static int ali_configure(void)
{
u32 temp;
struct aper_size_info_32 *current_size;
current_size = A_SIZE_32(agp_bridge->current_size);
/* aperture size and gatt addr */
pci_read_config_dword(agp_bridge->dev, ALI_ATTBASE, &temp);
temp = (((temp & 0x00000ff0) | (agp_bridge->gatt_bus_addr & 0xfffff000))
| (current_size->size_value & 0xf));
pci_write_config_dword(agp_bridge->dev, ALI_ATTBASE, temp);
/* tlb control */
pci_read_config_dword(agp_bridge->dev, ALI_TLBCTRL, &temp);
pci_write_config_dword(agp_bridge->dev, ALI_TLBCTRL, ((temp & 0xffffff00) | 0x00000010));
/* address to map to */
agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
AGP_APERTURE_BAR);
#if 0
if (agp_bridge->type == ALI_M1541) {
u32 nlvm_addr = 0;
switch (current_size->size_value) {
case 0: break;
case 1: nlvm_addr = 0x100000;break;
case 2: nlvm_addr = 0x200000;break;
case 3: nlvm_addr = 0x400000;break;
case 4: nlvm_addr = 0x800000;break;
case 6: nlvm_addr = 0x1000000;break;
case 7: nlvm_addr = 0x2000000;break;
case 8: nlvm_addr = 0x4000000;break;
case 9: nlvm_addr = 0x8000000;break;
case 10: nlvm_addr = 0x10000000;break;
default: break;
}
nlvm_addr--;
nlvm_addr&=0xfff00000;
nlvm_addr+= agp_bridge->gart_bus_addr;
nlvm_addr|=(agp_bridge->gart_bus_addr>>12);
dev_info(&agp_bridge->dev->dev, "nlvm top &base = %8x\n",
nlvm_addr);
}
static int via_configure(void)
{
struct aper_size_info_8 *current_size;
current_size = A_SIZE_8(agp_bridge->current_size);
/* aperture size */
pci_write_config_byte(agp_bridge->dev, VIA_APSIZE,
current_size->size_value);
/* address to map to */
agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
AGP_APERTURE_BAR);
/* GART control register */
pci_write_config_dword(agp_bridge->dev, VIA_GARTCTRL, 0x0000000f);
/* attbase - aperture GATT base */
pci_write_config_dword(agp_bridge->dev, VIA_ATTBASE,
(agp_bridge->gatt_bus_addr & 0xfffff000) | 3);
return 0;
}
static int via_configure_agp3(void)
{
u32 temp;
struct aper_size_info_16 *current_size;
current_size = A_SIZE_16(agp_bridge->current_size);
/* address to map to */
agp_bridge->gart_bus_addr = pci_bus_address(agp_bridge->dev,
AGP_APERTURE_BAR);
/* attbase - aperture GATT base */
pci_write_config_dword(agp_bridge->dev, VIA_AGP3_ATTBASE,
agp_bridge->gatt_bus_addr & 0xfffff000);
/* 1. Enable GTLB in RX90<7>, all AGP aperture access needs to fetch
* translation table first.
* 2. Enable AGP aperture in RX91<0>. This bit controls the enabling of the
* graphics AGP aperture for the AGP3.0 port.
*/
pci_read_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, &temp);
pci_write_config_dword(agp_bridge->dev, VIA_AGP3_GARTCTRL, temp | (3<<7));
return 0;
}
static int ati_create_gatt_table(struct agp_bridge_data *bridge)
{
struct aper_size_info_lvl2 *value;
struct ati_page_map page_dir;
unsigned long __iomem *cur_gatt;
unsigned long addr;
int retval;
u32 temp;
int i;
struct aper_size_info_lvl2 *current_size;
value = A_SIZE_LVL2(agp_bridge->current_size);
retval = ati_create_page_map(&page_dir);
if (retval != 0)
return retval;
retval = ati_create_gatt_pages(value->num_entries / 1024);
if (retval != 0) {
ati_free_page_map(&page_dir);
return retval;
}
agp_bridge->gatt_table_real = (u32 *)page_dir.real;
agp_bridge->gatt_table = (u32 __iomem *) page_dir.remapped;
agp_bridge->gatt_bus_addr = virt_to_phys(page_dir.real);
/* Write out the size register */
current_size = A_SIZE_LVL2(agp_bridge->current_size);
if (is_r200()) {
pci_read_config_dword(agp_bridge->dev, ATI_RS100_APSIZE, &temp);
temp = (((temp & ~(0x0000000e)) | current_size->size_value)
| 0x00000001);
pci_write_config_dword(agp_bridge->dev, ATI_RS100_APSIZE, temp);
pci_read_config_dword(agp_bridge->dev, ATI_RS100_APSIZE, &temp);
} else {
pci_read_config_dword(agp_bridge->dev, ATI_RS300_APSIZE, &temp);
temp = (((temp & ~(0x0000000e)) | current_size->size_value)
| 0x00000001);
pci_write_config_dword(agp_bridge->dev, ATI_RS300_APSIZE, temp);
pci_read_config_dword(agp_bridge->dev, ATI_RS300_APSIZE, &temp);
}
/*
* Get the address for the gart region.
* This is a bus address even on the alpha, b/c its
* used to program the agp master not the cpu
*/
addr = pci_bus_address(agp_bridge->dev, AGP_APERTURE_BAR);
agp_bridge->gart_bus_addr = addr;
/* Calculate the agp offset */
for (i = 0; i < value->num_entries / 1024; i++, addr += 0x00400000) {
writel(virt_to_phys(ati_generic_private.gatt_pages[i]->real) | 1,
page_dir.remapped+GET_PAGE_DIR_OFF(addr));
readl(page_dir.remapped+GET_PAGE_DIR_OFF(addr)); /* PCI Posting. */
}
for (i = 0; i < value->num_entries; i++) {
addr = (i * PAGE_SIZE) + agp_bridge->gart_bus_addr;
cur_gatt = GET_GATT(addr);
writel(agp_bridge->scratch_page, cur_gatt+GET_GATT_OFF(addr));
}
return 0;
}
