void MemoryInstrumenter::instrumentPointerInstruction(Instruction *I) {
BasicBlock::iterator Loc;
if (isa<PHINode>(I)) {
// Cannot insert hooks right after a PHI, because PHINodes have to be
// grouped together.
Loc = I->getParent()->getFirstNonPHI();
} else if (!I->isTerminator()) {
Loc = I;
++Loc;
} else {
assert(isa<InvokeInst>(I));
InvokeInst *II = cast<InvokeInst>(I);
BasicBlock *NormalDest = II->getNormalDest();
// It's not always OK to insert HookTopLevel simply at the beginning of the
// normal destination, because the normal destionation may be shared by
// multiple InvokeInsts. In that case, we will create a critical edge block,
// and add the HookTopLevel over there.
if (NormalDest->getUniquePredecessor()) {
Loc = NormalDest->getFirstNonPHI();
} else {
BasicBlock *CritEdge = BasicBlock::Create(I->getContext(),
"crit_edge",
I->getParent()->getParent());
Loc = BranchInst::Create(NormalDest, CritEdge);
// Now that CritEdge becomes the new predecessor of NormalDest, replace
// all phi uses of I->getParent() with CritEdge.
for (auto J = NormalDest->begin();
NormalDest->getFirstNonPHI() != J;
++J) {
PHINode *Phi = cast<PHINode>(J);
int i;
while ((i = Phi->getBasicBlockIndex(I->getParent())) >= 0)
Phi->setIncomingBlock(i, CritEdge);
}
II->setNormalDest(CritEdge);
}
}
if (LoadInst *LI = dyn_cast<LoadInst>(I))
instrumentPointer(I, LI->getPointerOperand(), Loc);
else
instrumentPointer(I, NULL, Loc);
}
/// Replaces the given call site (Call or Invoke) with a gc.statepoint
/// intrinsic with an empty deoptimization arguments list. This does
/// NOT do explicit relocation for GC support.
static Value *ReplaceWithStatepoint(const CallSite &CS /* to replace */) {
assert(CS.getInstruction()->getModule() && "must be set");
// TODO: technically, a pass is not allowed to get functions from within a
// function pass since it might trigger a new function addition. Refactor
// this logic out to the initialization of the pass. Doesn't appear to
// matter in practice.
// Then go ahead and use the builder do actually do the inserts. We insert
// immediately before the previous instruction under the assumption that all
// arguments will be available here. We can't insert afterwards since we may
// be replacing a terminator.
IRBuilder<> Builder(CS.getInstruction());
// Note: The gc args are not filled in at this time, that's handled by
// RewriteStatepointsForGC (which is currently under review).
// Create the statepoint given all the arguments
Instruction *Token = nullptr;
uint64_t ID;
uint32_t NumPatchBytes;
AttributeSet OriginalAttrs = CS.getAttributes();
Attribute AttrID =
OriginalAttrs.getAttribute(AttributeSet::FunctionIndex, "statepoint-id");
Attribute AttrNumPatchBytes = OriginalAttrs.getAttribute(
AttributeSet::FunctionIndex, "statepoint-num-patch-bytes");
AttrBuilder AttrsToRemove;
bool HasID = AttrID.isStringAttribute() &&
!AttrID.getValueAsString().getAsInteger(10, ID);
if (HasID)
AttrsToRemove.addAttribute("statepoint-id");
else
ID = 0xABCDEF00;
bool HasNumPatchBytes =
AttrNumPatchBytes.isStringAttribute() &&
!AttrNumPatchBytes.getValueAsString().getAsInteger(10, NumPatchBytes);
if (HasNumPatchBytes)
AttrsToRemove.addAttribute("statepoint-num-patch-bytes");
else
NumPatchBytes = 0;
OriginalAttrs = OriginalAttrs.removeAttributes(
CS.getInstruction()->getContext(), AttributeSet::FunctionIndex,
AttrsToRemove);
if (CS.isCall()) {
CallInst *ToReplace = cast<CallInst>(CS.getInstruction());
CallInst *Call = Builder.CreateGCStatepointCall(
ID, NumPatchBytes, CS.getCalledValue(),
makeArrayRef(CS.arg_begin(), CS.arg_end()), None, None,
"safepoint_token");
Call->setTailCall(ToReplace->isTailCall());
Call->setCallingConv(ToReplace->getCallingConv());
// In case if we can handle this set of attributes - set up function
// attributes directly on statepoint and return attributes later for
// gc_result intrinsic.
Call->setAttributes(OriginalAttrs.getFnAttributes());
Token = Call;
// Put the following gc_result and gc_relocate calls immediately after
// the old call (which we're about to delete).
assert(ToReplace->getNextNode() && "not a terminator, must have next");
Builder.SetInsertPoint(ToReplace->getNextNode());
Builder.SetCurrentDebugLocation(ToReplace->getNextNode()->getDebugLoc());
} else if (CS.isInvoke()) {
InvokeInst *ToReplace = cast<InvokeInst>(CS.getInstruction());
// Insert the new invoke into the old block. We'll remove the old one in a
// moment at which point this will become the new terminator for the
// original block.
