Beispiel #1
0
static int usbhs_hardware_init(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);
	struct usb_phy *phy;
	int ret;

	/* USB0 Function - use PWEN as GPIO input to detect DIP Switch SW5
	 * setting to avoid VBUS short circuit due to wrong cable.
	 * PWEN should be pulled up high if USB Function is selected by SW5
	 */
	gpio_request_one(RCAR_GP_PIN(5, 18), GPIOF_IN, NULL); /* USB0_PWEN */
	if (!gpio_get_value(RCAR_GP_PIN(5, 18))) {
		pr_warn("Error: USB Function not selected - check SW5 + SW6\n");
		ret = -ENOTSUPP;
		goto error;
	}

	phy = usb_get_phy_dev(&pdev->dev, 0);
	if (IS_ERR(phy)) {
		ret = PTR_ERR(phy);
		goto error;
	}

	priv->phy = phy;
	return 0;
 error:
	gpio_free(RCAR_GP_PIN(5, 18));
	return ret;
}
Beispiel #2
0
static void usbhs_phy_reset(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	/* init phy */
	__raw_writew(0x8a0a, priv->usbcrcaddr);
}
static int usbhs0_hardware_exit(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	cancel_delayed_work_sync(&priv->work);

	return 0;
}
Beispiel #4
0
static void usbhs1_hardware_exit(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	/* clear interrupt status */
	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);

	free_irq(IRQ8, pdev);
}
Beispiel #5
0
static int usbhs0_hardware_init(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	priv->pdev = pdev;
	INIT_DELAYED_WORK(&priv->work, usbhs0_work_function);
	schedule_delayed_work(&priv->work, USBHS0_POLL_INTERVAL);
	return 0;
}
Beispiel #6
0
static int usbhs_phy_reset(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	/* init phy */
	__raw_writew(0x8a0a, priv->cr2);

	return 0;
}
Beispiel #7
0
static int usbhs_hardware_exit(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	/* clear interrupt status */
	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->phy);

	free_irq(IRQ15, pdev);

	return 0;
}
Beispiel #8
0
static irqreturn_t usbhs_interrupt(int irq, void *data)
{
	struct platform_device *pdev = data;
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	renesas_usbhs_call_notify_hotplug(pdev);

	/* clear status */
	__raw_writew(__raw_readw(priv->phy) | USB_PHY_INT_CLR, priv->phy);

	return IRQ_HANDLED;
}
Beispiel #9
0
static int usbhs_hardware_exit(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	if (!priv->phy)
		return 0;

	usb_put_phy(priv->phy);
	priv->phy = NULL;

	gpio_free(RCAR_GP_PIN(5, 18));
	return 0;
}
Beispiel #10
0
static irqreturn_t usbhs1_interrupt(int irq, void *data)
{
	struct platform_device *pdev = data;
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	dev_dbg(&pdev->dev, "%s\n", __func__);

	renesas_usbhs_call_notify_hotplug(pdev);

	/* clear status */
	__raw_writew(__raw_readw(priv->usbphyaddr) | USB_PHY_INT_CLR,
		     priv->usbphyaddr);

	return IRQ_HANDLED;
}
Beispiel #11
0
static int usbhs1_hardware_init(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);
	int ret;

	/* clear interrupt status */
	__raw_writew(USB_PHY_MODE | USB_PHY_INT_CLR, priv->usbphyaddr);

	ret = request_irq(IRQ8, usbhs1_interrupt, IRQF_TRIGGER_HIGH,
			  dev_name(&pdev->dev), pdev);
	if (ret) {
		dev_err(&pdev->dev, "request_irq err\n");
		return ret;
	}

	/* enable USB phy interrupt */
	__raw_writew(USB_PHY_MODE | USB_PHY_INT_EN, priv->usbphyaddr);

	return 0;
}
Beispiel #12
0
static int usbhs_power_ctrl(struct platform_device *pdev,
				void __iomem *base, int enable)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	if (!priv->phy)
		return -ENODEV;

	if (enable) {
		int retval = usb_phy_init(priv->phy);

