Beispiel #1
0
/**
\brief Test case: TC_CoreSimd_SatAddSub
\details
- Check Saturating addition and subtraction:
  __QADD
  __QSUB
*/
void TC_CoreSimd_SatAddSub (void) {
#if ((defined (__ARM_ARCH_7EM__ ) && (__ARM_ARCH_7EM__  == 1)) || \
     (defined (__ARM_FEATURE_DSP) && (__ARM_FEATURE_DSP == 1))     )
  volatile int32_t op1_s32, op2_s32;
  volatile int32_t res_s32;

  /* --- __QADD Test ---------------------------------------------- */
  op1_s32 = (int32_t)0x80000003;
  op2_s32 = (int32_t)0x00000004;
  res_s32 = __QADD(op1_s32, op2_s32);
  ASSERT_TRUE(res_s32 == (int32_t)0x80000007);

  op1_s32 = (int32_t)0x80000000;
  op2_s32 = (int32_t)0x80000002;
  res_s32 = __QADD(op1_s32, op2_s32);
  ASSERT_TRUE(res_s32 == (int32_t)0x80000000);

  /* --- __QSUB Test ---------------------------------------------- */
  op1_s32 = (int32_t)0x80000003;
  op2_s32 = (int32_t)0x00000004;
  res_s32 = __QSUB(op1_s32, op2_s32);
  ASSERT_TRUE(res_s32 == (int32_t)0x80000000);

  op1_s32 = (int32_t)0x80000003;
  op2_s32 = (int32_t)0x00000002;
  res_s32 = __QSUB(op1_s32, op2_s32);
  ASSERT_TRUE(res_s32 == (int32_t)0x80000001);
#endif
}
void arm_pid_init_q31(
    arm_pid_instance_q31 * S,
    int32_t resetStateFlag)
{

#ifndef ARM_MATH_CM0_FAMILY

    /* Run the below code for Cortex-M4 and Cortex-M3 */

    /* Derived coefficient A0 */
    S->A0 = __QADD(__QADD(S->Kp, S->Ki), S->Kd);

    /* Derived coefficient A1 */
    S->A1 = -__QADD(__QADD(S->Kd, S->Kd), S->Kp);


#else

    /* Run the below code for Cortex-M0 */

    q31_t temp;

    /* Derived coefficient A0 */
    temp = clip_q63_to_q31((q63_t) S->Kp + S->Ki);
    S->A0 = clip_q63_to_q31((q63_t) temp + S->Kd);

    /* Derived coefficient A1 */
    temp = clip_q63_to_q31((q63_t) S->Kd + S->Kd);
    S->A1 = -clip_q63_to_q31((q63_t) temp + S->Kp);

#endif /* #ifndef ARM_MATH_CM0_FAMILY */

    /* Derived coefficient A2 */
    S->A2 = S->Kd;

    /* Check whether state needs reset or not */
    if(resetStateFlag)
    {
        /* Clear the state buffer.  The size will be always 3 samples */
        memset(S->state, 0, 3u * sizeof(q31_t));
    }

}
Beispiel #3
0
void arm_add_q31( 
  q31_t * pSrcA, 
  q31_t * pSrcB, 
  q31_t * pDst, 
  uint32_t blockSize) 
{ 
  uint32_t blkCnt;                               /* loop counter */ 
 
 
  /*loop Unrolling */ 
  blkCnt = blockSize >> 2u; 
 
  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.  
   ** a second loop below computes the remaining 1 to 3 samples. */ 
  while(blkCnt > 0u) 
  { 
    /* C = A + B */ 
    /* Add and then store the results in the destination buffer. */ 
    *pDst++ = __QADD(*pSrcA++, *pSrcB++); 
    *pDst++ = __QADD(*pSrcA++, *pSrcB++); 
    *pDst++ = __QADD(*pSrcA++, *pSrcB++); 
    *pDst++ = __QADD(*pSrcA++, *pSrcB++); 
 
    /* Decrement the loop counter */ 
    blkCnt--; 
  } 
 
  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.  
   ** No loop unrolling is used. */ 
  blkCnt = blockSize % 0x4u; 
 
  while(blkCnt > 0u) 
  { 
    /* C = A + B */ 
    /* Add and then store the results in the destination buffer. */ 
    *pDst++ = __QADD(*pSrcA++, *pSrcB++); 
 
    /* Decrement the loop counter */ 
    blkCnt--; 
  } 
} 
Beispiel #4
0
void arm_pid_init_q31(
    arm_pid_instance_q31 * S,
    int32_t resetStateFlag)
{
    /* Derived coefficient A0 */
    S->A0 = __QADD(__QADD(S->Kp, S->Ki), S->Kd);

