPerUnit = MAX( pixelsPerUnit, 1e-4f );
if ( screenspace )
{
// Force this to be the size of a sphere of diameter "scale" at some reference distance (1.0 unit)
float pixelsPerUnit2 = pRenderContext->ComputePixelDiameterOfSphere( CurrentViewOrigin() + CurrentViewForward()*1.0f, scale*0.5f );
// force drawing of "scale" pixels
scale = pixelsPerUnit2 / pixelsPerUnit;
}
else
{
float pixels = scale * pixelsPerUnit;
// make the radius larger to ensure a minimum screen space size of the proxy geometry
if ( pixels < MIN_PROXY_PIXELS )
{
scale = MIN_PROXY_PIXELS / pixelsPerUnit;
}
}
// collapses the pyramid to a plane - so this could be a quad instead
Vector dir = origin - CurrentViewOrigin();
VectorNormalize(dir);
origin -= dir * forwardScale;
forwardScale = 0.0f;
//
Vector verts[5];
const float sqrt2 = 0.707106781f; // sqrt(2) - keeps all vectors the same length from origin
scale *= sqrt2;
float scale45x = scale;
float scale45y = scale / proxyAspect;
verts[0] = origin - CurrentViewForward() * forwardScale; // the apex of the pyramid
verts[1] = origin + CurrentViewUp() * scale45y - CurrentViewRight() * scale45x; // these four form the base
verts[2] = origin + CurrentViewUp() * scale45y + CurrentViewRight() * scale45x; // the pyramid is a sprite with a point that
verts[3] = origin - CurrentViewUp() * scale45y + CurrentViewRight() * scale45x; // pokes back toward the camera through any nearby
verts[4] = origin - CurrentViewUp() * scale45y - CurrentViewRight() * scale45x; // geometry
// get screen coords of edges
Vector screen[4];
for ( int i = 0; i < 4; i++ )
{
extern int ScreenTransform( const Vector& point, Vector& screen );
if ( ScreenTransform( verts[i+1], screen[i] ) )
return -1;
}
// compute area and screen-clipped area
float w = screen[1].x - screen[0].x;
float h = screen[0].y - screen[3].y;
float ws = MIN(1.0f, screen[1].x) - MAX(-1.0f, screen[0].x);
float hs = MIN(1.0f, screen[0].y) - MAX(-1.0f, screen[3].y);
float area = w*h; // area can be zero when we ALT-TAB
float areaClipped = ws*hs;
float ratio = 0.0f;
if ( area != 0 )
{
// compute the ratio of the area not clipped by the frustum to total area
ratio = areaClipped / area;
ratio = clamp(ratio, 0.0f, 1.0f);
}
pRenderContext->BeginOcclusionQueryDrawing( queryHandle );
CMeshBuilder meshBuilder;
IMesh* pMesh = pRenderContext->GetDynamicMesh( false, NULL, NULL, pMaterial );
meshBuilder.Begin( pMesh, MATERIAL_TRIANGLES, 4 );
// draw a pyramid
for ( int i = 0; i < 4; i++ )
{
int a = i+1;
int b = (a%4)+1;
meshBuilder.Position3fv( verts[0].Base() );
meshBuilder.AdvanceVertex();
meshBuilder.Position3fv( verts[a].Base() );
meshBuilder.AdvanceVertex();
meshBuilder.Position3fv( verts[b].Base() );
meshBuilder.AdvanceVertex();
}
meshBuilder.End();
pMesh->Draw();
// sprite/quad proxy
#if 0
meshBuilder.Begin( pMesh, MATERIAL_QUADS, 1 );
VectorMA (origin, -scale, CurrentViewUp(), point);
VectorMA (point, -scale, CurrentViewRight(), point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
VectorMA (origin, scale, CurrentViewUp(), point);
VectorMA (point, -scale, CurrentViewRight(), point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
VectorMA (origin, scale, CurrentViewUp(), point);
VectorMA (point, scale, CurrentViewRight(), point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
VectorMA (origin, -scale, CurrentViewUp(), point);
VectorMA (point, scale, CurrentViewRight(), point);
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.End();
pMesh->Draw();
#endif
pRenderContext->EndOcclusionQueryDrawing( queryHandle );
// fraction clipped by frustum
return ratio;
}
//-----------------------------------------------------------------------------
// Purpose: Determine sprite orientation axes
// Input : type -
// forward -
// right -
// up -
//-----------------------------------------------------------------------------
void C_SpriteRenderer::GetSpriteAxes( SPRITETYPE type,
const Vector& origin,
const QAngle& angles,
Vector& forward,
Vector& right,
Vector& up )
{
int i;
float dot, angle, sr, cr;
Vector tvec;
// Automatically roll parallel sprites if requested
if ( angles[2] != 0 && type == SPR_VP_PARALLEL )
{
type = SPR_VP_PARALLEL_ORIENTED;
}
switch( type )
{
case SPR_FACING_UPRIGHT:
{
// generate the sprite's axes, with vup straight up in worldspace, and
// r_spritedesc.vright perpendicular to modelorg.
