void MODULE::CopyNetlistSettings( MODULE* aModule )
{
// Don't do anything foolish like trying to copy to yourself.
wxCHECK_RET( aModule != NULL && aModule != this, wxT( "Cannot copy to NULL or yourself." ) );
// Not sure what to do with the value field. Use netlist for now.
aModule->SetPosition( GetPosition() );
if( aModule->GetLayer() != GetLayer() )
aModule->Flip( aModule->GetPosition() );
if( aModule->GetOrientation() != GetOrientation() )
aModule->Rotate( aModule->GetPosition(), GetOrientation() );
aModule->SetLocalSolderMaskMargin( GetLocalSolderMaskMargin() );
aModule->SetLocalClearance( GetLocalClearance() );
aModule->SetLocalSolderPasteMargin( GetLocalSolderPasteMargin() );
aModule->SetLocalSolderPasteMarginRatio( GetLocalSolderPasteMarginRatio() );
aModule->SetZoneConnection( GetZoneConnection() );
aModule->SetThermalWidth( GetThermalWidth() );
aModule->SetThermalGap( GetThermalGap() );
for( D_PAD* pad = Pads(); pad; pad = pad->Next() )
{
D_PAD* newPad = aModule->FindPadByName( pad->GetPadName() );
if( newPad )
pad->CopyNetlistSettings( newPad );
}
// Not sure about copying description, keywords, 3D models or any other
// local user changes to footprint. Stick with the new footprint settings
// called out in the footprint loaded in the netlist.
aModule->CalculateBoundingBox();
}
unsigned MODULE::GetUniquePadCount( INCLUDE_NPTH_T aIncludeNPTH ) const
{
std::set<wxUint32> usedNames;
// Create a set of used pad numbers
for( D_PAD* pad = Pads(); pad; pad = pad->Next() )
{
// Skip pads not on copper layers (used to build complex
// solder paste shapes for instance)
if( ( pad->GetLayerSet() & LSET::AllCuMask() ).none() )
continue;
// Skip pads with no name, because they are usually "mechanical"
// pads, not "electrical" pads
if( pad->GetPadName().IsEmpty() )
continue;
if( !aIncludeNPTH )
{
// skip NPTH
if( pad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED )
{
continue;
}
}
usedNames.insert( pad->GetPackedPadName() );
}
return usedNames.size();
}
/**
* Send a remote command to Eeschema via a socket,
* @param objectToSync = item to be located on schematic (module, pin or text)
* Commands are
* $PART: "reference" put cursor on component anchor
* $PART: "reference" $PAD: "pad number" put cursor on the component pin
* $PART: "reference" $REF: "reference" put cursor on the component ref
* $PART: "reference" $VAL: "value" put cursor on the component value
*/
void PCB_EDIT_FRAME::SendMessageToEESCHEMA( BOARD_ITEM* objectToSync )
{
char cmd[1024];
const char* text_key;
MODULE* module = NULL;
D_PAD* pad;
TEXTE_MODULE* text_mod;
wxString msg;
if( objectToSync == NULL )
return;
switch( objectToSync->Type() )
{
case PCB_MODULE_T:
module = (MODULE*) objectToSync;
sprintf( cmd, "$PART: \"%s\"", TO_UTF8( module->GetReference() ) );
break;
case PCB_PAD_T:
module = (MODULE*) objectToSync->GetParent();
pad = (D_PAD*) objectToSync;
msg = pad->GetPadName();
sprintf( cmd, "$PART: \"%s\" $PAD: \"%s\"",
TO_UTF8( module->GetReference() ),
TO_UTF8( msg ) );
break;
case PCB_MODULE_TEXT_T:
module = (MODULE*) objectToSync->GetParent();
text_mod = (TEXTE_MODULE*) objectToSync;
if( text_mod->GetType() == TEXTE_MODULE::TEXT_is_REFERENCE )
text_key = "$REF:";
else if( text_mod->GetType() == TEXTE_MODULE::TEXT_is_VALUE )
text_key = "$VAL:";
else
break;
sprintf( cmd, "$PART: \"%s\" %s \"%s\"",
TO_UTF8( module->GetReference() ),
text_key,
TO_UTF8( text_mod->GetText() ) );
break;
default:
break;
}
if( module )
{
SendCommand( MSG_TO_SCH, cmd );
}
}
/*
* Function SetPadNetName
* Update a pad netname using the current footprint
* Line format: ( <pad number> = <net name> )
* Param aText = current line read from netlist
