void DIALOG_DESIGN_RULES::InitGlobalRules()
{
AddUnitSymbol( *m_ViaMinTitle );
AddUnitSymbol( *m_ViaMinDrillTitle );
AddUnitSymbol( *m_MicroViaMinSizeTitle );
AddUnitSymbol( *m_MicroViaMinDrillTitle );
AddUnitSymbol( *m_TrackMinWidthTitle );
PutValueInLocalUnits( *m_SetViasMinSizeCtrl, m_BrdSettings->m_ViasMinSize );
PutValueInLocalUnits( *m_SetViasMinDrillCtrl, m_BrdSettings->m_ViasMinDrill );
if( m_BrdSettings->m_BlindBuriedViaAllowed )
m_OptViaType->SetSelection( 1 );
m_AllowMicroViaCtrl->SetSelection( m_BrdSettings->m_MicroViasAllowed ? 1 : 0 );
PutValueInLocalUnits( *m_SetMicroViasMinSizeCtrl, m_BrdSettings->m_MicroViasMinSize );
PutValueInLocalUnits( *m_SetMicroViasMinDrillCtrl, m_BrdSettings->m_MicroViasMinDrill );
PutValueInLocalUnits( *m_SetTrackMinWidthCtrl, m_BrdSettings->m_TrackMinWidth );
// Initialize Vias and Tracks sizes lists.
// note we display only extra values, never the current netclass value.
// (the first value in history list)
m_TracksWidthList = m_BrdSettings->m_TrackWidthList;
m_TracksWidthList.erase( m_TracksWidthList.begin() ); // remove the netclass value
m_ViasDimensionsList = m_BrdSettings->m_ViasDimensionsList;
m_ViasDimensionsList.erase( m_ViasDimensionsList.begin() ); // remove the netclass value
InitDimensionsLists();
}
void DIALOG_MOVE_EXACT::OnPolarChanged( wxCommandEvent& event )
{
bool newPolar = m_polarCoords->IsChecked();
updateDlgTexts( newPolar );
wxPoint val;
// get the value as previously stored
GetTranslationInIU( val, !newPolar );
if( newPolar )
{
// convert to polar coordinates
double r, q;
ToPolarDeg( val.x, val.y, r, q);
PutValueInLocalUnits( *m_xEntry, round( r / 10.0) * 10 );
m_yEntry->SetValue( wxString::FromDouble( q ) );
}
else
{
// vector is already in Cartesian, so just render out
// note - round off the last decimal place (10nm) to prevent
// (some) rounding causing errors when round-tripping
// you can never eliminate entirely, however
PutValueInLocalUnits( *m_xEntry, KiROUND( val.x / 10.0) * 10 );
PutValueInLocalUnits( *m_yEntry, KiROUND( val.y / 10.0) * 10 );
}
Layout();
}
DIALOG_DIMENSION_EDITOR::DIALOG_DIMENSION_EDITOR( PCB_EDIT_FRAME* aParent,
DIMENSION* aDimension, wxDC* aDC ) :
DIALOG_DIMENSION_EDITOR_BASE( aParent )
{
SetFocus();
m_Parent = aParent;
m_DC = aDC;
CurrentDimension = aDimension;
if( aDimension->Text().IsMirrored() )
m_rbMirror->SetSelection( 1 );
else
m_rbMirror->SetSelection( 0 );
m_Name->SetValue( aDimension->Text().GetText() );
// Enter size value in dialog
PutValueInLocalUnits( *m_TxtSizeXCtrl, aDimension->Text().GetSize().x );
AddUnitSymbol( *m_staticTextSizeX );
PutValueInLocalUnits( *m_TxtSizeYCtrl, aDimension->Text().GetSize().y );
AddUnitSymbol( *m_staticTextSizeY );
// Enter lines thickness value in dialog
PutValueInLocalUnits( *m_TxtWidthCtrl, aDimension->GetWidth() );
AddUnitSymbol( *m_staticTextWidth );
// Enter position value in dialog
PutValueInLocalUnits( *m_textCtrlPosX, aDimension->Text().GetTextPosition().x );
AddUnitSymbol( *m_staticTextPosX );
PutValueInLocalUnits( *m_textCtrlPosY, aDimension->Text().GetTextPosition().y );
AddUnitSymbol( *m_staticTextPosY );
// Configure the layers list selector
if( !m_Parent->GetBoard()->IsLayerEnabled( aDimension->GetLayer() ) )
// Should not happens, because one cannot select a board item on a
// not activated layer, but ...
m_SelLayerBox->ShowNonActivatedLayers( true );
m_SelLayerBox->SetLayersHotkeys( false );
m_SelLayerBox->SetLayerSet( LSET::AllCuMask().set( Edge_Cuts ) );
m_SelLayerBox->SetBoardFrame( m_Parent );
m_SelLayerBox->Resync();
if( m_SelLayerBox->SetLayerSelection( aDimension->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item has an illegal layer id.\n"
"Now, forced on the drawings layer. Please, fix it" ) );
m_SelLayerBox->SetLayerSelection( Dwgs_User );
}
SetDefaultItem( m_sdbSizerBtsOK );
GetSizer()->Fit( this );
GetSizer()->SetSizeHints( this );
Centre();
}
void DIALOG_DRC_CONTROL::DisplayDRCValues()
{
m_TrackMinWidthUnit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_ViaMinUnit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_MicroViaMinUnit->SetLabel(GetAbbreviatedUnitsLabel( g_UserUnit ) );
PutValueInLocalUnits( *m_SetTrackMinWidthCtrl, m_BrdSettings.m_TrackMinWidth );
PutValueInLocalUnits( *m_SetViaMinSizeCtrl, m_BrdSettings.m_ViasMinSize );
PutValueInLocalUnits( *m_SetMicroViakMinSizeCtrl, m_BrdSettings.m_MicroViasMinSize );
}
DIALOG_DIMENSION_EDITOR::DIALOG_DIMENSION_EDITOR( PCB_EDIT_FRAME* aParent,
DIMENSION* aDimension, wxDC* aDC ) :
DIALOG_DIMENSION_EDITOR_BASE( aParent )
{
SetFocus();
m_Parent = aParent;
m_DC = aDC;
CurrentDimension = aDimension;
if( aDimension->Text().IsMirrored() )
m_rbMirror->SetSelection( 1 );
else
m_rbMirror->SetSelection( 0 );
m_Name->SetValue( aDimension->Text().GetText() );
// Enter size value in dialog
PutValueInLocalUnits( *m_TxtSizeXCtrl, aDimension->Text().GetSize().x );
AddUnitSymbol( *m_staticTextSizeX );
PutValueInLocalUnits( *m_TxtSizeYCtrl, aDimension->Text().GetSize().y );
AddUnitSymbol( *m_staticTextSizeY );
// Enter lines thickness value in dialog
PutValueInLocalUnits( *m_TxtWidthCtrl, aDimension->GetWidth() );
AddUnitSymbol( *m_staticTextWidth );
// Enter position value in dialog
