/********************************************************************* * @fn OADManager_Init * * @brief Initialization function for the OAD Manager App Task. * This is called during initialization and should contain * any application specific initialization (ie. hardware * initialization/setup, table initialization, power up * notification). * * @param task_id - the ID assigned by OSAL. This ID should be * used to send messages and set timers. * * @return none */ void OADManager_Init( uint8 task_id ) { oadManagerTaskId = task_id; // Setup Central Profile { uint8 scanRes = DEFAULT_MAX_SCAN_RES; GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes ); } // Setup GAP GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION ); GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION ); GAP_SetParamValue( TGAP_REJECT_CONN_PARAMS, DEFAULT_OAD_REJECT_CONN_PARAMS ); GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, (uint8 *) oadManagerDeviceName ); // Initialize GATT Client VOID GATT_InitClient(); // Register to receive incoming ATT Indications/Notifications GATT_RegisterForInd( task_id ); #if (defined HAL_KEY) && (HAL_KEY == TRUE) // Register for all key events - This app will handle all key events RegisterForKeys( task_id ); #endif #if (defined HAL_LED) && (HAL_LED == TRUE) HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF ); #endif // Setup a delayed profile startup osal_set_event( task_id, START_DEVICE_EVT ); }
/********************************************************************* * @fn SimpleBLECentral_Init * * @brief Initialization function for the Simple BLE Central App Task. * This is called during initialization and should contain * any application specific initialization (ie. hardware * initialization/setup, table initialization, power up * notification). * * @param task_id - the ID assigned by OSAL. This ID should be * used to send messages and set timers. * * @return none */ void SimpleBLECentral_Init( uint8 task_id ) { simpleBLETaskId = task_id; // 串口初始化 NPI_InitTransport(uart_NpiSerialCallback); //NPI_WriteTransport("SimpleBLECentral_Init\r\n", 23); Get_IMEI(); //halSleep(100); //Get_Test(); // Setup Central Profile { uint8 scanRes = DEFAULT_MAX_SCAN_RES; GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes ); } // Setup GAP GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION ); GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION ); GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, (uint8 *) simpleBLEDeviceName ); // Setup the GAP Bond Manager { uint32 passkey = DEFAULT_PASSCODE; uint8 pairMode = DEFAULT_PAIRING_MODE; uint8 mitm = DEFAULT_MITM_MODE; uint8 ioCap = DEFAULT_IO_CAPABILITIES; uint8 bonding = DEFAULT_BONDING_MODE; GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof( uint32 ), &passkey ); GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof( uint8 ), &pairMode ); GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof( uint8 ), &mitm ); GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof( uint8 ), &ioCap ); GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof( uint8 ), &bonding ); } // Initialize GATT Client VOID GATT_InitClient(); // Register to receive incoming ATT Indications/Notifications GATT_RegisterForInd( simpleBLETaskId ); // Initialize GATT attributes GGS_AddService( GATT_ALL_SERVICES ); // GAP GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes // Register for all key events - This app will handle all key events RegisterForKeys( simpleBLETaskId ); // makes sure LEDs are off HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF ); // Setup a delayed profile startup osal_set_event( simpleBLETaskId, START_DEVICE_EVT ); }
void SwitchCentral_Init( void ){ uint8 scanRes = MAX_SCAN_RES; GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes ); GAP_SetParamValue( TGAP_GEN_DISC_SCAN, SCAN_DURATION ); GAP_SetParamValue( TGAP_LIM_DISC_SCAN, SCAN_DURATION ); //static varibles initiation send_record=0; HandleRangeStart = 0; HandleRangeEnd = 0; simpleBLEScanRes=0; // for(uint8 i=0; i<MAX_SCAN_RES; ++i) // osal_memcpy( simpleBLEDevList[i].addr, 0, B_ADDR_LEN ); }
