void PCB_EDIT_FRAME::Block_Move() { OnModify(); wxPoint MoveVector = GetScreen()->m_BlockLocate.GetMoveVector(); PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems(); itemsList->m_Status = UR_MOVED; for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ ) { BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii ); itemsList->SetPickedItemStatus( UR_MOVED, ii ); item->Move( MoveVector ); GetBoard()->GetConnectivity()->Update( item ); item->ClearFlags( IS_MOVED ); switch( item->Type() ) { case PCB_MODULE_T: m_Pcb->m_Status_Pcb = 0; item->ClearFlags(); break; // Move track segments case PCB_TRACE_T: // a track segment (segment on a copper layer) case PCB_VIA_T: // a via (like a track segment on a copper layer) m_Pcb->m_Status_Pcb = 0; break; case PCB_ZONE_AREA_T: case PCB_LINE_T: case PCB_TEXT_T: case PCB_TARGET_T: case PCB_DIMENSION_T: break; // This item is not put in undo list case PCB_ZONE_T: // SEG_ZONE items are now deprecated itemsList->RemovePicker( ii ); ii--; break; default: wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Move( ) error: unexpected type" ) ); break; } } SaveCopyInUndoList( *itemsList, UR_MOVED, MoveVector ); Compile_Ratsnest( NULL, true ); m_canvas->Refresh( true ); }
/* Copy marked items, at new position = old position + offset */ void CopyMarkedItems( MODULE* module, wxPoint offset ) { if( module == NULL ) return; for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() ) { if( !pad->IsSelected() ) continue; pad->ClearFlags( SELECTED ); D_PAD* NewPad = new D_PAD( *pad ); NewPad->SetParent( module ); NewPad->SetFlags( SELECTED ); module->Pads().PushFront( NewPad ); } BOARD_ITEM* newItem; for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() ) { if( !item->IsSelected() ) continue; item->ClearFlags( SELECTED ); newItem = (BOARD_ITEM*)item->Clone(); newItem->SetParent( module ); newItem->SetFlags( SELECTED ); module->GraphicalItems().PushFront( newItem ); } MoveMarkedItems( module, offset ); }
void PCB_EDIT_FRAME::Block_Flip() { #define INVERT( pos ) (pos) = center.y - ( (pos) - center.y ) wxPoint memo; wxPoint center; // Position of the axis for inversion of all elements OnModify(); PICKED_ITEMS_LIST* itemsList = &GetScreen()->m_BlockLocate.GetItems(); itemsList->m_Status = UR_FLIPPED; memo = GetCrossHairPosition(); center = GetScreen()->m_BlockLocate.Centre(); for( unsigned ii = 0; ii < itemsList->GetCount(); ii++ ) { BOARD_ITEM* item = (BOARD_ITEM*) itemsList->GetPickedItem( ii ); wxASSERT( item ); itemsList->SetPickedItemStatus( UR_FLIPPED, ii ); item->Flip( center ); switch( item->Type() ) { case PCB_MODULE_T: item->ClearFlags(); m_Pcb->m_Status_Pcb = 0; break; // Move and rotate the track segments case PCB_TRACE_T: // a track segment (segment on a copper layer) case PCB_VIA_T: // a via (like track segment on a copper layer) m_Pcb->m_Status_Pcb = 0; break; case PCB_ZONE_AREA_T: case PCB_LINE_T: case PCB_TEXT_T: case PCB_TARGET_T: case PCB_DIMENSION_T: break; // This item is not put in undo list case PCB_ZONE_T: // SEG_ZONE items are now deprecated itemsList->RemovePicker( ii ); ii--; break; default: wxMessageBox( wxT( "PCB_EDIT_FRAME::Block_Flip( ) error: unexpected type" ) ); break; } } SaveCopyInUndoList( *itemsList, UR_FLIPPED, center ); Compile_Ratsnest( NULL, true ); m_canvas->Refresh( true ); }
int EDIT_TOOL::Properties( const TOOL_EVENT& aEvent ) { const SELECTION& selection = m_selectionTool->GetSelection(); PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>(); // Shall the selection be cleared at the end? bool unselect = selection.Empty(); if( !hoverSelection( false ) ) return 0; // Tracks & vias are treated in a special way: if( ( SELECTION_CONDITIONS::OnlyTypes( GENERAL_COLLECTOR::Tracks ) )( selection ) ) { DIALOG_TRACK_VIA_PROPERTIES dlg( editFrame, selection ); if( dlg.ShowModal() ) { dlg.Apply( *m_commit ); m_commit->Push( _( "Edit track/via properties" ) ); } } else if( selection.Size() == 1 ) // Properties are displayed when there is only one item selected { // Display properties dialog BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 ); // Some of properties dialogs alter pointers, so we should deselect them m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); // Store flags, so they can be restored later STATUS_FLAGS flags = item->GetFlags(); item->ClearFlags(); // Do not handle undo buffer, it is done by the properties dialogs @todo LEGACY // Display properties dialog provided by the legacy canvas frame editFrame->OnEditItemRequest( NULL, item ); m_toolMgr->RunAction( COMMON_ACTIONS::editModifiedSelection, true ); item->SetFlags( flags ); } if( unselect ) m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); return 0; }