PutValueInLocalUnits( *m_textCtrlPosX, aDimension->Text().GetTextPosition().x );
AddUnitSymbol( *m_staticTextPosX );
PutValueInLocalUnits( *m_textCtrlPosY, aDimension->Text().GetTextPosition().y );
AddUnitSymbol( *m_staticTextPosY );
// Configure the layers list selector
m_SelLayerBox->SetLayersHotkeys( false );
m_SelLayerBox->SetLayerMask( ALL_CU_LAYERS | EDGE_LAYER );
m_SelLayerBox->SetBoardFrame( m_Parent );
m_SelLayerBox->Resync();
if( m_SelLayerBox->SetLayerSelection( aDimension->GetLayer() ) < 0 )
{
wxMessageBox( _("This item has an illegal layer id.\n"
"Now, forced on the drawings layer. Please, fix it") );
m_SelLayerBox->SetLayerSelection( DRAW_N );
}
GetSizer()->Fit( this );
GetSizer()->SetSizeHints( this );
Centre();
}
void WinEDA_TextModPropertiesFrame::SetDisplayValue(void)
/********************************************************/
{
wxString msg;
if ( m_Module )
{
wxString format = m_ModuleInfoText->GetLabel();
msg.Printf( format,
m_Module->m_Reference->m_Text.GetData(),
m_Module->m_Value->m_Text.GetData(),
(float)(m_Module->m_Orient/10) );
m_ModuleInfoText->SetLabel(msg);
}
if(m_CurrentTextMod->m_Type == TEXT_is_VALUE) m_TextDataTitle->SetLabel(_("Value:"));
else if(m_CurrentTextMod->m_Type == TEXT_is_DIVERS) m_TextDataTitle->SetLabel(_("Text:"));
else if(m_CurrentTextMod->m_Type != TEXT_is_REFERENCE) m_TextDataTitle->SetLabel(wxT("???"));
m_Name->SetValue(m_CurrentTextMod->m_Text);
AddUnitSymbol(*m_SizeXTitle);
PutValueInLocalUnits(*m_TxtSizeCtrlX, m_CurrentTextMod->m_Size.x,
m_Parent->m_InternalUnits);
AddUnitSymbol(*m_SizeYTitle);
PutValueInLocalUnits(*m_TxtSizeCtrlY, m_CurrentTextMod->m_Size.y,
m_Parent->m_InternalUnits);
AddUnitSymbol(*m_PosXTitle);
PutValueInLocalUnits(*m_TxtPosCtrlX, m_CurrentTextMod->m_Pos0.x,
m_Parent->m_InternalUnits);
AddUnitSymbol(*m_PosYTitle);
PutValueInLocalUnits(*m_TxtPosCtrlY, m_CurrentTextMod->m_Pos0.y,
m_Parent->m_InternalUnits);
AddUnitSymbol(*m_WidthTitle);
PutValueInLocalUnits(*m_TxtWidthCtlr, m_CurrentTextMod->m_Width,
m_Parent->m_InternalUnits);
if ( (m_CurrentTextMod->m_Orient != 0) && (m_CurrentTextMod->m_Orient != 1800) &&
(m_CurrentTextMod->m_Orient != -1800) )
m_Orient->SetSelection(1);;
if ( m_CurrentTextMod->m_NoShow ) m_Show->SetSelection(1);;
}
WinEDA_SheetPropertiesFrame::WinEDA_SheetPropertiesFrame( WinEDA_SchematicFrame* parent,
DrawSheetStruct * currentsheet,
wxWindowID id, const wxString& caption,
const wxPoint& pos, const wxSize& size, long style )
{
m_Parent = parent;
m_CurrentSheet = currentsheet;
Create(parent, id, caption, pos, size, style);
AddUnitSymbol(*m_SheetNameTextSize);
PutValueInLocalUnits(*m_SheetNameSize,m_CurrentSheet->m_Field[VALUE].m_Size.x,
m_Parent->m_InternalUnits);
AddUnitSymbol(*m_FileNameTextSize);
PutValueInLocalUnits(*m_FileNameSize,
m_CurrentSheet->m_Field[SHEET_FILENAME].m_Size.x,
m_Parent->m_InternalUnits);
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::OnLayerChoice( wxCommandEvent& event )
{
int thickness;
if( m_LayerSelectionCtrl->GetLayerSelection() == Edge_Cuts )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness );
}
WinEDA_DrcFrame::WinEDA_DrcFrame( WinEDA_PcbFrame* parent, wxDC * panelDC,
wxWindowID id, const wxString& caption, const wxPoint& pos, const wxSize& size, long style )
{
m_Parent = parent;
m_DC = panelDC;
AbortDrc = FALSE;
Create(parent, id, caption, pos, size, style);
PutValueInLocalUnits(*m_SetClearance, g_DesignSettings.m_TrackClearence,
m_Parent->m_InternalUnits);
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::OnLayerChoice( wxCommandEvent& event )
/*******************************************************************/
{
int thickness;
if( (m_LayerSelectionCtrl->GetCurrentSelection() + FIRST_NO_COPPER_LAYER) == EDGE_N )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness,
m_parent->GetInternalUnits() );
}
void DRC::ShowDialog()
{
if( !m_ui )
{
m_ui = new DIALOG_DRC_CONTROL( this, m_mainWindow );
updatePointers();
// copy data retained in this DRC object into the m_ui DrcPanel:
PutValueInLocalUnits( *m_ui->m_SetTrackMinWidthCtrl,
m_pcb->GetDesignSettings().m_TrackMinWidth );
PutValueInLocalUnits( *m_ui->m_SetViaMinSizeCtrl,
m_pcb->GetDesignSettings().m_ViasMinSize );
PutValueInLocalUnits( *m_ui->m_SetMicroViakMinSizeCtrl,
m_pcb->GetDesignSettings().m_MicroViasMinSize );
m_ui->m_CreateRptCtrl->SetValue( m_doCreateRptFile );
m_ui->m_RptFilenameCtrl->SetValue( m_rptFilename );
}
else
updatePointers();
m_ui->Show( true );
}
bool DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::TransferDataToWindow()
{
// Set unit symbol
wxStaticText* texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
};
for( size_t ii = 0; ii < DIM( texts_unit ); ii++ )
{
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch( m_item->GetShape() )
{
case S_CIRCLE:
SetTitle( _( "Circle Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Point X" ) );
m_EndPointYLabel->SetLabel( _( "Point Y" ) );
m_AngleText->Show( false );
m_AngleCtrl->Show( false );
m_AngleUnit->Show( false );
break;
case S_ARC:
SetTitle( _( "Arc Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Start Point X" ) );
m_EndPointYLabel->SetLabel( _( "Start Point Y" ) );
m_AngleValue = m_item->GetAngle() / 10.0;
break;
case S_SEGMENT:
SetTitle( _( "Line Segment Properties" ) );
// Fall through.