Builder.SetInsertPoint(ToReplace->getParent());
InvokeInst *Invoke = Builder.CreateGCStatepointInvoke(
ID, NumPatchBytes, CS.getCalledValue(), ToReplace->getNormalDest(),
ToReplace->getUnwindDest(), makeArrayRef(CS.arg_begin(), CS.arg_end()),
None, None, "safepoint_token");
Invoke->setCallingConv(ToReplace->getCallingConv());
// In case if we can handle this set of attributes - set up function
// attributes directly on statepoint and return attributes later for
// gc_result intrinsic.
Invoke->setAttributes(OriginalAttrs.getFnAttributes());
Token = Invoke;
// We'll insert the gc.result into the normal block
BasicBlock *NormalDest = ToReplace->getNormalDest();
// Can not insert gc.result in case of phi nodes preset.
// Should have removed this cases prior to running this function
assert(!isa<PHINode>(NormalDest->begin()));
Instruction *IP = &*(NormalDest->getFirstInsertionPt());
Builder.SetInsertPoint(IP);
} else {
llvm_unreachable("unexpect type of CallSite");
}
assert(Token);
// Handle the return value of the original call - update all uses to use a
// gc_result hanging off the statepoint node we just inserted
// Only add the gc_result iff there is actually a used result
if (!CS.getType()->isVoidTy() && !CS.getInstruction()->use_empty()) {
std::string TakenName =
CS.getInstruction()->hasName() ? CS.getInstruction()->getName() : "";
CallInst *GCResult = Builder.CreateGCResult(Token, CS.getType(), TakenName);
GCResult->setAttributes(OriginalAttrs.getRetAttributes());
return GCResult;
} else {
// No return value for the call.
return nullptr;
}
}
// First thing we need to do is scan the whole function for values that are
// live across unwind edges. Each value that is live across an unwind edge
// we spill into a stack location, guaranteeing that there is nothing live
// across the unwind edge. This process also splits all critical edges
// coming out of invoke's.
void LowerInvoke::
splitLiveRangesLiveAcrossInvokes(std::vector<InvokeInst*> &Invokes) {
// First step, split all critical edges from invoke instructions.
for (unsigned i = 0, e = Invokes.size(); i != e; ++i) {
InvokeInst *II = Invokes[i];
SplitCriticalEdge(II, 0, this);
SplitCriticalEdge(II, 1, this);
assert(!isa<PHINode>(II->getNormalDest()) &&
!isa<PHINode>(II->getUnwindDest()) &&
"critical edge splitting left single entry phi nodes?");
}
Function *F = Invokes.back()->getParent()->getParent();
// To avoid having to handle incoming arguments specially, we lower each arg
// to a copy instruction in the entry block. This ensures that the argument
// value itself cannot be live across the entry block.
BasicBlock::iterator AfterAllocaInsertPt = F->begin()->begin();
while (isa<AllocaInst>(AfterAllocaInsertPt) &&
isa<ConstantInt>(cast<AllocaInst>(AfterAllocaInsertPt)->getArraySize()))
++AfterAllocaInsertPt;
for (Function::arg_iterator AI = F->arg_begin(), E = F->arg_end();
AI != E; ++AI) {
// This is always a no-op cast because we're casting AI to AI->getType() so
// src and destination types are identical. BitCast is the only possibility.
CastInst *NC = new BitCastInst(
AI, AI->getType(), AI->getName()+".tmp", AfterAllocaInsertPt);
AI->replaceAllUsesWith(NC);
// Normally its is forbidden to replace a CastInst's operand because it
// could cause the opcode to reflect an illegal conversion. However, we're
// replacing it here with the same value it was constructed with to simply
// make NC its user.
NC->setOperand(0, AI);
}
// Finally, scan the code looking for instructions with bad live ranges.
for (Function::iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
for (BasicBlock::iterator II = BB->begin(), E = BB->end(); II != E; ++II) {
// Ignore obvious cases we don't have to handle. In particular, most
// instructions either have no uses or only have a single use inside the
// current block. Ignore them quickly.
