/*********************************************************************
* @fn OADManager_Init
*
* @brief Initialization function for the OAD Manager App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notification).
*
* @param task_id - the ID assigned by OSAL. This ID should be
* used to send messages and set timers.
*
* @return none
*/
void OADManager_Init( uint8 task_id )
{
oadManagerTaskId = task_id;
// Setup Central Profile
{
uint8 scanRes = DEFAULT_MAX_SCAN_RES;
GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes );
}
// Setup GAP
GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION );
GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION );
GAP_SetParamValue( TGAP_REJECT_CONN_PARAMS, DEFAULT_OAD_REJECT_CONN_PARAMS );
GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, (uint8 *) oadManagerDeviceName );
// Initialize GATT Client
VOID GATT_InitClient();
// Register to receive incoming ATT Indications/Notifications
GATT_RegisterForInd( task_id );
#if (defined HAL_KEY) && (HAL_KEY == TRUE)
// Register for all key events - This app will handle all key events
RegisterForKeys( task_id );
#endif
#if (defined HAL_LED) && (HAL_LED == TRUE)
HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF );
#endif
// Setup a delayed profile startup
osal_set_event( task_id, START_DEVICE_EVT );
}
/*********************************************************************
* @fn SimpleBLECentral_Init
*
* @brief Initialization function for the Simple BLE Central App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notification).
*
* @param task_id - the ID assigned by OSAL. This ID should be
* used to send messages and set timers.
*
* @return none
*/
void SimpleBLECentral_Init( uint8 task_id )
{
simpleBLETaskId = task_id;
// 串口初始化
NPI_InitTransport(uart_NpiSerialCallback);
//NPI_WriteTransport("SimpleBLECentral_Init\r\n", 23);
Get_IMEI();
//halSleep(100);
//Get_Test();
// Setup Central Profile
{
uint8 scanRes = DEFAULT_MAX_SCAN_RES;
GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes );
}
// Setup GAP
GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION );
GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION );
GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, (uint8 *) simpleBLEDeviceName );
// Setup the GAP Bond Manager
{
uint32 passkey = DEFAULT_PASSCODE;
uint8 pairMode = DEFAULT_PAIRING_MODE;
uint8 mitm = DEFAULT_MITM_MODE;
uint8 ioCap = DEFAULT_IO_CAPABILITIES;
uint8 bonding = DEFAULT_BONDING_MODE;
GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof( uint32 ), &passkey );
GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof( uint8 ), &pairMode );
GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof( uint8 ), &mitm );
GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof( uint8 ), &ioCap );
GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof( uint8 ), &bonding );
}
// Initialize GATT Client
VOID GATT_InitClient();
// Register to receive incoming ATT Indications/Notifications
GATT_RegisterForInd( simpleBLETaskId );
// Initialize GATT attributes
GGS_AddService( GATT_ALL_SERVICES ); // GAP
GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes
// Register for all key events - This app will handle all key events
RegisterForKeys( simpleBLETaskId );
// makes sure LEDs are off
HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF );
// Setup a delayed profile startup
osal_set_event( simpleBLETaskId, START_DEVICE_EVT );
}
void SwitchCentral_Init( void ){
uint8 scanRes = MAX_SCAN_RES;
GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes );
GAP_SetParamValue( TGAP_GEN_DISC_SCAN, SCAN_DURATION );
GAP_SetParamValue( TGAP_LIM_DISC_SCAN, SCAN_DURATION );
//static varibles initiation
send_record=0;
HandleRangeStart = 0;
HandleRangeEnd = 0;
simpleBLEScanRes=0;
// for(uint8 i=0; i<MAX_SCAN_RES; ++i)
// osal_memcpy( simpleBLEDevList[i].addr, 0, B_ADDR_LEN );
}
/*********************************************************************
* @fn SimpleBLECentral_Init
*
* @brief Initialization function for the Simple BLE Central App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notification).
*
* @param task_id - the ID assigned by OSAL. This ID should be
* used to send messages and set timers.