default:
m_AngleText->Show( false );
m_AngleCtrl->Show( false );
m_AngleUnit->Show( false );
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
PutValueInLocalUnits( *m_DefaultThicknessCtrl, m_brdSettings.m_ModuleSegmentWidth );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerSet( LSET::InternalCuMask().set( Edge_Cuts ) );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item was on an unknown layer.\n"
"It has been moved to the front silk screen layer. Please fix it." ) );
m_LayerSelectionCtrl->SetLayerSelection( F_SilkS );
}
return DIALOG_GRAPHIC_ITEM_PROPERTIES_BASE::TransferDataToWindow();
}
// Initialize the dialog options:
void DIALOG_PLOT_SCHEMATIC::initDlg()
{
SetFocus(); // make the ESC work
// Set paper size option
m_PaperSizeOption->SetSelection( m_pageSizeSelect );
// Set color or B&W plot option
bool tmp;
m_config->Read( PLOT_MODECOLOR_KEY, &tmp, true );
setModeColor( tmp );
// Set plot or not frame reference option
m_config->Read( PLOT_FRAME_REFERENCE_KEY, &tmp, true );
setPlotFrameRef( tmp );
// Set HPGL plot origin to center of paper of left bottom corner
m_config->Read( PLOT_HPGL_ORIGIN_KEY, &tmp, false );
SetPlotOriginCenter( tmp );
m_config->Read( PLOT_HPGL_PAPERSIZE_KEY, &m_HPGLPaperSizeSelect, 0 );
m_HPGLPaperSizeOption->SetSelection( m_HPGLPaperSizeSelect );
// HPGL Pen Size is stored in mm in config
m_config->Read( PLOT_HPGL_PEN_SIZE_KEY, &m_HPGLPenSize, 0.5 );
m_HPGLPenSize *= IU_PER_MM;
// Switch to the last save plot format
long plotfmt;
m_config->Read( PLOT_FORMAT_KEY, &plotfmt, 0 );
switch( plotfmt )
{
default:
case PLOT_FORMAT_POST:
m_plotFormatOpt->SetSelection( 0 );
break;
case PLOT_FORMAT_PDF:
m_plotFormatOpt->SetSelection( 1 );
break;
case PLOT_FORMAT_SVG:
m_plotFormatOpt->SetSelection( 2 );
break;
case PLOT_FORMAT_DXF:
m_plotFormatOpt->SetSelection( 3 );
break;
case PLOT_FORMAT_HPGL:
m_plotFormatOpt->SetSelection( 4 );
break;
}
// Set the default line width (pen width which should be used for
// items that do not have a pen size defined (like frame ref)
AddUnitSymbol( *m_defaultLineWidthTitle, g_UserUnit );
PutValueInLocalUnits( *m_DefaultLineSizeCtrl, GetDefaultLineThickness() );
// Initialize HPGL specific widgets
AddUnitSymbol( *m_penHPLGWidthTitle, g_UserUnit );
PutValueInLocalUnits( *m_penHPGLWidthCtrl, m_HPGLPenSize );
m_HPGLPaperSizeOption->SetSelection( m_HPGLPaperSizeSelect );
// Hide/show widgets that are not always displayed:
wxCommandEvent cmd_event;
OnPlotFormatSelection( cmd_event );
}
void DIALOG_PAD_PROPERTIES::initValues()
{
wxString msg;
double angle;
// Disable pad net name wxTextCtrl if the caller is the footprint editor
// because nets are living only in the board managed by the board editor
m_canEditNetName = m_parent->IsType( FRAME_PCB );
// Setup layers names from board
// Should be made first, before calling m_rbCopperLayersSel->SetSelection()
m_rbCopperLayersSel->SetString( 0, m_board->GetLayerName( F_Cu ) );
m_rbCopperLayersSel->SetString( 1, m_board->GetLayerName( B_Cu ) );
m_PadLayerAdhCmp->SetLabel( m_board->GetLayerName( F_Adhes ) );
m_PadLayerAdhCu->SetLabel( m_board->GetLayerName( B_Adhes ) );
m_PadLayerPateCmp->SetLabel( m_board->GetLayerName( F_Paste ) );
m_PadLayerPateCu->SetLabel( m_board->GetLayerName( B_Paste ) );
m_PadLayerSilkCmp->SetLabel( m_board->GetLayerName( F_SilkS ) );
m_PadLayerSilkCu->SetLabel( m_board->GetLayerName( B_SilkS ) );
m_PadLayerMaskCmp->SetLabel( m_board->GetLayerName( F_Mask ) );
m_PadLayerMaskCu->SetLabel( m_board->GetLayerName( B_Mask ) );
m_PadLayerECO1->SetLabel( m_board->GetLayerName( Eco1_User ) );
m_PadLayerECO2->SetLabel( m_board->GetLayerName( Eco2_User ) );
m_PadLayerDraft->SetLabel( m_board->GetLayerName( Dwgs_User ) );
m_isFlipped = false;
if( m_currentPad )
{
MODULE* footprint = m_currentPad->GetParent();
m_isFlipped = m_currentPad->IsFlipped();
if( m_isFlipped )
m_staticModuleSideValue->SetLabel( _( "Back side (footprint is mirrored)" ) );
// Diplay footprint rotation ( angles are in 0.1 degree )
msg.Printf( wxT( "%.1f" ), footprint->GetOrientation() / 10.0 );
m_staticModuleRotValue->SetLabel( msg );
}
if( m_isFlipped )
{
wxPoint pt = m_dummyPad->GetOffset();
pt.y = -pt.y;
m_dummyPad->SetOffset( pt );
wxSize sz = m_dummyPad->GetDelta();
sz.y = -sz.y;
m_dummyPad->SetDelta( sz );
// flip pad's layers
m_dummyPad->SetLayerSet( FlipLayerMask( m_dummyPad->GetLayerSet() ) );
}
m_staticTextWarningPadFlipped->Show(m_isFlipped);
m_PadNumCtrl->SetValue( m_dummyPad->GetPadName() );
m_PadNetNameCtrl->SetValue( m_dummyPad->GetNetname() );
// Set the unit name in dialog:
wxStaticText* unitTexts[] =
{
m_PadPosX_Unit, m_PadPosY_Unit,
m_PadDrill_X_Unit, m_PadDrill_Y_Unit,
m_PadShapeSizeX_Unit, m_PadShapeSizeY_Unit,
m_PadShapeOffsetX_Unit,m_PadShapeOffsetY_Unit,
m_PadShapeDelta_Unit, m_PadLengthDie_Unit,
m_NetClearanceUnits, m_SolderMaskMarginUnits, m_SolderPasteMarginUnits,
m_ThermalWidthUnits, m_ThermalGapUnits, m_staticTextCornerSizeUnit
};
for( unsigned ii = 0; ii < DIM( unitTexts ); ++ii )
unitTexts[ii]->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
// Display current pad parameters units:
PutValueInLocalUnits( *m_PadPosition_X_Ctrl, m_dummyPad->GetPosition().x );
PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, m_dummyPad->GetPosition().y );
PutValueInLocalUnits( *m_PadDrill_X_Ctrl, m_dummyPad->GetDrillSize().x );
PutValueInLocalUnits( *m_PadDrill_Y_Ctrl, m_dummyPad->GetDrillSize().y );
PutValueInLocalUnits( *m_ShapeSize_X_Ctrl, m_dummyPad->GetSize().x );
PutValueInLocalUnits( *m_ShapeSize_Y_Ctrl, m_dummyPad->GetSize().y );
PutValueInLocalUnits( *m_ShapeOffset_X_Ctrl, m_dummyPad->GetOffset().x );
PutValueInLocalUnits( *m_ShapeOffset_Y_Ctrl, m_dummyPad->GetOffset().y );
if( m_dummyPad->GetDelta().x )
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().x );
m_trapDeltaDirChoice->SetSelection( 0 );
}
else
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().y );
m_trapDeltaDirChoice->SetSelection( 1 );
}
PutValueInLocalUnits( *m_LengthPadToDieCtrl, m_dummyPad->GetPadToDieLength() );
PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_dummyPad->GetLocalClearance() );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_dummyPad->GetLocalSolderMaskMargin() );
PutValueInLocalUnits( *m_ThermalWidthCtrl, m_dummyPad->GetThermalWidth() );
PutValueInLocalUnits( *m_ThermalGapCtrl, m_dummyPad->GetThermalGap() );
// These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_dummyPad->GetLocalSolderPasteMargin() );