*/
bool NETLIST_READER::SetPadNetName( char* aText )
{
char* p;
char line[256];
if( m_currModule == NULL )
return false;
strncpy( line, aText, sizeof(line) );
if( ( p = strtok( line, " ()\t\n" ) ) == NULL )
return false;
wxString pinName = FROM_UTF8( p );
if( ( p = strtok( NULL, " ()\t\n" ) ) == NULL )
return false;
wxString netName = FROM_UTF8( p );
bool found = false;
for( D_PAD* pad = m_currModule->m_Pads; pad; pad = pad->Next() )
{
wxString padName = pad->GetPadName();
if( padName == pinName )
{
found = true;
if( (char) netName[0] != '?' )
pad->SetNetname( netName );
else
pad->SetNetname( wxEmptyString );
}
}
if( !found )
{
if( m_messageWindow )
{
wxString msg;
msg.Printf( _( "Module [%s]: Pad [%s] not found" ),
GetChars( m_currModule->m_Reference->m_Text ),
GetChars( pinName ) );
m_messageWindow->AppendText( msg + wxT( "\n" ) );
}
}
return found;
}
wxString MODULE::GetNextPadName( bool aFillSequenceGaps ) const
{
std::set<int> usedNumbers;
// Create a set of used pad numbers
for( D_PAD* pad = Pads(); pad; pad = pad->Next() )
{
int padNumber = getTrailingInt( pad->GetPadName() );
usedNumbers.insert( padNumber );
}
const int nextNum = getNextNumberInSequence( usedNumbers, aFillSequenceGaps );
return wxString::Format( wxT( "%i" ), nextNum );
}
void MODULE::CopyNetlistSettings( MODULE* aModule, bool aCopyLocalSettings )
{
// Don't do anything foolish like trying to copy to yourself.
wxCHECK_RET( aModule != NULL && aModule != this, wxT( "Cannot copy to NULL or yourself." ) );
// Not sure what to do with the value field. Use netlist for now.
aModule->SetPosition( GetPosition() );
if( aModule->GetLayer() != GetLayer() )
aModule->Flip( aModule->GetPosition() );
if( aModule->GetOrientation() != GetOrientation() )
aModule->Rotate( aModule->GetPosition(), GetOrientation() );
aModule->SetLocked( IsLocked() );
if( aCopyLocalSettings )
{
aModule->SetLocalSolderMaskMargin( GetLocalSolderMaskMargin() );
aModule->SetLocalClearance( GetLocalClearance() );
aModule->SetLocalSolderPasteMargin( GetLocalSolderPasteMargin() );
aModule->SetLocalSolderPasteMarginRatio( GetLocalSolderPasteMarginRatio() );
aModule->SetZoneConnection( GetZoneConnection() );
aModule->SetThermalWidth( GetThermalWidth() );
aModule->SetThermalGap( GetThermalGap() );
}
for( D_PAD* pad = aModule->Pads(); pad; pad = pad->Next() )
{
// Fix me: if aCopyLocalSettings == true, for "multiple" pads
// (set of pads having the same name/number) this is broken
// because we copy settings from the first pad found.
// When old and new footprints have very few differences, a better
// algo can be used.
D_PAD* oldPad = FindPadByName( pad->GetPadName() );
if( oldPad )
oldPad->CopyNetlistSettings( pad, aCopyLocalSettings );
}
// Not sure about copying description, keywords, 3D models or any other
// local user changes to footprint. Stick with the new footprint settings
// called out in the footprint loaded in the netlist.
aModule->CalculateBoundingBox();
}
/**
* Function idf_export_module
* retrieves information from all board modules, adds drill holes to
* the DRILLED_HOLES or BOARD_OUTLINE section as appropriate,
* compiles data for the PLACEMENT section and compiles data for
* the library ELECTRICAL section.
*/
static void idf_export_module( BOARD* aPcb, MODULE* aModule,
IDF3_BOARD& aIDFBoard )
{
// Reference Designator
std::string crefdes = TO_UTF8( aModule->GetReference() );
if( crefdes.empty() || !crefdes.compare( "~" ) )
{
std::string cvalue = TO_UTF8( aModule->GetValue() );
// if both the RefDes and Value are empty or set to '~' the board owns the part,
// otherwise associated parts of the module must be marked NOREFDES.
