/*
* Send or receive packet.
*/
static int sock_xmit(struct socket *sock, int send, void *buf, int size,
int msg_flags)
{
int result;
struct msghdr msg;
struct kvec iov;
unsigned long flags;
sigset_t oldset;
/* Allow interception of SIGKILL only
* Don't allow other signals to interrupt the transmission */
spin_lock_irqsave(¤t->sighand->siglock, flags);
oldset = current->blocked;
sigfillset(¤t->blocked);
sigdelsetmask(¤t->blocked, sigmask(SIGKILL));
recalc_sigpending();
spin_unlock_irqrestore(¤t->sighand->siglock, flags);
do {
sock->sk->sk_allocation = GFP_NOIO;
iov.iov_base = buf;
iov.iov_len = size;
msg.msg_name = NULL;
msg.msg_namelen = 0;
msg.msg_control = NULL;
msg.msg_controllen = 0;
msg.msg_flags = msg_flags | MSG_NOSIGNAL;
if (send)
result = kernel_sendmsg(sock, &msg, &iov, 1, size);
else
result = kernel_recvmsg(sock, &msg, &iov, 1, size, 0);
if (signal_pending(current)) {
siginfo_t info;
spin_lock_irqsave(¤t->sighand->siglock, flags);
printk(KERN_WARNING "nbd (pid %d: %s) got signal %d\n",
current->pid, current->comm,
dequeue_signal(current, ¤t->blocked, &info));
spin_unlock_irqrestore(¤t->sighand->siglock, flags);
result = -EINTR;
break;
}
if (result <= 0) {
if (result == 0)
result = -EPIPE; /* short read */
break;
}
size -= result;
buf += result;
} while (size > 0);
spin_lock_irqsave(¤t->sighand->siglock, flags);
current->blocked = oldset;
recalc_sigpending();
spin_unlock_irqrestore(¤t->sighand->siglock, flags);
return result;
}
static
void masq_forward_signal(struct bproc_masq_master_t *m) {
int signr;
struct siginfo info;
struct bproc_krequest_t *req;
struct bproc_signal_msg_t *msg;
spin_lock_irq(¤t->sighand->siglock);
signr = dequeue_signal(current, ¤t->blocked, &info);
spin_unlock_irq(¤t->sighand->siglock);
if (!signr) {
printk(KERN_ERR "bproc: ghost: signal: signr == 0\n");
return;
}
req = bproc_new_req(BPROC_FWD_SIG, sizeof(*msg), GFP_KERNEL);
if (!req) {
printk(KERN_ERR "bproc: masq: [%d] signal forwarding: Out of memory\n",
(int)current->bproc.pid);
return;
}
msg = (struct bproc_signal_msg_t *) bproc_msg(req);
bpr_to_ghost(msg, current->bproc.pid);
bpr_from_real(msg, current->bproc.pid);
bproc_pack_siginfo(&msg->info, &info);
bproc_send_req(&m->req, req);
bproc_put_req(req);
}
static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, siginfo_t *info,
int nonblock)
{
ssize_t ret;
DECLARE_WAITQUEUE(wait, current);
spin_lock_irq(¤t->sighand->siglock);
ret = dequeue_signal(current, &ctx->sigmask, info);
switch (ret) {
case 0:
if (!nonblock)
break;
ret = -EAGAIN;
default:
spin_unlock_irq(¤t->sighand->siglock);
return ret;
}
add_wait_queue(¤t->sighand->signalfd_wqh, &wait);
for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
ret = dequeue_signal(current, &ctx->sigmask, info);
if (ret != 0)
break;
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
spin_unlock_irq(¤t->sighand->siglock);
schedule();
spin_lock_irq(¤t->sighand->siglock);
}
spin_unlock_irq(¤t->sighand->siglock);
remove_wait_queue(¤t->sighand->signalfd_wqh, &wait);
__set_current_state(TASK_RUNNING);
return ret;
}
/*
* Fairly generic implementation for sending a packet
* should work for tcp, udp and raw connections.
