/* * Send or receive packet. */ static int sock_xmit(struct socket *sock, int send, void *buf, int size, int msg_flags) { int result; struct msghdr msg; struct kvec iov; unsigned long flags; sigset_t oldset; /* Allow interception of SIGKILL only * Don't allow other signals to interrupt the transmission */ spin_lock_irqsave(¤t->sighand->siglock, flags); oldset = current->blocked; sigfillset(¤t->blocked); sigdelsetmask(¤t->blocked, sigmask(SIGKILL)); recalc_sigpending(); spin_unlock_irqrestore(¤t->sighand->siglock, flags); do { sock->sk->sk_allocation = GFP_NOIO; iov.iov_base = buf; iov.iov_len = size; msg.msg_name = NULL; msg.msg_namelen = 0; msg.msg_control = NULL; msg.msg_controllen = 0; msg.msg_flags = msg_flags | MSG_NOSIGNAL; if (send) result = kernel_sendmsg(sock, &msg, &iov, 1, size); else result = kernel_recvmsg(sock, &msg, &iov, 1, size, 0); if (signal_pending(current)) { siginfo_t info; spin_lock_irqsave(¤t->sighand->siglock, flags); printk(KERN_WARNING "nbd (pid %d: %s) got signal %d\n", current->pid, current->comm, dequeue_signal(current, ¤t->blocked, &info)); spin_unlock_irqrestore(¤t->sighand->siglock, flags); result = -EINTR; break; } if (result <= 0) { if (result == 0) result = -EPIPE; /* short read */ break; } size -= result; buf += result; } while (size > 0); spin_lock_irqsave(¤t->sighand->siglock, flags); current->blocked = oldset; recalc_sigpending(); spin_unlock_irqrestore(¤t->sighand->siglock, flags); return result; }
static void masq_forward_signal(struct bproc_masq_master_t *m) { int signr; struct siginfo info; struct bproc_krequest_t *req; struct bproc_signal_msg_t *msg; spin_lock_irq(¤t->sighand->siglock); signr = dequeue_signal(current, ¤t->blocked, &info); spin_unlock_irq(¤t->sighand->siglock); if (!signr) { printk(KERN_ERR "bproc: ghost: signal: signr == 0\n"); return; } req = bproc_new_req(BPROC_FWD_SIG, sizeof(*msg), GFP_KERNEL); if (!req) { printk(KERN_ERR "bproc: masq: [%d] signal forwarding: Out of memory\n", (int)current->bproc.pid); return; } msg = (struct bproc_signal_msg_t *) bproc_msg(req); bpr_to_ghost(msg, current->bproc.pid); bpr_from_real(msg, current->bproc.pid); bproc_pack_siginfo(&msg->info, &info); bproc_send_req(&m->req, req); bproc_put_req(req); }
static ssize_t signalfd_dequeue(struct signalfd_ctx *ctx, siginfo_t *info, int nonblock) { ssize_t ret; DECLARE_WAITQUEUE(wait, current); spin_lock_irq(¤t->sighand->siglock); ret = dequeue_signal(current, &ctx->sigmask, info); switch (ret) { case 0: if (!nonblock) break; ret = -EAGAIN; default: spin_unlock_irq(¤t->sighand->siglock); return ret; } add_wait_queue(¤t->sighand->signalfd_wqh, &wait); for (;;) { set_current_state(TASK_INTERRUPTIBLE); ret = dequeue_signal(current, &ctx->sigmask, info); if (ret != 0) break; if (signal_pending(current)) { ret = -ERESTARTSYS; break; } spin_unlock_irq(¤t->sighand->siglock); schedule(); spin_lock_irq(¤t->sighand->siglock); } spin_unlock_irq(¤t->sighand->siglock); remove_wait_queue(¤t->sighand->signalfd_wqh, &wait); __set_current_state(TASK_RUNNING); return ret; }
/* * Fairly generic implementation for sending a packet * should work for tcp, udp and raw connections. */ static unsigned int privSocketSend(void *pPtr, struct iovec *pVec, unsigned int uVecLength, unsigned int uDataLength, void *pName, unsigned int uNameLength) { raw_socket *pRaw = (raw_socket *)pPtr; unsigned long ulFlags; sigset_t sigSet; siginfo_t sigInfo; struct msghdr mHdr; unsigned int uSendLength = uDataLength; unsigned int uVecCurrent = 0; int iRetries; int iError; unsigned int rvalue = 0; if (NULL != pRaw) { /* allow sigkill */ spin_lock_irqsave(¤t->sighand->siglock, ulFlags); sigSet = current->blocked; sigfillset(¤t->blocked); sigdelsetmask(¤t->blocked, sigmask(SIGKILL)); recalc_sigpending(); spin_unlock_irqrestore(¤t->sighand->siglock, ulFlags); mHdr.msg_control = NULL; mHdr.msg_controllen = 0; mHdr.msg_flags = MSG_NOSIGNAL | MSG_DONTWAIT; /* sockaddr stuff */ mHdr.msg_name = pName; mHdr.msg_namelen = uNameLength; while ((true == pRaw->bConnected) && (uSendLength > 0)) { #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0)) mHdr.msg_iov = &pVec [uVecCurrent]; mHdr.msg_iovlen = uVecLength - uVecCurrent; #endif iRetries = 0; iError = 0; while ((iRetries++ < MAX_RETRIES) && (true == pRaw->bConnected)) { /* Finally the kernel does it magic, */ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,19,0)) iError = sock_sendmsg(pRaw->pSocket, &mHdr, uSendLength); #else iError = kernel_sendmsg(pRaw->pSocket, &mHdr, (struct kvec *)&pVec [uVecCurrent], uVecLength - uVecCurrent, uSendLength); #endif if (signal_pending(current)) { /* dequeue a sigkill and quiet. */ spin_lock_irqsave(¤t->sighand->siglock, ulFlags); dequeue_signal(current, ¤t->blocked, &sigInfo); spin_unlock_irqrestore(¤t->sighand->siglock, ulFlags); break; } switch(iError) { case -EAGAIN: case -ENOSPC: /* For these errors, les sleep then try again. */ msleep_interruptible(32 << (iRetries % 4)); break; case 0: /* Generic TCP has issues, copied from cifs */ KLEM_MSG("Recv TCP size issue\n"); msleep_interruptible(500); break; default: /* must have gotten something more interesting, don't try again */ iRetries = MAX_RETRIES; break; } } /* Did we send any data? consider simplification*/ if (iError > 0) { if (iError >= uSendLength) { /* All sent, full write */ uSendLength -= iError; rvalue += iError; } else { /* fix that partial write */ while ((uVecCurrent < uVecLength) && (iError > 0)) { if (iError >= pVec [uVecCurrent].iov_len) { /* We have consumed an entire iov */ uSendLength -= pVec [uVecCurrent].iov_len; iError -= pVec [uVecCurrent].iov_len; rvalue += pVec [uVecCurrent].iov_len; uVecCurrent += 1; } else { /* Partial iov consumed case */ pVec [uVecCurrent].iov_len -= iError; pVec [uVecCurrent].iov_base += iError; uSendLength -= iError; rvalue += iError; iError = 0; } } } } else { /* No data was sent, this is an error. */ KLEM_LOG("send error %d\n", iError); rvalue = 0; uSendLength = 0; } } /* no more sigkill. */ spin_lock_irqsave(¤t->sighand->siglock, ulFlags); current->blocked = sigSet; recalc_sigpending(); spin_unlock_irqrestore(¤t->sighand->siglock, ulFlags); } return rvalue; }
/* * Note that 'init' is a special process: it doesn't get signals it doesn't * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. * * Note that we go through the signals twice: once to check the signals that * the kernel can handle, and then we build all the user-level signal handling * stack-frames in one go after that. */ int do_signal(struct pt_regs *regs, sigset_t *oldset) { siginfo_t info; struct k_sigaction *ka; /* * We want the common case to go fast, which * is why we may in certain cases get here from * kernel mode. Just return without doing anything * if so. */ if (!user_mode(regs)) return 1; if (!oldset) oldset = ¤t->blocked; for (;;) { unsigned long signr; spin_lock_irq(¤t->sigmask_lock); signr = dequeue_signal(¤t->blocked, &info); spin_unlock_irq(¤t->sigmask_lock); if (!signr) break; if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) { /* Let the debugger run. */ current->exit_code = signr; current->state = TASK_STOPPED; notify_parent(current, SIGCHLD); schedule(); /* We're back. Did the debugger cancel the sig? */ if (!(signr = current->exit_code)) continue; current->exit_code = 0; /* The debugger continued. Ignore SIGSTOP. */ if (signr == SIGSTOP) continue; /* Update the siginfo structure. Is this good? */ if (signr != info.si_signo) { info.si_signo = signr; info.si_errno = 0; info.si_code = SI_USER; info.si_pid = current->p_pptr->pid; info.si_uid = current->p_pptr->uid; } /* If the (new) signal is now blocked, requeue it. */ if (sigismember(¤t->blocked, signr)) { send_sig_info(signr, &info, current); continue; } } ka = ¤t->sig->action[signr-1]; if (ka->sa.sa_handler == SIG_IGN) { if (signr != SIGCHLD) continue; /* Check for SIGCHLD: it's special. */ while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0) /* nothing */; continue; } if (ka->sa.sa_handler == SIG_DFL) { int exit_code = signr; /* Init gets no signals it doesn't want. */ if (current->pid == 1) continue; switch (signr) { case SIGCONT: case SIGCHLD: case SIGWINCH: continue; case SIGTSTP: case SIGTTIN: case SIGTTOU: if (is_orphaned_pgrp(current->pgrp)) { continue; } /* FALLTHRU */ case SIGSTOP: current->state = TASK_STOPPED; current->exit_code = signr; if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP)) notify_parent(current, SIGCHLD); schedule(); continue; case SIGQUIT: case SIGILL: case SIGTRAP: case SIGABRT: case SIGFPE: case SIGSEGV: case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ: if (do_coredump(signr, regs)) exit_code |= 0x80; /* FALLTHRU */ default: sigaddset(¤t->pending.signal, signr); recalc_sigpending(current); current->flags |= PF_SIGNALED; do_exit(exit_code); /* NOTREACHED */ } } /* Whee! Actually deliver the signal. */ handle_signal(signr, ka, &info, oldset, regs); return 1; } /* Did we come from a system call? */ if (PT_REGS_SYSCALL (regs)) { /* Restart the system call - no handlers present */ if (regs->gpr[GPR_RVAL] == -ERESTARTNOHAND || regs->gpr[GPR_RVAL] == -ERESTARTSYS || regs->gpr[GPR_RVAL] == -ERESTARTNOINTR) { regs->gpr[12] = PT_REGS_SYSCALL (regs); regs->pc -= 8; /* 4 + 8 for microblaze return offset wierdness */ } } return 0; }
int do_signal(sigset_t *oldset, struct pt_regs *regs) { siginfo_t info; struct k_sigaction *ka; unsigned long frame, newsp; /* * If the current thread is 32 bit - invoke the * 32 bit signal handling code */ if (current->thread.flags & PPC_FLAG_32BIT) return do_signal32(oldset, regs); if (!oldset) oldset = ¤t->blocked; newsp = frame = 0; for (;;) { unsigned long signr; PPCDBG(PPCDBG_SIGNAL, "do_signal - (pre) dequeueing signal - pid=%ld current=%lx comm=%s \n", current->pid, current, current->comm); spin_lock_irq(¤t->sigmask_lock); signr = dequeue_signal(¤t->blocked, &info); spin_unlock_irq(¤t->sigmask_lock); PPCDBG(PPCDBG_SIGNAL, "do_signal - (aft) dequeueing signal - signal=%lx - pid=%ld current=%lx comm=%s \n", signr, current->pid, current, current->comm); if (!signr) break; if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) { /* Let the debugger run. */ current->exit_code = signr; current->state = TASK_STOPPED; notify_parent(current, SIGCHLD); schedule(); /* We're back. Did the debugger cancel the sig? */ if (!