// This will not work if the view direction is very close to straight up or
// down, because the cross product will be between two nearly parallel
// vectors and starts to approach an undefined state, so we don't draw if
// the two vectors are less than 1 degree apart
tvec[0] = -origin[0];
tvec[1] = -origin[1];
tvec[2] = -origin[2];
VectorNormalize (tvec);
dot = tvec[2]; // same as DotProduct (tvec, r_spritedesc.vup) because
// r_spritedesc.vup is 0, 0, 1
if ((dot > 0.999848f) || (dot < -0.999848f)) // cos(1 degree) = 0.999848
return;
up[0] = 0;
up[1] = 0;
up[2] = 1;
right[0] = tvec[1];
// CrossProduct(r_spritedesc.vup, -modelorg,
right[1] = -tvec[0];
// r_spritedesc.vright)
right[2] = 0;
VectorNormalize (right);
forward[0] = -right[1];
forward[1] = right[0];
forward[2] = 0;
// CrossProduct (r_spritedesc.vright, r_spritedesc.vup,
// r_spritedesc.vpn)
}
break;
case SPR_VP_PARALLEL:
{
// generate the sprite's axes, completely parallel to the viewplane. There
// are no problem situations, because the sprite is always in the same
// position relative to the viewer
for (i=0 ; i<3 ; i++)
{
up[i] = CurrentViewUp()[i];
right[i] = CurrentViewRight()[i];
forward[i] = CurrentViewForward()[i];
}
}
break;
case SPR_VP_PARALLEL_UPRIGHT:
{
// generate the sprite's axes, with g_vecVUp straight up in worldspace, and
// r_spritedesc.vright parallel to the viewplane.
// This will not work if the view direction is very close to straight up or
// down, because the cross product will be between two nearly parallel
// vectors and starts to approach an undefined state, so we don't draw if
// the two vectors are less than 1 degree apart
dot = CurrentViewForward()[2]; // same as DotProduct (vpn, r_spritedesc.g_vecVUp) because
// r_spritedesc.vup is 0, 0, 1
if ((dot > 0.999848f) || (dot < -0.999848f)) // cos(1 degree) = 0.999848
return;
up[0] = 0;
up[1] = 0;
up[2] = 1;
right[0] = CurrentViewForward()[1];
// CrossProduct (r_spritedesc.vup, vpn,
right[1] = -CurrentViewForward()[0]; // r_spritedesc.vright)
right[2] = 0;
VectorNormalize (right);
forward[0] = -right[1];
forward[1] = right[0];
forward[2] = 0;
// CrossProduct (r_spritedesc.vright, r_spritedesc.vup,
// r_spritedesc.vpn)
}
break;
case SPR_ORIENTED:
{
// generate the sprite's axes, according to the sprite's world orientation
AngleVectors( angles, &forward, &right, &up );
}
break;
case SPR_VP_PARALLEL_ORIENTED:
{
// generate the sprite's axes, parallel to the viewplane, but rotated in
// that plane around the center according to the sprite entity's roll
// angle. So vpn stays the same, but vright and vup rotate
angle = angles[ROLL] * (M_PI*2.0f/360.0f);
SinCos( angle, &sr, &cr );
for (i=0 ; i<3 ; i++)
{
forward[i] = CurrentViewForward()[i];
right[i] = CurrentViewRight()[i] * cr + CurrentViewUp()[i] * sr;
up[i] = CurrentViewRight()[i] * -sr + CurrentViewUp()[i] * cr;
}
}
break;
default:
Warning( "GetSpriteAxes: Bad sprite type %d\n", type );
break;
}
}
static void DrawSpriteTangentSpace( const Vector &vecOrigin, float flWidth, float flHeight, color32 color )
{
unsigned char pColor[4] = { color.r, color.g, color.b, color.a };
// Generate half-widths
flWidth *= 0.5f;
flHeight *= 0.5f;
// Compute direction vectors for the sprite
Vector fwd, right( 1, 0, 0 ), up( 0, 1, 0 );
VectorSubtract( CurrentViewOrigin(), vecOrigin, fwd );
float flDist = VectorNormalize( fwd );
if (flDist >= 1e-3)
{
CrossProduct( CurrentViewUp(), fwd, right );