		if (!retval)
			retval = usb_phy_set_suspend(priv->phy, 0);
		return retval;
	}

	usb_phy_set_suspend(priv->phy, 1);
	usb_phy_shutdown(priv->phy);
	return 0;
}
Beispiel #13
0
static int usbhs_get_vbus(struct platform_device *pdev)
{
	return usbhs_is_connected(usbhs_get_priv(pdev));
}
Beispiel #14
0
static int usbhs_get_vbus(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	return !((1 << 7) & __raw_readw(priv->cr2));
}
static void __init koelsch_add_rsnd_device(void)
{
	struct resource rsnd_resources[] = {
		[RSND_GEN2_SCU]  = DEFINE_RES_MEM(0xec500000, 0x1000),
		[RSND_GEN2_ADG]  = DEFINE_RES_MEM(0xec5a0000, 0x100),
		[RSND_GEN2_SSIU] = DEFINE_RES_MEM(0xec540000, 0x1000),
		[RSND_GEN2_SSI]  = DEFINE_RES_MEM(0xec541000, 0x1280),
	};

	struct platform_device_info cardinfo = {
		.parent         = &platform_bus,
		.name           = "asoc-simple-card",
		.id             = -1,
		.data           = &rsnd_card_info,
		.size_data      = sizeof(struct asoc_simple_card_info),
		.dma_mask       = DMA_BIT_MASK(32),
	};

	platform_device_register_resndata(
		&platform_bus, "rcar_sound", -1,
		rsnd_resources, ARRAY_SIZE(rsnd_resources),
		&rsnd_info, sizeof(rsnd_info));

	platform_device_register_full(&cardinfo);
}

/*
 * This is a really crude hack to provide clkdev support to platform
 * devices until they get moved to DT.
 */
static const struct clk_name clk_names[] __initconst = {
	{ "cmt0", NULL, "sh_cmt.0" },
	{ "cmt0", "fck", "sh-cmt-48-gen2.0" },
	{ "du0", "du.0", "rcar-du-r8a7791" },
	{ "du1", "du.1", "rcar-du-r8a7791" },
	{ "lvds0", "lvds.0", "rcar-du-r8a7791" },
	{ "hsusb", NULL, "usb_phy_rcar_gen2" },
	{ "ssi0", "ssi.0", "rcar_sound" },
	{ "ssi1", "ssi.1", "rcar_sound" },
	{ "src0", "src.0", "rcar_sound" },
	{ "src1", "src.1", "rcar_sound" },
	{ "dvc0", "dvc.0", "rcar_sound" },
	{ "vin0", NULL, "r8a7791-vin.0" },
	{ "vin1", NULL, "r8a7791-vin.1" },
	{ "vsps", NULL, NULL },
#if defined(CONFIG_VIDEO_RENESAS_VSP1)
	{ "vsp1-du0", NULL, "vsp1.2" },
	{ "vsp1-du1", NULL, "vsp1.3" },
#else
	{ "vsp1-du0", NULL, NULL },
	{ "vsp1-du1", NULL, NULL },
#endif
	{ "vcp0", NULL, NULL },
	{ "vpc0", NULL, NULL },
	{ "tddmac", NULL, NULL },
	{ "fdp1", NULL, NULL },
	{ "fdp0", NULL, NULL },
};

/*
 * This is a really crude hack to work around core platform clock issues
 */
static const struct clk_name clk_enables[] __initconst = {
	{ "hsusb", NULL, "renesas_usbhs" },
	{ "ehci", NULL, "pci-rcar-gen2.1" },
	{ "ssi", NULL, "rcar_sound" },
	{ "scu", NULL, "rcar_sound" },
	{ "dmal", NULL, "sh-dma-engine.0" },
	{ "dmah", NULL, "sh-dma-engine.1" },
	{ "pvrsrvkm", NULL, "pvrsrvkm" },
	{ "ssp_dev", NULL, "ssp_dev" },
};

#define DMAE_CHANNEL(a, b)			\
{						\
	.offset		= (a) - 0x20,		\
	.dmars		= (a) - 0x20 + 0x40,	\
	.chclr_bit	= (b),			\
	.chclr_offset	= 0x80 - 0x20,		\
}

/* Sys-DMAC */
#define SYS_DMAC_SLAVE(_id, _bit, _addr, toffset, roffset, t, r)	\
{								\
	.slave_id	= SYS_DMAC_SLAVE_## _id ##_TX,		\
	.addr		= _addr + toffset,			\
	.chcr		= CHCR_TX(XMIT_SZ_## _bit ##BIT),	\
	.mid_rid	= t,					\
}, {								\
	.slave_id	= SYS_DMAC_SLAVE_## _id ##_RX,		\
	.addr		= _addr + roffset,			\
	.chcr		= CHCR_RX(XMIT_SZ_## _bit ##BIT),	\
	.mid_rid	= r,					\
}