(signr = current->exit_code)) continue; current->exit_code = 0; /* The debugger continued. Ignore SIGSTOP. */ if (signr == SIGSTOP) continue; /* Update the siginfo structure. Is this good? */ if (signr != info.si_signo) { info.si_signo = signr; info.si_errno = 0; info.si_code = SI_USER; info.si_pid = current->p_pptr->pid; info.si_uid = current->p_pptr->uid; } /* If the (new) signal is now blocked, requeue it. */ if (sigismember(¤t->blocked, signr)) { send_sig_info(signr, &info, current); continue; } } ka = ¤t->sig->action[signr-1]; PPCDBG(PPCDBG_SIGNAL, "do_signal - ka=%p, action handler=%lx \n", ka, ka->sa.sa_handler); if (ka->sa.sa_handler == SIG_IGN) { PPCDBG(PPCDBG_SIGNAL, "do_signal - into SIG_IGN logic \n"); if (signr != SIGCHLD) continue; /* Check for SIGCHLD: it's special. */ while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0) /* nothing */; continue; } if (ka->sa.sa_handler == SIG_DFL) { int exit_code = signr; PPCDBG(PPCDBG_SIGNAL, "do_signal - into SIG_DFL logic \n"); /* Init gets no signals it doesn't want. */ if (current->pid == 1) continue; switch (signr) { case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG: continue; case SIGTSTP: case SIGTTIN: case SIGTTOU: if (is_orphaned_pgrp(current->pgrp)) continue; /* FALLTHRU */ case SIGSTOP: { struct signal_struct *sig; current->state = TASK_STOPPED; current->exit_code = signr; sig = current->p_pptr->sig; if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP)) notify_parent(current, SIGCHLD); schedule(); continue; } case SIGQUIT: case SIGILL: case SIGTRAP: case SIGABRT: case SIGFPE: case SIGSEGV: case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ: if (do_coredump(signr, regs)) exit_code |= 0x80; /* FALLTHRU */ default: sig_exit(signr, exit_code, &info); /* NOTREACHED */ } } if ( (ka->sa.sa_flags & SA_ONSTACK) && (! on_sig_stack(regs->gpr[1]))) newsp = (current->sas_ss_sp + current->sas_ss_size); else newsp = regs->gpr[1]; newsp = frame = newsp - sizeof(struct sigregs); /* Whee! Actually deliver the signal. */ PPCDBG(PPCDBG_SIGNAL, "do_signal - GOING TO RUN SIGNAL HANDLER - pid=%ld current=%lx comm=%s \n", current->pid, current, current->comm); handle_signal(signr, ka, &info, oldset, regs, &newsp, frame); PPCDBG(PPCDBG_SIGNAL, "do_signal - after running signal handler - pid=%ld current=%lx comm=%s \n", current->pid, current, current->comm); break; } if (regs->trap == 0x0C00 /* System Call! */ && ((int)regs->result == -ERESTARTNOHAND || (int)regs->result == -ERESTARTSYS || (int)regs->result == -ERESTARTNOINTR)) { PPCDBG(PPCDBG_SIGNAL, "do_signal - going to back up & retry system call \n"); regs->gpr[3] = regs->orig_gpr3; regs->nip -= 4; /* Back up & retry system call */ regs->result = 0; } if (newsp == frame) { PPCDBG(PPCDBG_SIGNAL, "do_signal - returning w/ no signal delivered \n"); return 0; /* no signals delivered */ } if (ka->sa.sa_flags & SA_SIGINFO) setup_rt_frame(regs, (struct sigregs *) frame, newsp); else setup_frame(regs, (struct sigregs *) frame, newsp); PPCDBG(PPCDBG_SIGNAL, "do_signal - returning a signal was delivered \n"); return 1; }
/* Note that 'init' is a special process: it doesn't get signals it doesn't * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. */ asmlinkage int do_signal(sigset_t *oldset, struct pt_regs * regs, unsigned long orig_i0, int restart_syscall) { unsigned long signr; siginfo_t info; struct k_sigaction *ka; if (!oldset) oldset = ¤t->blocked; #ifdef CONFIG_SPARC32_COMPAT if (current->thread.flags & SPARC_FLAG_32BIT) { extern asmlinkage int do_signal32(sigset_t *, struct pt_regs *, unsigned long, int); return do_signal32(oldset, regs, orig_i0, restart_syscall); } #endif for (;;) { spin_lock_irq(¤t->sigmask_lock); signr = dequeue_signal(¤t->blocked, &info); spin_unlock_irq(¤t->sigmask_lock); if (!signr) break; if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) { /* Do the syscall restart before we let the debugger * look at the child registers. */ if (restart_syscall && (regs->u_regs[UREG_I0] == ERESTARTNOHAND || regs->u_regs[UREG_I0] == ERESTARTSYS || regs->u_regs[UREG_I0] == ERESTARTNOINTR)) { regs->u_regs[UREG_I0] = orig_i0; regs->tpc -= 4; regs->tnpc -= 4; restart_syscall = 0; } current->exit_code = signr; current->state = TASK_STOPPED; notify_parent(current, SIGCHLD); schedule(); if (!(signr = current->exit_code)) continue; current->exit_code = 0; if (signr == SIGSTOP) continue; /* Update the siginfo structure. Is this good? */ if (signr != info.si_signo) { info.si_signo = signr; info.si_errno = 0; info.si_code = SI_USER; info.si_pid = current->p_pptr->pid; info.si_uid = current->p_pptr->uid; } /* If the (new) signal is now blocked, requeue it. */ if (sigismember(¤t->blocked, signr)) { send_sig_info(signr, &info, current); continue; } } ka = ¤t->sig->action[signr-1]; if (ka->sa.sa_handler == SIG_IGN) { if (signr != SIGCHLD) continue; /* sys_wait4() grabs the master kernel lock, so * we need not do so, that sucker should be * threaded and would not be that difficult to * do anyways. */ while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0) ; continue; } if (ka->sa.sa_handler == SIG_DFL) { unsigned long exit_code = signr; if (current->pid == 1) continue; switch (signr) { case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG: continue; case SIGTSTP: case SIGTTIN: case SIGTTOU: if (is_orphaned_pgrp(current->pgrp)) continue; case SIGSTOP: if (current->ptrace & PT_PTRACED) continue; current->state = TASK_STOPPED; current->exit_code = signr; if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP)) notify_parent(current, SIGCHLD); schedule(); continue; case SIGQUIT: case SIGILL: case SIGTRAP: case SIGABRT: case SIGFPE: case SIGSEGV: case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ: if (do_coredump(signr, regs)) exit_code |= 0x80; #ifdef DEBUG_SIGNALS /* Very useful to debug the dynamic linker */ printk ("Sig %d going...