if( cvalue.empty() || !cvalue.compare( "~" ) )
crefdes = "BOARD";
else
crefdes = "NOREFDES";
}
// TODO: If module cutouts are supported we must add code here
// for( EDA_ITEM* item = aModule->GraphicalItems(); item != NULL; item = item->Next() )
// {
// if( ( item->Type() != PCB_MODULE_EDGE_T )
// || (item->GetLayer() != Edge_Cuts ) ) continue;
// code to export cutouts
// }
// Export pads
double drill, x, y;
double scale = aIDFBoard.GetUserScale();
IDF3::KEY_PLATING kplate;
std::string pintype;
std::string tstr;
double dx, dy;
aIDFBoard.GetUserOffset( dx, dy );
for( D_PAD* pad = aModule->Pads(); pad; pad = pad->Next() )
{
drill = (double) pad->GetDrillSize().x * scale;
x = pad->GetPosition().x * scale + dx;
y = -pad->GetPosition().y * scale + dy;
// Export the hole on the edge layer
if( drill > 0.0 )
{
// plating
if( pad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED )
kplate = IDF3::NPTH;
else
kplate = IDF3::PTH;
// hole type
tstr = TO_UTF8( pad->GetPadName() );
if( tstr.empty() || !tstr.compare( "0" ) || !tstr.compare( "~" )
|| ( kplate == IDF3::NPTH )
||( pad->GetDrillShape() == PAD_DRILL_SHAPE_OBLONG ) )
pintype = "MTG";
else
pintype = "PIN";
// fields:
// 1. hole dia. : float
// 2. X coord : float
// 3. Y coord : float
// 4. plating : PTH | NPTH
// 5. Assoc. part : BOARD | NOREFDES | PANEL | {"refdes"}
// 6. type : PIN | VIA | MTG | TOOL | { "other" }
// 7. owner : MCAD | ECAD | UNOWNED
if( ( pad->GetDrillShape() == PAD_DRILL_SHAPE_OBLONG )
&& ( pad->GetDrillSize().x != pad->GetDrillSize().y ) )
{
// NOTE: IDF does not have direct support for slots;
// slots are implemented as a board cutout and we
// cannot represent plating or reference designators
double dlength = pad->GetDrillSize().y * scale;
// NOTE: The orientation of modules and pads have
// the opposite sense due to KiCad drawing on a
// screen with a LH coordinate system
double angle = pad->GetOrientation() / 10.0;
// NOTE: Since this code assumes the scenario where
// GetDrillSize().y is the length but idf_parser.cpp
// assumes a length along the X axis, the orientation
// must be shifted +90 deg when GetDrillSize().y is
// the major axis.
if( dlength < drill )
{
std::swap( drill, dlength );
}
else
{
angle += 90.0;
}
// NOTE: KiCad measures a slot's length from end to end
// rather than between the centers of the arcs
dlength -= drill;
aIDFBoard.AddSlot( drill, dlength, angle, x, y );
}
else
{
IDF_DRILL_DATA *dp = new IDF_DRILL_DATA( drill, x, y, kplate, crefdes,
pintype, IDF3::ECAD );
if( !aIDFBoard.AddDrill( dp ) )
{
delete dp;
std::ostringstream ostr;
ostr << __FILE__ << ":" << __LINE__ << ":" << __FUNCTION__;
ostr << "(): could not add drill";
throw std::runtime_error( ostr.str() );
}
}
}
}
// add any valid models to the library item list
std::string refdes;
IDF3_COMPONENT* comp = NULL;
for( S3D_MASTER* modfile = aModule->Models(); modfile != 0; modfile = modfile->Next() )
{
if( !modfile->Is3DType( S3D_MASTER::FILE3D_IDF )
|| modfile->GetShape3DFullFilename().empty() )
continue;
if( refdes.empty() )
{
refdes = TO_UTF8( aModule->GetReference() );
// NOREFDES cannot be used or else the software gets confused
// when writing out the placement data due to conflicting
// placement and layer specifications; to work around this we
// create a (hopefully) unique refdes for our exported part.