*
* @return none
*/
void SimpleBLECentral_Init( uint8 task_id )
{
simpleBLETaskId = task_id;
// Setup Central Profile
{
uint8 scanRes = DEFAULT_MAX_SCAN_RES;
GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes );
}
// Setup GAP
GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION );
GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION );
GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, (uint8 *) simpleBLEDeviceName );
// Setup the GAP Bond Manager
{
uint32 passkey = DEFAULT_PASSCODE;
uint8 pairMode = DEFAULT_PAIRING_MODE;
uint8 mitm = DEFAULT_MITM_MODE;
uint8 ioCap = DEFAULT_IO_CAPABILITIES;
uint8 bonding = DEFAULT_BONDING_MODE;
GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof( uint32 ), &passkey );
GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof( uint8 ), &pairMode );
GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof( uint8 ), &mitm );
GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof( uint8 ), &ioCap );
GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof( uint8 ), &bonding );
}
// Initialize GATT Client
VOID GATT_InitClient();
// Register to receive incoming ATT Indications/Notifications
GATT_RegisterForInd( simpleBLETaskId );
// Initialize GATT attributes
GGS_AddService( GATT_ALL_SERVICES ); // GAP
GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes
// Register for all key events - This app will handle all key events
RegisterForKeys( simpleBLETaskId );
// makes sure LEDs are off
HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF );
// Setup a delayed profile startup
osal_set_event( simpleBLETaskId, START_DEVICE_EVT );
/*
{
//w5500_read_server_mac();
w5500_read_server_ip();
uint32 nest=0;
if(w5500_check_link())
{
w5500_socket_send_cmd(SOCKET_IDEX_0,SOCKET_CMD_OPEN);
do
{
if(nest>20000)
{
w5500_socket_handle_status(w5500_socket_read_status(SOCKET_IDEX_0));
nest=0;
}
nest++;
}
while(w5500_socket_state!= SOCKET_INIT);
w5500_socket_send_cmd(SOCKET_IDEX_0,SOCKET_CMD_CONNECT);
do
{
if(nest>20000)
{
w5500_socket_handle_status(w5500_socket_read_status(SOCKET_IDEX_0));
nest=0;
}
nest++;
}
while(w5500_socket_state!=SOCK_ESTABLISHED);
do
{
if(nest>20000)
{
w5500_socket_send(SOCKET_IDEX_0,"hello wkxboot!!",15);
w5500_read_server_mac();
w5500_read_server_ip();
w5500_socket_handle_int(SOCKET_IDEX_0);
nest=0;
}
nest++;
}
while(1);
}
}
*/
}
/*******************************************************************************
*
* @fn hidappInit
*
* @brief This is the Sample Application task initialization called by OSAL.
*
* @param taskId - task ID assigned after it was added in the OSAL task queue
*
* @return none
*/
void Hidapp_Init( uint8 taskId )
{
// save task ID assigned by OSAL
hidappTaskId = taskId;
// Setup Central Profile
{
uint8 scanRes = DEFAULT_MAX_SCAN_RES;
VOID GAPCentralRole_SetParameter( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes );
}
// Setup GAP
{
VOID GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION );
VOID GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION );
// Set scanning interval, 48 = 30ms
VOID GAP_SetParamValue( TGAP_LIM_DISC_SCAN_INT, 48 );
// Set scannng window, 48 = 30ms
VOID GAP_SetParamValue( TGAP_LIM_DISC_SCAN_WIND, 48 );
}
// Setup the GAP Bond Manager
{
uint32 passkey = DEFAULT_PASSCODE;
uint8 pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ;
uint8 mitm = DEFAULT_MITM_MODE;
uint8 ioCap = DEFAULT_IO_CAPABILITIES;
uint8 bonding = DEFAULT_BONDING_MODE;
uint8 autoSync = TRUE;
uint8 bondFailAction = GAPBOND_FAIL_TERMINATE_ERASE_BONDS;
VOID GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof( uint32 ), &passkey );
VOID GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof( uint8 ), &pairMode );
VOID GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof( uint8 ), &mitm );
VOID GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof( uint8 ), &ioCap );
VOID GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof( uint8 ), &bonding );
VOID GAPBondMgr_SetParameter( GAPBOND_AUTO_SYNC_WL, sizeof( uint8 ), &autoSync );
VOID GAPBondMgr_SetParameter( GAPBOND_BOND_FAIL_ACTION, sizeof( uint8 ), &bondFailAction );
}
// USB suspend entry/exit hook function setup
pFnSuspendEnterHook = hidappSuspendEnter;
pFnSuspendExitHook = hidappSuspendExit;
// Initialize GATT Client
VOID GATT_InitClient();
// Register to receive notifications
GATT_RegisterForInd( hidappTaskId );
// Set connection parameters:
{
uint16 connectionInterval = APP_CONN_INTERVAL;
uint16 slaveLatency = APP_SLAVE_LATENCY;
uint16 timeout = APP_CONN_TIMEOUT;
VOID GAP_SetParamValue( TGAP_CONN_EST_INT_MIN, connectionInterval );
VOID GAP_SetParamValue( TGAP_CONN_EST_INT_MAX, connectionInterval );
VOID GAP_SetParamValue( TGAP_CONN_EST_LATENCY, slaveLatency );
VOID GAP_SetParamValue( TGAP_CONN_EST_SUPERV_TIMEOUT, timeout );
}
// Register callbacks with the GAP Bond Manager.
