int
MPU9250::ioctl(struct file *filp, int cmd, unsigned long arg)
{
switch (cmd) {
case SENSORIOCRESET:
return reset();
case SENSORIOCSPOLLRATE: {
switch (arg) {
/* switching to manual polling */
case SENSOR_POLLRATE_MANUAL:
stop();
_call_interval = 0;
return OK;
/* external signalling not supported */
case SENSOR_POLLRATE_EXTERNAL:
/* zero would be bad */
case 0:
return -EINVAL;
/* set default/max polling rate */
case SENSOR_POLLRATE_MAX:
return ioctl(filp, SENSORIOCSPOLLRATE, 1000);
case SENSOR_POLLRATE_DEFAULT:
return ioctl(filp, SENSORIOCSPOLLRATE, MPU9250_ACCEL_DEFAULT_RATE);
/* adjust to a legal polling interval in Hz */
default: {
/* do we need to start internal polling? */
bool want_start = (_call_interval == 0);
/* convert hz to hrt interval via microseconds */
unsigned ticks = 1000000 / arg;
/* check against maximum sane rate */
if (ticks < 1000) {
return -EINVAL;
}
// adjust filters
float cutoff_freq_hz = _accel_filter_x.get_cutoff_freq();
float sample_rate = 1.0e6f / ticks;
_set_dlpf_filter(cutoff_freq_hz);
_accel_filter_x.set_cutoff_frequency(sample_rate, cutoff_freq_hz);
_accel_filter_y.set_cutoff_frequency(sample_rate, cutoff_freq_hz);
_accel_filter_z.set_cutoff_frequency(sample_rate, cutoff_freq_hz);
float cutoff_freq_hz_gyro = _gyro_filter_x.get_cutoff_freq();
_set_dlpf_filter(cutoff_freq_hz_gyro);
_gyro_filter_x.set_cutoff_frequency(sample_rate, cutoff_freq_hz_gyro);
_gyro_filter_y.set_cutoff_frequency(sample_rate, cutoff_freq_hz_gyro);
_gyro_filter_z.set_cutoff_frequency(sample_rate, cutoff_freq_hz_gyro);
/* update interval for next measurement */
/* XXX this is a bit shady, but no other way to adjust... */
_call_interval = ticks;
/*
set call interval faster than the sample time. We
then detect when we have duplicate samples and reject
them. This prevents aliasing due to a beat between the
stm32 clock and the mpu9250 clock
*/
_call.period = _call_interval - MPU9250_TIMER_REDUCTION;
/* if we need to start the poll state machine, do it */
if (want_start) {
start();
}
return OK;
}
}
}
case SENSORIOCGPOLLRATE:
if (_call_interval == 0) {
return SENSOR_POLLRATE_MANUAL;
}
return 1000000 / _call_interval;
case SENSORIOCSQUEUEDEPTH: {
/* lower bound is mandatory, upper bound is a sanity check */
if ((arg < 1) || (arg > 100)) {
return -EINVAL;
}
irqstate_t flags = px4_enter_critical_section();
if (!_accel_reports->resize(arg)) {
px4_leave_critical_section(flags);
return -ENOMEM;
}
px4_leave_critical_section(flags);
return OK;
}
case SENSORIOCGQUEUEDEPTH:
return _accel_reports->size();
case ACCELIOCGSAMPLERATE:
return _sample_rate;
case ACCELIOCSSAMPLERATE:
_set_sample_rate(arg);
return OK;
case ACCELIOCGLOWPASS:
return _accel_filter_x.get_cutoff_freq();
case ACCELIOCSLOWPASS:
// set software filtering
_accel_filter_x.set_cutoff_frequency(1.0e6f / _call_interval, arg);
_accel_filter_y.set_cutoff_frequency(1.0e6f / _call_interval, arg);
_accel_filter_z.set_cutoff_frequency(1.0e6f / _call_interval, arg);
return OK;
case ACCELIOCSSCALE: {
/* copy scale, but only if off by a few percent */
struct accel_calibration_s *s = (struct accel_calibration_s *) arg;
float sum = s->x_scale + s->y_scale + s->z_scale;
if (sum > 2.0f && sum < 4.0f) {
memcpy(&_accel_scale, s, sizeof(_accel_scale));
return OK;
} else {
return -EINVAL;
}
}
case ACCELIOCGSCALE:
