Beispiel #1
0
/* C code entry point for the boot block */
void bootblock_main(const uint64_t reg_x0,
		    const uint64_t reg_pc)
{
	uint64_t base_timestamp = 0;

	init_timer();

	if (IS_ENABLED(CONFIG_COLLECT_TIMESTAMPS))
		base_timestamp = timestamp_get();

	/* Initialize timestamps if we have TIMESTAMP region in memlayout.ld. */
	if (IS_ENABLED(CONFIG_COLLECT_TIMESTAMPS) && _timestamp_size > 0)
		timestamp_init(base_timestamp);

	bootblock_soc_early_init();
	bootblock_mainboard_early_init();

	if (IS_ENABLED(CONFIG_BOOTBLOCK_CONSOLE)) {
		console_init();
		exception_init();

		if (reg_x0)
			printk(BIOS_ERR,
			       "BOOTBLOCK: RST Boot Failure Code %lld\n",
			       reg_x0);
	}

	bootblock_soc_init();
	bootblock_mainboard_init();

	run_romstage();
}
Beispiel #2
0
void main(void)
{
	bootblock_cpu_init();
	bootblock_mainboard_init();

#if CONFIG_BOOTBLOCK_CONSOLE
	console_init();
#endif

	bootblock_mmu_init();

	run_romstage();
}
void main(void)
{
	init_timer();
	if (IS_ENABLED(CONFIG_HAS_PRECBMEM_TIMESTAMP_REGION))
		timestamp_init(timestamp_get());

	bootblock_mainboard_early_init();

#if CONFIG_BOOTBLOCK_CONSOLE
	console_init();
	exception_init();
#endif

	bootblock_soc_init();
	bootblock_mainboard_init();

	run_romstage();
}
void main(void)
{
	const char *stage_name = "fallback/romstage";
	void *entry;

	bootblock_cpu_init();
	bootblock_mainboard_init();

	if (CONFIG_BOOTBLOCK_CONSOLE) {
		console_init();
		exception_init();
	}

	entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, stage_name);

	if (entry) stage_exit(entry);
	hlt();
}
void main(void)
{
	const char *stage_name = "fallback/romstage";
	void *entry;

	if (boot_cpu()) {
		bootblock_cpu_init();
		bootblock_mainboard_init();
	}

	console_init();
	printk(BIOS_INFO, "hello from bootblock\n");
	printk(BIOS_INFO, "bootblock main(): loading romstage\n");
	entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, stage_name);

	printk(BIOS_INFO, "bootblock main(): jumping to romstage\n");
	if (entry) stage_exit(entry);
	hlt();
}
static void main(unsigned long bist)
{
	u8 boot_mode;
	const char *default_filenames =
		"normal/romstage\0fallback/romstage";

	if (boot_cpu()) {
		bootblock_mainboard_init();

#if CONFIG_USE_OPTION_TABLE
		sanitize_cmos();
#endif
		boot_mode = do_normal_boot();
	} else {

		/* Questionable single byte read from CMOS.
		 * Do not add any other CMOS access in the
		 * bootblock for AP CPUs.
		 */
		boot_mode = boot_use_normal(cmos_read(RTC_BOOT_BYTE));
	}

	char *normal_candidate = (char *)walkcbfs("coreboot-stages");

	if (!normal_candidate)
		normal_candidate = default_filenames;

	unsigned long entry;

	if (boot_mode) {
		entry = findstage(normal_candidate);
		if (entry)
			call(entry, bist);
	}

	entry = findstage(get_fallback(normal_candidate));
	if (entry)
		call(entry, bist);

	/* duh. we're stuck */
	halt();
}
Beispiel #7
0
void main(void)
{
	// enable pinmux clamp inputs
	clamp_tristate_inputs();

	// enable JTAG at the earliest stage
	enable_jtag();

	clock_early_uart();

	// Serial out, tristate off.
	pinmux_set_config(PINMUX_KB_ROW9_INDEX, PINMUX_KB_ROW9_FUNC_UA3);
	// Serial in, tristate_on.
	pinmux_set_config(PINMUX_KB_ROW10_INDEX, PINMUX_KB_ROW10_FUNC_UA3 |
						 PINMUX_PULL_UP |
						 PINMUX_INPUT_ENABLE);
	// Mux some pins away from uart A.
	pinmux_set_config(PINMUX_UART2_CTS_N_INDEX,
			  PINMUX_UART2_CTS_N_FUNC_UB3 |
			  PINMUX_INPUT_ENABLE);
	pinmux_set_config(PINMUX_UART2_RTS_N_INDEX,
			  PINMUX_UART2_RTS_N_FUNC_UB3);

	if (CONFIG_BOOTBLOCK_CONSOLE) {
		console_init();
		exception_init();
	}

	clock_init();

	bootblock_mainboard_init();

	pinmux_set_config(PINMUX_CORE_PWR_REQ_INDEX,
			  PINMUX_CORE_PWR_REQ_FUNC_PWRON);
	pinmux_set_config(PINMUX_CPU_PWR_REQ_INDEX,
			  PINMUX_CPU_PWR_REQ_FUNC_CPU);
	pinmux_set_config(PINMUX_PWR_INT_N_INDEX,
			  PINMUX_PWR_INT_N_FUNC_PMICINTR |
			  PINMUX_INPUT_ENABLE);

	run_romstage();
}
void main(void)
{
	bootblock_cpu_init();

