/*
* Load a Dalvik register into a physical register. Take care when
* using this routine, as it doesn't perform any bookkeeping regarding
* register liveness. That is the responsibility of the caller.
*/
static void loadValueDirect(CompilationUnit *cUnit, RegLocation rlSrc,
int reg1)
{
rlSrc = dvmCompilerUpdateLoc(cUnit, rlSrc);
if (rlSrc.location == kLocPhysReg) {
genRegCopy(cUnit, reg1, rlSrc.lowReg);
} else if (rlSrc.location == kLocRetval) {
loadWordDisp(cUnit, rGLUE, offsetof(InterpState, retval), reg1);
} else {
assert(rlSrc.location == kLocDalvikFrame);
loadWordDisp(cUnit, rFP, dvmCompilerS2VReg(cUnit, rlSrc.sRegLow) << 2,
reg1);
}
}
static void storeValue(CompilationUnit *cUnit, RegLocation rlDest,
RegLocation rlSrc)
{
LIR *defStart;
LIR *defEnd;
assert(!rlDest.wide);
assert(!rlSrc.wide);
dvmCompilerKillNullCheckedLoc(cUnit, rlDest);
rlSrc = dvmCompilerUpdateLoc(cUnit, rlSrc);
rlDest = dvmCompilerUpdateLoc(cUnit, rlDest);
if (rlSrc.location == kLocPhysReg) {
if (dvmCompilerIsLive(cUnit, rlSrc.lowReg) ||
(rlDest.location == kLocPhysReg)) {
// Src is live or Dest has assigned reg.
rlDest = dvmCompilerEvalLoc(cUnit, rlDest, kAnyReg, false);
genRegCopy(cUnit, rlDest.lowReg, rlSrc.lowReg);
} else {
// Just re-assign the registers. Dest gets Src's regs
rlDest.lowReg = rlSrc.lowReg;
dvmCompilerClobber(cUnit, rlSrc.lowReg);
}
} else {
// Load Src either into promoted Dest or temps allocated for Dest
rlDest = dvmCompilerEvalLoc(cUnit, rlDest, kAnyReg, false);
loadValueDirect(cUnit, rlSrc, rlDest.lowReg);
}
// Dest is now live and dirty (until/if we flush it to home location)
dvmCompilerMarkLive(cUnit, rlDest.lowReg, rlDest.sRegLow);
dvmCompilerMarkDirty(cUnit, rlDest.lowReg);
if (rlDest.location == kLocRetval) {
storeBaseDisp(cUnit, rGLUE, offsetof(InterpState, retval),
rlDest.lowReg, kWord);
dvmCompilerClobber(cUnit, rlDest.lowReg);
} else {
dvmCompilerResetDefLoc(cUnit, rlDest);
if (dvmCompilerLiveOut(cUnit, rlDest.sRegLow)) {
defStart = (LIR *)cUnit->lastLIRInsn;
int vReg = dvmCompilerS2VReg(cUnit, rlDest.sRegLow);
storeBaseDisp(cUnit, rFP, vReg << 2, rlDest.lowReg, kWord);
dvmCompilerMarkClean(cUnit, rlDest.lowReg);
defEnd = (LIR *)cUnit->lastLIRInsn;
dvmCompilerMarkDef(cUnit, rlDest, defStart, defEnd);
}
}
}
/*
* Load a Dalvik register pair into a physical register[s]. Take care when
* using this routine, as it doesn't perform any bookkeeping regarding
* register liveness. That is the responsibility of the caller.
*/
static void loadValueDirectWide(CompilationUnit *cUnit, RegLocation rlSrc,
int regLo, int regHi)
{
rlSrc = dvmCompilerUpdateLocWide(cUnit, rlSrc);
if (rlSrc.location == kLocPhysReg) {
genRegCopyWide(cUnit, regLo, regHi, rlSrc.lowReg, rlSrc.highReg);
} else if (rlSrc.location == kLocRetval) {
loadBaseDispWide(cUnit, NULL, rGLUE, 8,
regLo, regHi, INVALID_SREG);
} else {
assert(rlSrc.location == kLocDalvikFrame);
loadBaseDispWide(cUnit, NULL, rFP,
dvmCompilerS2VReg(cUnit, rlSrc.sRegLow) << 2,
regLo, regHi, INVALID_SREG);
}
}
/*
* Take the address of a Dalvik register and store it into rDest.
* Clobber any live values associated either with the Dalvik value
* or the target register and lock the target fixed register.