    /* Derived coefficient A1 */
    S->A1 = -__QADD(__QADD(S->Kd, S->Kd), S->Kp);

    /* Derived coefficient A2 */
    S->A2 = S->Kd;

    /* Check whether state needs reset or not */
    if(resetStateFlag)
    {
        /* Clear the state buffer.  The size will be always 3 samples */
        memset(S->state, 0, 3u * sizeof(q31_t));
    }

}
void arm_pid_init_q31(
  arm_pid_instance_q31 * S,
  int32_t resetStateFlag)
{

#if defined (ARM_MATH_DSP)

  /* Derived coefficient A0 */
  S->A0 = __QADD(__QADD(S->Kp, S->Ki), S->Kd);

  /* Derived coefficient A1 */
  S->A1 = -__QADD(__QADD(S->Kd, S->Kd), S->Kp);

#else

  q31_t temp;                                    /* to store the sum */

  /* Derived coefficient A0 */
  temp = clip_q63_to_q31((q63_t) S->Kp + S->Ki);
  S->A0 = clip_q63_to_q31((q63_t) temp + S->Kd);

  /* Derived coefficient A1 */
  temp = clip_q63_to_q31((q63_t) S->Kd + S->Kd);
  S->A1 = -clip_q63_to_q31((q63_t) temp + S->Kp);

#endif /* #if defined (ARM_MATH_DSP) */

  /* Derived coefficient A2 */
  S->A2 = S->Kd;

  /* Check whether state needs reset or not */
  if (resetStateFlag)
  {
    /* Reset state to zero, The size will be always 3 samples */
    memset(S->state, 0, 3U * sizeof(q31_t));
  }

}
Beispiel #6
0
arm_status arm_mat_add_q31(
  const arm_matrix_instance_q31 * pSrcA,
  const arm_matrix_instance_q31 * pSrcB,
  arm_matrix_instance_q31 * pDst)
{
  q31_t *pIn1 = pSrcA->pData;                    /* input data matrix pointer A */
  q31_t *pIn2 = pSrcB->pData;                    /* input data matrix pointer B */
  q31_t *pOut = pDst->pData;                     /* output data matrix pointer */
  q31_t inA1, inB1;                              /* temporary variables */

#ifndef ARM_MATH_CM0_FAMILY

  q31_t inA2, inB2;                              /* temporary variables */
  q31_t out1, out2;                              /* temporary variables */

#endif //      #ifndef ARM_MATH_CM0_FAMILY

  uint32_t numSamples;                           /* total number of elements in the matrix  */
  uint32_t blkCnt;                               /* loop counters */
  arm_status status;                             /* status of matrix addition */

#ifdef ARM_MATH_MATRIX_CHECK
  /* Check for matrix mismatch condition */
  if((pSrcA->numRows != pSrcB->numRows) ||
     (pSrcA->numCols != pSrcB->numCols) ||
     (pSrcA->numRows != pDst->numRows) || (pSrcA->numCols != pDst->numCols))
  {
    /* Set status as ARM_MATH_SIZE_MISMATCH */
    status = ARM_MATH_SIZE_MISMATCH;
  }
  else
#endif
  {
    /* Total number of samples in the input matrix */
    numSamples = (uint32_t) pSrcA->numRows * pSrcA->numCols;

#ifndef ARM_MATH_CM0_FAMILY

    /* Run the below code for Cortex-M4 and Cortex-M3 */

    /* Loop Unrolling */
    blkCnt = numSamples >> 2u;


    /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.    
     ** a second loop below computes the remaining 1 to 3 samples. */
    while(blkCnt > 0u)
    {
      /* C(m,n) = A(m,n) + B(m,n) */
      /* Add, saturate and then store the results in the destination buffer. */
      /* Read values from source A */
      inA1 = pIn1[0];

      /* Read values from source B */
      inB1 = pIn2[0];

      /* Read values from source A */
      inA2 = pIn1[1];

      /* Add and saturate */
      out1 = __QADD(inA1, inB1);

      /* Read values from source B */
      inB2 = pIn2[1];

      /* Read values from source A */
      inA1 = pIn1[2];

      /* Add and saturate */
      out2 = __QADD(inA2, inB2);

      /* Read values from source B */
      inB1 = pIn2[2];

      /* Store result in destination */
      pOut[0] = out1;
      pOut[1] = out2;