*/
static unsigned int privSocketSend(void *pPtr,
struct iovec *pVec,
unsigned int uVecLength,
unsigned int uDataLength,
void *pName,
unsigned int uNameLength)
{
raw_socket *pRaw = (raw_socket *)pPtr;
unsigned long ulFlags;
sigset_t sigSet;
siginfo_t sigInfo;
struct msghdr mHdr;
unsigned int uSendLength = uDataLength;
unsigned int uVecCurrent = 0;
int iRetries;
int iError;
unsigned int rvalue = 0;
if (NULL != pRaw) {
/* allow sigkill */
spin_lock_irqsave(¤t->sighand->siglock, ulFlags);
sigSet = current->blocked;
sigfillset(¤t->blocked);
sigdelsetmask(¤t->blocked, sigmask(SIGKILL));
recalc_sigpending();
spin_unlock_irqrestore(¤t->sighand->siglock, ulFlags);
mHdr.msg_control = NULL;
mHdr.msg_controllen = 0;
mHdr.msg_flags = MSG_NOSIGNAL | MSG_DONTWAIT;
/* sockaddr stuff */
mHdr.msg_name = pName;
mHdr.msg_namelen = uNameLength;
while ((true == pRaw->bConnected) && (uSendLength > 0)) {
#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0))
mHdr.msg_iov = &pVec [uVecCurrent];
mHdr.msg_iovlen = uVecLength - uVecCurrent;
#endif
iRetries = 0;
iError = 0;
while ((iRetries++ < MAX_RETRIES) && (true == pRaw->bConnected)) {
/* Finally the kernel does it magic, */
#if (LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0))
iError = sock_sendmsg(pRaw->pSocket,
&mHdr,
uSendLength);
#else
iError = kernel_sendmsg(pRaw->pSocket,
&mHdr,
(struct kvec *)&pVec [uVecCurrent],
uVecLength - uVecCurrent,
uSendLength);
#endif
if (signal_pending(current)) {
/* dequeue a sigkill and quiet. */
spin_lock_irqsave(¤t->sighand->siglock, ulFlags);
dequeue_signal(current, ¤t->blocked, &sigInfo);
spin_unlock_irqrestore(¤t->sighand->siglock, ulFlags);
break;
}
switch(iError)
{
case -EAGAIN:
case -ENOSPC:
/* For these errors, les sleep then try again. */
msleep_interruptible(32 << (iRetries % 4));
break;
case 0:
/* Generic TCP has issues, copied from cifs */
KLEM_MSG("Recv TCP size issue\n");
msleep_interruptible(500);
break;
default:
/* must have gotten something more interesting, don't try again */
iRetries = MAX_RETRIES;
break;
}
}
/* Did we send any data? consider simplification*/
if (iError > 0) {
if (iError >= uSendLength) {
/* All sent, full write */
uSendLength -= iError;
rvalue += iError;
} else {
/* fix that partial write */
while ((uVecCurrent < uVecLength) && (iError > 0)) {
if (iError >= pVec [uVecCurrent].iov_len) {
/* We have consumed an entire iov */
uSendLength -= pVec [uVecCurrent].iov_len;
iError -= pVec [uVecCurrent].iov_len;
rvalue += pVec [uVecCurrent].iov_len;
uVecCurrent += 1;
} else {
/* Partial iov consumed case */
pVec [uVecCurrent].iov_len -= iError;
pVec [uVecCurrent].iov_base += iError;
uSendLength -= iError;
rvalue += iError;
iError = 0;
}
}
}
} else {
/* No data was sent, this is an error. */
KLEM_LOG("send error %d\n", iError);
rvalue = 0;
uSendLength = 0;
}
}
/* no more sigkill. */
spin_lock_irqsave(¤t->sighand->siglock, ulFlags);
current->blocked = sigSet;
recalc_sigpending();
spin_unlock_irqrestore(¤t->sighand->siglock, ulFlags);
}
return rvalue;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
int do_signal(struct pt_regs *regs, sigset_t *oldset)
{
siginfo_t info;
struct k_sigaction *ka;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 1;
if (!oldset)
oldset = ¤t->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
{
continue;
}
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sigaddset(¤t->pending.signal, signr);
recalc_sigpending(current);
current->flags |= PF_SIGNALED;
do_exit(exit_code);
/* NOTREACHED */
}
}
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
return 1;
}
/* Did we come from a system call? */
if (PT_REGS_SYSCALL (regs)) {
/* Restart the system call - no handlers present */
if (regs->gpr[GPR_RVAL] == -ERESTARTNOHAND ||
regs->gpr[GPR_RVAL] == -ERESTARTSYS ||
