/*
handle a MISSION_REQUEST mavlink packet
*/
void GCS_MAVLINK::handle_mission_request(AP_Mission &mission, mavlink_message_t *msg)
{
AP_Mission::Mission_Command cmd;
// decode
mavlink_mission_request_t packet;
mavlink_msg_mission_request_decode(msg, &packet);
// exit immediately if this command is not meant for this vehicle
if (mavlink_check_target(packet.target_system, packet.target_component)) {
return;
}
// retrieve mission from eeprom
if (!mission.read_cmd_from_storage(packet.seq, cmd)) {
goto mission_item_send_failed;
}
// convert mission command to mavlink mission item packet
mavlink_mission_item_t ret_packet;
memset(&ret_packet, 0, sizeof(ret_packet));
if (!AP_Mission::mission_cmd_to_mavlink(cmd, ret_packet)) {
goto mission_item_send_failed;
}
// set packet's current field to 1 if this is the command being executed
if (cmd.id == (uint16_t)mission.get_current_nav_cmd().index) {
ret_packet.current = 1;
} else {
ret_packet.current = 0;
}
// set auto continue to 1
ret_packet.autocontinue = 1; // 1 (true), 0 (false)
/*
avoid the _send() function to save memory on APM2, as it avoids
the stack usage of the _send() function by using the already
declared ret_packet above
*/
ret_packet.target_system = msg->sysid;
ret_packet.target_component = msg->compid;
ret_packet.seq = packet.seq;
ret_packet.command = cmd.id;
_mav_finalize_message_chan_send(chan,
MAVLINK_MSG_ID_MISSION_ITEM,
(const char *)&ret_packet,
MAVLINK_MSG_ID_MISSION_ITEM_LEN,
MAVLINK_MSG_ID_MISSION_ITEM_CRC);
return;
mission_item_send_failed:
// send failure message
mavlink_msg_mission_ack_send(chan, msg->sysid, msg->compid, MAV_MISSION_ERROR);
}
void
MavlinkMissionManager::handle_mission_request(const mavlink_message_t *msg)
{
mavlink_mission_request_t wpr;
mavlink_msg_mission_request_decode(msg, &wpr);
if (CHECK_SYSID_COMPID_MISSION(wpr)) {
if (msg->sysid == _transfer_partner_sysid && msg->compid == _transfer_partner_compid) {
if (_state == MAVLINK_WPM_STATE_SENDLIST) {
_time_last_recv = hrt_absolute_time();
/* _transfer_seq contains sequence of expected request */
if (wpr.seq == _transfer_seq && _transfer_seq < _transfer_count) {
if (_verbose) { warnx("WPM: MISSION_ITEM_REQUEST seq %u from ID %u", wpr.seq, msg->sysid); }
_transfer_seq++;
} else if (wpr.seq == _transfer_seq - 1) {
if (_verbose) { warnx("WPM: MISSION_ITEM_REQUEST seq %u from ID %u (again)", wpr.seq, msg->sysid); }
} else {
if (_transfer_seq > 0 && _transfer_seq < _transfer_count) {
if (_verbose) { warnx("WPM: MISSION_ITEM_REQUEST ERROR: seq %u from ID %u unexpected, must be %i or %i", wpr.seq, msg->sysid, _transfer_seq - 1, _transfer_seq); }
} else if (_transfer_seq <= 0) {
if (_verbose) { warnx("WPM: MISSION_ITEM_REQUEST ERROR: seq %u from ID %u unexpected, must be %i", wpr.seq, msg->sysid, _transfer_seq); }
} else {
if (_verbose) { warnx("WPM: MISSION_ITEM_REQUEST ERROR: seq %u from ID %u unexpected, must be %i", wpr.seq, msg->sysid, _transfer_seq - 1); }
}
_state = MAVLINK_WPM_STATE_IDLE;
send_mission_ack(_transfer_partner_sysid, _transfer_partner_compid, MAV_MISSION_ERROR);
_mavlink->send_statustext_critical("WPM: REJ. CMD: Req. WP was unexpected");
return;
}
/* double check bounds in case of items count changed */
if (wpr.seq < _count) {
send_mission_item(_transfer_partner_sysid, _transfer_partner_compid, wpr.seq);
} else {
if (_verbose) { warnx("WPM: MISSION_ITEM_REQUEST ERROR: seq %u out of bound [%u, %u]", (unsigned)wpr.seq, (unsigned)wpr.seq, (unsigned)_count - 1); }
_state = MAVLINK_WPM_STATE_IDLE;
send_mission_ack(_transfer_partner_sysid, _transfer_partner_compid, MAV_MISSION_ERROR);
_mavlink->send_statustext_critical("WPM: REJ. CMD: Req. WP was unexpected");
}
} else if (_state == MAVLINK_WPM_STATE_IDLE) {
if (_verbose) { warnx("WPM: MISSION_ITEM_REQUEST ERROR: no transfer"); }
_mavlink->send_statustext_critical("IGN MISSION_ITEM_REQUEST: No active transfer");
} else {
if (_verbose) { warnx("WPM: MISSION_ITEM_REQUEST ERROR: busy (state %d).", _state); }
_mavlink->send_statustext_critical("WPM: REJ. CMD: Busy");
}
} else {
_mavlink->send_statustext_critical("WPM: REJ. CMD: partner id mismatch");
if (_verbose) { warnx("WPM: MISSION_ITEM_REQUEST ERROR: rejected, partner ID mismatch"); }
}
}
}
void protDecodeMavlink(void) {
uint8_t indx, writeSuccess, commChannel = 1;
mavlink_param_set_t set;
mavlink_message_t msg;
mavlink_status_t status;
// uint8_t* dataIn;
// fix the data length so if the interrupt adds data
// during execution of this block, it will be read
// until the next gsRead
unsigned int tmpLen = getLength(uartMavlinkInBuffer), i = 0;
// if the buffer has more data than the max size, set it to max,
// otherwise set it to the length
//DatafromGSmavlink[0] = (tmpLen > MAXINLEN) ? MAXINLEN : tmpLen;
// read the data
//for (i = 1; i <= DatafromGSmavlink[0]; i += 1) {
//mavlink_parse_char(commChannel, readFront(uartBufferInMavlink), &msg, &status);
//DatafromGSmavlink[i] = readFront(uartMavlinkInBuffer);
//}
//dataIn = DatafromGSmavlink;
// increment the age of heartbeat
mlPending.heartbeatAge++;
for (i = 0; i <= tmpLen; i++) {
// Try to get a new message
if (mavlink_parse_char(commChannel, readFront(uartMavlinkInBuffer), &msg, &status)) {
// Handle message
switch (msg.msgid) {
case MAVLINK_MSG_ID_HEARTBEAT:
mavlink_msg_heartbeat_decode(&msg, &mlHeartbeat);
// Reset the heartbeat
mlPending.heartbeatAge = 0;
break;
//AM DBG
case MAVLINK_MSG_ID_MISSION_COUNT:
if (!mlPending.wpTransaction && (mlPending.wpProtState == WP_PROT_IDLE)) {
mavlink_msg_mission_count_decode(&msg, &mlWpCount);
// Start the transaction
mlPending.wpTransaction = 1;
// change the state
mlPending.wpProtState = WP_PROT_GETTING_WP_IDLE;
// reset the rest of the state machine
mlPending.wpTotalWps = mlWpCount.count;
mlPending.wpCurrentWpInTransaction = 0;
mlPending.wpTimeOut = 0;
}
break;
case MAVLINK_MSG_ID_MISSION_REQUEST_LIST:
// if there is no transaction going on
if (!mlPending.wpTransaction && (mlPending.wpProtState == WP_PROT_IDLE)) {
// Start the transaction
mlPending.wpTransaction = 1;
// change the state
mlPending.wpProtState = WP_PROT_LIST_REQUESTED;
// reset the rest of the state machine
mlPending.wpCurrentWpInTransaction = 0;
mlPending.wpTimeOut = 0;
}
break;
case MAVLINK_MSG_ID_MISSION_REQUEST:
mavlink_msg_mission_request_decode(&msg, &mlWpRequest);
if (mlPending.wpTransaction && (mlWpRequest.seq < mlWpValues.wpCount)) {
// change the state
mlPending.wpProtState = WP_PROT_TX_WP;
// reset the rest of the state machine
mlPending.wpCurrentWpInTransaction = mlWpRequest.seq;
mlPending.wpTimeOut = 0;
} else {
// TODO: put here a report for a single WP, i.e. not inside a transaction
}
break;
case MAVLINK_MSG_ID_MISSION_ACK:
mavlink_msg_mission_ack_decode(&msg, &mlWpAck);
if (mlPending.wpTransaction) {
// End the transaction
mlPending.wpTransaction = 0;
// change the state
mlPending.wpProtState = WP_PROT_IDLE;
// reset the rest of the state machine
mlPending.wpCurrentWpInTransaction = 0;
mlPending.wpTimeOut = 0;
// send current waypoint index
mlPending.wpSendCurrent = TRUE;
}
break;
case MAVLINK_MSG_ID_MISSION_ITEM:
writeSuccess = SUCCESS;
mavlink_msg_mission_item_decode(&msg, &mlSingleWp);
if (mlPending.wpTransaction && (mlPending.wpProtState == WP_PROT_RX_WP)) {
mlPending.wpProtState = WP_PROT_GETTING_WP_IDLE;
}
indx = (uint8_t) mlSingleWp.seq;
mlWpValues.lat[indx] = mlSingleWp.x;
mlWpValues.lon[indx] = mlSingleWp.y;
mlWpValues.alt[indx] = mlSingleWp.z;
mlWpValues.type[indx] = mlSingleWp.command;
mlWpValues.orbit[indx] = (uint16_t) mlSingleWp.param3;
/*
// Record the data in EEPROM
writeSuccess = storeWaypointInEeprom(&mlSingleWp);
// Set the flag of Aknowledge for the AKN Message
// if the write was not successful
if (writeSuccess != SUCCESS) {
mlPending.wpAck++;
mlWpAck.target_component = MAV_COMP_ID_MISSIONPLANNER;
mlWpAck.type = MAV_MISSION_ERROR;
}
*/
break;
case MAVLINK_MSG_ID_MISSION_CLEAR_ALL:
writeSuccess = SUCCESS;
// clear the WP values in memory;
memset(&mlWpValues, 0, sizeof (mavlink_mission_item_values_t));
/*
writeSuccess = clearWaypointsFrom(0);
// Set the flag of Aknowledge fail
// if the write was unsuccessful
if (writeSuccess != SUCCESS) {
mlPending.statustext++;
mlStatustext.severity = MAV_SEVERITY_ERROR;
strncpy(mlStatustext.text, "Failed to clear waypoints from EEPROM.", 49);
}
*/
// Update the waypoint count
mlWpValues.wpCount = 0;
// Set the state machine ready to send the WP akn
mlPending.wpCurrentWpInTransaction = 0;
mlPending.wpTotalWps = 0;
mlPending.wpTransaction = 1;
mlPending.wpProtState = WP_PROT_GETTING_WP_IDLE;
break;
case MAVLINK_MSG_ID_SET_GPS_GLOBAL_ORIGIN:
writeSuccess = SUCCESS;
memset(&mlSingleWp, 0, sizeof (mavlink_mission_item_t));
mavlink_msg_set_gps_global_origin_decode(&msg, &mlGSLocation);
mlSingleWp.x = (float) (mlGSLocation.latitude);
mlSingleWp.y = (float) (mlGSLocation.longitude);
mlSingleWp.z = (float) (mlGSLocation.altitude);
indx = (uint8_t) MAX_NUM_WPS - 1;
mlWpValues.lat[indx] = mlSingleWp.x;
mlWpValues.lon[indx] = mlSingleWp.y;
mlWpValues.alt[indx] = mlSingleWp.z;
mlWpValues.type[indx] = MAV_CMD_NAV_LAND;
mlWpValues.orbit[indx] = 0;
// Record the data in EEPROM
/*
writeSuccess = storeWaypointInEeprom(&mlSingleWp);
if (writeSuccess != SUCCESS) {
mlPending.statustext++;
mlStatustext.severity = MAV_SEVERITY_ERROR;
strncpy(mlStatustext.text, "Failed to write origin to EEPROM.", 49);
}