if( refdes.empty() || !refdes.compare( "~" ) )
refdes = aIDFBoard.GetNewRefDes();
}
IDF3_COMP_OUTLINE* outline;
outline = aIDFBoard.GetComponentOutline( modfile->GetShape3DFullFilename() );
if( !outline )
throw( std::runtime_error( aIDFBoard.GetError() ) );
double rotz = aModule->GetOrientation()/10.0;
double locx = modfile->m_MatPosition.x * 25.4; // part offsets are in inches
double locy = modfile->m_MatPosition.y * 25.4;
double locz = modfile->m_MatPosition.z * 25.4;
double lrot = modfile->m_MatRotation.z;
bool top = ( aModule->GetLayer() == B_Cu ) ? false : true;
if( top )
{
locy = -locy;
RotatePoint( &locx, &locy, aModule->GetOrientation() );
locy = -locy;
}
if( !top )
{
lrot = -lrot;
RotatePoint( &locx, &locy, aModule->GetOrientation() );
locy = -locy;
rotz = 180.0 - rotz;
if( rotz >= 360.0 )
while( rotz >= 360.0 ) rotz -= 360.0;
if( rotz <= -360.0 )
while( rotz <= -360.0 ) rotz += 360.0;
}
if( comp == NULL )
comp = aIDFBoard.FindComponent( refdes );
if( comp == NULL )
{
comp = new IDF3_COMPONENT( &aIDFBoard );
if( comp == NULL )
throw( std::runtime_error( aIDFBoard.GetError() ) );
comp->SetRefDes( refdes );
if( top )
comp->SetPosition( aModule->GetPosition().x * scale + dx,
-aModule->GetPosition().y * scale + dy,
rotz, IDF3::LYR_TOP );
else
comp->SetPosition( aModule->GetPosition().x * scale + dx,
-aModule->GetPosition().y * scale + dy,
rotz, IDF3::LYR_BOTTOM );
comp->SetPlacement( IDF3::PS_ECAD );
aIDFBoard.AddComponent( comp );
}
else
{
double refX, refY, refA;
IDF3::IDF_LAYER side;
if( ! comp->GetPosition( refX, refY, refA, side ) )
{
// place the item
if( top )
comp->SetPosition( aModule->GetPosition().x * scale + dx,
-aModule->GetPosition().y * scale + dy,
rotz, IDF3::LYR_TOP );
else
comp->SetPosition( aModule->GetPosition().x * scale + dx,
-aModule->GetPosition().y * scale + dy,
rotz, IDF3::LYR_BOTTOM );
comp->SetPlacement( IDF3::PS_ECAD );
}
else
{
// check that the retrieved component matches this one
refX = refX - ( aModule->GetPosition().x * scale + dx );
refY = refY - ( -aModule->GetPosition().y * scale + dy );
refA = refA - rotz;
refA *= refA;
refX *= refX;
refY *= refY;
refX += refY;
// conditions: same side, X,Y coordinates within 10 microns,
// angle within 0.01 degree
if( ( top && side == IDF3::LYR_BOTTOM ) || ( !top && side == IDF3::LYR_TOP )
|| ( refA > 0.0001 ) || ( refX > 0.0001 ) )
{
comp->GetPosition( refX, refY, refA, side );
std::ostringstream ostr;
ostr << "* " << __FILE__ << ":" << __LINE__ << ":" << __FUNCTION__ << "():\n";
ostr << "* conflicting Reference Designator '" << refdes << "'\n";
ostr << "* X loc: " << (aModule->GetPosition().x * scale + dx);
ostr << " vs. " << refX << "\n";
ostr << "* Y loc: " << (-aModule->GetPosition().y * scale + dy);
ostr << " vs. " << refY << "\n";
ostr << "* angle: " << rotz;
ostr << " vs. " << refA << "\n";
if( top )
ostr << "* TOP vs. ";
else
ostr << "* BOTTOM vs. ";
if( side == IDF3::LYR_TOP )
ostr << "TOP";
else
ostr << "BOTTOM";
throw( std::runtime_error( ostr.str() ) );
}
}
}
// create the local data ...