GAPBondMgr_Register( &gapBondCBs );
//HalKeyConfig(HAL_KEY_INTERRUPT_ENABLE, hidappHandleKeys);
RegisterForKeys( hidappTaskId );
// set up continued initialization from within OSAL task loop
VOID osal_start_timerEx( taskId, HIDAPP_EVT_START, 100 );
// Clear remote data
hidappEraseHandles();
VOID HCI_EXT_HaltDuringRfCmd( HCI_EXT_HALT_DURING_RF_DISABLE );
}
/*********************************************************************
* @fn glucCollCentral_Init
*
* @brief Initialization function for the Glucose Collector App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notification).
*
*
* @return none
*/
static void glucCollCentral_Init()
{
// ******************************************************************
// N0 STACK API CALLS CAN OCCUR BEFORE THIS CALL TO ICall_registerApp
// ******************************************************************
// Register the current thread as an ICall dispatcher application
// so that the application can send and receive messages.
ICall_registerApp(&selfEntity, &sem);
// Set device's Sleep Clock Accuracy
//HCI_EXT_SetSCACmd(40);
// Save the taskId
glucCollTaskId = selfEntity;
// Create an RTOS queue for message from profile to be sent to app.
appMsgQueue = Util_constructQueue(&appMsg);
Board_openLCD();
// Create clock objects for discovery and procedure timeout
Util_constructClock(&discoveryClock, glucCollCentral_clockHandler,
DEFAULT_SVC_DISCOVERY_DELAY, 0, false,
GLUCOLL_START_DISCOVERY_EVT);
Util_constructClock(&procTimeoutClock, glucCollCentral_clockHandler,
GLUCOSE_PROCEDURE_TIMEOUT, 0, false,
GLUCOLL_PROCEDURE_TIMEOUT_EVT);
// Setup Central Profile
{
uint8_t scanRes = DEFAULT_MAX_SCAN_RES;
GAPCentralRole_SetParameter (GAPCENTRALROLE_MAX_SCAN_RES, sizeof(uint8_t),
&scanRes);
}
// Setup GAP
GAP_SetParamValue(TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION);
GAP_SetParamValue(TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION);
GGS_SetParameter(GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN,
(uint8_t *)glucCollDeviceName);
// Setup the GAP Bond Manager
{
uint32_t passkey = DEFAULT_PASSCODE;
uint8_t pairMode = DEFAULT_PAIRING_MODE;
uint8_t mitm = DEFAULT_MITM_MODE;
uint8_t ioCap = DEFAULT_IO_CAPABILITIES;
uint8_t bonding = DEFAULT_BONDING_MODE;
GAPBondMgr_SetParameter(GAPBOND_DEFAULT_PASSCODE, sizeof(uint32_t), &passkey);
GAPBondMgr_SetParameter(GAPBOND_PAIRING_MODE, sizeof(uint8_t), &pairMode);
GAPBondMgr_SetParameter(GAPBOND_MITM_PROTECTION, sizeof(uint8_t), &mitm);
GAPBondMgr_SetParameter(GAPBOND_IO_CAPABILITIES, sizeof(uint8_t), &ioCap);
GAPBondMgr_SetParameter(GAPBOND_BONDING_ENABLED, sizeof(uint8_t), &bonding);
}
// Initialize GATT Client
VOID GATT_InitClient();
// Register to receive incoming ATT Indications/Notifications
GATT_RegisterForInd(glucCollTaskId);
// Initialize GATT attributes
GGS_AddService(GATT_ALL_SERVICES); // GAP
GATTServApp_AddService(GATT_ALL_SERVICES); // GATT attributes
// Register for all key events - This app will handle all key events
Board_initKeys(glucCollCentral_keyChangeHandler);
// Register with bond manager after starting device
GAPBondMgr_Register((gapBondCBs_t *)&glucCollBondCB);
// Start the Device
VOID GAPCentralRole_StartDevice((gapCentralRoleCB_t *)&glucCollRoleCB);
}
/*********************************************************************
* @fn SimpleBLECentral_Init
*
* @brief Initialization function for the Simple BLE Central App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notification).