Instruction *Inst = II;
if (Inst->use_empty()) continue;
if (Inst->hasOneUse() &&
cast<Instruction>(Inst->use_back())->getParent() == BB &&
!isa<PHINode>(Inst->use_back())) continue;
// If this is an alloca in the entry block, it's not a real register
// value.
if (AllocaInst *AI = dyn_cast<AllocaInst>(Inst))
if (isa<ConstantInt>(AI->getArraySize()) && BB == F->begin())
continue;
// Avoid iterator invalidation by copying users to a temporary vector.
std::vector<Instruction*> Users;
for (Value::use_iterator UI = Inst->use_begin(), E = Inst->use_end();
UI != E; ++UI) {
Instruction *User = cast<Instruction>(*UI);
if (User->getParent() != BB || isa<PHINode>(User))
Users.push_back(User);
}
// Scan all of the uses and see if the live range is live across an unwind
// edge. If we find a use live across an invoke edge, create an alloca
// and spill the value.
std::set<InvokeInst*> InvokesWithStoreInserted;
// Find all of the blocks that this value is live in.
std::set<BasicBlock*> LiveBBs;
LiveBBs.insert(Inst->getParent());
while (!Users.empty()) {
Instruction *U = Users.back();
Users.pop_back();
if (!isa<PHINode>(U)) {
MarkBlocksLiveIn(U->getParent(), LiveBBs);
} else {
// Uses for a PHI node occur in their predecessor block.
PHINode *PN = cast<PHINode>(U);
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
if (PN->getIncomingValue(i) == Inst)
MarkBlocksLiveIn(PN->getIncomingBlock(i), LiveBBs);
}
}
// Now that we know all of the blocks that this thing is live in, see if
// it includes any of the unwind locations.
bool NeedsSpill = false;
for (unsigned i = 0, e = Invokes.size(); i != e; ++i) {
BasicBlock *UnwindBlock = Invokes[i]->getUnwindDest();
if (UnwindBlock != BB && LiveBBs.count(UnwindBlock)) {
NeedsSpill = true;
}
}
// If we decided we need a spill, do it.
if (NeedsSpill) {
++NumSpilled;
DemoteRegToStack(*Inst, true);
}
}
}
bool CSDataRando::processCallSite(CallSite CS, FuncInfo &FI, PointerEquivalenceAnalysis &P, DSGraph *G) {
bool IndirectCall = !isa<Function>(CS.getCalledValue()->stripPointerCasts());
if (IndirectCall) { NumIndirectCalls++; }
CallSite OriginalCS = originalCallSite(FI, CS);
if (!DSA->canEncryptCall(OriginalCS)) {
if (IndirectCall) { NumIndirectCantEncrypt++; }
return false;
}
DSCallSite DSCS = G->getDSCallSiteForCallSite(OriginalCS);
const Function *Callee = getEffectiveCallee(DSCS, FI, G);
if (!Callee) {
if (IndirectCall) { NumIndirectCantEncrypt++; }
return false;
}
FuncInfo &CalleeInfo = FunctionInfo[Callee];
Value *Clone = getCloneCalledValue(CS, CalleeInfo);
if (!Clone || CalleeInfo.ArgNodes.empty()) {
if (IndirectCall) { NumIndirectCantEncrypt++; }
return false;
}
// We create a mapping of the formal argument nodes in the callee function and
// actual argument nodes in the caller function's graph.
DSGraph::NodeMapTy NodeMap;
DSGraph *CalleeG = DSA->getDSGraph(*Callee);
// getArgNodesForCall places the return node and the vanode in the
// first two slots of the vector, followed by the nodes for the regular
// pointer arguments.
std::vector<DSNodeHandle> ArgNodes;
getArgNodesForCall(CalleeG, DSCS, ArgNodes);
// First the return value
DSNodeHandle CalleeRetNode = ArgNodes[0];
DSGraph::computeNodeMapping(CalleeRetNode, DSCS.getRetVal(), NodeMap);
// Then VarArgs
DSNodeHandle CalleeVarArgNode = ArgNodes[1];
DSGraph::computeNodeMapping(CalleeVarArgNode, DSCS.getVAVal(), NodeMap);
// And last the regular arguments.
for (unsigned int i = 0; i < DSCS.getNumPtrArgs() && i + 2 < ArgNodes.size(); i++) {
DSGraph::computeNodeMapping(ArgNodes[i + 2], DSCS.getPtrArg(i), NodeMap);
}
// Collect the arguments and masks to pass to call
SmallVector<Value*, 8> Args;
unsigned int i = 0;
for (unsigned int e = CS.getFunctionType()->getNumParams(); i < e; i++) {
Args.push_back(CS.getArgOperand(i));
}
for (const DSNode *N : CalleeInfo.ArgNodes) {
Value *Mask = P.getMaskForNode(NodeMap[N]);
Args.push_back(Mask);
}
// VarArgs go after masks
for (unsigned int e = CS.arg_size(); i < e; i++) {
Args.push_back(CS.getArgOperand(i));
}
// Do replacement
Instruction *CI = CS.getInstruction();
Value *Call;
if (CS.isCall()) {
Call = CallInst::Create(Clone, Args, "", CI);
} else {
InvokeInst *II = cast<InvokeInst>(CI);
Call = InvokeInst::Create(Clone, II->getNormalDest(), II->getUnwindDest(), Args, "", II);
}
CallSite NewCS(Call);
NewCS.setCallingConv(CS.getCallingConv());
CI->replaceAllUsesWith(Call);
P.replace(CI, Call);
CI->eraseFromParent();
return true;
}
/// Replaces the given call site (Call or Invoke) with a gc.statepoint
/// intrinsic with an empty deoptimization arguments list. This does
/// NOT do explicit relocation for GC support.