regs->gpr[GPR_RVAL] == -ERESTARTNOINTR) {
regs->gpr[12] = PT_REGS_SYSCALL (regs);
regs->pc -= 8; /* 4 + 8 for microblaze return offset wierdness */
}
}
return 0;
}
int do_signal(sigset_t *oldset, struct pt_regs *regs)
{
siginfo_t info;
struct k_sigaction *ka;
unsigned long frame, newsp;
/*
* If the current thread is 32 bit - invoke the
* 32 bit signal handling code
*/
if (current->thread.flags & PPC_FLAG_32BIT)
return do_signal32(oldset, regs);
if (!oldset)
oldset = ¤t->blocked;
newsp = frame = 0;
for (;;) {
unsigned long signr;
PPCDBG(PPCDBG_SIGNAL, "do_signal - (pre) dequeueing signal - pid=%ld current=%lx comm=%s \n", current->pid, current, current->comm);
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
PPCDBG(PPCDBG_SIGNAL, "do_signal - (aft) dequeueing signal - signal=%lx - pid=%ld current=%lx comm=%s \n", signr, current->pid, current, current->comm);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
PPCDBG(PPCDBG_SIGNAL, "do_signal - ka=%p, action handler=%lx \n", ka, ka->sa.sa_handler);
if (ka->sa.sa_handler == SIG_IGN) {
PPCDBG(PPCDBG_SIGNAL, "do_signal - into SIG_IGN logic \n");
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
PPCDBG(PPCDBG_SIGNAL, "do_signal - into SIG_DFL logic \n");
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP: {
struct signal_struct *sig;
current->state = TASK_STOPPED;
current->exit_code = signr;
sig = current->p_pptr->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
}
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
if ( (ka->sa.sa_flags & SA_ONSTACK)
&& (! on_sig_stack(regs->gpr[1])))
newsp = (current->sas_ss_sp + current->sas_ss_size);
else
newsp = regs->gpr[1];
newsp = frame = newsp - sizeof(struct sigregs);
/* Whee! Actually deliver the signal. */
PPCDBG(PPCDBG_SIGNAL, "do_signal - GOING TO RUN SIGNAL HANDLER - pid=%ld current=%lx comm=%s \n", current->pid, current, current->comm);
handle_signal(signr, ka, &info, oldset, regs, &newsp, frame);
PPCDBG(PPCDBG_SIGNAL, "do_signal - after running signal handler - pid=%ld current=%lx comm=%s \n", current->pid, current, current->comm);
break;
}
if (regs->trap == 0x0C00 /* System Call! */ &&
((int)regs->result == -ERESTARTNOHAND ||
(int)regs->result == -ERESTARTSYS ||
(int)regs->result == -ERESTARTNOINTR)) {
PPCDBG(PPCDBG_SIGNAL, "do_signal - going to back up & retry system call \n");
regs->gpr[3] = regs->orig_gpr3;
regs->nip -= 4; /* Back up & retry system call */
regs->result = 0;
}
if (newsp == frame)
{
PPCDBG(PPCDBG_SIGNAL, "do_signal - returning w/ no signal delivered \n");
return 0; /* no signals delivered */
}
if (ka->sa.sa_flags & SA_SIGINFO)
setup_rt_frame(regs, (struct sigregs *) frame, newsp);
else
setup_frame(regs, (struct sigregs *) frame, newsp);
PPCDBG(PPCDBG_SIGNAL, "do_signal - returning a signal was delivered \n");
return 1;
}
/* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*/
asmlinkage int do_signal(sigset_t *oldset, struct pt_regs * regs,
unsigned long orig_i0, int restart_syscall)
{
unsigned long signr;
siginfo_t info;
struct k_sigaction *ka;
if (!oldset)
oldset = ¤t->blocked;
#ifdef CONFIG_SPARC32_COMPAT
if (current->thread.flags & SPARC_FLAG_32BIT) {
extern asmlinkage int do_signal32(sigset_t *, struct pt_regs *,
unsigned long, int);
return do_signal32(oldset, regs, orig_i0, restart_syscall);
}
#endif
for (;;) {
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Do the syscall restart before we let the debugger
* look at the child registers.
*/
if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
restart_syscall = 0;
}
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* sys_wait4() grabs the master kernel lock, so
* we need not do so, that sucker should be
* threaded and would not be that difficult to
* do anyways.