\n", (int)signr); show_regs (regs); #ifdef DEBUG_SIGNALS_TRACE { struct reg_window *rw = (struct reg_window *)(regs->u_regs[UREG_FP] + STACK_BIAS); unsigned long ins[8]; while (rw && !(((unsigned long) rw) & 0x3)) { copy_from_user(ins, &rw->ins[0], sizeof(ins)); printk("Caller[%016lx](%016lx,%016lx,%016lx,%016lx,%016lx,%016lx)\n", ins[7], ins[0], ins[1], ins[2], ins[3], ins[4], ins[5]); rw = (struct reg_window *)(unsigned long)(ins[6] + STACK_BIAS); } } #endif #ifdef DEBUG_SIGNALS_MAPS printk("Maps:\n"); read_maps(); #endif #endif /* fall through */ default: sig_exit(signr, exit_code, &info); /* NOT REACHED */ } } if (restart_syscall) syscall_restart(orig_i0, regs, &ka->sa); handle_signal(signr, ka, &info, oldset, regs); return 1; } if (restart_syscall && (regs->u_regs[UREG_I0] == ERESTARTNOHAND || regs->u_regs[UREG_I0] == ERESTARTSYS || regs->u_regs[UREG_I0] == ERESTARTNOINTR)) { /* replay the system call when we are done */ regs->u_regs[UREG_I0] = orig_i0; regs->tpc -= 4; regs->tnpc -= 4; } return 0; }
int sys32_rt_sigtimedwait(compat_sigset_t *uthese, siginfo_t32 *uinfo, struct compat_timespec *uts, compat_time_t sigsetsize) { int ret, sig; sigset_t these; compat_sigset_t these32; struct timespec ts; siginfo_t info; long timeout = 0; /* * As the result of a brainfarting competition a few years ago the * size of sigset_t for the 32-bit kernel was choosen to be 128 bits * but nothing so far is actually using that many, 64 are enough. So * for now we just drop the high bits. */ if (copy_from_user (&these32, uthese, sizeof(compat_old_sigset_t))) return -EFAULT; switch (_NSIG_WORDS) { #ifdef __MIPSEB__ case 4: these.sig[3] = these32.sig[6] | (((long)these32.sig[7]) << 32); case 3: these.sig[2] = these32.sig[4] | (((long)these32.sig[5]) << 32); case 2: these.sig[1] = these32.sig[2] | (((long)these32.sig[3]) << 32); case 1: these.sig[0] = these32.sig[0] | (((long)these32.sig[1]) << 32); #endif #ifdef __MIPSEL__ case 4: these.sig[3] = these32.sig[7] | (((long)these32.sig[6]) << 32); case 3: these.sig[2] = these32.sig[5] | (((long)these32.sig[4]) << 32); case 2: these.sig[1] = these32.sig[3] | (((long)these32.sig[2]) << 32); case 1: these.sig[0] = these32.sig[1] | (((long)these32.sig[0]) << 32); #endif } /* * Invert the set of allowed signals to get those we * want to block. */ sigdelsetmask(&these, sigmask(SIGKILL)|sigmask(SIGSTOP)); signotset(&these); if (uts) { if (get_user (ts.tv_sec, &uts->tv_sec) || get_user (ts.tv_nsec, &uts->tv_nsec)) return -EINVAL; if (ts.tv_nsec >= 1000000000L || ts.tv_nsec < 0 || ts.tv_sec < 0) return -EINVAL; } spin_lock_irq(¤t->sighand->siglock); sig = dequeue_signal(current, &these, &info); if (!sig) { /* None ready -- temporarily unblock those we're interested in so that we'll be awakened when they arrive. */ sigset_t oldblocked = current->blocked; sigandsets(¤t->blocked, ¤t->blocked, &these); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); timeout = MAX_SCHEDULE_TIMEOUT; if (uts) timeout = (timespec_to_jiffies(&ts) + (ts.tv_sec || ts.tv_nsec)); current->state = TASK_INTERRUPTIBLE; timeout = schedule_timeout(timeout); spin_lock_irq(¤t->sighand->siglock); sig = dequeue_signal(current, &these, &info); current->blocked = oldblocked; recalc_sigpending(); } spin_unlock_irq(¤t->sighand->siglock); if (sig) { ret = sig; if (uinfo) { if (copy_siginfo_to_user32(uinfo, &info)) ret = -EFAULT; } } else { ret = -EAGAIN; if (timeout) ret = -EINTR; } return ret; }
/* * Note that `init' is a special process: it doesn't get signals it doesn't want to * handle. Thus you cannot kill init even with a SIGKILL even by mistake. */ long ia64_do_signal (sigset_t *oldset, struct sigscratch *scr, long in_syscall) { struct signal_struct *sig; struct k_sigaction *ka; siginfo_t info; long restart = in_syscall; long errno = scr->pt.r8; /* * In the ia64_leave_kernel code path, we want the common case to go fast, which * is why we may in certain cases get here from kernel mode. Just return without * doing anything if so. */ if (!user_mode(&scr->pt)) return 0; if (!oldset) oldset = ¤t->blocked; #ifdef CONFIG_IA32_SUPPORT if (IS_IA32_PROCESS(&scr->pt)) { if (in_syscall) { if (errno >= 0) restart = 0; else errno = -errno; } } else #endif if (scr->pt.r10 != -1) { /* * A system calls has to be restarted only if one of the error codes * ERESTARTNOHAND, ERESTARTSYS, or ERESTARTNOINTR is returned. If r10 * isn't -1 then r8 doesn't hold an error code and we don't need to * restart the syscall, so we can clear the "restart" flag here. */ restart = 0; } for (;;) { unsigned long signr; spin_lock_irq(¤t->sigmask_lock); signr = dequeue_signal(¤t->blocked, &info); spin_unlock_irq(¤t->sigmask_lock); if (!signr) break; if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) { /* Let the debugger run. */ current->exit_code = signr; current->thread.siginfo = &info; current->state = TASK_STOPPED; notify_parent(current, SIGCHLD); schedule(); signr = current->exit_code; current->thread.siginfo = 0; /* We're back. Did the debugger cancel the sig? */ if (!signr) continue; current->exit_code = 0; /* The debugger continued. Ignore