*
* @param task_id - the ID assigned by OSAL. This ID should be
* used to send messages and set timers.
*
* @return none
*/
void SimpleBLECentral_Init( uint8 task_id )
{
simpleBLETaskId = task_id;
HalAdcInit();
LCD_WRITE_STRING( "CentralHop 1", HAL_LCD_LINE_1 );
//////////////////////////////////////////////////////////////////
// Broadcaster
// Setup the GAP Broadcaster Role Profile
{
#if defined( CC2540_MINIDK )
// For the CC2540DK-MINI keyfob, device doesn't start advertising until button is pressed
uint8 initial_advertising_enable = FALSE;
#else
// For other hardware platforms, device starts advertising upon initialization
uint8 initial_advertising_enable = TRUE;
#endif
// By setting this to zero, the device will go into the waiting state after
// being discoverable for 30.72 second, and will not being advertising again
// until the enabler is set back to TRUE
uint16 gapRole_AdvertOffTime = 0;
//uint8 advType = GAP_ADTYPE_ADV_NONCONN_IND; // use non-connectable advertisements
uint8 advType = GAP_ADTYPE_ADV_SCAN_IND; // use scannable unidirected advertisements
// Set the GAP Role Parameters
GAPRole_SetParameter( GAPROLE_ADVERT_ENABLED, sizeof( uint8 ), &initial_advertising_enable );
GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime );
GAPRole_SetParameter( GAPROLE_ADVERT_DATA, sizeof( advertData ), advertData );
GAPRole_SetParameter( GAPROLE_ADV_EVENT_TYPE, sizeof( uint8 ), &advType );
}
// Set advertising interval
{
uint16 advInt = DEFAULT_ADVERTISING_INTERVAL;
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MAX, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MAX, advInt );
}
//////////////////////////////////////////////////////////////
// Central
// Setup Central Profile
{
uint8 scanRes = DEFAULT_MAX_SCAN_RES;
GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes );
}
// Setup GAP
GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION );
GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION );
GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, (uint8 *) simpleBLEDeviceName );
// Setup the GAP Bond Manager
{
uint32 passkey = DEFAULT_PASSCODE;
uint8 pairMode = DEFAULT_PAIRING_MODE;
uint8 mitm = DEFAULT_MITM_MODE;
uint8 ioCap = DEFAULT_IO_CAPABILITIES;
uint8 bonding = DEFAULT_BONDING_MODE;
GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof( uint32 ), &passkey );
GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof( uint8 ), &pairMode );
GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof( uint8 ), &mitm );
GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof( uint8 ), &ioCap );
GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof( uint8 ), &bonding );
}
// Initialize GATT Client
VOID GATT_InitClient();
// Register to receive incoming ATT Indications/Notifications
GATT_RegisterForInd( simpleBLETaskId );
// Initialize GATT attributes
GGS_AddService( GATT_ALL_SERVICES ); // GAP
GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes
// Register for all key events - This app will handle all key events
RegisterForKeys( simpleBLETaskId );
// makes sure LEDs are off
HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF );
// Setup a delayed profile startup
osal_set_event( simpleBLETaskId, START_DEVICE_EVT );
}