      /* Read values from source A */
      inA2 = pIn1[3];

      /* Read values from source B */
      inB2 = pIn2[3];

      /* Add and saturate */
      out1 = __QADD(inA1, inB1);
      out2 = __QADD(inA2, inB2);

      /* Store result in destination */
      pOut[2] = out1;
      pOut[3] = out2;

      /* update pointers to process next sampels */
      pIn1 += 4u;
      pIn2 += 4u;
      pOut += 4u;

      /* Decrement the loop counter */
      blkCnt--;
    }

    /* If the numSamples is not a multiple of 4, compute any remaining output samples here.      
     ** No loop unrolling is used. */
    blkCnt = numSamples % 0x4u;

#else

    /* Run the below code for Cortex-M0 */

    /* Initialize blkCnt with number of samples */
    blkCnt = numSamples;


#endif /* #ifndef ARM_MATH_CM0_FAMILY */

    while(blkCnt > 0u)
    {
      /* C(m,n) = A(m,n) + B(m,n) */
      /* Add, saturate and then store the results in the destination buffer. */
      inA1 = *pIn1++;
      inB1 = *pIn2++;

      inA1 = __QADD(inA1, inB1);

      /* Decrement the loop counter */
      blkCnt--;

      *pOut++ = inA1;

    }

    /* set status as ARM_MATH_SUCCESS */
    status = ARM_MATH_SUCCESS;
  }

  /* Return to application */
  return (status);
}
void arm_add_q31(
  q31_t * pSrcA,
  q31_t * pSrcB,
  q31_t * pDst,
  uint32_t blockSize)
{
  uint32_t blkCnt;                               /* loop counter */

#ifndef ARM_MATH_CM0

/* Run the below code for Cortex-M4 and Cortex-M3 */
  q31_t inA1, inA2, inA3, inA4;
  q31_t inB1, inB2, inB3, inB4;

  /*loop Unrolling */
  blkCnt = blockSize >> 2u;

  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.    
   ** a second loop below computes the remaining 1 to 3 samples. */
  while(blkCnt > 0u)
  {
    /* C = A + B */
    /* Add and then store the results in the destination buffer. */
    inA1 = *pSrcA++;
    inA2 = *pSrcA++;
    inB1 = *pSrcB++;
    inB2 = *pSrcB++;

    inA3 = *pSrcA++;
    inA4 = *pSrcA++;
    inB3 = *pSrcB++;
    inB4 = *pSrcB++;

    *pDst++ = __QADD(inA1, inB1);
    *pDst++ = __QADD(inA2, inB2);
    *pDst++ = __QADD(inA3, inB3);
    *pDst++ = __QADD(inA4, inB4);

    /* Decrement the loop counter */
    blkCnt--;
  }

  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.    
   ** No loop unrolling is used. */
  blkCnt = blockSize % 0x4u;

  while(blkCnt > 0u)
  {
    /* C = A + B */
    /* Add and then store the results in the destination buffer. */
    *pDst++ = __QADD(*pSrcA++, *pSrcB++);

    /* Decrement the loop counter */
    blkCnt--;
  }

#else

  /* Run the below code for Cortex-M0 */



  /* Initialize blkCnt with number of samples */
  blkCnt = blockSize;

  while(blkCnt > 0u)
  {
    /* C = A + B */
    /* Add and then store the results in the destination buffer. */
    *pDst++ = (q31_t) clip_q63_to_q31((q63_t) * pSrcA++ + *pSrcB++);

    /* Decrement the loop counter */
    blkCnt--;
  }

#endif /* #ifndef ARM_MATH_CM0 */

}
void arm_offset_q31(
  q31_t * pSrc,
  q31_t offset,
  q31_t * pDst,
  uint32_t blockSize)
{
  uint32_t blkCnt;                               /* loop counter */

#ifndef ARM_MATH_CM0_FAMILY

/* Run the below code for Cortex-M4 and Cortex-M3 */
  q31_t in1, in2, in3, in4;


  /*loop Unrolling */
  blkCnt = blockSize >> 2u;

  /* First part of the processing with loop unrolling.  Compute 4 outputs at a time.    
   ** a second loop below computes the remaining 1 to 3 samples. */
  while(blkCnt > 0u)
  {
    /* C = A + offset */
    /* Add offset and then store the results in the destination buffer. */
    in1 = *pSrc++;
    in2 = *pSrc++;
    in3 = *pSrc++;
    in4 = *pSrc++;