else {
mlPending.statustext++;
mlStatustext.severity = MAV_SEVERITY_INFO;
strncpy(mlStatustext.text, "Control DSC GPS origin set.", 49);
}
*/
break;
//AM DBG
case MAVLINK_MSG_ID_PARAM_REQUEST_LIST:
mlPending.piTransaction = 1;
mlPending.piProtState = PI_SEND_ALL_PARAM;
mlPending.piCurrentParamInTransaction = 0;
break;
case MAVLINK_MSG_ID_PARAM_REQUEST_READ:
// If it was in the middle of a list transmission or there is already a param enqueued
mlPending.piTransaction = 1;
switch (mlPending.piProtState) {
case PI_IDLE:
mlPending.piBackToList = 0; // no need to go back
mlPending.piQIdx = -1; // no Index
mlPending.piCurrentParamInTransaction = mavlink_msg_param_request_read_get_param_index(&msg); // assign directly
mlPending.piProtState = PI_SEND_ONE_PARAM;
break;
case PI_SEND_ALL_PARAM:
mlPending.piBackToList = 1; // mark to go back
mlPending.piQIdx++; // done like this because when empty index = -1
mlPending.piQueue[mlPending.piQIdx] = mavlink_msg_param_request_read_get_param_index(&msg); // put in in queue
mlPending.piProtState = PI_SEND_ONE_PARAM;
break;
case PI_SEND_ONE_PARAM:
if (mlPending.piBackToList) {
mlPending.piQIdx++; // done like this because when empty index = -1
mlPending.piQueue[mlPending.piQIdx] = mavlink_msg_param_request_read_get_param_index(&msg); // put in in queue
}
mlPending.piProtState = PI_SEND_ONE_PARAM;
break;
}
break;
case MAVLINK_MSG_ID_PARAM_SET:
mavlink_msg_param_set_decode(&msg, &set);
if ((uint8_t) set.target_system == (uint8_t) SYSTEMID &&
(uint8_t) set.target_component == (uint8_t) COMPID) {
char* key = (char*) set.param_id;
uint8_t i, j;
uint8_t match;
for (i = 0; i < PAR_PARAM_COUNT; i++) {
match = 1;
for (j = 0; j < PARAM_NAME_LENGTH; j++) {
// Compare
if (((char) (mlParamInterface.param_name[i][j]))
!= (char) (key[j])) {
match = 0;
} // if
// End matching if null termination is reached
if (((char) mlParamInterface.param_name[i][j]) == '\0') {
break;
} // if
}// for j
// Check if matched
if (match) {
//sw_debug = 1;
// Only write and emit changes if there is actually a difference
// AND only write if new value is NOT "not-a-number"
// AND is NOT infinity
if (isFinite(set.param_value)) {
mlParamInterface.param[i] = set.param_value;
// Report back new value
mlPending.piBackToList = 0; // no need to go back
mlPending.piQIdx = -1; // no Index
mlPending.piCurrentParamInTransaction = i; // assign directly
mlPending.piProtState = PI_SEND_ONE_PARAM;
mlPending.piTransaction = 1;
} // if different and not nan and not inf
} // if match
}// for i
} // if addressed to this
break;
default:
break;
}
}
}
}
void mavlink_wpm_message_handler(const mavlink_message_t* msg)
{
uint64_t now = mavlink_missionlib_get_system_timestamp();
switch(msg->msgid)
{
case MAVLINK_MSG_ID_ATTITUDE:
{
if(msg->sysid == mavlink_system.sysid && wpm.current_active_wp_id < wpm.size)
{
mavlink_mission_item_t *wp = &(wpm.waypoints[wpm.current_active_wp_id]);
if(wp->frame == MAV_FRAME_LOCAL_ENU || wp->frame == MAV_FRAME_LOCAL_NED)
{
mavlink_attitude_t att;
mavlink_msg_attitude_decode(msg, &att);
float yaw_tolerance = wpm.accept_range_yaw;
//compare current yaw
if (att.yaw - yaw_tolerance >= 0.0f && att.yaw + yaw_tolerance < 2.f*M_PI)
{
if (att.yaw - yaw_tolerance <= wp->param4 && att.yaw + yaw_tolerance >= wp->param4)
wpm.yaw_reached = true;
}
else if(att.yaw - yaw_tolerance < 0.0f)
{
float lowerBound = 360.0f + att.yaw - yaw_tolerance;
if (lowerBound < wp->param4 || wp->param4 < att.yaw + yaw_tolerance)
wpm.yaw_reached = true;
}
else
{
float upperBound = att.yaw + yaw_tolerance - 2.f*M_PI;
if (att.yaw - yaw_tolerance < wp->param4 || wp->param4 < upperBound)
wpm.yaw_reached = true;
}
}
}
break;
}
case MAVLINK_MSG_ID_LOCAL_POSITION_NED:
{
if(msg->sysid == mavlink_system.sysid && wpm.current_active_wp_id < wpm.size)
{
mavlink_mission_item_t *wp = &(wpm.waypoints[wpm.current_active_wp_id]);
if(wp->frame == MAV_FRAME_LOCAL_ENU || MAV_FRAME_LOCAL_NED)
{
mavlink_local_position_ned_t pos;
mavlink_msg_local_position_ned_decode(msg, &pos);
//// if (debug) // printf("Received new position: x: %f | y: %f | z: %f\n", pos.x, pos.y, pos.z);
wpm.pos_reached = false;
// compare current position (given in message) with current waypoint
float orbit = wp->param1;
float dist;
// if (wp->param2 == 0)
// {
// // FIXME segment distance
// //dist = mavlink_wpm_distance_to_segment(current_active_wp_id, pos.x, pos.y, pos.z);
// }
// else
// {
dist = mavlink_wpm_distance_to_point(wpm.current_active_wp_id, pos.x, pos.y, pos.z);
// }
if (dist >= 0.f && dist <= orbit && wpm.yaw_reached)
{
wpm.pos_reached = true;
}
}
}
break;
}
// case MAVLINK_MSG_ID_CMD: // special action from ground station
// {
// mavlink_cmd_t action;
// mavlink_msg_cmd_decode(msg, &action);
// if(action.target == mavlink_system.sysid)
// {
// // if (verbose) std::cerr << "Waypoint: received message with action " << action.action << std::endl;
// switch (action.action)
// {
// // case MAV_ACTION_LAUNCH:
// // // if (verbose) std::cerr << "Launch received" << std::endl;
// // current_active_wp_id = 0;
// // if (wpm.size>0)
// // {
// // setActive(waypoints[current_active_wp_id]);
// // }
// // else
// // // if (verbose) std::cerr << "No launch, waypointList empty" << std::endl;
// // break;
//
// // case MAV_ACTION_CONTINUE:
// // // if (verbose) std::c
// // err << "Continue received" << std::endl;
// // idle = false;
// // setActive(waypoints[current_active_wp_id]);
// // break;
//
// // case MAV_ACTION_HALT:
// // // if (verbose) std::cerr << "Halt received" << std::endl;
// // idle = true;
// // break;
//
// // default:
// // // if (verbose) std::cerr << "Unknown action received with id " << action.action << ", no action taken" << std::endl;
// // break;
// }
// }
// break;
// }
case MAVLINK_MSG_ID_MISSION_ACK:
{
mavlink_mission_ack_t wpa;
mavlink_msg_mission_ack_decode(msg, &wpa);
if((msg->sysid == wpm.current_partner_sysid && msg->compid == wpm.current_partner_compid) && (wpa.target_system == mavlink_system.sysid /*&& wpa.target_component == mavlink_wpm_comp_id*/))
{
wpm.timestamp_lastaction = now;
if (wpm.current_state == MAVLINK_WPM_STATE_SENDLIST || wpm.current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS)
{
if (wpm.current_wp_id == wpm.size-1)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("Got last WP ACK state -> IDLE");
#else
if (MAVLINK_WPM_VERBOSE) printf("Received ACK after having sent last waypoint, going to state MAVLINK_WPM_STATE_IDLE\n");
#endif
wpm.current_state = MAVLINK_WPM_STATE_IDLE;
wpm.current_wp_id = 0;
}
}
}
else
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: curr partner id mismatch");
#else
if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n");
#endif
}
break;
}
case MAVLINK_MSG_ID_MISSION_SET_CURRENT:
{
mavlink_mission_set_current_t wpc;
mavlink_msg_mission_set_current_decode(msg, &wpc);
if(wpc.target_system == mavlink_system.sysid /*&& wpc.target_component == mavlink_wpm_comp_id*/)
{
wpm.timestamp_lastaction = now;
if (wpm.current_state == MAVLINK_WPM_STATE_IDLE)
{
if (wpc.seq < wpm.size)
{
// if (verbose) // printf("Received MAVLINK_MSG_ID_MISSION_ITEM_SET_CURRENT\n");
wpm.current_active_wp_id = wpc.seq;
uint32_t i;
for(i = 0; i < wpm.size; i++)
{
if (i == wpm.current_active_wp_id)
{
wpm.waypoints[i].current = true;
}
else
{
wpm.waypoints[i].current = false;
}
}
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("NEW WP SET");
#else
if (MAVLINK_WPM_VERBOSE) printf("New current waypoint %u\n", wpm.current_active_wp_id);
#endif
wpm.yaw_reached = false;
wpm.pos_reached = false;
mavlink_wpm_send_waypoint_current(wpm.current_active_wp_id);
mavlink_wpm_send_setpoint(wpm.current_active_wp_id);
wpm.timestamp_firstinside_orbit = 0;
}
else
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("IGN WP CURR CMD: Not in list");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_SET_CURRENT: Index out of bounds\n");
#endif
}
}
else
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("IGN WP CURR CMD: Busy");
#else
if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE NOT IN IDLE STATE\n");
#endif
}
}
else
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch");
#else
if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n");
#endif
}
break;
}
case MAVLINK_MSG_ID_MISSION_REQUEST_LIST:
{
mavlink_mission_request_list_t wprl;
mavlink_msg_mission_request_list_decode(msg, &wprl);
if(wprl.target_system == mavlink_system.sysid /*&& wprl.target_component == mavlink_wpm_comp_id*/)
{
wpm.timestamp_lastaction = now;
if (wpm.current_state == MAVLINK_WPM_STATE_IDLE || wpm.current_state == MAVLINK_WPM_STATE_SENDLIST)
{
if (wpm.size > 0)
{
//if (verbose && wpm.current_state == MAVLINK_WPM_STATE_IDLE) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST from %u changing state to MAVLINK_WPM_STATE_SENDLIST\n", msg->sysid);
// if (verbose && wpm.current_state == MAVLINK_WPM_STATE_SENDLIST) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST again from %u staying in state MAVLINK_WPM_STATE_SENDLIST\n", msg->sysid);
wpm.current_state = MAVLINK_WPM_STATE_SENDLIST;
wpm.current_wp_id = 0;
wpm.current_partner_sysid = msg->sysid;
wpm.current_partner_compid = msg->compid;
}
else
{
// if (verbose) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST from %u but have no waypoints, staying in \n", msg->sysid);
}
wpm.current_count = wpm.size;
mavlink_wpm_send_waypoint_count(msg->sysid,msg->compid, wpm.current_count);