if( m_dummyPad->GetLocalSolderPasteMargin() == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) + m_SolderPasteMarginCtrl->GetValue() );
msg.Printf( wxT( "%f" ), m_dummyPad->GetLocalSolderPasteMarginRatio() * 100.0 );
if( m_dummyPad->GetLocalSolderPasteMarginRatio() == 0.0 && msg[0] == '0' )
// Sometimes Printf adds a sign if the value is small
m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
switch( m_dummyPad->GetZoneConnection() )
{
default:
case PAD_ZONE_CONN_INHERITED:
m_ZoneConnectionChoice->SetSelection( 0 );
break;
case PAD_ZONE_CONN_FULL:
m_ZoneConnectionChoice->SetSelection( 1 );
break;
case PAD_ZONE_CONN_THERMAL:
m_ZoneConnectionChoice->SetSelection( 2 );
break;
case PAD_ZONE_CONN_NONE:
m_ZoneConnectionChoice->SetSelection( 3 );
break;
}
if( m_currentPad )
{
MODULE* footprint = m_currentPad->GetParent();
angle = m_currentPad->GetOrientation() - footprint->GetOrientation();
if( m_isFlipped )
angle = -angle;
m_dummyPad->SetOrientation( angle );
}
angle = m_dummyPad->GetOrientation();
NORMALIZE_ANGLE_180( angle ); // ? normalizing is in D_PAD::SetOrientation()
// Set layers used by this pad: :
setPadLayersList( m_dummyPad->GetLayerSet() );
// Pad Orient
switch( int( angle ) )
{
case 0:
m_PadOrient->SetSelection( 0 );
break;
case 900:
m_PadOrient->SetSelection( 1 );
break;
case -900:
m_PadOrient->SetSelection( 2 );
break;
case 1800:
case -1800:
m_PadOrient->SetSelection( 3 );
break;
default:
m_PadOrient->SetSelection( 4 );
break;
}
switch( m_dummyPad->GetShape() )
{
default:
case PAD_SHAPE_CIRCLE:
m_PadShape->SetSelection( CHOICE_SHAPE_CIRCLE );
break;
case PAD_SHAPE_OVAL:
m_PadShape->SetSelection( CHOICE_SHAPE_OVAL );
break;
case PAD_SHAPE_RECT:
m_PadShape->SetSelection( CHOICE_SHAPE_RECT );
break;
case PAD_SHAPE_TRAPEZOID:
m_PadShape->SetSelection( CHOICE_SHAPE_TRAPEZOID );
break;
case PAD_SHAPE_ROUNDRECT:
m_PadShape->SetSelection( CHOICE_SHAPE_ROUNDRECT );
break;
}
m_OrientValue = angle / 10.0;
// Type of pad selection
m_PadType->SetSelection( 0 );
for( unsigned ii = 0; ii < DIM( code_type ); ii++ )
{
if( code_type[ii] == m_dummyPad->GetAttribute() )
{
m_PadType->SetSelection( ii );
break;
}
}
// Enable/disable Pad name,and pad length die
// (disable for NPTH pads (mechanical pads)
bool enable = m_dummyPad->GetAttribute() != PAD_ATTRIB_HOLE_NOT_PLATED;
m_PadNumCtrl->Enable( enable );
m_PadNetNameCtrl->Enable( m_canEditNetName && enable && m_currentPad != NULL );
m_LengthPadToDieCtrl->Enable( enable );
if( m_dummyPad->GetDrillShape() != PAD_DRILL_SHAPE_OBLONG )
m_DrillShapeCtrl->SetSelection( 0 );
else
m_DrillShapeCtrl->SetSelection( 1 );
// Update some dialog widgets state (Enable/disable options):
wxCommandEvent cmd_event;
setPadLayersList( m_dummyPad->GetLayerSet() );
OnDrillShapeSelected( cmd_event );
OnPadShapeSelection( cmd_event );
updateRoundRectCornerValues();
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::initDlg()
{
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText* texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch( m_item->GetShape() )
{
case S_CIRCLE:
SetTitle( _( "Circle Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Point X" ) );
m_EndPointYLabel->SetLabel( _( "Point Y" ) );
m_Angle_Text->Show( false );
m_Angle_Ctrl->Show( false );
m_AngleUnit->Show( false );
break;
case S_ARC:
SetTitle( _( "Arc Properties" ) );
m_StartPointXLabel->SetLabel( _( "Center X" ) );
m_StartPointYLabel->SetLabel( _( "Center Y" ) );
m_EndPointXLabel->SetLabel( _( "Start Point X" ) );
m_EndPointYLabel->SetLabel( _( "Start Point Y" ) );
// Here the angle is a double, but the UI is still working with integers.
msg << int( m_item->GetAngle() );
m_Angle_Ctrl->SetValue( msg );
break;
case S_SEGMENT:
SetTitle( _( "Line Segment Properties" ) );
// Fall through.
default:
m_Angle_Text->Show( false );
m_Angle_Ctrl->Show( false );
m_AngleUnit->Show( false );
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
int thickness;
if( m_item->GetLayer() == Edge_Cuts )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerSet( LSET::AllCuMask() );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item was on an unknown layer.\n"
"It has been moved to the drawings layer. Please fix it." ) );
m_LayerSelectionCtrl->SetLayerSelection( Dwgs_User );
}
}
void DIALOG_GRAPHIC_ITEM_PROPERTIES::initDlg( )
/**************************************************************************/
/* Initialize messages and values in text control,
* according to the item parameters values
*/
{
SetFocus();
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText * texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch ( m_Item->GetShape() )
{
case S_CIRCLE:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Point X"));
m_EndPointYLabel->SetLabel(_("Point Y"));
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
case S_ARC:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Start Point X"));
m_EndPointYLabel->SetLabel(_("Start Point Y"));
msg << m_Item->GetAngle();
m_Angle_Ctrl->SetValue(msg);
break;
default:
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_Item->GetStart().x,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_Item->GetStart().y,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_Item->GetEnd().x,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_EndY_Ctrl, m_Item->GetEnd().y,
m_parent->GetInternalUnits() );
PutValueInLocalUnits( *m_ThicknessCtrl, m_Item->GetWidth(),
m_parent->GetInternalUnits() );
int thickness;
if( m_Item->GetLayer() == EDGE_N )
thickness = m_brdSettings.m_EdgeSegmentWidth;
else
thickness = m_brdSettings.m_DrawSegmentWidth;
PutValueInLocalUnits( *m_DefaultThicknessCtrl, thickness,
m_parent->GetInternalUnits() );
for( int layer=FIRST_NO_COPPER_LAYER; layer <= LAST_NO_COPPER_LAYER; ++layer )
{
m_LayerSelectionCtrl->Append( m_parent->GetBoard()->GetLayerName( layer ) );
}
int layer = m_Item->GetLayer();
// Control:
if ( layer < FIRST_NO_COPPER_LAYER )
layer = FIRST_NO_COPPER_LAYER;
if ( layer > LAST_NO_COPPER_LAYER )
layer = LAST_NO_COPPER_LAYER;
m_LayerSelectionCtrl->SetSelection( layer - FIRST_NO_COPPER_LAYER );
}
void DIALOG_PAD_PROPERTIES::initValues()
{
wxString msg;
double angle;
// Setup layers names from board
// Should be made first, before calling m_rbCopperLayersSel->SetSelection()
m_rbCopperLayersSel->SetString( 0, m_board->GetLayerName( LAYER_N_FRONT ) );
m_rbCopperLayersSel->SetString( 1, m_board->GetLayerName( LAYER_N_BACK ) );
m_PadLayerAdhCmp->SetLabel( m_board->GetLayerName( ADHESIVE_N_FRONT ) );
m_PadLayerAdhCu->SetLabel( m_board->GetLayerName( ADHESIVE_N_BACK ) );