*/
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
unsigned long exit_code = signr;
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
case SIGSTOP:
if (current->ptrace & PT_PTRACED)
continue;
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags &
SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
#ifdef DEBUG_SIGNALS
/* Very useful to debug the dynamic linker */
printk ("Sig %d going...\n", (int)signr);
show_regs (regs);
#ifdef DEBUG_SIGNALS_TRACE
{
struct reg_window *rw = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS);
unsigned long ins[8];
while (rw &&
!(((unsigned long) rw) & 0x3)) {
copy_from_user(ins, &rw->ins[0], sizeof(ins));
printk("Caller[%016lx](%016lx,%016lx,%016lx,%016lx,%016lx,%016lx)\n", ins[7], ins[0], ins[1], ins[2], ins[3], ins[4], ins[5]);
rw = (struct reg_window *)(unsigned long)(ins[6] + STACK_BIAS);
}
}
#endif
#ifdef DEBUG_SIGNALS_MAPS
printk("Maps:\n");
read_maps();
#endif
#endif
/* fall through */
default:
sig_exit(signr, exit_code, &info);
/* NOT REACHED */
}
}
if (restart_syscall)
syscall_restart(orig_i0, regs, &ka->sa);
handle_signal(signr, ka, &info, oldset, regs);
return 1;
}
if (restart_syscall &&
(regs->u_regs[UREG_I0] == ERESTARTNOHAND ||
regs->u_regs[UREG_I0] == ERESTARTSYS ||
regs->u_regs[UREG_I0] == ERESTARTNOINTR)) {
/* replay the system call when we are done */
regs->u_regs[UREG_I0] = orig_i0;
regs->tpc -= 4;
regs->tnpc -= 4;
}
return 0;
}
int sys32_rt_sigtimedwait(compat_sigset_t *uthese,
siginfo_t32 *uinfo, struct compat_timespec *uts,
compat_time_t sigsetsize)
{
int ret, sig;
sigset_t these;
compat_sigset_t these32;
struct timespec ts;
siginfo_t info;
long timeout = 0;
/*
* As the result of a brainfarting competition a few years ago the
* size of sigset_t for the 32-bit kernel was choosen to be 128 bits
* but nothing so far is actually using that many, 64 are enough. So
* for now we just drop the high bits.
*/
if (copy_from_user (&these32, uthese, sizeof(compat_old_sigset_t)))
return -EFAULT;
switch (_NSIG_WORDS) {
#ifdef __MIPSEB__
case 4: these.sig[3] = these32.sig[6] | (((long)these32.sig[7]) << 32);
case 3: these.sig[2] = these32.sig[4] | (((long)these32.sig[5]) << 32);
case 2: these.sig[1] = these32.sig[2] | (((long)these32.sig[3]) << 32);
case 1: these.sig[0] = these32.sig[0] | (((long)these32.sig[1]) << 32);
#endif
#ifdef __MIPSEL__
case 4: these.sig[3] = these32.sig[7] | (((long)these32.sig[6]) << 32);
case 3: these.sig[2] = these32.sig[5] | (((long)these32.sig[4]) << 32);
case 2: these.sig[1] = these32.sig[3] | (((long)these32.sig[2]) << 32);
case 1: these.sig[0] = these32.sig[1] | (((long)these32.sig[0]) << 32);
#endif
}
/*
* Invert the set of allowed signals to get those we
* want to block.
*/
sigdelsetmask(&these, sigmask(SIGKILL)|sigmask(SIGSTOP));
signotset(&these);
if (uts) {
if (get_user (ts.tv_sec, &uts->tv_sec) ||
get_user (ts.tv_nsec, &uts->tv_nsec))
return -EINVAL;
if (ts.tv_nsec >= 1000000000L || ts.tv_nsec < 0
|| ts.tv_sec < 0)
return -EINVAL;
}
spin_lock_irq(¤t->sighand->siglock);
sig = dequeue_signal(current, &these, &info);
if (!sig) {
/* None ready -- temporarily unblock those we're interested
in so that we'll be awakened when they arrive. */
sigset_t oldblocked = current->blocked;
sigandsets(¤t->blocked, ¤t->blocked, &these);
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
timeout = MAX_SCHEDULE_TIMEOUT;
if (uts)
timeout = (timespec_to_jiffies(&ts)
+ (ts.tv_sec || ts.tv_nsec));
current->state = TASK_INTERRUPTIBLE;
timeout = schedule_timeout(timeout);
spin_lock_irq(¤t->sighand->siglock);
sig = dequeue_signal(current, &these, &info);
current->blocked = oldblocked;
recalc_sigpending();
}
spin_unlock_irq(¤t->sighand->siglock);
if (sig) {
ret = sig;
if (uinfo) {
if (copy_siginfo_to_user32(uinfo, &info))
ret = -EFAULT;
}
} else {
ret = -EAGAIN;
if (timeout)
ret = -EINTR;
}
return ret;
}
/*
* Note that `init' is a special process: it doesn't get signals it doesn't want to
* handle. Thus you cannot kill init even with a SIGKILL even by mistake.