IDF3_COMP_OUTLINE_DATA* data = new IDF3_COMP_OUTLINE_DATA( comp, outline );
data->SetOffsets( locx, locy, locz, lrot );
comp->AddOutlineData( data );
}
return;
}
void DIALOG_PAD_PROPERTIES::PadPropertiesAccept( wxCommandEvent& event )
{
if( !padValuesOK() )
return;
bool rastnestIsChanged = false;
int isign = m_isFlipped ? -1 : 1;
transferDataToPad( m_padMaster );
// m_padMaster is a pattern: ensure there is no net for this pad:
m_padMaster->SetNetCode( NETINFO_LIST::UNCONNECTED );
if( m_currentPad ) // Set current Pad parameters
{
wxSize size;
MODULE* module = m_currentPad->GetParent();
m_parent->SaveCopyInUndoList( module, UR_CHANGED );
module->SetLastEditTime();
// redraw the area where the pad was, without pad (delete pad on screen)
m_currentPad->SetFlags( DO_NOT_DRAW );
m_parent->GetCanvas()->RefreshDrawingRect( m_currentPad->GetBoundingBox() );
m_currentPad->ClearFlags( DO_NOT_DRAW );
// Update values
m_currentPad->SetShape( m_padMaster->GetShape() );
m_currentPad->SetAttribute( m_padMaster->GetAttribute() );
if( m_currentPad->GetPosition() != m_padMaster->GetPosition() )
{
m_currentPad->SetPosition( m_padMaster->GetPosition() );
rastnestIsChanged = true;
}
// compute the pos 0 value, i.e. pad position for module with orientation = 0
// i.e. relative to module origin (module position)
wxPoint pt = m_currentPad->GetPosition() - module->GetPosition();
RotatePoint( &pt, -module->GetOrientation() );
m_currentPad->SetPos0( pt );
m_currentPad->SetOrientation( m_padMaster->GetOrientation() * isign + module->GetOrientation() );
m_currentPad->SetSize( m_padMaster->GetSize() );
size = m_padMaster->GetDelta();
size.y *= isign;
m_currentPad->SetDelta( size );
m_currentPad->SetDrillSize( m_padMaster->GetDrillSize() );
m_currentPad->SetDrillShape( m_padMaster->GetDrillShape() );
wxPoint offset = m_padMaster->GetOffset();
offset.y *= isign;
m_currentPad->SetOffset( offset );
m_currentPad->SetPadToDieLength( m_padMaster->GetPadToDieLength() );
if( m_currentPad->GetLayerSet() != m_padMaster->GetLayerSet() )
{
rastnestIsChanged = true;
m_currentPad->SetLayerSet( m_padMaster->GetLayerSet() );
}
if( m_isFlipped )
m_currentPad->SetLayerSet( FlipLayerMask( m_currentPad->GetLayerSet() ) );
m_currentPad->SetPadName( m_padMaster->GetPadName() );
wxString padNetname;
// For PAD_HOLE_NOT_PLATED, ensure there is no net name selected
if( m_padMaster->GetAttribute() != PAD_HOLE_NOT_PLATED )
padNetname = m_PadNetNameCtrl->GetValue();
if( m_currentPad->GetNetname() != padNetname )
{
const NETINFO_ITEM* netinfo = m_board->FindNet( padNetname );
if( !padNetname.IsEmpty() && netinfo == NULL )
{
DisplayError( NULL, _( "Unknown netname, netname not changed" ) );
}
else
{
rastnestIsChanged = true;
m_currentPad->SetNetCode( netinfo->GetNet() );
}
}
m_currentPad->SetLocalClearance( m_padMaster->GetLocalClearance() );
m_currentPad->SetLocalSolderMaskMargin( m_padMaster->GetLocalSolderMaskMargin() );
m_currentPad->SetLocalSolderPasteMargin( m_padMaster->GetLocalSolderPasteMargin() );
m_currentPad->SetLocalSolderPasteMarginRatio( m_padMaster->GetLocalSolderPasteMarginRatio() );
m_currentPad->SetZoneConnection( m_padMaster->GetZoneConnection() );
m_currentPad->SetThermalWidth( m_padMaster->GetThermalWidth() );
m_currentPad->SetThermalGap( m_padMaster->GetThermalGap() );
module->CalculateBoundingBox();
m_parent->SetMsgPanel( m_currentPad );
// redraw the area where the pad was
m_parent->GetCanvas()->RefreshDrawingRect( m_currentPad->GetBoundingBox() );
m_parent->OnModify();
}
EndModal( wxID_OK );
if( rastnestIsChanged ) // The net ratsnest must be recalculated
m_board->m_Status_Pcb = 0;
}
void DIALOG_PAD_PROPERTIES::initValues()
{
wxString msg;
double angle;
// Disable pad net name wxTextCtrl if the caller is the footprint editor
// because nets are living only in the board managed by the board editor