m_PadLayerPateCmp->SetLabel( m_board->GetLayerName( SOLDERPASTE_N_FRONT ) );
m_PadLayerPateCu->SetLabel( m_board->GetLayerName( SOLDERPASTE_N_BACK ) );
m_PadLayerSilkCmp->SetLabel( m_board->GetLayerName( SILKSCREEN_N_FRONT ) );
m_PadLayerSilkCu->SetLabel( m_board->GetLayerName( SILKSCREEN_N_BACK ) );
m_PadLayerMaskCmp->SetLabel( m_board->GetLayerName( SOLDERMASK_N_FRONT ) );
m_PadLayerMaskCu->SetLabel( m_board->GetLayerName( SOLDERMASK_N_BACK ) );
m_PadLayerECO1->SetLabel( m_board->GetLayerName( ECO1_N ) );
m_PadLayerECO2->SetLabel( m_board->GetLayerName( ECO2_N ) );
m_PadLayerDraft->SetLabel( m_board->GetLayerName( DRAW_N ) );
m_isFlipped = false;
if( m_currentPad )
{
MODULE* module = m_currentPad->GetParent();
if( module->GetLayer() == LAYER_N_BACK )
{
m_isFlipped = true;
m_staticModuleSideValue->SetLabel( _( "Back side (footprint is mirrored)" ) );
}
msg.Printf( wxT( "%.1f" ), module->GetOrientation() / 10.0 );
m_staticModuleRotValue->SetLabel( msg );
}
if( m_isFlipped )
{
wxPoint pt = m_dummyPad->GetOffset();
NEGATE( pt.y );
m_dummyPad->SetOffset( pt );
wxSize sz = m_dummyPad->GetDelta();
NEGATE( sz.y );
m_dummyPad->SetDelta( sz );
// flip pad's layers
m_dummyPad->SetLayerMask( FlipLayerMask( m_dummyPad->GetLayerMask() ) );
}
m_staticTextWarningPadFlipped->Show(m_isFlipped);
m_PadNumCtrl->SetValue( m_dummyPad->GetPadName() );
m_PadNetNameCtrl->SetValue( m_dummyPad->GetNetname() );
// Display current unit name in dialog:
m_PadPosX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadPosY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadDrill_X_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadDrill_Y_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeSizeX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeSizeY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeOffsetX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeOffsetY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeDelta_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadLengthDie_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
// Display current pad masks clearances units
m_NetClearanceUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderMaskMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderPasteMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_ThermalWidthUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_ThermalGapUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
// Display current pad parameters units:
PutValueInLocalUnits( *m_PadPosition_X_Ctrl, m_dummyPad->GetPosition().x );
PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, m_dummyPad->GetPosition().y );
PutValueInLocalUnits( *m_PadDrill_X_Ctrl, m_dummyPad->GetDrillSize().x );
PutValueInLocalUnits( *m_PadDrill_Y_Ctrl, m_dummyPad->GetDrillSize().y );
PutValueInLocalUnits( *m_ShapeSize_X_Ctrl, m_dummyPad->GetSize().x );
PutValueInLocalUnits( *m_ShapeSize_Y_Ctrl, m_dummyPad->GetSize().y );
PutValueInLocalUnits( *m_ShapeOffset_X_Ctrl, m_dummyPad->GetOffset().x );
PutValueInLocalUnits( *m_ShapeOffset_Y_Ctrl, m_dummyPad->GetOffset().y );
if( m_dummyPad->GetDelta().x )
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().x );
m_trapDeltaDirChoice->SetSelection( 0 );
}
else
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().y );
m_trapDeltaDirChoice->SetSelection( 1 );
}
PutValueInLocalUnits( *m_LengthPadToDieCtrl, m_dummyPad->GetPadToDieLength() );
PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_dummyPad->GetLocalClearance() );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_dummyPad->GetLocalSolderMaskMargin() );
PutValueInLocalUnits( *m_ThermalWidthCtrl, m_dummyPad->GetThermalWidth() );
PutValueInLocalUnits( *m_ThermalGapCtrl, m_dummyPad->GetThermalGap() );
// These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_dummyPad->GetLocalSolderPasteMargin() );
if( m_dummyPad->GetLocalSolderPasteMargin() == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) + m_SolderPasteMarginCtrl->GetValue() );
msg.Printf( wxT( "%f" ), m_dummyPad->GetLocalSolderPasteMarginRatio() * 100.0 );
if( m_dummyPad->GetLocalSolderPasteMarginRatio() == 0.0 && msg[0] == '0' )
// Sometimes Printf adds a sign if the value is small
m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
switch( m_dummyPad->GetZoneConnection() )
{
default:
case UNDEFINED_CONNECTION:
m_ZoneConnectionChoice->SetSelection( 0 );
break;
case PAD_IN_ZONE:
m_ZoneConnectionChoice->SetSelection( 1 );
break;
case THERMAL_PAD:
m_ZoneConnectionChoice->SetSelection( 2 );
break;
case PAD_NOT_IN_ZONE:
m_ZoneConnectionChoice->SetSelection( 3 );
break;
}
if( m_currentPad )
{
MODULE* module = m_currentPad->GetParent();
angle = m_currentPad->GetOrientation() - module->GetOrientation();
if( m_isFlipped )
NEGATE( angle );
m_dummyPad->SetOrientation( angle );
}
angle = m_dummyPad->GetOrientation();
NORMALIZE_ANGLE_180( angle ); // ? normalizing is in D_PAD::SetOrientation()
// Set layers used by this pad: :
setPadLayersList( m_dummyPad->GetLayerMask() );
// Pad Orient
switch( int( angle ) )
{
case 0:
m_PadOrient->SetSelection( 0 );
break;
case 900:
m_PadOrient->SetSelection( 1 );
break;
case -900:
m_PadOrient->SetSelection( 2 );
break;
case 1800:
case -1800:
m_PadOrient->SetSelection( 3 );
break;
default:
m_PadOrient->SetSelection( 4 );
break;
}
switch( m_dummyPad->GetShape() )
{
default:
case PAD_CIRCLE:
m_PadShape->SetSelection( 0 );
break;
case PAD_OVAL:
m_PadShape->SetSelection( 1 );
break;
case PAD_RECT:
m_PadShape->SetSelection( 2 );
break;
case PAD_TRAPEZOID:
m_PadShape->SetSelection( 3 );
break;
}
msg.Printf( wxT( "%g" ), angle );
m_PadOrientCtrl->SetValue( msg );
// Type of pad selection
m_PadType->SetSelection( 0 );
for( unsigned ii = 0; ii < NBTYPES; ii++ )
{
if( CodeType[ii] == m_dummyPad->GetAttribute() )
{
m_PadType->SetSelection( ii );
break;
}
}
// Enable/disable Pad name,and pad length die
// (disable for NPTH pads (mechanical pads)
bool enable = m_dummyPad->GetAttribute() != PAD_HOLE_NOT_PLATED;
m_PadNumCtrl->Enable( enable );
m_PadNetNameCtrl->Enable( enable );
m_LengthPadToDieCtrl->Enable( enable );
if( m_dummyPad->GetDrillShape() != PAD_OVAL )
m_DrillShapeCtrl->SetSelection( 0 );
else
m_DrillShapeCtrl->SetSelection( 1 );
// Update some dialog widgets state (Enable/disable options):
wxCommandEvent cmd_event;
setPadLayersList( m_dummyPad->GetLayerMask() );
OnDrillShapeSelected( cmd_event );
OnPadShapeSelection( cmd_event );
}
// Creation of the panel properties of the module editor.