}
else
{
// if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST because i'm doing something else already (state=%i).\n", wpm.current_state);
}
}
else
{
// if (verbose) // printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT MISMATCH\n");
}
break;
}
case MAVLINK_MSG_ID_MISSION_REQUEST:
{
mavlink_mission_request_t wpr;
mavlink_msg_mission_request_decode(msg, &wpr);
if(msg->sysid == wpm.current_partner_sysid && msg->compid == wpm.current_partner_compid && wpr.target_system == mavlink_system.sysid /*&& wpr.target_component == mavlink_wpm_comp_id*/)
{
wpm.timestamp_lastaction = now;
//ensure that we are in the correct state and that the first request has id 0 and the following requests have either the last id (re-send last waypoint) or last_id+1 (next waypoint)
if ((wpm.current_state == MAVLINK_WPM_STATE_SENDLIST && wpr.seq == 0) || (wpm.current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && (wpr.seq == wpm.current_wp_id || wpr.seq == wpm.current_wp_id + 1) && wpr.seq < wpm.size))
{
if (wpm.current_state == MAVLINK_WPM_STATE_SENDLIST)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("GOT WP REQ, state -> SEND");
#else
if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u from %u changing state to MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid);
#endif
}
if (wpm.current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && wpr.seq == wpm.current_wp_id + 1)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("GOT 2nd WP REQ");
#else
if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u from %u staying in state MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid);
#endif
}
if (wpm.current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && wpr.seq == wpm.current_wp_id)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("GOT 2nd WP REQ");
#else
if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u (again) from %u staying in state MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid);
#endif
}
wpm.current_state = MAVLINK_WPM_STATE_SENDLIST_SENDWPS;
wpm.current_wp_id = wpr.seq;
mavlink_wpm_send_waypoint(wpm.current_partner_sysid, wpm.current_partner_compid, wpr.seq);
}
else
{
// if (verbose)
{
if (!(wpm.current_state == MAVLINK_WPM_STATE_SENDLIST || wpm.current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS))
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because i'm doing something else already (state=%i).\n", wpm.current_state);
#endif
break;
}
else if (wpm.current_state == MAVLINK_WPM_STATE_SENDLIST)
{
if (wpr.seq != 0)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: First id != 0");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the first requested waypoint ID (%u) was not 0.\n", wpr.seq);
#endif
}
}
else if (wpm.current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS)
{
if (wpr.seq != wpm.current_wp_id && wpr.seq != wpm.current_wp_id + 1)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Req. WP was unexpected");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the requested waypoint ID (%u) was not the expected (%u or %u).\n", wpr.seq, wpm.current_wp_id, wpm.current_wp_id+1);
#endif
}
else if (wpr.seq >= wpm.size)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Req. WP not in list");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the requested waypoint ID (%u) was out of bounds.\n", wpr.seq);
#endif
}
}
else
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: ?");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST - FIXME: missed error description\n");
#endif
}
}
}
}
else
{
//we we're target but already communicating with someone else
if((wpr.target_system == mavlink_system.sysid /*&& wpr.target_component == mavlink_wpm_comp_id*/) && !(msg->sysid == wpm.current_partner_sysid && msg->compid == wpm.current_partner_compid))
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST from ID %u because i'm already talking to ID %u.\n", msg->sysid, wpm.current_partner_sysid);
#endif
}
else
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch");
#else
if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n");
#endif
}
}
break;
}
case MAVLINK_MSG_ID_MISSION_COUNT:
{
mavlink_mission_count_t wpc;
mavlink_msg_mission_count_decode(msg, &wpc);
if(wpc.target_system == mavlink_system.sysid/* && wpc.target_component == mavlink_wpm_comp_id*/)
{
wpm.timestamp_lastaction = now;
if (wpm.current_state == MAVLINK_WPM_STATE_IDLE || (wpm.current_state == MAVLINK_WPM_STATE_GETLIST && wpm.current_wp_id == 0))
{
if (wpc.count > 0)
{
if (wpm.current_state == MAVLINK_WPM_STATE_IDLE)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("WP CMD OK: state -> GETLIST");
#else
if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_COUNT (%u) from %u changing state to MAVLINK_WPM_STATE_GETLIST\n", wpc.count, msg->sysid);
#endif
}
if (wpm.current_state == MAVLINK_WPM_STATE_GETLIST)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("WP CMD OK AGAIN");
#else
if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_COUNT (%u) again from %u\n", wpc.count, msg->sysid);
#endif
}
wpm.current_state = MAVLINK_WPM_STATE_GETLIST;
wpm.current_wp_id = 0;
wpm.current_partner_sysid = msg->sysid;
wpm.current_partner_compid = msg->compid;
wpm.current_count = wpc.count;
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("CLR RCV BUF: READY");
#else
if (MAVLINK_WPM_VERBOSE) printf("clearing receive buffer and readying for receiving waypoints\n");
#endif
wpm.rcv_size = 0;
//while(waypoints_receive_buffer->size() > 0)
// {
// delete waypoints_receive_buffer->back();
// waypoints_receive_buffer->pop_back();
// }
mavlink_wpm_send_waypoint_request(wpm.current_partner_sysid, wpm.current_partner_compid, wpm.current_wp_id);
}
else if (wpc.count == 0)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("COUNT 0");
#else
if (MAVLINK_WPM_VERBOSE) printf("got waypoint count of 0, clearing waypoint list and staying in state MAVLINK_WPM_STATE_IDLE\n");
#endif
wpm.rcv_size = 0;
//while(waypoints_receive_buffer->size() > 0)
// {
// delete waypoints->back();
// waypoints->pop_back();
// }
wpm.current_active_wp_id = -1;
wpm.yaw_reached = false;
wpm.pos_reached = false;
break;
}
else
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("IGN WP CMD");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignoring MAVLINK_MSG_ID_MISSION_ITEM_COUNT from %u with count of %u\n", msg->sysid, wpc.count);
#endif
}
}
else
{
if (!(wpm.current_state == MAVLINK_WPM_STATE_IDLE || wpm.current_state == MAVLINK_WPM_STATE_GETLIST))
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT because i'm doing something else already (state=%i).\n", wpm.current_state);
#endif
}
else if (wpm.current_state == MAVLINK_WPM_STATE_GETLIST && wpm.current_wp_id != 0)
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT because i'm already receiving waypoint %u.\n", wpm.current_wp_id);
#endif
}
else
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: ?");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT - FIXME: missed error description\n");
#endif
}
}
}
else
{
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch");
#else
if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n");
#endif
}
}
break;
case MAVLINK_MSG_ID_MISSION_ITEM:
{
mavlink_mission_item_t wp;
mavlink_msg_mission_item_decode(msg, &wp);
mavlink_missionlib_send_gcs_string("GOT WP");
if((msg->sysid == wpm.current_partner_sysid && msg->compid == wpm.current_partner_compid) && (wp.target_system == mavlink_system.sysid /*&& wp.target_component == mavlink_wpm_comp_id*/))
{
wpm.timestamp_lastaction = now;
//ensure that we are in the correct state and that the first waypoint has id 0 and the following waypoints have the correct ids
if ((wpm.current_state == MAVLINK_WPM_STATE_GETLIST && wp.seq == 0) || (wpm.current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq == wpm.current_wp_id && wp.seq < wpm.current_count))
{
// if (verbose && wpm.current_state == MAVLINK_WPM_STATE_GETLIST) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u from %u changing state to MAVLINK_WPM_STATE_GETLIST_GETWPS\n", wp.seq, msg->sysid);
// if (verbose && wpm.current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq == wpm.current_wp_id) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u from %u\n", wp.seq, msg->sysid);
// if (verbose && wpm.current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq-1 == wpm.current_wp_id) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u (again) from %u\n", wp.seq, msg->sysid);
//
wpm.current_state = MAVLINK_WPM_STATE_GETLIST_GETWPS;
mavlink_mission_item_t* newwp = &(wpm.rcv_waypoints[wp.seq]);
memcpy(newwp, &wp, sizeof(mavlink_mission_item_t));
wpm.current_wp_id = wp.seq + 1;
// if (verbose) // printf ("Added new waypoint to list. X= %f\t Y= %f\t Z= %f\t Yaw= %f\n", newwp->x, newwp->y, newwp->z, newwp->param4);
if(wpm.current_wp_id == wpm.current_count && wpm.current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS)
{
mavlink_missionlib_send_gcs_string("GOT ALL WPS");
// if (verbose) // printf("Got all %u waypoints, changing state to MAVLINK_WPM_STATE_IDLE\n", wpm.current_count);
mavlink_wpm_send_waypoint_ack(wpm.current_partner_sysid, wpm.current_partner_compid, 0);
if (wpm.current_active_wp_id > wpm.rcv_size-1)
{
wpm.current_active_wp_id = wpm.rcv_size-1;
}
// switch the waypoints list
// FIXME CHECK!!!