m_canEditNetName = m_parent->IsType( FRAME_PCB );
// Setup layers names from board
// Should be made first, before calling m_rbCopperLayersSel->SetSelection()
m_rbCopperLayersSel->SetString( 0, m_board->GetLayerName( F_Cu ) );
m_rbCopperLayersSel->SetString( 1, m_board->GetLayerName( B_Cu ) );
m_PadLayerAdhCmp->SetLabel( m_board->GetLayerName( F_Adhes ) );
m_PadLayerAdhCu->SetLabel( m_board->GetLayerName( B_Adhes ) );
m_PadLayerPateCmp->SetLabel( m_board->GetLayerName( F_Paste ) );
m_PadLayerPateCu->SetLabel( m_board->GetLayerName( B_Paste ) );
m_PadLayerSilkCmp->SetLabel( m_board->GetLayerName( F_SilkS ) );
m_PadLayerSilkCu->SetLabel( m_board->GetLayerName( B_SilkS ) );
m_PadLayerMaskCmp->SetLabel( m_board->GetLayerName( F_Mask ) );
m_PadLayerMaskCu->SetLabel( m_board->GetLayerName( B_Mask ) );
m_PadLayerECO1->SetLabel( m_board->GetLayerName( Eco1_User ) );
m_PadLayerECO2->SetLabel( m_board->GetLayerName( Eco2_User ) );
m_PadLayerDraft->SetLabel( m_board->GetLayerName( Dwgs_User ) );
m_isFlipped = false;
if( m_currentPad )
{
MODULE* module = m_currentPad->GetParent();
if( module->GetLayer() == B_Cu )
{
m_isFlipped = true;
m_staticModuleSideValue->SetLabel( _( "Back side (footprint is mirrored)" ) );
}
msg.Printf( wxT( "%.1f" ), module->GetOrientation() / 10.0 );
m_staticModuleRotValue->SetLabel( msg );
}
if( m_isFlipped )
{
wxPoint pt = m_dummyPad->GetOffset();
NEGATE( pt.y );
m_dummyPad->SetOffset( pt );
wxSize sz = m_dummyPad->GetDelta();
NEGATE( sz.y );
m_dummyPad->SetDelta( sz );
// flip pad's layers
m_dummyPad->SetLayerSet( FlipLayerMask( m_dummyPad->GetLayerSet() ) );
}
m_staticTextWarningPadFlipped->Show(m_isFlipped);
m_PadNumCtrl->SetValue( m_dummyPad->GetPadName() );
m_PadNetNameCtrl->SetValue( m_dummyPad->GetNetname() );
// Display current unit name in dialog:
m_PadPosX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadPosY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadDrill_X_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadDrill_Y_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeSizeX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeSizeY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeOffsetX_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeOffsetY_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadShapeDelta_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_PadLengthDie_Unit->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
// Display current pad masks clearances units
m_NetClearanceUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderMaskMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_SolderPasteMarginUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_ThermalWidthUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
m_ThermalGapUnits->SetLabel( GetAbbreviatedUnitsLabel( g_UserUnit ) );
// Display current pad parameters units:
PutValueInLocalUnits( *m_PadPosition_X_Ctrl, m_dummyPad->GetPosition().x );
PutValueInLocalUnits( *m_PadPosition_Y_Ctrl, m_dummyPad->GetPosition().y );
PutValueInLocalUnits( *m_PadDrill_X_Ctrl, m_dummyPad->GetDrillSize().x );
PutValueInLocalUnits( *m_PadDrill_Y_Ctrl, m_dummyPad->GetDrillSize().y );
PutValueInLocalUnits( *m_ShapeSize_X_Ctrl, m_dummyPad->GetSize().x );
PutValueInLocalUnits( *m_ShapeSize_Y_Ctrl, m_dummyPad->GetSize().y );
PutValueInLocalUnits( *m_ShapeOffset_X_Ctrl, m_dummyPad->GetOffset().x );
PutValueInLocalUnits( *m_ShapeOffset_Y_Ctrl, m_dummyPad->GetOffset().y );
if( m_dummyPad->GetDelta().x )
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().x );
m_trapDeltaDirChoice->SetSelection( 0 );
}
else
{
PutValueInLocalUnits( *m_ShapeDelta_Ctrl, m_dummyPad->GetDelta().y );
m_trapDeltaDirChoice->SetSelection( 1 );
}
PutValueInLocalUnits( *m_LengthPadToDieCtrl, m_dummyPad->GetPadToDieLength() );