int EDIT_TOOL::Properties( const TOOL_EVENT& aEvent ) { const SELECTION& selection = m_selectionTool->GetSelection(); PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>(); if( !hoverSelection( selection, false ) ) return 0; // Properties are displayed when there is only one item selected if( selection.Size() == 1 ) { // Display properties dialog BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 ); std::vector<PICKED_ITEMS_LIST*>& undoList = editFrame->GetScreen()->m_UndoList.m_CommandsList; // Some of properties dialogs alter pointers, so we should deselect them m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); STATUS_FLAGS flags = item->GetFlags(); item->ClearFlags(); // It is necessary to determine if anything has changed PICKED_ITEMS_LIST* lastChange = undoList.empty() ? NULL : undoList.back(); // Display properties dialog editFrame->OnEditItemRequest( NULL, item ); PICKED_ITEMS_LIST* currentChange = undoList.empty() ? NULL : undoList.back(); if( lastChange != currentChange ) // Something has changed { processChanges( currentChange ); updateRatsnest( true ); getModel<BOARD>()->GetRatsnest()->Recalculate(); item->ViewUpdate(); m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true ); } item->SetFlags( flags ); } return 0; }
/* Copy marked items, at new position = old position + offset */ void CopyMarkedItems( MODULE* module, wxPoint offset, bool aIncrement ) { if( module == NULL ) return; // Reference and value cannot be copied, they are unique. // Ensure they are not selected module->Reference().ClearFlags(); module->Value().ClearFlags(); for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() ) { if( !pad->IsSelected() ) continue; pad->ClearFlags( SELECTED ); D_PAD* NewPad = new D_PAD( *pad ); NewPad->SetParent( module ); NewPad->SetFlags( SELECTED ); module->Pads().PushFront( NewPad ); if( aIncrement ) NewPad->IncrementPadName( true, true ); } BOARD_ITEM* newItem; for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() ) { if( !item->IsSelected() ) continue; item->ClearFlags( SELECTED ); newItem = (BOARD_ITEM*)item->Clone(); newItem->SetParent( module ); newItem->SetFlags( SELECTED ); module->GraphicalItems().PushFront( newItem ); } MoveMarkedItems( module, offset ); }
int EDIT_TOOL::Properties( const TOOL_EVENT& aEvent ) { const SELECTION& selection = m_selectionTool->GetSelection(); PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>(); // Shall the selection be cleared at the end? bool unselect = selection.Empty(); if( !hoverSelection( selection, false ) ) return 0; // Tracks & vias are treated in a special way: if( ( SELECTION_CONDITIONS::OnlyTypes( m_tracksViasType ) )( selection ) ) { DIALOG_TRACK_VIA_PROPERTIES dlg( editFrame, selection ); if( dlg.ShowModal() ) { RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest(); editFrame->OnModify(); editFrame->SaveCopyInUndoList( selection.items, UR_CHANGED ); dlg.Apply(); selection.ForAll<KIGFX::VIEW_ITEM>( boost::bind( &KIGFX::VIEW_ITEM::ViewUpdate, _1, KIGFX::VIEW_ITEM::ALL ) ); selection.ForAll<BOARD_ITEM>( boost::bind( &RN_DATA::Update, ratsnest, _1 ) ); ratsnest->Recalculate(); } } else if( selection.Size() == 1 ) // Properties are displayed when there is only one item selected { // Display properties dialog BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 ); // Store the head of the undo list to compare if anything has changed std::vector<PICKED_ITEMS_LIST*>& undoList = editFrame->GetScreen()->m_UndoList.m_CommandsList; // Some of properties dialogs alter pointers, so we should deselect them m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); STATUS_FLAGS flags = item->GetFlags(); item->ClearFlags(); // It is necessary to determine if anything has changed, so store the current undo save point PICKED_ITEMS_LIST* undoSavePoint = undoList.empty() ? NULL : undoList.back(); // Display properties dialog provided by the legacy canvas frame editFrame->OnEditItemRequest( NULL, item ); if( !undoList.empty() && undoList.back() != undoSavePoint ) // Undo buffer has changed { // Process changes stored after undoSavePoint processUndoBuffer( undoSavePoint ); // Update the modified item item->ViewUpdate(); RN_DATA* ratsnest = getModel<BOARD>()->GetRatsnest(); ratsnest->Recalculate(); // TODO OBSERVER! I miss you so much.. m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true ); } item->SetFlags( flags ); } if( unselect ) m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); return 0; }
int EDIT_TOOL::Properties( TOOL_EVENT& aEvent ) { const SELECTION& selection = m_selectionTool->GetSelection(); PCB_BASE_EDIT_FRAME* editFrame = getEditFrame<PCB_BASE_EDIT_FRAME>(); if( !makeSelection( selection ) ) { setTransitions(); return 0; } // Properties are displayed when there is only one item selected if( selection.Size() == 1 ) { // Display properties dialog BOARD_ITEM* item = selection.Item<BOARD_ITEM>( 0 ); // Check if user wants to edit pad or module properties if( item->Type() == PCB_MODULE_T ) { VECTOR2D cursor = getViewControls()->GetCursorPosition(); for( D_PAD* pad = static_cast<MODULE*>( item )->Pads(); pad; pad = pad->Next() ) { if( pad->ViewBBox().Contains( cursor ) ) { // Turns out that user wants to edit a pad properties item = pad; break; } } } std::vector<PICKED_ITEMS_LIST*>& undoList = editFrame->GetScreen()->m_UndoList.m_CommandsList; // Some of properties dialogs alter pointers, so we should deselect them m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); STATUS_FLAGS flags = item->GetFlags(); item->ClearFlags(); // It is necessary to determine if anything has changed PICKED_ITEMS_LIST* lastChange = undoList.empty() ? NULL : undoList.back(); // Display properties dialog editFrame->OnEditItemRequest( NULL, item ); PICKED_ITEMS_LIST* currentChange = undoList.empty() ? NULL : undoList.back(); if( lastChange != currentChange ) // Something has changed { processChanges( currentChange ); updateRatsnest( true ); getModel<BOARD>()->GetRatsnest()->Recalculate(); item->ViewUpdate(); m_toolMgr->RunAction( COMMON_ACTIONS::pointEditorUpdate, true ); } item->SetFlags( flags ); } setTransitions(); return 0; }
void PCB_BASE_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand, bool aRebuildRatsnet ) { BOARD_ITEM* item; bool not_found = false; bool reBuild_ratsnest = false; bool deep_reBuild_ratsnest = false; // true later if pointers must be rebuilt auto view = GetGalCanvas()->GetView(); auto connectivity = GetBoard()->GetConnectivity(); // Undo in the reverse order of list creation: (this can allow stacked changes // like the same item can be changes and deleted in the same complex command bool build_item_list = true; // if true the list of existing items must be rebuilt // Restore changes in reverse order for( int ii = aList->GetCount() - 1; ii >= 0 ; ii-- ) { item = (BOARD_ITEM*) aList->GetPickedItem( ii ); wxASSERT( item ); /* Test for existence of item on board. * It could be deleted, and no more on board: * - if a call to SaveCopyInUndoList was forgotten in Pcbnew * - in zones outlines, when a change in one zone merges this zone with an other * This test avoids a Pcbnew crash * Obviously, this test is not made for deleted items */ UNDO_REDO_T status = aList->GetPickedItemStatus( ii ); if( status != UR_DELETED && status != UR_DRILLORIGIN // origin markers never on board && status != UR_GRIDORIGIN ) // origin markers never on board { if( build_item_list ) // Build list of existing items, for integrity test TestForExistingItem( GetBoard(), NULL ); build_item_list = false; if( !TestForExistingItem( GetBoard(), item ) ) { // Checking if it ever happens wxASSERT_MSG( false, "Item in the undo buffer does not exist" ); // Remove this non existent item aList->RemovePicker( ii ); ii++; // the current item was removed, ii points now the next item // decrement it because it will be incremented later not_found = true; continue; } } item->ClearFlags(); // see if we must rebuild ratsnets and pointers lists switch( item->Type() ) { case PCB_MODULE_T: deep_reBuild_ratsnest = true; // Pointers on pads can be invalid // Fall through case PCB_ZONE_AREA_T: case PCB_TRACE_T: case PCB_VIA_T: reBuild_ratsnest = true; break; case PCB_NETINFO_T: reBuild_ratsnest = true; deep_reBuild_ratsnest = true; break; default: break; } // It is possible that we are going to replace the selected item, so clear it SetCurItem( NULL ); switch( aList->GetPickedItemStatus( ii ) ) { case UR_CHANGED: /* Exchange old and new data for each item */ { BOARD_ITEM* image = (BOARD_ITEM*) aList->GetPickedItemLink( ii ); // Remove all pads/drawings/texts, as they become invalid // for the VIEW after SwapData() called for modules view->Remove( item ); connectivity->Remove( item ); SwapItemData( item, image ); // Update all pads/drawings/texts, as they become invalid // for the VIEW after SwapData() called for modules if( item->Type() == PCB_MODULE_T ) { MODULE* newModule = static_cast<MODULE*>( item ); newModule->RunOnChildren( std::bind( &BOARD_ITEM::ClearFlags, _1, EDA_ITEM_ALL_FLAGS )); } view->Add( item ); connectivity->Add( item ); item->ClearFlags(); } break; case UR_NEW: /* new items are deleted */ aList->SetPickedItemStatus( UR_DELETED, ii ); GetModel()->Remove( item ); view->Remove( item ); break; case UR_DELETED: /* deleted items are put in List, as new items */ aList->SetPickedItemStatus( UR_NEW, ii ); GetModel()->Add( item ); view->Add( item ); build_item_list = true; break; case UR_MOVED: item->Move( aRedoCommand ? aList->m_TransformPoint : -aList->m_TransformPoint ); view->Update( item, KIGFX::GEOMETRY ); connectivity->Update( item ); break; case UR_ROTATED: item->Rotate( aList->m_TransformPoint, aRedoCommand ? m_rotationAngle : -m_rotationAngle ); view->Update( item, KIGFX::GEOMETRY ); connectivity->Update( item ); break; case UR_ROTATED_CLOCKWISE: item->Rotate( aList->m_TransformPoint, aRedoCommand ? -m_rotationAngle : m_rotationAngle ); view->Update( item, KIGFX::GEOMETRY ); connectivity->Update( item ); break; case UR_FLIPPED: item->Flip( aList->m_TransformPoint ); view->Update( item, KIGFX::LAYERS ); connectivity->Update( item ); break; case UR_DRILLORIGIN: case UR_GRIDORIGIN: { BOARD_ITEM* image = (BOARD_ITEM*) aList->GetPickedItemLink( ii ); VECTOR2D origin = image->GetPosition(); image->SetPosition( item->GetPosition() ); if( aList->GetPickedItemStatus( ii ) == UR_DRILLORIGIN ) PCB_EDITOR_CONTROL::DoSetDrillOrigin( view, this, item, origin ); else PCBNEW_CONTROL::DoSetGridOrigin( view, this, item, origin ); } break; default: { wxLogDebug( wxT( "PutDataInPreviousState() error (unknown code %X)" ), aList->GetPickedItemStatus( ii ) ); } break; } } if( not_found ) wxMessageBox( _( "Incomplete undo/redo operation: some items not found" ) ); // Rebuild pointers and connectivity that can be changed. // connectivity can be rebuilt only in the board editor frame if( IsType( FRAME_PCB ) && ( reBuild_ratsnest || deep_reBuild_ratsnest ) ) { Compile_Ratsnest( NULL, false ); } GetBoard()->SanitizeNetcodes(); }
void FOOTPRINT_EDIT_FRAME::OnLeftClick( wxDC* DC, const wxPoint& MousePos ) { BOARD_ITEM* item = GetCurItem(); m_canvas->CrossHairOff( DC ); if( GetToolId() == ID_NO_TOOL_SELECTED ) { if( item && item->GetFlags() ) // Move item command in progress { switch( item->Type() ) { case PCB_MODULE_TEXT_T: PlaceTexteModule( static_cast<TEXTE_MODULE*>( item ), DC ); break; case PCB_MODULE_EDGE_T: SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT ); Place_EdgeMod( static_cast<EDGE_MODULE*>( item ) ); break; case PCB_PAD_T: PlacePad( static_cast<D_PAD*>( item ), DC ); break; default: { wxString msg; msg.Printf( wxT( "WinEDA_ModEditFrame::OnLeftClick err:Struct %d, m_Flag %X" ), item->Type(), item->GetFlags() ); DisplayError( this, msg ); item->ClearFlags(); break; } } } else { if( !wxGetKeyState( WXK_SHIFT ) && !wxGetKeyState( WXK_ALT ) && !wxGetKeyState( WXK_CONTROL ) ) item = ModeditLocateAndDisplay(); SetCurItem( item ); } } item = GetCurItem(); bool no_item_edited = item == NULL || item->GetFlags() == 0; switch( GetToolId() ) { case ID_NO_TOOL_SELECTED: break; case ID_MODEDIT_CIRCLE_TOOL: case ID_MODEDIT_ARC_TOOL: case ID_MODEDIT_LINE_TOOL: if( no_item_edited ) { STROKE_T shape = S_SEGMENT; if( GetToolId() == ID_MODEDIT_CIRCLE_TOOL ) shape = S_CIRCLE; if( GetToolId() == ID_MODEDIT_ARC_TOOL ) shape = S_ARC; SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) NULL, DC, shape ) ); } else if( item->IsNew() ) { if( ( (EDGE_MODULE*) item )->GetShape() == S_CIRCLE ) { End_Edge_Module( (EDGE_MODULE*) item ); SetCurItem( NULL ); m_canvas->Refresh(); } else if( ( (EDGE_MODULE*) item )->GetShape() == S_ARC ) { End_Edge_Module( (EDGE_MODULE*) item ); SetCurItem( NULL ); m_canvas->Refresh(); } else if( ( (EDGE_MODULE*) item )->GetShape() == S_SEGMENT ) { SetCurItem( Begin_Edge_Module( (EDGE_MODULE*) item, DC, S_SEGMENT ) ); } else { wxMessageBox( wxT( "ProcessCommand error: unknown shape" ) ); } } break; case ID_MODEDIT_DELETE_TOOL: if( ! no_item_edited ) // Item in edit, cannot delete it break; item = ModeditLocateAndDisplay(); if( item && item->Type() != PCB_MODULE_T ) // Cannot delete the module itself { SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT ); RemoveStruct( item ); SetCurItem( NULL ); } break; case ID_MODEDIT_ANCHOR_TOOL: { MODULE* module = GetBoard()->m_Modules; if( module == NULL // No module loaded || (module->GetFlags() != 0) ) break; SaveCopyInUndoList( module, UR_MODEDIT ); // set the new relative internal local coordinates of footprint items wxPoint moveVector = module->GetPosition() - GetCrossHairPosition(); module->MoveAnchorPosition( moveVector ); // Usually, we do not need to change twice the anchor position, // so deselect the active tool SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString ); SetCurItem( NULL ); m_canvas->Refresh(); } break; case ID_MODEDIT_PLACE_GRID_COORD: m_canvas->DrawGridAxis( DC, GR_XOR, GetBoard()->GetGridOrigin() ); SetGridOrigin( GetCrossHairPosition() ); m_canvas->DrawGridAxis( DC, GR_COPY, GetBoard()->GetGridOrigin() ); GetScreen()->SetModify(); break; case ID_MODEDIT_TEXT_TOOL: if( GetBoard()->m_Modules == NULL ) break; SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT ); CreateTextModule( GetBoard()->m_Modules, DC ); break; case ID_MODEDIT_PAD_TOOL: if( GetBoard()->m_Modules ) { SaveCopyInUndoList( GetBoard()->m_Modules, UR_MODEDIT ); AddPad( GetBoard()->m_Modules, true ); } break; default: DisplayError( this, wxT( "FOOTPRINT_EDIT_FRAME::ProcessCommand error" ) ); SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString ); } m_canvas->CrossHairOn( DC ); }
void PCB_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand, bool aRebuildRatsnet ) { BOARD_ITEM* item; bool not_found = false; bool reBuild_ratsnest = false; KIGFX::VIEW* view = GetGalCanvas()->GetView(); RN_DATA* ratsnest = GetBoard()->GetRatsnest(); // Undo in the reverse order of list creation: (this can allow stacked changes // like the same item can be changes and deleted in the same complex command bool build_item_list = true; // if true the list of existing items must be rebuilt for( int ii = aList->GetCount() - 1; ii >= 0 ; ii-- ) { item = (BOARD_ITEM*) aList->GetPickedItem( ii ); wxASSERT( item ); /* Test for existence of item on board. * It could be deleted, and no more on board: * - if a call to SaveCopyInUndoList was forgotten in Pcbnew * - in zones outlines, when a change in one zone merges this zone with an other * This test avoids a Pcbnew crash * Obviously, this test is not made for deleted items */ UNDO_REDO_T status = aList->GetPickedItemStatus( ii ); if( status != UR_DELETED ) { if( build_item_list ) // Build list of existing items, for integrity test TestForExistingItem( GetBoard(), NULL ); build_item_list = false; if( !TestForExistingItem( GetBoard(), item ) ) { // Remove this non existent item aList->RemovePicker( ii ); ii++; // the current item was removed, ii points now the next item // decrement it because it will be incremented later not_found = true; continue; } } item->ClearFlags(); // see if we must rebuild ratsnets and pointers lists switch( item->Type() ) { case PCB_MODULE_T: case PCB_ZONE_AREA_T: case PCB_TRACE_T: case PCB_VIA_T: reBuild_ratsnest = true; break; default: break; } switch( aList->GetPickedItemStatus( ii ) ) { case UR_CHANGED: /* Exchange old and new data for each item */ { BOARD_ITEM* image = (BOARD_ITEM*) aList->GetPickedItemLink( ii ); // Remove all pads/drawings/texts, as they become invalid // for the VIEW after SwapData() called for modules if( item->Type() == PCB_MODULE_T ) { MODULE* oldModule = static_cast<MODULE*>( item ); oldModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) ); } ratsnest->Remove( item ); item->SwapData( image ); // Update all pads/drawings/texts, as they become invalid // for the VIEW after SwapData() called for modules if( item->Type() == PCB_MODULE_T ) { MODULE* newModule = static_cast<MODULE*>( item ); newModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) ); } ratsnest->Add( item ); item->ClearFlags( SELECTED ); item->ViewUpdate( KIGFX::VIEW_ITEM::LAYERS ); } break; case UR_NEW: /* new items are deleted */ aList->SetPickedItemStatus( UR_DELETED, ii ); GetBoard()->Remove( item ); if( item->Type() == PCB_MODULE_T ) { MODULE* module = static_cast<MODULE*>( item ); module->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) ); } view->Remove( item ); item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); break; case UR_DELETED: /* deleted items are put in List, as new items */ aList->SetPickedItemStatus( UR_NEW, ii ); GetBoard()->Add( item ); if( item->Type() == PCB_MODULE_T ) { MODULE* module = static_cast<MODULE*>( item ); module->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1) ); } view->Add( item ); item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); build_item_list = true; break; case UR_MOVED: item->Move( aRedoCommand ? aList->m_TransformPoint : -aList->m_TransformPoint ); item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); ratsnest->Update( item ); break; case UR_ROTATED: item->Rotate( aList->m_TransformPoint, aRedoCommand ? m_rotationAngle : -m_rotationAngle ); item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); ratsnest->Update( item ); break; case UR_ROTATED_CLOCKWISE: item->Rotate( aList->m_TransformPoint, aRedoCommand ? -m_rotationAngle : m_rotationAngle ); item->ViewUpdate( KIGFX::VIEW_ITEM::GEOMETRY ); ratsnest->Update( item ); break; case UR_FLIPPED: item->Flip( aList->m_TransformPoint ); item->ViewUpdate( KIGFX::VIEW_ITEM::LAYERS ); ratsnest->Update( item ); break; default: { wxString msg; msg.Printf( wxT( "PutDataInPreviousState() error (unknown code %X)" ), aList->GetPickedItemStatus( ii ) ); wxMessageBox( msg ); } break; } } if( not_found ) wxMessageBox( wxT( "Incomplete undo/redo operation: some items not found" ) ); // Rebuild pointers and ratsnest that can be changed. if( reBuild_ratsnest && aRebuildRatsnet ) { if( IsGalCanvasActive() ) ratsnest->Recalculate(); else Compile_Ratsnest( NULL, true ); } }
void BOARD_COMMIT::Revert() { PICKED_ITEMS_LIST undoList; KIGFX::VIEW* view = m_toolMgr->GetView(); BOARD* board = (BOARD*) m_toolMgr->GetModel(); auto connectivity = board->GetConnectivity(); for( auto it = m_changes.rbegin(); it != m_changes.rend(); ++it ) { COMMIT_LINE& ent = *it; BOARD_ITEM* item = static_cast<BOARD_ITEM*>( ent.m_item ); BOARD_ITEM* copy = static_cast<BOARD_ITEM*>( ent.m_copy ); int changeType = ent.m_type & CHT_TYPE; int changeFlags = ent.m_type & CHT_FLAGS; switch( changeType ) { case CHT_ADD: if( !( changeFlags & CHT_DONE ) ) break; view->Remove( item ); connectivity->Remove( item ); board->Remove( item ); break; case CHT_REMOVE: if( !( changeFlags & CHT_DONE ) ) break; if( item->Type() == PCB_MODULE_T ) { MODULE* newModule = static_cast<MODULE*>( item ); newModule->RunOnChildren( std::bind( &EDA_ITEM::ClearFlags, _1, SELECTED ) ); } view->Add( item ); connectivity->Add( item ); board->Add( item ); break; case CHT_MODIFY: { view->Remove( item ); connectivity->Remove( item ); item->SwapData( copy ); item->ClearFlags( SELECTED ); // Update all pads/drawings/texts, as they become invalid // for the VIEW after SwapData() called for modules if( item->Type() == PCB_MODULE_T ) { MODULE* newModule = static_cast<MODULE*>( item ); newModule->RunOnChildren( std::bind( &EDA_ITEM::ClearFlags, _1, SELECTED ) ); } view->Add( item ); connectivity->Add( item ); delete copy; break; } default: wxASSERT( false ); break; } } if ( !m_editModules ) connectivity->RecalculateRatsnest(); clear(); }