static Value *ReplaceWithStatepoint(const CallSite &CS, /* to replace */
Pass *P) {
BasicBlock *BB = CS.getInstruction()->getParent();
Function *F = BB->getParent();
Module *M = F->getParent();
assert(M && "must be set");
// TODO: technically, a pass is not allowed to get functions from within a
// function pass since it might trigger a new function addition. Refactor
// this logic out to the initialization of the pass. Doesn't appear to
// matter in practice.
// Fill in the one generic type'd argument (the function is also vararg)
std::vector<Type *> argTypes;
argTypes.push_back(CS.getCalledValue()->getType());
Function *gc_statepoint_decl = Intrinsic::getDeclaration(
M, Intrinsic::experimental_gc_statepoint, argTypes);
// Then go ahead and use the builder do actually do the inserts. We insert
// immediately before the previous instruction under the assumption that all
// arguments will be available here. We can't insert afterwards since we may
// be replacing a terminator.
Instruction *insertBefore = CS.getInstruction();
IRBuilder<> Builder(insertBefore);
// First, create the statepoint (with all live ptrs as arguments).
std::vector<llvm::Value *> args;
// target, #args, unused, args
Value *Target = CS.getCalledValue();
args.push_back(Target);
int callArgSize = CS.arg_size();
args.push_back(
ConstantInt::get(Type::getInt32Ty(M->getContext()), callArgSize));
// TODO: add a 'Needs GC-rewrite' later flag
args.push_back(ConstantInt::get(Type::getInt32Ty(M->getContext()), 0));
// Copy all the arguments of the original call
args.insert(args.end(), CS.arg_begin(), CS.arg_end());
// Create the statepoint given all the arguments
Instruction *token = nullptr;
AttributeSet return_attributes;
if (CS.isCall()) {
CallInst *toReplace = cast<CallInst>(CS.getInstruction());
CallInst *call =
Builder.CreateCall(gc_statepoint_decl, args, "safepoint_token");
call->setTailCall(toReplace->isTailCall());
call->setCallingConv(toReplace->getCallingConv());
// Before we have to worry about GC semantics, all attributes are legal
AttributeSet new_attrs = toReplace->getAttributes();
// In case if we can handle this set of sttributes - set up function attrs
// directly on statepoint and return attrs later for gc_result intrinsic.
call->setAttributes(new_attrs.getFnAttributes());
return_attributes = new_attrs.getRetAttributes();
// TODO: handle param attributes
token = call;
// Put the following gc_result and gc_relocate calls immediately after the
// the old call (which we're about to delete)
BasicBlock::iterator next(toReplace);
assert(BB->end() != next && "not a terminator, must have next");
next++;
Instruction *IP = &*(next);
Builder.SetInsertPoint(IP);
Builder.SetCurrentDebugLocation(IP->getDebugLoc());
} else if (CS.isInvoke()) {
InvokeInst *toReplace = cast<InvokeInst>(CS.getInstruction());
// Insert the new invoke into the old block. We'll remove the old one in a
// moment at which point this will become the new terminator for the
// original block.
InvokeInst *invoke = InvokeInst::Create(
gc_statepoint_decl, toReplace->getNormalDest(),
toReplace->getUnwindDest(), args, "", toReplace->getParent());
invoke->setCallingConv(toReplace->getCallingConv());
// Currently we will fail on parameter attributes and on certain
// function attributes.
AttributeSet new_attrs = toReplace->getAttributes();
// In case if we can handle this set of sttributes - set up function attrs
// directly on statepoint and return attrs later for gc_result intrinsic.
