static void ddramc_init(void)
{
struct ddramc_register ddramc_reg;
unsigned int reg;
ddramc_reg_config(&ddramc_reg);
pmc_sam9x5_enable_periph_clk(AT91C_ID_MPDDRC);
pmc_enable_system_clock(AT91C_PMC_DDR);
/* MPDDRC I/O Calibration Register */
reg = readl(AT91C_BASE_MPDDRC + MPDDRC_IO_CALIBR);
reg &= ~AT91C_MPDDRC_RDIV;
reg |= AT91C_MPDDRC_RDIV_DDR2_RZQ_50;
reg &= ~AT91C_MPDDRC_TZQIO;
reg |= AT91C_MPDDRC_TZQIO_(100);
writel(reg, (AT91C_BASE_MPDDRC + MPDDRC_IO_CALIBR));
writel(AT91C_MPDDRC_RD_DATA_PATH_TWO_CYCLES,
(AT91C_BASE_MPDDRC + MPDDRC_RD_DATA_PATH));
ddr3_sdram_initialize(AT91C_BASE_MPDDRC, AT91C_BASE_DDRCS, &ddramc_reg);
ddramc_dump_regs(AT91C_BASE_MPDDRC);
}
static void ddramc_init(void)
{
struct ddramc_register ddramc_reg;
unsigned int reg;
ddramc_reg_config(&ddramc_reg);
/* enable ddr2 clock */
pmc_enable_periph_clock(AT91C_ID_MPDDRC);
pmc_enable_system_clock(AT91C_PMC_DDR);
/* configure Shift Sampling Point of Data */
#if defined(CONFIG_BUS_SPEED_148MHZ)
reg = AT91C_MPDDRC_RD_DATA_PATH_NO_SHIFT;
#elif defined(CONFIG_BUS_SPEED_200MHZ)
reg = AT91C_MPDDRC_RD_DATA_PATH_TWO_CYCLES;
#else
reg = AT91C_MPDDRC_RD_DATA_PATH_ONE_CYCLES;
#endif
writel(reg, (AT91C_BASE_MPDDRC + MPDDRC_RD_DATA_PATH));
/* MPDDRC I/O Calibration Register */
reg = readl(AT91C_BASE_MPDDRC + MPDDRC_IO_CALIBR);
reg &= ~AT91C_MPDDRC_RDIV;
reg &= ~AT91C_MPDDRC_TZQIO;
reg &= ~AT91C_MPDDRC_CALCODEP;
reg &= ~AT91C_MPDDRC_CALCODEN;
reg |= AT91C_MPDDRC_RDIV_DDR2_RZQ_50;
#if defined(CONFIG_BUS_SPEED_148MHZ)
reg |= AT91C_MPDDRC_TZQIO_4; /* @ 133 & 148 MHz */
#else
reg |= AT91C_MPDDRC_TZQIO_5; /* @ 170 & 176 MHz */
#endif
reg |= AT91C_MPDDRC_EN_CALIB;
writel(reg, (AT91C_BASE_MPDDRC + MPDDRC_IO_CALIBR));
/* DDRAM2 Controller initialize */
ddram_initialize(AT91C_BASE_MPDDRC, AT91C_BASE_DDRCS, &ddramc_reg);
ddramc_dump_regs(AT91C_BASE_MPDDRC);
}
static void lpddr1_init(void)
{
struct ddramc_register ddramc_reg;
unsigned int reg;
lpddr1_reg_config(&ddramc_reg);
pmc_sam9x5_enable_periph_clk(AT91C_ID_MPDDRC);
pmc_enable_system_clock(AT91C_PMC_DDR);
/*
* Before starting the initialization sequence, the user must force
* the DDR_DQ and DDR_DQS input buffers to always on by setting
* the FDQIEN and FDQSIEN bits in the SFR_DDRCFG register.
*/
pmc_sam9x5_enable_periph_clk(AT91C_ID_SFR);
reg = readl(AT91C_BASE_SFR + SFR_DDRCFG);
reg |= AT91C_DDRCFG_FDQIEN;
reg |= AT91C_DDRCFG_FDQSIEN;
writel(reg, AT91C_BASE_SFR + SFR_DDRCFG);
/* MPDDRC I/O Calibration Register */
reg = readl(AT91C_BASE_MPDDRC + MPDDRC_IO_CALIBR);
reg &= ~AT91C_MPDDRC_RDIV;
reg |= AT91C_MPDDRC_RDIV_DDR2_RZQ_50;
reg &= ~AT91C_MPDDRC_TZQIO;
reg |= AT91C_MPDDRC_TZQIO_(100);
writel(reg, AT91C_BASE_MPDDRC + MPDDRC_IO_CALIBR);
writel(AT91C_MPDDRC_RD_DATA_PATH_ONE_CYCLES,
AT91C_BASE_MPDDRC + MPDDRC_RD_DATA_PATH);
lpddr1_sdram_initialize(AT91C_BASE_MPDDRC,
AT91C_BASE_DDRCS, &ddramc_reg);
ddramc_dump_regs(AT91C_BASE_MPDDRC);
}