PutValueInLocalUnits( *m_NetClearanceValueCtrl, m_dummyPad->GetLocalClearance() );
PutValueInLocalUnits( *m_SolderMaskMarginCtrl, m_dummyPad->GetLocalSolderMaskMargin() );
PutValueInLocalUnits( *m_ThermalWidthCtrl, m_dummyPad->GetThermalWidth() );
PutValueInLocalUnits( *m_ThermalGapCtrl, m_dummyPad->GetThermalGap() );
// These 2 parameters are usually < 0, so prepare entering a negative value, if current is 0
PutValueInLocalUnits( *m_SolderPasteMarginCtrl, m_dummyPad->GetLocalSolderPasteMargin() );
if( m_dummyPad->GetLocalSolderPasteMargin() == 0 )
m_SolderPasteMarginCtrl->SetValue( wxT( "-" ) + m_SolderPasteMarginCtrl->GetValue() );
msg.Printf( wxT( "%f" ), m_dummyPad->GetLocalSolderPasteMarginRatio() * 100.0 );
if( m_dummyPad->GetLocalSolderPasteMarginRatio() == 0.0 && msg[0] == '0' )
// Sometimes Printf adds a sign if the value is small
m_SolderPasteMarginRatioCtrl->SetValue( wxT( "-" ) + msg );
else
m_SolderPasteMarginRatioCtrl->SetValue( msg );
switch( m_dummyPad->GetZoneConnection() )
{
default:
case UNDEFINED_CONNECTION:
m_ZoneConnectionChoice->SetSelection( 0 );
break;
case PAD_IN_ZONE:
m_ZoneConnectionChoice->SetSelection( 1 );
break;
case THERMAL_PAD:
m_ZoneConnectionChoice->SetSelection( 2 );
break;
case PAD_NOT_IN_ZONE:
m_ZoneConnectionChoice->SetSelection( 3 );
break;
}
if( m_currentPad )
{
MODULE* module = m_currentPad->GetParent();
angle = m_currentPad->GetOrientation() - module->GetOrientation();
if( m_isFlipped )
NEGATE( angle );
m_dummyPad->SetOrientation( angle );
}
angle = m_dummyPad->GetOrientation();
NORMALIZE_ANGLE_180( angle ); // ? normalizing is in D_PAD::SetOrientation()
// Set layers used by this pad: :
setPadLayersList( m_dummyPad->GetLayerSet() );
// Pad Orient
switch( int( angle ) )
{
case 0:
m_PadOrient->SetSelection( 0 );
break;
case 900:
m_PadOrient->SetSelection( 1 );
break;
case -900:
m_PadOrient->SetSelection( 2 );
break;
case 1800:
case -1800:
m_PadOrient->SetSelection( 3 );
break;
default:
m_PadOrient->SetSelection( 4 );
break;
}
switch( m_dummyPad->GetShape() )
{
default:
case PAD_CIRCLE:
m_PadShape->SetSelection( 0 );
break;
case PAD_OVAL:
m_PadShape->SetSelection( 1 );
break;
case PAD_RECT:
m_PadShape->SetSelection( 2 );
break;
case PAD_TRAPEZOID:
m_PadShape->SetSelection( 3 );
break;
}
msg.Printf( wxT( "%g" ), angle );
m_PadOrientCtrl->SetValue( msg );
// Type of pad selection
m_PadType->SetSelection( 0 );
for( unsigned ii = 0; ii < DIM( code_type ); ii++ )
{
if( code_type[ii] == m_dummyPad->GetAttribute() )
{
m_PadType->SetSelection( ii );
break;
}
}
// Enable/disable Pad name,and pad length die
// (disable for NPTH pads (mechanical pads)
bool enable = m_dummyPad->GetAttribute() != PAD_HOLE_NOT_PLATED;
m_PadNumCtrl->Enable( enable );
m_PadNetNameCtrl->Enable( m_canEditNetName && enable && m_currentPad != NULL );
m_LengthPadToDieCtrl->Enable( enable );
if( m_dummyPad->GetDrillShape() != PAD_DRILL_OBLONG )
m_DrillShapeCtrl->SetSelection( 0 );
else
m_DrillShapeCtrl->SetSelection( 1 );
// Update some dialog widgets state (Enable/disable options):
wxCommandEvent cmd_event;
setPadLayersList( m_dummyPad->GetLayerSet() );
OnDrillShapeSelected( cmd_event );
OnPadShapeSelection( cmd_event );
}
bool BOARD_NETLIST_UPDATER::deleteSinglePadNets()
{
int count = 0;
wxString netname;
wxString msg;
D_PAD* pad = NULL;
D_PAD* previouspad = NULL;
// We need the pad list, for next tests.
// padlist is the list of pads, sorted by netname.
m_board->BuildListOfNets();
if( m_isDryRun )
return false;
std::vector<D_PAD*> padlist = m_board->GetPads();
for( unsigned kk = 0; kk < padlist.size(); kk++ )
{
pad = padlist[kk];
if( pad->GetNetname().IsEmpty() )
continue;
if( netname != pad->GetNetname() ) // End of net
{
if( previouspad && count == 1 )
{
// First, see if we have a copper zone attached to this pad.