	/* Mainboard basic init */
	bootblock_mainboard_init();

#if CONFIG_BOOTBLOCK_CONSOLE
	console_init();
#endif

	bootblock_mmu_init();

	if (init_extra_hardware()) {
		printk(BIOS_ERR, "bootblock_simple: failed to init HW.\n");
	} else {
		run_romstage();
	}
	halt();
}
Beispiel #9
0
asmlinkage void bootblock_main_with_timestamp(uint64_t base_timestamp)
{
	/* Initialize timestamps if we have TIMESTAMP region in memlayout.ld. */
	if (IS_ENABLED(CONFIG_COLLECT_TIMESTAMPS) && _timestamp_size > 0)
		timestamp_init(base_timestamp);

	cmos_post_init();

	bootblock_soc_early_init();
	bootblock_mainboard_early_init();

	if (IS_ENABLED(CONFIG_BOOTBLOCK_CONSOLE)) {
		console_init();
		exception_init();
	}

	bootblock_soc_init();
	bootblock_mainboard_init();

	run_romstage();
}
Beispiel #10
0
void main(void)
{
	void *entry;

	clock_early_uart();

	// Serial out, tristate off.
	pinmux_set_config(PINMUX_KB_ROW9_INDEX, PINMUX_KB_ROW9_FUNC_UA3);
	// Serial in, tristate_on.
	pinmux_set_config(PINMUX_KB_ROW10_INDEX, PINMUX_KB_ROW10_FUNC_UA3 |
						 PINMUX_TRISTATE |
						 PINMUX_INPUT_ENABLE);

	if (CONFIG_BOOTBLOCK_CONSOLE)
		console_init();

	clock_init();

	bootblock_mainboard_init();

	pinmux_set_config(PINMUX_CORE_PWR_REQ_INDEX,
			  PINMUX_CORE_PWR_REQ_FUNC_PWRON);
	pinmux_set_config(PINMUX_CPU_PWR_REQ_INDEX,
			  PINMUX_CPU_PWR_REQ_FUNC_CPU);
	pinmux_set_config(PINMUX_PWR_INT_N_INDEX,
			  PINMUX_PWR_INT_N_FUNC_PMICINTR |
			  PINMUX_TRISTATE |
			  PINMUX_INPUT_ENABLE);

	power_enable_cpu_rail();
	power_ungate_cpu();

	entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, "fallback/romstage");

	if (entry)
		clock_cpu0_config_and_reset(entry);

	hlt();
}
Beispiel #11
0
void main(void)
{
	// enable JTAG at the earliest stage
	enable_jtag();

	clock_early_uart();

	/* Configure mselect clock. */
	clock_configure_source(mselect, PLLP, 102000);

	/* Enable AVP cache, timer, APB dma, and mselect blocks.  */
	clock_enable_clear_reset(CLK_L_CACHE2 | CLK_L_TMR,
				 CLK_H_APBDMA,
				 0, CLK_V_MSELECT, 0, 0);

	/* Find ODMDATA in IRAM and save it to scratch reg */
	save_odmdata();

	bootblock_mainboard_early_init();

	if (CONFIG_BOOTBLOCK_CONSOLE) {
		console_init();
		exception_init();
		printk(BIOS_INFO, "T132: Bootblock here\n");
	}

	clock_init();

	printk(BIOS_INFO, "T132 bootblock: Clock init done\n");

	pmc_print_rst_status();

	bootblock_mainboard_init();

	printk(BIOS_INFO, "T132 bootblock: Mainboard bootblock init done\n");

	run_romstage();
}
Beispiel #12
0
void main(void)
{
    const char *stage_name = "fallback/romstage";
    void *entry;
    uint32_t sctlr;

    /* Globally disable MMU, caches, and branch prediction (these should
     * be disabled by default on reset) */
    sctlr = read_sctlr();
    sctlr &= ~(SCTLR_M | SCTLR_C | SCTLR_Z | SCTLR_I);
    write_sctlr(sctlr);

    armv7_invalidate_caches();

    /*
     * Re-enable caches and branch prediction. MMU will be set up later.
     * Note: If booting from USB, we need to disable branch prediction
     * before copying from USB into RAM (FIXME: why?)
     */
    sctlr = read_sctlr();
    sctlr |= SCTLR_C | SCTLR_Z | SCTLR_I;
    write_sctlr(sctlr);

    if (boot_cpu()) {
        bootblock_cpu_init();
        bootblock_mainboard_init();
    }

    console_init();
    printk(BIOS_INFO, "hello from bootblock\n");
    printk(BIOS_INFO, "bootblock main(): loading romstage\n");
    entry = cbfs_load_stage(CBFS_DEFAULT_MEDIA, stage_name);

    printk(BIOS_INFO, "bootblock main(): jumping to romstage\n");
    if (entry) stage_exit(entry);
    hlt();
}
Beispiel #13
0
static void main(unsigned long bist)
{
	if (boot_cpu()) {
		bootblock_mainboard_init();

#if CONFIG_USE_OPTION_TABLE
		sanitize_cmos();
#endif
#if CONFIG_CMOS_POST
		cmos_post_init();
#endif
	}

#if CONFIG_SEPARATE_VERSTAGE
	const char* target1 = "fallback/verstage";
#else
	const char* target1 = "fallback/romstage";
#endif

	unsigned long entry;
	entry = findstage(target1);
	if (entry) call(entry, bist);
	halt();
}