void DIALOG_MODULE_BOARD_EDITOR::InitBoardProperties()
{
PutValueInLocalUnits( *m_ModPositionX, m_CurrentModule->GetPosition().x );
m_XPosUnit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
PutValueInLocalUnits( *m_ModPositionY, m_CurrentModule->GetPosition().y );
m_YPosUnit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_LayerCtrl->SetSelection(
(m_CurrentModule->GetLayer() == LAYER_N_BACK) ? 1 : 0 );
bool select = false;
switch( int( m_CurrentModule->GetOrientation() ) )
{
case 0:
m_OrientCtrl->SetSelection( 0 );
break;
case 900:
case -2700:
m_OrientCtrl->SetSelection( 1 );
break;
case -900:
case 2700:
m_OrientCtrl->SetSelection( 2 );
break;
case -1800:
case 1800:
m_OrientCtrl->SetSelection( 3 );
break;
default:
m_OrientCtrl->SetSelection( 4 );
select = true;
break;
}
wxString msg;
msg << m_CurrentModule->GetOrientation();
m_OrientValue->SetValue( msg );
m_OrientValue->Enable( select );
// Initialize dialog relative to masks clearances
m_NetClearanceUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderMaskMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderPasteMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_CurrentModule->GetLocalClearance() );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_CurrentModule->GetLocalSolderMaskMargin() );
// These 2 parameters are usually < 0, so prepare entering a negative
// value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_CurrentModule->GetLocalSolderPasteMargin() );
if( m_CurrentModule->GetLocalSolderPasteMargin() == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) +
m_SolderPasteMarginCtrl->GetValue() );
// Add solder paste margin ration in per cent
// for the usual default value 0.0, display -0.0 (or -0,0 in some countries)
msg.Printf( wxT( "%f" ),
m_CurrentModule->GetLocalSolderPasteMarginRatio() * 100.0 );
if( m_CurrentModule->GetLocalSolderPasteMarginRatio() == 0.0 &&
msg[0] == '0') // Sometimes Printf adds a sign if the value is very small (0.0)
m_SolderPasteMarginRatioCtrl->SetValue( wxT("-") + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
switch( m_CurrentModule->GetZoneConnection() )
{
default:
case UNDEFINED_CONNECTION:
m_ZoneConnectionChoice->SetSelection( 0 );
break;
case PAD_IN_ZONE:
m_ZoneConnectionChoice->SetSelection( 1 );
break;
case THERMAL_PAD:
m_ZoneConnectionChoice->SetSelection( 2 );
break;
case PAD_NOT_IN_ZONE:
m_ZoneConnectionChoice->SetSelection( 3 );
break;
}
}
void DIALOG_MODULE_MODULE_EDITOR::initModeditProperties()
{
SetFocus();
// Display the default path, given by environment variable KISYS3DMOD
wxString default_path;
wxGetEnv( wxT( KISYS3DMOD ), &default_path );
#ifdef __WINDOWS__
default_path.Replace( wxT( "/" ), wxT( "\\" ) );
#endif
m_textCtrl3DDefaultPath->SetValue( default_path );
m_lastSelected3DShapeIndex = -1;
// Init 3D shape list
S3D_MASTER* draw3D = m_currentModule->Models();
while( draw3D )
{
if( !draw3D->GetShape3DName().IsEmpty() )
{
S3D_MASTER* draw3DCopy = new S3D_MASTER(NULL);
draw3DCopy->Copy( draw3D );
m_shapes3D_list.push_back( draw3DCopy );
m_3D_ShapeNameListBox->Append( draw3DCopy->GetShape3DName() );
}
draw3D = (S3D_MASTER*) draw3D->Next();
}
m_DocCtrl->SetValue( m_currentModule->GetDescription() );
m_KeywordCtrl->SetValue( m_currentModule->GetKeywords() );
m_referenceCopy = new TEXTE_MODULE( NULL );
m_valueCopy = new TEXTE_MODULE( NULL );
m_referenceCopy->Copy( &m_currentModule->Reference() );
m_valueCopy->Copy( &m_currentModule->Value() );
m_ReferenceCtrl->SetValue( m_referenceCopy->GetText() );
m_ValueCtrl->SetValue( m_valueCopy->GetText() );
m_ValueCtrl->SetValue( m_valueCopy->GetText() );
m_FootprintNameCtrl->SetValue( m_currentModule->GetFPID().Format() );
m_AttributsCtrl->SetItemToolTip( 0, _( "Use this attribute for most non SMD components" ) );
m_AttributsCtrl->SetItemToolTip( 1,
_( "Use this attribute for SMD components.\nOnly components with this option are put in the footprint position list file" ) );
m_AttributsCtrl->SetItemToolTip( 2,
_( "Use this attribute for \"virtual\" components drawn on board (like a old ISA PC bus connector)" ) );
// Controls on right side of the dialog
switch( m_currentModule->GetAttributes() & 255 )
{
case 0:
m_AttributsCtrl->SetSelection( 0 );
break;
case MOD_CMS:
m_AttributsCtrl->SetSelection( 1 );
break;
case MOD_VIRTUAL:
m_AttributsCtrl->SetSelection( 2 );
break;
default:
m_AttributsCtrl->SetSelection( 0 );
break;
}
m_AutoPlaceCtrl->SetSelection( (m_currentModule->IsLocked()) ? 1 : 0 );
m_AutoPlaceCtrl->SetItemToolTip( 0, _( "Enable hotkey move commands and Auto Placement" ) );
m_AutoPlaceCtrl->SetItemToolTip( 1, _( "Disable hotkey move commands and Auto Placement" ) );
m_CostRot90Ctrl->SetValue( m_currentModule->GetPlacementCost90() );
m_CostRot180Ctrl->SetValue( m_currentModule->GetPlacementCost180() );
// Initialize 3D parameters
m_3D_Scale = new VERTEX_VALUE_CTRL( m_Panel3D, m_bSizerShapeScale );
m_3D_Offset = new VERTEX_VALUE_CTRL( m_Panel3D, m_bSizerShapeOffset );
m_3D_Rotation = new VERTEX_VALUE_CTRL( m_Panel3D, m_bSizerShapeRotation );
// Initialize dialog relative to masks clearances
m_NetClearanceUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderMaskMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderPasteMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
wxString msg;
PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_currentModule->GetLocalClearance() );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_currentModule->GetLocalSolderMaskMargin() );
// These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_currentModule->GetLocalSolderPasteMargin() );
if( m_currentModule->GetLocalSolderPasteMargin() == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) + m_SolderPasteMarginCtrl->GetValue() );
if( m_currentModule->GetLocalSolderPasteMarginRatio() == 0.0 )
msg.Printf( wxT( "-%f" ), m_currentModule->GetLocalSolderPasteMarginRatio() * 100.0 );
else
msg.Printf( wxT( "%f" ), m_currentModule->GetLocalSolderPasteMarginRatio() * 100.0 );
m_SolderPasteMarginRatioCtrl->SetValue( msg );
// Add solder paste margin ration in per cent
// for the usual default value 0.0, display -0.0 (or -0,0 in some countries)
msg.Printf( wxT( "%f" ), m_currentModule->GetLocalSolderPasteMarginRatio() * 100.0 );
if( m_currentModule->GetLocalSolderPasteMarginRatio() == 0.0 &&
msg[0] == '0') // Sometimes Printf adds a sign if the value is very small (0.0)
m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
// if m_3D_ShapeNameListBox is not empty, preselect first 3D shape
if( m_3D_ShapeNameListBox->GetCount() > 0 )
{
m_lastSelected3DShapeIndex = 0;
m_3D_ShapeNameListBox->SetSelection( m_lastSelected3DShapeIndex );
Transfert3DValuesToDisplay( m_shapes3D_list[m_lastSelected3DShapeIndex] );
}
// We have modified the UI, so call Fit() for m_Panel3D
// to be sure the m_Panel3D sizers are initialized before opening the dialog
m_Panel3D->GetSizer()->Fit( m_Panel3D );
}
bool DialogEditModuleText::TransferDataToWindow()
{
if( !wxDialog::TransferDataToWindow() )
return false;
wxString msg;
if( m_module )
{
wxString format = m_ModuleInfoText->GetLabel();
msg.Printf( format,
GetChars( m_module->GetReference() ),
GetChars( m_module->GetValue() ),
m_module->GetOrientation() / 10.0 );
}
else
{
msg.Empty();
}
m_ModuleInfoText->SetLabel( msg );
// Create a list of not allowed layers.