SIGSTOP. */ if (signr == SIGSTOP) continue; /* Update the siginfo structure. Is this good? */ if (signr != info.si_signo) { info.si_signo = signr; info.si_errno = 0; info.si_code = SI_USER; info.si_pid = current->p_pptr->pid; info.si_uid = current->p_pptr->uid; } /* If the (new) signal is now blocked, requeue it. */ if (sigismember(¤t->blocked, signr)) { send_sig_info(signr, &info, current); continue; } } ka = ¤t->sig->action[signr - 1]; if (ka->sa.sa_handler == SIG_IGN) { if (signr != SIGCHLD) continue; /* Check for SIGCHLD: it's special. */ while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0) /* nothing */; continue; } if (ka->sa.sa_handler == SIG_DFL) { int exit_code = signr; /* Init gets no signals it doesn't want. */ if (current->pid == 1) continue; switch (signr) { case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG: continue; case SIGTSTP: case SIGTTIN: case SIGTTOU: if (is_orphaned_pgrp(current->pgrp)) continue; /* FALLTHRU */ case SIGSTOP: current->state = TASK_STOPPED; current->exit_code = signr; sig = current->p_pptr->sig; if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP)) notify_parent(current, SIGCHLD); schedule(); continue; case SIGQUIT: case SIGILL: case SIGTRAP: case SIGABRT: case SIGFPE: case SIGSEGV: case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ: if (do_coredump(signr, &scr->pt)) exit_code |= 0x80; /* FALLTHRU */ default: sig_exit(signr, exit_code, &info); /* NOTREACHED */ } } if (restart) { switch (errno) { case ERESTARTSYS: if ((ka->sa.sa_flags & SA_RESTART) == 0) { case ERESTARTNOHAND: #ifdef CONFIG_IA32_SUPPORT if (IS_IA32_PROCESS(&scr->pt)) scr->pt.r8 = -EINTR; else #endif scr->pt.r8 = EINTR; /* note: scr->pt.r10 is already -1 */ break; } case ERESTARTNOINTR: #ifdef CONFIG_IA32_SUPPORT if (IS_IA32_PROCESS(&scr->pt)) { scr->pt.r8 = scr->pt.r1; scr->pt.cr_iip -= 2; } else #endif ia64_decrement_ip(&scr->pt); } } /* Whee! Actually deliver the signal. If the delivery failed, we need to continue to iterate in this loop so we can deliver the SIGSEGV... */ if (handle_signal(signr, ka, &info, oldset, scr)) return 1; } /* Did we come from a system call? */ if (restart) { /* Restart the system call - no handlers present */ if (errno == ERESTARTNOHAND || errno == ERESTARTSYS || errno == ERESTARTNOINTR) { #ifdef CONFIG_IA32_SUPPORT if (IS_IA32_PROCESS(&scr->pt)) { scr->pt.r8 = scr->pt.r1; scr->pt.cr_iip -= 2; } else #endif /* * Note: the syscall number is in r15 which is * saved in pt_regs so all we need to do here * is adjust ip so that the "break" * instruction gets re-executed. */ ia64_decrement_ip(&scr->pt); } } return 0; }
static int jffs2_garbage_collect_thread(void *_c) { struct jffs2_sb_info *c = _c; daemonize(); current->tty = NULL; c->gc_task = current; up(&c->gc_thread_start); sprintf(current->comm, "jffs2_gcd_mtd%d", c->mtd->index); /* FIXME in the 2.2 backport */ current->nice = 10; for (;;) { spin_lock_irq(¤t->sigmask_lock); siginitsetinv (¤t->blocked, sigmask(SIGHUP) | sigmask(SIGKILL) | sigmask(SIGSTOP) | sigmask(SIGCONT)); recalc_sigpending(current); spin_unlock_irq(¤t->sigmask_lock); if (!thread_should_wake(c)) { set_current_state (TASK_INTERRUPTIBLE); D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread sleeping...\n")); } if (current->need_resched) schedule(); /* Put_super will send a SIGKILL and then wait on the sem. */ while (signal_pending(current)) { siginfo_t info; unsigned long signr; spin_lock_irq(¤t->sigmask_lock); signr = dequeue_signal(¤t->blocked, &info); spin_unlock_irq(¤t->sigmask_lock); switch(signr) { case SIGSTOP: D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): SIGSTOP received.\n")); set_current_state(TASK_STOPPED); schedule(); break; case SIGKILL: D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): SIGKILL received.\n")); spin_lock_bh(&c->erase_completion_lock); c->gc_task = NULL; spin_unlock_bh(&c->erase_completion_lock); complete_and_exit(&c->gc_thread_exit, 0); case SIGHUP: D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): SIGHUP received.\n")); break; default: D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): signal %ld received\n", signr)); } } /* We don't want SIGHUP to interrupt us. STOP and KILL are OK though. */ spin_lock_irq(¤t->sigmask_lock); siginitsetinv (¤t->blocked, sigmask(SIGKILL) | sigmask(SIGSTOP) | sigmask(SIGCONT)); recalc_sigpending(current); spin_unlock_irq(¤t->sigmask_lock); D1(printk(KERN_DEBUG "jffs2_garbage_collect_thread(): pass\n")); jffs2_garbage_collect_pass(c); } }
static int get_signal_to_deliver(siginfo_t *info, struct pt_regs *regs) { for (;;) { unsigned long signr; struct k_sigaction *ka; spin_lock_irq(¤t->sigmask_lock); signr = dequeue_signal(¤t->blocked, info); spin_unlock_irq(¤t->sigmask_lock); if (!signr) break; if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) { /* Let the debugger run. */ current->exit_code = signr; current->state = TASK_STOPPED; notify_parent(current, SIGCHLD); schedule(); /* We're back. Did the debugger cancel the sig? */ signr = current->exit_code; if (signr == 0) continue; current->exit_code = 0; /* The debugger continued. Ignore SIGSTOP. */ if (signr == SIGSTOP) continue; /* Update the siginfo structure. Is this good? */ if (signr != info->si_signo) { info->si_signo = signr; info->si_errno = 0; info->si_code = SI_USER; info->si_pid = current->p_pptr->pid; info->si_uid = current->p_pptr->uid; } /* If the (new) signal is now blocked, requeue it. */ if (sigismember(¤t->blocked, signr)) { send_sig_info(signr, info, current); continue; } } ka = ¤t->sig->action[signr-1]; if (ka->sa.sa_handler == SIG_IGN) { if (signr != SIGCHLD) continue; /* Check for SIGCHLD: it's special. */ while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0) /* nothing */; continue; } if (ka->sa.sa_handler == SIG_DFL) { int exit_code = signr; /* Init gets no signals it doesn't want. */ if (current->pid == 1) continue; switch (signr) { case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG: continue; case SIGTSTP: case SIGTTIN: case SIGTTOU: if (is_orphaned_pgrp(current->pgrp)) continue; /* FALLTHRU */ case SIGSTOP: { struct signal_struct *sig; current->state = TASK_STOPPED; current->exit_code = signr; sig = current->p_pptr->sig; if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP)) notify_parent(current, SIGCHLD); schedule(); continue; } case SIGQUIT: case SIGILL: case SIGTRAP: case SIGABRT: case SIGFPE: case SIGSEGV: case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ: if (do_coredump(signr, regs)) exit_code |= 0x80; /* FALLTHRU */ default: sig_exit(signr, exit_code, info); /* NOTREACHED */ } } return signr; } return 0; }
int do_signal(struct pt_regs *regs, sigset_t *oldset) { siginfo_t info; struct k_sigaction *ka; /* * We want the common case to go fast, which * is why we may in certain cases get here from * kernel mode. Just return without doing anything * if so. */ if ((regs->xcs & 3) != 3) return 1; if (!oldset) oldset = ¤t->blocked; for (;;) { unsigned long signr; spin_lock_irq(¤t->sigmask_lock); signr = dequeue_signal(¤t->blocked, &info); spin_unlock_irq(¤t->sigmask_lock); if (!signr) break; /* We should probably find a better way to do this. */ if(ssmunch_multi) { int i; /* Here's a hack. If we get a signal that's not * one of the signals sent by ssmunch, then * we won't print a message, since the ssmunch'd * process is probably dead or mostly dead. * Mostly dead is not quite the same as dead; for more * information on this topic please see Miracle Max. */ for(i = 0; i < 32; i++) { if(ssmunch_multi&(1<<i)) break; } if(i == 32) goto no_ssmunch; /* HAHA! ^^^^ I used a goto! Now I'm a real * kernel h4x0r! */ printk("do_signal: multiple signals: "); for(i = 0; i < 32; i++) { if(ssmunch_multi&(1<<i)) printk("%d ", i); } printk("\n"); no_ssmunch: ssmunch_multi = 0; } if ((current->flags & PF_PTRACED) && signr != SIGKILL) { /* Let the debugger run. */ current->exit_code = signr; current->state = TASK_STOPPED; notify_parent(current, SIGCHLD); schedule(); /* We're back. Did the debugger cancel the sig? */ if (!(signr = current->exit_code)) continue; current->exit_code = 0; /* The debugger continued. Ignore SIGSTOP. */ if (signr == SIGSTOP) continue; /* Update the siginfo structure. Is this good? */ if (signr != info.si_signo) { info.si_signo = signr; info.si_errno = 0; info.si_code = SI_USER; info.si_pid = current->p_pptr->pid; info.si_uid = current->p_pptr->uid; } /* If the (new) signal is now blocked, requeue it. */ if (sigismember(¤t->blocked, signr)) { send_sig_info(signr, &info, current); continue; } } ka = ¤t->sig->action[signr-1]; if (ka->sa.sa_handler == SIG_IGN) { if (signr != SIGCHLD) continue; /* Check for SIGCHLD: it's special. */ while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0) /* nothing */; continue; } if (ka->sa.sa_handler == SIG_DFL) { int exit_code = signr; /* Init gets no signals it doesn't want. */ if (current->pid == 1) continue; switch (signr) { case SIGCONT: case SIGCHLD: case SIGWINCH: continue; case SIGTSTP: case SIGTTIN: case SIGTTOU: if (is_orphaned_pgrp(current->pgrp)) continue; /* FALLTHRU */ case SIGSTOP: current->state = TASK_STOPPED; current->exit_code = signr; if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP)) notify_parent(current, SIGCHLD); schedule(); continue; case SIGQUIT: case SIGILL: case SIGTRAP: case SIGABRT: case SIGFPE: case SIGSEGV: lock_kernel(); if (current->binfmt && current->binfmt->core_dump && current->binfmt->core_dump(signr, regs)) exit_code |= 0x80; unlock_kernel(); /* FALLTHRU */ default: lock_kernel(); sigaddset(¤t->signal, signr); recalc_sigpending(current); current->flags |= PF_SIGNALED; /* printk("do_signal: do_exit with %d\n", exit_code); */ do_exit(exit_code); /* NOTREACHED */ } } /* Whee! Actually deliver the signal. */ /* printk("do_signal: handle_signal with %d\n", signr); */ handle_signal(signr, ka, &info, oldset, regs); return 1; } /* Did we come from a system call? */ if (regs->orig_eax >= 0) { /* Restart the system call - no handlers present */ if (regs->eax == -ERESTARTNOHAND || regs->eax == -ERESTARTSYS || regs->eax == -ERESTARTNOINTR) { regs->eax = regs->orig_eax; regs->eip -= 2; } } return 0; }