*/
long
ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall)
{
struct signal_struct *sig;
struct k_sigaction *ka;
siginfo_t info;
long restart = in_syscall;
long errno = scr->pt.r8;
/*
* In the ia64_leave_kernel code path, we want the common case to go fast, which
* is why we may in certain cases get here from kernel mode. Just return without
* doing anything if so.
*/
if (!user_mode(&scr->pt))
return 0;
if (!oldset)
oldset = ¤t->blocked;
#ifdef CONFIG_IA32_SUPPORT
if (IS_IA32_PROCESS(&scr->pt)) {
if (in_syscall) {
if (errno >= 0)
restart = 0;
else
errno = -errno;
}
} else
#endif
if (scr->pt.r10 != -1) {
/*
* A system calls has to be restarted only if one of the error codes
* ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned. If r10
* isn't -1 then r8 doesn't hold an error code and we don't need to
* restart the syscall, so we can clear the "restart" flag here.
*/
restart = 0;
}
for (;;) {
unsigned long signr;
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->thread.siginfo = &info;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
signr = current->exit_code;
current->thread.siginfo = 0;
/* We're back. Did the debugger cancel the sig? */
if (!signr)
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr - 1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
sig = current->p_pptr->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, &scr->pt))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
if (restart) {
switch (errno) {
case ERESTARTSYS:
if ((ka->sa.sa_flags & SA_RESTART) == 0) {
case ERESTARTNOHAND:
#ifdef CONFIG_IA32_SUPPORT
if (IS_IA32_PROCESS(&scr->pt))
scr->pt.r8 = -EINTR;
else
#endif
scr->pt.r8 = EINTR;
/* note: scr->pt.r10 is already -1 */
break;
}
case ERESTARTNOINTR:
#ifdef CONFIG_IA32_SUPPORT
if (IS_IA32_PROCESS(&scr->pt)) {
scr->pt.r8 = scr->pt.r1;
scr->pt.cr_iip -= 2;
} else
#endif
ia64_decrement_ip(&scr->pt);
}
}
/* Whee! Actually deliver the signal. If the
delivery failed, we need to continue to iterate in
this loop so we can deliver the SIGSEGV... */
if (handle_signal(signr, ka, &info, oldset, scr))
return 1;
}
/* Did we come from a system call? */
if (restart) {
/* Restart the system call - no handlers present */
if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR) {
#ifdef CONFIG_IA32_SUPPORT
if (IS_IA32_PROCESS(&scr->pt)) {
scr->pt.r8 = scr->pt.r1;
scr->pt.cr_iip -= 2;
} else
#endif
/*
* Note: the syscall number is in r15 which is
* saved in pt_regs so all we need to do here
* is adjust ip so that the "break"
* instruction gets re-executed.
*/
ia64_decrement_ip(&scr->pt);
}
}
return 0;
}
static int jffs2_garbage_collect_thread(void *_c)
{
struct jffs2_sb_info *c = _c;
daemonize();
current->tty = NULL;
c->gc_task = current;
up(&c->gc_thread_start);
sprintf(current->comm, "jffs2_gcd_mtd%d", c->mtd->index);
/* FIXME in the 2.2 backport */
current->nice = 10;
for (;;) {
spin_lock_irq(¤t->sigmask_lock);
siginitsetinv (¤t->blocked, sigmask(SIGHUP) | sigmask(SIGKILL) | sigmask(SIGSTOP) | sigmask(SIGCONT));
recalc_sigpending(current);
spin_unlock_irq(¤t->sigmask_lock);
if (!thread_should_wake(c)) {
set_current_state (TASK_INTERRUPTIBLE);
D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread sleeping...\n"));
}
if (current->need_resched)
schedule();
/* Put_super will send a SIGKILL and then wait on the sem.