static const struct sh_dmae_slave_config r8a7791_sys_dmac_slaves[] = {
	SYS_DMAC_SLAVE(SDHI0, 256, 0xee100000, 0x60, 0x2060, 0xcd, 0xce),
	SYS_DMAC_SLAVE(SDHI1, 256, 0xee140000, 0x30, 0x2030, 0xc1, 0xc2),
	SYS_DMAC_SLAVE(SDHI2, 256, 0xee160000, 0x30, 0x2030, 0xd3, 0xd4),
};

static const struct sh_dmae_channel r8a7791_sys_dmac_channels[] = {
	DMAE_CHANNEL(0x8000, 0),
	DMAE_CHANNEL(0x8080, 1),
	DMAE_CHANNEL(0x8100, 2),
	DMAE_CHANNEL(0x8180, 3),
	DMAE_CHANNEL(0x8200, 4),
	DMAE_CHANNEL(0x8280, 5),
	DMAE_CHANNEL(0x8300, 6),
	DMAE_CHANNEL(0x8380, 7),
	DMAE_CHANNEL(0x8400, 8),
	DMAE_CHANNEL(0x8480, 9),
	DMAE_CHANNEL(0x8500, 10),
	DMAE_CHANNEL(0x8580, 11),
	DMAE_CHANNEL(0x8600, 12),
	DMAE_CHANNEL(0x8680, 13),
	DMAE_CHANNEL(0x8700, 14),
};

static struct sh_dmae_pdata r8a7791_sys_dmac_platform_data = {
	.slave		= r8a7791_sys_dmac_slaves,
	.slave_num	= ARRAY_SIZE(r8a7791_sys_dmac_slaves),
	.channel	= r8a7791_sys_dmac_channels,
	.channel_num	= ARRAY_SIZE(r8a7791_sys_dmac_channels),
	.ts_low_shift	= TS_LOW_SHIFT,
	.ts_low_mask	= TS_LOW_BIT << TS_LOW_SHIFT,
	.ts_high_shift	= TS_HI_SHIFT,
	.ts_high_mask	= TS_HI_BIT << TS_HI_SHIFT,
	.ts_shift	= dma_ts_shift,
	.ts_shift_num	= ARRAY_SIZE(dma_ts_shift),
	.dmaor_init	= DMAOR_DME,
	.chclr_present	= 1,
	.chclr_bitwise	= 1,
	.fourty_bits_addr = 1,
};

static struct resource r8a7791_sys_dmac_resources[] = {
	/* Channel registers and DMAOR for low */
	DEFINE_RES_MEM(0xe6700020, 0x8763 - 0x20),
	DEFINE_RES_IRQ(gic_spi(197)),
	DEFINE_RES_NAMED(gic_spi(200), 15, NULL, IORESOURCE_IRQ),

	/* Channel registers and DMAOR for high */
	DEFINE_RES_MEM(0xe6720020, 0x8763 - 0x20),
	DEFINE_RES_IRQ(gic_spi(220)),
	DEFINE_RES_NAMED(gic_spi(216), 4, NULL, IORESOURCE_IRQ),
	DEFINE_RES_NAMED(gic_spi(308), 11, NULL, IORESOURCE_IRQ),
};

#define r8a7791_register_sys_dmac(id)				\
	platform_device_register_resndata(			\
		&platform_bus, "sh-dma-engine", 2 + id,		\
		&r8a7791_sys_dmac_resources[id * 3],	id * 1 + 3,	\
		&r8a7791_sys_dmac_platform_data,		\
		sizeof(r8a7791_sys_dmac_platform_data))

static void __init koelsch_add_dmac_prototype(void)
{
	r8a7791_register_sys_dmac(0);
	r8a7791_register_sys_dmac(1);
}

static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
	.dma_slave_tx   = SYS_DMAC_SLAVE_SDHI0_TX,
	.dma_slave_rx   = SYS_DMAC_SLAVE_SDHI0_RX,
	.dma_rx_offset  = 0x2000,

	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
			  MMC_CAP_POWER_OFF_CARD,
	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
};

static struct sh_mobile_sdhi_info sdhi1_info __initdata = {
	.dma_slave_tx   = SYS_DMAC_SLAVE_SDHI1_TX,
	.dma_slave_rx   = SYS_DMAC_SLAVE_SDHI1_RX,
	.tmio_caps	= MMC_CAP_POWER_OFF_CARD,
	.dma_rx_offset  = 0x2000,