*/
static void loadValueAddressDirect(CompilationUnit *cUnit, RegLocation rlSrc,
int rDest)
{
rlSrc = rlSrc.wide ? dvmCompilerUpdateLocWide(cUnit, rlSrc) :
dvmCompilerUpdateLoc(cUnit, rlSrc);
if (rlSrc.location == kLocPhysReg) {
if (rlSrc.wide) {
dvmCompilerFlushRegWideForV5TEVFP(cUnit, rlSrc.lowReg,
rlSrc.highReg);
} else {
dvmCompilerFlushRegForV5TEVFP(cUnit, rlSrc.lowReg);
}
}
dvmCompilerClobber(cUnit, rDest);
dvmCompilerLockTemp(cUnit, rDest);
opRegRegImm(cUnit, kOpAdd, rDest, rFP,
dvmCompilerS2VReg(cUnit, rlSrc.sRegLow) << 2);
}
static void storeValue(CompilationUnit *cUnit, RegLocation rlDest, RegLocation rlSrc)
{
LOG("rlDest.location is %d\nrlSrc.location is %d\n", rlDest.location, rlSrc.location);
LIR *defStart;
LIR *defEnd;
assert(!rlDest.wide);
assert(!rlSrc.wide);
//eric
//dvmCompilerKillNullCheckedLoc(cUnit, rlDest);
rlSrc = dvmCompilerUpdateLoc(cUnit, rlSrc);
//eric:if the register is DalvikFrame, so change it to physical
rlDest = dvmCompilerUpdateLoc(cUnit, rlDest);
LOG(">>>>>>>>>>>>>sRegLow is %d<<<<<<<<<<<<\n", rlDest.sRegLow);
if (rlSrc.location == kLocPhysReg) {
LOG(">>>>>>>>>>>>>>>The function is %s<<<<<<<<<<<<<<<<<\n", __func__);
LOG(">>>>>>>>>>>>>>>the Src reg is phy<<<<<<<<<<<<<<<<<\n");
if (dvmCompilerIsLive(cUnit, rlSrc.lowReg) || (rlDest.location == kLocPhysReg)) {
// Src is live or Dest has assigned reg.
rlDest = dvmCompilerEvalLoc(cUnit, rlDest, kAnyReg, false);
genRegCopy(cUnit, rlDest.lowReg, rlSrc.lowReg);
} else {
// Just re-assign the registers. Dest gets Src's regs
rlDest.lowReg = rlSrc.lowReg;
dvmCompilerClobber(cUnit, rlSrc.lowReg);
}
} else {
LOG(">>>>>>>>>>>>>>>The function is %s<<<<<<<<<<<<<<<<<\n", __func__);
LOG("the Src reg is not phy\n");
// Load Src either into promoted Dest or temps allocated for Dest
rlDest = dvmCompilerEvalLoc(cUnit, rlDest, kAnyReg, false);
loadValueDirect(cUnit, rlSrc, rlDest.lowReg);
}
LOG(">>>>>>>>>>>>>sRegLow is %d<<<<<<<<<<<<\n", rlDest.sRegLow);
// Dest is now live and dirty (until/if we flush it to home location)
dvmCompilerMarkLive(cUnit, rlDest.lowReg, rlDest.sRegLow);
dvmCompilerMarkDirty(cUnit, rlDest.lowReg);
if (rlDest.location == kLocRetval) {
//eric
//storeBaseDisp(cUnit, rGLUE, offsetof(InterpState, retval), rlDest.lowReg, kWord);
storeBaseDisp(cUnit, rGLUE, 8, rlDest.lowReg, kWord);
dvmCompilerClobber(cUnit, rlDest.lowReg);
} else {
dvmCompilerResetDefLoc(cUnit, rlDest);
//if (dvmCompilerLiveOut(cUnit, rlDest.sRegLow)) {
if (true) {
//eric
// defStart = (LIR *)cUnit->lastLIRInsn;
LOG(">>>>>>>>>>>>>sRegLow is %d<<<<<<<<<<<<\n", rlDest.sRegLow);
int vReg = dvmCompilerS2VReg(cUnit, rlDest.sRegLow);
LOG(">>>>>>>>>>>>>vReg is v%d<<<<<<<<<<<<<\n", vReg);
storeBaseDisp(cUnit, rFP, vReg << 2, rlDest.lowReg, kWord);
// storeBaseDisp(cUnit, rFP, 20, rlDest.lowReg, kWord);
dvmCompilerMarkClean(cUnit, rlDest.lowReg);
// defEnd = (LIR *)cUnit->lastLIRInsn;
// dvmCompilerMarkDef(cUnit, rlDest, defStart, defEnd);
}
}
}