/* copy scale out */
memcpy((struct accel_calibration_s *) arg, &_accel_scale, sizeof(_accel_scale));
return OK;
case ACCELIOCSRANGE:
return set_accel_range(arg);
case ACCELIOCGRANGE:
return (unsigned long)((_accel_range_m_s2) / MPU9250_ONE_G + 0.5f);
case ACCELIOCSELFTEST:
return accel_self_test();
#ifdef ACCELIOCSHWLOWPASS
case ACCELIOCSHWLOWPASS:
_set_dlpf_filter(arg);
return OK;
#endif
#ifdef ACCELIOCGHWLOWPASS
case ACCELIOCGHWLOWPASS:
return _dlpf_freq;
#endif
default:
/* give it to the superclass */
return CDev::ioctl(filp, cmd, arg);
}
}
int
LSM303D::ioctl(struct file *filp, int cmd, unsigned long arg)
{
switch (cmd) {
case SENSORIOCSPOLLRATE: {
switch (arg) {
/* switching to manual polling */
case SENSOR_POLLRATE_MANUAL:
stop();
_call_accel_interval = 0;
return OK;
/* external signalling not supported */
case SENSOR_POLLRATE_EXTERNAL:
/* zero would be bad */
case 0:
return -EINVAL;
/* set default/max polling rate */
case SENSOR_POLLRATE_MAX:
return ioctl(filp, SENSORIOCSPOLLRATE, 1600);
case SENSOR_POLLRATE_DEFAULT:
return ioctl(filp, SENSORIOCSPOLLRATE, LSM303D_ACCEL_DEFAULT_RATE);
/* adjust to a legal polling interval in Hz */
default: {
/* do we need to start internal polling? */
bool want_start = (_call_accel_interval == 0);
/* convert hz to hrt interval via microseconds */
unsigned ticks = 1000000 / arg;
/* check against maximum sane rate */
if (ticks < 500)
return -EINVAL;
/* adjust filters */
accel_set_driver_lowpass_filter((float)arg, _accel_filter_x.get_cutoff_freq());
/* update interval for next measurement */
/* XXX this is a bit shady, but no other way to adjust... */
_accel_call.period = _call_accel_interval = ticks;
/* if we need to start the poll state machine, do it */
if (want_start)
start();
return OK;
}
}
}
case SENSORIOCGPOLLRATE:
if (_call_accel_interval == 0)
return SENSOR_POLLRATE_MANUAL;
return 1000000 / _call_accel_interval;
case SENSORIOCSQUEUEDEPTH: {
/* lower bound is mandatory, upper bound is a sanity check */
if ((arg < 1) || (arg > 100))
return -EINVAL;
irqstate_t flags = irqsave();
if (!_accel_reports->resize(arg)) {
irqrestore(flags);
return -ENOMEM;
}
irqrestore(flags);
return OK;
}
case SENSORIOCGQUEUEDEPTH:
return _accel_reports->size();
case SENSORIOCRESET:
reset();
return OK;
case ACCELIOCSSAMPLERATE:
return accel_set_samplerate(arg);
case ACCELIOCGSAMPLERATE:
return _accel_samplerate;
case ACCELIOCSLOWPASS: {
return accel_set_driver_lowpass_filter((float)_accel_samplerate, (float)arg);
}
case ACCELIOCGLOWPASS:
return _accel_filter_x.get_cutoff_freq();
case ACCELIOCSSCALE: {
/* copy scale, but only if off by a few percent */
struct accel_scale *s = (struct accel_scale *) arg;
float sum = s->x_scale + s->y_scale + s->z_scale;
if (sum > 2.0f && sum < 4.0f) {
memcpy(&_accel_scale, s, sizeof(_accel_scale));
return OK;
} else {
return -EINVAL;
}
}
case ACCELIOCSRANGE:
/* arg needs to be in G */
return accel_set_range(arg);
case ACCELIOCGRANGE:
/* convert to m/s^2 and return rounded in G */
return (unsigned long)((_accel_range_m_s2)/LSM303D_ONE_G + 0.5f);
case ACCELIOCGSCALE:
/* copy scale out */
memcpy((struct accel_scale *) arg, &_accel_scale, sizeof(_accel_scale));
return OK;
case ACCELIOCSELFTEST:
return accel_self_test();
default:
/* give it to the superclass */
return SPI::ioctl(filp, cmd, arg);
}
}