    *pDst++ = __QADD(in1, offset);
    *pDst++ = __QADD(in2, offset);
    *pDst++ = __QADD(in3, offset);
    *pDst++ = __QADD(in4, offset);

    /* Decrement the loop counter */
    blkCnt--;
  }

  /* If the blockSize is not a multiple of 4, compute any remaining output samples here.    
   ** No loop unrolling is used. */
  blkCnt = blockSize % 0x4u;

  while(blkCnt > 0u)
  {
    /* C = A + offset */
    /* Add offset and then store the result in the destination buffer. */
    *pDst++ = __QADD(*pSrc++, offset);

    /* Decrement the loop counter */
    blkCnt--;
  }

#else

  /* Run the below code for Cortex-M0 */

  /* Initialize blkCnt with number of samples */
  blkCnt = blockSize;

  while(blkCnt > 0u)
  {
    /* C = A + offset */
    /* Add offset and then store the result in the destination buffer. */
    *pDst++ = (q31_t) clip_q63_to_q31((q63_t) * pSrc++ + offset);

    /* Decrement the loop counter */
    blkCnt--;
  }

#endif /* #ifndef ARM_MATH_CM0_FAMILY */

}
Beispiel #9
0
void arm_add_q31(     
  q31_t * pSrcA,     
  q31_t * pSrcB,     
  q31_t * pDst,     
  uint32_t blockSize)     
{     
  uint32_t blkCnt;                               /* loop counter */     
  q31_t inA1, inA2, inA3, inA4;	  				 /* temporary input variables */  
  q31_t inB1, inB2, inB3, inB4;					 /* temporary input variables */  
     
  /*loop Unrolling */     
  blkCnt = blockSize >> 3u;     
     
  /* First part of the processing with loop unrolling.  Compute 8 outputs at a time.      
   ** a second loop below computes the remaining 1 to 7 samples. */     
  while(blkCnt > 0u)     
  {     
    /* C = A + B */     
    /* Add and then store the results in the destination buffer. */     
	/* read input from soruceA */  
	inA1 = *pSrcA;  
	/* read input from soruceB */  
	inB1 = *pSrcB;  
	/* read input from soruceA */  
	inA2 = *(pSrcA + 1);  
	/* read input from soruceB */  
	inB2 = *(pSrcB + 1);  
  
	/* add, saturate and store result to destination */  
	*pDst = __QADD(inA1, inB1);  
  
	/* read input from soruceA */  
	inA3 = *(pSrcA + 2);  
	/* read input from soruceB */  
	inB3 = *(pSrcB + 2);  
  
	/* add, saturate and store result to destination */  
	*(pDst + 1) = __QADD(inA2, inB2);  
  
	/* read input from soruceA */  
	inA4 = *(pSrcA + 3);  
	/* read input from soruceB */  
	inB4 = *(pSrcB + 3);  
  
	/* add, saturate and store result to destination */  
	*(pDst + 2) = __QADD(inA3, inB3);  
  
	/* read input from soruceA */  
	inA1 = *(pSrcA + 4);  
	/* read input from soruceB */  
	inB1 = *(pSrcB + 4);  
  
	/* add, saturate and store result to destination */  
	*(pDst + 3) = __QADD(inA4, inB4);  
  
	/* read input from soruceA */  
	inA2 = *(pSrcA + 5);  
	/* read input from soruceB */  
	inB2 = *(pSrcB + 5);  
  
	/* add, saturate and store result to destination */  
	*(pDst + 4) = __QADD(inA1, inB1);  
  
	/* read input from soruceA */  
	inA3 = *(pSrcA + 6);  
	/* read input from soruceB */  
	inB3 = *(pSrcB + 6);  
  
	/* add, saturate and store result to destination */  
	*(pDst + 5) = __QADD(inA2, inB2);  
  
	/* read input from soruceA */  
	inA4 = *(pSrcA + 7);  
  
	/* add, saturate and store result to destination */  
	*(pDst + 6) = __QADD(inA3, inB3);  
  
	/* increment sourceA pointer by 8 */  
	pSrcA += 8u;  
  
	/* read input from soruceB */  
	inB4 = *(pSrcB + 7);  
  
	/* increment sourceB pointer by 8 */  
	pSrcB += 8u;  
  
	/* add, saturate and store result to destination */  
	*(pDst + 7) = __QADD(inA4, inB4);  
  
	/* increment destination pointer by 8 */  
	pDst += 8u;  
  