void BOARD_COMMIT::Revert() { PICKED_ITEMS_LIST undoList; KIGFX::VIEW* view = m_toolMgr->GetView(); BOARD* board = (BOARD*) m_toolMgr->GetModel(); RN_DATA* ratsnest = board->GetRatsnest(); for( auto it = m_changes.rbegin(); it != m_changes.rend(); ++it ) { COMMIT_LINE& ent = *it; BOARD_ITEM* item = static_cast<BOARD_ITEM*>( ent.m_item ); BOARD_ITEM* copy = static_cast<BOARD_ITEM*>( ent.m_copy ); switch( ent.m_type ) { case CHT_ADD: if( item->Type() == PCB_MODULE_T ) { MODULE* oldModule = static_cast<MODULE*>( item ); oldModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) ); } view->Remove( item ); ratsnest->Remove( item ); break; case CHT_REMOVE: if( item->Type() == PCB_MODULE_T ) { MODULE* newModule = static_cast<MODULE*>( item ); newModule->RunOnChildren( boost::bind( &EDA_ITEM::ClearFlags, _1, SELECTED ) ); newModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) ); } view->Add( item ); ratsnest->Add( item ); break; case CHT_MODIFY: { if( item->Type() == PCB_MODULE_T ) { MODULE* oldModule = static_cast<MODULE*>( item ); oldModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Remove, view, _1 ) ); } view->Remove( item ); ratsnest->Remove( item ); item->SwapData( copy ); item->ClearFlags( SELECTED ); // Update all pads/drawings/texts, as they become invalid // for the VIEW after SwapData() called for modules if( item->Type() == PCB_MODULE_T ) { MODULE* newModule = static_cast<MODULE*>( item ); newModule->RunOnChildren( boost::bind( &EDA_ITEM::ClearFlags, _1, SELECTED ) ); newModule->RunOnChildren( boost::bind( &KIGFX::VIEW::Add, view, _1 ) ); } view->Add( item ); ratsnest->Add( item ); delete copy; break; } default: assert( false ); break; } } ratsnest->Recalculate(); clear(); }
/** * Function PutDataInPreviousState * Used in undo or redo command. * Put data pointed by List in the previous state, i.e. the state memorised by List * @param aList = a PICKED_ITEMS_LIST pointer to the list of items to undo/redo * @param aRedoCommand = a bool: true for redo, false for undo * @param aRebuildRatsnet = a bool: true to rebuid ratsnet (normal use, and default), false * to just retrieve las state (used in abort commands that do not need to rebuild ratsnest) */ void PCB_EDIT_FRAME::PutDataInPreviousState( PICKED_ITEMS_LIST* aList, bool aRedoCommand, bool aRebuildRatsnet ) { BOARD_ITEM* item; bool not_found = false; bool reBuild_ratsnest = false; // Undo in the reverse order of list creation: (this can allow stacked changes // like the same item can be changes and deleted in the same complex command bool build_item_list = true; // if true the list of esiting items must be rebuilt for( int ii = aList->GetCount()-1; ii >= 0 ; ii-- ) { item = (BOARD_ITEM*) aList->GetPickedItem( ii ); wxASSERT( item ); /* Test for existence of item on board. * It could be deleted, and no more on board: * - if a call to SaveCopyInUndoList was forgotten in Pcbnew * - in zones outlines, when a change in one zone merges this zone with an other * This test avoids a Pcbnew crash * Obviouly, this test is not made for deleted items */ UNDO_REDO_T status = aList->GetPickedItemStatus( ii ); if( status != UR_DELETED ) { if( build_item_list ) // Build list of existing items, for integrity test TestForExistingItem( GetBoard(), NULL ); build_item_list = false; if( !TestForExistingItem( GetBoard(), item ) ) { // Remove this non existant item aList->RemovePicker( ii ); ii++; // the current item was removed, ii points now the next item // decrement it because it will be incremented later not_found = true; continue; } } item->ClearFlags(); // see if we must rebuild ratsnets and pointers lists switch( item->Type() ) { case PCB_MODULE_T: case PCB_ZONE_AREA_T: case PCB_TRACE_T: case PCB_VIA_T: reBuild_ratsnest = true; break; default: break; } switch( aList->GetPickedItemStatus( ii ) ) { case UR_CHANGED: /* Exchange old and new data for each item */ { BOARD_ITEM* image = (BOARD_ITEM*) aList->GetPickedItemLink( ii ); SwapData( item, image ); } break; case UR_NEW: /* new items are deleted */ aList->SetPickedItemStatus( UR_DELETED, ii ); GetBoard()->Remove( item ); break; case UR_DELETED: /* deleted items are put in List, as new items */ aList->SetPickedItemStatus( UR_NEW, ii ); GetBoard()->Add( item ); build_item_list = true; break; case UR_MOVED: item->Move( aRedoCommand ? aList->m_TransformPoint : -aList->m_TransformPoint ); break; case UR_ROTATED: item->Rotate( aList->m_TransformPoint, aRedoCommand ? 900 : -900 ); break; case UR_ROTATED_CLOCKWISE: item->Rotate( aList->m_TransformPoint, aRedoCommand ? -900 : 900 ); break; case UR_FLIPPED: item->Flip( aList->m_TransformPoint ); break; default: { wxString msg; msg.Printf( wxT( "PutDataInPreviousState() error (unknown code %X)" ), aList->GetPickedItemStatus( ii ) ); wxMessageBox( msg ); } break; } } if( not_found ) wxMessageBox( wxT( "Incomplete undo/redo operation: some items not found" ) ); // Rebuild pointers and rastnest that can be changed. if( reBuild_ratsnest && aRebuildRatsnet ) Compile_Ratsnest( NULL, true ); }