for (int i = 0; i < wpm.current_count; ++i)
{
wpm.waypoints[i] = wpm.rcv_waypoints[i];
}
wpm.size = wpm.current_count;
//get the new current waypoint
uint32_t i;
for(i = 0; i < wpm.size; i++)
{
if (wpm.waypoints[i].current == 1)
{
wpm.current_active_wp_id = i;
//// if (verbose) // printf("New current waypoint %u\n", current_active_wp_id);
wpm.yaw_reached = false;
wpm.pos_reached = false;
mavlink_wpm_send_waypoint_current(wpm.current_active_wp_id);
mavlink_wpm_send_setpoint(wpm.current_active_wp_id);
wpm.timestamp_firstinside_orbit = 0;
break;
}
}
if (i == wpm.size)
{
wpm.current_active_wp_id = -1;
wpm.yaw_reached = false;
wpm.pos_reached = false;
wpm.timestamp_firstinside_orbit = 0;
}
wpm.current_state = MAVLINK_WPM_STATE_IDLE;
}
else
{
mavlink_wpm_send_waypoint_request(wpm.current_partner_sysid, wpm.current_partner_compid, wpm.current_wp_id);
}
}
else
{
if (wpm.current_state == MAVLINK_WPM_STATE_IDLE)
{
//we're done receiving waypoints, answer with ack.
mavlink_wpm_send_waypoint_ack(wpm.current_partner_sysid, wpm.current_partner_compid, 0);
// printf("Received MAVLINK_MSG_ID_MISSION_ITEM while state=MAVLINK_WPM_STATE_IDLE, answered with WAYPOINT_ACK.\n");
}
// if (verbose)
{
if (!(wpm.current_state == MAVLINK_WPM_STATE_GETLIST || wpm.current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS))
{
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u because i'm doing something else already (state=%i).\n", wp.seq, wpm.current_state);
break;
}
else if (wpm.current_state == MAVLINK_WPM_STATE_GETLIST)
{
if(!(wp.seq == 0))
{
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the first waypoint ID (%u) was not 0.\n", wp.seq);
}
else
{
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq);
}
}
else if (wpm.current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS)
{
if (!(wp.seq == wpm.current_wp_id))
{
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the waypoint ID (%u) was not the expected %u.\n", wp.seq, wpm.current_wp_id);
}
else if (!(wp.seq < wpm.current_count))
{
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the waypoint ID (%u) was out of bounds.\n", wp.seq);
}
else
{
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq);
}
}
else
{
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq);
}
}
}
}
else
{
//we we're target but already communicating with someone else
if((wp.target_system == mavlink_system.sysid /*&& wp.target_component == mavlink_wpm_comp_id*/) && !(msg->sysid == wpm.current_partner_sysid && msg->compid == wpm.current_partner_compid) && wpm.current_state != MAVLINK_WPM_STATE_IDLE)
{
// if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u from ID %u because i'm already talking to ID %u.\n", wp.seq, msg->sysid, wpm.current_partner_sysid);
}
else if(wp.target_system == mavlink_system.sysid /* && wp.target_component == mavlink_wpm_comp_id*/)
{
// if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u from ID %u because i have no idea what to do with it\n", wp.seq, msg->sysid);
}
}
break;
}
case MAVLINK_MSG_ID_MISSION_CLEAR_ALL:
{
mavlink_mission_clear_all_t wpca;
mavlink_msg_mission_clear_all_decode(msg, &wpca);
if(wpca.target_system == mavlink_system.sysid /*&& wpca.target_component == mavlink_wpm_comp_id */ && wpm.current_state == MAVLINK_WPM_STATE_IDLE)
{
wpm.timestamp_lastaction = now;
// if (verbose) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_CLEAR_LIST from %u deleting all waypoints\n", msg->sysid);
// Delete all waypoints
wpm.size = 0;
wpm.current_active_wp_id = -1;
wpm.yaw_reached = false;
wpm.pos_reached = false;
}
else if (wpca.target_system == mavlink_system.sysid /*&& wpca.target_component == mavlink_wpm_comp_id */ && wpm.current_state != MAVLINK_WPM_STATE_IDLE)
{
// if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_CLEAR_LIST from %u because i'm doing something else already (state=%i).\n", msg->sysid, wpm.current_state);
}
break;
}
default:
{
// if (debug) // printf("Waypoint: received message of unknown type");
break;
}
}
//check if the current waypoint was reached
if (wpm.pos_reached /*wpm.yaw_reached &&*/ && !wpm.idle)
{
if (wpm.current_active_wp_id < wpm.size)
{
mavlink_mission_item_t *cur_wp = &(wpm.waypoints[wpm.current_active_wp_id]);
if (wpm.timestamp_firstinside_orbit == 0)
{
// Announce that last waypoint was reached
// if (verbose) // printf("*** Reached waypoint %u ***\n", cur_wp->seq);
mavlink_wpm_send_waypoint_reached(cur_wp->seq);
wpm.timestamp_firstinside_orbit = now;
}
// check if the MAV was long enough inside the waypoint orbit
//if (now-timestamp_lastoutside_orbit > (cur_wp->hold_time*1000))
if(now-wpm.timestamp_firstinside_orbit >= cur_wp->param2*1000)
{
if (cur_wp->autocontinue)
{
cur_wp->current = 0;
if (wpm.current_active_wp_id == wpm.size - 1 && wpm.size > 1)
{
//the last waypoint was reached, if auto continue is
//activated restart the waypoint list from the beginning
wpm.current_active_wp_id = 1;
}
else
{
if ((uint16_t)(wpm.current_active_wp_id + 1) < wpm.size)
wpm.current_active_wp_id++;
}
// Fly to next waypoint
wpm.timestamp_firstinside_orbit = 0;
mavlink_wpm_send_waypoint_current(wpm.current_active_wp_id);
mavlink_wpm_send_setpoint(wpm.current_active_wp_id);
wpm.waypoints[wpm.current_active_wp_id].current = true;
wpm.pos_reached = false;
wpm.yaw_reached = false;
// if (verbose) // printf("Set new waypoint (%u)\n", wpm.current_active_wp_id);
}
}
}
}
else
{
wpm.timestamp_lastoutside_orbit = now;
}
}
void mavlink_connector::handle_missions(mavlink_message_t *msg)
{
mavlink_message_t resp;
switch (msg->msgid)
{
case MAVLINK_MSG_ID_MISSION_REQUEST_LIST: {
mavlink_mission_count_t count;
count.count = dji_variable::wp_m.missions[0].size();
count.target_component = msg->compid;
count.target_system = msg->sysid;
mavlink_msg_mission_count_encode(0, 200, &resp, &count);
this->send_msg(&resp);
break;
}
case MAVLINK_MSG_ID_MISSION_REQUEST: {
mavlink_mission_request_t req;
mavlink_msg_mission_request_decode(msg, &req);
// printf("ground is trying to request mission %d \n",req.seq);
std::vector<mavlink_mission_item_t> mission_msgs
= dji_variable::wp_m.missions[0].to_mission_items();
mavlink_mission_item_t a = mission_msgs[req.seq];
a.target_system = msg->sysid;
a.target_component = msg->compid;
a.current = (a.seq == dji_variable::wp_m.waypoint_ptr && dji_variable::wp_m.mission_id == 0)? 1:0;
mavlink_msg_mission_item_encode(0,200, &resp, &a);
this->send_msg(&resp);
break;
}
case MAVLINK_MSG_ID_MISSION_COUNT: {
mavlink_mission_count_t mission_count_t;
mavlink_msg_mission_count_decode(msg, &mission_count_t);
if (MISSION_REC_STATE == MISSION_REC_STANDBY) {
printf("Ground is trying to set a waypoint long as %d\n", mission_count_t.count);
waypoint_length_size = mission_count_t.count;
waypoint_waitfor = 0;
dji_variable::wp_m.missions[0].clear();
MISSION_REC_STATE = MISSION_REC_WAIT_FOR;
mavlink_mission_request_t request_t;
request_t.target_component = msg->compid;
request_t.target_system = msg->sysid;
request_t.seq = 0;
mavlink_msg_mission_request_encode(0,200,&resp,&request_t);
this->send_msg(&resp);
break;
}
};
case MAVLINK_MSG_ID_MISSION_ITEM:
{
if (MISSION_REC_STATE != MISSION_REC_WAIT_FOR)
break;
mavlink_mission_item_t mission_item_t;
mavlink_msg_mission_item_decode(msg,&mission_item_t);
printf("seq:%d %f %f cmd: %d\n",mission_item_t.seq,mission_item_t.x,mission_item_t.y,mission_item_t.command);
api_pos_custom_data_t wp;
wp.lati = mission_item_t.x /180 * M_PI;
wp.longti = mission_item_t.y /180 * M_PI;
wp.alti = mission_item_t.z;
wp.cmd = mission_item_t.command;
// wp.uncertain = mission_item_t.