    /* Decrement the loop counter */     
    blkCnt--;     
  }     
     
  /* If the blockSize is not a multiple of 8, compute any remaining output samples here.      
   ** No loop unrolling is used. */     
  blkCnt = blockSize % 0x8u;     
     
  while(blkCnt > 0u)     
  {     
    /* C = A + B */     
    /* Add and then store the results in the destination buffer. */  
	inA1 = *pSrcA++;  
	inB1 = *pSrcB++;  
	     
    *pDst++ = __QADD(inA1, inB1);     
     
    /* Decrement the loop counter */     
    blkCnt--;     
  }     
}     
Beispiel #10
0
void arm_offset_q31(     
  q31_t * pSrc,     
  q31_t offset,     
  q31_t * pDst,     
  uint32_t blockSize)     
{     
  uint32_t blkCnt;                               /* loop counter */     
  q31_t in1, in2, in3, in4;		 				 /* temporary variables */  
     
     
  /*loop Unrolling */     
  blkCnt = blockSize >> 3u;     
     
  /* First part of the processing with loop unrolling.  Compute 8 outputs at a time.      
   ** a second loop below computes the remaining 1 to 7 samples. */     
  while(blkCnt > 0u)     
  {     
    /* C = A + offset */     
    /* Add offset and then store the results in the destination buffer. */     
	/* read samples from the source */  
	in1 = *pSrc;  
	in2 = *(pSrc + 1);  
  
	/* add offset to the input */  
    in1 = __QADD(in1, offset);     
  
	/* read sample from the source */  
	in3 = *(pSrc + 2);  
  
	/* add offset to the input */  
    in2 = __QADD(in2, offset);     
  
	/* read sample from the source */  
	in4 = *(pSrc + 3);  
  
	/* add offset to the input */  
    in3 = __QADD(in3, offset);     
  
	/* store result to destination buffer */  
  	*pDst = in1;  
  
	/* add offset to the input */  
	in4 = __QADD(in4, offset);   
	    
	/* store result to destination buffer */  
	*(pDst + 1) = in2;  
	*(pDst + 2) = in3;  
	*(pDst + 3) = in4;  
  
	/* read samples from the source */  
	in1 = *(pSrc + 4);  
	in2 = *(pSrc + 5);  
  
	/* add offset to the input */  
    in1 = __QADD(in1, offset);     
  
	/* read sample from the source */  
	in3 = *(pSrc + 6);  
  
	/* add offset to the input */  
    in2 = __QADD(in2, offset);     
	  
	/* read sample from the source */  
	in4 = *(pSrc + 7);  
  
	/* store result to destination buffer */  
	*(pDst + 4) = in1;  
     
	/* add offset to the input */  
    in3 = __QADD(in3, offset);     
  
	/* store result to destination buffer */  
 	*(pDst + 5) = in2;  
  
	/* add offset to the input */  
    in4 = __QADD(in4, offset);     
  
	/* store result to destination buffer */  
	*(pDst + 6) = in3;  
	  
	/* increment source pointer by 8 to process next samples */  
	pSrc += 8u;  
	  
	/* store result to destination buffer */  
	*(pDst + 7) = in4;  
  
	/* increment destination pointer by 8 */  
	pDst += 8u;  
     
    /* Decrement the loop counter */     
    blkCnt--;     
  }     
     
  /* If the blockSize is not a multiple of 8, compute any remaining output samples here.      
   ** No loop unrolling is used. */     
  blkCnt = blockSize % 0x8u;     
     
  while(blkCnt > 0u)     
  {     
    /* C = A + offset */     
    /* Add offset and then store the result in the destination buffer. */     
	in1 = *pSrc++;  
    *pDst++ = __QADD(in1, offset);     
     
    /* Decrement the loop counter */     
    blkCnt--;     
  }     
}     
Beispiel #11
0
#define OP_NAME iadd

#include <ngl_opcode_begin.c>

#ifdef OPCODE_BODY
#ifdef NGL_ARM
{
  ngl_val right = ngl_stack_pop(&stack);
  ngl_val left = ngl_stack_pop(&stack);
  ngl_stack_push(&stack, ngl_val_uint(__QADD(left.uinteger, right.uinteger)));
}
#else
{
  ngl_val right = ngl_stack_pop(&stack);
  ngl_val left = ngl_stack_pop(&stack);
  int64_t sum = (int64_t)(left.integer) + (int64_t)(right.integer);
  if (sum > INT_MAX) {
    sum = INT_MAX;
  }
  if (sum < INT_MIN) {
    sum = INT_MIN;
  }
  ngl_stack_push(&stack, ngl_val_int(sum));
}
#endif
#endif

#include <ngl_opcode_end.c>