asmlinkage int do_irix_signal(sigset_t *oldset, struct pt_regs *regs) { struct k_sigaction *ka; siginfo_t info; if (!oldset) oldset = ¤t->blocked; for (;;) { unsigned long signr; spin_lock_irq(¤t->sigmask_lock); signr = dequeue_signal(¤t->blocked, &info); spin_unlock_irq(¤t->sigmask_lock); if (!signr) break; if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) { /* Let the debugger run. */ current->exit_code = signr; current->state = TASK_STOPPED; notify_parent(current, SIGCHLD); schedule(); /* We're back. Did the debugger cancel the sig? */ if (!(signr = current->exit_code)) continue; current->exit_code = 0; /* The debugger continued. Ignore SIGSTOP. */ if (signr == SIGSTOP) continue; /* Update the siginfo structure. Is this good? */ if (signr != info.si_signo) { info.si_signo = signr; info.si_errno = 0; info.si_code = SI_USER; info.si_pid = current->p_pptr->pid; info.si_uid = current->p_pptr->uid; } /* If the (new) signal is now blocked, requeue it. */ if (sigismember(¤t->blocked, signr)) { send_sig_info(signr, &info, current); continue; } } ka = ¤t->sig->action[signr-1]; if (ka->sa.sa_handler == SIG_IGN) { if (signr != SIGCHLD) continue; /* Check for SIGCHLD: it's special. */ while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0) /* nothing */; continue; } if (ka->sa.sa_handler == SIG_DFL) { int exit_code = signr; /* Init gets no signals it doesn't want. */ if (current->pid == 1) continue; switch (signr) { case SIGCONT: case SIGCHLD: case SIGWINCH: continue; case SIGTSTP: case SIGTTIN: case SIGTTOU: if (is_orphaned_pgrp(current->pgrp)) continue; /* FALLTHRU */ case SIGSTOP: current->state = TASK_STOPPED; current->exit_code = signr; if (!(current->p_pptr->sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP)) notify_parent(current, SIGCHLD); schedule(); continue; case SIGQUIT: case SIGILL: case SIGTRAP: case SIGABRT: case SIGFPE: case SIGSEGV: if (do_coredump(signr, regs)) exit_code |= 0x80; /* FALLTHRU */ default: sigaddset(¤t->pending.signal, signr); recalc_sigpending(current); current->flags |= PF_SIGNALED; do_exit(exit_code); /* NOTREACHED */ } } if (regs->regs[0]) syscall_restart(regs, ka); /* Whee! Actually deliver the signal. */ handle_signal(signr, ka, &info, oldset, regs); return 1; } /* * Who's code doesn't conform to the restartable syscall convention * dies here!!! The li instruction, a single machine instruction, * must directly be followed by the syscall instruction. */ if (regs->regs[0]) { if (regs->regs[2] == ERESTARTNOHAND || regs->regs[2] == ERESTARTSYS || regs->regs[2] == ERESTARTNOINTR) { regs->cp0_epc -= 8; } } return 0; }
/* * Note that 'init' is a special process: it doesn't get signals it doesn't * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. * * Note that we go through the signals twice: once to check the signals that * the kernel can handle, and then we build all the user-level signal handling * stack-frames in one go after that. */ asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs, int syscall) { struct k_sigaction *ka; siginfo_t info; int single_stepping; /* * We want the common case to go fast, which * is why we may in certain cases get here from * kernel mode. Just return without doing anything * if so. */ if (!user_mode(regs)) return 0; if (!oldset) oldset = ¤t->blocked; single_stepping = ptrace_cancel_bpt(current); for (;;) { unsigned long signr; spin_lock_irq (¤t->sigmask_lock); signr = dequeue_signal(¤t->blocked, &info); spin_unlock_irq (¤t->sigmask_lock); if (!signr) break; if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) { /* Let the debugger run. */ current->exit_code = signr; current->state = TASK_STOPPED; notify_parent(current, SIGCHLD); schedule(); single_stepping |= ptrace_cancel_bpt(current); /* We're back. Did the debugger cancel the sig? */ if (!(signr = current->exit_code)) continue; current->exit_code = 0; /* The debugger continued. Ignore SIGSTOP. */ if (signr == SIGSTOP) continue; /* Update the siginfo structure. Is this good? */ if (signr != info.si_signo) { info.si_signo = signr; info.si_errno = 0; info.si_code = SI_USER; info.si_pid = current->p_pptr->pid; info.si_uid = current->p_pptr->uid; } /* If the (new) signal is now blocked, requeue it. */ if (sigismember(¤t->blocked, signr)) { send_sig_info(signr, &info, current); continue; } } ka = ¤t->sig->action[signr-1]; if (ka->sa.sa_handler == SIG_IGN) { if (signr != SIGCHLD) continue; /* Check for SIGCHLD: it's special. */ while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0) /* nothing */; continue; } if (ka->sa.sa_handler == SIG_DFL) { int exit_code = signr; /* Init gets no signals it doesn't want. */ if (current->pid == 1) continue; switch (signr) { case SIGCONT: case SIGCHLD: case SIGWINCH: case SIGURG: continue; case SIGTSTP: case SIGTTIN: case SIGTTOU: if (is_orphaned_pgrp(current->pgrp)) continue; /* FALLTHRU */ case SIGSTOP: { struct signal_struct *sig; current->state = TASK_STOPPED; current->exit_code = signr; sig = current->p_pptr->sig; if (sig && !(sig->action[SIGCHLD-1].sa.sa_flags & SA_NOCLDSTOP)) notify_parent(current, SIGCHLD); schedule(); single_stepping |= ptrace_cancel_bpt(current); continue; } case SIGQUIT: case SIGILL: case SIGTRAP: case SIGABRT: case SIGFPE: case SIGSEGV: case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ: if (do_coredump(signr, regs)) exit_code |= 0x80; /* FALLTHRU */ default: sig_exit(signr, exit_code, &info); /* NOTREACHED */ } } /* Are we from a system call? */ if (syscall) { switch (regs->ARM_r0) { case -ERESTARTNOHAND: regs->ARM_r0 = -EINTR; break; case -ERESTARTSYS: if (!(ka->sa.sa_flags & SA_RESTART)) { regs->ARM_r0 = -EINTR; break; } /* fallthrough */ case -ERESTARTNOINTR: restart_syscall(regs); break; } } /* Whee! Actually deliver the signal. */ handle_signal(signr, ka, &info, oldset, regs); if (single_stepping) ptrace_set_bpt(current); return 1; } if (syscall && (regs->ARM_r0 == -ERESTARTNOHAND || regs->ARM_r0 == -ERESTARTSYS || regs->ARM_r0 == -ERESTARTNOINTR)) { restart_syscall(regs); } if (single_stepping) ptrace_set_bpt(current); return 0; }