flDist = VectorNormalize( right );
if (flDist >= 1e-3)
{
CrossProduct( fwd, right, up );
}
else
{
// In this case, fwd == g_vecVUp, it's right above or
// below us in screen space
CrossProduct( fwd, CurrentViewRight(), up );
VectorNormalize( up );
CrossProduct( up, fwd, right );
}
}
Vector left = -right;
Vector down = -up;
Vector back = -fwd;
CMeshBuilder meshBuilder;
Vector point;
IMesh* pMesh = materials->GetDynamicMesh( );
meshBuilder.Begin( pMesh, MATERIAL_QUADS, 1 );
meshBuilder.Color4ubv (pColor);
meshBuilder.TexCoord2f (0, 0, 1);
VectorMA (vecOrigin, -flHeight, up, point);
VectorMA (point, -flWidth, right, point);
meshBuilder.TangentS3fv( left.Base() );
meshBuilder.TangentT3fv( down.Base() );
meshBuilder.Normal3fv( back.Base() );
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.Color4ubv (pColor);
meshBuilder.TexCoord2f (0, 0, 0);
VectorMA (vecOrigin, flHeight, up, point);
VectorMA (point, -flWidth, right, point);
meshBuilder.TangentS3fv( left.Base() );
meshBuilder.TangentT3fv( down.Base() );
meshBuilder.Normal3fv( back.Base() );
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.Color4ubv (pColor);
meshBuilder.TexCoord2f (0, 1, 0);
VectorMA (vecOrigin, flHeight, up, point);
VectorMA (point, flWidth, right, point);
meshBuilder.TangentS3fv( left.Base() );
meshBuilder.TangentT3fv( down.Base() );
meshBuilder.Normal3fv( back.Base() );
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.Color4ubv (pColor);
meshBuilder.TexCoord2f (0, 1, 1);
VectorMA (vecOrigin, -flHeight, up, point);
VectorMA (point, flWidth, right, point);
meshBuilder.TangentS3fv( left.Base() );
meshBuilder.TangentT3fv( down.Base() );
meshBuilder.Normal3fv( back.Base() );
meshBuilder.Position3fv (point.Base());
meshBuilder.AdvanceVertex();
meshBuilder.End();
pMesh->Draw();
}
//-----------------------------------------------------------------------------
// Purpose:
// Input : noise_divisions -
// *prgNoise -
// *spritemodel -
// frame -
// rendermode -
// source -
// delta -
// flags -
// *color -
// fadescale -
//-----------------------------------------------------------------------------
void DrawSegs( int noise_divisions, float *prgNoise, const model_t* spritemodel,
float frame, int rendermode, const Vector& source, const Vector& delta,
float startWidth, float endWidth, float scale, float freq, float speed, int segments,
int flags, float* color, float fadeLength, float flHDRColorScale )
{
int i, noiseIndex, noiseStep;
float div, length, fraction, factor, vLast, vStep, brightness;
Assert( fadeLength >= 0.0f );
CEngineSprite *pSprite = Draw_SetSpriteTexture( spritemodel, frame, rendermode );
if ( !pSprite )
return;
if ( segments < 2 )
return;
IMaterial *pMaterial = pSprite->GetMaterial( (RenderMode_t)rendermode );
if( pMaterial )
{
static unsigned int nHDRColorScaleCache = 0;
IMaterialVar *pHDRColorScaleVar = pMaterial->FindVarFast( "$hdrcolorscale", &nHDRColorScaleCache );
if( pHDRColorScaleVar )
{
pHDRColorScaleVar->SetFloatValue( flHDRColorScale );
}
}
length = VectorLength( delta );
float flMaxWidth = MAX(startWidth, endWidth) * 0.5f;
div = 1.0 / (segments-1);
if ( length*div < flMaxWidth * 1.414 )
{
// Here, we have too many segments; we could get overlap... so lets have less segments
segments = (int)(length / (flMaxWidth * 1.414)) + 1;
if ( segments < 2 )
{
segments = 2;
}
}
if ( segments > noise_divisions ) // UNDONE: Allow more segments?
