/* Draw in drag mode when moving a pad.
*/
static void Show_Pad_Move( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
bool aErase )
{
TRACK* Track;
BASE_SCREEN* screen = aPanel->GetScreen();
D_PAD* pad = s_CurrentSelectedPad;
if( pad == NULL ) // Should not occur
return;
if( aErase )
pad->Draw( aPanel, aDC, GR_XOR );
pad->SetPosition( screen->GetCrossHairPosition() );
pad->Draw( aPanel, aDC, GR_XOR );
for( unsigned ii = 0; ii < g_DragSegmentList.size(); ii++ )
{
Track = g_DragSegmentList[ii].m_Track;
if( aErase )
Track->Draw( aPanel, aDC, GR_XOR );
g_DragSegmentList[ii].SetTrackEndsCoordinates( wxPoint(0, 0) );
Track->Draw( aPanel, aDC, GR_XOR );
}
}
/* Cancel move pad command.
*/
static void Abort_Move_Pad( EDA_DRAW_PANEL* Panel, wxDC* DC )
{
D_PAD* pad = s_CurrentSelectedPad;
Panel->SetMouseCapture( NULL, NULL );
if( pad == NULL )
return;
pad->Draw( Panel, DC, GR_XOR );
pad->ClearFlags();
pad->SetPosition( Pad_OldPos );
pad->Draw( Panel, DC, GR_XOR );
// Pad move in progress: restore origin of dragged tracks, if any.
for( unsigned ii = 0; ii < g_DragSegmentList.size(); ii++ )
{
TRACK* Track = g_DragSegmentList[ii].m_Track;
Track->Draw( Panel, DC, GR_XOR );
Track->SetState( IN_EDIT, OFF );
g_DragSegmentList[ii].RestoreInitialValues();
Track->Draw( Panel, DC, GR_OR );
}
EraseDragList();
s_CurrentSelectedPad = NULL;
}
void MODULE::Draw( EDA_DRAW_PANEL* aPanel, wxDC* aDC, GR_DRAWMODE aDrawMode,
const wxPoint& aOffset )
{
if( (m_Flags & DO_NOT_DRAW) || (IsMoving()) )
return;
for( D_PAD* pad = m_Pads; pad; pad = pad->Next() )
{
if( pad->IsMoving() )
continue;
pad->Draw( aPanel, aDC, aDrawMode, aOffset );
}
BOARD* brd = GetBoard();
// Draws footprint anchor
DrawAncre( aPanel, aDC, aOffset, DIM_ANCRE_MODULE, aDrawMode );
// Draw graphic items
if( brd->IsElementVisible( MOD_REFERENCES_VISIBLE ) )
{
if( !(m_Reference->IsMoving()) )
m_Reference->Draw( aPanel, aDC, aDrawMode, aOffset );
}
if( brd->IsElementVisible( MOD_VALUES_VISIBLE ) )
{
if( !(m_Value->IsMoving()) )
m_Value->Draw( aPanel, aDC, aDrawMode, aOffset );
}
for( BOARD_ITEM* item = m_Drawings; item; item = item->Next() )
{
if( item->IsMoving() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
case PCB_MODULE_EDGE_T:
item->Draw( aPanel, aDC, aDrawMode, aOffset );
break;
default:
break;
}
}
// Enable these line to draw m_BoundaryBox (debug tests purposes only)
#if 0
GRRect( aPanel->GetClipBox(), aDC, m_BoundaryBox, 0, BROWN );
#endif
}
/* Trace the pads of a module in sketch mode.
* Used to display pads when when the module visibility is set to not visible
* and we want to see pad through.
* The pads must appear on the layers selected in LayerMask
*/
static void Trace_Pads_Only( EDA_DRAW_PANEL* panel, wxDC* DC, MODULE* aModule,
int ox, int oy, LSET aLayerMask, GR_DRAWMODE draw_mode )
{
auto displ_opts = (PCB_DISPLAY_OPTIONS*)( panel->GetDisplayOptions() );
int tmp = displ_opts->m_DisplayPadFill;
displ_opts->m_DisplayPadFill = false;
// Draw pads.
for( D_PAD* pad = aModule->PadsList(); pad; pad = pad->Next() )
{
if( (pad->GetLayerSet() & aLayerMask) == 0 )
continue;
pad->Draw( panel, DC, draw_mode, wxPoint( ox, oy ) );
}
displ_opts->m_DisplayPadFill = tmp;
}
/* Trace the pads of a module in sketch mode.