	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
			  MMC_CAP_POWER_OFF_CARD,
	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
};

static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
	.dma_slave_tx   = SYS_DMAC_SLAVE_SDHI2_TX,
	.dma_slave_rx   = SYS_DMAC_SLAVE_SDHI2_RX,
	.dma_rx_offset  = 0x2000,

	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
			  MMC_CAP_POWER_OFF_CARD,
	.tmio_caps	= MMC_CAP_POWER_OFF_CARD,
	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |
			  TMIO_MMC_WRPROTECT_DISABLE,
};

/* USBHS */
static const struct resource usbhs_resources[] __initconst = {
	DEFINE_RES_MEM(0xe6590000, 0x100),
	DEFINE_RES_IRQ(gic_spi(107)),
};

struct usbhs_private {
	struct renesas_usbhs_platform_info info;
	struct usb_phy *phy;
	int id_gpio;
};

#define usbhs_get_priv(pdev) \
	container_of(renesas_usbhs_get_info(pdev), struct usbhs_private, info)

static int usbhs_power_ctrl(struct platform_device *pdev,
                               void __iomem *base, int enable)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	if (!priv->phy)
		return -ENODEV;

	if (enable) {
		int retval = usb_phy_init(priv->phy);

		if (!retval)
			retval = usb_phy_set_suspend(priv->phy, 0);
		return retval;
	}

	usb_phy_set_suspend(priv->phy, 1);
	usb_phy_shutdown(priv->phy);
	return 0;
}

static int usbhs_hardware_init(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);
	struct usb_phy *phy;
	int ret;
	struct device_node *np;

	np = of_find_node_by_path("/gpio@e6055000");
	if (np) {
		priv->id_gpio = of_get_gpio(np, 31);
		of_node_put(np);
	} else {
		pr_warn("Error: Unable to get MAX3355 ID input\n");
		ret = -ENOTSUPP;
		goto error2;
	}

	/* Check MAX3355E ID pin */
	gpio_request_one(priv->id_gpio, GPIOF_IN, NULL);
	if (!gpio_get_value(priv->id_gpio)) {
		pr_warn("Error: USB0 cable selects host mode\n");
		ret = -ENOTSUPP;
		goto error;
	}

	phy = usb_get_phy_dev(&pdev->dev, 0);
	if (IS_ERR(phy))
		return PTR_ERR(phy);

	priv->phy = phy;
	return 0;

error:
	gpio_free(priv->id_gpio);
error2:
	return ret;
}

static int usbhs_hardware_exit(struct platform_device *pdev)
{
	struct usbhs_private *priv = usbhs_get_priv(pdev);

	if (!priv->phy)
		return 0;

	usb_put_phy(priv->phy);
	priv->phy = NULL;

	gpio_free(priv->id_gpio);
	return 0;
}

static int usbhs_get_id(struct platform_device *pdev)
{
	return USBHS_GADGET;
}

static u32 koelsch_usbhs_pipe_type[] = {
	USB_ENDPOINT_XFER_CONTROL,
	USB_ENDPOINT_XFER_ISOC,
	USB_ENDPOINT_XFER_ISOC,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_INT,
	USB_ENDPOINT_XFER_INT,
	USB_ENDPOINT_XFER_INT,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
	USB_ENDPOINT_XFER_BULK,
};

static struct usbhs_private usbhs_priv __initdata = {
	.info = {
		.platform_callback = {
			.power_ctrl	= usbhs_power_ctrl,
			.hardware_init	= usbhs_hardware_init,
			.hardware_exit	= usbhs_hardware_exit,
			.get_id		= usbhs_get_id,
		},
		.driver_param = {
			.buswait_bwait	= 4,
			.pipe_type	= koelsch_usbhs_pipe_type,
			.pipe_size	= ARRAY_SIZE(koelsch_usbhs_pipe_type),
		},
	}
};

static void __init koelsch_add_usb0_gadget(void)
{
	usb_bind_phy("renesas_usbhs", 0, "usb_phy_rcar_gen2");
	platform_device_register_resndata(&platform_bus,
					  "renesas_usbhs", -1,
					  usbhs_resources,
					  ARRAY_SIZE(usbhs_resources),
					  &usbhs_priv.info,
					  sizeof(usbhs_priv.info));
}

/* Internal PCI1 */
static const struct resource pci1_resources[] __initconst = {
	DEFINE_RES_MEM(0xee0d0000, 0x10000),    /* CFG */
	DEFINE_RES_MEM(0xee0c0000, 0x10000),    /* MEM */
	DEFINE_RES_IRQ(gic_spi(113)),
};

static void __init koelsch_add_usb1_host(void)
{
	platform_device_register_simple("pci-rcar-gen2",
					1, pci1_resources,
					ARRAY_SIZE(pci1_resources));
}