*/
while (signal_pending(current)) {
siginfo_t info;
unsigned long signr;
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
switch(signr) {
case SIGSTOP:
D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): SIGSTOP received.\n"));
set_current_state(TASK_STOPPED);
schedule();
break;
case SIGKILL:
D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): SIGKILL received.\n"));
spin_lock_bh(&c->erase_completion_lock);
c->gc_task = NULL;
spin_unlock_bh(&c->erase_completion_lock);
complete_and_exit(&c->gc_thread_exit, 0);
case SIGHUP:
D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): SIGHUP received.\n"));
break;
default:
D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): signal %ld received\n", signr));
}
}
/* We don't want SIGHUP to interrupt us. STOP and KILL are OK though. */
spin_lock_irq(¤t->sigmask_lock);
siginitsetinv (¤t->blocked, sigmask(SIGKILL) | sigmask(SIGSTOP) | sigmask(SIGCONT));
recalc_sigpending(current);
spin_unlock_irq(¤t->sigmask_lock);
D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): pass\n"));
jffs2_garbage_collect_pass(c);
}
}
static int
get_signal_to_deliver(siginfo_t *info, struct pt_regs *regs)
{
for (;;) {
unsigned long signr;
struct k_sigaction *ka;
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
signr = current->exit_code;
if (signr == 0)
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info->si_signo) {
info->si_signo = signr;
info->si_errno = 0;
info->si_code = SI_USER;
info->si_pid = current->p_pptr->pid;
info->si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP: {
struct signal_struct *sig;
current->state = TASK_STOPPED;
current->exit_code = signr;
sig = current->p_pptr->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
}
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, info);
/* NOTREACHED */
}
}
return signr;
}
return 0;
}
int do_signal(struct pt_regs *regs, sigset_t *oldset)
{
siginfo_t info;
struct k_sigaction *ka;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if ((regs->xcs & 3) != 3)
return 1;
if (!oldset)
oldset = ¤t->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr) break;
/* We should probably find a better way to do this. */
if(ssmunch_multi) {
int i;
/* Here's a hack. If we get a signal that's not
* one of the signals sent by ssmunch, then
* we won't print a message, since the ssmunch'd
* process is probably dead or mostly dead.
* Mostly dead is not quite the same as dead; for more
* information on this topic please see Miracle Max.
*/
for(i = 0; i < 32; i++) {
if(ssmunch_multi&(1<<i)) break;
}
if(i == 32) goto no_ssmunch;
/* HAHA! ^^^^ I used a goto! Now I'm a real
* kernel h4x0r!
*/
printk("do_signal: multiple signals: ");
for(i = 0; i < 32; i++) {
if(ssmunch_multi&(1<<i)) printk("%d ", i);
}
printk("\n");
no_ssmunch:
ssmunch_multi = 0;
}
if ((current->flags & PF_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
lock_kernel();
if (current->binfmt
&& current->binfmt->core_dump
&& current->binfmt->core_dump(signr, regs))
exit_code |= 0x80;
unlock_kernel();
/* FALLTHRU */
default:
lock_kernel();
sigaddset(¤t->signal, signr);
recalc_sigpending(current);
current->flags |= PF_SIGNALED;
/*
printk("do_signal: do_exit with %d\n",
exit_code);
*/
do_exit(exit_code);
/* NOTREACHED */
}
}
/* Whee! Actually deliver the signal. */
/*
printk("do_signal: handle_signal with %d\n", signr);
*/
handle_signal(signr, ka, &info, oldset, regs);
return 1;
}
/* Did we come from a system call? */
if (regs->orig_eax >= 0) {
/* Restart the system call - no handlers present */
if (regs->eax == -ERESTARTNOHAND ||
regs->eax == -ERESTARTSYS ||
regs->eax == -ERESTARTNOINTR) {
regs->eax = regs->orig_eax;
regs->eip -= 2;
}
}
return 0;
}
asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs)
{
struct k_sigaction *ka;
siginfo_t info;
if (!oldset)
oldset = ¤t->blocked;
for (;;) {
unsigned long signr;
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
continue;
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sigaddset(¤t->pending.signal, signr);
recalc_sigpending(current);
current->flags |= PF_SIGNALED;
do_exit(exit_code);
/* NOTREACHED */
}
}
if (regs->regs[0])
syscall_restart(regs, ka);
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
return 1;
}
/*
* Who's code doesn't conform to the restartable syscall convention
* dies here!!! The li instruction, a single machine instruction,
* must directly be followed by the syscall instruction.