/********************************************************************* * @fn SimpleBLECentral_Init * * @brief Initialization function for the Simple BLE Central App Task. * This is called during initialization and should contain * any application specific initialization (ie. hardware * initialization/setup, table initialization, power up * notification). * * @param task_id - the ID assigned by OSAL. This ID should be * used to send messages and set timers. * * @return none */ void SimpleBLECentral_Init( uint8 task_id ) { simpleBLETaskId = task_id; // Setup Central Profile { uint8 scanRes = DEFAULT_MAX_SCAN_RES; GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes ); } // Setup GAP GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION ); GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION ); GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, (uint8 *) simpleBLEDeviceName ); // Setup the GAP Bond Manager { uint32 passkey = DEFAULT_PASSCODE; uint8 pairMode = DEFAULT_PAIRING_MODE; uint8 mitm = DEFAULT_MITM_MODE; uint8 ioCap = DEFAULT_IO_CAPABILITIES; uint8 bonding = DEFAULT_BONDING_MODE; GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof( uint32 ), &passkey ); GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof( uint8 ), &pairMode ); GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof( uint8 ), &mitm ); GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof( uint8 ), &ioCap ); GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof( uint8 ), &bonding ); } // Initialize GATT Client VOID GATT_InitClient(); // Register to receive incoming ATT Indications/Notifications GATT_RegisterForInd( simpleBLETaskId ); // Initialize GATT attributes GGS_AddService( GATT_ALL_SERVICES ); // GAP GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes // Register for all key events - This app will handle all key events RegisterForKeys( simpleBLETaskId ); // makes sure LEDs are off HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF ); // Setup a delayed profile startup osal_set_event( simpleBLETaskId, START_DEVICE_EVT ); /* { //w5500_read_server_mac(); w5500_read_server_ip(); uint32 nest=0; if(w5500_check_link()) { w5500_socket_send_cmd(SOCKET_IDEX_0,SOCKET_CMD_OPEN); do { if(nest>20000) { w5500_socket_handle_status(w5500_socket_read_status(SOCKET_IDEX_0)); nest=0; } nest++; } while(w5500_socket_state!= SOCKET_INIT); w5500_socket_send_cmd(SOCKET_IDEX_0,SOCKET_CMD_CONNECT); do { if(nest>20000) { w5500_socket_handle_status(w5500_socket_read_status(SOCKET_IDEX_0)); nest=0; } nest++; } while(w5500_socket_state!=SOCK_ESTABLISHED); do { if(nest>20000) { w5500_socket_send(SOCKET_IDEX_0,"hello wkxboot!!",15); w5500_read_server_mac(); w5500_read_server_ip(); w5500_socket_handle_int(SOCKET_IDEX_0); nest=0; } nest++; } while(1); } } */ }
/******************************************************************************* * * @fn hidappInit * * @brief This is the Sample Application task initialization called by OSAL. * * @param taskId - task ID assigned after it was added in the OSAL task queue * * @return none */ void Hidapp_Init( uint8 taskId ) { // save task ID assigned by OSAL hidappTaskId = taskId; // Setup Central Profile { uint8 scanRes = DEFAULT_MAX_SCAN_RES; VOID GAPCentralRole_SetParameter( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes ); } // Setup GAP { VOID GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION ); VOID GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION ); // Set scanning interval, 48 = 30ms VOID GAP_SetParamValue( TGAP_LIM_DISC_SCAN_INT, 48 ); // Set scannng window, 48 = 30ms VOID GAP_SetParamValue( TGAP_LIM_DISC_SCAN_WIND, 48 ); } // Setup the GAP Bond Manager { uint32 passkey = DEFAULT_PASSCODE; uint8 pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ; uint8 mitm = DEFAULT_MITM_MODE; uint8 ioCap = DEFAULT_IO_CAPABILITIES; uint8 bonding = DEFAULT_BONDING_MODE; uint8 autoSync = TRUE; uint8 bondFailAction = GAPBOND_FAIL_TERMINATE_ERASE_BONDS; VOID GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof( uint32 ), &passkey ); VOID GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof( uint8 ), &pairMode ); VOID GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof( uint8 ), &mitm ); VOID GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof( uint8 ), &ioCap ); VOID GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof( uint8 ), &bonding ); VOID GAPBondMgr_SetParameter( GAPBOND_AUTO_SYNC_WL, sizeof( uint8 ), &autoSync ); VOID GAPBondMgr_SetParameter( GAPBOND_BOND_FAIL_ACTION, sizeof( uint8 ), &bondFailAction ); } // USB suspend entry/exit hook function setup pFnSuspendEnterHook = hidappSuspendEnter; pFnSuspendExitHook = hidappSuspendExit; // Initialize GATT Client VOID GATT_InitClient(); // Register to receive notifications GATT_RegisterForInd( hidappTaskId ); // Set connection parameters: { uint16 connectionInterval = APP_CONN_INTERVAL; uint16 slaveLatency = APP_SLAVE_LATENCY; uint16 timeout = APP_CONN_TIMEOUT; VOID GAP_SetParamValue( TGAP_CONN_EST_INT_MIN, connectionInterval ); VOID GAP_SetParamValue( TGAP_CONN_EST_INT_MAX, connectionInterval ); VOID GAP_SetParamValue( TGAP_CONN_EST_LATENCY, slaveLatency ); VOID GAP_SetParamValue( TGAP_CONN_EST_SUPERV_TIMEOUT, timeout ); } // Register callbacks with the GAP Bond Manager. GAPBondMgr_Register( &gapBondCBs ); //HalKeyConfig(HAL_KEY_INTERRUPT_ENABLE, hidappHandleKeys); RegisterForKeys( hidappTaskId ); // set up continued initialization from within OSAL task loop VOID osal_start_timerEx( taskId, HIDAPP_EVT_START, 100 ); // Clear remote data hidappEraseHandles(); VOID HCI_EXT_HaltDuringRfCmd( HCI_EXT_HALT_DURING_RF_DISABLE ); }
/********************************************************************* * @fn glucCollCentral_Init * * @brief Initialization function for the Glucose Collector App Task. * This is called during initialization and should contain * any application specific initialization (ie. hardware * initialization/setup, table initialization, power up * notification). * * * @return none */ static void glucCollCentral_Init() { // ****************************************************************** // N0 STACK API CALLS CAN OCCUR BEFORE THIS CALL TO ICall_registerApp // ****************************************************************** // Register the current thread as an ICall dispatcher application // so that the application can send and receive messages. ICall_registerApp(&selfEntity, &sem); // Set device's Sleep Clock Accuracy //HCI_EXT_SetSCACmd(40); // Save the taskId glucCollTaskId = selfEntity; // Create an RTOS queue for message from profile to be sent to app. appMsgQueue = Util_constructQueue(&appMsg); Board_openLCD(); // Create clock objects for discovery and procedure timeout Util_constructClock(&discoveryClock, glucCollCentral_clockHandler, DEFAULT_SVC_DISCOVERY_DELAY, 0, false, GLUCOLL_START_DISCOVERY_EVT); Util_constructClock(&procTimeoutClock, glucCollCentral_clockHandler, GLUCOSE_PROCEDURE_TIMEOUT, 0, false, GLUCOLL_PROCEDURE_TIMEOUT_EVT); // Setup Central Profile { uint8_t scanRes = DEFAULT_MAX_SCAN_RES; GAPCentralRole_SetParameter (GAPCENTRALROLE_MAX_SCAN_RES, sizeof(uint8_t), &scanRes); } // Setup GAP GAP_SetParamValue(TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION); GAP_SetParamValue(TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION); GGS_SetParameter(GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, (uint8_t *)glucCollDeviceName); // Setup the GAP Bond Manager { uint32_t passkey = DEFAULT_PASSCODE; uint8_t pairMode = DEFAULT_PAIRING_MODE; uint8_t mitm = DEFAULT_MITM_MODE; uint8_t ioCap = DEFAULT_IO_CAPABILITIES; uint8_t bonding = DEFAULT_BONDING_MODE; GAPBondMgr_SetParameter(GAPBOND_DEFAULT_PASSCODE, sizeof(uint32_t), &passkey); GAPBondMgr_SetParameter(GAPBOND_PAIRING_MODE, sizeof(uint8_t), &pairMode); GAPBondMgr_SetParameter(GAPBOND_MITM_PROTECTION, sizeof(uint8_t), &mitm); GAPBondMgr_SetParameter(GAPBOND_IO_CAPABILITIES, sizeof(uint8_t), &ioCap); GAPBondMgr_SetParameter(GAPBOND_BONDING_ENABLED, sizeof(uint8_t), &bonding); } // Initialize GATT Client VOID GATT_InitClient(); // Register to receive incoming ATT Indications/Notifications GATT_RegisterForInd(glucCollTaskId); // Initialize GATT attributes GGS_AddService(GATT_ALL_SERVICES); // GAP GATTServApp_AddService(GATT_ALL_SERVICES); // GATT attributes // Register for all key events - This app will handle all key events Board_initKeys(glucCollCentral_keyChangeHandler); // Register with bond manager after starting device GAPBondMgr_Register((gapBondCBs_t *)&glucCollBondCB); // Start the Device VOID GAPCentralRole_StartDevice((gapCentralRoleCB_t *)&glucCollRoleCB); }