/* USBHS PHY */
static const struct rcar_gen2_phy_platform_data usbhs_phy_pdata __initconst = {
	.chan0_pci = 0, /* Channel 0 is USBHS */
	.chan2_pci = 1, /* Channel 2 is PCI USB host */
};

/* VIN */
static const struct resource vin_resources[] __initconst = {
	/* VIN0 */
	DEFINE_RES_MEM(0xe6ef0000, 0x1000),
	DEFINE_RES_IRQ(gic_spi(188)),
	/* VIN1 */
	DEFINE_RES_MEM(0xe6ef1000, 0x1000),
	DEFINE_RES_IRQ(gic_spi(189)),
};

static void __init koelsch_add_vin_device(unsigned idx,
					struct rcar_vin_platform_data *pdata)
{
	struct platform_device_info vin_info = {
		.parent		= &platform_bus,
		.name		= "r8a7791-vin",
		.id		= idx,
		.res		= &vin_resources[idx * 2],
		.num_res	= 2,
		.dma_mask	= DMA_BIT_MASK(32),
		.data		= pdata,
		.size_data	= sizeof(*pdata),
	};

	BUG_ON(idx > 1);

	platform_device_register_full(&vin_info);
}

#define KOELSCH_CAMERA(idx, name, addr, pdata, flag)			\
static struct i2c_board_info i2c_cam##idx##_device = {			\
	I2C_BOARD_INFO(name, addr),					\
};									\
									\
static struct rcar_vin_platform_data vin##idx##_pdata = {		\
	.flags = flag,							\
};									\
									\
static struct soc_camera_link cam##idx##_link = {			\
	.bus_id = idx,							\
	.board_info = &i2c_cam##idx##_device,				\
	.i2c_adapter_id = 2,						\
	.module_name = name,						\
	.priv = pdata,							\
}

KOELSCH_CAMERA(0, "adv7612", 0x4c, NULL, RCAR_VIN_BT709);
KOELSCH_CAMERA(1, "adv7180", 0x20, NULL, RCAR_VIN_BT656);

static void __init koelsch_add_camera0_device(void)
{
	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 0,
				      &cam0_link, sizeof(cam0_link));
	koelsch_add_vin_device(0, &vin0_pdata);
}

static void __init koelsch_add_camera1_device(void)
{
	platform_device_register_data(&platform_bus, "soc-camera-pdrv", 1,
				      &cam1_link, sizeof(cam1_link));
	koelsch_add_vin_device(1, &vin1_pdata);
}

/* VSP1 */
#if defined(CONFIG_VIDEO_RENESAS_VSP1)
static const struct vsp1_platform_data koelsch_vsps_pdata __initconst = {
	.features = 0,
	.rpf_count = 5,
	.uds_count = 3,
	.wpf_count = 4,
};

static const struct vsp1_platform_data koelsch_vspd0_pdata __initconst = {
	.features = VSP1_HAS_LIF,
	.rpf_count = 4,
	.uds_count = 1,
	.wpf_count = 4,
};

static const struct vsp1_platform_data koelsch_vspd1_pdata __initconst = {
	.features = VSP1_HAS_LIF,
	.rpf_count = 4,
	.uds_count = 1,
	.wpf_count = 4,
};

static const struct vsp1_platform_data * const koelsch_vsp1_pdata[] __initconst
									= {
	&koelsch_vsps_pdata,
	&koelsch_vspd0_pdata,
	&koelsch_vspd1_pdata,
};

static const struct resource vsp1_1_resources[] __initconst = {
	DEFINE_RES_MEM(0xfe928000, 0x8000),
	DEFINE_RES_IRQ(gic_spi(267)),
};

static const struct resource vsp1_2_resources[] __initconst = {
	DEFINE_RES_MEM(0xfe930000, 0x8000),
	DEFINE_RES_IRQ(gic_spi(246)),
};

static const struct resource vsp1_3_resources[] __initconst = {
	DEFINE_RES_MEM(0xfe938000, 0x8000),
	DEFINE_RES_IRQ(gic_spi(247)),
};

static const struct resource * const vsp1_resources[] __initconst = {
	vsp1_1_resources,
	vsp1_2_resources,
	vsp1_3_resources,
};

static void __init koelsch_add_vsp1_devices(void)
{
	struct platform_device_info info = {
		.name = "vsp1",
		.size_data = sizeof(*koelsch_vsp1_pdata[0]),
		.num_res = 2,
		.dma_mask = DMA_BIT_MASK(32),
	};
	unsigned int i;

	for (i = 1; i < ARRAY_SIZE(vsp1_resources); ++i) {
		info.id = i + 1;
		info.data = koelsch_vsp1_pdata[i];
		info.res = vsp1_resources[i];

		platform_device_register_full(&info);
	}
}
#endif

static const struct resource usbhs_phy_resources[] __initconst = {
	DEFINE_RES_MEM(0xe6590100, 0x100),
};