invoke->setAttributes(new_attrs.getFnAttributes());
return_attributes = new_attrs.getRetAttributes();
token = invoke;
// We'll insert the gc.result into the normal block
BasicBlock *normalDest = normalizeBBForInvokeSafepoint(
toReplace->getNormalDest(), invoke->getParent());
Instruction *IP = &*(normalDest->getFirstInsertionPt());
Builder.SetInsertPoint(IP);
} else {
llvm_unreachable("unexpect type of CallSite");
}
assert(token);
// Handle the return value of the original call - update all uses to use a
// gc_result hanging off the statepoint node we just inserted
// Only add the gc_result iff there is actually a used result
if (!CS.getType()->isVoidTy() && !CS.getInstruction()->use_empty()) {
Instruction *gc_result = nullptr;
std::vector<Type *> types; // one per 'any' type
types.push_back(CS.getType()); // result type
auto get_gc_result_id = [&](Type &Ty) {
if (Ty.isIntegerTy()) {
return Intrinsic::experimental_gc_result_int;
} else if (Ty.isFloatingPointTy()) {
return Intrinsic::experimental_gc_result_float;
} else if (Ty.isPointerTy()) {
return Intrinsic::experimental_gc_result_ptr;
} else {
llvm_unreachable("non java type encountered");
}
};
Intrinsic::ID Id = get_gc_result_id(*CS.getType());
Value *gc_result_func = Intrinsic::getDeclaration(M, Id, types);
std::vector<Value *> args;
args.push_back(token);
gc_result = Builder.CreateCall(
gc_result_func, args,
CS.getInstruction()->hasName() ? CS.getInstruction()->getName() : "");
cast<CallInst>(gc_result)->setAttributes(return_attributes);
return gc_result;
} else {
// No return value for the call.
return nullptr;
}
}
// Specialize F by replacing the arguments (keys) in replacements with the
// constants (values). Replace all calls to F with those constants with
// a call to the specialized function. Returns the specialized function
static Function*
SpecializeFunction(Function* F,
ValueMap<const Value*, Value*>& replacements) {
// arg numbers of deleted arguments
DenseMap<unsigned, const Argument*> deleted;
for (ValueMap<const Value*, Value*>::iterator
repb = replacements.begin(), repe = replacements.end();
repb != repe; ++repb) {
Argument const *arg = cast<const Argument>(repb->first);
deleted[arg->getArgNo()] = arg;
}
Function* NF = CloneFunction(F, replacements,
/*ModuleLevelChanges=*/false);
NF->setLinkage(GlobalValue::InternalLinkage);
F->getParent()->getFunctionList().push_back(NF);
for (Value::use_iterator ii = F->use_begin(), ee = F->use_end();
ii != ee; ) {
Value::use_iterator i = ii;
++ii;
User *U = *i;
CallSite CS(U);
if (CS) {
if (CS.getCalledFunction() == F) {
SmallVector<Value*, 6> args;
// Assemble the non-specialized arguments for the updated callsite.
// In the process, make sure that the specialized arguments are
// constant and match the specialization. If that's not the case,
// this callsite needs to call the original or some other
// specialization; don't change it here.
CallSite::arg_iterator as = CS.arg_begin(), ae = CS.arg_end();
for (CallSite::arg_iterator ai = as; ai != ae; ++ai) {
DenseMap<unsigned, const Argument*>::iterator delit = deleted.find(
std::distance(as, ai));
if (delit == deleted.end())
args.push_back(cast<Value>(ai));
else {
Constant *ci = dyn_cast<Constant>(ai);
if (!(ci && ci == replacements[delit->second]))
goto next_use;
}
}
Value* NCall;
if (CallInst *CI = dyn_cast<CallInst>(U)) {
NCall = CallInst::Create(NF, args.begin(), args.end(),
CI->getName(), CI);
cast<CallInst>(NCall)->setTailCall(CI->isTailCall());
cast<CallInst>(NCall)->setCallingConv(CI->getCallingConv());
} else {
InvokeInst *II = cast<InvokeInst>(U);
NCall = InvokeInst::Create(NF, II->getNormalDest(),
II->getUnwindDest(),
args.begin(), args.end(),
II->getName(), II);
cast<InvokeInst>(NCall)->setCallingConv(II->getCallingConv());
}
CS.getInstruction()->replaceAllUsesWith(NCall);
CS.getInstruction()->eraseFromParent();
++numReplaced;
}
}
next_use:;
}
return NF;
}
/// Replaces the given call site (Call or Invoke) with a gc.statepoint
/// intrinsic with an empty deoptimization arguments list. This does
/// NOT do explicit relocation for GC support.
static Value *ReplaceWithStatepoint(const CallSite &CS, /* to replace */
Pass *P) {
assert(CS.getInstruction()->getParent()->getParent()->getParent() &&
"must be set");
// TODO: technically, a pass is not allowed to get functions from within a
// function pass since it might trigger a new function addition. Refactor
// this logic out to the initialization of the pass. Doesn't appear to
// matter in practice.
// Then go ahead and use the builder do actually do the inserts. We insert
// immediately before the previous instruction under the assumption that all
// arguments will be available here. We can't insert afterwards since we may
// be replacing a terminator.
IRBuilder<> Builder(CS.getInstruction());
// Note: The gc args are not filled in at this time, that's handled by
// RewriteStatepointsForGC (which is currently under review).