*/
if (regs->regs[0]) {
if (regs->regs[2] == ERESTARTNOHAND ||
regs->regs[2] == ERESTARTSYS ||
regs->regs[2] == ERESTARTNOINTR) {
regs->cp0_epc -= 8;
}
}
return 0;
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*/
asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall)
{
struct k_sigaction *ka;
siginfo_t info;
int single_stepping;
/*
* We want the common case to go fast, which
* is why we may in certain cases get here from
* kernel mode. Just return without doing anything
* if so.
*/
if (!user_mode(regs))
return 0;
if (!oldset)
oldset = ¤t->blocked;
single_stepping = ptrace_cancel_bpt(current);
for (;;) {
unsigned long signr;
spin_lock_irq (¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq (¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG:
continue;
case SIGTSTP: case SIGTTIN: case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP: {
struct signal_struct *sig;
current->state = TASK_STOPPED;
current->exit_code = signr;
sig = current->p_pptr->sig;
if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
continue;
}
case SIGQUIT: case SIGILL: case SIGTRAP:
case SIGABRT: case SIGFPE: case SIGSEGV:
case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
sig_exit(signr, exit_code, &info);
/* NOTREACHED */
}
}
/* Are we from a system call? */
if (syscall) {
switch (regs->ARM_r0) {
case -ERESTARTNOHAND:
regs->ARM_r0 = -EINTR;
break;
case -ERESTARTSYS:
if (!(ka->sa.sa_flags & SA_RESTART)) {
regs->ARM_r0 = -EINTR;
break;
}
/* fallthrough */
case -ERESTARTNOINTR:
restart_syscall(regs);
break;
}
}
/* Whee! Actually deliver the signal. */
handle_signal(signr, ka, &info, oldset, regs);
if (single_stepping)
ptrace_set_bpt(current);
return 1;
}
if (syscall &&
(regs->ARM_r0 == -ERESTARTNOHAND ||
regs->ARM_r0 == -ERESTARTSYS ||
regs->ARM_r0 == -ERESTARTNOINTR)) {
restart_syscall(regs);
}
if (single_stepping)
ptrace_set_bpt(current);
return 0;
}
/*
* This task waits until at least one touchscreen is touched. It then loops
* digitizing and generating events until no touchscreens are being touched.
*/
static int
xts_thread(void *arg)
{
int any_pens_down;
struct xts_dev *dev;
struct task_struct *tsk = current;
DECLARE_WAITQUEUE(wait, tsk);
xts_task = tsk;
daemonize();
reparent_to_init();
strcpy(xts_task->comm, XTS_NAME);
xts_task->tty = NULL;
/* only want to receive SIGKILL */
spin_lock_irq(&xts_task->sigmask_lock);
siginitsetinv(&xts_task->blocked, sigmask(SIGKILL));
recalc_sigpending(xts_task);
spin_unlock_irq(&xts_task->sigmask_lock);
complete(&task_sync);
add_wait_queue(&irq_wait, &wait);
any_pens_down = 0;
for (;;) {
/*
* Block waiting for interrupt or if any pens are down, either
* an interrupt or timeout to sample again.
*/
set_current_state(TASK_INTERRUPTIBLE);
if (any_pens_down)
schedule_timeout(HZ / 100);
while (signal_pending(tsk)) {
siginfo_t info;
/* Only honor the signal if we're cleaning up */
if (task_shutdown)
goto exit;
/*
* Someone else sent us a kill (probably the
* shutdown scripts "Sending all processes the
* KILL signal"). Just dequeue it and ignore
* it.
*/
spin_lock_irq(¤t->sigmask_lock);
(void)dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
}
schedule();
any_pens_down = 0;
for (dev = dev_list; dev; dev = dev->next_dev) {
if (dev->pen_is_down) {
u32 x, y;
XTouchscreen_GetPosition_2D(&dev->Touchscreen,
&x, &y);
event_add(dev, 255, (u16) x, (u16) y);
dev->pen_was_down = 1;
any_pens_down = 1;
} else if (dev->pen_was_down) {
event_add(dev, 0, 0, 0);
dev->pen_was_down = 0;
}
}
}
exit:
remove_wait_queue(&irq_wait, &wait);
xts_task = NULL;
complete_and_exit(&task_sync, 0);
}
/*
* Note that 'init' is a special process: it doesn't get signals it doesn't
* want to handle. Thus you cannot kill init even with a SIGKILL even by
* mistake.