/* Add all available USB devices */
static void __init koelsch_add_usb_devices(void)
{
	platform_device_register_resndata(&platform_bus, "usb_phy_rcar_gen2",
					  -1, usbhs_phy_resources,
					  ARRAY_SIZE(usbhs_phy_resources),
					  &usbhs_phy_pdata,
					  sizeof(usbhs_phy_pdata));
	koelsch_add_usb0_gadget();
	koelsch_add_usb1_host();
}

/* MSIOF spidev */
static const struct spi_board_info spi_bus[] __initconst = {
	{
		.modalias	= "spidev",
		.max_speed_hz	= 6000000,
		.mode		= SPI_MODE_3,
		.bus_num	= 1,
		.chip_select	= 0,
	},
	{
		.modalias	= "spidev",
		.max_speed_hz	= 6000000,
		.mode		= SPI_MODE_3,
		.bus_num	= 2,
		.chip_select	= 0,
	},
};

/* POWER IC */
static struct i2c_board_info poweric_i2c[] = {
	{ I2C_BOARD_INFO("da9063", 0x58), },
};

static void koelsch_restart(char mode, const char *cmd)
{
	struct i2c_adapter *adap;
	struct i2c_client *client;
	u8 val;
	int busnum = 6;

	adap = i2c_get_adapter(busnum);
	if (!adap) {
		pr_err("failed to get adapter i2c%d\n", busnum);
		return;
	}

	client = i2c_new_device(adap, &poweric_i2c[0]);
	if (!client)
		pr_err("failed to register %s to i2c%d\n",
		       poweric_i2c[0].type, busnum);

	i2c_put_adapter(adap);

	val = i2c_smbus_read_byte_data(client, 0x13);

	if (val < 0)
		pr_err("couldn't access da9063\n");

	val |= 0x02;

	i2c_smbus_write_byte_data(client, 0x13, val);
}

#define koelsch_add_msiof_device spi_register_board_info

static struct of_dev_auxdata koelsch_auxdata_lookup[] __initdata = {
	OF_DEV_AUXDATA("renesas,sdhi-r8a7791", 0xee100000, "sdhi0",
			&sdhi0_info),
	OF_DEV_AUXDATA("renesas,sdhi-r8a7791", 0xee140000, "sdhi1",
			&sdhi1_info),
	OF_DEV_AUXDATA("renesas,sdhi-r8a7791", 0xee160000, "sdhi2",
			&sdhi2_info),
	{},
};

static void __init koelsch_add_standard_devices(void)
{
	shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
	shmobile_clk_workaround(clk_enables, ARRAY_SIZE(clk_enables), true);
	r8a7791_add_dt_devices();
	koelsch_add_dmac_prototype();
	of_platform_populate(NULL, of_default_bus_match_table,
			     koelsch_auxdata_lookup, NULL);

	koelsch_add_du_device();
	koelsch_add_usb_devices();
	koelsch_add_rsnd_device();
	koelsch_add_camera0_device();
	koelsch_add_camera1_device();
#if defined(CONFIG_VIDEO_RENESAS_VSP1)
	koelsch_add_vsp1_devices();
#endif
	koelsch_add_msiof_device(spi_bus, ARRAY_SIZE(spi_bus));
}

static const char * const koelsch_boards_compat_dt[] __initconst = {
	"renesas,koelsch",
	"renesas,koelsch-reference",
	NULL,
};

DT_MACHINE_START(KOELSCH_DT, "koelsch")
	.smp		= smp_ops(r8a7791_smp_ops),
	.init_early	= shmobile_init_delay,
	.init_time	= rcar_gen2_timer_init,
	.init_machine	= koelsch_add_standard_devices,
	.init_late	= shmobile_init_late,
	.reserve	= rcar_gen2_reserve,
	.restart	= koelsch_restart,
	.dt_compat	= koelsch_boards_compat_dt,
MACHINE_END