// Create the statepoint given all the arguments
Instruction *Token = nullptr;
AttributeSet OriginalAttrs;
if (CS.isCall()) {
CallInst *ToReplace = cast<CallInst>(CS.getInstruction());
CallInst *Call = Builder.CreateGCStatepointCall(
CS.getCalledValue(), makeArrayRef(CS.arg_begin(), CS.arg_end()), None,
None, "safepoint_token");
Call->setTailCall(ToReplace->isTailCall());
Call->setCallingConv(ToReplace->getCallingConv());
// Before we have to worry about GC semantics, all attributes are legal
// TODO: handle param attributes
OriginalAttrs = ToReplace->getAttributes();
// In case if we can handle this set of attributes - set up function
// attributes directly on statepoint and return attributes later for
// gc_result intrinsic.
Call->setAttributes(OriginalAttrs.getFnAttributes());
Token = Call;
// Put the following gc_result and gc_relocate calls immediately after the
// the old call (which we're about to delete).
assert(ToReplace->getNextNode() && "not a terminator, must have next");
Builder.SetInsertPoint(ToReplace->getNextNode());
Builder.SetCurrentDebugLocation(ToReplace->getNextNode()->getDebugLoc());
} else if (CS.isInvoke()) {
InvokeInst *ToReplace = cast<InvokeInst>(CS.getInstruction());
// Insert the new invoke into the old block. We'll remove the old one in a
// moment at which point this will become the new terminator for the
// original block.
Builder.SetInsertPoint(ToReplace->getParent());
InvokeInst *Invoke = Builder.CreateGCStatepointInvoke(
CS.getCalledValue(), ToReplace->getNormalDest(),
ToReplace->getUnwindDest(), makeArrayRef(CS.arg_begin(), CS.arg_end()),
Builder.getInt32(0), None, "safepoint_token");
// Currently we will fail on parameter attributes and on certain
// function attributes.
OriginalAttrs = ToReplace->getAttributes();
// In case if we can handle this set of attributes - set up function
// attributes directly on statepoint and return attributes later for
// gc_result intrinsic.
Invoke->setAttributes(OriginalAttrs.getFnAttributes());
Token = Invoke;
// We'll insert the gc.result into the normal block
BasicBlock *NormalDest = normalizeBBForInvokeSafepoint(
ToReplace->getNormalDest(), Invoke->getParent());
Builder.SetInsertPoint(NormalDest->getFirstInsertionPt());
} else {
llvm_unreachable("unexpect type of CallSite");
}
assert(Token);
// Handle the return value of the original call - update all uses to use a
// gc_result hanging off the statepoint node we just inserted
// Only add the gc_result iff there is actually a used result
if (!CS.getType()->isVoidTy() && !CS.getInstruction()->use_empty()) {
std::string TakenName =
CS.getInstruction()->hasName() ? CS.getInstruction()->getName() : "";
CallInst *GCResult = Builder.CreateGCResult(Token, CS.getType(), TakenName);
GCResult->setAttributes(OriginalAttrs.getRetAttributes());
return GCResult;
} else {
// No return value for the call.
return nullptr;
}
}
bool ICFGBuilder::runOnModule(Module &M) {
MicroBasicBlockBuilder &MBBB = getAnalysis<MicroBasicBlockBuilder>();
forallbb(M, bb) {
for (mbb_iterator mi = MBBB.begin(bb), E = MBBB.end(bb); mi != E; ++mi)
getOrInsertMBB(mi);
}
forallbb(M, bb) {
for (mbb_iterator mi = MBBB.begin(bb), E = MBBB.end(bb); mi != E; ++mi) {
// The ICFG will not contain any inter-thread edge.
// It's also difficult to handle them. How to deal with the return
// edges? They are supposed to go to the pthread_join sites.
if (mi->end() != bb->end() && !is_pthread_create(mi->end())) {
FPCallGraph &CG = getAnalysis<FPCallGraph>();
FuncList callees = CG.getCalledFunctions(mi->end());
bool calls_decl = false;
for (size_t i = 0; i < callees.size(); ++i) {
Function *callee = callees[i];
if (callee->isDeclaration()) {
calls_decl = true;
} else {
MicroBasicBlock *entry_mbb = MBBB.begin(callee->begin());
addEdge(mi, entry_mbb);
}
}
if (calls_decl) {
mbb_iterator next_mbb = mi; ++next_mbb;
addEdge(mi, next_mbb);
}
} else {
for (succ_iterator si = succ_begin(bb); si != succ_end(bb); ++si) {
MicroBasicBlock *succ_mbb = MBBB.begin(*si);
addEdge(mi, succ_mbb);
}
TerminatorInst *ti = bb->getTerminator();
if (is_ret(ti)) {
FPCallGraph &CG = getAnalysis<FPCallGraph>();
InstList call_sites = CG.getCallSites(bb->getParent());
for (size_t i = 0; i < call_sites.size(); ++i) {
Instruction *call_site = call_sites[i];
// Ignore inter-thread edges.