* Used to display pads when when the module visibility is set to not visible
* and we want to see pad through.
* The pads must appear on the layers selected in LayerMask
*/
static void Trace_Pads_Only( EDA_DRAW_PANEL* panel, wxDC* DC, MODULE* aModule,
int ox, int oy, LAYER_MSK aLayerMask, GR_DRAWMODE draw_mode )
{
PCB_BASE_FRAME* frame = (PCB_BASE_FRAME*) panel->GetParent();
int tmp = frame->m_DisplayPadFill;
frame->m_DisplayPadFill = false;
// Draw pads.
for( D_PAD* pad = aModule->Pads(); pad; pad = pad->Next() )
{
if( (pad->GetLayerMask() & aLayerMask) == 0 )
continue;
pad->Draw( panel, DC, draw_mode, wxPoint( ox, oy ) );
}
frame->m_DisplayPadFill = tmp;
}
void BOARD::DrawHighLight( EDA_DRAW_PANEL* am_canvas, wxDC* DC, int aNetCode )
{
GR_DRAWMODE draw_mode;
if( IsHighLightNetON() )
draw_mode = GR_HIGHLIGHT | GR_OR;
else
draw_mode = GR_AND | GR_HIGHLIGHT;
// Redraw ZONE_CONTAINERS
BOARD::ZONE_CONTAINERS& zones = m_ZoneDescriptorList;
for( BOARD::ZONE_CONTAINERS::iterator zc = zones.begin(); zc!=zones.end(); ++zc )
{
if( (*zc)->GetNet() == aNetCode )
{
(*zc)->Draw( am_canvas, DC, draw_mode );
}
}
// Redraw any pads that have aNetCode
for( MODULE* module = m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( pad->GetNet() == aNetCode )
{
pad->Draw( am_canvas, DC, draw_mode );
}
}
}
// Redraw track and vias that have aNetCode
for( TRACK* seg = m_Track; seg; seg = seg->Next() )
{
if( seg->GetNet() == aNetCode )
{
seg->Draw( am_canvas, DC, draw_mode );
}
}
}
void BOARD::DrawHighLight( EDA_DRAW_PANEL* am_canvas, wxDC* DC, int aNetCode )
{
GR_DRAWMODE draw_mode;
if( IsHighLightNetON() )
draw_mode = GR_HIGHLIGHT | GR_OR;
else
draw_mode = GR_AND | GR_HIGHLIGHT;
// Redraw zones
for( int ii = 0; ii < GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = GetArea( ii );
if( zone->GetNetCode() == aNetCode )
{
zone->Draw( am_canvas, DC, draw_mode );
}
}
// Redraw any pads that have aNetCode
for( MODULE* module = m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->PadsList(); pad; pad = pad->Next() )
{
if( pad->GetNetCode() == aNetCode )
{
pad->Draw( am_canvas, DC, draw_mode );
}
}
}
// Redraw track and vias that have aNetCode
for( TRACK* seg = m_Track; seg; seg = seg->Next() )
{
if( seg->GetNetCode() == aNetCode )
{
seg->Draw( am_canvas, DC, draw_mode );
}
}
}
/* Traces the outline of the search block structures
* The entire block follows the cursor
*/
static void DrawMovingBlockOutlines( EDA_DRAW_PANEL* aPanel, wxDC* aDC, const wxPoint& aPosition,
bool aErase )
{
BASE_SCREEN* screen = aPanel->GetScreen();
FOOTPRINT_EDIT_FRAME* moduleEditFrame = FOOTPRINT_EDIT_FRAME::GetActiveFootprintEditor( aPanel->GetParent() );
wxASSERT( moduleEditFrame );
MODULE* currentModule = moduleEditFrame->GetBoard()->m_Modules;
BLOCK_SELECTOR* block = &screen->m_BlockLocate;
GRSetDrawMode( aDC, g_XorMode );
if( aErase )
{
block->Draw( aPanel, aDC, block->GetMoveVector(), g_XorMode, block->GetColor() );
if( currentModule )
{
wxPoint move_offset = -block->GetMoveVector();
BOARD_ITEM* item = currentModule->GraphicalItems();
for( ; item != NULL; item = item->Next() )
{
if( !item->IsSelected() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
case PCB_MODULE_EDGE_T:
item->Draw( aPanel, aDC, g_XorMode, move_offset );
break;
default:
break;
}
}
D_PAD* pad = currentModule->Pads();
for( ; pad != NULL; pad = pad->Next() )
{
if( !pad->IsSelected() )
continue;
pad->Draw( aPanel, aDC, g_XorMode, move_offset );
}
}
}
// Repaint new view.