wp.uncertain = 10 ;
mavlink_mission_request_t request_t;
request_t.target_component = msg->compid;
request_t.target_system = msg->sysid;
if (mission_item_t.seq == waypoint_waitfor)
{
waypoint_waitfor ++;
request_t.seq = waypoint_waitfor;
dji_variable::wp_m.missions[0].waypoints.push_back(wp);
if (request_t.seq < waypoint_length_size) {
mavlink_msg_mission_request_encode(0, 200, &resp, &request_t);
this->send_msg(&resp);
}
else{
std::cout << dji_variable::wp_m.missions[0];
waypoint_waitfor = 0;
waypoint_length_size = 0;
MISSION_REC_STATE = MISSION_REC_STANDBY;
mavlink_mission_ack_t ack_t;
ack_t.target_component = msg->compid;
ack_t.target_system = msg->sysid;
ack_t.type = MAV_MISSION_RESULT::MAV_MISSION_ACCEPTED;
mavlink_msg_mission_ack_encode(0,200,&resp,&ack_t);
this->send_msg(&resp);
}
}
else{
request_t.seq = waypoint_waitfor;
mavlink_msg_mission_request_encode(0, 200, &resp, &request_t);
this->send_msg(&resp);
}
break;
};
case MAVLINK_MSG_ID_MISSION_SET_CURRENT:
{
mavlink_mission_set_current_t set_current_t;
mavlink_msg_mission_set_current_decode(msg,&set_current_t);
int ptr = set_current_t.seq;
printf("say system is trying to set current %d \n",ptr);
dji_variable::wp_m.mission_id = 0;
dji_variable::wp_m.waypoint_ptr = ptr;
dji_variable::wp_m.begin_fly_waypoints(0,ptr);
mavlink_mission_ack_t ack_t;
ack_t.target_component = msg->compid;
ack_t.target_system = msg->sysid;
ack_t.type = MAV_MISSION_RESULT::MAV_MISSION_ACCEPTED;
mavlink_msg_mission_ack_encode(0,200,&resp,&ack_t);
this->send_msg(&resp);
};
default:
break;
}
}
void mavlink_wpm_message_handler(const mavlink_message_t *msg, const struct vehicle_global_position_s *global_pos , struct vehicle_local_position_s *local_pos)
{
uint64_t now = mavlink_missionlib_get_system_timestamp();
switch (msg->msgid) {
case MAVLINK_MSG_ID_MISSION_ACK: {
mavlink_mission_ack_t wpa;
mavlink_msg_mission_ack_decode(msg, &wpa);
if ((msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid) && (wpa.target_system == mavlink_system.sysid /*&& wpa.target_component == mavlink_wpm_comp_id*/)) {
wpm->timestamp_lastaction = now;
if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST || wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS) {
if (wpm->current_wp_id == wpm->size - 1) {
mavlink_missionlib_send_gcs_string("Got last WP ACK state -> IDLE");
wpm->current_state = MAVLINK_WPM_STATE_IDLE;
wpm->current_wp_id = 0;
}
}
} else {
mavlink_missionlib_send_gcs_string("REJ. WP CMD: curr partner id mismatch");
}
break;
}
case MAVLINK_MSG_ID_MISSION_SET_CURRENT: {
mavlink_mission_set_current_t wpc;
mavlink_msg_mission_set_current_decode(msg, &wpc);
if (wpc.target_system == mavlink_system.sysid /*&& wpc.target_component == mavlink_wpm_comp_id*/) {
wpm->timestamp_lastaction = now;
if (wpm->current_state == MAVLINK_WPM_STATE_IDLE) {
if (wpc.seq < wpm->size) {
// if (verbose) // printf("Received MAVLINK_MSG_ID_MISSION_ITEM_SET_CURRENT\n");
wpm->current_active_wp_id = wpc.seq;
uint32_t i;
for (i = 0; i < wpm->size; i++) {
if (i == wpm->current_active_wp_id) {
wpm->waypoints[i].current = true;
} else {
wpm->waypoints[i].current = false;
}
}
mavlink_missionlib_send_gcs_string("NEW WP SET");
wpm->yaw_reached = false;
wpm->pos_reached = false;
mavlink_wpm_send_waypoint_current(wpm->current_active_wp_id);
mavlink_wpm_send_setpoint(wpm->current_active_wp_id);
wpm->timestamp_firstinside_orbit = 0;
} else {
mavlink_missionlib_send_gcs_string("IGN WP CURR CMD: Not in list");
}
} else {
mavlink_missionlib_send_gcs_string("IGN WP CURR CMD: Busy");
}
} else {
mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch");
}
break;
}
case MAVLINK_MSG_ID_MISSION_REQUEST_LIST: {
mavlink_mission_request_list_t wprl;
mavlink_msg_mission_request_list_decode(msg, &wprl);
if (wprl.target_system == mavlink_system.sysid /*&& wprl.target_component == mavlink_wpm_comp_id*/) {
wpm->timestamp_lastaction = now;
if (wpm->current_state == MAVLINK_WPM_STATE_IDLE || wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) {
if (wpm->size > 0) {
//if (verbose && wpm->current_state == MAVLINK_WPM_STATE_IDLE) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST from %u changing state to MAVLINK_WPM_STATE_SENDLIST\n", msg->sysid);
// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST again from %u staying in state MAVLINK_WPM_STATE_SENDLIST\n", msg->sysid);
wpm->current_state = MAVLINK_WPM_STATE_SENDLIST;
wpm->current_wp_id = 0;
wpm->current_partner_sysid = msg->sysid;
wpm->current_partner_compid = msg->compid;
} else {
// if (verbose) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST from %u but have no waypoints, staying in \n", msg->sysid);
}
wpm->current_count = wpm->size;
mavlink_wpm_send_waypoint_count(msg->sysid, msg->compid, wpm->current_count);
} else {
// if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST_LIST because i'm doing something else already (state=%i).\n", wpm->current_state);
}
} else {
// if (verbose) // printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT MISMATCH\n");
}
break;
}
case MAVLINK_MSG_ID_MISSION_REQUEST: {
mavlink_mission_request_t wpr;
mavlink_msg_mission_request_decode(msg, &wpr);
if (msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid && wpr.target_system == mavlink_system.sysid /*&& wpr.target_component == mavlink_wpm_comp_id*/) {
wpm->timestamp_lastaction = now;
//ensure that we are in the correct state and that the first request has id 0 and the following requests have either the last id (re-send last waypoint) or last_id+1 (next waypoint)
if ((wpm->current_state == MAVLINK_WPM_STATE_SENDLIST && wpr.seq == 0) || (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && (wpr.seq == wpm->current_wp_id || wpr.seq == wpm->current_wp_id + 1) && wpr.seq < wpm->size)) {
if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("GOT WP REQ, state -> SEND");
#else
if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u from %u changing state to MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid);
#endif
}
if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && wpr.seq == wpm->current_wp_id + 1) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("GOT 2nd WP REQ");
#else
if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u from %u staying in state MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid);
#endif
}
if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS && wpr.seq == wpm->current_wp_id) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("GOT 2nd WP REQ");
#else
if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_REQUEST of waypoint %u (again) from %u staying in state MAVLINK_WPM_STATE_SENDLIST_SENDWPS\n", wpr.seq, msg->sysid);
#endif
}
wpm->current_state = MAVLINK_WPM_STATE_SENDLIST_SENDWPS;
wpm->current_wp_id = wpr.seq;
mavlink_wpm_send_waypoint(wpm->current_partner_sysid, wpm->current_partner_compid, wpr.seq);
} else {
// if (verbose)
{
if (!(wpm->current_state == MAVLINK_WPM_STATE_SENDLIST || wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS)) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because i'm doing something else already (state=%i).\n", wpm->current_state);
#endif
break;
} else if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST) {
if (wpr.seq != 0) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: First id != 0");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the first requested waypoint ID (%u) was not 0.\n", wpr.seq);
#endif
}
} else if (wpm->current_state == MAVLINK_WPM_STATE_SENDLIST_SENDWPS) {
if (wpr.seq != wpm->current_wp_id && wpr.seq != wpm->current_wp_id + 1) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Req. WP was unexpected");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the requested waypoint ID (%u) was not the expected (%u or %u).\n", wpr.seq, wpm->current_wp_id, wpm->current_wp_id + 1);
#endif
} else if (wpr.seq >= wpm->size) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Req. WP not in list");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST because the requested waypoint ID (%u) was out of bounds.\n", wpr.seq);
#endif
}
} else {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: ?");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST - FIXME: missed error description\n");
#endif
}
}
}
} else {
//we we're target but already communicating with someone else
if ((wpr.target_system == mavlink_system.sysid /*&& wpr.target_component == mavlink_wpm_comp_id*/) && !(msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid)) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_REQUEST from ID %u because i'm already talking to ID %u.\n", msg->sysid, wpm->current_partner_sysid);
#endif
} else {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch");
#else
if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n");
#endif
}
}
break;
}
case MAVLINK_MSG_ID_MISSION_COUNT: {
mavlink_mission_count_t wpc;
mavlink_msg_mission_count_decode(msg, &wpc);
if (wpc.target_system == mavlink_system.sysid/* && wpc.target_component == mavlink_wpm_comp_id*/) {
wpm->timestamp_lastaction = now;
if (wpm->current_state == MAVLINK_WPM_STATE_IDLE || (wpm->current_state == MAVLINK_WPM_STATE_GETLIST && wpm->current_wp_id == 0)) {
// printf("wpc count in: %d\n",wpc.count);
// printf("Comp id: %d\n",msg->compid);
// printf("Current partner sysid: %d\n",wpm->current_partner_sysid);
if (wpc.count > 0) {
if (wpm->current_state == MAVLINK_WPM_STATE_IDLE) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("WP CMD OK: state -> GETLIST");
#else
if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_COUNT (%u) from %u changing state to MAVLINK_WPM_STATE_GETLIST\n", wpc.count, msg->sysid);
#endif
}
if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("WP CMD OK AGAIN");
#else
if (MAVLINK_WPM_VERBOSE) printf("Got MAVLINK_MSG_ID_MISSION_ITEM_COUNT (%u) again from %u\n", wpc.count, msg->sysid);
#endif
}
wpm->current_state = MAVLINK_WPM_STATE_GETLIST;
wpm->current_wp_id = 0;
wpm->current_partner_sysid = msg->sysid;
wpm->current_partner_compid = msg->compid;
wpm->current_count = wpc.count;
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("CLR RCV BUF: READY");
#else
if (MAVLINK_WPM_VERBOSE) printf("clearing receive buffer and readying for receiving waypoints\n");
#endif
wpm->rcv_size = 0;
//while(waypoints_receive_buffer->size() > 0)
// {
// delete waypoints_receive_buffer->back();
// waypoints_receive_buffer->pop_back();
// }
mavlink_wpm_send_waypoint_request(wpm->current_partner_sysid, wpm->current_partner_compid, wpm->current_wp_id);
} else if (wpc.count == 0) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("COUNT 0");
#else
if (MAVLINK_WPM_VERBOSE) printf("got waypoint count of 0, clearing waypoint list and staying in state MAVLINK_WPM_STATE_IDLE\n");
#endif
wpm->rcv_size = 0;
//while(waypoints_receive_buffer->size() > 0)
// {
// delete waypoints->back();
// waypoints->pop_back();
// }
wpm->current_active_wp_id = -1;
wpm->yaw_reached = false;
wpm->pos_reached = false;
break;
} else {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("IGN WP CMD");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignoring MAVLINK_MSG_ID_MISSION_ITEM_COUNT from %u with count of %u\n", msg->sysid, wpc.count);
#endif
}
} else {
if (!(wpm->current_state == MAVLINK_WPM_STATE_IDLE || wpm->current_state == MAVLINK_WPM_STATE_GETLIST)) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT because i'm doing something else already (state=%i).\n", wpm->current_state);
#endif
} else if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST && wpm->current_wp_id != 0) {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: Busy");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT because i'm already receiving waypoint %u.\n", wpm->current_wp_id);
#endif
} else {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: ?");
#else
if (MAVLINK_WPM_VERBOSE) printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_COUNT - FIXME: missed error description\n");
#endif
}
}
} else {
#ifdef MAVLINK_WPM_NO_PRINTF
mavlink_missionlib_send_gcs_string("REJ. WP CMD: target id mismatch");
#else
if (MAVLINK_WPM_VERBOSE) printf("IGNORED WAYPOINT COMMAND BECAUSE TARGET SYSTEM AND COMPONENT OR COMM PARTNER ID MISMATCH\n");
#endif
}
}
break;
case MAVLINK_MSG_ID_MISSION_ITEM: {
mavlink_mission_item_t wp;
mavlink_msg_mission_item_decode(msg, &wp);
mavlink_missionlib_send_gcs_string("GOT WP");
// printf("sysid=%d, current_partner_sysid=%d\n", msg->sysid, wpm->current_partner_sysid);
// printf("compid=%d, current_partner_compid=%d\n", msg->compid, wpm->current_partner_compid);
// if((msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid) && (wp.target_system == mavlink_system.sysid /*&& wp.target_component == mavlink_wpm_comp_id*/))
if (wp.target_system == mavlink_system.sysid && wp.target_component == mavlink_wpm_comp_id) {
wpm->timestamp_lastaction = now;
// printf("wpm->current_state=%u, wp.seq = %d, wpm->current_wp_id=%d\n", wpm->current_state, wp.seq, wpm->current_wp_id);
// wpm->current_state = MAVLINK_WPM_STATE_GETLIST;//removeme debug XXX TODO
//ensure that we are in the correct state and that the first waypoint has id 0 and the following waypoints have the correct ids
if ((wpm->current_state == MAVLINK_WPM_STATE_GETLIST && wp.seq == 0) || (wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq == wpm->current_wp_id && wp.seq < wpm->current_count)) {
//mavlink_missionlib_send_gcs_string("DEBUG 2");
// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_GETLIST) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u from %u changing state to MAVLINK_WPM_STATE_GETLIST_GETWPS\n", wp.seq, msg->sysid);
// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq == wpm->current_wp_id) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u from %u\n", wp.seq, msg->sysid);
// if (verbose && wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS && wp.seq-1 == wpm->current_wp_id) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM %u (again) from %u\n", wp.seq, msg->sysid);
//
wpm->current_state = MAVLINK_WPM_STATE_GETLIST_GETWPS;
mavlink_mission_item_t *newwp = &(wpm->rcv_waypoints[wp.seq]);
memcpy(newwp, &wp, sizeof(mavlink_mission_item_t));
// printf("WP seq: %d\n",wp.seq);
wpm->current_wp_id = wp.seq + 1;
// if (verbose) // printf ("Added new waypoint to list. X= %f\t Y= %f\t Z= %f\t Yaw= %f\n", newwp->x, newwp->y, newwp->z, newwp->param4);
// printf ("Added new waypoint to list. X= %f\t Y= %f\t Z= %f\t Yaw= %f\n", newwp->x, newwp->y, newwp->z, newwp->param4);
// printf ("wpm->current_wp_id =%d, wpm->current_count=%d\n\n", wpm->current_wp_id, wpm->current_count);
if (wpm->current_wp_id == wpm->current_count && wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS) {
mavlink_missionlib_send_gcs_string("GOT ALL WPS");
// if (verbose) // printf("Got all %u waypoints, changing state to MAVLINK_WPM_STATE_IDLE\n", wpm->current_count);
mavlink_wpm_send_waypoint_ack(wpm->current_partner_sysid, wpm->current_partner_compid, 0);
if (wpm->current_active_wp_id > wpm->rcv_size - 1) {
wpm->current_active_wp_id = wpm->rcv_size - 1;
}
// switch the waypoints list
// FIXME CHECK!!!