if (is_pthread_create(call_site))
continue;
MicroBasicBlock *next_mbb;
if (isa<CallInst>(call_site)) {
BasicBlock::iterator next = call_site;
++next;
next_mbb = MBBB.parent(next);
} else {
assert(isa<InvokeInst>(call_site));
InvokeInst *inv = dyn_cast<InvokeInst>(call_site);
if (isa<ReturnInst>(ti)) {
next_mbb = MBBB.begin(inv->getNormalDest());
} else {
next_mbb = MBBB.begin(inv->getUnwindDest());
}
}
addEdge(mi, next_mbb);
}
}
}
}
}
return false;
}
void MemoryInstrumenter::instrumentMalloc(const CallSite &CS) {
DataLayout &TD = getAnalysis<DataLayout>();
TargetLibraryInfo& TLI = getAnalysis<TargetLibraryInfo>();
Function *Callee = CS.getCalledFunction();
assert(DynAAUtils::IsMalloc(Callee));
Instruction *Ins = CS.getInstruction();
// Calculate where to insert.
// <Loc> will be the next instruction executed.
BasicBlock::iterator Loc;
if (!Ins->isTerminator()) {
Loc = Ins;
++Loc;
} else {
assert(isa<InvokeInst>(Ins));
InvokeInst *II = cast<InvokeInst>(Ins);
assert(II->getNormalDest()->getUniquePredecessor());
Loc = II->getNormalDest()->getFirstInsertionPt();
}
IRBuilder<> Builder(Loc);
Value *Start = NULL;
Value *Size = NULL;
Value *Success = NULL; // Indicate whether the allocation succeeded.
StringRef CalleeName = Callee->getName();
if (CalleeName == "malloc" || CalleeName == "valloc") {
Start = Ins;
Size = UndefValue::get(LongType);
Success = Builder.CreateICmpNE(Ins, ConstantPointerNull::get(CharStarType));
} else if (CalleeName.startswith("_Zn")) {
Start = Ins;
Size = CS.getArgument(0);
} else if (CalleeName == "calloc") {
// calloc() takes two size_t, i.e. i64.
// Therefore, no need to worry Mul will have two operands with different
// types. Also, Size will always be of type i64.
Start = Ins;
assert(CS.getArgument(0)->getType() == LongType);
assert(CS.getArgument(1)->getType() == LongType);
Size = BinaryOperator::Create(Instruction::Mul,
CS.getArgument(0),
CS.getArgument(1),
"",
Loc);
Success = Builder.CreateICmpNE(Ins, ConstantPointerNull::get(CharStarType));
} else if (CalleeName == "memalign" || CalleeName == "realloc") {
Start = Ins;
Size = CS.getArgument(1);
Success = Builder.CreateICmpNE(Ins, ConstantPointerNull::get(CharStarType));
} else if (CalleeName == "strdup" || CalleeName == "__strdup") {
Start = Ins;
// Use strlen to compute the length of the allocated memory.
Value *StrLen = EmitStrLen(Ins, Builder, &TD, &TLI);
// size = strlen(result) + 1
Size = Builder.CreateAdd(StrLen, ConstantInt::get(LongType, 1));
Success = Builder.CreateICmpNE(Ins, ConstantPointerNull::get(CharStarType));
} else if (CalleeName == "getline") {
// getline(char **lineptr, size_t *n, FILE *stream)
// start = *lineptr
// size = *n
// succ = (<rv> != -1)
Start = Builder.CreateLoad(CS.getArgument(0));
Size = Builder.CreateLoad(CS.getArgument(1));
Success = Builder.CreateICmpNE(Ins, ConstantInt::get(Ins->getType(), -1));
} else {
assert(false && "Unhandled malloc function call");
}
// start = malloc(size)
// if (success)
// HookMemAlloc
// Loc:
instrumentMemoryAllocation(Start, Size, Success, Loc);
}
/// splitLiveRangesAcrossInvokes - Each value that is live across an unwind edge
/// we spill into a stack location, guaranteeing that there is nothing live
/// across the unwind edge. This process also splits all critical edges
/// coming out of invoke's.
/// FIXME: Move this function to a common utility file (Local.cpp?) so
/// both SjLj and LowerInvoke can use it.
void SjLjEHPass::
splitLiveRangesAcrossInvokes(SmallVector<InvokeInst*,16> &Invokes) {
// First step, split all critical edges from invoke instructions.
for (unsigned i = 0, e = Invokes.size(); i != e; ++i) {
InvokeInst *II = Invokes[i];
SplitCriticalEdge(II, 0, this);
// FIXME: New EH - This if-condition will be always true in the new scheme.
if (II->getUnwindDest()->isLandingPad()) {
SmallVector<BasicBlock*, 2> NewBBs;
SplitLandingPadPredecessors(II->getUnwindDest(), II->getParent(),
".1", ".2", this, NewBBs);
LPadSuccMap[II] = *succ_begin(NewBBs[0]);
} else {
SplitCriticalEdge(II, 1, this);
}
assert(!isa<PHINode>(II->getNormalDest()) &&
!isa<PHINode>(II->getUnwindDest()) &&
"Critical edge splitting left single entry phi nodes?");
}
Function *F = Invokes.back()->getParent()->getParent();
// To avoid having to handle incoming arguments specially, we lower each arg
// to a copy instruction in the entry block. This ensures that the argument
// value itself cannot be live across the entry block.