/* * This task waits until at least one touchscreen is touched. It then loops * digitizing and generating events until no touchscreens are being touched. */ static int xts_thread(void *arg) { int any_pens_down; struct xts_dev *dev; struct task_struct *tsk = current; DECLARE_WAITQUEUE(wait, tsk); xts_task = tsk; daemonize(); reparent_to_init(); strcpy(xts_task->comm, XTS_NAME); xts_task->tty = NULL; /* only want to receive SIGKILL */ spin_lock_irq(&xts_task->sigmask_lock); siginitsetinv(&xts_task->blocked, sigmask(SIGKILL)); recalc_sigpending(xts_task); spin_unlock_irq(&xts_task->sigmask_lock); complete(&task_sync); add_wait_queue(&irq_wait, &wait); any_pens_down = 0; for (;;) { /* * Block waiting for interrupt or if any pens are down, either * an interrupt or timeout to sample again. */ set_current_state(TASK_INTERRUPTIBLE); if (any_pens_down) schedule_timeout(HZ / 100); while (signal_pending(tsk)) { siginfo_t info; /* Only honor the signal if we're cleaning up */ if (task_shutdown) goto exit; /* * Someone else sent us a kill (probably the * shutdown scripts "Sending all processes the * KILL signal"). Just dequeue it and ignore * it. */ spin_lock_irq(¤t->sigmask_lock); (void)dequeue_signal(¤t->blocked, &info); spin_unlock_irq(¤t->sigmask_lock); } schedule(); any_pens_down = 0; for (dev = dev_list; dev; dev = dev->next_dev) { if (dev->pen_is_down) { u32 x, y; XTouchscreen_GetPosition_2D(&dev->Touchscreen, &x, &y); event_add(dev, 255, (u16) x, (u16) y); dev->pen_was_down = 1; any_pens_down = 1; } else if (dev->pen_was_down) { event_add(dev, 0, 0, 0); dev->pen_was_down = 0; } } } exit: remove_wait_queue(&irq_wait, &wait); xts_task = NULL; complete_and_exit(&task_sync, 0); }
/* * Note that 'init' is a special process: it doesn't get signals it doesn't * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. * * Note that we go through the signals twice: once to check the signals that * the kernel can handle, and then we build all the user-level signal handling * stack-frames in one go after that. * * "r0" and "r19" are the registers we need to restore for system call * restart. "r0" is also used as an indicator whether we can restart at * all (if we get here from anything but a syscall return, it will be 0) */ asmlinkage int do_signal(sigset_t *oldset, struct pt_regs * regs, struct switch_stack * sw, unsigned long r0, unsigned long r19) { unsigned long single_stepping = ptrace_cancel_bpt(current); if (!oldset) oldset = ¤t->blocked; while (1) { unsigned long signr; struct k_sigaction *ka; siginfo_t info; spin_lock_irq(¤t->sigmask_lock); signr = dequeue_signal(¤t->blocked, &info); spin_unlock_irq(¤t->sigmask_lock); if (!signr) break; if ((current->ptrace & PT_PTRACED) && signr != SIGKILL) { /* Let the debugger run. */ current->exit_code = signr; current->state = TASK_STOPPED; notify_parent(current, SIGCHLD); schedule(); single_stepping |= ptrace_cancel_bpt(current); /* We're back. Did the debugger cancel the sig? */ if (!(signr = current->exit_code)) continue; current->exit_code = 0; /* The debugger continued. Ignore SIGSTOP. */ if (signr == SIGSTOP) continue; /* Update the siginfo structure. Is this good? */ if (signr != info.si_signo) { info.si_signo = signr; info.si_errno = 0; info.si_code = SI_USER; info.si_pid = current->p_pptr->pid; info.si_uid = current->p_pptr->uid; } /* If the (new) signal is now blocked, requeue it. */ if (sigismember(¤t->blocked, signr)) { send_sig_info(signr, &info, current); continue; } } ka = ¤t->sig->action[signr-1]; if (ka->sa.sa_handler == SIG_IGN) { if (signr != SIGCHLD) continue; /* Check for SIGCHLD: it's special. */ while (sys_wait4(-1, NULL, WNOHANG, NULL) > 0) /* nothing */; continue; } if (ka->sa.sa_handler == SIG_DFL) { int exit_code = signr & 0x7f; /* Init gets no signals it doesn't want. */ if (current->pid == 1) continue; switch (signr) { case SIGCONT: case SIGCHLD: case SIGWINCH: continue; case SIGTSTP: case SIGTTIN: case SIGTTOU: if (is_orphaned_pgrp(current->pgrp)) continue; /* FALLTHRU */ case SIGSTOP: current->state = TASK_STOPPED; current->exit_code = signr; if (!(current->p_pptr->sig->action[SIGCHLD-1] .sa.sa_flags & SA_NOCLDSTOP)) notify_parent(current, SIGCHLD); schedule(); single_stepping |= ptrace_cancel_bpt(current); continue; case SIGQUIT: case SIGILL: case SIGTRAP: case SIGABRT: case SIGFPE: case SIGSEGV: case SIGBUS: case SIGSYS: case SIGXCPU: case SIGXFSZ: if (do_coredump(signr, regs)) exit_code |= 0x80; /* FALLTHRU */ default: lock_kernel(); sigaddset(¤t->pending.signal, signr); current->flags |= PF_SIGNALED; do_exit(exit_code); /* NOTREACHED */ } continue; } /* Whee! Actually deliver the signal. */ if (r0) syscall_restart(r0, r19, regs, ka); handle_signal(signr, ka, &info, oldset, regs, sw); if (single_stepping) ptrace_set_bpt(current); /* re-set bpt */ return 1; } if (r0 && (regs->r0 == ERESTARTNOHAND || regs->r0 == ERESTARTSYS || regs->r0 == ERESTARTNOINTR)) { regs->r0 = r0; /* reset v0 and a3 and replay syscall */ regs->r19 = r19; regs->pc -= 4; } if (single_stepping) ptrace_set_bpt(current); /* re-set breakpoint */ return 0; }