uint32_t i;
for (i = 0; i < wpm->current_count; ++i) {
wpm->waypoints[i] = wpm->rcv_waypoints[i];
}
wpm->size = wpm->current_count;
//get the new current waypoint
for (i = 0; i < wpm->size; i++) {
if (wpm->waypoints[i].current == 1) {
wpm->current_active_wp_id = i;
//// if (verbose) // printf("New current waypoint %u\n", current_active_wp_id);
wpm->yaw_reached = false;
wpm->pos_reached = false;
mavlink_wpm_send_waypoint_current(wpm->current_active_wp_id);
mavlink_wpm_send_setpoint(wpm->current_active_wp_id);
wpm->timestamp_firstinside_orbit = 0;
break;
}
}
if (i == wpm->size) {
wpm->current_active_wp_id = -1;
wpm->yaw_reached = false;
wpm->pos_reached = false;
wpm->timestamp_firstinside_orbit = 0;
}
wpm->current_state = MAVLINK_WPM_STATE_IDLE;
} else {
mavlink_wpm_send_waypoint_request(wpm->current_partner_sysid, wpm->current_partner_compid, wpm->current_wp_id);
}
} else {
if (wpm->current_state == MAVLINK_WPM_STATE_IDLE) {
//we're done receiving waypoints, answer with ack.
mavlink_wpm_send_waypoint_ack(wpm->current_partner_sysid, wpm->current_partner_compid, 0);
printf("Received MAVLINK_MSG_ID_MISSION_ITEM while state=MAVLINK_WPM_STATE_IDLE, answered with WAYPOINT_ACK.\n");
}
// if (verbose)
{
if (!(wpm->current_state == MAVLINK_WPM_STATE_GETLIST || wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS)) {
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u because i'm doing something else already (state=%i).\n", wp.seq, wpm->current_state);
break;
} else if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST) {
if (!(wp.seq == 0)) {
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the first waypoint ID (%u) was not 0.\n", wp.seq);
} else {
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq);
}
} else if (wpm->current_state == MAVLINK_WPM_STATE_GETLIST_GETWPS) {
if (!(wp.seq == wpm->current_wp_id)) {
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the waypoint ID (%u) was not the expected %u.\n", wp.seq, wpm->current_wp_id);
mavlink_wpm_send_waypoint_request(wpm->current_partner_sysid, wpm->current_partner_compid, wpm->current_wp_id);
} else if (!(wp.seq < wpm->current_count)) {
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM because the waypoint ID (%u) was out of bounds.\n", wp.seq);
} else {
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq);
}
} else {
// printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u - FIXME: missed error description\n", wp.seq);
}
}
}
} else {
//we we're target but already communicating with someone else
if ((wp.target_system == mavlink_system.sysid /*&& wp.target_component == mavlink_wpm_comp_id*/) && !(msg->sysid == wpm->current_partner_sysid && msg->compid == wpm->current_partner_compid) && wpm->current_state != MAVLINK_WPM_STATE_IDLE) {
// if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u from ID %u because i'm already talking to ID %u.\n", wp.seq, msg->sysid, wpm->current_partner_sysid);
} else if (wp.target_system == mavlink_system.sysid /* && wp.target_component == mavlink_wpm_comp_id*/) {
// if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM %u from ID %u because i have no idea what to do with it\n", wp.seq, msg->sysid);
}
}
break;
}
case MAVLINK_MSG_ID_MISSION_CLEAR_ALL: {
mavlink_mission_clear_all_t wpca;
mavlink_msg_mission_clear_all_decode(msg, &wpca);
if (wpca.target_system == mavlink_system.sysid /*&& wpca.target_component == mavlink_wpm_comp_id */ && wpm->current_state == MAVLINK_WPM_STATE_IDLE) {
wpm->timestamp_lastaction = now;
// if (verbose) // printf("Got MAVLINK_MSG_ID_MISSION_ITEM_CLEAR_LIST from %u deleting all waypoints\n", msg->sysid);
// Delete all waypoints
wpm->size = 0;
wpm->current_active_wp_id = -1;
wpm->yaw_reached = false;
wpm->pos_reached = false;
} else if (wpca.target_system == mavlink_system.sysid /*&& wpca.target_component == mavlink_wpm_comp_id */ && wpm->current_state != MAVLINK_WPM_STATE_IDLE) {
// if (verbose) // printf("Ignored MAVLINK_MSG_ID_MISSION_ITEM_CLEAR_LIST from %u because i'm doing something else already (state=%i).\n", msg->sysid, wpm->current_state);
}
break;
}
default: {
// if (debug) // printf("Waypoint: received message of unknown type");
break;
}
}
check_waypoints_reached(now, global_pos, local_pos);
}
static inline void MissionRequest(mavlink_message_t* handle_msg)
{
mavlink_mission_request_t packet;
//send_text((uint8_t*)"waypoint request\r\n");
//DPRINT("mission request\r\n");
// Check if in sending waypoint mode ...
if (!mavlink_flags.mavlink_sending_waypoints)
{
DPRINT("mission request not valid, no longer sending\r\n");
return;
}
// decode
mavlink_msg_mission_request_decode(handle_msg, &packet);
if (mavlink_check_target(packet.target_system, packet.target_component)) return;
mavlink_waypoint_timeout = MAVLINK_WAYPOINT_TIMEOUT;
mavlink_waypoint_requested_sequence_number = packet.seq;
DPRINT("mission request: packet.seq %u\r\n", packet.seq);
mavlink_waypoint_frame = MAV_FRAME_GLOBAL; // reference frame
if (mavlink_waypoint_requested_sequence_number == waypointIndex)
{
mavlink_waypoint_current = true;
}
else
{
mavlink_waypoint_current = false;
}
// send waypoint
mavlink_flags.mavlink_send_specific_waypoint = 1;
/************** Not converted to MAVLink wire protocol 1.0 yet *******************/
//uint8_t action = MAV_ACTION_NAVIGATE; // action
//uint8_t orbit_direction = 0; // clockwise(0), counter-clockwise(1)
//float orbit = 0; // loiter radius
//float param1 = 0, param2 = 0;
//switch(tell_command.id)
//{
//case CMD_WAYPOINT: // navigate
//action = MAV_ACTION_NAVIGATE; // action
//break;
// case CMD_LOITER_TIME: // loiter
//orbit = get(PARAM_WP_RADIUS); // XXX setting loiter radius as waypoint acceptance radius
//action = MAV_ACTION_LOITER; // action
//param1 = get(PARAM_WP_RADIUS);
//param2 = tell_command.p1*100; // loiter time
//break;
// case CMD_TAKEOFF: // takeoff
//action = MAV_ACTION_TAKEOFF;
//break;
//case CMD_LAND: // land
//action = MAV_ACTION_LAND;
//break;
//defaut:
//gcs.send_text("command not handled");
//break;
//}
// time that the mav should loiter in milliseconds
//uint8_t current = 0; // 1 (true), 0 (false)
//if (packet.seq == get(PARAM_WP_INDEX)) current = 1;
//float yaw_dir = 0; // yaw orientation in radians, 0 = north XXX: what does this do?