/********************************************************************* * @fn SimpleBLECentral_Init * * @brief Initialization function for the Simple BLE Central App Task. * This is called during initialization and should contain * any application specific initialization (ie. hardware * initialization/setup, table initialization, power up * notification). * * @param task_id - the ID assigned by OSAL. This ID should be * used to send messages and set timers. * * @return none */ void SimpleBLECentral_Init( uint8 task_id ) { simpleBLETaskId = task_id; HalAdcInit(); LCD_WRITE_STRING( "CentralHop 1", HAL_LCD_LINE_1 ); ////////////////////////////////////////////////////////////////// // Broadcaster // Setup the GAP Broadcaster Role Profile { #if defined( CC2540_MINIDK ) // For the CC2540DK-MINI keyfob, device doesn't start advertising until button is pressed uint8 initial_advertising_enable = FALSE; #else // For other hardware platforms, device starts advertising upon initialization uint8 initial_advertising_enable = TRUE; #endif // By setting this to zero, the device will go into the waiting state after // being discoverable for 30.72 second, and will not being advertising again // until the enabler is set back to TRUE uint16 gapRole_AdvertOffTime = 0; //uint8 advType = GAP_ADTYPE_ADV_NONCONN_IND; // use non-connectable advertisements uint8 advType = GAP_ADTYPE_ADV_SCAN_IND; // use scannable unidirected advertisements // Set the GAP Role Parameters GAPRole_SetParameter( GAPROLE_ADVERT_ENABLED, sizeof( uint8 ), &initial_advertising_enable ); GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime ); GAPRole_SetParameter( GAPROLE_ADVERT_DATA, sizeof( advertData ), advertData ); GAPRole_SetParameter( GAPROLE_ADV_EVENT_TYPE, sizeof( uint8 ), &advType ); } // Set advertising interval { uint16 advInt = DEFAULT_ADVERTISING_INTERVAL; GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MIN, advInt ); GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MAX, advInt ); GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MIN, advInt ); GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MAX, advInt ); } ////////////////////////////////////////////////////////////// // Central // Setup Central Profile { uint8 scanRes = DEFAULT_MAX_SCAN_RES; GAPCentralRole_SetParameter ( GAPCENTRALROLE_MAX_SCAN_RES, sizeof( uint8 ), &scanRes ); } // Setup GAP GAP_SetParamValue( TGAP_GEN_DISC_SCAN, DEFAULT_SCAN_DURATION ); GAP_SetParamValue( TGAP_LIM_DISC_SCAN, DEFAULT_SCAN_DURATION ); GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, (uint8 *) simpleBLEDeviceName ); // Setup the GAP Bond Manager { uint32 passkey = DEFAULT_PASSCODE; uint8 pairMode = DEFAULT_PAIRING_MODE; uint8 mitm = DEFAULT_MITM_MODE; uint8 ioCap = DEFAULT_IO_CAPABILITIES; uint8 bonding = DEFAULT_BONDING_MODE; GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof( uint32 ), &passkey ); GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof( uint8 ), &pairMode ); GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof( uint8 ), &mitm ); GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof( uint8 ), &ioCap ); GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof( uint8 ), &bonding ); } // Initialize GATT Client VOID GATT_InitClient(); // Register to receive incoming ATT Indications/Notifications GATT_RegisterForInd( simpleBLETaskId ); // Initialize GATT attributes GGS_AddService( GATT_ALL_SERVICES ); // GAP GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes // Register for all key events - This app will handle all key events RegisterForKeys( simpleBLETaskId ); // makes sure LEDs are off HalLedSet( (HAL_LED_1 | HAL_LED_2), HAL_LED_MODE_OFF ); // Setup a delayed profile startup osal_set_event( simpleBLETaskId, START_DEVICE_EVT ); }