*
* Note that we go through the signals twice: once to check the signals that
* the kernel can handle, and then we build all the user-level signal handling
* stack-frames in one go after that.
*
* "r0" and "r19" are the registers we need to restore for system call
* restart. "r0" is also used as an indicator whether we can restart at
* all (if we get here from anything but a syscall return, it will be 0)
*/
asmlinkage int
do_signal(sigset_t *oldset, struct pt_regs * regs, struct switch_stack * sw,
unsigned long r0, unsigned long r19)
{
unsigned long single_stepping = ptrace_cancel_bpt(current);
if (!oldset)
oldset = ¤t->blocked;
while (1) {
unsigned long signr;
struct k_sigaction *ka;
siginfo_t info;
spin_lock_irq(¤t->sigmask_lock);
signr = dequeue_signal(¤t->blocked, &info);
spin_unlock_irq(¤t->sigmask_lock);
if (!signr)
break;
if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) {
/* Let the debugger run. */
current->exit_code = signr;
current->state = TASK_STOPPED;
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
/* We're back. Did the debugger cancel the sig? */
if (!(signr = current->exit_code))
continue;
current->exit_code = 0;
/* The debugger continued. Ignore SIGSTOP. */
if (signr == SIGSTOP)
continue;
/* Update the siginfo structure. Is this good? */
if (signr != info.si_signo) {
info.si_signo = signr;
info.si_errno = 0;
info.si_code = SI_USER;
info.si_pid = current->p_pptr->pid;
info.si_uid = current->p_pptr->uid;
}
/* If the (new) signal is now blocked, requeue it. */
if (sigismember(¤t->blocked, signr)) {
send_sig_info(signr, &info, current);
continue;
}
}
ka = ¤t->sig->action[signr-1];
if (ka->sa.sa_handler == SIG_IGN) {
if (signr != SIGCHLD)
continue;
/* Check for SIGCHLD: it's special. */
while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0)
/* nothing */;
continue;
}
if (ka->sa.sa_handler == SIG_DFL) {
int exit_code = signr & 0x7f;
/* Init gets no signals it doesn't want. */
if (current->pid == 1)
continue;
switch (signr) {
case SIGCONT:
case SIGCHLD:
case SIGWINCH:
continue;
case SIGTSTP:
case SIGTTIN:
case SIGTTOU:
if (is_orphaned_pgrp(current->pgrp))
continue;
/* FALLTHRU */
case SIGSTOP:
current->state = TASK_STOPPED;
current->exit_code = signr;
if (!(current->p_pptr->sig->action[SIGCHLD-1]
.sa.sa_flags & SA_NOCLDSTOP))
notify_parent(current, SIGCHLD);
schedule();
single_stepping |= ptrace_cancel_bpt(current);
continue;
case SIGQUIT:
case SIGILL:
case SIGTRAP:
case SIGABRT:
case SIGFPE:
case SIGSEGV:
case SIGBUS:
case SIGSYS:
case SIGXCPU:
case SIGXFSZ:
if (do_coredump(signr, regs))
exit_code |= 0x80;
/* FALLTHRU */
default:
lock_kernel();
sigaddset(¤t->pending.signal, signr);
current->flags |= PF_SIGNALED;
do_exit(exit_code);
/* NOTREACHED */
}
continue;
}
/* Whee! Actually deliver the signal. */
if (r0) syscall_restart(r0, r19, regs, ka);
handle_signal(signr, ka, &info, oldset, regs, sw);
if (single_stepping)
ptrace_set_bpt(current); /* re-set bpt */
return 1;
}
if (r0 &&
(regs->r0 == ERESTARTNOHAND ||
regs->r0 == ERESTARTSYS ||
regs->r0 == ERESTARTNOINTR)) {
regs->r0 = r0; /* reset v0 and a3 and replay syscall */
regs->r19 = r19;
regs->pc -= 4;
}
if (single_stepping)
ptrace_set_bpt(current); /* re-set breakpoint */
return 0;
}