//uint8_t autocontinue = 1; // 1 (true), 0 (false)
//float x = tell_command.lng/1.0e7; // local (x), global (longitude)
//float y = tell_command.lat/1.0e7; // local (y), global (latitude)
//float z = tell_command.alt/1.0e2; // local (z), global (altitude)
// note XXX: documented x,y,z order does not match with gps raw
//mavlink_msg_waypoint_send(chan,handle_msg->sysid,
//handle_msg->compid,packet.seq,frame,action,
//orbit,orbit_direction,param1,param2,current,x,y,z,yaw_dir,autocontinue);
// update last waypoint comm stamp
//global_data.waypoint_timelast_send = millis();
}
void mavlink_handleMessage(mavlink_message_t* msg) {
mavlink_message_t msg2;
char sysmsg_str[1024];
switch (msg->msgid) {
case MAVLINK_MSG_ID_HEARTBEAT: {
mavlink_heartbeat_t packet;
mavlink_msg_heartbeat_decode(msg, &packet);
droneType = packet.type;
autoPilot = packet.autopilot;
if (packet.base_mode == MAV_MODE_MANUAL_ARMED) {
ModelData.mode = MODEL_MODE_MANUAL;
} else if (packet.base_mode == 128 + 64 + 16) {
ModelData.mode = MODEL_MODE_RTL;
} else if (packet.base_mode == 128 + 16) {
ModelData.mode = MODEL_MODE_POSHOLD;
} else if (packet.base_mode == 128 + 4) {
ModelData.mode = MODEL_MODE_MISSION;
}
if (packet.system_status == MAV_STATE_ACTIVE) {
ModelData.armed = MODEL_ARMED;
} else {
ModelData.armed = MODEL_DISARMED;
}
// SDL_Log("Heartbeat: %i, %i, %i\n", ModelData.armed, ModelData.mode, ModelData.status);
ModelData.heartbeat = 100;
// sprintf(sysmsg_str, "Heartbeat: %i", (int)time(0));
if ((*msg).sysid != 0xff) {
ModelData.sysid = (*msg).sysid;
ModelData.compid = (*msg).compid;
if (mavlink_maxparam == 0) {
mavlink_start_feeds();
}
}
redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_RC_CHANNELS_SCALED: {
mavlink_rc_channels_scaled_t packet;
mavlink_msg_rc_channels_scaled_decode(msg, &packet);
// SDL_Log("Radio: %i,%i,%i\n", packet.chan1_scaled, packet.chan2_scaled, packet.chan3_scaled);
/* if ((int)packet.chan6_scaled > 1000) {
mode = MODE_MISSION;
} else if ((int)packet.chan6_scaled < -1000) {
mode = MODE_MANUEL;
} else {
mode = MODE_POSHOLD;
}
if ((int)packet.chan7_scaled > 1000) {
mode = MODE_RTL;
} else if ((int)packet.chan7_scaled < -1000) {
mode = MODE_SETHOME;
}
*/
ModelData.radio[0] = (int)packet.chan1_scaled / 100.0;
ModelData.radio[1] = (int)packet.chan2_scaled / 100.0;
ModelData.radio[2] = (int)packet.chan3_scaled / 100.0;
ModelData.radio[3] = (int)packet.chan4_scaled / 100.0;
ModelData.radio[4] = (int)packet.chan5_scaled / 100.0;
ModelData.radio[5] = (int)packet.chan6_scaled / 100.0;
ModelData.radio[6] = (int)packet.chan7_scaled / 100.0;
ModelData.radio[7] = (int)packet.chan8_scaled / 100.0;
redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_SCALED_PRESSURE: {
mavlink_scaled_pressure_t packet;
mavlink_msg_scaled_pressure_decode(msg, &packet);
// SDL_Log("BAR;%i;%0.2f;%0.2f;%0.2f\n", time(0), packet.press_abs, packet.press_diff, packet.temperature / 100.0);
// redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_ATTITUDE: {
mavlink_attitude_t packet;
mavlink_msg_attitude_decode(msg, &packet);
ModelData.roll = toDeg(packet.roll);
ModelData.pitch = toDeg(packet.pitch);
if (toDeg(packet.yaw) < 0.0) {
ModelData.yaw = 360.0 + toDeg(packet.yaw);
} else {
ModelData.yaw = toDeg(packet.yaw);
}
mavlink_update_yaw = 1;
// SDL_Log("ATT;%i;%0.2f;%0.2f;%0.2f\n", time(0), toDeg(packet.roll), toDeg(packet.pitch), toDeg(packet.yaw));
redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_SCALED_IMU: {
// SDL_Log("SCALED_IMU\n");
break;
}
case MAVLINK_MSG_ID_GPS_RAW_INT: {
mavlink_gps_raw_int_t packet;
mavlink_msg_gps_raw_int_decode(msg, &packet);
if (packet.lat != 0.0) {
GPS_found = 1;
ModelData.p_lat = (float)packet.lat / 10000000.0;
ModelData.p_long = (float)packet.lon / 10000000.0;
ModelData.p_alt = (float)packet.alt / 1000.0;
ModelData.speed = (float)packet.vel / 100.0;
ModelData.numSat = packet.satellites_visible;
ModelData.gpsfix = packet.fix_type;
redraw_flag = 1;
}
break;
}
case MAVLINK_MSG_ID_RC_CHANNELS_RAW: {
// SDL_Log("RC_CHANNELS_RAW\n");
break;
}
case MAVLINK_MSG_ID_SERVO_OUTPUT_RAW: {
// SDL_Log("SERVO_OUTPUT_RAW\n");
break;
}
case MAVLINK_MSG_ID_SYS_STATUS: {
mavlink_sys_status_t packet;
mavlink_msg_sys_status_decode(msg, &packet);
// SDL_Log("%0.1f %%, %0.3f V)\n", packet.load / 10.0, packet.voltage_battery / 1000.0);
ModelData.voltage = packet.voltage_battery / 1000.0;
ModelData.load = packet.load / 10.0;
redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_STATUSTEXT: {
mavlink_statustext_t packet;
mavlink_msg_statustext_decode(msg, &packet);
SDL_Log("mavlink: ## %s ##\n", packet.text);
sys_message((char *)packet.text);
redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_PARAM_VALUE: {
mavlink_param_value_t packet;
mavlink_msg_param_value_decode(msg, &packet);
char var[101];
uint16_t n1 = 0;
uint16_t n2 = 0;
for (n1 = 0; n1 < strlen(packet.param_id); n1++) {
if (packet.param_id[n1] != 9 && packet.param_id[n1] != ' ' && packet.param_id[n1] != '\t') {
var[n2++] = packet.param_id[n1];
}
}
var[n2++] = 0;
// MAV_VAR_FLOAT=0, /* 32 bit float | */
// MAV_VAR_UINT8=1, /* 8 bit unsigned integer | */
// MAV_VAR_INT8=2, /* 8 bit signed integer | */
// MAV_VAR_UINT16=3, /* 16 bit unsigned integer | */
// MAV_VAR_INT16=4, /* 16 bit signed integer | */
// MAV_VAR_UINT32=5, /* 32 bit unsigned integer | */
// MAV_VAR_INT32=6, /* 32 bit signed integer | */
sprintf(sysmsg_str, "PARAM_VALUE (%i/%i): #%s# = %f (Type: %i)", packet.param_index + 1, packet.param_count, var, packet.param_value, packet.param_type);
SDL_Log("mavlink: %s\n", sysmsg_str);
sys_message(sysmsg_str);
mavlink_maxparam = packet.param_count;
mavlink_timeout = 0;
mavlink_set_value(var, packet.param_value, packet.param_type, packet.param_index);
if (packet.param_index + 1 == packet.param_count || packet.param_index % 10 == 0) {
mavlink_param_xml_meta_load();
}
redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_MISSION_COUNT: {
mavlink_mission_count_t packet;
mavlink_msg_mission_count_decode(msg, &packet);
sprintf(sysmsg_str, "MISSION_COUNT: %i\n", packet.count);
sys_message(sysmsg_str);
mission_max = packet.count;
if (mission_max > 0) {
mavlink_msg_mission_request_pack(127, 0, &msg2, ModelData.sysid, ModelData.compid, 0);
mavlink_send_message(&msg2);
}
redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_MISSION_ACK: {
SDL_Log("mavlink: Mission-Transfer ACK\n");
break;
}
case MAVLINK_MSG_ID_MISSION_REQUEST: {
mavlink_mission_request_t packet;
mavlink_msg_mission_request_decode(msg, &packet);
uint16_t id = packet.seq;
uint16_t id2 = packet.seq;
uint16_t type = 0;
if (ModelData.teletype == TELETYPE_MEGAPIRATE_NG || ModelData.teletype == TELETYPE_ARDUPILOT) {
if (id2 > 0) {
id2 = id2 - 1;
} else {
SDL_Log("mavlink: WORKAROUND: first WP == HOME ?\n");
}
}
sprintf(sysmsg_str, "sending Waypoint (%i): %s\n", id, WayPoints[1 + id2].name);
sys_message(sysmsg_str);
if (strcmp(WayPoints[1 + id2].command, "WAYPOINT") == 0) {
SDL_Log("mavlink: Type: MAV_CMD_NAV_WAYPOINT\n");
type = MAV_CMD_NAV_WAYPOINT;
} else if (strcmp(WayPoints[1 + id2].command, "RTL") == 0) {
SDL_Log("mavlink: Type: MAV_CMD_NAV_RETURN_TO_LAUNCH\n");
type = MAV_CMD_NAV_RETURN_TO_LAUNCH;
} else if (strcmp(WayPoints[1 + id2].command, "LAND") == 0) {
SDL_Log("mavlink: Type: MAV_CMD_NAV_LAND\n");
type = MAV_CMD_NAV_LAND;
} else if (strcmp(WayPoints[1 + id2].command, "TAKEOFF") == 0) {
SDL_Log("mavlink: Type: MAV_CMD_NAV_TAKEOFF\n");
type = MAV_CMD_NAV_TAKEOFF;
} else {
SDL_Log("mavlink: Type: UNKNOWN\n");
type = MAV_CMD_NAV_WAYPOINT;
}
sprintf(sysmsg_str, "SENDING MISSION_ITEM: %i: %f, %f, %f\n", id, WayPoints[1 + id2].p_lat, WayPoints[1 + id2].p_long, WayPoints[1 + id2].p_alt);
SDL_Log("mavlink: %s\n", sysmsg_str);
mavlink_msg_mission_item_pack(127, 0, &msg2, ModelData.sysid, ModelData.compid, id, 0, type, 0.0, 0.0, WayPoints[1 + id2].radius, WayPoints[1 + id2].wait, WayPoints[1 + id2].orbit, WayPoints[1 + id2].yaw, WayPoints[1 + id2].p_lat, WayPoints[1 + id2].p_long, WayPoints[1 + id2].p_alt);
mavlink_send_message(&msg2);
/*
mavlink_msg_mission_item_pack(system_id, component_id, &msg , packet1.target_system , packet1.target_component , packet1.seq , packet1.frame , packet1.command , packet1.current , packet1.autocontinue , packet1.param1 , packet1.param2 , packet1.param3 , packet1.param4 , packet1.x , packet1.y , packet1.z );
float param1; ///< PARAM1 / For NAV command MISSIONs: Radius in which the MISSION is accepted as reached, in meters
float param2; ///< PARAM2 / For NAV command MISSIONs: Time that the MAV should stay inside the PARAM1 radius before advancing, in milliseconds
float param3; ///< PARAM3 / For LOITER command MISSIONs: Orbit to circle around the MISSION, in meters. If positive the orbit direction should be clockwise, if negative the orbit direction should be counter-clockwise.