// If so, this is not really a single pad net
for( int ii = 0; ii < m_board->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = m_board->GetArea( ii );
if( !zone->IsOnCopperLayer() )
continue;
if( zone->GetIsKeepout() )
continue;
if( zone->GetNet() == previouspad->GetNet() )
{
count++;
break;
}
}
if( count == 1 ) // Really one pad, and nothing else
{
msg.Printf( _( "Remove single pad net %s." ),
GetChars( previouspad->GetNetname() ) );
m_reporter->Report( msg, REPORTER::RPT_ACTION );
msg.Printf( _( "Remove single pad net \"%s\" on \"%s\" pad '%s'\n" ),
GetChars( previouspad->GetNetname() ),
GetChars( previouspad->GetParent()->GetReference() ),
GetChars( previouspad->GetPadName() ) );
m_reporter->Report( msg, REPORTER::RPT_ACTION );
previouspad->SetNetCode( NETINFO_LIST::UNCONNECTED );
}
}
netname = pad->GetNetname();
count = 1;
}
else
{
count++;
}
previouspad = pad;
}
// Examine last pad
if( pad && count == 1 )
pad->SetNetCode( NETINFO_LIST::UNCONNECTED );
return true;
}
bool BOARD_NETLIST_UPDATER::updateComponentPadConnections( MODULE* aPcbComponent, COMPONENT* aNewComponent )
{
wxString msg;
bool changed = false;
MODULE* copy = (MODULE*) aPcbComponent->Clone();
// At this point, the component footprint is updated. Now update the nets.
for( D_PAD* pad = aPcbComponent->Pads(); pad; pad = pad->Next() )
{
COMPONENT_NET net = aNewComponent->GetNet( pad->GetPadName() );
if( !net.IsValid() ) // New footprint pad has no net.
{
if( !pad->GetNetname().IsEmpty() )
{
msg.Printf( _( "Disconnect component %s pin %s.\n" ),
GetChars( aPcbComponent->GetReference() ),
GetChars( pad->GetPadName() ) );
m_reporter->Report( msg, REPORTER::RPT_ACTION );
msg.Printf( _( "Clearing component \"%s:%s\" pin \"%s\" net name.\n" ),
GetChars( aPcbComponent->GetReference() ),
GetChars( aPcbComponent->GetPath() ),
GetChars( pad->GetPadName() ) );
m_reporter->Report( msg, REPORTER::RPT_INFO );
}
if( !m_isDryRun )
{
changed = true;
pad->SetNetCode( NETINFO_LIST::UNCONNECTED );
}
}
else // New footprint pad has a net.
{
if( net.GetNetName() != pad->GetNetname() )
{
const wxString& netName = net.GetNetName();
NETINFO_ITEM* netinfo = m_board->FindNet( netName );
if( netinfo == nullptr )
{
// It might be a new net that has not been added to the board yet
auto netIt = m_addedNets.find( netName );
if( netIt != m_addedNets.end() )
netinfo = netIt->second;
}
if( netinfo == nullptr )
{
// It is a new net, we have to add it
if( !m_isDryRun )
{
changed = true;
netinfo = new NETINFO_ITEM( m_board, netName );
m_commit.Add( netinfo );
m_addedNets[netName] = netinfo;
}
msg.Printf( _( "Add net %s.\n" ), GetChars( netName ) );
m_reporter->Report( msg, REPORTER::RPT_ACTION );
}
if( !pad->GetNetname().IsEmpty() )
{
msg.Printf( _( "Reconnect component %s pin %s from net %s to net %s.\n"),
GetChars( aPcbComponent->GetReference() ),
GetChars( pad->GetPadName() ),
GetChars( pad->GetNetname() ),
GetChars( netName ) );
} else {
msg.Printf( _( "Connect component %s pin %s to net %s.\n"),
GetChars( aPcbComponent->GetReference() ),
GetChars( pad->GetPadName() ),
GetChars( netName ) );
}
m_reporter->Report( msg, REPORTER::RPT_ACTION );
msg.Printf( _( "Changing component \"%s:%s\" pin \"%s\" net name from "
"\"%s\" to \"%s\".\n" ),
GetChars( aPcbComponent->GetReference() ),
GetChars( aPcbComponent->GetPath() ),
GetChars( pad->GetPadName() ),
GetChars( pad->GetNetname() ),
GetChars( netName ) );
m_reporter->Report( msg, REPORTER::RPT_INFO );
if( !m_isDryRun )
{
changed = true;
pad->SetNet( netinfo );
}
}
}
}
if( changed )
m_commit.Modified( aPcbComponent, copy );
else
delete copy;
return true;
}