int DRAWING_TOOL::PlaceText( const TOOL_EVENT& aEvent ) { BOARD_ITEM* text = NULL; const BOARD_DESIGN_SETTINGS& dsnSettings = m_frame->GetDesignSettings(); BOARD_COMMIT commit( m_frame ); // Add a VIEW_GROUP that serves as a preview for the new item SELECTION preview( m_view ); m_view->Add( &preview ); m_toolMgr->RunAction( COMMON_ACTIONS::selectionClear, true ); m_controls->ShowCursor( true ); m_controls->SetSnapping( true ); // do not capture or auto-pan until we start placing some text SCOPED_DRAW_MODE scopedDrawMode( m_mode, MODE::TEXT ); Activate(); m_frame->SetToolID( m_editModules ? ID_MODEDIT_TEXT_TOOL : ID_PCB_ADD_TEXT_BUTT, wxCURSOR_PENCIL, _( "Add text" ) ); // Main loop: keep receiving events while( OPT_TOOL_EVENT evt = Wait() ) { VECTOR2I cursorPos = m_controls->GetCursorPosition(); if( evt->IsCancel() || evt->IsActivate() ) { if( text ) { // Delete the old text and have another try delete text; text = NULL; preview.Clear(); m_controls->SetAutoPan( false ); m_controls->CaptureCursor( false ); m_controls->ShowCursor( true ); } else break; if( evt->IsActivate() ) // now finish unconditionally break; } else if( text && evt->Category() == TC_COMMAND ) { if( evt->IsAction( &COMMON_ACTIONS::rotate ) ) { text->Rotate( text->GetPosition(), m_frame->GetRotationAngle() ); m_view->Update( &preview ); } // TODO rotate CCW else if( evt->IsAction( &COMMON_ACTIONS::flip ) ) { text->Flip( text->GetPosition() ); m_view->Update( &preview ); } } else if ( evt->IsClick( BUT_RIGHT ) ) { showContextMenu(); } else if( evt->IsClick( BUT_LEFT ) ) { if( !text ) { // Init the new item attributes if( m_editModules ) { TEXTE_MODULE* textMod = new TEXTE_MODULE( (MODULE*) m_frame->GetModel() ); textMod->SetLayer( m_frame->GetActiveLayer() ); textMod->SetSize( dsnSettings.m_ModuleTextSize ); textMod->SetThickness( dsnSettings.m_ModuleTextWidth ); textMod->SetTextPosition( wxPoint( cursorPos.x, cursorPos.y ) ); DialogEditModuleText textDialog( m_frame, textMod, NULL ); bool placing; RunMainStack( [&]() { placing = textDialog.ShowModal() && ( textMod->GetText().Length() > 0 ); } ); if( placing ) text = textMod; else delete textMod; } else { TEXTE_PCB* textPcb = new TEXTE_PCB( m_frame->GetModel() ); // TODO we have to set IS_NEW, otherwise InstallTextPCB.. creates an undo entry :| LEGACY_CLEANUP textPcb->SetFlags( IS_NEW ); LAYER_ID layer = m_frame->GetActiveLayer(); textPcb->SetLayer( layer ); // Set the mirrored option for layers on the BACK side of the board if( IsBackLayer( layer ) ) textPcb->SetMirrored( true ); textPcb->SetSize( dsnSettings.m_PcbTextSize ); textPcb->SetThickness( dsnSettings.m_PcbTextWidth ); textPcb->SetTextPosition( wxPoint( cursorPos.x, cursorPos.y ) ); RunMainStack( [&]() { getEditFrame<PCB_EDIT_FRAME>()->InstallTextPCBOptionsFrame( textPcb, NULL ); } ); if( textPcb->GetText().IsEmpty() ) delete textPcb; else text = textPcb; } if( text == NULL ) continue; m_controls->CaptureCursor( true ); m_controls->SetAutoPan( true ); //m_controls->ShowCursor( false ); preview.Add( text ); } else { //assert( text->GetText().Length() > 0 ); //assert( text->GetSize().x > 0 && text->GetSize().y > 0 ); text->ClearFlags(); preview.Remove( text ); commit.Add( text ); commit.Push( _( "Place a text" ) ); m_controls->CaptureCursor( false ); m_controls->SetAutoPan( false ); m_controls->ShowCursor( true ); text = NULL; } } else if( text && evt->IsMotion() ) { text->SetPosition( wxPoint( cursorPos.x, cursorPos.y ) ); // Show a preview of the item m_view->Update( &preview ); } } m_controls->ShowCursor( false ); m_controls->SetSnapping( false ); m_controls->SetAutoPan( false ); m_controls->CaptureCursor( false ); m_view->Remove( &preview ); m_frame->SetToolID( ID_NO_TOOL_SELECTED, wxCURSOR_DEFAULT, wxEmptyString ); return 0; }