float param4; ///< PARAM4 / For NAV and LOITER command MISSIONs: Yaw orientation in degrees, [0..360] 0 = NORTH
float x; ///< PARAM5 / local: x position, global: latitude
float y; ///< PARAM6 / y position: global: longitude
float z; ///< PARAM7 / z position: global: altitude
uint16_t seq; ///< Sequence
uint16_t command; ///< The scheduled action for the MISSION. see MAV_CMD in common.xml MAVLink specs
uint8_t target_system; ///< System ID
uint8_t target_component; ///< Component ID
uint8_t frame; ///< The coordinate system of the MISSION. see MAV_FRAME in mavlink_types.h
uint8_t current; ///< false:0, true:1
uint8_t autocontinue; ///< autocontinue to next wp
*/
redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_MISSION_ITEM: {
mavlink_mission_item_t packet;
mavlink_msg_mission_item_decode(msg, &packet);
sprintf(sysmsg_str, "RECEIVED MISSION_ITEM: %i/%i: %f, %f, %f (%i)\n", packet.seq, mission_max, packet.x, packet.y, packet.z, packet.frame);
SDL_Log("mavlink: %s\n", sysmsg_str);
sys_message(sysmsg_str);
if (packet.seq < mission_max - 1) {
mavlink_msg_mission_request_pack(127, 0, &msg2, ModelData.sysid, ModelData.compid, packet.seq + 1);
mavlink_send_message(&msg2);
} else {
mavlink_msg_mission_ack_pack(127, 0, &msg2, ModelData.sysid, ModelData.compid, 15);
mavlink_send_message(&msg2);
}
if (ModelData.teletype == TELETYPE_MEGAPIRATE_NG || ModelData.teletype == TELETYPE_ARDUPILOT) {
if (packet.seq > 0) {
packet.seq = packet.seq - 1;
} else {
SDL_Log("mavlink: WORKAROUND: ignore first WP\n");
break;
}
}
SDL_Log("mavlink: getting WP(%i): %f, %f\n", packet.seq, packet.x, packet.y);
switch (packet.command) {
case MAV_CMD_NAV_WAYPOINT: {
strcpy(WayPoints[1 + packet.seq].command, "WAYPOINT");
break;
}
case MAV_CMD_NAV_LOITER_UNLIM: {
strcpy(WayPoints[1 + packet.seq].command, "LOITER_UNLIM");
break;
}
case MAV_CMD_NAV_LOITER_TURNS: {
strcpy(WayPoints[1 + packet.seq].command, "LOITER_TURNS");
break;
}
case MAV_CMD_NAV_LOITER_TIME: {
strcpy(WayPoints[1 + packet.seq].command, "LOITER_TIME");
break;
}
case MAV_CMD_NAV_RETURN_TO_LAUNCH: {
strcpy(WayPoints[1 + packet.seq].command, "RTL");
break;
}
case MAV_CMD_NAV_LAND: {
strcpy(WayPoints[1 + packet.seq].command, "LAND");
break;
}
case MAV_CMD_NAV_TAKEOFF: {
strcpy(WayPoints[1 + packet.seq].command, "TAKEOFF");
break;
}
default: {
sprintf(WayPoints[1 + packet.seq].command, "CMD:%i", packet.command);
break;
}
}
if (packet.x == 0.0) {
packet.x = 0.00001;
}
if (packet.y == 0.0) {
packet.y = 0.00001;
}
if (packet.z == 0.0) {
packet.z = 0.00001;
}
WayPoints[1 + packet.seq].p_lat = packet.x;
WayPoints[1 + packet.seq].p_long = packet.y;
WayPoints[1 + packet.seq].p_alt = packet.z;
WayPoints[1 + packet.seq].yaw = packet.param4;
sprintf(WayPoints[1 + packet.seq].name, "WP%i", packet.seq + 1);
WayPoints[1 + packet.seq + 1].p_lat = 0.0;
WayPoints[1 + packet.seq + 1].p_long = 0.0;
WayPoints[1 + packet.seq + 1].p_alt = 0.0;
WayPoints[1 + packet.seq + 1].yaw = 0.0;
WayPoints[1 + packet.seq + 1].name[0] = 0;
WayPoints[1 + packet.seq + 1].command[0] = 0;
/*
float param1; ///< PARAM1 / For NAV command MISSIONs: Radius in which the MISSION is accepted as reached, in meters
float param2; ///< PARAM2 / For NAV command MISSIONs: Time that the MAV should stay inside the PARAM1 radius before advancing, in milliseconds
float param3; ///< PARAM3 / For LOITER command MISSIONs: Orbit to circle around the MISSION, in meters. If positive the orbit direction should be clockwise, if negative the orbit direction should be counter-clockwise.
float param4; ///< PARAM4 / For NAV and LOITER command MISSIONs: Yaw orientation in degrees, [0..360] 0 = NORTH
float x; ///< PARAM5 / local: x position, global: latitude
float y; ///< PARAM6 / y position: global: longitude
float z; ///< PARAM7 / z position: global: altitude
uint16_t seq; ///< Sequence
uint16_t command; ///< The scheduled action for the MISSION. see MAV_CMD in common.xml MAVLink specs
uint8_t target_system; ///< System ID
uint8_t target_component; ///< Component ID
uint8_t frame; ///< The coordinate system of the MISSION. see MAV_FRAME in mavlink_types.h
uint8_t current; ///< false:0, true:1
uint8_t autocontinue; ///< autocontinue to next wp
GCS_MAVLink/message_definitions_v1.0/common.xml: <entry value="0" name="MAV_FRAME_GLOBAL">
GCS_MAVLink/message_definitions_v1.0/common.xml: <entry value="1" name="MAV_FRAME_LOCAL_NED">
GCS_MAVLink/message_definitions_v1.0/common.xml: <entry value="2" name="MAV_FRAME_MISSION">
GCS_MAVLink/message_definitions_v1.0/common.xml: <entry value="3" name="MAV_FRAME_GLOBAL_RELATIVE_ALT">
GCS_MAVLink/message_definitions_v1.0/common.xml: <entry value="4" name="MAV_FRAME_LOCAL_ENU">
*/
redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_MISSION_CURRENT: {
mavlink_mission_current_t packet;
mavlink_msg_mission_current_decode(msg, &packet);
// SDL_Log("mavlink: ## Active_WP %f ##\n", packet.seq);
uav_active_waypoint = (uint8_t)packet.seq;
break;
}
case MAVLINK_MSG_ID_RAW_IMU: {
mavlink_raw_imu_t packet;
mavlink_msg_raw_imu_decode(msg, &packet);
/*
SDL_Log("## IMU_RAW_ACC_X %i ##\n", packet.xacc);
SDL_Log("## IMU_RAW_ACC_Y %i ##\n", packet.yacc);
SDL_Log("## IMU_RAW_ACC_Z %i ##\n", packet.zacc);
SDL_Log("## IMU_RAW_GYRO_X %i ##\n", packet.xgyro);
SDL_Log("## IMU_RAW_GYRO_Y %i ##\n", packet.ygyro);
SDL_Log("## IMU_RAW_GYRO_Z %i ##\n", packet.zgyro);
SDL_Log("## IMU_RAW_MAG_X %i ##\n", packet.xmag);
SDL_Log("## IMU_RAW_MAG_Y %i ##\n", packet.ymag);
SDL_Log("## IMU_RAW_MAG_Z %i ##\n", packet.zmag);
*/
ModelData.acc_x = (float)packet.xacc / 1000.0;
ModelData.acc_y = (float)packet.yacc / 1000.0;
ModelData.acc_z = (float)packet.zacc / 1000.0;
ModelData.gyro_x = (float)packet.zgyro;
ModelData.gyro_y = (float)packet.zgyro;
ModelData.gyro_z = (float)packet.zgyro;
redraw_flag = 1;
break;
}
case MAVLINK_MSG_ID_NAV_CONTROLLER_OUTPUT: {
mavlink_nav_controller_output_t packet;
mavlink_msg_nav_controller_output_decode(msg, &packet);
/*
nav_roll
nav_pitch
alt_error
aspd_error
xtrack_error
nav_bearing
target_bearing
wp_dist
*/
break;
}
case MAVLINK_MSG_ID_VFR_HUD: {
mavlink_vfr_hud_t packet;
mavlink_msg_vfr_hud_decode(msg, &packet);
// SDL_Log("## pa %f ##\n", packet.airspeed);
// SDL_Log("## pg %f ##\n", packet.groundspeed);
// SDL_Log("## palt %f ##\n", packet.alt);
if (GPS_found == 0) {
ModelData.p_alt = packet.alt;
}
// SDL_Log("## pc %f ##\n", packet.climb);
// SDL_Log("## ph %i ##\n", packet.heading);
// SDL_Log("## pt %i ##\n", packet.throttle);
break;
}
case MAVLINK_MSG_ID_RADIO: {
mavlink_radio_t packet;
mavlink_msg_radio_decode(msg, &packet);
SDL_Log("mavlink: ## rxerrors %i ##\n", packet.rxerrors);
SDL_Log("mavlink: ## fixed %i ##\n", packet.fixed);
SDL_Log("mavlink: ## rssi %i ##\n", packet.rssi);
SDL_Log("mavlink: ## remrssi %i ##\n", packet.remrssi);
SDL_Log("mavlink: ## txbuf %i ##\n", packet.txbuf);
SDL_Log("mavlink: ## noise %i ##\n", packet.noise);
SDL_Log("mavlink: ## remnoise %i ##\n", packet.remnoise);
break;
}
default: {
// SDL_Log(" ## MSG_ID == %i ##\n", msg->msgid);
break;
}
}
}
void mission_read_waypoint_list(void)
{
uint32_t start_time, cur_time;
waypoint_t *cur_wp = waypoint_info.waypoint_list; //First node of the waypoint list
mavlink_mission_request_t mmrt;
mavlink_msg_mission_count_pack(
1, 0, &msg, 255, 0, waypoint_info.waypoint_count /* Waypoint count */
);
send_package(&msg);
int i;
for(i = 0; i < waypoint_info.waypoint_count; i++) {
start_time = get_system_time_ms();
/* Waiting for mission request command */
while(received_msg.msgid != 40) {
cur_time = get_system_time_ms();
//Suspend the task to read the new message
vTaskDelay(100);
/* Time out, leave */
if((cur_time - start_time) > TIMEOUT_CNT)
return;
}
/* Waiting for mission request command */
mavlink_msg_mission_request_decode(&received_msg, &mmrt);
/* Clear the received message */
clear_message_id(&received_msg);
/* Send the waypoint to the ground station */
mavlink_msg_mission_item_pack(
1, 0, &msg, 255, 0,
cur_wp->data.seq,
cur_wp->data.frame,
cur_wp->data.command,
cur_wp->data.current,
cur_wp->data.autocontinue,
cur_wp->data.param1,
cur_wp->data.param2,
cur_wp->data.param3,
cur_wp->data.param4,
cur_wp->data.x,
cur_wp->data.y,
cur_wp->data.z
);
send_package(&msg);
cur_wp = cur_wp->next;
}
/* Send a mission ack Message at the end */
mavlink_msg_mission_ack_pack(1, 0, &msg, 255, 0, 0);
send_package(&msg);
}