// could be slightly dependent of the type of footprint text.
LSET forbiddenLayers( LSET::AllCuMask() );
forbiddenLayers.set( Edge_Cuts ).set( Margin ).set( F_Paste ).set( B_Paste ).set( F_Mask ).set( B_Mask );
switch( m_currentText->GetType() )
{
case TEXTE_MODULE::TEXT_is_VALUE:
m_TextDataTitle->SetLabel( _( "Value:" ) );
break;
case TEXTE_MODULE::TEXT_is_DIVERS:
m_TextDataTitle->SetLabel( _( "Text:" ) );
break;
case TEXTE_MODULE::TEXT_is_REFERENCE:
m_TextDataTitle->SetLabel( _( "Reference:" ) );
break;
}
m_Name->SetValue( m_currentText->GetText() );
m_Style->SetSelection( m_currentText->IsItalic() ? 1 : 0 );
AddUnitSymbol( *m_SizeXTitle );
PutValueInLocalUnits( *m_TxtSizeCtrlX, m_currentText->GetSize().x );
AddUnitSymbol( *m_SizeYTitle );
PutValueInLocalUnits( *m_TxtSizeCtrlY, m_currentText->GetSize().y );
AddUnitSymbol( *m_PosXTitle );
PutValueInLocalUnits( *m_TxtPosCtrlX, m_currentText->GetPos0().x );
AddUnitSymbol( *m_PosYTitle );
PutValueInLocalUnits( *m_TxtPosCtrlY, m_currentText->GetPos0().y );
AddUnitSymbol( *m_WidthTitle );
PutValueInLocalUnits( *m_TxtWidthCtlr, m_currentText->GetThickness() );
double text_orient = m_currentText->GetOrientation();
NORMALIZE_ANGLE_90( text_orient );
if( (text_orient != 0) )
m_Orient->SetSelection( 1 );
if( !m_currentText->IsVisible() )
m_Show->SetSelection( 1 );
bool custom_orientation = false;
switch( int( text_orient ) )
{
case 0:
m_Orient->SetSelection( 0 );
break;
case 900:
m_Orient->SetSelection( 1 );
break;
case -900:
m_Orient->SetSelection( 2 );
break;
default:
m_Orient->SetSelection( 3 );
custom_orientation = true;
break;
}
m_OrientValueCtrl->Enable( custom_orientation );
m_OrientValue = text_orient / 10.0;
m_OrientValidator.TransferToWindow();
// Configure the layers list selector
if( !m_parent->GetBoard()->IsLayerEnabled( m_currentText->GetLayer() ) )
// Footprints are built outside the current board, so items cann be
// on a not activated layer, therefore show it if happens.
m_LayerSelectionCtrl->ShowNonActivatedLayers( true );
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerSet( forbiddenLayers );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_currentText->GetLayer() ) < 0 )
{
wxMessageBox( _( "This item has an illegal layer id.\n"
"Now, forced on the front silk screen layer. Please, fix it" ) );
m_LayerSelectionCtrl->SetLayerSelection( F_SilkS );
}
return true;
}
void DIALOG_MODEDIT_FP_BODY_ITEM_PROPERTIES::initDlg()
/* Initialize messages and values in text control,
* according to the item parameters values
*/
{
SetFocus();
m_StandardButtonsSizerOK->SetDefault();
// Set unit symbol
wxStaticText * texts_unit[] =
{
m_StartPointXUnit,
m_StartPointYUnit,
m_EndPointXUnit,
m_EndPointYUnit,
m_ThicknessTextUnit,
m_DefaulThicknessTextUnit,
NULL
};
for( int ii = 0; ; ii++ )
{
if( texts_unit[ii] == NULL )
break;
texts_unit[ii]->SetLabel( GetAbbreviatedUnitsLabel() );
}
wxString msg;
// Change texts according to the segment shape:
switch ( m_item->GetShape() )
{
case S_CIRCLE:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Point X"));
m_EndPointYLabel->SetLabel(_("Point Y"));
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
case S_ARC:
m_StartPointXLabel->SetLabel(_("Center X"));
m_StartPointYLabel->SetLabel(_("Center Y"));
m_EndPointXLabel->SetLabel(_("Start Point X"));
m_EndPointYLabel->SetLabel(_("Start Point Y"));
// Here the angle is a double, but the UI is still working
// with integers
msg << int( m_item->GetAngle() );
m_Angle_Ctrl->SetValue(msg);
break;
default:
m_Angle_Text->Show(false);
m_Angle_Ctrl->Show(false);
m_AngleUnit->Show(false);
break;
}
PutValueInLocalUnits( *m_Center_StartXCtrl, m_item->GetStart().x );
PutValueInLocalUnits( *m_Center_StartYCtrl, m_item->GetStart().y );
PutValueInLocalUnits( *m_EndX_Radius_Ctrl, m_item->GetEnd().x );
PutValueInLocalUnits( *m_EndY_Ctrl, m_item->GetEnd().y );
PutValueInLocalUnits( *m_ThicknessCtrl, m_item->GetWidth() );
PutValueInLocalUnits( *m_DefaultThicknessCtrl, m_brdSettings.m_ModuleSegmentWidth );
// Configure the layers list selector
m_LayerSelectionCtrl->SetLayersHotkeys( false );
m_LayerSelectionCtrl->SetLayerMask( INTERNAL_CU_LAYERS|EDGE_LAYER );
m_LayerSelectionCtrl->SetBoardFrame( m_parent );
m_LayerSelectionCtrl->Resync();
if( m_LayerSelectionCtrl->SetLayerSelection( m_item->GetLayer() ) < 0 )
{
wxMessageBox( _("This item has an illegal layer id.\n"
"Now, forced on the front silk screen layer. Please, fix it") );
m_LayerSelectionCtrl->SetLayerSelection( SILKSCREEN_N_FRONT );
}
}
void DIALOG_SET_GRID::setGridOrigin( const wxPoint& grid )
{
PutValueInLocalUnits( *m_GridOriginXCtrl, grid.x );
PutValueInLocalUnits( *m_GridOriginYCtrl, grid.y );
}
void DIALOG_COPPER_ZONE::initDialog()
{
BOARD* board = m_Parent->GetBoard();
wxString msg;
if( m_settings.m_Zone_45_Only )
m_OrientEdgesOpt->SetSelection( 1 );
m_FillModeCtrl->SetSelection( m_settings.m_FillMode ? 1 : 0 );
AddUnitSymbol( *m_ClearanceValueTitle, g_UserUnit );
msg = ReturnStringFromValue( g_UserUnit, m_settings.m_ZoneClearance );
m_ZoneClearanceCtrl->SetValue( msg );
AddUnitSymbol( *m_MinThicknessValueTitle, g_UserUnit );
msg = ReturnStringFromValue( g_UserUnit, m_settings.m_ZoneMinThickness );
m_ZoneMinThicknessCtrl->SetValue( msg );