BasicBlock::iterator AfterAllocaInsertPt = F->begin()->begin();
while (isa<AllocaInst>(AfterAllocaInsertPt) &&
isa<ConstantInt>(cast<AllocaInst>(AfterAllocaInsertPt)->getArraySize()))
++AfterAllocaInsertPt;
for (Function::arg_iterator AI = F->arg_begin(), E = F->arg_end();
AI != E; ++AI) {
Type *Ty = AI->getType();
// Aggregate types can't be cast, but are legal argument types, so we have
// to handle them differently. We use an extract/insert pair as a
// lightweight method to achieve the same goal.
if (isa<StructType>(Ty) || isa<ArrayType>(Ty) || isa<VectorType>(Ty)) {
Instruction *EI = ExtractValueInst::Create(AI, 0, "",AfterAllocaInsertPt);
Instruction *NI = InsertValueInst::Create(AI, EI, 0);
NI->insertAfter(EI);
AI->replaceAllUsesWith(NI);
// Set the operand of the instructions back to the AllocaInst.
EI->setOperand(0, AI);
NI->setOperand(0, AI);
} else {
// This is always a no-op cast because we're casting AI to AI->getType()
// so src and destination types are identical. BitCast is the only
// possibility.
CastInst *NC = new BitCastInst(
AI, AI->getType(), AI->getName()+".tmp", AfterAllocaInsertPt);
AI->replaceAllUsesWith(NC);
// Set the operand of the cast instruction back to the AllocaInst.
// Normally it's forbidden to replace a CastInst's operand because it
// could cause the opcode to reflect an illegal conversion. However,
// we're replacing it here with the same value it was constructed with.
// We do this because the above replaceAllUsesWith() clobbered the
// operand, but we want this one to remain.
NC->setOperand(0, AI);
}
}
// Finally, scan the code looking for instructions with bad live ranges.
for (Function::iterator BB = F->begin(), E = F->end(); BB != E; ++BB)
for (BasicBlock::iterator II = BB->begin(), E = BB->end(); II != E; ++II) {
// Ignore obvious cases we don't have to handle. In particular, most
// instructions either have no uses or only have a single use inside the
// current block. Ignore them quickly.
Instruction *Inst = II;
if (Inst->use_empty()) continue;
if (Inst->hasOneUse() &&
cast<Instruction>(Inst->use_back())->getParent() == BB &&
!isa<PHINode>(Inst->use_back())) continue;
// If this is an alloca in the entry block, it's not a real register
// value.
if (AllocaInst *AI = dyn_cast<AllocaInst>(Inst))
if (isa<ConstantInt>(AI->getArraySize()) && BB == F->begin())
continue;
// Avoid iterator invalidation by copying users to a temporary vector.
SmallVector<Instruction*,16> Users;
for (Value::use_iterator UI = Inst->use_begin(), E = Inst->use_end();
UI != E; ++UI) {
Instruction *User = cast<Instruction>(*UI);
if (User->getParent() != BB || isa<PHINode>(User))
Users.push_back(User);
}
// Find all of the blocks that this value is live in.
std::set<BasicBlock*> LiveBBs;
LiveBBs.insert(Inst->getParent());
while (!Users.empty()) {
Instruction *U = Users.back();
Users.pop_back();
if (!isa<PHINode>(U)) {
MarkBlocksLiveIn(U->getParent(), LiveBBs);
} else {
// Uses for a PHI node occur in their predecessor block.
PHINode *PN = cast<PHINode>(U);
for (unsigned i = 0, e = PN->getNumIncomingValues(); i != e; ++i)
if (PN->getIncomingValue(i) == Inst)
MarkBlocksLiveIn(PN->getIncomingBlock(i), LiveBBs);
}
}
// Now that we know all of the blocks that this thing is live in, see if
// it includes any of the unwind locations.
bool NeedsSpill = false;
for (unsigned i = 0, e = Invokes.size(); i != e; ++i) {
BasicBlock *UnwindBlock = Invokes[i]->getUnwindDest();
if (UnwindBlock != BB && LiveBBs.count(UnwindBlock)) {
NeedsSpill = true;
}
}
// If we decided we need a spill, do it.
// FIXME: Spilling this way is overkill, as it forces all uses of
// the value to be reloaded from the stack slot, even those that aren't
// in the unwind blocks. We should be more selective.
if (NeedsSpill) {
++NumSpilled;
DemoteRegToStack(*Inst, true);
}
}
}