{
segments = noise_divisions;
}
div = 1.0 / (segments-1);
length *= 0.01;
// UNDONE: Expose texture length scale factor to control "fuzziness"
if ( flags & FBEAM_NOTILE )
{
// Don't tile
vStep = div;
}
else
{
// Texture length texels per space pixel
vStep = length*div;
}
// UNDONE: Expose this paramter as well(3.5)? Texture scroll rate along beam
vLast = fmod(freq*speed,1); // Scroll speed 3.5 -- initial texture position, scrolls 3.5/sec (1.0 is entire texture)
if ( flags & FBEAM_SINENOISE )
{
if ( segments < 16 )
{
segments = 16;
div = 1.0 / (segments-1);
}
scale *= 100;
length = segments * (1.0/10);
}
else
{
scale *= length;
}
// Iterator to resample noise waveform (it needs to be generated in powers of 2)
noiseStep = (int)((float)(noise_divisions-1) * div * 65536.0f);
noiseIndex = 0;
if ( flags & FBEAM_SINENOISE )
{
noiseIndex = 0;
}
brightness = 1.0;
if ( flags & FBEAM_SHADEIN )
{
brightness = 0;
}
// What fraction of beam should be faded
Assert( fadeLength >= 0.0f );
float fadeFraction = fadeLength/ delta.Length();
// BUGBUG: This code generates NANs when fadeFraction is zero! REVIST!
fadeFraction = clamp(fadeFraction,1.e-6f,1.f);
// Choose two vectors that are perpendicular to the beam
Vector perp1;
ComputeBeamPerpendicular( delta, &perp1 );
// Specify all the segments.
CMatRenderContextPtr pRenderContext( g_pMaterialSystem );
CBeamSegDraw segDraw;
segDraw.Start( pRenderContext, segments, NULL );
for ( i = 0; i < segments; i++ )
{
Assert( noiseIndex < (noise_divisions<<16) );
BeamSeg_t curSeg;
curSeg.m_flAlpha = 1;
fraction = i * div;
// Fade in our out beam to fadeLength
if ( (flags & FBEAM_SHADEIN) && (flags & FBEAM_SHADEOUT) )
{
if (fraction < 0.5)
{
brightness = 2*(fraction/fadeFraction);
}
else
{
brightness = 2*(1.0 - (fraction/fadeFraction));
}
}
else if ( flags & FBEAM_SHADEIN )
{
brightness = fraction/fadeFraction;
}
else if ( flags & FBEAM_SHADEOUT )
{
brightness = 1.0 - (fraction/fadeFraction);
}
// clamps
if (brightness < 0 )
{
brightness = 0;
}
else if (brightness > 1)
{
brightness = 1;
}
VectorScale( *((Vector*)color), brightness, curSeg.m_vColor );
// UNDONE: Make this a spline instead of just a line?
VectorMA( source, fraction, delta, curSeg.m_vPos );
// Distort using noise
if ( scale != 0 )
{
factor = prgNoise[noiseIndex>>16] * scale;
if ( flags & FBEAM_SINENOISE )
{
float s, c;
SinCos( fraction*M_PI*length + freq, &s, &c );
VectorMA( curSeg.m_vPos, factor * s, CurrentViewUp(), curSeg.m_vPos );
// Rotate the noise along the perpendicluar axis a bit to keep the bolt from looking diagonal
VectorMA( curSeg.m_vPos, factor * c, CurrentViewRight(), curSeg.m_vPos );
}
else
{
VectorMA( curSeg.m_vPos, factor, perp1, curSeg.m_vPos );
}
}
// Specify the next segment.
if( endWidth == startWidth )
{
curSeg.m_flWidth = startWidth * 2;
}
else
{
curSeg.m_flWidth = ((fraction*(endWidth-startWidth))+startWidth) * 2;
}
curSeg.m_flTexCoord = vLast;
segDraw.NextSeg( &curSeg );
vLast += vStep; // Advance texture scroll (v axis only)
noiseIndex += noiseStep;
}