switch( m_settings.GetPadConnection() )
{
case THT_THERMAL: // Thermals only for THT pads
m_PadInZoneOpt->SetSelection( 2 );
break;
case PAD_NOT_IN_ZONE: // Pads are not covered
m_PadInZoneOpt->SetSelection( 3 );
break;
default:
case THERMAL_PAD: // Use thermal relief for pads
m_PadInZoneOpt->SetSelection( 1 );
break;
case PAD_IN_ZONE: // pads are covered by copper
m_PadInZoneOpt->SetSelection( 0 );
break;
}
// Antipad and spokes are significant only for thermals
if( m_settings.GetPadConnection() != THERMAL_PAD &&
m_settings.GetPadConnection() != THT_THERMAL )
{
m_AntipadSizeValue->Enable( false );
m_CopperWidthValue->Enable( false );
}
else
{
m_AntipadSizeValue->Enable( true );
m_CopperWidthValue->Enable( true );
}
m_PriorityLevelCtrl->SetValue( m_settings.m_ZonePriority );
AddUnitSymbol( *m_AntipadSizeText, g_UserUnit );
AddUnitSymbol( *m_CopperBridgeWidthText, g_UserUnit );
PutValueInLocalUnits( *m_AntipadSizeValue, m_settings.m_ThermalReliefGap );
PutValueInLocalUnits( *m_CopperWidthValue, m_settings.m_ThermalReliefCopperBridge );
m_cornerSmoothingChoice->SetSelection( m_settings.GetCornerSmoothingType() );
PutValueInLocalUnits( *m_cornerSmoothingCtrl, m_settings.GetCornerRadius() );
switch( m_settings.m_Zone_HatchingStyle )
{
case CPolyLine::NO_HATCH:
m_OutlineAppearanceCtrl->SetSelection( 0 );
break;
case CPolyLine::DIAGONAL_EDGE:
m_OutlineAppearanceCtrl->SetSelection( 1 );
break;
case CPolyLine::DIAGONAL_FULL:
m_OutlineAppearanceCtrl->SetSelection( 2 );
break;
}
m_ArcApproximationOpt->SetSelection(
m_settings.m_ArcToSegmentsCount == ARC_APPROX_SEGMENTS_COUNT_HIGHT_DEF ? 1 : 0 );
// Create one column in m_LayerSelectionCtrl
wxListItem column0;
column0.SetId( 0 );
m_LayerSelectionCtrl->InsertColumn( 0, column0 );
// Build copper layer list and append to layer widget
int layerCount = board->GetCopperLayerCount();
wxImageList* imageList = new wxImageList( LAYER_BITMAP_SIZE_X, LAYER_BITMAP_SIZE_Y );
m_LayerSelectionCtrl->AssignImageList( imageList, wxIMAGE_LIST_SMALL );
int ctrlWidth = 0; // Min width for m_LayerSelectionCtrl to show the layers names
for( LAYER_NUM ii = FIRST_LAYER; ii < layerCount; ++ii )
{
LAYER_NUM layerNumber = LAYER_N_BACK;
if( layerCount <= 1 || ii < layerCount - 1 )
layerNumber = ii;
else if( ii == layerCount - 1 )
layerNumber = LAYER_N_FRONT;
m_LayerId.insert( m_LayerId.begin(), layerNumber );
msg = board->GetLayerName( layerNumber ).Trim();
EDA_COLOR_T layerColor = board->GetLayerColor( layerNumber );
imageList->Add( makeLayerBitmap( layerColor ) );
int itemIndex = m_LayerSelectionCtrl->InsertItem( 0, msg, ii );
if( m_settings.m_CurrentZone_Layer == layerNumber )
m_LayerSelectionCtrl->Select( itemIndex );
wxSize tsize( GetTextSize( msg, m_LayerSelectionCtrl ) );
ctrlWidth = std::max( ctrlWidth, tsize.x );
}
// The most easy way to ensure the right size is to use wxLIST_AUTOSIZE
// unfortunately this option does not work well both on
// wxWidgets 2.8 ( column witdth too small), and
// wxWidgets 2.9 ( column witdth too large)
ctrlWidth += LAYER_BITMAP_SIZE_X + 16; // Add bitmap width + margin between bitmap and text
m_LayerSelectionCtrl->SetColumnWidth( 0, ctrlWidth );
ctrlWidth += 4; // add small margin between text and window borders
m_LayerSelectionCtrl->SetMinSize( wxSize(ctrlWidth, -1));
wxString netNameDoNotShowFilter = wxT( "Net-*" );
if( m_Config )
{
int opt = m_Config->Read( ZONE_NET_SORT_OPTION_KEY, 1l );
m_NetDisplayOption->SetSelection( opt );
m_Config->Read( ZONE_NET_FILTER_STRING_KEY, netNameDoNotShowFilter );
}
else
m_NetDisplayOption->SetSelection( 1 );
m_ShowNetNameFilter->SetValue( m_netNameShowFilter );
initListNetsParams();
// Build list of nets:
m_DoNotShowNetNameFilter->SetValue( netNameDoNotShowFilter );
buildAvailableListOfNets();
wxCommandEvent event;
OnCornerSmoothingModeChoice( event );
}
void DialogEditModuleText::initDlg( )
{
SetFocus();
wxString msg;
if( m_module )
{
wxString format = m_ModuleInfoText->GetLabel();
msg.Printf( format,
GetChars( m_module->GetReference() ),
GetChars( m_module->GetValue() ),
m_module->GetOrientation() / 10.0 );
}
else
{
msg.Empty();
}
m_ModuleInfoText->SetLabel( msg );
switch( m_currentText->GetType() )
{
case TEXTE_MODULE::TEXT_is_VALUE:
m_TextDataTitle->SetLabel( _( "Value:" ) );
break;
case TEXTE_MODULE::TEXT_is_DIVERS:
m_TextDataTitle->SetLabel( _( "Text:" ) );
break;
default:
m_TextDataTitle->SetLabel( _( "Reference:" ) );
break;
}
m_Name->SetValue( m_currentText->GetText() );
m_Style->SetSelection( m_currentText->IsItalic() ? 1 : 0 );
AddUnitSymbol( *m_SizeXTitle );
PutValueInLocalUnits( *m_TxtSizeCtrlX, m_currentText->GetSize().x );
AddUnitSymbol( *m_SizeYTitle );
PutValueInLocalUnits( *m_TxtSizeCtrlY, m_currentText->GetSize().y );
AddUnitSymbol( *m_PosXTitle );
PutValueInLocalUnits( *m_TxtPosCtrlX, m_currentText->GetPos0().x );
AddUnitSymbol( *m_PosYTitle );
PutValueInLocalUnits( *m_TxtPosCtrlY, m_currentText->GetPos0().y );
AddUnitSymbol( *m_WidthTitle );
PutValueInLocalUnits( *m_TxtWidthCtlr, m_currentText->GetThickness() );
double text_orient = m_currentText->GetOrientation();
NORMALIZE_ANGLE_90( text_orient );
if( (text_orient != 0) )
m_Orient->SetSelection( 1 );
if( !m_currentText->IsVisible() )
m_Show->SetSelection( 1 );;
}