block->SetMoveVector( moduleEditFrame->GetCrossHairPosition() - block->GetLastCursorPosition() );
block->Draw( aPanel, aDC, block->GetMoveVector(), g_XorMode, block->GetColor() );
if( currentModule )
{
BOARD_ITEM* item = currentModule->GraphicalItems();
wxPoint move_offset = - block->GetMoveVector();
for( ; item != NULL; item = item->Next() )
{
if( !item->IsSelected() )
continue;
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
case PCB_MODULE_EDGE_T:
item->Draw( aPanel, aDC, g_XorMode, move_offset );
break;
default:
break;
}
}
D_PAD* pad = currentModule->Pads();
for( ; pad != NULL; pad = pad->Next() )
{
if( !pad->IsSelected() )
continue;
pad->Draw( aPanel, aDC, g_XorMode, move_offset );
}
}
}
static void Print_Module( EDA_DRAW_PANEL* aPanel, wxDC* aDC, MODULE* aModule,
GR_DRAWMODE aDraw_mode, LSET aMask,
PRINT_PARAMETERS::DrillShapeOptT aDrillShapeOpt )
{
// Print pads
for( D_PAD* pad = aModule->Pads(); pad; pad = pad->Next() )
{
if( !( pad->GetLayerSet() & aMask ).any() )
continue;
// Manage hole according to the print drill option
wxSize drill_tmp = pad->GetDrillSize();
switch( aDrillShapeOpt )
{
case PRINT_PARAMETERS::NO_DRILL_SHAPE:
pad->SetDrillSize( wxSize(0,0) );
break;
case PRINT_PARAMETERS::SMALL_DRILL_SHAPE:
{
wxSize sz( std::min( SMALL_DRILL, pad->GetDrillSize().x ),
std::min( SMALL_DRILL, pad->GetDrillSize().y ) );
pad->SetDrillSize( sz );
}
break;
case PRINT_PARAMETERS::FULL_DRILL_SHAPE:
// Do nothing
break;
}
pad->Draw( aPanel, aDC, aDraw_mode );
pad->SetDrillSize( drill_tmp );
}
// Print footprint graphic shapes
LSET mlayer( aModule->GetLayer() );
if( aModule->GetLayer() == B_Cu )
mlayer = LSET( B_SilkS );
else if( aModule->GetLayer() == F_Cu )
mlayer = LSET( F_SilkS );
if( ( mlayer & aMask ).any() )
{
if( aModule->Reference().IsVisible() )
aModule->Reference().Draw( aPanel, aDC, aDraw_mode );
if( aModule->Value().IsVisible() )
aModule->Value().Draw( aPanel, aDC, aDraw_mode );
}
for( EDA_ITEM* item = aModule->GraphicalItems(); item; item = item->Next() )
{
switch( item->Type() )
{
case PCB_MODULE_TEXT_T:
{
if( !( mlayer & aMask ).any() )
break;
TEXTE_MODULE* textMod = static_cast<TEXTE_MODULE*>( item );
textMod->Draw( aPanel, aDC, aDraw_mode );
break;
}
case PCB_MODULE_EDGE_T:
{
EDGE_MODULE* edge = static_cast<EDGE_MODULE*>( item );
if( !aMask[edge->GetLayer()] )
break;
edge->Draw( aPanel, aDC, aDraw_mode );
}
break;
default:
break;
}
}
}